Search results for "boat mount"

1. Material: cold rolled steel2. Scope of application: shoe cabinet, flip drawer, etc3. One-piece stamping molding, no seams, beautiful and solid4. The material is durable and not easy to corrode5. Smooth surface, rustproof and beautiful, long service life6. Partition spacing freely adjustable, according to the specific needs of the choice of empty space7. Strong load-bearing capacity, not easy to deform and fracture8. Specifications: single layer, double layer, three layers9. Weight: single layer 230g/pair; double layer 354g/pair; three layer 540g/pairNote: delivery only flip rack and its accessories, does not contain other itemsSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 25cm * 16cm * 5cm / 9.84inch * 6.3inch * 1.97inch Qty per Carton 20 Carton Weight 7.00kgs / 15.43lb Carton Size 50cm * 37cm * 27cm / 19.69inch * 14.57inch * 10.63inch Loading Container 20GP: 533 cartons * 20 pcs = 10660 pcs40HQ: 1239 cartons * 20 pcs = 24780 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.78kgs / 6.13lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz, GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain 65dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Automatic Gain Control >20dB Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <2 MTBF >50000h Power Supply AC:90~265V, 50/60Hz; DC:12V 2A Power Consumption <20W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 3.78kgs / 8.34lb One Package Size 39cm * 22cm * 20cm / 15.35inch * 8.66inch * 7.87inch Qty per Carton 4 Carton Weight 15.90kgs / 35.05lb Carton Size 51cm * 45cm * 45cm / 20.08inch * 17.72inch * 17.72inch Loading Container 20GP: 258 cartons * 4 pcs = 1032 pcs40HQ: 599 cartons * 4 pcs = 2396 pcs

Read more less

1. Material: Hardware + Electronics + Plastic2. Remote Control Frequency: 2.4G3. Usage Time: Approximately 30 minutes4. Charging Time: Approximately 2-2.5 hours5. Battery Specifications: 7.6V/600mAh6. Charging Type: USB7. Remote Control Battery: 2xAA (Not included in this product)8. Remote Control Distance: Approximately 60 meters9. The boat features a power-on function when submerged and a power-off function when out of water, with two speed settings.10. When the indicator light on the boat or remote control flashes after approximately 30 minutes of use, it indicates that the boats battery is low and needs charging.Specification: Package Weight One Package Weight 0.96kgs / 2.13lb One Package Size 42cm * 14cm * 12cm / 16.54inch * 5.51inch * 4.72inch Qty per Carton 12 Carton Weight 12.52kgs / 27.60lb Carton Size 58cm * 44cm * 38cm / 22.83inch * 17.32inch * 14.96inch Loading Container 20GP: 274 cartons * 12 pcs = 3288 pcs40HQ: 638 cartons * 12 pcs = 7656 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED 3G signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/ 60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.79kgs / 6.15lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Read more less

Details:1. Material: Aluminum alloy2. Weight: about 628 grams for outer wiring 30.9 mm, about 650 grams for outer wiring 31.6 mm, about 653 grams for inner wiring 30.9 mm, and about 679 grams for inner wiring 31.6 mm3. Length: 375 mm for outer wiring, 400 mm for inner wiring4. Specification: 43x42mm,5. Stroke: 100 mm6. Wall thickness: 3mm7. Diameter: 30.9/31.6mm8. The length of the internal cable: 170 mm (can be cut according to the bicycle)9. Applicable models: road bikes, mountain bikes, etc.10. Color: blackFeatures:1. Double-nail rear drift design, both screws use 10.9 torque, the screw locking is more stable2. Sealing ring design, rainproof and dustproof, protect the seat tube, and will not leak oil3. The lifting seat tube adopts oil pressure system with high lubricity4. The suspension rod will not be affected by the side5. Coil springs provide proper compression and rebound damping, making riding easier6. There is a fine adjustment screw on the bottom, which has been adjusted and no adjustment is required7. The material is durable and easy to installSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 41cm * 5cm * 4cm / 16.14inch * 1.97inch * 1.57inch Qty per Carton 42 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 42 pcs = 7434 pcs40HQ: 412 cartons * 42 pcs = 17304 pcs

Read more less

Parameter:1. Material: aluminum alloy bracket + stainless steel outer ring2. Thickness: about 1.8 mm3. Diameter: 140 / 160 / 180 / 203 mm4. Weight: 83 / 109 / 136 / 176 g (corresponding to the upper diameter)5. Application: road bikes, mountain bikes, etc. (standard 6-hole installation, hole core diameter 44 mm)Features:1. Full CNC engraving and milling, electroplating and coloring, anti-oxidation2. Stamping and forming, high hardness, no abnormal brake sound3. Corrosion resistant, not easy to rust4. Hollow design, strong decontamination and drainage5. Beautiful and practical, simple and convenient installationSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 17cm * 17cm * 1cm / 6.69inch * 6.69inch * 0.39inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs40HQ: 412 cartons * 242 pcs = 99704 pcs

Read more less

1. Unit weight: About 0.3 kg2. Size: About 36 × 17.8 cm, the thickness of the door buckle is about 4.5 cm, and the height of the hook is about 1.9 cm3. Material: Carbon steel4. Style: Simple and modern5. Scope of application: Can hang bags, coats, umbrellas, keys and other objects6. Features: Unique shape, beautiful and practical, easy installation, 6-hook design, good load-bearing capacity, double hooks can bear about 4 kg, the hooks can be removed for convenient storage, and various uses7. Note: Does not include other items in the pictureSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 37cm * 19cm * 6cm / 14.57inch * 7.48inch * 2.36inch Qty per Carton 12 Carton Weight 4.50kgs / 9.92lb Carton Size 40cm * 39cm * 32cm / 15.75inch * 15.35inch * 12.6inch Loading Container 20GP: 534 cartons * 12 pcs = 6408 pcs40HQ: 1240 cartons * 12 pcs = 14880 pcs

Read more less

1. Light weight, net weight 0.29kg. 2. Round corner design, protect user and stabilizer. 3. Silicone pad is designed in the clamping position to prevent the stabilizer from being pinched. 4. Designed with cold shoes on the top of the product, can be connected with other photographic equipment. 5. There have external connect holes, can be connected to a variety equipment to assist shooting.Specification: General Compatible with DJI: RONIN-SC Package Weight One Package Weight 0.38kgs / 0.84lb One Package Size 22cm * 16cm * 5cm / 8.66inch * 6.3inch * 1.97inch Qty per Carton 36 Carton Weight 15.50kgs / 34.17lb Carton Size 47cm * 42cm * 26cm / 18.5inch * 16.54inch * 10.24inch Loading Container 20GP: 519 cartons * 36 pcs = 18684 pcs40HQ: 1206 cartons * 36 pcs = 43416 pcs

Read more less

Why to use1. Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save life of somebody. 2. Unfortunately, there are still some places where one can find themselves out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: 1) Parking lots, tunnels 2) Big stores, office buildings 3) Cars, boats etc. 4) House in remote areas etcFeatures1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode. 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableHow to work1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax). 2. After the signal is accepted by the phone amplifier, the device amplifies it. 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna. 4. And after that, the amplified signal transmits to the cell phoneHow to install1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar). 2. Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signalNotes1. Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least. 2. Indoor and outdoor antenna must be separated by wallTechnique supports1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 53-57dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 2A Power Consumption <5W RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 100mm x 45mm x 18mm Weight 350g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.59kgs / 3.51lb One Package Size 51cm * 18cm * 13cm / 20.08inch * 7.09inch * 5.12inch Qty per Carton 4 Carton Weight 5.75kgs / 12.67lb Carton Size 53cm * 38cm * 28cm / 20.87inch * 14.96inch * 11.02inch Loading Container 20GP: 472 cartons * 4 pcs = 1888 pcs40HQ: 1097 cartons * 4 pcs = 4388 pcs

Read more less

IntroductionThank you for purchasing our car HUD Head Up Display. HUD is for drivers' safety, at high speeds, especially in high-speed driving at night, in order to avoid the driver to look down their head to watch the instrument, and decrease car accident. HUD is in extremely critical moment reflects its delicate care. HUD can project the dashboard information (such as speed) onto the windshield, it can not only to help determine the speed of inexperienced novice to control their speed and avoid many of the speed limit road due to speeding violation. More importantly, it enables the driver instantly read the number in great vision and always make drivers eyes on the road in clear mind.HUD main features1. Plug and play. HUD can automatically adapt to vehicle type which in line with OBDII or EUOBD(On-Board Diagnostic System). 2. Comprehensive display. HUD can display many parameters at the same time as follows, vehicle speed, engine speed, water temperature (voltage, throttle valve position, ignition advance angle, time of 100 km acceleration),fuel consumption, mileage, low fuel tips, engine failure. 3. Three display mode. Driver can chose normal display mode, high- speed display mode and automatic display mode. 4. Free switch. Km and mile can be switched freely. 5. Suitable size. The display area is 5.5 inches which is very clear for driver to read data. 6. Automatic power on and off. Starting with the vehicle starting, stopping with the vehicle stopping to protect the vehicle's battery. Moreover, HUD can also power on and power off by manual, which is more easy to control HUD. 7. Flexible alarm mode. HUD can offer single-stage and four-stage overspeed alarm modes to choose to make driving safer. 8. Engine speed alarm. It contributes to shift gear in time to save fuel also has significance to new driver. 9. Flexible brightness adjustment. The brightness can be adjusted automatically or manually to reach the best state which is in harmony with the environment.Specification: General Certificate CE, RED Model X3 Bluetooth Material ABS Display Size 5.5 inch Display Type LCD Application Car Alarm Sound Level 30db and above Display Content Fuel Consumption & Over Speed Alarm & Water Temperature & Engine Failure etc. Power Current Working: 180mA Input Voltage DC 9-18V Working Voltage DC 9-16V Standby current less than 3mA Work Environment Work Temperature -35 to 80 degree celsius Dimension Size 150*85*14mm Weight 110g Package Inlude Packing Contents 1 x HUD Host 1 x OBD Cable 1 x Anti-slip Mat Package Weight One Package Weight 0.53kgs / 1.17lb One Package Size 18cm * 14cm * 5cm / 7.09inch * 5.51inch * 1.97inch Qty per Carton 30 Carton Weight 10.00kgs / 22.05lb Carton Size 54cm * 30cm * 28cm / 21.26inch * 11.81inch * 11.02inch Loading Container 20GP: 587 cartons * 30 pcs = 17610 pcs40HQ: 1364 cartons * 30 pcs = 40920 pcs

Read more less

1. The LED light is equipped with 4 10W high-intensity CREE LED chips.2. Die-cast aluminum housing can withstand harsh environments for strength and durability. Our LED spotlights can be used for 50,000 hours and are waterproof, dustproof, shockproof and corrosion resistant up to IP67 rating for harsh environments.3. In order to obtain better heat dissipation effect, the LED light bar adopts aviation aluminum alloy as the shell, which can achieve the best heat dissipation effect and the best heat sealability. It extends the life of the light bar by over 50,000 hours.4. Using the included adjustable mounting accessories, the LED spotlight can be adjusted to approximately 90 degrees. This makes it easy to change the direction of the beam. Once installed, the bulb can slide.5. The LED spotlight strip is compatible with almost all motorcycles, jeeps, 4x4s, trucks, tractors, trailers, golf carts, pickups, cars, motorcycles, SUVs, ATVs and boats. In addition, there are many indoor and outdoor uses: garden lighting, backyard lighting, reversing lights, off-road lighting, reversing lights, architectural lighting, etc.6. Parameters:Lamp beads: CREEPower: 20WLumen: 2000LMColor temperature: 6000KVoltage: DC9-80VMaterial: High thermal conductivity CNC aluminumRange: effective light distance 200 metersSpecification: Package Weight One Package Weight 0.38kgs / 0.83lb One Package Size 10cm * 10cm * 9cm / 3.94inch * 3.94inch * 3.54inch Qty per Carton 50 Carton Weight 21.00kgs / 46.30lb Carton Size 52cm * 46cm * 22cm / 20.47inch * 18.11inch * 8.66inch Loading Container 20GP: 506 cartons * 50 pcs = 25300 pcs40HQ: 1176 cartons * 50 pcs = 58800 pcs

Read more less