WAVESHARE
-
WAVESHARE WAVESHARE 2.4GHz Wi-Fi Mini Development Board Based ESP32-S3 Dual-Core Processor, No Pin Header, Soldered Pin Header
1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)3. Built-in 512KB SRAM and 384KB ROM, stacked with 4MB Flash and 2MB PSRAM or 8MB Flash and 8MB PSRAM4. Features a stamp-hole design and onboard ceramic antenna for easy integration into user-designed baseboards5. Supports flexible clock and individual module power settings for low-power modes in various scenarios6. Integrated USB serial port full-speed controller with 24 GPIOs for flexible peripheral configuration7. Features 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, and 2 x ADC peripherals8. Supports MicroPython, ESP-IDF, and Arduino9. Compact size, using a half-hole design for easy integration with other motherboards.10. Multiple low-power operating modes meet the power consumption requirements of Internet of Things (IoT), mobile devices, wearable electronic devices, smart home applications, etc.11. Press and hold the BOOT (GPIO0) button before connecting the Type-C cable each time firmware is downloaded.12. When powered by an external power source, input 3.7V~6V power at the half-hole marked with 5V.13. Dimensions: 18x23.5mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 14.30kgs / 31.53lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs40HQ: 1040 cartons * 264 pcs = 274560 pcs
£5.99 - £8.99
-
Waveshare Waveshare Industrial Grade Serial Server RS232/485 to WiFi / Ethernet, RJ45 Network Port, RJ45 Network Port with POE Support
Features:1. RS232/485 device data collector/IoT gateway specially designed for industrial environments.2. Integrate multiple functions into one, including serial port server, Modbus gateway, MQTT gateway, serial port to HTTPD client, etc.3. The module has RS232, RS485, WIFI, and Ethernet interfaces, which can realize serial to WIFI, serial to WIFI and other functions; Ethernet, Ethernet to WIFI, etc.4. Multiple onboard power interfaces support a wide range of 6~36V power supply, and can be equipped with PoE function.5. Industrial-grade metal shell design supports wall-mounted and rail-mounted installation. It is small in size and easy to install.6. Suitable for data collection, IoT gateway, security IoT, smart instrument monitoring and other applications.Product parameters:1. Frequency band: 2.412-2.484 GHz2. Wireless network: Station / AP / AP+Station mode3. Security mechanism: WPA-PSK / WPA2-PSK4. Encryption type: TKIP/AES5. Transmission power:802.11b: +19dBm (max @11Mbps)802.11g: +18dBm (max @54Mbps)802.11n: +17dBm (maximum @HT20, MCS7); +17dBm (maximum @HT40, MCS7)6. Receiving sensitivity:802.11b: -89dBm (@11Mbps)802.11g: -81dBm (@54Mbps)802.11n: -73dBm (@HT20, MCS7); -71dBm (@HT40, MCS7)7. Baud rate: 300-460800 bps8. Check digit: none, odd, even, mark, space9. Data bits: 5-9 bits10. Flow control: RTS/CTS N/A11. Protocol: TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP/MQTT12. Configuration: host, browser, serial AT command13. Communication method: TCP/IP direct communication, VCOM14. Working mode: transparent transmission, serial port command, HTTPD Client, Modbus TCP to Modbus RTU15. Working temperature: minus 40 degrees Celsius - 85 degrees Celsius16. Humidity range: 5%-95% relative humidity17. Product size: 85 x 84 x 24mm18. Weight: 157g, 169gPacking list:RJ45 network port:-RS232/485 to WIFI Ethernet (B) x1-2.4G WiFi antenna x1-Rail mounting buckle x1-Screwdriver x1-Screw pack x1RJ45 network port supporting POE:-RS232/485 to WIFI POE ETH (B) x1-2.4G WiFi antenna x1-Rail mounting buckle x1-Screwdriver x1-Screw pack x1Specification: Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 18cm * 14cm * 4cm / 7.09inch * 5.51inch * 1.57inch Qty per Carton 32 Carton Weight 7.50kgs / 16.53lb Carton Size 38cm * 30cm * 34cm / 14.96inch * 11.81inch * 13.39inch Loading Container 20GP: 687 cartons * 32 pcs = 21984 pcs40HQ: 1597 cartons * 32 pcs = 51104 pcs
£27.99 - £30.99
-
Waveshare Waveshare MG996R Servo, Metal Gear, High Torque
1. Product: MG996R Servo2. Torque: 9kg/cm(4.8V), 11kg/cm(6V)3. Speed: 0.19s/60°(4.8V), 0.18s/60°(6V)4. Rotate angle: 180°5. Operating voltage: 4.8 ~ 6V6. Gear: metal7. Dead band: 5us8. Weight: 55g9. Dimension: 40.7mm × 19.7mm × 42.9mmSpecification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 10cm * 7cm * 4cm / 3.94inch * 2.76inch * 1.57inch Qty per Carton 300 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 35cm * 40cm / 23.62inch * 13.78inch * 15.75inch Loading Container 20GP: 317 cartons * 300 pcs = 95100 pcs40HQ: 736 cartons * 300 pcs = 220800 pcs
£3.99
-
WAVESHARE Waveshare Core1262-868M Anti-Interference SX1262 LoRa Module, EU868 Band
About The ProductThe Core1262-868M is a LoRa core module which incorporates new-generation SX1262 chip. It has featuress including mini size, long range transmission, high anti-interference capability, and so on. The module uses EU868 band, combined with LoRa gateway, it can be connected to servers like TTN server to build LoRa network. 1. New-generation SX1262, higher power efficiency and longer transmission distance than the traditional SX1278 2. EU868 band, combined with LoRa gateway, quick connection to cloud servers like TTN server 3. Comes with rich development resources and manual (examples for STM32, Raspberry Pi Pico)Specifications1. RF chip: SX1262 2. Frequency range: EU868 (863~870MHz) 3. Modulation: LoRa/(G)FSK 4. Data rate: 0.018~62.5Kbps (LoRa), 0.6~300Kbps ((G)FSK) 5. Emit power: More than 14dBm 3.3V 6. Spreadind factor: SF5 ~ SF12 7. Operating voltage: 3.3V 8. Module power consumption: Emitting current: 45mA 14dBm; receiving current: 5.3mA 125KHz 9. Communication bus: SPI 10. Operating temperature: -40 ~ 85 degree C 11. Connector: Castellated edge / solder holes 12. Dimensions: 21.00 x 52.00mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 1000 pcs = 328000 pcs40HQ: 763 cartons * 1000 pcs = 763000 pcs
£7.99
-
WAVESHARE Waveshare Mini Base Board A for Raspberry Pi Compute Module 4, Base Board A For Raspberry Pi CM4
1. USB: - USB 2.0 x 2 - USB 2.0 x 2 (via FFC connector) 2. GPIO: Raspberry Pi 40 PIN GPIO x 1 3. Header: M.2 slot x 1 4. HD media interface: HDMI x 2, 1x via FFC connector, support 4K 30fps output 5. DSI display: MIPI DSI x 1 (15pin 1.0mm FPC) 6. CSI camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC) 7. Power input: 5V 8. FAN: 5V / 12V (no fan control) 9. RJ45 Ethernet: Gigabit Ethernet 10. CM4 slot: Suitable for all variants of Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 12. Size: 85.0 x 56.0mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 12.60kgs / 27.78lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£16.99
-
WAVESHARE Waveshare HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping
Features1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. Onboard dual HR8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use 3. 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 4. Adjustable motor drive current via potentiometer, maximum 2.5A current output 5. Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO) 6. Integrates 5V regulator, allows providing power to Raspberry Pi 7. Onboard multi connector options for stepper motors in different specifications 8. Comes with development resources and manual (examples in BCM2835, wiringPi, and python)Specifications1. Motor controller: HR8825 2. Motor drive voltage: 8.2V~28V 3. Motor drive current: 2.5A 4. Logic voltage: 3.3V 5. Mounting hole size: 3.0mm 6. Size: 65 x 56mmPackage List1. Stepper Motor HAT (B) x 1 2. RPi screws pack (2pcs) x 1 3. Aluminum heatsink x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£11.99
-
Waveshare Waveshare Solar Panel (6V 5W), 16158
Specifications1.Solar cell type: 156 monocrystalline cell2.Surface: toughened glass3.Frame material: anodic oxidation aluminum alloy4.Back board material: 0.25mm PET5.Power: 5.0W ± 5%6.Operating voltage: 6.0V ± 5%7.Operating current: 833mA ± 5% (max)8.Open circuit voltage: 7.2V ± 5%9.Short circuit current: 916mA ± 5%10.For use with: Solar Power ManagerNote: specifications above are tested on standard condition: 1000W/m2 radiation intensity, 25℃, AM1.5 air quality.Specification: Package Weight One Package Weight 0.73kgs / 1.61lb One Package Size 25cm * 21cm * 4cm / 9.84inch * 8.27inch * 1.57inch Qty per Carton 25 Carton Weight 18.30kgs / 40.34lb Carton Size 61cm * 50cm * 40cm / 24.02inch * 19.69inch * 15.75inch Loading Container 20GP: 218 cartons * 25 pcs = 5450 pcs40HQ: 507 cartons * 25 pcs = 12675 pcs
£9.99
-
WAVESHARE WAVESHARE ESP32-P4-WIFI6 7-Inch Five-Point Touchscreen Development Board 1024x600 Resolution, Basic, Includes OV5647 Camera
Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 23.30kgs / 51.37lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs40HQ: 1197 cartons * 48 pcs = 57456 pcs
£49.99 - £57.99
-
Waveshare Waveshare Gigabit/2.5G Dual Ethernet Industrial Computer Based On Raspberry Pi CM5, 4 x RS485, 2×RS485+2×RS232
1. CM5 socket: Compatible with all versions of Compute Module 5 2. Networking: 1000M Ethernet RJ45 interface, 2500M Ethernet RJ45 interface 3. USB: USB 3.2 Gen1 x 1; USB 2.0 interfaces x 3 4. Video: HDMI interface x 1, supports 4K output 5. M.2: M.2 M KEY (PCIe Gen2/3 x 1, 2230 / 2242); M.2 B KEY, supports connection to 4G / 5G communication modules 6. Storage: On-board Micro SD card slot (for CM5 versions without eMMC) 7. Serial interfaces: 2 x RS485 + 2 x RS232 or 4 x RS485 versions optional; 1 x CAN supports 1Mbps communication rate 8. Digital input/output: 2 x digital outputs + 2 x digital inputs 9. Audio: 3.5mm headphone jack (supports microphone), PH2.0 speaker interface 10. Fan interface: 5V, 4PIN JST-SH PWM fan connector 11. Buzzer: Single-channel controllable buzzer 12. Other: On-board EEPROM and encryption chip 13. Power input: 7V to 36V wide voltage (terminal block), 5V 5A (Type-C) 14. Dimensions: 136.00 x 92.00 x 39.50 mmSpecification: Package Weight One Package Weight 0.78kgs / 1.73lb One Package Size 18cm * 14cm * 6cm / 7.09inch * 5.51inch * 2.36inch Qty per Carton 30 Carton Weight 24.50kgs / 54.01lb Carton Size 38cm * 44cm * 32cm / 14.96inch * 17.32inch * 12.6inch Loading Container 20GP: 498 cartons * 30 pcs = 14940 pcs40HQ: 1157 cartons * 30 pcs = 34710 pcs
£100.99
-
Waveshare Waveshare 7inch Round HDMI Capacitive Touch Display, 1080x1080 LCD, 10-Point Multi-Touch For Raspberry Pi Arduino DIY, 7inch 1080x1080 LCD
1. 7-inch IPS circular display with a hardware resolution of 1080x1080.2. 10-point capacitive touch control, featuring a tempered glass panel with a hardness rating of 6H.3. Utilizes full-lamination touch technology for superior display quality.4. When used with a Raspberry Pi, supports Raspberry Pi OS, Ubuntu, Kali, and RetroPie.5. When used as a computer monitor, supports Windows 11 / 10 / 8.1 / 8 / 7.6. Supports HDMI audio output, featuring onboard 3.5mm headphone and 4-pin speaker jacks.Specifications:1. Viewing Angle: 160-degree2. Resolution: 1080x1080 Pixels3. Overall Dimensions: 230.34 (H) × 230.34 (V) × 6.45 (D) mm4. Display Area: 177.55 (H) × 177.55 (V) mm5. Color Gamut: 65% NTSC6. Max Brightness: 800 cd/m27. Contrast Ratio: 1200:18. Backlight Dimming: Button-controlled9. Refresh Rate: 60Hz10. Display Interface: Standard HDMI port11. Power Interface: 5V Type-C12. Power Consumption: 2WSpecification: Package Weight One Package Weight 0.52kgs / 1.16lb One Package Size 24cm * 24cm * 9cm / 9.45inch * 9.45inch * 3.54inch Qty per Carton 8 Carton Weight 5.30kgs / 11.68lb Carton Size 50cm * 26cm * 38cm / 19.69inch * 10.24inch * 14.96inch Loading Container 20GP: 539 cartons * 8 pcs = 4312 pcs40HQ: 1253 cartons * 8 pcs = 10024 pcs
£162.99
-
Waveshare Waveshare ESP32-P4-WIFI6 4.3inch Development Board, 480 × 800 Resolution, 5-Point Touch, Onboard Audio Codec Chip, Basic Model, With OV5647 Camera
1. This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It is equipped with a 4.3-inch 480 × 800 resolution IPS touch display. It supports rich human-machine interaction interfaces, including MIPI-CSI (with an integrated Image Signal Processor ISP). It also supports USB OTG 2.0 HS for high-speed connectivity and features an onboard 40PIN GPIO expansion interface, compatible with some Raspberry Pi HAT expansion boards, enabling broader application adaptation. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated Key Management Unit, ensuring data and operation security. It is specifically designed for high-performance and high-security applications, fully meeting the higher demands of embedded applications for human-machine interface support, edge computing capabilities, and IO connectivity features.2. Features a high-performance MCU with a RISC-V 32-bit dual-core and single-core processor.3. Onboard ESP32-C6-MINI module, a Wi-Fi 6 coprocessor, expanding the Wi-Fi 6 and BLE5 capabilities of the ESP32-P4.6. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM.7. Powerful image and audio processing capabilities. Image and audio processing interfaces include a JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H264 video encoder.8. The chip package includes stacked 32MB PSRAM, with an external 32MB Nor Flash integrated.9. Utilizes a Type-C interface, improving user convenience and device compatibility.10. Onboard 4.3-inch capacitive touch high-definition IPS screen, 480 × 800 resolution, capable of clearly displaying color images.11. Onboard 3.7V MX1.25 lithium battery charge/discharge interface.12. Exposes I2C, UART, USB, and multiple GPIOs for connecting external devices and debugging, allowing flexible peripheral configuration.13. Onboard Micro SD card slot, providing expanded storage, fast data transfer, and flexibility, suitable for data logging and media playback, simplifying circuit design.14. Onboard camera interface, supporting cameras like the OV5647 (MIPI-CSI).15. Security mechanisms: Secure Boot, Flash Encryption, Hardware Cryptographic Accelerator, and Hardware Random Number Generator. Also supports hardware access protection, enabling Access Permission Management (APM) and privilege separation. LCD Screen Parameters:1. Display Panel: IPS 2. Display Size: 4.3 inches 3. Display Resolution: 480 × 800 pixels 4. Viewing Angle: 160 degrees 5. Display Brightness: 500 cd/m2 6. Contrast Ratio: 1000:1 7. Communication Interface: MIPI-DSI 2-lane 8. Driver IC: ST7701 9. Touch Type: Capacitive Sensing 10. Touch Controller IC: GT911Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 54 Carton Weight 9.20kgs / 20.28lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 54 pcs = 29916 pcs40HQ: 1286 cartons * 54 pcs = 69444 pcs
£34.99 - £44.99
-
Waveshare Waveshare RS485-HUB-8P Industrial-grade Isolated 8-ch RS485 Hub, Rail-mount Support, Wide Baud Rate Range
1. Interface standard: compliant with RS485 standard2. Physical interface: RS485 wiring terminal3. Communication rate: 300-460800bps baud rate (adaptive)4. Support points: each RS485 interface can support up to 32 nodes5. Communication distance: 1200m (9600bps), the higher the communication rate, the shorter the distance6. Working mode: RS485 two-wire (A, B), half-duplex transparent transmission7. Power supply voltage: DC 9-24V8. Transmission medium: ordinary parallel wire/twisted pair9. Size: about 12.1 x 7.2 x 3cmFeatures:1. 8-way RS485 slave port can be extended by one 485 master port with isolation and relay2. RS485 network relay, extension and isolation functions can be realized3. The isolated RS485 interface at the RS485 master port can be connected to RS485 master control devices, and the extended 8-way isolated RS485 interface can be externally connected to various RS485 slave devices, such as RS485 sensors, etc.4. Built-in optoelectronic isolation protection circuit, RS485 master and slave devices are isolated, which can effectively protect RS485 master and slave devices from the damage of ground potential difference between devices, static electricity, surge, which can be applied to industrial environment with high requirements of reliability and safety5. Wide baud rate range, support 300-460800bps wide baud rate communication range (self-adaptive)6. Support 35mm standard rail with rail clips, easy to installSpecification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 15cm * 10cm * 4cm / 5.91inch * 3.94inch * 1.57inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs
£37.99
-
Waveshare Waveshare IMX219-160 160 Degree FOV IMX219 Camera, Applicable for Jetson Nano
Features1. Supports NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Resolution: 3280 × 24645. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.35- Focal Length: 3.15mm- Angle of View (diagonal): 160 degree- Distortion: <14.3%6. 4 screw holes7. Used for attachment8. Provides 3.3V power output9. Dimension: 25mm × 24mm10. Weight: 15gPacking List:1. IMX219-160 Camera x12. 15-pin FFC (opposite sides contact) x1Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 10cm * 5cm * 2cm / 3.94inch * 1.97inch * 0.79inch Qty per Carton 960 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 960 pcs = 265920 pcs40HQ: 644 cartons * 960 pcs = 618240 pcs
£17.99
-
Waveshare Waveshare Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless, 15823
Overview1. This is a universal driver board for e-Paper raw panels, thanks to the dual wireless features - WiFi & Bluetooth - it is easy to display images from PC / smart phone via WiFi or Bluetooth.2. Furthermore, it can also be used for Arduino development, just like any other normal Arduino board.Features1. Onboard ESP32, supports Arduino development2. Provide Android APP, allows to refresh display content via Bluetooth EDR3. Provide HTML host code, allows to refresh display content via remote webpage, suit for Internet applications4. Support Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image5. Support popular image formats: BMP, JPEG, GIF, PNG, etc.6. Easy to be integrated into wireless applications7. Come with e-Paper driver (open source)8. Come with development resources and manualSpecifications1. WiFi protocol: 802.11b/g/n2. Bluetooth protocol: 4.2, includes traditional BR/EDR, and low power BLE3. Interface: 3-wire SPI, 4-wire SPI (default)4. Operating voltage: 5V5. Operating current: 50mA ~ 150mA6. Outline dimension: 29.46mm x 48.25mmPackage Contents1. e-Paper ESP32 Driver Board x12. e-Paper Adapter x13. 24PIN FFC x1Note: e-Paper panels in the photos are NOT included.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 720 pcs = 221760 pcs40HQ: 716 cartons * 720 pcs = 515520 pcs
£11.99
-
Waveshare Waveshare 2.13 inch 212x104 Pixel Three-color E-Ink Display HAT (B) for Raspberry Pi, 13448
Overview1. This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.2. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features1. No backlight, keeps displaying last content for a long time even when power down2. Ultra low power consumption, basically power is only required for refreshing3. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+4. Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.5. Onboard voltage translator, compatible with 3.3V/5V MCUs6. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)Specifications1. Operating voltage: 3.3V/5V2. Interface: 3-wire SPI, 4-wire SPI3. Outline dimension: 65mm x 30.2mm4. Display size: 23.71mm x 48.55mm5. Dot pitch: 0.229 x 0.2286. Resolution: 212 x 1047. Display color: red, black, white8. Grey level: 29. Full refresh time: 15s10. Refresh power: 26.4mW(typ.)11. Standby power: <0.017mW12. Viewing angle: >170 degreePackage Contents1. 2.13 inch e-Paper HAT (B) x12. RPi screws pack (2pcs) x13. PH2.0 20cm 8 Pin x1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 6cm * 2cm / 3.15inch * 2.36inch * 0.79inch Qty per Carton 840 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 36cm * 40cm / 22.05inch * 14.17inch * 15.75inch Loading Container 20GP: 330 cartons * 840 pcs = 277200 pcs40HQ: 767 cartons * 840 pcs = 644280 pcs
£11.99
-
Waveshare Waveshare Micro SD(TF) Storage Board Module, Micro SD
1. Micro SD card slot2. Support SDIO and SPI interfaces3. 2.54mm pitch pinheadersSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs
£2.99
-
Waveshare Waveshare General 1.5 inch 128x128 16-bit High Color RGB OLED Display Module, 14747
1.5 inch RGB OLED display module, 128x128 pixels, 16-bit high color, SPI interfaceOverviewThis is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.Features1. 128x128 high resolution, 65K colors, clearly displays colorful images2. Support 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor3. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Driver: SSD13512. Interface: 4-wire SPI, 3-wire SPI3. Display color: RGB, 65K colors4. Resolution: 128x1285. Viewing angle: >160 degree6. Operating voltage: 3.3V / 5V7. Dimension: 44.5 x 37 (mm)Package Contents1. 1.5 inch RGB OLED Module x12. PH2.0 7Pin x1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs
£14.99
-
Waveshare Waveshare RS485 CAN Shield, RS485 CAN Shield Designed for NUCLEO/XNUCLEO
OverviewThe RS485 CAN Shield will easily enable RS485/CAN communication functions for your NUCLEO/XNUCLEO Arduino boards.Features1. Arduino standard interfaces, compatible with Arduino boards like Arduino UNO, Leonardo, NUCLEO, XNUCLEO- When using with Arduino UNO, Leonardo, the CAN function is unavailable due to hardware limitation2. RS485 function, onboard transceiver SP3485/MAX3485, 3.3V power supply3. CAN function, onboard transceiver SN65HVD230, 3.3V power supplySpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 6cm * 2cm / 2.76inch * 2.36inch * 0.79inch Qty per Carton 960 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 36cm * 40cm / 22.05inch * 14.17inch * 15.75inch Loading Container 20GP: 330 cartons * 960 pcs = 316800 pcs40HQ: 767 cartons * 960 pcs = 736320 pcs
£7.99
-
Waveshare Waveshare RGB Full-color LED Matrix Panel, 2.5mm Pitch, 64x32 Pixels, Adjustable Brightness, 23707, 23707
1. Pixel: 64 x 32=2048 dots2. Pitch: 2.5mm3. Pixel format: 1R1G1B4. Viewing angle: greater than 140 degrees5. Control mode: synchronous6. Drive: 1/16 scan7. Connector: HUB758. Power supply: V / 2.5A (VH4 connector input)9. Power: within 12W10. Size: 16 x 8cmFeatures:1. 2048 independent RGB led, full color display, adjustable brightness2. 64x32 pixels, 2.5mm pitch, allows displaying text, color images or animations 3. 160x80mm size, moderate size, suitable for DIY desktop display or wall mount display4. Two HUB75 headers on board, 1 for controller data input, 1 output, chain support5. Provide open source development resources (for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino, etc.)Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 20cm * 10cm * 2cm / 7.87inch * 3.94inch * 0.79inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs
£16.99
-
Waveshare Waveshare 4-DOF Metal Robot Arm Kit for micro:bit, Support Bluetooth, US Plug
Overview1. Equip your micro:bit with this 4-DOF metal robot arm, and get started to explore the world of artificial intelligent robotic.2. This starter robotic arm kit includes: servo driver board, metal mechanical arm structure, and 4x metal gear servos. When used with the micro:bit, it is easy to control the arm by smart phone through Bluetooth connection.The Servo DriverAdopts Servo Driver for micro:bit:1. Micro:bit edge connector, directly pluggable2. I2C controlled, using only 2 pins3. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)4. Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal5. Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.6. Reserved I2C control pins, allows to work with other control boards7. Comes with development resources and manual (micro:bit graphical examples like Bluetooth/2.4G wir eless remote control)The Robot Arm Structure1. 4-DOF, large solid base, metal mechanical grasper2. Full aluminium alloy body, sandblasting oxidation surface, strong & durable3. Clever mechanical structure and mounting design, agile to control, easy to build3. Fitted with 4x metal gear servos (1x MG996R, 3x MG90S), large torque force, smooth movingPackage IncludeNote: micro:bit is NOT included.1. Metal arm parts x12. MG996R Servo x13. MG90S Servo x34. MG996R servo wheel x15. Servo Driver for micro:bit x16. Power adapter US plug 5V 3A Micro x17. Servo extension wire 150mm x18. Screws pack x19. Screwdrivers 2PCS x1Specification: Package Weight One Package Weight 0.55kgs / 1.21lb One Package Size 25cm * 15cm * 8cm / 9.84inch * 5.91inch * 3.15inch Qty per Carton 20 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 30cm * 40cm / 19.69inch * 11.81inch * 15.75inch Loading Container 20GP: 444 cartons * 20 pcs = 8880 pcs40HQ: 1031 cartons * 20 pcs = 20620 pcs
£42.99
-
WAVESHARE Waveshare Rail-Mount Serial Server RS485 to WIFI/Ethernet Module, Modbus MQTT Gateway, 21968
FeaturesThis is a RS485 device data acquisitor / IoT gateway designed for industrial environment. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to HTTPD Client, etc. With RS485, WIFI and Ethernet ports, the module can realize functions such as serial to WIFI, serial to Ethernet, Ethernet to WIFI and so on. Using screw terminals for power input, it supports 5~36V wide range power supply. Rail-mount V0 flame-retardant case design, small in size, easy to install. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring...SpecificationsOutline: 1. Communication interface: RS485, screw terminal 2. Power supply: 5 ~ 36V DC, screw terminal 3. Case: PC + ABS, V0 flame retardant grade 4. Dimensions: L x W x H: 109.66 x 28 x 64.71 mm Comunication: 1. Ethernet: 10 / 100M auto-negotiation RJ45 connector 2. WIFI: 802.11b/g/n compliant 3. Serial port: RS485 interface (Anti-surge, Lightningproof, Over-current protection) Wireless specification: 1. Frequency Band: 2.412 ~ 2.484 GHz 2. Wireless network: Station / AP / AP+Station Mode 3. Security mechanism: WPA-PSK / WPA2-PSK 4. Encryption type: TKIP / AES 5. Transmitting power: - 802.11b: +19dBm (11Mbps) - 802.11g: +18dBm (54Mbps) - 802.11n: +17dBm (HT20, MCS7); +17dBm (HT40, MCS7) 6. Receiving sensitivity: - 802.11b: -89dBm (11Mbps) - 802.11g: -81dBm (54Mbps) - 802.11n: -73dBm (HT20, MCS7); -71dBm (HT40, MCS7) Serial specification: 1. Baudrate: 300 ~ 460800 bps 2. Parity bit: None, odd, even, mark, space 3. Data bit: 5 ~ 9 bits 4. Flow control: N/A Software 1.Protocol: TCP / UDP / ARP / ICMP / DHCP / DNS / HTTP / MQTT 2. Configuration: Host, web browser, serial AT command 3. Communication method: TCP/IP direct communication, VCOM 4. Operating mode: Transparent transmission, serial command, HTTPD Client, Modbus TCP to Modbus RTU Environmental requirements 1. Working temperature: -40 ~ 85 degree C 2. Storage temperature: -45 ~ 125 degree C 3. Humidity range: 5% ~ 95% relative humidityPackage List1. RS485 TO WIFI/ETH x 1 2. Antenna x 1Specification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15cm * 8cm * 5cm / 5.91inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 17.00kgs / 37.48lb Carton Size 42cm * 50cm * 32cm / 16.54inch * 19.69inch * 12.6inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs40HQ: 921 cartons * 100 pcs = 92100 pcs
£32.99
-
WAVESHARE Waveshare OV9281-120 1MP Mono Camera Module for Raspberry Pi, Global Shutter, OV9281-120 Module
1. 1MP, global shutter, 120 degree FOV, OV9281-120 mono camera, compatible with Raspberry Pi series boards 2. The global shutter eliminates jello-effect while shooting fast moving objects, more suitable for high frame rate capturing 3. Working with Raspberry Pi, direct connect to Raspberry Pi different variants including 4B / 3B+ / 3A+ / 3B / 2B / B+ / A+, extra FPC cable is equired for Zero / Zero 2 W series Specifications: 1. Sensor: OV9281 2. CMOS size: 1/4 inch 3. Camera type: Mono 4. Pixels: 1MP (1280 x 800) 5. Shutter: Global Shutter 6. Aperture: F2.5 7. Distortion: Less than 7.5% 8. Field of vies: 120 degree 9. Focal length: 3.15mm 10. Focusing: Fixed focus Package List: 1. OV9281-120 Camera x 1 2. 15-pin FFC (opposite sides contact) x 1Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs40HQ: 1439 cartons * 200 pcs = 287800 pcs
£23.99
-
WAVESHARE Waveshare Nano Base Board B for Raspberry Pi CM4, Nano Base Board B
1. Suitable for evaluating the Raspberry Pi CM4 Or being integrated into end products 2. Standard CM4 socket, 40PIN GPIO, gigabit ethernet, USB2.0, DSI, CSI, 3.5mm Audio Jack... 3. All in the compact body just as the size of CM4 Specifications: 1. CM4 socket: Suitable for all variants of Compute Module 4 2. Networking: Gigabit Ethernet RJ45 connector 3. Connector: Raspberry Pi 40PIN GPIO header x 1 4. USB: USB 2.0 Type A connector x 1 5. Display: MIPI DSI port x 1 (15pin 1.0mm FPC connector) 6. Camera: MIPI CSI-2 port x 1 (15pin 1.0mm FPC connector) 7. Video: Mini HDMI port x 1, supports 4K 30fps output 8. Audio: 3.5mm jack 9. Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants 10. Power input: 5V 11. Dimension: 56 x 41mm Package list: 1. CM4-NANO-B x 1 3. 2*20PIN color-coded straight pinheader x 1Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 300 pcs = 186000 pcs40HQ: 1439 cartons * 300 pcs = 431700 pcs
£13.99
-
WAVESHARE Waveshare RP2040-Plus Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader, RP2040-Plus with Pinheader
Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now. As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins. What is different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 4MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Lithium battery recharge/discharge header, suitable for mobile devices 6. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 7. Castellated module allows soldering direct to carrier boards 8. USB 1.1 with device and host support 9. Low-power sleep and dormant modes 10. Drag-and-drop programming using mass storage over USB 11. 26 x multi-function GPIO pins 12. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 13. Accurate clock and timer on-chip 14. Temperature sensor 15. Accelerated floating-point libraries on-chip 16. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs40HQ: 763 cartons * 500 pcs = 381500 pcs
£6.99
Sie haben 24 von 424 Produkten gesehen