Search results for "WiFi Booster"

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 15-19dBm, Downlink 15-19dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 186 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.39kgs / 3.07lb One Package Size 31cm * 20cm * 11cm / 12.2inch * 7.87inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 42cm * 33cm * 24cm / 16.54inch * 12.99inch * 9.45inch Loading Container 20GP: 801 cartons * 4 pcs = 3204 pcs40HQ: 1861 cartons * 4 pcs = 7444 pcs

Read more less

Why to use1. Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save life of somebody. 2. Unfortunately, there are still some places where one can find themselves out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: 1) Parking lots, tunnels 2) Big stores, office buildings 3) Cars, boats etc. 4) House in remote areas etcFeatures1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode. 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableHow to work1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax). 2. After the signal is accepted by the phone amplifier, the device amplifies it. 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna. 4. And after that, the amplified signal transmits to the cell phoneHow to install1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar). 2. Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signalNotes1. Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least. 2. Indoor and outdoor antenna must be separated by wallTechnique supports1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 53-57dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 2A Power Consumption <5W RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 100mm x 45mm x 18mm Weight 350g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.59kgs / 3.51lb One Package Size 51cm * 18cm * 13cm / 20.08inch * 7.09inch * 5.12inch Qty per Carton 4 Carton Weight 5.75kgs / 12.67lb Carton Size 53cm * 38cm * 28cm / 20.87inch * 14.96inch * 11.02inch Loading Container 20GP: 472 cartons * 4 pcs = 1888 pcs40HQ: 1097 cartons * 4 pcs = 4388 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.58kgs / 3.48lb One Package Size 31cm * 23cm * 11cm / 12.2inch * 9.06inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 48cm * 33cm * 24cm / 18.9inch * 12.99inch * 9.45inch Loading Container 20GP: 701 cartons * 4 pcs = 2804 pcs40HQ: 1628 cartons * 4 pcs = 6512 pcs

Read more less

Feature1. The tri-band router not only has a higher network speed, but more importantly, it makes the device connection more calm. You can allocate the use of each frequency band according to your habits, and the devices of different frequency bands are used in different categories without interfering with each other. 2. Built-in game accelerator, optimal global acceleration node, effectively reduces game delay and freeze, reduces packet loss, improves PC, console and other multi-platform game experience, and shortens the download time of large games. 3. Support targeted management of the familya mobile phones, tablets and other Internet devices, filter bad URLs and harmful information; also set the usage rights and duration of popular apps, prevent children from indulging in games, short videos, comics, and develop a healthy habit of surfing the Internet . 4. Adopt Qualcomm new generation A73 architecture, 4-core 2.2GHz. It releases a surging computing power of more than 40,000, which is twice the performance of the previous generation flagship processor IPQ8074A (A53 4-core 2.2GHz), and can easily handle dozens of G data transmission and multi-thread task processing. 5. 12 high-gain antennas are equipped with 12 high-power signal amplifiers to increase the signal transmission power and improve the receiving sensitivity at the same time. Super wall-penetrating effect, bringing a good signal to the whole house. 6. USB3.0 high-speed interface, external hard disk can meet the needs of light NAS. Thanks to the powerful processing performance, the transfer rate can reach up to 300MB/s. With 10G and 2.5G network ports, the transfer experience far exceeds that of ordinary Gigabit NAS. Support mobile phone remote download, Baidu network disk download, Samba LAN sharing, Time Machine backup and other functions. 7. Support fast network connection through NFC, no need to remember passwords, let alone enter passwords, and enjoy a fun and fast way to connect to the Internet with visitors and friends. 8. Equipped with dual 10G network ports, it supports free switching between WAN/LAN, and the SFP+ network port can support up to 10G optical/electrical module access, which is easy to implement Whole house 10G optical fiber/network cable networking. The 10G network port is used with 10G NAS to bring an ultra-high-speed 10G transmission experience. 9. Support stable access of 1000+ devices, new support for Docker, which greatly improves playability and scalability; large cache space provides more stable conditions for 10G data transmission and high-speed USB 3.0 transmission. 10. Four 2.5G network ports, support IPTV and game network port customization functions, can not only directly connect game consoles, TVs, computers, meet the high-quality audio and video needs of game players, but also support dual WAN/dual LAN up to 5Gbps aggregation , to fully release the performance of dual 2.5G NAS. 11. The air duct designed by professional thermal simulation, equipped with ultra-quiet fans, and self-developed intelligent temperature control algorithm can automatically adjust the speed according to the power consumption of the whole machine, escorting the flagship performance! Keep the network stable and not stuck.SpecificationsHardware Configuration: 1. Processor: Qualcomm Quad Core A73 2.2GHz 2. Memory: 2GB 3. 2.4G: Wi-Fi 4x4 (theoretical maximum rate can reach 1376.4Mbps) 4. 5.2G: Wi-Fi 4x4 (theoretical maximum rate can reach 5764.8Mbps) 4. 5.8G: Wi-Fi 4x4 (theoretical maximum rate can reach 2882.4Mbps) 5. Antenna: External high-gain antenna + NFC built-in antenna 6. Heat dissipation: active heat dissipation 7. Machine interface: - 4x10/100/1000/2500M adaptive WAN/LAN port - 1x10/100/1000/2500/5000/10000M adaptive WAN/LAN port - 1x1000M/2500M/10000M SFP+Ethernet port - 1xUSB 3.0 port 8. LED indicators: 9 (SYSTEM indicator x 1, INTERNET indicator x 1, network port lights x 6, atmosphere lights x 1) 9. System reset button: 1 10. Power input interface: 1 11. Mesh button: 1 Wireless Parameters: 1. Tri-band: 2.4GHz, 5.2GHz, 5.8GHz 2. Wireless channel: - 2.4GHz Channel: 1,2,3,4,5,6,7,8,9,10,11,12,13 - 5.2GHz Channel: 36,40,44,48,52,56,60,64 - 5.8GHz Channel: 149,153,157,161,165 Software Parameters: 1. Wireless security: WPA-PSK/WPA2-PSK/WPA3-SAE encryption, wireless access control (black and white list), SSID hiding, intelligent anti-fraud network 2. Management application: support Web, Android, IOS Working Environment: 1. Working environment temperature: 0-40 degrees Celsius 2. Working humidity: 10%-90%RH (non-condensing) 3. Storage temperature: -40-70 degrees Celsius 4. Storage humidity: 5%-90%RH (non-condensing)Specification: Package Weight One Package Weight 3.77kgs / 8.31lb One Package Size 36cm * 31cm * 22cm / 14.17inch * 12.2inch * 8.66inch Qty per Carton 1 Carton Weight 4.50kgs / 9.92lb Carton Size 38cm * 33cm * 24cm / 14.96inch * 12.99inch * 9.45inch Loading Container 20GP: 886 cartons * 1 pcs = 886 pcs40HQ: 2056 cartons * 1 pcs = 2056 pcs

Read more less

1. Brand new and high quality. 2. Easy to install. 3. Usable indoors. 4. Enhance and maintain excellent signal quality.Specification: General Material Plastic Standard 2.4GHz WiFi Frequency Range 2400-2500MHz Gain 12dBi Input Power 50W Input Impedance 50 ohms Connector Types SMA Male Size 12.3x7.5x1.5cm Weight 47g Package Include Package Contents 1 x Antenna Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 17cm * 9.8cm * 1.7cm / 6.69inch * 3.86inch * 0.67inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 35cm * 36cm / 16.54inch * 13.78inch * 14.17inch Loading Container 20GP: 503 cartons * 200 pcs = 100600 pcs40HQ: 1169 cartons * 200 pcs = 233800 pcs

Read more less

1. Brand new and high quality. 2. Easy to install. 3. Usable indoors. 4. Enhance and maintain excellent signal quality.Specification: General Material Plastic Standard 5.8GHz WiFi Frequency Range 2400-2483MHz / 5150-5850MHz Gain 12dBi Input Power 50W Input Impedance 50 ohms Connector Types SMA Male Size 12.3x7.5x1.5cm Weight 47g Package Include Package Contents 1 x Antenna Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 17cm * 9.8cm * 1.7cm / 6.69inch * 3.86inch * 0.67inch Qty per Carton 200 Carton Weight 13.80kgs / 30.42lb Carton Size 42cm * 35cm * 36cm / 16.54inch * 13.78inch * 14.17inch Loading Container 20GP: 503 cartons * 200 pcs = 100600 pcs40HQ: 1169 cartons * 200 pcs = 233800 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.78kgs / 6.13lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED 3G signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/ 60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.79kgs / 6.15lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Read more less

1. Protocol standard: IEEE 802.11n, IEEE 802.11 b/g.2. The password for "WiFi" cannot contain any special characters.3. Common VGA display equipment: Projector, Monitor, TV sets and so on. 4. Ultra-small design, is the first choice to carry.5. Size: 15x10x7cmSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 15cm * 10cm * 7cm / 5.91inch * 3.94inch * 2.76inch Qty per Carton 40 Carton Weight 23.80kgs / 52.47lb Carton Size 42cm * 25cm * 30cm / 16.54inch * 9.84inch * 11.81inch Loading Container 20GP: 846 cartons * 40 pcs = 33840 pcs40HQ: 1965 cartons * 40 pcs = 78600 pcs

Read more less

1. 2.4GHz & 5GHz dual band : this wireless network card adopts dual band of 2.4GHz and 5GHz to make it suitable for different situations. 2. High speed transmission: 150Mbps of 2.4GHz is suitable for large range and long distance WiFi, 433Mbps of 5GHz is suitable for short distance, interference-free WiFi. 3. Safe network: the built-in encryption WEP WPA WPA2 help you lock your WiFi from being stolen. 4. Free sharing: this wireless network adapter allows you to share your network with others with no cable tangling problem. 5. Wide compatibility: suitable for XP/WIN7/WIN8/WIN10/Mac/Linux.Specification: General Model EP-AC1661 Types Wireless Adapter Material Metal, Plastic Interface USB 2.0 Wireless Security 64/128 Bit WEP WPA2 WPA Standard 802.11a/b/g/n/ac Support System Windows XP, Windows 7, Windows 8, Windows 8.1, Windows 10, Linux, Mac OS Weight 13g Package Include Package Contents 1 x Wireless Adapter 1 x User Manual 1 x Antenna 1 x CD Driver Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 13.5cm * 12.2cm * 1.5cm / 5.31inch * 4.8inch * 0.59inch Qty per Carton 100 Carton Weight 6.70kgs / 14.77lb Carton Size 40cm * 30cm * 26cm / 15.75inch * 11.81inch * 10.24inch Loading Container 20GP: 854 cartons * 100 pcs = 85400 pcs40HQ: 1984 cartons * 100 pcs = 198400 pcs

Read more less

1. Supports mainstream 4G LTE frequency bands (Band 8: 900MHz, Band 3: 1800MHz), compatible with major network providers and IoT devices.2. Smart Life APP control with AGC/ALC technology: Remotely monitor host status in real-time via Smart Life software. Features Automatic Gain Control (AGC) and Automatic Level Control (ALC) to dynamically adjust output based on scenarios, prolonging equipment lifespan and saving energy.3. High stability in complex environments: Automatic gain control system ensures stable signal output, minimizing call drops or network delays. Suitable for challenging scenarios like thick-walled buildings or underground spaces.4. Application scenarios: Signal-weak areas such as homes, offices, basements, and warehouses.5. Frequency bands:--900MHz (Uplink: 880-915MHz, Downlink: 925-960MHz)--1800MHz (Uplink: 1710-1785MHz, Downlink: 1805-1880MHz)Packaging List:Main Unit, Log-Periodic Antenna, Ceiling-Mounted Antenna, 3-meter Feeder CableSpecification: Package Weight One Package Weight 2.50kgs / 5.52lb One Package Size 37cm * 25cm * 21cm / 14.57inch * 9.84inch * 8.27inch Qty per Carton 1 Carton Weight 2.50kgs / 5.51lb Carton Size 37cm * 25cm * 21cm / 14.57inch * 9.84inch * 8.27inch Loading Container 20GP: 1372 cartons * 1 pcs = 1372 pcs40HQ: 3186 cartons * 1 pcs = 3186 pcs

Read more less

* Application place of mobile phone signal amplifier: 1) Small regions signal blind or weak signal area, such as underground or semi-underground place of business, basements, underground parking, etc. 2) Small-scale hot-spot signal Complaints areas, such as conference rooms, a small supermarket, small shopping malls, the office and small public areas, etc. 3) Traffic and large social influence areas, such as bars, cafes, dance halls, cafes, fitness clubs,leisure and entertainment, etc. 4) Home, office, luxury yachts, private cars, public security system and road safety management, etc. * Specifications: 1) Up-link frequency: 890-915MHz 2) Down-link frequency: 935-960MHz 3) Up-link Gain: 70 dB 4) Down-link Gain: 75 dB 5) Gain adjustable range: MGCa?￥30dB 6) Output power(dBm): a?￥20 7) Pass band ripple: GSM 4dB 8) Guard band rejection: GSM (BW-60dB)a?¤42 MHz (BW-70dB)a?¤45 MHz 9) I/O impedance: 50/N Connector 10) I/O return loss: a?¤-10dB 11) Noise figure: a?¤-8dB 12) Intermodulation attenuation (Po=13 dBm): a?￥40dBc 13) Transmission delay: a?¤0.5us 14) Ambient temperature: -10 Degree C ???50 Degree C 15) Power supply: AC110???220V?±10% 45???55Hz 16) Size: 200mm*140mm*40mm 17) Product weight: 1.06kg 18) Coverage: approx. 50 square meters indoors. 19) Antenna: 50x8x2.2cm * Characteristic: 1) Fully integrated 900 MHz antenna system 2) Powerful amplifier enables up to + 85 dB of signal gain including cable loss 3) Intelligent signal processing and real time adaptive operation 4) Automatically adjusts power levels as needed to ensure a consistent coverage footprint 5) Reprogrammable (in the field) enabling spectrum or carrier reconfigurations as needed 6) Auto-Trac LED diagnostics displays aid install and operation 7) Patented algorithms and adaptive processing ensure our products will not interfere with other wireless frequencies or radio devices * The package contains: 1) 70dB GSM Cellular Phone Signal Amplifier 2) 8 dB outdoor antenna 3) 2.5 dB indoor antenna 4) 10m cable 5) Mounting accessories: AC power supply, user manualSpecification: Package Weight One Package Weight 3.70kgs / 8.16lb One Package Size 41cm * 31cm * 19cm / 16.14inch * 12.2inch * 7.48inch Qty per Carton 2 Carton Weight 7.40kgs / 16.31lb Carton Size 53cm * 38cm * 22cm / 20.87inch * 14.96inch * 8.66inch Loading Container 20GP: 601 cartons * 2 pcs = 1202 pcs40HQ: 1397 cartons * 2 pcs = 2794 pcs

Read more less