Generic or Third Party Components For DJI & GoPro Accessories
-
DJI Original Hot Shoe Adapter Plate for DJI Mic, Hot Shoe Adapter Plate
1. Mounts the receiver to the camera hot/cold shoe port2. When not in use, it can be stored in the charging case3. Adaptable product: for DJI Mic4. Packing list: adapter board x 15. Weight: about 2gSpecification: Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 500 Carton Weight 24.50kgs / 54.01lb Carton Size 30cm * 50cm * 56cm / 11.81inch * 19.69inch * 22.05inch Loading Container 20GP: 317 cartons * 500 pcs = 158500 pcs40HQ: 736 cartons * 500 pcs = 368000 pcs
£8.99
-
BRDRC For DJI Mavic Air 2 / Air 2S Air-Dropping System Thrower Parabolic, For DJI Mavic Air 2 / Air 2S
1. Applicable to Air 2S/ Air 2 drones; 2. Can be delivered remotely, used for advertising, throwing bait, throwing gifts, delivering meals, sending wedding rings, etc.; 3. Lightweight and safe, it will not increase the burden on the drone or damage the drone, and is easy to install and disassemble; 4. The bottom is equipped with a tripod, which does not affect the propeller and sensor. 5. The front landing gear is increased by 31mm, and the rear landing gear is increased by 28mm, which can prevent the ground debris from dirtying the fuselage or damaging the gimbal during takeoff and landing, and it can still take off and land on uneven ground. 6. Main material: ABS 7. Net weight: 62.9g 8. Size: 9.2 x 8 x 2.8cm (thrower), 6.1 x 2.1 x 1.2cm (rear landing gear), 5 x 1.7 x 1.5cm (front landing gear) Packing list: 1. Thrower x 1 2. Heightening bracket (set) x 1 3. Lifting ring x 1 4. Foot pad x 1Specification: General Compatible with DJI: Air 2S, Mavic Air 2 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 12cm * 10cm * 7cm / 4.72inch * 3.94inch * 2.76inch Qty per Carton 100 Carton Weight 14.00kgs / 30.86lb Carton Size 52cm * 35cm * 25cm / 20.47inch * 13.78inch * 9.84inch Loading Container 20GP: 586 cartons * 100 pcs = 58600 pcs40HQ: 1360 cartons * 100 pcs = 136000 pcs
£17.99
-
STARTRC For DJI Mini 4 Pro STARTRC Night Navigation Searchlight LED Flashlight Rechargeable Refill Lighting Signal Light, For DJI Mini 4 Pro
1. Exclusive design. Designed for DJI Mini 4 pro, the drone searchlight has independent and detachable lights on both sides, which can be used for drone night flight, will not interfere with signals, and will not affect flight use; 2. High-quality materials. Made of ABS material, it is smooth and burr-free, sturdy and durable, and weighs only about 52g overall. The assembly will not affect the flight of the aircraft to a certain extent. The silicone gasket on the fuselage prevents mutual friction and effectively reduces shock; 3. Three modes. Three adjustment modes, you can adjust them at will tomorrow night, and the third one is SOS mode, which can cope with outdoor emergency measures. The USB charging port can be charged at any time. It can last for two hours when fully charged, which can basically meet the needs of night flight; 4. Multi-angle adjustment. The lights on both sides can rotate 360 a??a??degrees, and the rotation of the two sides does not interfere with each other. They can be illuminated according to needs, and the angle can be adjusted at will and can be fixed, and adjusted according to needs; 5. Easy to use. The single-sided snap-on switch fits the Mini 4 pro design at the bottom, which is very fixed, quick to install and disassemble, will not shake, and is not easy to fall, protecting your night drone flight;Specification: General Compatible with DJI: Mini 4 Pro Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 18cm * 10cm * 3cm / 7.09inch * 3.94inch * 1.18inch Qty per Carton 100 Carton Weight 11.80kgs / 26.01lb Carton Size 52cm * 32cm * 20cm / 20.47inch * 12.6inch * 7.87inch Loading Container 20GP: 801 cartons * 100 pcs = 80100 pcs40HQ: 1860 cartons * 100 pcs = 186000 pcs
£17.99
-
PULUZ PULUZ Max Lens Mod Wide Angle Lens for GoPro Hero13 Black / Hero12 Black / Hero11 Black / HERO10 Black / HERO9 Black, For GoPro Hero13 Black / Hero12 Black
1. Max HyperSmooth enhanced anti-shake can achieve up to 2.7K 60 frame video stability. 2. The ultra-wide 155 degree FOV can enhance the viewing angle and improve the depth of field. 3. Horizontal locking can ensure that your video remains horizontal or vertical even when the camera is fixed off the center position or rotated 360 degrees. 4. Max TimeWarp motion delay can present enhanced and smooth TimeWarp motion delay video. 5. After being installed on HERO10 Black / HERO9 BLACK, it can support 5 meters waterproof. 6. Easy to install and disassemble, no tools are needed. Note: The MAX lens is equipped with components that have waterproof performance, but underwater use may cause image distortion. It is recommended not to use it underwater.Specification: General Certificate GPSR Compatible with Gopro: HERO13 Black, HERO12 Black, HERO11 Black, HERO10 Black, HERO9 Black Package Weight One Package Weight 0.11kgs / 0.23lb One Package Size 17cm * 16cm * 6cm / 6.69inch * 6.3inch * 2.36inch Qty per Carton 100 Carton Weight 12.00kgs / 26.46lb Carton Size 52cm * 33cm * 32cm / 20.47inch * 12.99inch * 12.6inch Loading Container 20GP: 485 cartons * 100 pcs = 48500 pcs40HQ: 1127 cartons * 100 pcs = 112700 pcs
£21.99
-
For DJI Mavic 3 Classic Drone Storage Box Portable Explosion-proof Case, Explosion-proof Case
1.Anti-compression and wear resistance, good waterproof, fit the fuselage2. Large-capacity partition storage, can hold the aircraft / propeller / battery / remote control / charger, etc.3. Inner pearl cotton + EVA, good shock absorption, hold everything in place to prevent scratches, collisions and drops.4. Compatible models: for DJI Mavic 3 Classic 5. Material: PP + EVA + pearl cotton6. Weight: 1665g7. Size: 40 x 34 x 14cmSpecification: Package Weight One Package Weight 2.00kgs / 4.42lb One Package Size 45cm * 36cm * 16cm / 17.72inch * 14.17inch * 6.3inch Qty per Carton 16 Carton Weight 32.00kgs / 70.55lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 16 pcs = 2832 pcs40HQ: 412 cartons * 16 pcs = 6592 pcs
£18.99
-
PULUZ For DJI Osmo 360 PULUZ Optical Tempered Glass Cover Protective Lens Guard
1. Premium 10H Tempered Glass: Made of optical tempered glass with 10H hardness, highly scratch-resistant, more durable than plastic lens protectors, and delivers superior light transmission. 2. Full Protection Design: Waterproof, oil-resistant, dustproof, and shockproof, effectively prevents scratches and accidental impacts to keep your action camera lens safe. 3. Ultra-High Light Transmittance: Lens material offers up to 99% transparency; AR coating increases transmission to over 98% for clearer, sharper image quality. 4. Hydrophobic Coating: Special water-repellent layer with a 115?° drop angle ensures no water stains remain on the lens, maintaining shooting clarity in wet conditions. 5. Easy Snap-On Installation: Designed with a secure buckle system, making installation and removal quick, simple, and hassle-free.Specification: General Compatible with DJI: Osmo 360 Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 12cm * 8cm * 2.5cm / 4.72inch * 3.15inch * 0.98inch Qty per Carton 300 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 45cm * 40cm / 19.69inch * 17.72inch * 15.75inch Loading Container 20GP: 296 cartons * 300 pcs = 88800 pcs40HQ: 687 cartons * 300 pcs = 206100 pcs
£11.99
-
Sunnylife For DJI Avata 2 Sunnylife Drone Anti-Collision Protective Cover, Back Plate, Propeller Ring Stripes, Combo Case Kit
AT2-KC820Features:1. Anti-collision & Anti-damage. The anti-collision TPU stripes Increasing tenacity and make your drone safer.2. Lightweight Design. The protective rings weight only 28g, hardly affects flying endurance.3. Especially Designed for Avata 2. The propellers protectors perfectly fit for Avata 2 and durable to use.Specifications:1. Name: Sunnylife Propeller Guard Protector2. Model: AT2-KC8203. Applicable Models: Dor DJI AVATA 24. Material: TPU5. Net Weight: 28gAT2-P821Features:1. Anti-scratch under Turtle Mode. The protective plate prevents Avata 2 from scratch and bumps under turtle mode.2. Bump-proof Hard Material. The protective plate can effectively relieve shock force and protect drone.3. Sturdy & Lightweight. The protector is only 10g, which will not increase much burden on drone.4. Locked by Screws & Stable Installation.Specifications:1. Name: Sunnylife Protective Plate2. Applicable Models: Avata 23. Model: AT2-P8214. Material: PlasticSpecification: General Compatible with DJI: Avata 2 Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 11cm * 1cm / 5.91inch * 4.33inch * 0.39inch Qty per Carton 200 Carton Weight 6.00kgs / 13.23lb Carton Size 45cm * 22cm * 32cm / 17.72inch * 8.66inch * 12.6inch Loading Container 20GP: 841 cartons * 200 pcs = 168200 pcs40HQ: 1954 cartons * 200 pcs = 390800 pcs
£3.99 - £9.99
-
PULUZ For DJI Osmo Action 6 PULUZ High Density Foam Windshield, For DJI Osmo Action 6
1. Specially designed for DJI Osmo Action 6, made of high-density eco-friendly foam with strong elasticity, resistant to deformation. 2. Effectively reduces wind noise during high-speed recording or in windy environments. 3. Protects the camera body from scratches, fingerprints, dust, and dirt. 4. Precision cutouts allow easy access to all function ports, buttons, and the lens. 5. Lightweight, durable, washable, with excellent protection and a snug fit. Warm Note: The camera shown in images is for demonstration purposes only and is not included.Specification: General Compatible with DJI: Osmo Action 6 Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 9cm * 5cm * 7cm / 3.54inch * 1.97inch * 2.76inch Qty per Carton 160 Carton Weight 3.20kgs / 7.05lb Carton Size 43cm * 34cm * 45cm / 16.93inch * 13.39inch * 17.72inch Loading Container 20GP: 405 cartons * 160 pcs = 64800 pcs40HQ: 940 cartons * 160 pcs = 150400 pcs
£1.99
-
DJI For DJI Mini 5 Pro Original Quick-Release 360-Degree Propeller Guard (With Integrated Propellers)
1. The propeller guards feature a snap-on design for quick installation on the aircraft arms. After removal, they magnetically attach for easy storage and transport. 2. Lightweight yet protective, they help prevent injuries and propeller damage, making flights safer and especially suitable for beginners flying indoors or around obstacles.3. Weight (one side): 16 g4. Radius: 65 mm5. Dimensions (after installation): 357×280×90 mm (L×W×H)Tips:1. Before installing the propeller guard on Mini 5 Pro, ensure that the aircraft firmware has been updated to v01.00.0400 or later. Otherwise, flight stability cannot be guaranteed.2. The aircraft will weigh more than 250 g after installing the propeller guard. Always carefully check and abide by local laws and regulations. If required, obtain the necessary approval and clearance from the related government agencies before flying.Specification: General Compatible with DJI: Mini 5 Pro Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 18cm * 14cm * 7cm / 7.09inch * 5.51inch * 2.76inch Qty per Carton 80 Carton Weight 11.10kgs / 24.47lb Carton Size 66cm * 54cm * 37cm / 25.98inch * 21.26inch * 14.57inch Loading Container 20GP: 202 cartons * 80 pcs = 16160 pcs40HQ: 469 cartons * 80 pcs = 37520 pcs
£30.99
-
PULUZ For DJI Osmo 360 PULUZ Aluminum Alloy Protective Cage Expansion Frame with Lens Cover, Protective Cage
1. This aluminum alloy camera cage is specifically designed for DJI Osmo 360, providing comprehensive protection and expansion capabilities for the camera. 2. The main frame utilizes lightweight aluminum alloy material, while the detachable lens protector is made of soft silicone for scratch resistance and dust prevention. 3. Standard 1/4-inch screw ports are integrated on the base and sides for stable attachment of tripods, handheld grips, microphones, and other accessories. 4. Features a cold shoe interface for effortless expansion with external devices like fill lights or monitors. 5. Equipped with a locking mechanism for swift cage operation. Enables easy battery replacement without removing the entire camera. 6. Maintains full access to all functional ports, ensuring unobstructed charging, power button operation, screen visibility, microphone openings, and zero lens contact.Specification: General Compatible with DJI: Osmo 360 Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 42cm * 42cm * 26cm / 16.54inch * 16.54inch * 10.24inch Loading Container 20GP: 581 cartons * 100 pcs = 58100 pcs40HQ: 1349 cartons * 100 pcs = 134900 pcs
£13.99
-
STARTRC For DJI RS4 Mini STARTRC Storage Case Box Suitcase, For DJI RS 4 Mini
1. Custom-Fit Design: This storage case is specifically designed for the RS 4 Mini stabilizer and its accessories, ensuring a precise fit. It accommodates the stabilizer body, portable adapter handle, dual-layer quick-release plate, tripod, smart tracking module, and phone clip. The upper cover mesh pocket provides additional space for storing cables, chargers, and other small items. 2. High-Quality Materials: Made of premium PU fabric, the outer shell is pressure-resistant, wear-resistant, and splash-proof. The interior features Lycra double-layer fabric with a shock-absorbing lining that securely holds the stabilizer and accessories, preventing collisions and friction while resisting compression for long-lasting protection. 3. Enhanced Stability & Protection: The case is precisely molded based on the actual device, ensuring a snug fit to prevent shaking during transportation and offering shockproof cushioning. The deepened upper cover mesh pocket minimizes contact between the device and the cover, providing double-layer protection. 4. Convenient Storage & Access : A double-zipper design ensures smooth opening and closing without jamming, making it easy to store and retrieve your device effortlessly. 5. Portable & Versatile Carrying Options: Equipped with a retractable hand strap for easy carrying, as well as an adjustable shoulder strap for crossbody use. This case is perfect for outdoor activities, travel, and daily storage, offering reliable protection for your stabilizer and accessories. Usage Reminder: Before storing, ensure that all stabilizer knobs are returned to their original positions. The power button and device label should face upwards for optimal placement. The stabilizer handle features an ergonomic grip for easy retrieval and display.Specification: General Compatible with DJI: RS 4 Mini Package Weight One Package Weight 1.04kgs / 2.30lb One Package Size 37cm * 11cm * 29cm / 14.57inch * 4.33inch * 11.42inch Qty per Carton 10 Carton Weight 11.50kgs / 25.35lb Carton Size 56cm * 58cm * 38cm / 22.05inch * 22.83inch * 14.96inch Loading Container 20GP: 216 cartons * 10 pcs = 2160 pcs40HQ: 501 cartons * 10 pcs = 5010 pcs
£11.99
-
For DJI Ronin-SC Gimbal Stabilizer Quick Release Plate, For DJI Ronin-SC
1. This quick release plate is designed for DJI Ronin-SC gimbal stabilizer.2. Laser engraved reference scale for easy node adjustment.3. Made of high-quality aluminum alloy to ensure lightweight but ultra-high strength support.4. CNC precision machining, surface oxidation treatment.5. Material: Aluminum Alloy6. Size: 100x39x10 mm7. Weight: about 40gSpecification: General Compatible with DJI: RONIN-SC Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 13cm * 6cm * 3cm / 5.12inch * 2.36inch * 1.18inch Qty per Carton 150 Carton Weight 10.10kgs / 22.27lb Carton Size 41cm * 32cm * 32cm / 16.14inch * 12.6inch * 12.6inch Loading Container 20GP: 635 cartons * 150 pcs = 95250 pcs40HQ: 1474 cartons * 150 pcs = 221100 pcs
£4.99
-
PULUZ PULUZ PC ABS Plastic Protective Frame for Ricoh Theta SC2, with Adapter Mount & Screw, Plastic Frame For Ricoh Theta SC2
Features1. Anti-drop and anti-shock: Anti-shock and efficient protection of the screw holes at the bottom of the camera, no longer have to worry about the deformation of the camera screw holes 2. Exquisite appearance: fuel injection process, exquisite appearance, better heat dissipation, fit the fuselage, and exquisite control of holes 3. Side opening design: The side-opening design is practical and convenient, which can directly install and remove the battery, connect to charge, and replace the memory card 4. Material: Made of PC+ABS plastic material, wear resistant, durable and high quality. 5. Easy to use and easy to install: Easy way to connect your camera to handlebars, helmets, backpack mounts or extension poles. Come with one standard screw, easy and convenient to install and use.Package List1. Protective Frame x 1 2. Wrench x 1 3. Base Adapter x 1 4. Long Screw x 1Specification: General Compatible with RICOH: THETA SC2 Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 22cm * 6cm * 2cm / 8.66inch * 2.36inch * 0.79inch Qty per Carton 100 Carton Weight 5.50kgs / 12.13lb Carton Size 42cm * 32cm * 28cm / 16.54inch * 12.6inch * 11.02inch Loading Container 20GP: 708 cartons * 100 pcs = 70800 pcs40HQ: 1645 cartons * 100 pcs = 164500 pcs
£3.99
-
PULUZ For GoPro MAX2 PULUZ Optical Tempered Glass Lens Guard Protective Cover, Glass Lens Guard
1. Premium 10H Tempered Glass: Made with 10H hardness optical tempered glass, it is highly scratch-resistant, more durable than plastic lens protectors, and offers excellent light transmittance. 2. Full Protection Design: Waterproof, oil-proof, dustproof, and shockproof, effectively preventing scratches and accidental impacts, protecting your action camera lens. 3. Ultra-High Light Transmittance: The lens material has a transparency of up to 99%; the AR coating increases light transmittance to over 98%, resulting in clearer and sharper image quality. 4. Hydrophobic Coating: The special waterproof layer has a 115-degree tilt angle to ensure that no water stains remain on the lens, maintaining shooting clarity even in humid environments. 5. Easy Clip-on Installation: The secure clip-on design allows for quick, simple, and easy installation and removal.Specification: General Compatible with Gopro: MAX2 Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 12cm * 8cm * 3cm / 4.72inch * 3.15inch * 1.18inch Qty per Carton 100 Carton Weight 4.50kgs / 9.92lb Carton Size 42cm * 32cm * 25cm / 16.54inch * 12.6inch * 9.84inch Loading Container 20GP: 793 cartons * 100 pcs = 79300 pcs40HQ: 1842 cartons * 100 pcs = 184200 pcs
£11.99
-
PULUZ For GoPro MAX2 PULUZ Body Lens Silicone Protective Cover, Body Lens Cover
1. Premium Silicone, Full-Cover Protection: Made of flexible, impact-resistant silicone, this cover fully wraps around the lens and camera body gaps to effectively prevent scratches, bumps, and dust intrusion. It safeguards delicate optical components, extends the lifespan of your device, and ensures greater peace of mind during outdoor shooting. 2. Wide Compatibility with Accessories: The protective cover shields both the camera and lens protector. With a bottom opening design, it can be installed without removing a selfie stick or magnetic base, allowing quick and convenient installation while adapting to more shooting scenarios. 3. Ultra-Lightweight & Compact Design: Weighing only 48g, the compact and lightweight structure fits easily into a camera bag or pocket. Ideal for travel and outdoor photography, it provides portable protection without adding extra burden. 4. Flexible Silicone for Damage-Free Installation: Highly elastic silicone material stretches smoothly for easy installation and removal. It fits snugly without snagging and prevents scratches on the camera surface or lens edges, keeping your device in pristine condition. 5. Durable, Anti-Aging & Easy to Clean: Resistant to extreme temperatures and corrosion, the material maintains its shape and color over time without yellowing or deformation. The smooth surface allows stains to be wiped off easily, reducing replacement frequency and long-term usage costs. Note: The camera shown in the images is for display purposes only and is not included.Specification: General Compatible with Gopro: MAX2 Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 14cm * 13cm * 4cm / 5.51inch * 5.12inch * 1.57inch Qty per Carton 120 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 43cm * 40cm / 20.47inch * 16.93inch * 15.75inch Loading Container 20GP: 298 cartons * 120 pcs = 35760 pcs40HQ: 692 cartons * 120 pcs = 83040 pcs
£1.99
-
PULUZ For GoPro MAX2 PULUZ Silicone Dual-Lens Cover, Dual-Lens Cover
1. Premium Silicone Material: Soft, durable, and gentle on the camera lens. 2. Comprehensive Protection: Guards against impacts, cracks, dust, and scratches. 3. Fine Textured Design: Anti-slip outer ring adds grip and aesthetic appeal. 4. Easy Installation & Removal: Flexible structure ensures quick and secure fitting. 5. Compact & Lightweight: Lightweight, perfect for travel. Note:Camera shown in the picture is not included.Specification: General Compatible with Gopro: MAX2 Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 12cm * 10cm * 1cm / 4.72inch * 3.94inch * 0.39inch Qty per Carton 600 Carton Weight 8.80kgs / 19.40lb Carton Size 58cm * 52cm * 30cm / 22.83inch * 20.47inch * 11.81inch Loading Container 20GP: 294 cartons * 600 pcs = 176400 pcs40HQ: 684 cartons * 600 pcs = 410400 pcs
£0.99
-
PULUZ For GoPro MAX2 PULUZ Body Silicone Protective Case with Dual Lens Caps Cover & Strap, Body Case with Dual Lens Cap
Features1. Precisely Customized Fit, Drop and Scratch Resistant: Soft silicone is specially designed for the GoPro Max2, fitting snugly to cushion impacts and scratches, meeting the protection needs of outdoor shooting equipment. 2. Dual Protection for Lens and Body: Includes an independent lens hood to protect the camera lens from dust and fingerprints. Combined with a protective case, it provides full-body protection, addressing the vulnerability of delicate components. 3. Slim and Lightweight Design, Lightweight and Burden-Free: The slim and lightweight design does not affect camera lens imaging. Weighing only 36g, its compact size makes it comfortable to carry for extended periods, enhancing outdoor comfort. 4. Portable Hanging Design, Prevents Loss: Comes with a 51cm long lanyard, supporting neck/backpack attachment, suitable for sports scenarios, preventing the device from slipping and freeing your hands. 5. Stain-Resistant and Easy to Clean, Stays Like New: The black silicone material is stain-resistant; stains can be directly washed with water, keeping the accessories clean and meeting long-term maintenance needs. Note: The camera is for demonstration purposes only and is not included.Package List1. Body silicone case x 1 2. Lens Cover x 1 3. Strap x 1Specification: General Compatible with Gopro: MAX2 Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 14cm * 13cm * 3cm / 5.51inch * 5.12inch * 1.18inch Qty per Carton 200 Carton Weight 10.00kgs / 22.05lb Carton Size 48cm * 34cm * 45cm / 18.9inch * 13.39inch * 17.72inch Loading Container 20GP: 363 cartons * 200 pcs = 72600 pcs40HQ: 842 cartons * 200 pcs = 168400 pcs
£1.99
-
PULUZ For GoPro MAX2 PULUZ Waterproof Housing 50m Dive Case, Waterproof Housing Case
Features1. 45-meter depth protection: Waterproof to 45 meters, compatible with GoPro MAX2, supports panoramic shooting with no blind spots. 2. High optical transmittance: Tempered glass lens element, light transmittance of over 97%, anti-fog and scratch-resistant, clear image quality. 3. Durable and damage-resistant design: Hardened PC shell + 304 stainless steel hinge, silicone waterproof ring, not easily damaged even after long-term use. 4. Convenient underwater operation: Metal touch buttons, will not damage the camera, supports direct operation of the camera underwater. 5. Lightweight and portable: Weighing only 105g, efficient installation, suitable for diving and various scenarios. Note: The camera is for demonstration purposes only and is not included.Package List1. Waterproof housing case x 1 2. Concealed adapter x 1 3. Long screw x 1 4. Anti-fog pad x 12Specification: General Compatible with Gopro: MAX2 Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 16cm * 10cm * 7cm / 6.3inch * 3.94inch * 2.76inch Qty per Carton 40 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 36cm * 36cm / 16.54inch * 14.17inch * 14.17inch Loading Container 20GP: 489 cartons * 40 pcs = 19560 pcs40HQ: 1137 cartons * 40 pcs = 45480 pcs
£16.99
-
PULUZ For GoPro MAX2 PULUZ ABS Battery Side Interface Cover, Side Interface Cover
1. Exclusively designed for GoPro Max2 panoramic cameras. 2. Sturdy and durable, made of high-quality ABS plastic, ensuring durability and allowing for repeated use over extended periods. 3. Charging and protection functions: After replacing the original side cover, the camera can be charged without opening the battery compartment. The charging port has a dust cover to protect it when not charging. 4. Replaces the original protective cover; can replace cracked or damaged original side covers. 5. Camera shown in the picture is not included.Specification: General Compatible with Gopro: MAX2 Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 12cm * 10cm * 1cm / 4.72inch * 3.94inch * 0.39inch Qty per Carton 500 Carton Weight 5.50kgs / 12.13lb Carton Size 42cm * 32cm * 26cm / 16.54inch * 12.6inch * 10.24inch Loading Container 20GP: 763 cartons * 500 pcs = 381500 pcs40HQ: 1771 cartons * 500 pcs = 885500 pcs
£1.99
-
PULUZ For DJI Osmo Action 6 PULUZ Street Photography Handle Ergonomic Hand Grip Cage Frame with Cold Shoe, Street Photography Handle
Features1. Dedicated Fit, Easy Operation: Specifically designed for DJI Action 6 with precise molding for a snug fit. All functional ports are fully accessible, allowing charging and data transfer without removing the grip. 2. Ergonomic Design for Comfortable Shooting: Features a 45 degreee palm-contour design that fits naturally in the hand. The floating shutter button enables quick, light presses for smooth operation and reduced camera shake. 3. Lightweight & Portable for Effortless Creation: Weighing only 60 g, made from lightweight ABS material, ensuring comfortable handheld use for outdoor shooting, street photography, and action follow-ups. 4. Expandable Setup for Creative Flexibility: Dual cold shoe mounts support external microphones and fill lights, meeting professional shooting needs across multiple scenarios. 5. Quick-Release Protection, Safe & Secure: One-second open-and-close design for fast installation and removal. Built-in silicone padding provides scratch resistance, shock absorption, and enhanced drop protection for the camera. Warm Reminder: Camera shown is for display purposes only and is not included.Specification: General Compatible with DJI: Osmo Action 6 Package Weight One Package Weight 0.11kgs / 0.23lb One Package Size 16cm * 10cm * 4cm / 6.3inch * 3.94inch * 1.57inch Qty per Carton 100 Carton Weight 8.80kgs / 19.40lb Carton Size 52cm * 42cm * 33cm / 20.47inch * 16.54inch * 12.99inch Loading Container 20GP: 370 cartons * 100 pcs = 37000 pcs40HQ: 858 cartons * 100 pcs = 85800 pcs
£5.99
-
PULUZ For DJI Osmo Nano PULUZ 45m Depth Waterproof Main Body Camera Case Diving Housing Underwater Cover, For DJI Osmo Nano
Features1. 45-meter depth protection: Waterproof up to 45 meters, compatible with DJI Osmo Nano camera, allowing for easy underwater shooting. 2. High-transparency optical performance: The lens is made of high-transparency optical glass with a light transmittance of over 95%, and features a nano-hydrophobic coating, preventing water droplets from adhering to the lens for clear underwater images and accurate color reproduction. 3. Durable and damage-resistant design: Features a hardened PC casing and 316 stainless steel pivot, with a pressure-activated silicone sealing ring; the greater the water pressure, the better the sealing performance. 4. Lightweight and portable, easy to operate: Weighing only 52.2g, it is easy to use and allows for underwater operation. 5. Wide range of applications: Can be widely used in diving, rafting, surfing, skiing, and other sports. Note: The camera is for illustrative purposes only and is not included.Package List1. Waterproof case x 1 2. Long screw x 1 3. Invisible base x 1Specification: General Compatible with DJI: Osmo Nano Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 13cm * 10cm * 3cm / 5.12inch * 3.94inch * 1.18inch Qty per Carton 80 Carton Weight 5.80kgs / 12.79lb Carton Size 47cm * 31cm * 31cm / 18.5inch * 12.2inch * 12.2inch Loading Container 20GP: 590 cartons * 80 pcs = 47200 pcs40HQ: 1370 cartons * 80 pcs = 109600 pcs
£5.99
-
PULUZ For DJI Osmo Action 6 PULUZ Action Camera Black Mist 1/4 Lens Filter, Black Mist 1/4
1. Optical Glass Lens with True Color Reproduction: Made from high-quality optical glass with multi-layer coating to minimize light loss, ensuring accurate color reproduction and delivering clear, sharp images. 2. Aerospace-Grade Aluminum Frame, Lightweight & Durable: Precision-machined CNC aerospace-grade aluminum frame; Each filter weighs only 4.9g, offering excellent portability while remaining strong and reliable for outdoor use. 3. Nano Coating for Enhanced Protection: Double-sided nano coatings provide hardened, water-repellent, oil-resistant, and anti-reflection performance, making the filter scratch-resistant, easy to clean, and longer-lasting. 4. Quick-Release Design for Easy Operation: Innovative quick-release mechanism allows instant attachment and removal with a single click, enabling fast filter changes during shooting without missing key moments. 5. Designed for Creative Control: The 1/4 Black Mist filter softens the image, creating a dreamy atmosphere, reducing skin imperfections, and is suitable for portrait and landscape photography.Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 7cm * 7cm * 2cm / 2.76inch * 2.76inch * 0.79inch Qty per Carton 400 Carton Weight 10.50kgs / 23.15lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 400 pcs = 221600 pcs40HQ: 1286 cartons * 400 pcs = 514400 pcs
£5.99
-
PULUZ For DJI Osmo Action 6 PULUZ Action Camera CPL Lens Filter, CPL
1. Optical Glass Lens with True Color Reproduction: Made from high-quality optical glass with multi-layer coating to minimize light loss, ensuring accurate color reproduction and delivering clear, sharp images. 2. Aerospace-Grade Aluminum Frame, Lightweight & Durable: Precision-machined CNC aerospace-grade aluminum frame; Each filter weighs only 4.9g, offering excellent portability while remaining strong and reliable for outdoor use. 3. Nano Coating for Enhanced Protection: Double-sided nano coatings provide hardened, water-repellent, oil-resistant, and anti-reflection performance, making the filter scratch-resistant, easy to clean, and longer-lasting. 4. Quick-Release Design for Easy Operation: Innovative quick-release mechanism allows instant attachment and removal with a single click, enabling fast filter changes during shooting without missing key moments. 5. Designed for Creative Control: It eliminates reflections from surfaces like water and glass, making the sky bluer, the water clearer, and improving color saturation and image clarity.Specification: General Compatible with DJI: Osmo Action 6 Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 7cm * 7cm * 2cm / 2.76inch * 2.76inch * 0.79inch Qty per Carton 400 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 400 pcs = 221600 pcs40HQ: 1286 cartons * 400 pcs = 514400 pcs
£5.99
-
PULUZ For DJI Osmo Action 6 PULUZ Action Camera UV Lens Filter, UV
1. Optical Glass Lens with True Color Accuracy: Crafted from premium optical glass with multi-layer coating to reduce light loss, ensuring true-to-life color reproduction and delivering clear, sharp image quality. 2. Aerospace-Grade Aluminum Frame, Lightweight & Durable: Built with CNC-machined aerospace-grade aluminum alloy; each filter weighs only 4.5 g, offering excellent portability while remaining strong and reliable for outdoor use. 3. Nano Coating for Enhanced Protection: Double-sided nano coatings provide hardened, water-resistant, oil-repellent, and anti-reflection performance, making the filter scratch-resistant, easy to clean, and long-lasting. 4. Quick-Release Design for Easy Operation: Innovative quick-release mechanism allows fast attachment and removal with a single click, enabling quick filter changes during shooting without missing key moments. 5. Lens Protection & Improved Image Quality: Helps protect the camera lens while reducing ultraviolet interference, enhancing overall image clarity and visual performance.Specification: General Compatible with DJI: Osmo Action 6 Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 7cm * 7cm * 2cm / 2.76inch * 2.76inch * 0.79inch Qty per Carton 400 Carton Weight 10.50kgs / 23.15lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 400 pcs = 221600 pcs40HQ: 1286 cartons * 400 pcs = 514400 pcs
£4.99
You have seen 24 out of 308 products