Search results for "continuity tester"

1. It can check the overall operating status of 6V 12V 24V battery. Battery testing can analyze the battery healthy status to calculate the actual cold cranking capability of the battery and the aging extent. Cranking test helps you test and analyze the starting motor, and the charging test is to check the charging system status to avoid damaging the battery. 2. The battery tester built in printer, equipped with standard thermal printer paper,can print the last test result of this battery tester directly. After the test is completed, you can easily print the test results, then paste it on the worksheet.Support the majority of vehicle battery standards, such as CCA, BCI,CA,MCA,JIS,DIN,IEC/EN/SAE,Suitable for all 1V -30V lead-acid batteries ranging from 100 to 2000 CCA, including regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries for the truck, boat, Car, motorcycles, lawn mowers and other gardening machines,etc. 3. This car battery load tester offers vehicle electrical safety through exceptionally polarity reverses connection protection. Fully Insulated Alligator Clips are built with user safety in mind through spark-free operation and reverse polarity protection. 4. It is easy-to-use and can get accurate results in seconds. The battery alternator tester can directly detect bad cell battery and test the battery that is losing power (as low as 1.0V), no need to full charge before testing. 5. Languages: Chinese, English, German, French, Japanese, Korean, Dutch, Russian, Spanish, Italian, Portuguese, Polish, Persian 6. System Voltage: 6-36Volts 7. Measure Standard: CCA:100-2000 BCI:100-2000 CA:100-2000 MCA:100-2000 JIS:26A17-24SH52 DIN:100-1400 IEC:100-1400 EN:100-2000 SAE:100-2000 8. Power supply: 3.7V lithium battery, 2000MA x 2Specification: Package Weight One Package Weight 2.35kgs / 5.18lb One Package Size 36cm * 28cm * 8cm / 14.17inch * 11.02inch * 3.15inch Qty per Carton 10 Carton Weight 22.05kgs / 48.61lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 10 pcs = 3480 pcs40HQ: 808 cartons * 10 pcs = 8080 pcs

Read more less

1. Power-on configuration: 5 preset items2. Expansion interface: USB transmission interface3. Language version: Chinese/English/Russian/Portuguese4. Screen size: 7 inches5. Screen resolution: 1024x600 high resolution6. Charging requirements: QC18W, 12V/1.5A7. Screen technology: IPS full viewing angle8. Battery specifications: 3.7V/8000mAh9. Interaction mode: capacitive touch screen10. Standby time: about 3 hours11. Charging time: about 5 hours12. Heat dissipation method: air cooling13. Power consumption of the whole machine: 10W14. Number of channels: 215. Probe magnification: 1X/10X/100X16. Analog bandwidth: 350MHz17. Hardware bandwidth limit: 150M/20M18. High resolution mode: 8bit-16bit19. Maximum sampling rate: 1GSPS20. Parameter measurement: 12 types21. Storage depth: 60Kpts22. Data can be exported and firmware upgraded via USB23. High-voltage design, capable of withstanding voltage of more than 400V at any gear without burning24. Three trigger modes: automatic, single, and regular. Single and regular modes can capture burst signals, and automatic mode is mainly used to measure periodic signals25. Built-in efficient control algorithm, automatic identification of signal characteristics26. Built-in 1Gbit storage space, capable of secondary analysis of saved signalsSpecification: Package Weight One Package Weight 1.60kgs / 3.54lb One Package Size 25cm * 20cm * 10cm / 9.84inch * 7.87inch * 3.94inch Qty per Carton 12 Carton Weight 20.20kgs / 44.53lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 12 pcs = 4572 pcs40HQ: 885 cartons * 12 pcs = 10620 pcs

Read more less

InstructionsThis product is a test wireless remote control frequency instrument, it can test the frequency of the remote control, can be clearly displayed;And can test the infrared induction is good or bad, lt is convenient for you to adjust the frequency you need when preparing the remote control. 1. "ON/OFF" is the power key for external frequency line test. The remote control that needs tobe tested will be emited close to this frequency meter(Placed in the test area), press the remotecontrol to open, you can test the frequency of the remote control, clearly displayed Frequencyvalue. (The effective test range is no more than 5CM. The closer the test area is, the moreaccurate the measured value will be;Car key frequency is generally divided into 320M HZ.434M HZ;868M HZ;) 2. "Lighting" is the key to turn on the front lighting; The front of the instrument is equipped withLED lighting, which is more convenient in bad light Place in use; 3. "INPUT" is an infrared input indicator. Will need to test the remote control with infrared light byclicking on it The red light shows that the infrared output of the remote control is normally emitted.lf the indicator is off. the Remote control infrared emitter failure, damage and other reasons; 4. "IR" is infrared receiving lamp;Matters Need AttentionWhen testing, some electronic signal interference sources should be avoidedsuch as: signal towers, base stations, telephone poles, sending and receivingText messages, etc.Specifications1. Model: CNBJ--501 2. Test range: 100M--1G HZ 3. Size: 150x75x30 (main part) 4. Weight: 205 grams 5. Working conditions: -10C -40 degree C 6. Relative humiditys: 80% 7. Storage conditions: -20 degree C -50 degree C 8. Relative humiditys: 85%Specification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 24cm * 15cm * 4cm / 9.45inch * 5.91inch * 1.57inch Qty per Carton 40 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 50cm * 32cm / 16.54inch * 19.69inch * 12.6inch Loading Container 20GP: 396 cartons * 40 pcs = 15840 pcs40HQ: 921 cartons * 40 pcs = 36840 pcs

Read more less

1. AC detects the MAX/MIN voltage, power frequency and duty cycle of the circuit under test, while DC volts detects the voltage value of the circuit under test2. Resistance test and diode test mode: detects the resistance between the probe of the circuit under test and the auxiliary ground; while the diode test can quickly test the operation of the diode component and determine whether it is conductive3. Extra-long detection cable 6m: covers the vehicle from the front to the back, you can easily check the entire circuit system4. Current overload protection: When the current is overloaded, it will automatically disconnect the protection circuit to reduce unnecessary losses5. Multi-language options: English, German, Spanish, French, Italian, Russian, Portuguese6. Display: TFT color display (160 x 128 dpi)7. External power supply: 12 or 24V power supply is provided by the vehicle battery8. Dimensions: 28x47x1789. Weight: 1.2 kgPacking list:- V200 circuit tester- Probe tip- 20ft extension cable- Battery connection clip- Cigarette lighter adapter- User manual- BoxSpecification: Package Weight One Package Weight 1.22kgs / 2.70lb One Package Size 28cm * 25cm * 10cm / 11.02inch * 9.84inch * 3.94inch Qty per Carton 3 Carton Weight 4.80kgs / 10.58lb Carton Size 30cm * 27cm * 32cm / 11.81inch * 10.63inch * 12.6inch Loading Container 20GP: 1028 cartons * 3 pcs = 3084 pcs40HQ: 2388 cartons * 3 pcs = 7164 pcs

Read more less

1. Built-in high-precision electromagnetic radiation sensor and microcontroller chip processor can quickly and accurately measure the electromagnetic radiation value.2. Electric field detection, magnetic field detection, high-frequency detection. The magnetic field detection function can combine X/Y/Z signal detection of the actual field strength, with precise and sensitive measurement.3. Dual alerts, when the alarm value is exceeded, sound and light display alarm. When the measurement value is less than 0.12uT (12mg), the display screen turns green. When the measurement value is less than 0.40uT (4.0mG), the display screen turns orange. When the measurement value is greater than or equal to 0.40uT (4.0mG), the display screen turns red.4. USB lithium battery direct charging, no need to replace the battery, convenient and durable.5. Clear digits, large font display, data reading is more intuitive.6. Soft and comfortable hand feel, durable, waterproof, dustproof, environmentally friendly and safe, easy to clean.7. Size: 142 x 72 x 26mm8. Weight: approximately 150gSpecification: Package Weight One Package Weight 0.31kgs / 0.69lb One Package Size 20cm * 12cm * 7cm / 7.87inch * 4.72inch * 2.76inch Qty per Carton 50 Carton Weight 16.60kgs / 36.60lb Carton Size 52cm * 33cm * 38cm / 20.47inch * 12.99inch * 14.96inch Loading Container 20GP: 408 cartons * 50 pcs = 20400 pcs40HQ: 949 cartons * 50 pcs = 47450 pcs

Read more less

CNBJ-707 is a quick go/no-go tester for relays that provides you with an indication of the general health and functioning of the most common Automotive relays. Tester will check for proper functioning of the relay contacts by connecting the car battery (11V--15V) to the relay coil. Tester will watch the pin configuration,the time to contacts closure and opening, consistency of the relay during each test session, Tester will light the GREEN LED if all passed during the test session,if not light theRED LED. Operating Instructions: 1. Connect the power leads to the car battery -- black alligator clip to negative terminal, red alligator clip to positive terminal. 2. Tester is powered up when the LED illuminates in RED. 3. Check the relay before plugging into the tester. If it is a 4 pin relay, select "4 pin" on the tester.If it is a 5 pin relay, select "5 pin" on the tester. 4. Plug in the relay into one of the three receptacles. 5. Press the "Test" button. 6. Tester will check the pin configuration of the unknown relay. Tester will light the RED LED if the unkonwn relay is not the same to the most of common automotive relaysor the pin of the unknown relay is destroyed. 7. Tester will open and close the relay 10 times for testing the time to contacts closure and opening if the pin configuration of the relay is right. Tester will light the RED LED immediately if the time is overtime. 8. Tester will check the consistency of the relay after testing the time to contacts closure and opening ten times. Tester will light the GREEN LED if the test passed, if not light the RED LED. 9. Disconnect power leads from the car battery and remove relay from the tester. Attention: 1. The car battery must be 12V battery, and the voltage of the battery is among 11V-15V. 2. Ideal for coil resistance above 20 ohms.Specification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 30cm * 18cm * 4cm / 11.81inch * 7.09inch * 1.57inch Qty per Carton 40 Carton Weight 10.20kgs / 22.49lb Carton Size 62cm * 37cm * 42cm / 24.41inch * 14.57inch * 16.54inch Loading Container 20GP: 276 cartons * 40 pcs = 11040 pcs40HQ: 642 cartons * 40 pcs = 25680 pcs

Read more less

1. It is mainly used for testing the DC parameters of manifold semiconductors such as diode, transistor, controlled silicon and field effect transistor.It also can be used to test the with stand voltage of capacitor, protection voltage of varistor and isolation of electrica. 2. Measuring forward voltage, reverse voltage, forward saturation voltage drop, amplification factor, reverse leakage current of various crystal diode, audion, silicon controlled rectifier(SCR), field effect transistor(FET). 3. Measuring rated working voltage of chemical capacitor, terylene capacitor, capacitor, Leaded multilayer ceramic capacitor, high voltage lacker. 4. Measuring protection voltage of varistor. 5. Data hold, low battery warning.Specification: Package Weight One Package Weight 0.74kgs / 1.63lb One Package Size 26cm * 15cm * 7cm / 10.24inch * 5.91inch * 2.76inch Qty per Carton 30 Carton Weight 25.65kgs / 56.55lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 30 pcs = 10440 pcs40HQ: 808 cartons * 30 pcs = 24240 pcs

Read more less

1. Dual color backlight display, orange light indicates high voltage2. LED jack indicator light, do not worry about inserting the wrong probe3. NCV non-contact voltage detection4. 220V full gear automatic anti burning, safe and convenient operation5. Automatic shutdown after 5 minutes without operationParameters:1. Safety level: CAT III 1000V, CAT IV 600V2. Measurement function: capacitance, resistance, DC current, AC current, AC voltage, DC voltage, temperature3. Features: automatic range, on-off test, diode test, data retention, automatic shutdown4. DC voltage range: 600mV-1000V5. AC voltage range: 600mV-750V6. DC current range: 600uA-10A7. AC current range: 600uA-10A8. Capacitance range: 10nF-100 mF9. Maximum display: 600010. Battery type: 2 x AA batteries (not included)11. Size: 18.8x8.8x5.8cm12. Net weight: 350gSpecification: General Certificate CE, EMC Package Weight One Package Weight 0.54kgs / 1.19lb One Package Size 20cm * 13cm * 6.5cm / 7.87inch * 5.12inch * 2.56inch Qty per Carton 30 Carton Weight 17.40kgs / 38.36lb Carton Size 42cm * 40cm * 34cm / 16.54inch * 15.75inch * 13.39inch Loading Container 20GP: 466 cartons * 30 pcs = 13980 pcs40HQ: 1083 cartons * 30 pcs = 32490 pcs

Read more less

1. Sleep-wake activation method: New technology for cycle testing, twice as fast as traditional cycle testers. One-click automatic cycling with automatic parameter matching2. Resolves efficiency and cycle testing issues with encrypted batteries in the IP11-16 series after replacing battery cells; automatically displays a pop-up window upon first startup, eliminating the need for manual battery setup; automatically updates data; batteries remain stable after repair, with no pop-ups, error messages, or reboots; low power consumption3. One-click automatic cycling and battery cable read/write functions to quickly restore battery efficiency. Automatically matches parameters based on different battery models, with dual-channel independent battery cycling4. Package list: main unit x 1, Type-C cables x 2, adapters x 2, user manual x 15. Size: about 9 x 8.3cm6. Weight: about 57.5gSpecification: General Compatible with Apple: iPhone 16, iPhone 16 Plus, iPhone 16 Pro Max, iPhone 16 Pro, iPhone 15 Plus, iPhone 15 Pro Max, iPhone 15 Pro, iPhone 14 Plus, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 19cm * 13cm * 6cm / 7.48inch * 5.12inch * 2.36inch Qty per Carton 60 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 60 pcs = 24720 pcs40HQ: 958 cartons * 60 pcs = 57480 pcs

Read more less

1. Scope of use: all car lead-acid starter batteries, including ordinary full liquid, EFB, AGM flat battery, AGM wound battery, GEL battery, etc. 2. Suitable for: car factories, garages, car battery manufacturers, car battery agents, educational institutions, DIY enthusiasts, etc. 3. Test range: CCA100-2000, 30-200Ah 4. Test results: SOH, SOC, CCA value, IR, start-up and charging system, etc. 5. Test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB 6. Voltage measurement range: 7-30VDC 7. Working temperature: -20 degrees to 50 degrees 8. Power: 2W-5W 9. Voltage: 2-30V 10. Housing material: ABSSpecification: Package Weight One Package Weight 0.37kgs / 0.82lb One Package Size 12cm * 6cm * 5cm / 4.72inch * 2.36inch * 1.97inch Qty per Carton 80 Carton Weight 25.90kgs / 57.10lb Carton Size 38cm * 32cm * 28cm / 14.96inch * 12.6inch * 11.02inch Loading Container 20GP: 783 cartons * 80 pcs = 62640 pcs40HQ: 1818 cartons * 80 pcs = 145440 pcs

Read more less

1. Start-up measurement, intelligent identification, non-contact measurement 2. Three-in-one multimeter + electric tester + phase sequence detector 3. Phase sequence induction detection: put the nibs close to the phase line ABC test points respectively, the green indicator light turns on, and the screen displays R, indicating that it is forward direction; the result, the red indicator light turns on, and the screen displays L, indicating that it is reverse direction 4. Line breakpoint detection: In the NCV non-contact voltage detection mode, check the breakpoint position along the line when the single-strand line is charged 5. Fine stainless steel watch needle: the negative input terminal is closely connected with the test lead, which is firm and durable, and is suitable for circuit maintenance and testing of various electrical appliances and small electronic components 6. In NCV mode, when a nearby AC voltage is detected, the LED indicator light will be red, and an alarm buzzer will sound, making it safer to measure electricity without contact 7. Intelligent identification of neutral and live wires: Select the function of distinguishing live neutral and live wires, insert the pen needle into the hole for identification, no need for traditional contact measurement methods, and it is safer to measure electricity 8. Portable and compact, easy to use, pen-style design 9. Detachable positive pen tip: silver-plated, anti-oxidation, not easy to break and wear, just clamp the stainless steel pen tip with pliers and rotate it out, equipped with a cap protection 10. Battery type: 2 x AAA batteries (not included in the product) 11. Screen display: HD backlit screen 12. AC/DC voltage: 600V 13. Measurement function: resistance, AC voltage, DC voltage 14. Counting: 4000 counts 15. Resistance: 40 megohms 16. Dimensions: 183.5 x 24 x 29mm 17. Weight: 57gSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 20cm * 5cm * 5cm / 7.87inch * 1.97inch * 1.97inch Qty per Carton 190 Carton Weight 19.40kgs / 42.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 190 pcs = 52630 pcs40HQ: 644 cartons * 190 pcs = 122360 pcs

Read more less

1. 100% brand new and high quality. 2. Small and lightweight, easy to carry. 3. Display devices use high bright LED digital tube, stunning display effect. 4. With reverse polarity protection, reverse not burned. 5. The voltmeter only two wires, wiring simple and reliable performance. 6. Measuring Range: DC 15-120V. 7. Operation temperature: -10~65 degrees Celsius. 8. Red wire is connected to positive pole, and black wire to negative pole.Specification: General Model V40D Material ABS Measure Range DC 15-120V Voltage Operating Temperature -10 ~ 65 Degree Celsius Cable Length 18cm Refreshing Rate LCD Display 2*1.4cm Size 40*25*20mm Weight 22.5g Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 7cm * 3cm * 2.5cm / 2.76inch * 1.18inch * 0.98inch Qty per Carton 500 Carton Weight 15.00kgs / 33.07lb Carton Size 37cm * 32cm * 27cm / 14.57inch * 12.6inch * 10.63inch Loading Container 20GP: 834 cartons * 500 pcs = 417000 pcs40HQ: 1936 cartons * 500 pcs = 968000 pcs

Read more less