Diagnostic Scan Tools
-
For Mercedes Benz Tester C4 Cable OBD2 SD MB Star C4 C5 Car Diagnostic Tool Cable
1. Voltage: 12-24V2. Applicable models: for Benz MB Star C4 C53. Usage: automotive diagnostic tool connection cable4. Meticulous workmanship, durable and reliable5. Easy operation, plug and play6. Cable length: about 3mSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 20cm * 13cm * 3cm / 7.87inch * 5.12inch * 1.18inch Qty per Carton 60 Carton Weight 16.10kgs / 35.49lb Carton Size 47cm * 42cm * 28cm / 18.5inch * 16.54inch * 11.02inch Loading Container 20GP: 482 cartons * 60 pcs = 28920 pcs40HQ: 1120 cartons * 60 pcs = 67200 pcs
£4.99
-
ANCEL BM700 Upgraded Version For BMW Full System Diagnostic OBDII Tester Maintenance And Resetting Repair Tools, BM700 Upgraded Version
1. This professional scanner for BMW/Mini can read the fault code memory of your vehicles ECU (such as engine, transmission, ABS, TPMS, SRS, air conditioning, anti-theft system, etc.) and gain in-depth understanding of your vehicles condition, and supports body, chassis, drive and all control module inspections. All error codes can be deleted after diagnosis. This helps you detect errors before damaging your vehicle.2. OBD-level diagnosis for all car brands: allows you to easily diagnose engine problems and turn off warning lights.3. It can not only accurately determine the code and possible causes, but also perform OBD test modes such as real-time data streaming, EVAP system testing. Real-time parameters display the vehicles sensor data for a better understanding of your car.4. Strong compatibility, supports modern and older B-M-W models with OBD I port from 1987-1996. Applicable to all gas-powered cars from 1996 and newer.5. Supports 12 different languages ??(English, French, Spanish, Russian, Italian, Portuguese, German, Finnish, Polish, Danish, Swedish, Norwegian), easier to use, localized language diagnostic reports are more professional.6. BM700 can read fault codes from all important built-in electronic control units, deeper than OBD level. You will receive the exact same codes as any professional garage, as well as an explanation of the severity. After performing the diagnosis, you will receive a fault report, but not every fault code means a current defect. Clear the OBD and manufacturer-level codes and perform a second diagnosis. The remaining codes require your attention.7. BM700 scanner with 2.8-inch TFT 262K true color display, the test results are displayed on the LCD, and the data is very easy to understand.8. Basic functions: read and erase fault codes; read data stream; retrieve VIN information.9. Advanced functions: CBS reset/correction, EPB replacement, SAS learning, DPF regeneration, EGS clear adaptation, battery registration, fuel pump reset (F chassis only), TPS adjustment, DME/DDE engine special functions, injector coding (IQA), idle adjustment, ECU reset (ACMS/RDC reset), etc.10. Vehicle functions compliant with OBD II protocol: read and erase fault codes, retrieve VIN information, test EVAP system, read data stream, I/M ready, battery test.Specification: General Compatible with BMW: 520d, 540i(G30), 525Li（G38）, 118i, MINI Cooper JCW One F54, Mini R52, 320Li, X4 M, 225i, 218i, 730i, F44, X7（G07), E60, E70, X5M, 530Li, E93, MINI one cooper F56, 540Li, F20, F32, Mini F54, MINI R59, MINI R58, MINI R57, MINI R53, MINI R50, MINI R56, MINI Paceman R61, MINI cooper Countryman clubman F60, MINI Cooper JCW One F55, Mini F56, M240i xDrive, M240i, 740i xDrive, 740e xDrive, 540i xDrive, 530i xDrive, 440i xDrive Gran Coupe, 440i xDrive, 440i Gran Coupe, 440i, 430i xDrive Gran Coupe, 430i xDrive, 430i Gran Coupe, 430i, 340i GT xDrive, 330i xDrive, 330i GT xDrive, 230i xDrive, 230i, M2, 340i xDrive, 340i, 330e, X4(G02/F26), M4, M235i xDrive, Alpina B6 xDrive Gran Coupe, 740Ld xDrive, 435i xDrive Gran Coupe, 435i Gran Coupe, 428i xDrive Gran Coupe, 428i Gran Coupe, 228i xDrive, M6 Gran Coupe, M235i, i8, i3, 640i xDrive Gran Coupe, 640i xDrive, 535d xDrive, 535d, 435i xDrive, 435i, 428i xDrive, 428i, 335i GT xDrive, 328i GT xDrive, 328d xDrive, 328d, 228i, X1, ActiveHybrid 7, ActiveHybrid 3, 740Li xDrive, 650i xDrive Gran Coupe, 650i Gran Coupe, 640i Gran Coupe, 320i xDrive, 320i, 135is, ActiveHybrid 5, 650i xDrive, 640i, Alpina B7L xDrive, Alpina B7L, Alpina B7 xDrive, 740Li, 550i xDrive, 535i GT xDrive, 335is, 1 Series M, 750Li xDrive, 750i xDrive, 550i GT xDrive, 550i GT, 535i GT, 535i xDrive, 528i xDrive, 335i xDrive, 335d, 328i xDrive, X6(G06), 535xi, 528xi, 135i(F40), 128i, Alpina B7, 335xi, 335i, 328xi, M6, 750Li, 750i, 650i, 550i, 530xi, 525xi, X3(F25), 760i, 645Ci, 545i, Z4(G29), 760Li, 745Li, 745i, 330xi, 330i(G20), 330Ci, 325xi, 325Ci, Z8, X5(G05), 328Ci, 323Ci, 323is, 323i, 528i, Z3, 328is, 328i, 318ti, 850CSi, 840Ci, 540i, 530i, 850Ci, 740iL, 740i(G11), 525iT, M5, 850i(G14), 318is, 318i(E46), M3, 750iL, 735iL, 735i, 535i, 525i, 325iX, 325is (E36), 325i, X6M, E39, E90, F10, E87, 528Li, E92, F34, F30, MINI R55, MINI cooper Countryman clubman F55, MINI Countryman R60, MINI cooper Countryman clubman F56, MINI Cooper JCW One F56, X2, ix3 Package Weight One Package Weight 0.51kgs / 1.13lb One Package Size 20cm * 15cm * 5cm / 7.87inch * 5.91inch * 1.97inch Qty per Carton 28 Carton Weight 15.10kgs / 33.29lb Carton Size 42cm * 32cm * 37cm / 16.54inch * 12.6inch * 14.57inch Loading Container 20GP: 536 cartons * 28 pcs = 15008 pcs40HQ: 1244 cartons * 28 pcs = 34832 pcs
£88.99
-
ANCEL ANCEL AD530 2.8-Inch Screen OBD2 Car Engine Tester Car Battery Test Tool, AD530
1. AD530 can not only check engine faults and provide maintenance suggestions, but also serve as a professional battery tester that can check the health of the car battery.2. AD530 car diagnostic scanner supports turning off the malfunction indicator light (MIL), reading/clearing fault codes and resetting monitors, drawing real-time data flow charts, displaying freeze frame data, testing O2 sensors, EVAP system tests, I/M readiness status (emissions), testing advanced on-board monitoring and retrieving vehicle information (VIN). In addition, this car code reader is equipped with the latest industrial chips, and the scanning speed is 2 times faster than other car code readers.3. AD530 can check the real-time battery voltage, then compare it with the voltage parameters in the reference system, and finally display the test results in text and graphics; through the prompts of the interface and the changes in the real-time voltage graph, you can better understand the health of the battery or the expected remaining life.4. When you press the "i" key, you will get accurate repair instructions instead of a bunch of technical terms that you dont understand. You can save the trouble of going to the mechanic and can decide whether you can solve the problem yourself or need more advanced help, saving your money and time; you can also print fault codes with code definitions.5. The product is equipped with a 2.8-inch color TFT screen, upgraded to STM 32-bit CPU, with high speed and stable performance.6. The AD530 engine light diagnostic scan tool can fully diagnose your cars data, displaying graphical data streams: calculated load value, engine coolant temperature, intake manifold absolute pressure, vehicle speed, intake air temperature, air flow sensor, air pressure, control module voltage, fuel rail pressure, etc. Compared with other simple scanners, AD530 can more intuitively understand the engines operating status.7. Screen size: 2.8 inches8. Screen resolution: 320 x 2409. Product size: 3.6 x 6 x 1 inches10. Weight: about 400 gramsSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 20cm * 14cm * 3cm / 7.87inch * 5.51inch * 1.18inch Qty per Carton 40 Carton Weight 21.10kgs / 46.52lb Carton Size 42cm * 30cm * 32cm / 16.54inch * 11.81inch * 12.6inch Loading Container 20GP: 661 cartons * 40 pcs = 26440 pcs40HQ: 1535 cartons * 40 pcs = 61400 pcs
£63.99
-
ANCEL ANCEL 12V/24V Printer-Type Car Battery Tester Battery Power CCA Internal Resistance Life Detector, BST600
1. BST600 is a powerful battery tester that can not only test 12V batteries, but also handle 24V batteries, fully analyzing the batterys health, state of charge, temperature, CCA value, Ah input, voltage, internal resistance, ripple voltage, etc.2. Built-in integrated printer compatible with standard thermal paper, which can save time and money by quickly printing work orders, seamless customer sharing and simplifying record keeping.3. Compatible with a variety of vehicles, such as sedans, heavy trucks, as well as marine, lawn mowers, RVs and golf carts.4. BST600 also supports 12V and 24V lead-acid batteries with a capacity of 100-2000 CCA, and various types including conventional flooded, AGM flat plate, AGM spiral, EFB and GEL batteries.5. The sturdy fixture features loose lead detection, spark protection, reverse polarity, short circuit and overload protection to ensure your battery and personal safety. Even if you accidentally mishandle the electrodes, performance is fully enhanced compared to standard clamps, ensuring greater safety.6. The BST600 is equipped with a 3.2-inch color backlit LCD display, providing easy-to-read visual data.7. The housing is made of acid-resistant ABS plastic for durability and anti-slip performance, equipped with a silicone anti-break cable cover, and the soft rubber buttons add a comfortable touch while ensuring they are wear-resistant.8. The BST600 also tests whether the battery temperature meets the optimal range, preventing overheating or cold-related problems, thereby improving performance, safety and service life.9. Compared with ordinary battery testers, the BST600 is more than 10% more accurate because the strong clamping force of the rust-proof clamp reduces interference, even in humid environments, thereby improving test accuracy. The advanced smart chip accurately interprets the results, ensuring precise battery evaluation.10. The BST600 battery tester is designed to evaluate the batterys starting/starting system, determining whether your 12V and 24V electrical system can produce enough power to start the engine. Quick diagnostics identify potential problems in seconds, saving you time and giving you peace of mind on the road.11. BST600 can effectively check your vehicles 12V or 24V charging system. This test determines the charging system by testing the condition of the charging system under load and no-load conditions.12. Test results include normal, general, warning, and check now; identify potential problems early, prevent unexpected failures, and save future repair costs.13. Multi-language support, including English, German, Italian, French, Spanish, Polish, Russian, Dutch, Japanese, Chinese, ensures ease of use and convenience for global users.Specification: Package Weight One Package Weight 0.86kgs / 1.90lb One Package Size 33cm * 20cm * 8cm / 12.99inch * 7.87inch * 3.15inch Qty per Carton 8 Carton Weight 7.98kgs / 17.59lb Carton Size 35cm * 42cm * 34cm / 13.78inch * 16.54inch * 13.39inch Loading Container 20GP: 533 cartons * 8 pcs = 4264 pcs40HQ: 1238 cartons * 8 pcs = 9904 pcs
£103.99
-
Automotive Electrical Circuit Tester System Short Circuit Tracking Positioning Diagnostic Instrument, P55
1. Working voltage: 12-24V2. Working current: 80ma3. Overload protection: 8A4. Cable length: 4M5. Humanized dual LED design, easy to use at night or in low-light environments6. When the probe touches the positive circuit, the device will light up red7. When the probe touches the negative circuit, the device will light up green8. Functions: component activation, continuity test, ground detection, tracking and positioning short circuit, positive and negative pole detection9. Weight: about 210g10. Size: 135x35x20mm (only for the main body)Specification: Package Weight One Package Weight 0.28kgs / 0.63lb One Package Size 25cm * 9cm * 5cm / 9.84inch * 3.54inch * 1.97inch Qty per Carton 56 Carton Weight 16.20kgs / 35.71lb Carton Size 52cm * 35cm * 39cm / 20.47inch * 13.78inch * 15.35inch Loading Container 20GP: 375 cartons * 56 pcs = 21000 pcs40HQ: 872 cartons * 56 pcs = 48832 pcs
£9.99
-
Automobile Fault Diagnostic Instrument OBD2 Engine Tester ELM327, T200
1. Left and right silicone anti-slip design, soft rubber buttons feel comfortable2. ABS shell is sturdy and durable, pure copper wire core transmits faster3. Quickly read car faults and clear engine fault lights4. View real-time car data, vehicle condition data at a glance, escort your travel5. Simple operation, I/M and V keys are shortcut keys, you can quickly view the specified function with one key6. Support multiple languages: English, Simplified Chinese, Spanish, French, Italian, Russian7. Support software upgrades, you can download the upgrade program through the PC, and connect the device through the USB circuit for upgrade8. Intelligent matching, automatic scanning connection, no need to manually select the brand model, more convenient to use9. When the vehicle cannot be diagnosed during travel, you can use the OBD voltage function to check the voltage of each OBD pin to help us find vehicle faults faster, supporting Bus positive line, CAN-H line, K-line, Bus neative line, CAN-L line, L-line, VIN and other voltage detection10. Display: 2.4-inch TFT color screen (320x240)11. External power supply: 8V-30V DC12. Dimensions: 140x30mm13. Weight: 0.3kgSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 13cm * 17cm * 4cm / 5.12inch * 6.69inch * 1.57inch Qty per Carton 66 Carton Weight 19.80kgs / 43.65lb Carton Size 41cm * 36cm * 42cm / 16.14inch * 14.17inch * 16.54inch Loading Container 20GP: 430 cartons * 66 pcs = 28380 pcs40HQ: 998 cartons * 66 pcs = 65868 pcs
£14.99
-
ANCEL ANCEL BM200 12V Bluetooth 4.2 Car Battery Analysis and Detection Tool Battery Tester, BM200
1. Detection system: car battery2. Bluetooth version: 4.23. Power supply voltage: 12V4. Average power consumption: 1.5mA5. Input voltage: DC 6V-20V6. Voltage error: 0.03V7. Operating temperature: -40 to 90 degrees Celsius (-40 to 194 degrees Fahrenheit)8. Reverse protection: support9. Short protection: support10. Waterproof level: IP6711. Product size: 55 x 41 x 12.5mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 13cm * 3cm / 5.91inch * 5.12inch * 1.18inch Qty per Carton 48 Carton Weight 3.98kgs / 8.77lb Carton Size 32cm * 28cm * 38cm / 12.6inch * 11.02inch * 14.96inch Loading Container 20GP: 783 cartons * 48 pcs = 37584 pcs40HQ: 1818 cartons * 48 pcs = 87264 pcs
£20.99
-
V066 Car Brake Fluid Detection Pen Moisture Tester, V066
1. DOT3/DOT4/DOT5.1 oil type detection can be switched with one button, and can be used quickly regardless of brand. 2. Intelligent automatic shutdown, it will automatically enter shutdown state after 3 minutes of non-use. 3. Two screen brightness displays, easy to use in strong light and dark light. 4. Working voltage: 3V 5. Working current: 20-25mA 6. Size: 156x65x22.3mm 7. Weight: 121gSpecification: Package Weight One Package Weight 0.19kgs / 0.41lb One Package Size 24cm * 13cm * 3cm / 9.45inch * 5.12inch * 1.18inch Qty per Carton 60 Carton Weight 12.30kgs / 27.12lb Carton Size 54cm * 42cm * 24cm / 21.26inch * 16.54inch * 9.45inch Loading Container 20GP: 489 cartons * 60 pcs = 29340 pcs40HQ: 1137 cartons * 60 pcs = 68220 pcs
£12.99
-
Vehicle Circuit Diode Tester Multifunctional Drive Detectors, MZ-823
1. Scope of application: support all 3.5-36V electrical system testing, including cars, pickup trucks, off-road vehicles, motorcycles, engineering vehicles, boats, etc2. LCD high-definition display, data at a glance3. Lighting design, convenient for night maintenance lighting4. Multiple testing functions, easy to useParameters:1. Overcurrent protection current: 8A2. DC voltage range: DC 3.5-36V3. Rated current: 1-8Amp4. Accuracy: +/- 2 percent5. Material: ABS6. Wire length: 4.5m7. Operating temperature: -10-60 degrees celsius8. Relative humidity: less than or equal to 80 percent9. External power supply: 12V or 24V DC through vehicle battery10. Size: 240 x 40 x 28mmSpecification: Package Weight One Package Weight 0.39kgs / 0.87lb One Package Size 28cm * 14cm * 5cm / 11.02inch * 5.51inch * 1.97inch Qty per Carton 40 Carton Weight 16.00kgs / 35.27lb Carton Size 60cm * 57cm * 30cm / 23.62inch * 22.44inch * 11.81inch Loading Container 20GP: 259 cartons * 40 pcs = 10360 pcs40HQ: 603 cartons * 40 pcs = 24120 pcs
£8.99
-
Ancel ANCEL 12V LED Car Battery Tester SOH/SOC Rechargeable Battery Analysis Tool, BM200 PRO
1. Applicable batteries: all 12V lead-acid batteries2. Input voltage: 6V~25V3. Power consumption: 2.3 ma (average)4. RF: 33MHz5. Display: 9 LED indicators6. Protection: short circuit and overcurrent protection7. Lithium battery capacity: 750mAh8. Charging input: Solar panel type C port (5V)9. Monitor: Monochrome LCD screen with backlight10. Real-time display of battery health value, temperature, charging and voltage11. Battery starting system and charging system monitoring12. Data abnormality alarm to remind you of battery status in time13. It is powered by solar panels and has a Type-C charging interface. It consumes very little power and can be used for a week on a single charge.14. 433MHz precise transmission, real-time monitoring of battery status15. Intelligent vibration sensing, smart screen off and on, automatic switch, low power consumption16. Suitable for all 12V starting batteries, widely used in cars, trucks, yachts, and motorcyclesSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 14cm * 10cm * 6cm / 5.51inch * 3.94inch * 2.36inch Qty per Carton 45 Carton Weight 10.10kgs / 22.27lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 45 pcs = 26595 pcs40HQ: 1373 cartons * 45 pcs = 61785 pcs
£27.99
-
Launch Launch Creader CR529 OBD2 Car Engine Fault Tester Code Scanner
Function:1. Read and clear engine error code; turn off engine checking2. Real-time data/framing: when an emission-related fault occurs, it records certain vehicle conditions to better locate the abnormal position and find the cause of the abnormality during maintenance3. Detects whether various emission-related systems on the vehicle are functioning properly and is ready for inspection and maintenance testing4. Can automatically read the vehicle identification code on the ECU of the vehicle5. Memory code reading6. Pending code reading7. Oxygen sensor test: allows retrieval and viewing of oxygen sensor monitor test results from the on-board computer for the most recently performed test8. You can view the results of on-board monitor tests that are useful after servicing or erasing the vehicle control module memory9. Displays the vehicle identification number (VIN), calibration identification number, and calibration verification number (CVN) of the test vehicle1. Plug and play, no batteries required, easier to use2. Color LCD display, easy to operate, data at a glance3. Quickly retrieve vehicle VIN, accurate troubleshooting4. Rugged material to withstand daily impacts5. Whether you are a family car owner or a car mechanic, you can save money on car maintenance, save time and effort on repairs, and improve the life/performance of your car6. 7 languages can be switched: English, French, Spanish, German, Portuguese, Russian, Japanese7. Can be connected to a computer to realize the search, data playback and printing functions, etc8. Voltage: 8-12V9. Operating temperature: 0-45 degrees celsius10. Size: 103 x 179 x 30mmSpecification: Package Weight One Package Weight 0.45kgs / 1.00lb One Package Size 30cm * 21cm * 4cm / 11.81inch * 8.27inch * 1.57inch Qty per Carton 30 Carton Weight 15.00kgs / 33.07lb Carton Size 51cm * 41cm * 47cm / 20.08inch * 16.14inch * 18.5inch Loading Container 20GP: 271 cartons * 30 pcs = 8130 pcs40HQ: 629 cartons * 30 pcs = 18870 pcs
£35.99
-
KONNWEI KONNWEI KW218 2.4 inch Color Screen Car Battery Tester, KW218
About Product:1. Battery testing is mainly to analyze the health status of the battery, calculate the actual cold start capability and aging degree of the battery, and provide reliable analysis basis for battery testing and maintenance. If the battery ages, the user can be notified in advance to replace the battery.2. Mainly used for testing and analyzing the starter motor. Testing the actual starting current and starting voltage required by the starter motor will help determine whether the starter motor is working properly. A starting failure may cause the starting load torque to increase; or the rotor friction of the starter motor may cause the friction of the starter motor itself to increase.3. This product checks and analyzes the charging system, including the generator, rectifier, rectifier diode, etc., to find out whether the output voltage of the generator is normal and whether the rectifier diode is working normally. If it is abnormal, it will cause the battery to be overcharged or undercharged. , resulting in rapid battery damage and greatly shortening the life of other batteries. Loaded device.4. The car battery tester can effectively analyze and read important car data, such as voltage, internal resistance, cold start system, battery health and charging status.Functions:1. System voltage: 6-12V2. Test result: good, charge or replace3. Capacity: Cold cranking ampere (CCA), DIN, EN and IEC information related to battery rating.4. Internal resistance value (megaohms)5. Life span percentage (%)6. Crankshaft system7. Charging system8. Waveform voltage test9. Record and playback battery data10. Additional functions such as battery test, startup test, charging test, etc.Parameters:1. Product size: 14x8x2cm2. Product weight: 200G3. Working temperature: 0-50 degrees Celsius4. Voltage measurement range: DC 5-16V5. Supports 8 languages: English, French, Spanish, German, Russian, Italian, Portuguese, DutchSpecification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 17cm * 9cm * 7cm / 6.69inch * 3.54inch * 2.76inch Qty per Carton 80 Carton Weight 21.00kgs / 46.30lb Carton Size 52cm * 35cm * 41cm / 20.47inch * 13.78inch * 16.14inch Loading Container 20GP: 357 cartons * 80 pcs = 28560 pcs40HQ: 829 cartons * 80 pcs = 66320 pcs
£15.99
-
CNBJ-707 4 Pin 5 Pin Relays Quick Tester, CNBJ-707
CNBJ-707 is a quick go/no-go tester for relays that provides you with an indication of the general health and functioning of the most common Automotive relays. Tester will check for proper functioning of the relay contacts by connecting the car battery (11V--15V) to the relay coil. Tester will watch the pin configuration,the time to contacts closure and opening, consistency of the relay during each test session, Tester will light the GREEN LED if all passed during the test session,if not light theRED LED. Operating Instructions: 1. Connect the power leads to the car battery -- black alligator clip to negative terminal, red alligator clip to positive terminal. 2. Tester is powered up when the LED illuminates in RED. 3. Check the relay before plugging into the tester. If it is a 4 pin relay, select "4 pin" on the tester.If it is a 5 pin relay, select "5 pin" on the tester. 4. Plug in the relay into one of the three receptacles. 5. Press the "Test" button. 6. Tester will check the pin configuration of the unknown relay. Tester will light the RED LED if the unkonwn relay is not the same to the most of common automotive relaysor the pin of the unknown relay is destroyed. 7. Tester will open and close the relay 10 times for testing the time to contacts closure and opening if the pin configuration of the relay is right. Tester will light the RED LED immediately if the time is overtime. 8. Tester will check the consistency of the relay after testing the time to contacts closure and opening ten times. Tester will light the GREEN LED if the test passed, if not light the RED LED. 9. Disconnect power leads from the car battery and remove relay from the tester. Attention: 1. The car battery must be 12V battery, and the voltage of the battery is among 11V-15V. 2. Ideal for coil resistance above 20 ohms.Specification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 30cm * 18cm * 4cm / 11.81inch * 7.09inch * 1.57inch Qty per Carton 40 Carton Weight 10.20kgs / 22.49lb Carton Size 62cm * 37cm * 42cm / 24.41inch * 14.57inch * 16.54inch Loading Container 20GP: 276 cartons * 40 pcs = 11040 pcs40HQ: 642 cartons * 40 pcs = 25680 pcs
£4.99
-
CNBJ-620 Automobile Injector Tester, CNBJ-620
About The ProtuctThis instrument can help you diagnose injector problems, and can test the fuel injectors one by one to help confirm the stuck, leaking or combustion finished condition. It has four kinds of pulse signal output mode, users can choose any one according to their needs. Using 12V automobile battery as the power supply, the continuous working mode can identify the quality of the fuel injector when the engine is off, and the mode locking function ensures the consistency when testing the fuel injector. This instrument can be used with any fuel pressure testerOperating Instructions1. Tumn off the engine of the car. 2. Remove the wire plug with the fuel injector to be tested, and then connect the two pulse output terminals of the instrument with the fuel injector of the vehicle. 3. Connect the red clip of the instrument to the positive pole of 12V automobile battery, and connect the black clip of the instrument to the negative pole of the battery. 4. Press "Mode set" key to select the required pulse signal output mode, and the screen will display the currently selected mode. The different models are explained as follows: Mode "1": single pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out a pulse with a pulse width of about 255 Ms. Mode "2": short pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out 50 pulses with a pulse width of about 7Ms. Mode "3": long pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out100 pulses with a pulse width of about 3.5 Ms. Mode "4": continuous pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will continuously output pulses with a pulse rate of about 50 pulses per 1450 MS and a pulse width of about 7Ms.Press the "Pulse" key again to terminate the pulse output. 5. After selecting the required pulse signal output mode, press the "Pulse" key, the instrument will output pulse to the fuel injector to be tested, and the signal indicator will be on when the pulse is output. 6. After the test is completed, if it is necessary to repeat the test, press the "Pulse" key again; if you want to change the pulse mode, press the "Reset" key, you can select the required mode at will, and then test the fuel injector again.Warning1. The engine of the car must be turned off before using this instrument. 2. Do not smoke or ignite near the car. 3. Donot splash the fuel on the hot engine parts. 4. Use this instrument only in ventilated places. Do not inhale the exhaust gas from the car and the steam generated by the fuel flying. 5. Do not get close to the rotating (or moving) parts of any car, and do not touch the heating parts of any car. 6. Do not short circuit the positive and negative electrodes of the automobile battery. 7. Do not touch any auto parts with dangerous voltage 8. Always follow the warnings, cautions and maintenance instructions in the vehicle maintenance manual. 9. Wear qualified goggles. 10. After the test, all disconnected vehicle connections should be restored correctly.Specifications1. 12V battery power supply 2. Working conditions: 0-40 degree C; relative humidity less than and equal to 80% 3. Storage conditions:-20C -50a??;relative humidity less than and equal to 85%Specification: Package Weight One Package Weight 0.24kgs / 0.53lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 9.80kgs / 21.61lb Carton Size 42cm * 33cm * 42cm / 16.54inch * 12.99inch * 16.54inch Loading Container 20GP: 458 cartons * 40 pcs = 18320 pcs40HQ: 1063 cartons * 40 pcs = 42520 pcs
£9.99
-
JDiag JDiag Mini Circuit Tester AC/DC Detection Multi-function Oscilloscope, P50 PRO
1. DC detection: 0.1-45VAC2. Working current: 40mA3. Battery capacity: 200mA4. Battery life: about 4-5 hours5. Frequency bandwidth: 10Hz-200KHz6. Test lamp power: 12V/24V power 5W7. Can quickly detect various communication line signals, sensor signals, as well as various test lamp tests and voltage measurements8. Small size, high precision, supports AC/DC signal mode, frequency range 10Hz-200KHz, easily detects and repairs vehicle sensor faults9. Multi-function test lamp, supports 5W power test lamp, LED test lamp, and multiple test lamp modes to meet different line test needs10. Flashlight lamp beads, high brightness, low power consumption, can illuminate the working area in front of the probe for you in dark places11. AC/DC detection, supports DC and AC voltage detection, and can record the voltage value during the measurement process, which is very convenientSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 21cm * 6cm * 3cm / 8.27inch * 2.36inch * 1.18inch Qty per Carton 192 Carton Weight 22.20kgs / 48.94lb Carton Size 52cm * 35cm * 39cm / 20.47inch * 13.78inch * 15.35inch Loading Container 20GP: 375 cartons * 192 pcs = 72000 pcs40HQ: 872 cartons * 192 pcs = 167424 pcs
£27.99
-
MS310 LCD Screen Car Battery Tester ODB2 Fault Detector, ODB2 Fault Detector
1. Quickly read the current fault code of the car and clear the fault indicator light. 2. Battery life detection and timely understanding of car battery status. 3. Quickly read various real-time data streams of the car engine, and the real-time data is clear and clear. 4. The APP automatically queries the latest firmware version of the device and automatically upgrades wirelessly. 5. Function buttons, simple and clear.Specification: Package Weight One Package Weight 0.27kgs / 0.60lb One Package Size 20cm * 13cm * 2.8cm / 7.87inch * 5.12inch * 1.1inch Qty per Carton 60 Carton Weight 17.70kgs / 39.02lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 60 pcs = 30840 pcs40HQ: 1194 cartons * 60 pcs = 71640 pcs
£11.99
-
LCD Screen Car Battery Tester, Battery Tester
1. LCD color screen,makes it clearer and brighter to see at night. 2. AlI 12V Lead-acid Batteries AGM-GEL-SPIRAL-SLI 3. Add 12V lithium battery test 4. Test results can be stored as QR code 5. Continuous test without heating 6. Langueges:English, French, Turkish, Portuguese, Dutch, Spanish, German, Russian, Simplified Chinese, ThaiSpecification: Package Weight One Package Weight 0.45kgs / 1.00lb One Package Size 25cm * 11cm * 8cm / 9.84inch * 4.33inch * 3.15inch Qty per Carton 40 Carton Weight 19.50kgs / 42.99lb Carton Size 52cm * 46cm * 42cm / 20.47inch * 18.11inch * 16.54inch Loading Container 20GP: 265 cartons * 40 pcs = 10600 pcs40HQ: 616 cartons * 40 pcs = 24640 pcs
£23.99
-
KONNWEI KONNWEI BK200 6V/12V/24V Car Bluetooth Battery Tester
Parameters:1. Product size: 13x3.5x2cm2. Product net weight: 0.14kg3. Bluetooth: Support Android 5.0 or above / IOS 8.0 or above.4. Application: Ordinary lead-acid batteries, AGM flat batteries, AGM spiral batteries, colloidal batteries, etc. on cars & motorcycles & lawn mowers & ships5. Supporting equipment: Android, iOS, iPad6. Function: support to share battery test results and generate reportsFeatures:1. Using international conductivity testing technology, it can easily, quickly and accurately measure the actual cold start current capability of the vehicle starting battery, the health status of the battery itself, common faults of the vehicle starting system and charging system, and provide help for maintenance personnel to quickly and accurately find out problem, so as to achieve rapid repair.2. Support analysis and reading of important car data such as voltage, internal resistance, cold crank amplifier, battery health and state of charge. It provides accurate results, calculating the cold crankability and aging of the battery, making car repairs faster and more accurate.3. No need to disassemble the battery, just get on the car and test it.4. Compatible with all 6V/12V/24V car batteries.5. Support 13 languages: Chinese, English, German, French, Japanese, Dutch, Russian, Spanish, Italian, Persian, Portuguese, Polish.Specification: Package Weight One Package Weight 0.19kgs / 0.42lb One Package Size 18.5cm * 8cm * 5cm / 7.28inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 48cm * 38cm * 40cm / 18.9inch * 14.96inch * 15.75inch Loading Container 20GP: 365 cartons * 100 pcs = 36500 pcs40HQ: 848 cartons * 100 pcs = 84800 pcs
£17.99
-
12V Automotive Battery Tester Fault Diagnosis Instrument, Clip
1. No need to charge, alligator clip, all-in-one design, ergonomic design2. Battery function detection, check the charging level, check the battery startup performance, battery overload prompt3. LED light display, reverse connection protection4. Quick detection and easy operation5. No screw holes, not easy to rust, long service life6. ABS environmental protection material, effectively anti-fingerprint, anti-fouling7. Operating temperature: 0 to 60 degrees Celsius8. Voltage: 12V9. Size: about 12x4.8x1.85cm10. Weight: about 57gSpecification: General Certificate EMC Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 12.5cm * 6cm * 2cm / 4.92inch * 2.36inch * 0.79inch Qty per Carton 356 Carton Weight 21.36kgs / 47.09lb Carton Size 50cm * 50cm * 42.7cm / 19.69inch * 19.69inch * 16.81inch Loading Container 20GP: 249 cartons * 356 pcs = 88644 pcs40HQ: 579 cartons * 356 pcs = 206124 pcs
£1.99
-
Portable Digital LCD Tire Wheel Air Pressure Gauge Tester, Air Pressure Gauge Tester
Model Name:Mini Tire Pressure Gauge feature: 1. Improve fuel efficiency, environmental protection and energy saving 2. Keychain design, easy to carry 3. Reduce tire wear and extend tire life 4. Must have monthly tire inspection items 5. Proper inflation can prevent excessive tire wear 6. Improve vehicle handling and safety 7. With LCD screen display, easy to read 8. Fit for travelers and drivers product information: Material Type: ABS 1. Weight: about 20 grams 2. Material: ABS 3. Range: 2.0-99.5 PSI, 0.15-7.00 BAR 4. Technical support: lithium battery (included) 5. Size: about 6 * 3.0 * 1.5cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 4cm * 2cm / 2.76inch * 1.57inch * 0.79inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs40HQ: 458 cartons * 500 pcs = 229000 pcs
£1.99
-
CAT-280 2 in 1 Car Battery Charger & Color Screen Battery Tester, EU Plug
1. Built-in various safety protections, reverse polarity protection, temperature protection, leakage protection, etc., safe to use2. Using ABS flame retardant material, not waterproof3. With multiple functions, easy to use and easy to carry4. Features: 2 in 1 battery tester and battery charger5. Main functions: battery charging, battery test, start system test, charging system test, view data, set language6. Suitable for 12V SLI / AGM / EFB / GEL / LiFeP04 battery7. Current (Max): 8A8. Charging voltage: 2-200Ah9. Input voltage: 100VAC-240VAC 15.00V (Max)10. Working temperature: -20 - 50 degrees Celsius11. Electric energy conversion rate: 90%12. Product weight: 0.8KGSpecification: Package Weight One Package Weight 1.00kgs / 2.21lb One Package Size 28cm * 18cm * 7cm / 11.02inch * 7.09inch * 2.76inch Qty per Carton 20 Carton Weight 21.00kgs / 46.30lb Carton Size 58cm * 38cm * 30cm / 22.83inch * 14.96inch * 11.81inch Loading Container 20GP: 403 cartons * 20 pcs = 8060 pcs40HQ: 936 cartons * 20 pcs = 18720 pcs
£45.99
-
KONNWEI KONNWEI KW210 Car Battery Test Battery Capacity Resistance Battery Detector, KW210
feature:1. With the help of STM32 chipset hardware, a fast and smooth running speed is realized.2. Make sure the battery status is (OK) or (Replace).3. Check the battery capacity-cold start current (CCA), DIN, EN and IEC information about the battery rating.4. Check the internal resistance value (m).5. Display life (percentage).6. Battery start test, load test, battery charging test, ripple test.7. Graphical voltage real-time monitoring.8. Storage and review of test results.9. Print the test results and battery report on the PC.10. Support languages: English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.11. Application: used to test various 12V batteries (start (SLI), deep cycle and marine) wet (water injection), VRLA or maintenance-free (MF), sealed maintenance-free (SMF), absorbent glass mat (AGM) , EFB and gel cells.12. Support the main battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC. 13. Measurement standards:CCA: 100-2000.BCI: 100-2000.CA: 100-2000.MCA: 100-2000.JIS: 26A17-24SH52.DIN: 100-1400.IEC: 100-1400.EN: 100-2000.SAE: 100-2000.GB: 100-1400.14. Specifications:Display: color TFT LCD screen.System voltage: 12 volts.Input voltage range: 8V-16VPower requirements: No built-in battery is required.Turn on the power after turning on the power during the test.15. Shipping list:KW210 battery tester unit x1 USB cable for upgrading and printing x1Box x1User manual x1Nylon protective sleeveSpecification: General Certificate CE Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 19cm * 16cm * 6cm / 7.48inch * 6.3inch * 2.36inch Qty per Carton 20 Carton Weight 9.00kgs / 19.84lb Carton Size 40cm * 34cm * 32cm / 15.75inch * 13.39inch * 12.6inch Loading Container 20GP: 612 cartons * 20 pcs = 12240 pcs40HQ: 1422 cartons * 20 pcs = 28440 pcs
£19.99
-
Ancel BST100 12V Car Battery Tester, BST100
1. Voltage: 12V2. Working temperature: -20 - 40 degrees Celsius3. Using STM-32 chipset hardware, the operation speed is fast and the use is smooth.4. The test results are accurate, using high-precision amplifiers, calibrated by professional battery test tools, and the reading accuracy of BST100 is as high as 99%.5. Wide testing range, covering CCA 100-2000, 3-220 AH, the best in the market.6. Support graphical real-time monitoring of battery voltage, which can analyze battery data more accurately.7. Test all lead-acid batteries for automobile starting, including ordinary lead-acid batteries, AGM flat batteries, AGM spiral batteries, gel batteries, etc.8. Polarity reverse protection, reverse polarity will not damage the tester or affect the vehicle and battery.9. Testing standards include most of the current battery standards in the world: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.10. Can test various 12V batteries (Starting [SLI], Deep Cycled and Marine) Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorbent Glass Mat (AGM) ) and GEL EPB battery.Specification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 16cm * 5cm * 18cm / 6.3inch * 1.97inch * 7.09inch Qty per Carton 50 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 40cm * 32cm / 20.47inch * 15.75inch * 12.6inch Loading Container 20GP: 400 cartons * 50 pcs = 20000 pcs40HQ: 930 cartons * 50 pcs = 46500 pcs
£23.99
-
HABOTEST HABOTEST HT607 Portable Handheld Temperature Humidity Tester, HT607
1. Temperature: -20-60 degrees C (-4°F-140°F) / +1.5 degrees C2. Dew point temperature: -50.0-60.0 degrees C (-58.0°F - 140.0°F) / + 1.5 degrees C3. Wet bulb temperature: -20.0-60.0 degrees C (-4.0°F - 140.0°F) / + 1.5 degrees C4. Humidity: 0-100% / +5%5. Battery type: 3x1.5V AAA batteries6. Size: 142x58mm7. Weight: 0.212kg8. Function: support data saving/backlight/automatic shutdown/low battery indication9. Inlet probe sensor, short response time, strong anti-interference ability, more accurate data collection10. Multiple measurement units are displayed, wet bulb point/dew point are optional, and the unit can be switched according to different measurement requirementsNote: Shipment without batterySpecification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 9cm * 18.5cm * 5.5cm / 3.54inch * 7.28inch * 2.17inch Qty per Carton 50 Carton Weight 12.00kgs / 26.46lb Carton Size 42cm * 30cm * 30cm / 16.54inch * 11.81inch * 11.81inch Loading Container 20GP: 705 cartons * 50 pcs = 35250 pcs40HQ: 1637 cartons * 50 pcs = 81850 pcs
£19.99
You have seen 312 out of 569 products