Puluz
-
PULUZ For DJI RC / RC 2 PULUZ Remote Control Screen Tempered Glass Film, For DJI Mini 3 Pro / Mavic 3 Classic Remote Control
About The Product1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.Package List1. Tempered Glass Film x 1 2. Adhesive x 1 3. Wet & Dry Wipes x 1Specification: General Compatible with DJI: RC 2, RC Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 18cm * 10cm * 1cm / 7.09inch * 3.94inch * 0.39inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 37cm * 22cm / 20.47inch * 14.57inch * 8.66inch Loading Container 20GP: 630 cartons * 200 pcs = 126000 pcs40HQ: 1462 cartons * 200 pcs = 292400 pcs
£0.99
-
PULUZ PULUZ 2.5D 9H Tempered Glass Film for Sony Alpha 7 IV / A7 IV / ILCE-7M4 / A7M4, For Sony Alpha 7 IV
Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to reuse the glass protector once it has been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Descriptions1. Premium tempered glass film is made of specially processed glass which is very effective for protecting the screen from damage. 2. Prevents oil Coating - The glass has an Oil Resistance coating that prevents fingerprints and other contaminants and makes the film easy to clean. 3. 9H High Surface Hardness - The high hardness can effectively protect the screen from scratches and external shocks. 4. Exquisite workmanship. 5. Good adhesion. 6. The product is eco-friendly. 7. It is product that can protect LCD of digital camera well from external impact or dust scar. 8. It can always have preservation status such as new product even if use.Use Method1. LCD panel and surrounding to be attached clearly digital camera with clean cloth. 2. Confirm position of part that wish to attach taking out LCD Panel Guard. 3. Attach on sticking part after remove thin splice vinyl of LCD Panel Guard backside. 4. Establishment is completion if press surrounding firmly once more if attached exactly and remove vinyl of obverse.Package List1. Screen Protector x 1 2. Cleaning Cloth x 1 3. Alcohol Pad x 1 4. Dust-absorber x 1 5. Paper Card Bag x 1Specification: General Certificate GPSR Compatible with Sony: Alpha 7 IV / ILCE-7M4 (A7 IV) Material Tempered Glass Size 71 x 52mm Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 12.5cm * 10.5cm * 1.5cm / 4.92inch * 4.13inch * 0.59inch Qty per Carton 200 Carton Weight 6.50kgs / 14.33lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 200 pcs = 110800 pcs40HQ: 1286 cartons * 200 pcs = 257200 pcs
£0.99
-
PULUZ PULUZ 2.5D 9H Tempered Glass Film for Canon EOS R6, For Canon EOS R6
Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to reuse the glass protector once it has been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Descriptions1. Premium tempered glass film is made of specially processed glass which is very effective for protecting the screen from damage. 2. Prevents oil Coating - The glass has an Oil Resistance coating that prevents fingerprints and other contaminants and makes the film easy to clean. 3. 9H High Surface Hardness - The high hardness can effectively protect the screen from scratches and external shocks. 4. Exquisite workmanship. 5. Good adhesion. 6. The product is eco-friendly. 7. It is product that can protect LCD of digital camera well from external impact or dust scar. 8. It can always have preservation status such as new product even if use.Use Method1. LCD panel and surrounding to be attached clearly digital camera with clean cloth. 2. Confirm position of part that wish to attach taking out LCD Panel Guard. 3. Attach on sticking part after remove thin splice vinyl of LCD Panel Guard backside. 4. Establishment is completion if press surrounding firmly once more if attached exactly and remove vinyl of obverse.Package List1. Screen Protector x 1 2. Cleaning Cloth x 1 3. Alcohol Pad x 1 4. Dust-absorber x 1 5. Paper Card Bag x 1Specification: General Compatible with Canon: EOS R6 Material Tempered Glass Size 71.3 x 53.1mm Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 12.5cm * 10.5cm * 1.5cm / 4.92inch * 4.13inch * 0.59inch Qty per Carton 200 Carton Weight 6.50kgs / 14.33lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 200 pcs = 110800 pcs40HQ: 1286 cartons * 200 pcs = 257200 pcs
£0.99
-
PULUZ PULUZ 2.5D 9H Tempered Glass Film for Canon EOS R5 / EOS R5C, For Canon EOS R5
Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to reuse the glass protector once it has been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Descriptions1. Premium tempered glass film is made of specially processed glass which is very effective for protecting the screen from damage. 2. Prevents oil Coating - The glass has an Oil Resistance coating that prevents fingerprints and other contaminants and makes the film easy to clean. 3. 9H High Surface Hardness - The high hardness can effectively protect the screen from scratches and external shocks. 4. Exquisite workmanship. 5. Good adhesion. 6. The product is eco-friendly. 7. It is product that can protect LCD of digital camera well from external impact or dust scar. 8. It can always have preservation status such as new product even if use.Use Method1. LCD panel and surrounding to be attached clearly digital camera with clean cloth. 2. Confirm position of part that wish to attach taking out LCD Panel Guard. 3. Attach on sticking part after remove thin splice vinyl of LCD Panel Guard backside. 4. Establishment is completion if press surrounding firmly once more if attached exactly and remove vinyl of obverse.Package List1. Screen Protector x 1 2. Cleaning Cloth x 1 3. Alcohol Pad x 1 4. Dust-absorber x 1 5. Paper Card Bag x 1Specification: General Compatible with Canon: EOS R5 Material Tempered Glass Size 74.3 x 56mm Package Weight One Package Weight 0.05kgs / 0.10lb One Package Size 12.5cm * 10.5cm * 1.5cm / 4.92inch * 4.13inch * 0.59inch Qty per Carton 200 Carton Weight 5.00kgs / 11.02lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 200 pcs = 110800 pcs40HQ: 1286 cartons * 200 pcs = 257200 pcs
£0.99
-
PULUZ PULUZ 9H 2.5D HD Tempered Glass Lens Protector + Screen Film for DJI OSMO Pocket 2, For DJI OSMO Pocket 2
Features1. Tempered glass film, high definition and high transmittance. 2. Rub-proof and scratch-proof, effectively protects OSMO Pocket 2. 3. Ultra-thin and high transmittance, nondestructive image quality 4. Accurate size, good match. 5. 1pc lens film + 1pc screen film for DJI OSMO Pocket 2.Package List1. Screen Film x 1 2. Lens Film x 1 3. Dry & Wet Wipes x 1 4. Cleaning Cloth x 1 5. Paper Card Bag x 1Specification: General Compatible with DJI: Pocket 2 Package Include Package Contents Lens Film x 1 Screen Film x 1 Dry & Wet Wipes x 1 Cleaning Cloth x 1 Paper Card Bag x 1 Package Weight One Package Weight 0.02kgs / 0.03lb One Package Size 4cm * 4cm * 0.2cm / 1.57inch * 1.57inch * 0.08inch Qty per Carton 500 Carton Weight 9.50kgs / 20.94lb Carton Size 22cm * 12cm * 12cm / 8.66inch * 4.72inch * 4.72inch Loading Container 20GP: 8417 cartons * 500 pcs = 4208500 pcs40HQ: 19540 cartons * 500 pcs = 9770000 pcs
£0.99
-
PULUZ PULUZ 9H 2.5D HD Tempered Glass Lens Protector + Screen Film for DJI OSMO Pocket Gimbal, For DJI OSMO Pocket
Features1. Tempered glass film, high definition and high transmittance. 2. Rub-proof and scratch-proof, effectively protects OSMO Pocket. 3. Ultra-thin and high transmittance, nondestructive image quality 4. Accurate size, full match. 5. 1pc lens film + 1pc screen film for DJI OSMO Pocket.Package List1. Screen film x 1 2. Lens film x 1 3. Cleaning cloth x 1 4. Dry and wet alcohol wipe pack x 1 5. Packing box x 1Specification: General Compatible with DJI: Osmo Pocket Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 4cm * 4cm * 0.2cm / 1.57inch * 1.57inch * 0.08inch Qty per Carton 500 Carton Weight 5.50kgs / 12.13lb Carton Size 22cm * 12cm * 12cm / 8.66inch * 4.72inch * 4.72inch Loading Container 20GP: 8417 cartons * 500 pcs = 4208500 pcs40HQ: 19540 cartons * 500 pcs = 9770000 pcs
£0.99
-
PULUZ PULUZ 3 in 1 Lens + Front and Back LCD Display 9H 2.5D Tempered Glass Film for DJI Action 2, Lens Screen Film
Features1. Ultra-thin and excellent flexibility. The screen is not thick. You do not need to worry whether the reflexes of your camera would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your camera well and make a big difference on protecting your camera from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the sides of screen film feels smoothly.Package List1. Front screen film x 1 2. Rear screen film x 1 3. Lens film x 1 4. Clean cloth x 1 5. Wet & dry alcohol wipes x 1 6. Dust-absorber x 2Specification: General Compatible with DJI: Action 2 Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 400 pcs = 293600 pcs40HQ: 1705 cartons * 400 pcs = 682000 pcs
£0.99
-
PULUZ PULUZ for GoPro HERO8 Black Lens + LCD Display 9H 2.5D Tempered Glass Film, For GoPro HERO8 Black
Features1. Hard and durable tempered glass surface under special manufacturing process. 2. Scratching protect on the camera. 3. Static technology eliminates the bubble effect and enhance firmly on the camera LCD. 4. High transparency with 99.5% clarity. 5. Strengthens with color chrome on the camera. 6. Suitable for GoPro HERO8 Black action camera. 7. Note: The camera is not included. Package List1. Screen film x 1 2. Lens film x 1 3. Cleaning cloth x 1 4. Dry and wet alcohol wipe pack x 1 5. Packing box x 1Specification: General Compatible with Gopro: HERO8 Black Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 7.5cm * 1cm / 3.94inch * 2.95inch * 0.39inch Qty per Carton 800 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 800 pcs = 587200 pcs40HQ: 1705 cartons * 800 pcs = 1364000 pcs
£0.99
-
PULUZ MagSafe Desktop Live Streaming Magnetic Foldable Phone Holder Bracket, Live Streaming Bracket
1. Strong MagSafe Magnetic Mount: Securely attaches for iPhones with built-in MagSafe or MagSafe-compatible cases. 2. Premium Aluminum Alloy: Made from lightweight yet sturdy aluminum alloy, offering both durability and a premium feel. 3. Stable & Secure Base: V-shaped anti-slip base ensures solid desktop placement without tipping. 4. Foldable & Portable Design: Fully collapsible structure folds flat for easy storage and travel. 5. Multi-Angle Adjustability: Adjustable joints allow you to tilt and raise the phone to your preferred viewing or filming angle. 6. Perfect for Content Creators: Designed for live streaming, filming, video chats, and more. 7. Compatibility with iPhone 12 series and above, or any MagSafe-compatible devices.Specification: General Compatible with Apple: iPhone 16 Pro Max, iPhone 16 Plus, iPhone 16, iPhone 16 Pro, iPhone 15, iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13 Pro Max, iPhone 12 Pro Max, iPhone 12 Pro Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 8cm * 7cm * 3cm / 3.15inch * 2.76inch * 1.18inch Qty per Carton 137 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 32cm * 22cm / 16.54inch * 12.6inch * 8.66inch Loading Container 20GP: 901 cartons * 137 pcs = 123437 pcs40HQ: 2093 cartons * 137 pcs = 286741 pcs
£13.99
-
PULUZ For Sony Sony Cinema Line FX2 / ILME-FX2B PULUZ Metal Camera Cage Stabilizer Rig, For Sony Cinema Line FX2 Cage
1. It is suitable for the metal cage of cameras, the real machine is unobstructed, and the button position is not blocked during use, and the flip screen and battery disassembly and assembly are not blocked. 2. Aviation aluminum alloy material, can quickly switch equipment, rich expansion ports, built-in multiple 1/4 screw holes, 3/8 screw holes, complete interfaces 3. The horizontal and vertical shooting can be switched freely, and the built-in wrench is convenient for disassembly and assembly. 4. The cage design avoids the position of camera button and does not cover the button and battery compartment 5. The cage frame has many holes to connect other accessories, match with external monitors, focus follow, tripods mount, microphones etc to use.Specification: General Compatible with Sony: Cinema Line FX2 (ILME-FX2B) Package Weight One Package Weight 0.27kgs / 0.59lb One Package Size 16cm * 12cm * 7cm / 6.3inch * 4.72inch * 2.76inch Qty per Carton 50 Carton Weight 12.70kgs / 28.00lb Carton Size 50cm * 37cm * 37cm / 19.69inch * 14.57inch * 14.57inch Loading Container 20GP: 389 cartons * 50 pcs = 19450 pcs40HQ: 904 cartons * 50 pcs = 45200 pcs
£26.99
-
PULUZ For Sony ILCE-A7CM2 / Alpha 7C II / Alpha 7CR PULUZ Metal Camera Cage Stabilizer Rig, For Sony ILCE-A7CM2 / Alpha 7CR
1. It is suitable for the metal cage of cameras, the real machine is unobstructed, and the button position is not blocked during use, and the flip screen and battery disassembly and assembly are not blocked. 2. Aviation aluminum alloy material, can quickly switch equipment, rich expansion ports, built-in multiple 1/4 screw holes, 3/8 screw holes, complete interfaces 3. The horizontal and vertical shooting can be switched freely, and the built-in wrench is convenient for disassembly and assembly. 4. The cage design avoids the position of camera button and does not cover the button and battery compartment 5. The cage frame has many holes to connect other accessories, match with external monitors, focus follow, tripods mount, microphones etc to use.Specification: General Compatible with Sony: Alpha 7CR / ILCE-7CR (a7CR), Alpha 7C II / ILCE-A7CM2 (A7C II) Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 16cm * 12cm * 7cm / 6.3inch * 4.72inch * 2.76inch Qty per Carton 50 Carton Weight 12.70kgs / 28.00lb Carton Size 50cm * 37cm * 37cm / 19.69inch * 14.57inch * 14.57inch Loading Container 20GP: 389 cartons * 50 pcs = 19450 pcs40HQ: 904 cartons * 50 pcs = 45200 pcs
£30.99
-
PULUZ Foldable MagSafe Magnet Tripod Desk Phone Mount Handle Bracket, Desk Phone Mount
1. MagSafe Magnetic Design: Strong magnetic attachment for iPhone 12 / 13 / 14 / 15 / 16 series; supports use with bare phone or MagSafe-compatible case. 2. Multi-Form Functionality: Easily transforms into a desktop stand, tripod, handheld grip, or mantis-style clamp for diverse shooting angles. 3. Cold Shoe Extension: Built-in cold shoe mount lets you attach wireless microphones or other accessories. Magnetic back also supports attachable magnetic fill lights. 4. Anti-Slip Base Pads; Equipped with anti-slip rubber pads for enhanced stability on smooth surfaces. 5. Universal Compatibility: Works with other smartphone models using the included magnetic ring adapter for secure magnetic attachment.Specification: General Compatible with Apple: iPhone 16e, iPhone 16 Pro Max, iPhone 16 Plus, iPhone 16, iPhone 16 Pro, iPhone 15, iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 14 Plus, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 13cm * 7cm * 2cm / 5.12inch * 2.76inch * 0.79inch Qty per Carton 120 Carton Weight 9.50kgs / 20.94lb Carton Size 42cm * 32cm * 22cm / 16.54inch * 12.6inch * 8.66inch Loading Container 20GP: 901 cartons * 120 pcs = 108120 pcs40HQ: 2093 cartons * 120 pcs = 251160 pcs
£11.99
-
PULUZ Foldable MagSafe Magnet Cold Shoe On-Camera Phone Mount, Cold Shoe Mount
1. Fast Mount & Release: Built-in N52 magnets allow for secure, fast attachment and removal of MagSafe-compatible devices. 2. Compact & Portable: Foldable design keeps it slim and easy to carry, perfect for travel or run-and-gun shooting. 3. Cold Shoe & 1/4 Thread: Equipped with a bottom cold shoe mount and a standard 1/4 threaded hole for seamless integration with tripods, cages, or other accessories. 4. Flexible Adjustment: Fully adjustable angles and positioning help you adapt quickly to different shooting scenarios. 5. Wide Compatibility: Ideal for camera monitoring, multi-angle shooting setups, or tripod-based recording, no matter your gear configuration.Specification: General Compatible with Apple: iPhone 16e, iPhone 16 Pro Max, iPhone 16 Plus, iPhone 16, iPhone 16 Pro, iPhone 15, iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 14 Plus, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 8cm * 3cm / 2.76inch * 3.15inch * 1.18inch Qty per Carton 135 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 32cm * 22cm / 16.54inch * 12.6inch * 8.66inch Loading Container 20GP: 901 cartons * 135 pcs = 121635 pcs40HQ: 2093 cartons * 135 pcs = 282555 pcs
£6.99
-
PULUZ For DJI RC Pro PULUZ Remote Control Screen Tempered Glass Film, For DJI RC Pro
About The Product1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.Package List1. Tempered Glass Film x 1 2. Adhesive x 1 3. Wet & Dry Wipes x 1Specification: General Certificate GPSR Compatible with DJI: RC Pro Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 18cm * 10cm * 1cm / 7.09inch * 3.94inch * 0.39inch Qty per Carton 200 Carton Weight 5.80kgs / 12.79lb Carton Size 52cm * 37cm * 22cm / 20.47inch * 14.57inch * 8.66inch Loading Container 20GP: 630 cartons * 200 pcs = 126000 pcs40HQ: 1462 cartons * 200 pcs = 292400 pcs
£0.99
-
PULUZ 50cm Photo Studio Light Box, PU5050BA, PU5050RD, PU5050A, PU5050BEU, PU5050BUK
Features 1. Photo light box: 50 x 50cm 3 color (white light, soft light, warm light) 10-level (1 percent - 100 percent) adjustable studio photo light box, the brightness is times of ordinary light boxes, no strobe and flashing. Apply to professional photographer to take high quality photos. The light diffuser given away makes photos softer. 2. Professional light: Built-in 160 LED 25lm 2835 lamp beads, CRI greater than or equal 90, 3200-6500k color temperature to meet all your needs for photos in different situations. Professional particulate silver film reflective fabric inside diffuses light evenly and avoid vignette. 3. Portable and foldable: Still troubled by the huge photographic equipment? Our photography light box solves all your problems. Handle design can easily set up and carry, installation can be completed within seconds without extra tools. It is foldable, you can carry it anywhere. 4. Multi-angle photography:The light tent allows flexible shooting angle, you can choose any angle for shooting (Front full window, top window). 5. Power supply: USB-C interface, can be connected to a wall plug, power bank or computer, support quick charge 6. Soft light cloth: With a soft light cloth, suitable for products with the props of highly reflecting light and easily showing the contours 7. Multi-color backdrops: With 6 removable different color backdrops paper. Specifications 1. Main material: Oxford cloth, aluminum film, PVC, ABS, PE 2. Number of lamp beads: 160pcs 3. Lamp bead model: 2835 4. Lamp bead brightness: 25lm 5. Dimming range: 3200k-6500k 6. Dimming gear: 10 modes 7. CRI: Greater than or equal 90 8. Interface Type-C 9. Voltage: Support PD, QC, FPC, AFC fast charge adaptive 9V 10. Power consumption: 1.8-20W 11. Ring light board size: 30cm 12. Shed size: 50cm Package List 1. Photo studio (a ring light board) x 1 2. Carry bag x 1 3. Black PVC background board x 1 4. White PVC background board x 1 5. Orange PVC background board x 1 6. Red PVC background board x 1 7. Blue PVC background board x 1 8. Green PVC background board x 1 9. Diffuser Soft cloth with holes x 1 10. Packing box x 1 Specification: General Certificate EMC, LVD Package Weight One Package Weight 4.18kgs / 9.22lb One Package Size 52cm * 52cm * 8cm / 20.47inch * 20.47inch * 3.15inch Qty per Carton 4 Carton Weight 17.50kgs / 38.58lb Carton Size 55cm * 26cm * 55cm / 21.65inch * 10.24inch * 21.65inch Loading Container 20GP: 339 cartons * 4 pcs = 1356 pcs40HQ: 787 cartons * 4 pcs = 3148 pcs
£22.99
-
PULUZ PULUZ 2.5D 9H Tempered Glass Film for Nikon D5300, Compatible with Nikon D5300 / D5500 / D5600, Pentax K-1 / K-1 Mark II, For Nikon D5300
Descriptions1. Premium tempered glass film is made of specially processed glass which is very effective for protecting the screen from damage. 2. Prevents oil Coating - The glass has an Oil Resistance coating that prevents fingerprints and other contaminants and makes the film easy to clean. 3. 9H High Surface Hardness - The high hardness can effectively protect the screen from scratches and external shocks. 4. Exquisite workmanship. 5. Good adhesion. 6. The product is eco-friendly. 7. It is product that can protect LCD of digital camera from external impact or dust scar. 8. It can always have preservation status such as new product even if use.Use Method1. LCD panel and surrounding to be attached clearly digital camera with clean cloth. 2. Confirm position of part that wish to attach taking out LCD Panel Guard. 3. Attach on sticking part after remove thin splice vinyl of LCD Panel Guard backside. 4. Establishment is completion if press surrounding firmly once more if attached exactly and remove vinyl of obverse.Cautions1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to reuse the glass protector once it has been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Package List1. Screen Protector x 1 2. Cleaning Cloth x 1 3. Alcohol Pad x 1 4. Dust-absorber x 1 5. Paper Card Bag x 1Specification: General Compatible with Nikon: D5600, D5500, D5300 Material Tempered Glass Thickness 0.3mm Package Include Package Contents Screen Protector x 1 Cleaning cloth x 1 Dust-absorber x 1 Alcohol Pad x 1 Paper Card Bag x 1 Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 15cm * 9cm * 1.2cm / 5.91inch * 3.54inch * 0.47inch Qty per Carton 200 Carton Weight 7.40kgs / 16.31lb Carton Size 48cm * 32cm * 32cm / 18.9inch * 12.6inch * 12.6inch Loading Container 20GP: 542 cartons * 200 pcs = 108400 pcs40HQ: 1259 cartons * 200 pcs = 251800 pcs
£0.99
-
PULUZ Compatible with Canon SX700 / IXUS230 / SX600 / SX610 / SX620 / SX720 / SX710 / IXUS230 / G15 / G16, Sony WX350 / WX300, Panasonic SZ9 / SZ7, Fujifilm Q1 / Q2 / XF1, For Canon SX700
Descriptions1. Premium tempered glass film is made of specially processed glass which is very effective for protecting the screen from damage. 2. Prevents oil Coating - The glass has an Oil Resistance coating that prevents fingerprints and other contaminants and makes the film easy to clean. 3. 9H High Surface Hardness - The high hardness can effectively protect the screen from scratches and external shocks. 4. Exquisite workmanship. 5. Good adhesion. 6. The product is eco-friendly. 7. It is product that can protect good LCD of digital camera from external impact or dust scar. 8. It can always have preservation status such as new product even if use. 9. Suitabe for Canon SX600 / SX610 / SX620 / SX700 / SX710/ SX720 / G15 / G16 / IXUS230, Sony WX350 / WX300, Panasonic Z9/SZ7, FUJI Q1 / Q2 / XF1.Use Method1. LCD panel and surrounding to be attached clearly digital camera with clean cloth. 2. Confirm position of part that wish to attach taking out LCD Panel Guard. 3. Attach on sticking part after remove thin splice vinyl of LCD Panel Guard backside. 4. Establishment is completion if press surrounding firmly once more if attached exactly and remove vinyl of obverse.Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it has been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Package List1. Screen Protector x 1 2. Cleaning Cloth x 1 3. Alcohol Pad x 1 4. Dust-absorber x 1 5. Paper Card Bag x 1Specification: General Compatible with Canon: SX700 HS, IXUS 230 HS Material Tempered Glass Thickness 0.3mm Package Include Package Contents Screen Protector x 1 Cleaning cloth x 1 Dust-absorber x 1 Alcohol Pad x 1 Paper Card Bag x 1 Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 13.3cm * 8.7cm * 1.2cm / 5.24inch * 3.43inch * 0.47inch Qty per Carton 200 Carton Weight 6.50kgs / 14.33lb Carton Size 48cm * 32cm * 32cm / 18.9inch * 12.6inch * 12.6inch Loading Container 20GP: 542 cartons * 200 pcs = 108400 pcs40HQ: 1259 cartons * 200 pcs = 251800 pcs
£0.99
-
PULUZ For Canon EOS R50 V PULUZ Live Streaming Camera Cage Expansion Mount Frame, For Canon EOS R50 V
1. Adopts aluminum alloy material with smooth surface for solidity, wear resistant and strong antioxidant, suitable for daily use. 2. Multiple 1/4in and 3/8in screw holes can be used with different devices, and equipped with cold shoe for flash and microphones, easy and quickly to install. 3. The camera cage does not obscure the opening of the battery bin, nor the opening of the flip screen, and with humanized design of a non slip pad and protect the bottom of the camera. 4. The multi screw holes of the camera full cage can achieve the fast switching among tripod shooting, handheld shooting, pan tilt shooting, using a variety of ways. 5. The camera full body cage has a lightweight design, will not cause additional burden and reduce the unneccessary fatigue.Specification: General Compatible with Canon: EOS R50 V Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 17cm * 12cm * 7cm / 6.69inch * 4.72inch * 2.76inch Qty per Carton 50 Carton Weight 10.50kgs / 23.15lb Carton Size 62cm * 35cm * 37cm / 24.41inch * 13.78inch * 14.57inch Loading Container 20GP: 332 cartons * 50 pcs = 16600 pcs40HQ: 771 cartons * 50 pcs = 38550 pcs
£27.99
-
PULUZ For Canon EOS R6 III PULUZ Live Streaming Camera Cage Expansion Mount Frame, For Canon EOS R6 III
1. CNC machining aluminum, anodized surface, strong and durable 2. The cage frame has many holes to connect other accessories 3. The cage corner is circle, ergonomic design, comfortable grip 4. The cage design avoids the position of camera button and does not cover the button and battery compartment 5. There are several 1/4 and 3/8 threaded holes in each direction of the product to facilitate the expansion of other photographic equipment 6. Suitable for Canon EOS R6 III cameraSpecification: General Compatible with Canon: EOS R6 Mark III Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 17cm * 12cm * 7cm / 6.69inch * 4.72inch * 2.76inch Qty per Carton 50 Carton Weight 10.50kgs / 23.15lb Carton Size 62cm * 35cm * 37cm / 24.41inch * 13.78inch * 14.57inch Loading Container 20GP: 332 cartons * 50 pcs = 16600 pcs40HQ: 771 cartons * 50 pcs = 38550 pcs
£27.99
-
PULUZ PULUZ 1.65m Height Tripod Mount Holder for Vlogging Video Light Live Broadcast Kits, 1.65m Tripod
1. Made of high quality aluminum leg tube, durable and rugged. 2. Compact the tripod legs can be folded, making it small enough to carry just about anywhere. 3. Adjust the height of the tripod by adjusting the center axis to meet different shooting concepts. 4. Suitable for mobile phones, tablets, sports cameras, DV cameras, card machines or micro-singles. 5. Lightweight and portable design: Convenient to use for traveling or working outdoor etc. 6. Adjustable max height: 165cm, all height: 170cm, fold height: 37cm. 7. Weight: 489g.Specification: General Compatible with DJI: Osmo Action 3, Action 2, Osmo Action Gopro: HERO11 Black Mini, HERO11 Black, HERO10 Black, HERO9 Black, HERO8 Black, MAX, HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, HERO6 Black, HERO5 Black, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO Insta360: X3, ONE RS 1-Inch 360 Edition, Insta360 ONE RS 4K Edition, Insta360 ONE RS 1-INCH EDITION, Insta360 ONE RS 360 Edition, ONE X2, EVO, ONE X, ONE Canon: EOS R6 V, EOS R50 V, EOS R6 Mark III, EOS C50, EOS R100, PowerShot V1, EOS R5 Mark II, EOS R8, EOS R50, EOS R6 Mark II, PowerShot SX740 HS, EOS 1500D, EOS 1D X Mark Ⅱ, IXUS 285 HS, IXUS 275 HS, IXUS 155, IXUS 265 HS, IXUS 132, PowerShot A3100, EOS 5D Nikon: ZR, Z 5II, Z50 II, Z 6III, Z 8, Coolpix P1000, Coolpix A10, Coolpix A100, D4S, Coolpix S3500, Coolpix S2700, Coolpix S2600, Coolpix L25, Coolpix S3300, Coolpix S3200, D4, Coolpix L110, Coolpix S220, D300S, D3x, D3 OLYMPUS: VG-165, VG-160, D-745, VG-130, U7050, VG-120 Panasonic: LUMIX ZS99 / TZ99, LUMIX S9, Lumix DC-S5 IIX, LUMIX DC-S5 II, Lumix DMC-F5, Lumix DMC-ZS9, Lumix DMC-TZ18 FUJIFILM: instax mini 13, instax mini LiPlay+, X-E5, X Half (X-HF1), instax WIDE Evo, X-M5, X-S20, GFX100S II, instax Mini 99, GFX 100II, instax mini 12, X-T5, FinePix JZ500, FinePix JZ505, FinePix JZ305, FinePix JZ300, FinePix JZ200, FinePix JZ100, FinePix JZ110 Sony: Alpha 7R VI / ILCE-7RM6 (A7R VI), Alpha 7 V / ILCE-7M5 (A7 V), Cinema Line FX2 (ILME-FX2B), ZV-E10 II (ZV-E10M2), Alpha 9 III / ILCE-9M3 (A9 III), Alpha 7CR / ILCE-7CR (a7CR), Alpha 7C II / ILCE-A7CM2 (A7C II), Alpha 6700 / ILCE-6700 (A6700), ZV-E1, Alpha 7R V / ILCE-7RM5 (A7R V), ZV-1F, Alpha 6100 / ILCE-6100 (A6100), Cyber-shot RX100 VI/ DSC-RX100M6 (RX100 VI), Alpha 7 III / ILCE-7M3 (A7 III), DSC-W800, DSC-W810, DSC-W710, DSC-WX150, DSC-HX7, DSC-W210, DSC-W320, Cyber-shot DSC-S950 Samsung: PL120 Kodak: EKTAR H35, Pixpro FZ55, EasyShare Z1275 Leica: Q3, X Vario (Typ 107) Package Weight One Package Weight 0.49kgs / 1.07lb One Package Size 42cm * 8cm * 8cm / 16.54inch * 3.15inch * 3.15inch Qty per Carton 20 Carton Weight 13.10kgs / 28.88lb Carton Size 44cm * 42cm * 42cm / 17.32inch * 16.54inch * 16.54inch Loading Container 20GP: 343 cartons * 20 pcs = 6860 pcs40HQ: 797 cartons * 20 pcs = 15940 pcs
£3.99
-
PULUZ PULUZ Triple Ball Clamp Close Hole Diving Camera Bracket CNC Aluminum Spring Flashlight Clamp for Diving Underwater Photography System, Triple Ball Close Hole(Black), Triple Ball Close Hole(Red
1. Made of hard coat anodizing aluminium, durable to use. 2. Range triple ball clamp, allows flexibility with arm positioning. 3. Use a triple ball clamp to connect three ball adapters or arms, attach two accessories to a camera 4. Strong, lightweight, waterproof aluminum construction. 5. Thicker plates provide good combination of strength and range of motion. Plates are spring-loaded for easy assembly and breakdown of your arm system. A hard anodized aluminum wing nut allows for easy one-handed operation and will withstand years of use.Specification: General Compatible with DJI: Osmo Action Gopro: HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, HERO6 Black, HERO5 Black, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO Material Aluminum Size 55*55*62mm Weight 65g Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 8cm * 6.5cm * 6cm / 3.15inch * 2.56inch * 2.36inch Qty per Carton 160 Carton Weight 15.00kgs / 33.07lb Carton Size 52cm * 35cm * 34cm / 20.47inch * 13.78inch * 13.39inch Loading Container 20GP: 430 cartons * 160 pcs = 68800 pcs40HQ: 1000 cartons * 160 pcs = 160000 pcs
£5.99
-
PULUZ PULUZ 40 LEDs 40m Diving Waterproof Fill Light Camera Video Photo Studio Light, 40 LEDs
Features1. The main material is plastic PC material, which is tough, durable and corrosion-resistant 2. Small and lightweight design, easy to carry and use without burden 3. It can be used as a fill light for indoor and outdoor Vlogging; It can also be used as a fill light for diving shooting. It has passed the IPX8 test and is waterproof up to 40 meters 4. Magnetic charging design, automatically identify positive and negative when charging is connected 5. With a 1/4 screw hole and a cold shoe base under bottom, which can be connected to a tripod, a selfie stick or a camera cold shoe base, and there is another cold shoe base on the top, which can be extended to connect to a microphone, fill light, etc. 6. With 8-color replaceable filters, various light colors can be adjusted freely according to needsSpecifications1. Material: PC, tempered glass 2. Waterproof level: IPX8 (waterproof to a depth of 40 meters) 3. Number of LED lamp beads: 40PCS 4. Power: 5V/2A 5. Color temperature: 6000-6500K 6. Lumens: 650-750LM 7. Built-in lithium battery: 2500mAh 8. Full charge time: 2.5H 9. Use time: 2H-6H 10. Modes: 3 gear brightness adjustment + SOS signalPackage List1. Waterproof light x 1 2. 8-color filter (pink purple blue white red green orange yellow) x 1 3. Magnetic charging cable x 1Specification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 17.30kgs / 38.14lb Carton Size 43cm * 42cm * 27cm / 16.93inch * 16.54inch * 10.63inch Loading Container 20GP: 546 cartons * 100 pcs = 54600 pcs40HQ: 1269 cartons * 100 pcs = 126900 pcs
£15.99
-
PULUZ PULUZ Triangle Style SLR Camera Bag Sling Waterproof Backpack Shoulder Messenger Bags with Removable Lens Bag, Triangle Style Backpack(Black)
1. Large capacity size: Fits for 1 camera, 1 lens, 1 tripod + other accessories. 2. Made of high density nylon fabric, tough and durable. 3. Bilateral theft buckles design, good protect your camera. 4. The back that is made of breathable shockproof mat which also can be used as a portable conceal pocket. 5. The comfortable, shockproof and reduce pressure shoulder strap, can be adjusted by your size. 6. Zipper pocket on the front used for battery, SD card, creditcard and others. 7. Separate detachable lens bag, unique design, easy to carry.Specification: Package Weight One Package Weight 0.92kgs / 2.02lb One Package Size 31cm * 22cm * 18cm / 12.2inch * 8.66inch * 7.09inch Qty per Carton 6 Carton Weight 6.40kgs / 14.11lb Carton Size 60cm * 36cm * 36cm / 23.62inch * 14.17inch * 14.17inch Loading Container 20GP: 342 cartons * 6 pcs = 2052 pcs40HQ: 796 cartons * 6 pcs = 4776 pcs
£10.99
-
PULUZ For DJI Osmo Pocket 4P PULUZ 50m Underwater Waterproof Housing Diving Cover, For DJI Osmo Pocket 4P
1. 50-meter deep-diving waterproof protection for worry-free underwater shooting: Designed specifically for underwater shooting with Pocket 4P, it supports waterproof use at depths of approximately 50 meters, suitable for diving, snorkeling, surfing, rafting, water parks, island travel, and other environments. It helps protect the camera from currents, waves, and wet environments, making underwater shooting safer. 2. High-transparency PC lens hood to reduce image quality loss: Utilizing a high-transparency PC lens hood, it maintains excellent light transmission, helping to reduce blur, graying, and image distortion during underwater shooting. Ideal for shooting corals, schools of fish, selfies, travel vlogs, and water sports footage, resulting in clearer and more natural images. 3. Full-coverage body protection for waterproof, scratch-resistant, and shockproof performance: The full-coverage protective structure covers key areas of the camera body, helping to resist splashes, sand, gravel, scratches, and minor everyday impacts. Whether at the beach, pool, snow, or on outdoor travel, it provides stable protection for Pocket 4P. 4. Precision Buttons and Secure Locking for Easier Underwater Operation: The external button design facilitates basic operations after the camera is installed in the waterproof case. The buttons offer clear feedback, minimizing operational obstacles. The secure locking and sealing structure enhance closure stability, making it suitable for handheld shooting, extension pole shooting, and sports tracking. 5. Complete Accessories, Including a Lens Silicone Protective Cover: The package includes a waterproof case, a movable base, a 1/4-inch screw adapter, a long screw, and a lens silicone protective cover. The movable base and adapter are compatible with grips, tripods, selfie sticks, and other accessories; the lens silicone protective cover provides dust and scratch protection, making it ideal for travel storage.Specification: General Compatible with DJI: Osmo Pocket 4P Package Weight One Package Weight 0.28kgs / 0.61lb One Package Size 22cm * 10cm * 8cm / 8.66inch * 3.94inch * 3.15inch Qty per Carton 40 Carton Weight 11.45kgs / 25.24lb Carton Size 55cm * 47cm * 32cm / 21.65inch * 18.5inch * 12.6inch Loading Container 20GP: 322 cartons * 40 pcs = 12880 pcs40HQ: 748 cartons * 40 pcs = 29920 pcs
£15.99
You have seen 96 out of 889 products