Products
-
RCSTQ For DJI Avata 2 RCSTQ Chassis Armor Carbon Fiber Lightweight Protection Crash Bumper
1. Soft silicone attached to both sides, will not scratch the fuselage, to ensure the safety and stability of landing and takeoff2. Carbon fiber material, corrosion and abrasion resistant, not easy to deform in the long term3. Light and stable, flight is not affected4. Increase ground clearance to avoid the interference of grass, sand and other complex terrain on the sensor, reduce the impact of wind resistance, improve flight stability5. Tie-fastening design, easy to use, in high-speed flight or complex terrain landing can also ensure that the bottom of the armor is stable and does not shift6. Size: about 13.2 x 12.2 x 1cm7. Weight: about 21.1g8. Note: shipped without droneSpecification: General Compatible with DJI: Avata 2 Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 14cm * 2cm / 5.91inch * 5.51inch * 0.79inch Qty per Carton 120 Carton Weight 7.00kgs / 15.43lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 120 pcs = 54000 pcs40HQ: 1045 cartons * 120 pcs = 125400 pcs
£8.99
-
RCSTQ For DJI Avata 2 RCSTQ Colorful Luminous Light Belt High Bright Tube Night Flight Warning Light Strip, For DJI Avata 2
1. Support 3 different brightness level adjustment, you can adjust the use according to their own needs2. High brightness design, can be cut freely3. Applicable to a variety of scenes4. Power supply: button battery included5. Material: silicone6. Note: the delivery does not include the droneSpecification: General Compatible with DJI: Avata 2 Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 9cm * 6cm * 4cm / 3.54inch * 2.36inch * 1.57inch Qty per Carton 210 Carton Weight 11.50kgs / 25.35lb Carton Size 50cm * 38cm * 30cm / 19.69inch * 14.96inch * 11.81inch Loading Container 20GP: 467 cartons * 210 pcs = 98070 pcs40HQ: 1086 cartons * 210 pcs = 228060 pcs
£8.99
-
STARTRC For DJI Avata 2 STARTRC Air-Dropping System Thrower Parabolic, For DJI Avata 2
Features1. Exclusive design. The dedicated dispenser designed for DJI Avata 2 can be controlled by the remote control to rotate in place, so as to drop items; 2. Easy installation. It adopts the double-sided buckle form. You only need to press both sides lightly to open and close it. It can be installed quickly without shaking or falling off, and can be used with confidence; 3. Simple operation. The design is an electronic product type with a USB charging port. There is no need to use an extra controller. The delivery is indirectly completed by controlling the flight rotation of Avata 2. The operation is simple and easy to use; 4. Multifunctional design. The design of the dispenser can be used in multiple functional scenarios such as marriage proposal, document delivery, throwing bait, etc., and the top expansion piece is designed with a gopro female connector, which is suitable for the connection and use of a variety of sports cameras (the connection camera cannot be used together with the dispenser to avoid overload and the risk of bombing). One item can be used in multiple ways. Choose to use it according to your needs to improve your flight experience; 5. Lightweight design. Made of ABS+PC material, it is lightweight and will not cause too much burden during installation. Within the load gram range, it will not affect your flight to a certain extent.Package List1. Parabolic dispenser x 1 2. Screw x 1 3. 1/4 connector x 1 4. Ring x 1 5. Dispensing line x 1 6. Charging line x 1 7. Product manual x 1Specification: Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 10cm * 14cm * 7cm / 3.94inch * 5.51inch * 2.76inch Qty per Carton 100 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 35cm * 30cm / 20.47inch * 13.78inch * 11.81inch Loading Container 20GP: 488 cartons * 100 pcs = 48800 pcs40HQ: 1133 cartons * 100 pcs = 113300 pcs
£17.99
-
STARTRC For DJI Avata 2 STARTRC Battery Quick-release Flying Tail Cover, For DJI Avata 2
1. Designed specifically for DJI Avata 2 drone battery protection, precise mold opening, perfect fit, stability, and firm design, it can protect the Avata 2 battery from being accidentally loosened and scrapped by battery impact, and will not fall off or be lost, reducing losses caused by collisions. 2. This is an aerodynamically designed tail wing that helps the fuselage cut off airflow to reduce air resistance. 3. The bracket not only provides protection during flight, but also provides cushioning during landing to avoid damage caused by high-speed landing. 4. Easy to use, just press the buckle to easily remove the battery. 5. The tail wing is made of ABS+PC lightweight material, weighing only 4.3g, which will not bring additional burden to the flight of Avata 2.Specification: General Compatible with DJI: Avata 2 Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 9cm * 4cm * 3.5cm / 3.54inch * 1.57inch * 1.38inch Qty per Carton 500 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 42cm * 26cm / 18.5inch * 16.54inch * 10.24inch Loading Container 20GP: 519 cartons * 500 pcs = 259500 pcs40HQ: 1206 cartons * 500 pcs = 603000 pcs
£3.99
-
STARTRC For DJI Avata 2 STARTRC Silicone Feet Pad, Silicone Feet Pad
1. Lightweight Experience: Specifically designed for DJI AVATA 2, each foot pad weighs no more than 2.5g, ensuring minimal impact on flight performance due to weight. 2. Premium Material: Made from silicone, the foot pads enhance hardness and ensure a flat installation that does not tilt, maintaining stability for your aircraft. 3. Enhanced Protection: Provides approximately 10mm of additional height, protecting the aircraft from uneven surfaces and preventing wear on the landing gear over time. 4. Easy Installation: Adhesive-backed for simple applicationa??just peel off the backing, align with the circular base of the AVATA propeller, and press firmly to secure. Strong adhesion ensures durability and stability. 5. Carefree Flying: Vibrant orange color enhances aircraft visibility, includes 6 pads with 2 spares for long-term use without worries.Specification: General Compatible with DJI: Avata 2 Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 12cm * 9cm * 1cm / 4.72inch * 3.54inch * 0.39inch Qty per Carton 500 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 42cm * 25cm / 18.5inch * 16.54inch * 9.84inch Loading Container 20GP: 540 cartons * 500 pcs = 270000 pcs40HQ: 1254 cartons * 500 pcs = 627000 pcs
£4.99 £1.99
-
Sunnylife For DJI Avata 2 Sunnylife Drone Anti-Collision Protective Cover, Back Plate, Propeller Ring Stripes, Combo Case Kit
AT2-KC820Features:1. Anti-collision & Anti-damage. The anti-collision TPU stripes Increasing tenacity and make your drone safer.2. Lightweight Design. The protective rings weight only 28g, hardly affects flying endurance.3. Especially Designed for Avata 2. The propellers protectors perfectly fit for Avata 2 and durable to use.Specifications:1. Name: Sunnylife Propeller Guard Protector2. Model: AT2-KC8203. Applicable Models: Dor DJI AVATA 24. Material: TPU5. Net Weight: 28gAT2-P821Features:1. Anti-scratch under Turtle Mode. The protective plate prevents Avata 2 from scratch and bumps under turtle mode.2. Bump-proof Hard Material. The protective plate can effectively relieve shock force and protect drone.3. Sturdy & Lightweight. The protector is only 10g, which will not increase much burden on drone.4. Locked by Screws & Stable Installation.Specifications:1. Name: Sunnylife Protective Plate2. Applicable Models: Avata 23. Model: AT2-P8214. Material: PlasticSpecification: General Compatible with DJI: Avata 2 Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 11cm * 1cm / 5.91inch * 4.33inch * 0.39inch Qty per Carton 200 Carton Weight 6.00kgs / 13.23lb Carton Size 45cm * 22cm * 32cm / 17.72inch * 8.66inch * 12.6inch Loading Container 20GP: 841 cartons * 200 pcs = 168200 pcs40HQ: 1954 cartons * 200 pcs = 390800 pcs
£3.99 - £9.99
-
DJI For DJI Avata 360 Original Charging Hub, Charging Hub
1. Supports charging three batteries at the same time. (Parallel charging requires the 65W Portable Charger or 100W USB-C Power Adapter. With an input of 65 W or higher, the hub supports parallel charging. Otherwise, it charges sequentially, prioritizing the highest battery level.)2. Compatibility: For DJI Avata 360 Intelligent Flight Battery3. Operating Temperature: 5-40 degrees Celsius (41-104 degrees Fahrenheit)4. Input: 5-20 V, max 5 A5. Output (Power Accumulation): Max 60 W6. Output (Charging): Max 17.2 V7. Output (USB): 30 W8. Tips: The charger is not included.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 90 Carton Weight 11.80kgs / 26.01lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 90 pcs = 37080 pcs40HQ: 958 cartons * 90 pcs = 86220 pcs
£55.99
-
For DJI Avata Battery Anti-release Buckle Wear-resistant Battery Protection Buckle, For DJI Avata Battery Anti-release Buckle
1. Applicable models: suitable for DJI Avata drone2. Light weight, does not affect the flight of the aircraft. Does not affect the storage of the machine.3. Buckle is not easy to loosen, can prevent the battery from falling off in flight.4. Fitted with drone body design, the body will not be damaged during installation and removal.5. Main material: ABS materialSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 500 Carton Weight 14.00kgs / 30.86lb Carton Size 30cm * 50cm * 36.7cm / 11.81inch * 19.69inch * 14.45inch Loading Container 20GP: 484 cartons * 500 pcs = 242000 pcs40HQ: 1124 cartons * 500 pcs = 562000 pcs
£4.99 £1.99
-
For DJI Avata CQT 2 In 1 Battery Anti-Falling Decorative Rear Wing Buckle Battery, 913491
1. Adopting dynamic design, the empennage can help the fuselage cut airflow and reduce air resistance2. Two-in-one design of tail fin + battery buckle, which can be combined and detached3. Tail+battery anti-disengagement buckle is only 7.7 grams, no sense of weight, does not affect flight4. Do not cover the battery switch and power status5. Material: PLA6. Features: Airflow cutting, battery anti-falling, quick disassembly7. Product size: 7 x 7 x 2.8 cm8. Product weight: 7.7 grams9. Note: Only the rear wing buckle will be shipped, no others!Specification: General Compatible with DJI: Avata Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 7cm * 6cm * 3cm / 2.76inch * 2.36inch * 1.18inch Qty per Carton 500 Carton Weight 9.00kgs / 19.84lb Carton Size 55cm * 47cm * 23cm / 21.65inch * 18.5inch * 9.06inch Loading Container 20GP: 448 cartons * 500 pcs = 224000 pcs40HQ: 1041 cartons * 500 pcs = 520500 pcs
£4.99 £2.99
-
For DJI Avata CQT Upper Expansion Adapter Sports Camera Bracket, For DJI Avata
1. It can be connected with GoPro action camera series, POCKET 2/1, INSTA360 action camera series, Fimi Palm 2/1, OSMO ACTION, searchlight, fill light, with 1/4 adapter, it can be matched with more action cameras and searchlight light2. GoPro interface, front and rear can be adjusted freely, dont worry about the body entering the mirror and affecting the picture3. The inner lining is equipped with a sponge pad to prevent scratches on the fuselage4. The extended card position is closed, and the installation is more stable5. Screw fixed, fit the fuselage6. Product size: 6.1 x 6.1 x 3 cm7. Product net weight: 28.8 gramsSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 7cm * 6cm * 4cm / 2.76inch * 2.36inch * 1.57inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 55cm * 47cm * 31cm / 21.65inch * 18.5inch * 12.2inch Loading Container 20GP: 332 cartons * 500 pcs = 166000 pcs40HQ: 772 cartons * 500 pcs = 386000 pcs
£2.99
-
For DJI Avata PULUZ 2pcs Tempered Glass Drone Lens Film, For DJI Avata
About The Product1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.Package List1. Tempered Glass Film x 2 2. Adhesive x 2 3. Lens Cloth x 2 4. Wet & Dry Wipes x 2Specification: General Compatible with DJI: Avata Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 14cm * 8cm * 1cm / 5.51inch * 3.15inch * 0.39inch Qty per Carton 200 Carton Weight 2.20kgs / 4.85lb Carton Size 42cm * 30cm * 22cm / 16.54inch * 11.81inch * 8.66inch Loading Container 20GP: 962 cartons * 200 pcs = 192400 pcs40HQ: 2233 cartons * 200 pcs = 446600 pcs
£0.99
-
RCSTQ For DJI Flip RCSTQ Lens Hoods Dual Purpose Lens Cover, Lens Cover
1. Effectively block lateral stray light, reduce light spots and ghosting caused by sunlight, and improve the contrast of backlit/strong light environment imaging2. Real machine mold opening, does not affect the storage and use of filters3. Full surround design, can effectively block light and protect the lens4. Lightweight and durable, while blocking light, it does not affect the stable flight of the drone5. Material: ABS, PC6. Weight: about 8.9g7. Size: about 5.5 x 4.8 x 6.1cm8. Note: the drone in the picture is not included in the shipmentSpecification: General Compatible with DJI: Flip Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 7cm * 6cm / 3.15inch * 2.76inch * 2.36inch Qty per Carton 160 Carton Weight 5.80kgs / 12.79lb Carton Size 50cm * 37cm * 34cm / 19.69inch * 14.57inch * 13.39inch Loading Container 20GP: 423 cartons * 160 pcs = 67680 pcs40HQ: 984 cartons * 160 pcs = 157440 pcs
£2.99
-
CZI For DJI M400 / M350 / M300 CZI MP130 Pro Digital Voice Broadcasting System Drone Shouting, MP130 Pro
1. Shouting mode: real-time shouting, recorded broadcasting, TTS text broadcasting, audio files2. Warning light mode: red and blue burst flash, red burst flash, blue burst flash, yellow burst flash, green burst flash3. Other functions: pickup feedback4. Protection grade: IP545. Operating temperature: -20 to 50 degrees Celsius6. Total power: <68W 7. Sound Pressure: 130dB 1m8. Effective broadcasting distance: >700m 9. Installation: adapter ring 10. Communication link: drone link, USB & serial link, LTE link (no LTE for overseas version)11. Material: PP/(ABS+PC)/Aluminum alloy12. Overall dimensions: about 14.62 x 13.95 x 9.92cm13. Weight: about 595gFeatures:1. High-pitched horn, strong penetration, listening distance in the car can reach more than 200m2. 5 broadcasting methods, flexible to deal with a variety of scenarios, cell phone APP can complete all the operations of the MP130 Pro, no matter what kind of way can easily get started3. Multi-color warning light: the use of horn to increase the area of the warning light, 2000m visible at night4. Broadcasting monitoring: can feedback the broadcasting status from a distance5. Intelligent temperature control: built-in temperature sensor, according to the ambient temperature automatically match powerSpecification: Package Weight One Package Weight 2.15kgs / 4.75lb One Package Size 29cm * 26cm * 18cm / 11.42inch * 10.24inch * 7.09inch Qty per Carton 2 Carton Weight 5.00kgs / 11.02lb Carton Size 38cm * 31cm * 28cm / 14.96inch * 12.2inch * 11.02inch Loading Container 20GP: 808 cartons * 2 pcs = 1616 pcs40HQ: 1876 cartons * 2 pcs = 3752 pcs
£1,109.99
-
CZI For DJI Mavic 3E / 3T CZI GL10V2 Drone Dual Axis Gimbal Searchlight, GL10V2
1. Electrical interface: compatible with DJI PSDK 2. Total power: 36W 3. White LED power: 30W4. Red / blue / yellow LED power: 2W5. Supply voltage: 15V6. Luminous flux: 3200Im +/-3% 7. FOV: 14 degrees8. Searching distance: 100/75/50m9. Spot diameter: 24/18/12m10. Searching area: 422.5/237.6/105.6 square meters11. Center illuminance: 6.4/11.5/26.3Lux12. Basic functions: white light night fill light, red, blue and yellow multicolor flash, green laser direction guidance, PTZ AI algorithm automatic adjustment 13. Controllable rotation range of the head: pitch -100 degrees to 60 degrees14. Operating temperature: -20 to 50 degrees Celsius15. Size: about 6.8 x 14 x 5.5cm16. Weight: about 130gFeatures:1. Luminous area expansion, double aspherical lens support, light effect upgrade2. AI-enhanced, intelligent light pursuit3. High frequency strong light deterrent in burst flash mode, rapid control of the scene in times of emergency4. Four-color burst flash to meet the needs of multi-scene light instructions5. Through the Pilot2 APP, one key to adjust the brightness, switch modes and adjust the angle, easy to operate6. Quick-detachable structure design, easy to install7. Built-in temperature control algorithm, to avoid overheating and loss of equipment, to ensure stable operation8. Covering a wide range of application scenarios, ensuring a clear vision at night for law enforcement and emergency response unitsSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 16cm * 10cm * 8cm / 6.3inch * 3.94inch * 3.15inch Qty per Carton 36 Carton Weight 8.20kgs / 18.08lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 36 pcs = 17640 pcs40HQ: 1137 cartons * 36 pcs = 40932 pcs
£447.99
-
BRDRC For DJI Mavic Air 2 / Air 2S Air-Dropping System Thrower Parabolic, For DJI Mavic Air 2 / Air 2S
1. Applicable to Air 2S/ Air 2 drones; 2. Can be delivered remotely, used for advertising, throwing bait, throwing gifts, delivering meals, sending wedding rings, etc.; 3. Lightweight and safe, it will not increase the burden on the drone or damage the drone, and is easy to install and disassemble; 4. The bottom is equipped with a tripod, which does not affect the propeller and sensor. 5. The front landing gear is increased by 31mm, and the rear landing gear is increased by 28mm, which can prevent the ground debris from dirtying the fuselage or damaging the gimbal during takeoff and landing, and it can still take off and land on uneven ground. 6. Main material: ABS 7. Net weight: 62.9g 8. Size: 9.2 x 8 x 2.8cm (thrower), 6.1 x 2.1 x 1.2cm (rear landing gear), 5 x 1.7 x 1.5cm (front landing gear) Packing list: 1. Thrower x 1 2. Heightening bracket (set) x 1 3. Lifting ring x 1 4. Foot pad x 1Specification: General Compatible with DJI: Air 2S, Mavic Air 2 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 12cm * 10cm * 7cm / 4.72inch * 3.94inch * 2.76inch Qty per Carton 100 Carton Weight 14.00kgs / 30.86lb Carton Size 52cm * 35cm * 25cm / 20.47inch * 13.78inch * 9.84inch Loading Container 20GP: 586 cartons * 100 pcs = 58600 pcs40HQ: 1360 cartons * 100 pcs = 136000 pcs
£17.99
-
BRDRC For DJI Mavic Pro Air-Dropping System Thrower Parabolic, For DJI Mavic Pro
1. Suitable for DJI Mavic Pro drones; 2. Can be delivered remotely, used for advertising, throwing bait, throwing gifts, delivering meals, sending wedding rings, etc.; 3. USB charging, quick release, one-button control with DJI remote controller; 4. Lightweight and safe, will not increase the burden on the drone or damage it, easy to install and disassemble; 5. The tripod is installed at the bottom, which does not affect the propellers and sensors! Parameters: 1. Maximum load: 500g 2. Built-in battery capacity: 150 mAh 3. Standby time: about 12 hours 4. Can be opened after one charge: about 500 times 5. Self-charging time: 1.5 hours Other parameters: 1. Main material: ABS 2. Product size: 10 x 8.5x5.5cm 3. Net weight: 82g 4. Packing list: Thrower x 1 Heightening rack (set) x 1 Rubber band x 1 Bandage x 2 Photosensitive sensor connection cable x 1 Thrower USB charging cable x 1 Throwing hanging ring x 1Specification: General Compatible with DJI: Mavic Pro Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 12cm * 11cm * 7cm / 4.72inch * 4.33inch * 2.76inch Qty per Carton 100 Carton Weight 13.80kgs / 30.42lb Carton Size 52cm * 35cm * 25cm / 20.47inch * 13.78inch * 9.84inch Loading Container 20GP: 586 cartons * 100 pcs = 58600 pcs40HQ: 1360 cartons * 100 pcs = 136000 pcs
£17.99
-
BRDRC For DJI Mini 2 / Mavic Mini Air-Dropping System Thrower Parabolic, For DJI Mini 2 / Mavic Mini
1. Suitable for Mini 2 / Mavic Mini drones, can be remotely dispatched for advertising, throwing bait, throwing gifts, delivering meals, sending wedding rings, etc.; 2. Mini and easy to throw, allowing you to show more possibilities; 3. USB charging, quick release, one-button control of the remote control; 4. The installed weight is about 54g, light and safe; the integrated fuselage design will not increase the burden on the drone, nor will it damage the drone, so you can enjoy airdropping gifts; 5. The bottom landing gear is effectively increased by 3cm, and it can still take off and land in an uneven ground environment, effectively protecting the safety of the fuselage. Important parameters: 1. MAX load: 100g 2. Built-in battery capacity: 150 mAh 3. Standby time: about 12 hours 4. Charging time: 1.5 hours 5. Remote control distance: 100 meters 6. Charging interface: Type-C Other parameters: 1. Main material: plastic 2. Product size: 8.6 x 6.2 x 3.5cm (thrower), 3.8 x 5.8 x 1.5cm (remote control) 3. Net weight: 79g Packing list: 1. Thrower x 1 2. Remote control x 1 3. Heightened landing gear (set) x 1 4. Thrower charging cable x 1Specification: General Compatible with DJI: Mini 2, Mavic Mini Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 12cm * 9cm * 6cm / 4.72inch * 3.54inch * 2.36inch Qty per Carton 100 Carton Weight 14.80kgs / 32.63lb Carton Size 47cm * 32cm * 25cm / 18.5inch * 12.6inch * 9.84inch Loading Container 20GP: 709 cartons * 100 pcs = 70900 pcs40HQ: 1646 cartons * 100 pcs = 164600 pcs
£23.99
-
For DJI Mini 3 Pro Remote Control Explosion-proof Tempered Glass Screen Film, For DJI Mini 3 Pro Remote Control
1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.Specification: General Compatible with DJI: Mini 3 Pro Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 18cm * 10cm * 1cm / 7.09inch * 3.94inch * 0.39inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 37cm * 22cm / 20.47inch * 14.57inch * 8.66inch Loading Container 20GP: 630 cartons * 200 pcs = 126000 pcs40HQ: 1462 cartons * 200 pcs = 292400 pcs
£0.99
-
For DJI Mini 4 PRO / Mini 3 PRO / Mini 3 Upper Expansion Bracket 1/4 Screws for Tripod Accessories, For DJI Mini 4 PRO / Mini 3 PRO / Mini 3
1. The inside of the bracket is smooth and flat, preventing scratches on the body and making it safe to use2. With 1/4 adapter screw, compatible with more devices3. Connect the tripod (not included) can be used as a handheld stand to meet different needs4. The bottom of the stand does not touch the ground, does not affect the takeoff and landing, and has a certain safety distance from the ground, to protect the machine from injury5. Lightweight and portable, flight safety, does not affect the endurance6. Fits the fuselage, not easy to shake, stable shooting picture7. Multiple mounting methods, wide range of uses, to meet different combinations8. Environmentally friendly and high toughness material, not easy to break.9. After installation, it can be folded without disassembling, no need to disassemble every time you store it10. Suitable for DJI Mini 4 PRO / Mini 3 PRO / Mini 3 11. Weight: about 22.5g12. Size: about 7.5 x 6.5 x 2.7cm13. Note: shipment only includes the stand, not including the demo drone, lights and camera, etc.Specification: General Compatible with DJI: Mini 4 Pro, Mini 3, Mini 3 Pro Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 19cm * 13cm * 3cm / 7.48inch * 5.12inch * 1.18inch Qty per Carton 60 Carton Weight 3.50kgs / 7.72lb Carton Size 50cm * 38cm * 28cm / 19.69inch * 14.96inch * 11.02inch Loading Container 20GP: 501 cartons * 60 pcs = 30060 pcs40HQ: 1163 cartons * 60 pcs = 69780 pcs
£2.99
-
BRDRC For DJI Mini 4 Pro Drone BRDRC Landing Gear Increased Height Leg
1. Heightened landing gear for Mini 4 Pro, effectively increasing the fuselage by 14mm to prevent ground debris from contaminating the fuselage and sensors during takeoff and landing.2. It can still take off and land on uneven ground, effectively protecting the safety of the fuselage;3. Light weight does not affect flight, triangular structure design, stable and not easy to fall off;4. Quick-release design, easy to install and remove.5. Main material: ABS6. Net weight: 20g7. Product size: 7 x 2.3 x 1.8cm (front feet), 5.1 x 4.6 x 2.5cm (rear feet)Packing list:Nose landing gear x 2Rear landing gear x 2Specification: General Compatible with DJI: Mini 4 Pro Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 90 Carton Weight 3.17kgs / 6.99lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 90 pcs = 49860 pcs40HQ: 1286 cartons * 90 pcs = 115740 pcs
£2.99
-
STARTRC For DJI Mini 4 Pro STARTRC Folding Anti-fall Anti-dirt Heightened Landing Gear Training Rack, For DJI Mini 4 Pro
Features1. Made of high quality ABS material, durable and sturdy 2. Suitable for DJI Mini 4 Pro 3. Small size and lightweight, only 13g, without any impact on flight performance 4. Effective protect camera when quadcopter need landing on rough ground outdoor 5. Effectively raise 20mm to avoid ground debris from contaminating the body and damaging the gimbal during take-off and landing 6. Non-destructive quick disassembly design, simple disassembly, no need to worry about damaging the fuselage. 7. Note: drone and its Accessories are not included in packageSpecifications1. Material: ABS+PC 2. Size: 10.3*9*4.4cm 3. Weight: 13gSpecification: General Compatible with DJI: Mini 4 Pro Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 11cm * 6cm * 2.5cm / 4.33inch * 2.36inch * 0.98inch Qty per Carton 200 Carton Weight 6.60kgs / 14.55lb Carton Size 45cm * 32cm * 27cm / 17.72inch * 12.6inch * 10.63inch Loading Container 20GP: 685 cartons * 200 pcs = 137000 pcs40HQ: 1592 cartons * 200 pcs = 318400 pcs
£3.99
-
STARTRC For DJI Mini 4 Pro STARTRC Night Navigation Searchlight LED Flashlight Rechargeable Refill Lighting Signal Light, For DJI Mini 4 Pro
1. Exclusive design. Designed for DJI Mini 4 pro, the drone searchlight has independent and detachable lights on both sides, which can be used for drone night flight, will not interfere with signals, and will not affect flight use; 2. High-quality materials. Made of ABS material, it is smooth and burr-free, sturdy and durable, and weighs only about 52g overall. The assembly will not affect the flight of the aircraft to a certain extent. The silicone gasket on the fuselage prevents mutual friction and effectively reduces shock; 3. Three modes. Three adjustment modes, you can adjust them at will tomorrow night, and the third one is SOS mode, which can cope with outdoor emergency measures. The USB charging port can be charged at any time. It can last for two hours when fully charged, which can basically meet the needs of night flight; 4. Multi-angle adjustment. The lights on both sides can rotate 360 a??a??degrees, and the rotation of the two sides does not interfere with each other. They can be illuminated according to needs, and the angle can be adjusted at will and can be fixed, and adjusted according to needs; 5. Easy to use. The single-sided snap-on switch fits the Mini 4 pro design at the bottom, which is very fixed, quick to install and disassemble, will not shake, and is not easy to fall, protecting your night drone flight;Specification: General Compatible with DJI: Mini 4 Pro Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 18cm * 10cm * 3cm / 7.09inch * 3.94inch * 1.18inch Qty per Carton 100 Carton Weight 11.80kgs / 26.01lb Carton Size 52cm * 32cm * 20cm / 20.47inch * 12.6inch * 7.87inch Loading Container 20GP: 801 cartons * 100 pcs = 80100 pcs40HQ: 1860 cartons * 100 pcs = 186000 pcs
£17.99
-
Sunnylife For DJI Mini 4 Pro Sunnylife N4P-KC712 Drone Propeller Protective Guard Anti-collision Ring, For DJI Mini 4 Pro
1. Follow the principles of material mechanics and have a super impact-resistant structure. After precise calculations and repeated testing, this lightweight, anti-collision and impact-resistant anti-collision ring was developed. 2. Multi-arch structure, collision and impact resistance, anti-collision upgrade is safer. 3. Connected end to end, stable and anti-shake. The front and rear rings are connected and integrated to reduce resonance and make it more stable. 4. Snap-on structure, easy and quick to install and disassemble. 5. Isolate the propeller blades to protect the propeller and prevent the propeller from scratching people or objects to a large extent. 6. Can be used with Sunnylife LG700 spider tripod. 7. Material: Plastic 8. Net weight: 46gSpecification: General Compatible with DJI: Mini 4 Pro Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 18cm * 15cm * 5cm / 7.09inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 5.00kgs / 11.02lb Carton Size 52cm * 32cm * 37cm / 20.47inch * 12.6inch * 14.57inch Loading Container 20GP: 433 cartons * 40 pcs = 17320 pcs40HQ: 1005 cartons * 40 pcs = 40200 pcs
£5.99
-
STARTRC For DJI Mini 4 STARTRC Drone Propeller Protective Guard Anti-collision Ring, For DJI Mini 4 Pro
Features1. The durable propeller protective cover specially designed for DJI Mini 4 Pro will not affect the normal flight of the drone and will not block the arm indicator lights. 2. The enclosed isolation structure protects the blades and prevents them from scratching people or objects, making the flight safer. 3. Made of high-quality ABS material, it has high strength and good toughness, which can effectively buffer the impact force and provide protection for the drone during flight. 4. Snap-on design allows for quick assembly and disassembly without scratching the drone body. 5. Split design, can be split into 4 parts for easy storage and portability. 6. Size: Front 19.9x11.8x3.4cm; Rear: 20.1x11.6x4.2cmPackage List1. Propeller Protector Ring No. 1 x 1 2. Propeller Protector Ring No. 2 x 1 3. Oar protection ring No. 3 x 1 4. Propeller Protector Ring No. 4 x 1 5. Color box x 1 6. Instruction manual x 1Specification: General Compatible with DJI: Mini 4 Pro Package Weight One Package Weight 0.14kgs / 0.31lb One Package Size 18cm * 14cm * 5.5cm / 7.09inch * 5.51inch * 2.17inch Qty per Carton 40 Carton Weight 6.00kgs / 13.23lb Carton Size 56cm * 30cm * 37cm / 22.05inch * 11.81inch * 14.57inch Loading Container 20GP: 429 cartons * 40 pcs = 17160 pcs40HQ: 995 cartons * 40 pcs = 39800 pcs
£5.99
You have seen 72 out of 395 products