Search results for "battery tester accessories"

1. Module parameters:- Power supply voltage: DC4.5-6V (micro USB interface)- Working current: no more than 70mA- Discharge voltage: 1.00V-15.00V Resolution 0.01V- End voltage range: 0.5-11.0V- Support through current: no more than 3.000A resolution 0.001A- Voltage measurement error: less than 1% + 0.02V- Current measurement error: less than 1.2% +-0.002A- Battery capacity range: 9999Ah (1Ah = 1000mAh) 2.2. When the value is large, it is switched by decimal point shift. When it is less than 10Ah, it will be displayed as X.XXX, when it reaches more than 10Ah, it will be displayed as XX.XX, and so on.3. Circuit board size: 50mmX37mm4. Finished product size: 50mmX37mmX17mm (Length X Width X Height, including copper foot height)5. Weight of board and accessories: single board 28g (including copper pillar), two 5W ceramic resistors 9g, 50W resistor about 27g (including wire)6. Note: In order to improve the voltage measurement accuracy, this circuit is specially designed with DC bias. When the terminal is connected nothing, a small voltage will be displayed, which does not affect the actual measurement. 0V) will display 0. If you want to understand the principle, you can check the superposition theorem in electrical engineering.7. How to use:- The battery under test should be fully charged first.- Connect the positive pole of the battery under test to the input positive pole, and the negative pole to the negative pole of the input. Connect the load to the output positive pole and the output negative pole, and connect the tester micro USB with working power (not available for desktop or notebook USB power supply). The battery voltage is displayed at this time.- To start the test directly, just press the “OK” button, the tester can automatically formulate a suitable termination voltage according to the full charge voltage of the battery, and will flash the display 3 times to start the test. Need to manually set the termination voltage, just press the "+" or "-" button to modify in the battery voltage display state, the termination voltage is displayed at the beginning of P, the back represents the voltage value, the resolution is 0.1V, after setting, press "OK" "start testing.- After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, the display data stays above the capacity (Ah) and flashes quickly with the corresponding indicator light, the displayed capacity is the actual discharge capacity of the battery, press it "OK" can stop the flashing and let the data display stably. Press the "OK" button again to restore to the state of just powering up and replace the battery to test the next section ...8. Error code and meaning:- Err1: The battery voltage is higher than 15V- Err2: The battery voltage is lower than the set termination voltage- Err3: The battery cannot bear the load discharge current or the line internal resistance is too large- Err4: Current is too large (current exceeds 3.1A)- Err5: Improper use or wiring error has caused the device to burn down and cannot be used (current sampling or control switch MOS burned)9. Note: If the battery is reversed, when the load is turned on and the load current is large (about> 0.8A), the circuit switch tube may be damaged!10. Secondary calibration operation: Press and hold three buttons to power on the tester at the same time, enter the calibration mode, first display the number of calibration records, then enter the formal calibration sampling program to display 0u0A, then short-circuit the input positive and negative poles and press "OK "Button to complete displaying J10u, apply a standard DC voltage of 10.00V between the input positive and negative electrodes, press the" OK "button, and then display J2.0A, apply to the output negative electrode (inflow direction) and input negative electrode (outflow direction) After a constant DC current of 2.0A, press the "OK" button once to complete the calibration. The tester will pre-check the calibration data. If the calibration data is reliable, it will display 4 calibration numbers in turn and then exit. If the pre-audit believes that the data is not reliable, discard the data and exit.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 23.00kgs / 50.71lb Carton Size 50cm * 50cm * 46cm / 19.69inch * 19.69inch * 18.11inch Loading Container 20GP: 231 cartons * 500 pcs = 115500 pcs40HQ: 538 cartons * 500 pcs = 269000 pcs

Read more less

Features1. The product has reverse connection protection, it will not burn out if it is reversed 2. Lead-acid battery Lithium battery is universal and can be adjusted through the buttons on the back 3. It can display battery symbol + percentage or battery symbol + voltmeter, the two display modes can be switched at will 4. The product has only two wires, simple wiring, equipped with a wiring socket, and the wire length is 300mm 5. All battery specifications and function selections are set through the buttons on the back, no electric soldering iron is requiredSpecification1. Work voltage: 10-100V 2. Work current: Less than 5mA 3. Sleep current: 12uA (12V test) 4. Display: LCD with backlit 5. Suitable for: 3-27 x 3.7V Lithium Batteries; Lead Acid Batteries 12V, 24V, 36V, 48V, 60V, 72V, 84V 6. Dimensions: 61.3 x 33.3 x 13.5mm 7. Mounting hole Size: 58.5 x 28.5mm 8. Wire Length: 30cmSpecification: Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 12cm * 6cm * 2cm / 4.72inch * 2.36inch * 0.79inch Qty per Carton 400 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 42cm * 32cm / 19.69inch * 16.54inch * 12.6inch Loading Container 20GP: 396 cartons * 400 pcs = 158400 pcs40HQ: 921 cartons * 400 pcs = 368400 pcs

Read more less

1. Adopt high-definition LCD screen design to provide clear and bright display from all angles.2. Monitor battery capacity and voltage with this mini tester.3. Blue backlight, easy to read value in dark environment.4. Widely used in cars, motorcycles, scooters, bicycles, power banks, testing equipment, etc.5. Check the remaining capacity of the battery, and directly display the battery capacity symbol and percentage.6. The instrument has the characteristics of accurate and stable, small size and easy to carry.7. Material: ABS8. Voltage measurement range: DC8V-100V9. Working current: less than 15MA10. Measurement accuracy: +/-1%11. Display: LCD screen12. Measuring speed: about 2 times per second.13. Size: about 6.5x3.5x1.5cm / 2.6x1.4x0.6in14. Installation size: about 58 x 28mm / 2.3x1.1in15. Lead Length: 20cm / 7.9inSpecification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 140 Carton Weight 30.00kgs / 66.14lb Carton Size 41cm * 25cm * 20cm / 16.14inch * 9.84inch * 7.87inch Loading Container 20GP: 1300 cartons * 140 pcs = 182000 pcs40HQ: 3019 cartons * 140 pcs = 422660 pcs

Read more less

1. Size: 55 x 52 x 23 mm 2. Weight: 33 grams 3. Fits For Testing: - 9V Batteries - 1.5V Button cells - 1.5V Regular or rechargeable batteries,??(Batteries are not included)?? Features: 1. Compact size and light weight 2. Good companion for travel 3. Easy-to-read color-code scale indicates power level , tells you instantly the condition of the battery 4. One movable arm to accommodate the battery 5. Two buttons on the side for testing 9 volt batteriesSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 29.00kgs / 63.93lb Carton Size 50cm * 50cm * 58cm / 19.69inch * 19.69inch * 22.83inch Loading Container 20GP: 183 cartons * 500 pcs = 91500 pcs40HQ: 426 cartons * 500 pcs = 213000 pcs

Read more less

If you want to replace your old battery tester, why not try this high quality BT-168D ABS Digital Battery Tester Black & Red which is a good assistant for each professional. It features high quality material and easy operation even for green hand. It will quickly test the capacity of your battery as you wish. What is more, made of high quality ABS, it has solid construction which is durable to use for a long time. With clear LCD digital screen, you can see the situation easily. So what are you waiting for? Buy it now! Features: 1) New and high quality 2) High sensitivity 3) Compact and portable 4) Anti-slip design, easy to use 5) It will quickly test the capacity of your battery as you wish 6) You can see the situation easily with clear LCD digital screen Specifications: 1) Model: BT-168D 2) Color: Black,Red 3) Material: ABS 4) Display: LCD Screen 5) Dimensions: 10.8cm x 6cm x 2.4cm 6) Weight: 2.4 oz / 68 g 7) Test batteries types: - 1.5V AAA, AA, HP16, MN2400, R03, HP7, MN1500, UM3, C, HP11, MN1400, SP11, LR14, UM2, D, HP2, MN1300, SP2, R20, UM1 - 9V PP3, MN1604, 6F22, 006P 8) Package Includes: -1 x Battery TesterSpecification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 11cm * 6.5cm * 2cm / 4.33inch * 2.56inch * 0.79inch Qty per Carton 100 Carton Weight 8.50kgs / 18.74lb Carton Size 50cm * 35cm * 30cm / 19.69inch * 13.78inch * 11.81inch Loading Container 20GP: 507 cartons * 100 pcs = 50700 pcs40HQ: 1179 cartons * 100 pcs = 117900 pcs

Read more less

1. Power off save, low voltage alarm, timing display, reverse connection protection2. Real-time monitoring, smart chip, precision fine-tuning3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Waterproof grade: IPX78. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-72v / 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61.3x33.3x16.2mm16. Weight: about 27gSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs

Read more less

1) Test batteries types: **1.5V AAA, AA, HP16, MN2400, R03, HP7, MN1500, UM3, C, HP11, MN1400, SP11, LR14, UM2, D, HP2, MN1300, SP2, R20, UM1 **9V PP3, MN1604, 6F22, 006P 2) Portable and useful 3) Never need to guess the battery level again 4) Three colored indicators give accurate and easy battery power reading 5) Size: 120*7*35mmSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb Qty per Carton 100 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 35cm * 30cm / 19.69inch * 13.78inch * 11.81inch Loading Container 20GP: 507 cartons * 100 pcs = 50700 pcs40HQ: 1179 cartons * 100 pcs = 117900 pcs

Read more less

1.Simple and useful voltage and current USB multimeter supports QC2.0 fast charging, and lets you clearly know the charging status of your device at the same time, so that it can display voltage, current, time and capacity of your device by LCD.2.The USB multimeter can be used as a charger detector for your car charger, mobile power, desktop PC, tablet, laptop, mobile phone, charger, etc. Which can ensure the safety of the cargo.3. The item can store data automatically when the power is off, and you can reset the data by pressing reset for about 3s.4.Only for USB 2.05. No battery, no on / off switch, plug and play6.Voltage range: 3.5-20V7.Resolution: 0.01V 0.01A 1mAhSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 13.5cm * 7.5cm * 1.6cm / 5.31inch * 2.95inch * 0.63inch Qty per Carton 500 Carton Weight 14.00kgs / 30.86lb Carton Size 90cm * 59cm * 15cm / 35.43inch * 23.23inch * 5.91inch Loading Container 20GP: 334 cartons * 500 pcs = 167000 pcs40HQ: 777 cartons * 500 pcs = 388500 pcs

Read more less

1. Mainly used to test various battery voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, discharge energy, power consumption and running time, and display the measurement data through the LCD screen.2. Voltage:- Measuring range: 0-200V. (When the test voltage is less than 8V, please use the independent power supply method)- Display format: less than 10V display such as: 9.99VBelow 100V such as: 99.9VMore than 100V display such as: 199V- Minimum resolution: 0.01V-Start test voltage: 0.05V- Measurement accuracy: 1%3. Current:- Measuring range: 0-10A (Model: PZEM-013)0-300A (Model: PZEM-015)- Display format: less than 1A display as: 999mALess than 10A is displayed as: 9.99aLess than 100A is displayed as: 99.9AGreater than or equal to 100A is displayed as: 199A- Minimum resolution: 1mA-Initial test current: 10mA (Model: PZEM-013)20mA (Model: PZEM-015)- Measurement accuracy: 1%4. Power:- Measuring range: 0-2000W (Model: PZEM-013)0-60000W (Model: PZEM-015).-Display format: less than 10W display as: 9.99WLess than 100W displayed as: 99.9WLess than 1000W displayed as: 999WLess than 10000W display as: 9.99kWGreater than or equal to 10000W displayed as: 19.9kw- Minimum resolution: 0.01W-Initial test power: 0.1W (Model: PZEM-013)0.2W (Model: PZEM-015)- Measurement accuracy: 1%5. Impedance:- Measuring range: 0-1000Ohm- Display format: less than 100Ohm displayed as: 99.9OhmGreater than or equal to 100Ohm displayed as: 999ohmWhen the test range is exceeded or the current is zero, "---" is displayed.- Minimum resolution: 0.1ohm- Measurement accuracy: 1%6. Internal resistance:- Measuring range: 0-999Milliohm-Display format: 999Milliohm When the test range is exceeded or the current is zero, "---" is displayed.- Minimum resolution: 1Milliohm- Measurement accuracy: 1%Note: Before testing the internal resistance, you need to preset the full voltage according to the battery type, and you can test it after it is fully charged; if it is not fully charged, you can set the no-load battery to the full voltage, and then test it; the internal resistance is not a fixed value, the more the battery is discharged, the more The more, the higher the resistance.7. Capacity:- Measuring range: 0-1000Ah- Display format: less than 1AH is: 999mAHLess than 10Ah displayed as: 9.99 AhLess than 100AH ??is displayed as: 99.9ahLess than 1000AH is displayed as: 999AH- Minimum resolution: 1mAH- Measurement accuracy: 1%8. The discharge energy is represented by the battery symbol, with a total of 10 grids, and each grid represents 10% of the power.9. Energy- Measuring range: 0-9999kWh-Display format: less than 1kWh display as: 999WhLess than 10kWh displayed as: 9.99kwhLess than 100kWh is displayed as: 99.99kwhLess than 1000kWh is displayed as: 999.99kWhGreater than or equal to 1000kWh displayed as: 9999kWhReturn to zero on overflow- Minimum resolution: 1Wh- Measurement accuracy: 1%Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs40HQ: 412 cartons * 242 pcs = 99704 pcs

Read more less

1. Monitoring voltage: 4-28V2. Monitoring current: 0-7A3. Monitoring power: 0-120W4. D+/D- voltage: 0-3.3V5. Dimensions: 42x13x82mm6. Compatible with all interfaces, with 5P high-current USB-A, 24P all 7. Pin TYPE-C input and output interfaces, charging detection8. 2.0-inch LCD high-definition display, the measurement data is clearly visible9. 0.00001 low resolution, real-time detection of subtle changes in voltage, power and power during charging10. Support automatic protocol detection, PD2.0, PD3.0, PPS, QC2.0, QC3.0, QC4, FCP, SCP, AFC, PE, DASH VOOC, SuperVOOC, etc.11. Simple display interface, independent function menu, humanized operation12. Four functional curve display, cable detection13. 10 groups of energy records, battery capacity can be calculated by formula14. Driver-free installation, efficient and convenient data synchronization, Bluetooth APP overvoltage and overcurrent alarmSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 6cm * 4cm / 3.94inch * 2.36inch * 1.57inch Qty per Carton 318 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 318 pcs = 56286 pcs40HQ: 412 cartons * 318 pcs = 131016 pcs

Read more less

Description:1. Type: digital voltage measuring instrument2. Voltage: 4-30V3. Current: 0-5.1A4. Power: 0-155W5. Internal temperature: 0-80 degrees6. Timing: 0-99 hours7. Grouping: Groups 0-98. Ambient temperature: 50 (degree C)9. Size: 5.3x2.6 cmFeatures:1. Real-time monitoring, safe and reliable, timekeeping, sleeping at night is no longer overheated, voltage monitoring does not damage the battery, both front and back can be inserted2. Quickly double-click the button to rotate the display for easy viewing.3. Safety plugs can be used as long as they are USB-C/Type-C interfaces, such as notebooks, various mobile phone charging plugs, desktop computers, etc.4. Rejects oxidation and rust, suitable for a variety of environments, aluminum alloy joints, precision built. Effectively avoid oxidation and rust5. Strong interface, sensitive contact, aluminum alloy material, built-in aluminum alloy plate, anti-friction and anti-rust for many times6. Clear screen. The charging speed is clear at a glance. With the USB monitor, the status when charging is clear and the numbers are clearly visible.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 13cm * 5cm * 3cm / 5.12inch * 1.97inch * 1.18inch Qty per Carton 500 Carton Weight 23.00kgs / 50.71lb Carton Size 50cm * 50cm * 46cm / 19.69inch * 19.69inch * 18.11inch Loading Container 20GP: 231 cartons * 500 pcs = 115500 pcs40HQ: 538 cartons * 500 pcs = 269000 pcs

Read more less

1. Four operation modes: constant current operation; constant voltage operation; constant power operation; constant resistance operation2. This time, a flexible input wiring port design is adopted. Users can manually connect different adapters to achieve different measurement functions to extend the functions3. Automatically generate measurement data reports, stop voltage and time-limited discharge4. First turn off the load switch "OFF", measure the current battery no-load voltage, and then turn on the load switch "ON" through the setting key. At this time, you can read the internal resistance parameters of the current battery. The internal resistance of this table is calculated by the formula: (no-load voltage-load voltage)/current current=battery internal resistance5. Long press the setting key, and then short press the setting key when it flashes to switch to time-limited discharge for timing setting to obtain the effect of worry-free discharge aging. The time-limited discharge can be set to count down for any length of 1-99 hours and 59 minutes. When the set time is reached, the discharge will automatically stop. It can be used as a timer to turn off the constant current discharge aging functionReal-time display of internal and external dual temperature measurement data, three intelligent safety protections6. Test various USB data cables/chargers. First, use a data cable to connect the corresponding interface of the load device, and then use the DC power cable and Android cable to connect to the "Micros input detection port". Then adjust the current by setting the button to detect the voltage drop of the data cable and the performance stability of the charger.7. Test various DC power adapters, and the 2.4-inch high-definition large color screen displays data clearly.8. The four-wire wiring method, the voltage measurement is not affected by the voltage drop of the wire, making the voltage measurement more accurate.9. Easily test various data such as voltage/current/capacity of various lithium batteries/batteries.10. Long-term 180W load discharge aging test, the temperature is kept at about 50-80 degrees.11. Adopting intelligent temperature control light effect fan design, built-in large discharge tube, more powerful and more reliable, test the overall capacity of the battery, usage time, aging performance, etc.Online method:1. For Apple mobile phone APP: Please search E_test directly in the App Store to download and install, then click the Bluetooth APP icon to open the software, click the Bluetooth icon above the software to enter and select DL24-BLE to connect, and you can realize the remote wireless remote control setting and measurement function of the mobile phone. You can check the discharge status on the mobile phone at any time, various data cleaning can be seen, discharge voltage, current and power curves, etc. (No need to pair Bluetooth separately, just select DL24 directly from the software Bluetooth icon)2. Applicable to Android mobile phone APP: Scan the QR code on the back of the host to download the corresponding APP software. After installation, open the software and click the Bluetooth icon to enter and directly select DL24-BLE to successfully connect and use (no need to pair Bluetooth separately, just select DL24 directly from the software Bluetooth icon)3. Computer wired connection APP: After the host is powered on, use the data cable provided to connect to the computer USB port, then install the CH340 serial port driver, and then scan the QR code on the back of the host to download the corresponding APP software. After installation, open the software and select the newly installed serial port model to successfully connect and use. Of course, this APP style with installation method is also compatible with the serial port devices of Bluetooth devices4. Computer Bluetooth wireless connection APP: First add the Bluetooth device as the serial port device of DL24-SPP on the computer, then scan the QR code on the back of the host to download the corresponding APP software and store it. You can directly open the software and select the newly added Bluetooth serial port model to successfully connect and use it without installation.Specification: Package Weight One Package Weight 0.84kgs / 1.86lb One Package Size 21cm * 21cm * 15cm / 8.27inch * 8.27inch * 5.91inch Qty per Carton 4 Carton Weight 4.50kgs / 9.92lb Carton Size 44cm * 23cm * 32cm / 17.32inch * 9.06inch * 12.6inch Loading Container 20GP: 823 cartons * 4 pcs = 3292 pcs40HQ: 1911 cartons * 4 pcs = 7644 pcs

Read more less