Products
-
WAVESHARE Waveshare PL2303 USB To UART (TTL) Communication Module V2
Features1. Adopt PL2303GS new version device 2. Support windows XP/7/8/10/11/... 3. 3x VCCIO power mode via jumper setting: - VCCIO - 5V: 5V output - VCCIO - 3.3V: 3.3V output 4. Open the jumper: powered from target board (1.8V/2.5V/3.3V/5V) 5. 3x LED indicators: TXD, RXD, PWRPackage List1. PL2303 USB UART Board (type A) V2 x1 2. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 500 pcs = 283000 pcs40HQ: 1314 cartons * 500 pcs = 657000 pcs
£2.99
-
WAVESHARE Waveshare PoE UPS Base Board for Raspberry Pi CM4, Gigabit Ethernet, Dual HDMI, Quad USB2.0, PoE UPS Base Board
Features1. PoE UPS Base For CM4: Uninterruptible power supply, powering the CM4 while recharging 2. Connecting With Compute Module 4: Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header. Suitable For Compute Module 4 Lite/EMMC Series Module 3. Uninterruptible Power: It is able to charge the batteries and provide power output for the system at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble 4. Multi Power Supply Options: - Three external power supply options: USB interface, wide voltage DC, and PoE - When connected to the external power supply, the system will be powered and the battery will be charged at the same time, and the battery will be in a disconnected status after being fully charged, so as to avoid battery life damaging caused by frequently charging and discharging - When the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure system normal operation - When the external power supply is connected, the system will keep running normally even when the battery fails or is taken out. When the external power supply is disconnected, it will automatically switch over to batteries output without interrupting the system operation 5. Safe And Stable Circuit Design: Protection circuits for over charge/discharge, over current, short circuit, and reverse-proof along with the standalone resettable fuse for each battery, more safe and stable 6. Real Time Monitoring: Monitoring the batteries voltage, current, power, and remaining capacity via I2C. (When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss) Note: The 18650 batteries are not includedSpecifications1. CM4 socket: Suitable for all variants of Compute Module 4 2. Battery support: Parallel 18650 Li-ion battery x 3 (NOT included) 3. Networking: Gigabit Ethernet RJ45 connector, integrates 802.3af-compliant PoE circuit (5V/2.5A) 4. USB: USB 2.0 Type A ?? 4 5. Connector: - Raspberry Pi 40PIN GPIO header - M.2 M KEY slot, for connecting NVME SSD, or communication module with PCIE M.2 M KEY interface 6. Display: MIPI DSI port x 1 (22pin 0.5mm FPC connector) 7. Camera: MIPI CSI-2 port x 2 (22pin 0.5mm FPC connector) 8. Video: HDMI x 2, supports 4K 30fps output 9. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 10. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 11. Fan: Allows speed adjustment and measurement, 5V / 12V 12. Indicator: - M.2 status LED - CM4 status LED 13. Power input7-36V 14. Dimensions: 175.0 x 108.0mmSpecification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 35cm * 37cm / 20.47inch * 13.78inch * 14.57inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs40HQ: 919 cartons * 100 pcs = 91900 pcs
£46.99
-
WAVESHARE Waveshare Rail-Mount Serial Server RS485 to WIFI/Ethernet Module, Modbus MQTT Gateway, 21968
FeaturesThis is a RS485 device data acquisitor / IoT gateway designed for industrial environment. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to HTTPD Client, etc. With RS485, WIFI and Ethernet ports, the module can realize functions such as serial to WIFI, serial to Ethernet, Ethernet to WIFI and so on. Using screw terminals for power input, it supports 5~36V wide range power supply. Rail-mount V0 flame-retardant case design, small in size, easy to install. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring...SpecificationsOutline: 1. Communication interface: RS485, screw terminal 2. Power supply: 5 ~ 36V DC, screw terminal 3. Case: PC + ABS, V0 flame retardant grade 4. Dimensions: L x W x H: 109.66 x 28 x 64.71 mm Comunication: 1. Ethernet: 10 / 100M auto-negotiation RJ45 connector 2. WIFI: 802.11b/g/n compliant 3. Serial port: RS485 interface (Anti-surge, Lightningproof, Over-current protection) Wireless specification: 1. Frequency Band: 2.412 ~ 2.484 GHz 2. Wireless network: Station / AP / AP+Station Mode 3. Security mechanism: WPA-PSK / WPA2-PSK 4. Encryption type: TKIP / AES 5. Transmitting power: - 802.11b: +19dBm (11Mbps) - 802.11g: +18dBm (54Mbps) - 802.11n: +17dBm (HT20, MCS7); +17dBm (HT40, MCS7) 6. Receiving sensitivity: - 802.11b: -89dBm (11Mbps) - 802.11g: -81dBm (54Mbps) - 802.11n: -73dBm (HT20, MCS7); -71dBm (HT40, MCS7) Serial specification: 1. Baudrate: 300 ~ 460800 bps 2. Parity bit: None, odd, even, mark, space 3. Data bit: 5 ~ 9 bits 4. Flow control: N/A Software 1.Protocol: TCP / UDP / ARP / ICMP / DHCP / DNS / HTTP / MQTT 2. Configuration: Host, web browser, serial AT command 3. Communication method: TCP/IP direct communication, VCOM 4. Operating mode: Transparent transmission, serial command, HTTPD Client, Modbus TCP to Modbus RTU Environmental requirements 1. Working temperature: -40 ~ 85 degree C 2. Storage temperature: -45 ~ 125 degree C 3. Humidity range: 5% ~ 95% relative humidityPackage List1. RS485 TO WIFI/ETH x 1 2. Antenna x 1Specification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15cm * 8cm * 5cm / 5.91inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 17.00kgs / 37.48lb Carton Size 42cm * 50cm * 32cm / 16.54inch * 19.69inch * 12.6inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs40HQ: 921 cartons * 100 pcs = 92100 pcs
£31.99
-
Waveshare Waveshare Raspberry Pi Camera Module, Embedded IR-CUT, Supports Night Vision, Type B
Features1. Raspberry Pi camera, supports all revisions of the Pi2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight3. Comes with infrared LED, supports night vision4. 5 megapixel OV5647 sensor5. Adjustable focus distance6. Camera specifications- CCD size: 1/4 inch- Aperture (F): 1.2- Focal Length: 8mm- Angle of View (diagonal): 40 degree- Sensor best resolution: 1080p7. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting infrared LED and/or fill flash LED8. Dimension: 31mm x32mmNote: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableNote: The actual image pixels is 5MP, which depends on the sensor, so it doesnt matter that there is a 3MP silk mark on the camera.Package Contents1. RPi IR-CUT Camera (B) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1Specification: Package Weight One Package Weight 0.07kgs / 0.14lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 36cm * 36cm * 40cm / 14.17inch * 14.17inch * 15.75inch Loading Container 20GP: 514 cartons * 720 pcs = 370080 pcs40HQ: 1194 cartons * 720 pcs = 859680 pcs
£19.99
-
WAVESHARE WAVESHARE Raspberry Pi Original Pi5 PCIe to M.2 Interface Expansion Board Compact Version
1. This product features a compact layout design, allowing space for the built-in cooling fan of the Raspberry Pi 5 official case when connecting a 2230 size M-key M.2 peripheral to the Raspberry Pi 5.2. Supports NVMe protocol M.2 interface hard drives, offering high-speed reading and writing for high work efficiency.3. PCI-E ×1 Gen2 or Gen3 mode.4. Only supports Raspberry Pi 5B and 2230 size M.2 hard drives.5. Onboard work indicator lights: PWR is always on when powered, ACT flashes during reading and writing, providing a clear indication of the working status.6. HAT+ design with onboard EEPROM chip.7. Extends the single-channel PCIe 2.0 interface of the Raspberry Pi 5 (speed approximately 500MB/s).8. Supports M.2 M-key devices, only supporting 2230 size M.2 hard drives.9. Provides 3A current to the connected M.2 hard drive.10. Complies with Raspberry Pi HAT+ specifications and can be automatically detected via firmware.11. Compact layout design allows installation between the Raspberry Pi USB ports and the built-in cooling fan and case cover, improving compatibility with the Raspberry Pi 5 official case.12. Onboard LED indicators for power and ACT status.13. Designed specifically for stacking with the built-in cooling fan of the Raspberry Pi 5 official case.14. Dimensions: 65x56.5mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 192 Carton Weight 14.60kgs / 32.19lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 192 pcs = 88512 pcs40HQ: 1071 cartons * 192 pcs = 205632 pcs
£21.99
-
WAVESHARE Waveshare Raspberry Pi PoE+ HAT Ethernet Expansion Board for Raspberry Pi 3B+/4B
Product Overview1. The Raspberry Pi PoE+ HAT is a Power Over Ethernet (PoE+) accessory for the Raspberry Pi 3B+/4B. Compared to its predecessor Raspberry Pi PoE HAT, it features better cooling effect, implementing the 802.3af/at standard with 5V DC/4A larger power output, providing enough power for both Raspberry Pi 3B+/4B at max load and other peripherals at the same time. 2. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.Specification1. PoE standard: 802.3af/at 2. Input voltage: 37-57 V DC, Class 4 device 3. Output voltage/current: 5V DC/4A 4. Current sense: Yes 5. Transformer design: Planar 6. Fan: Controllable brushless cooling fan, delivering 2.2 CFM for processor cooling 7. Fan size: 25 x 25mm 8. Feature: Fully isolated switched-mode power supply 9. Compatible with: Raspberry Pi 3B+/4BPackage List1. Raspberry Pi PoE+ HAT x1 2. Standoffs pack x1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£33.99
-
WAVESHARE Waveshare Raspberry Pi Zero 2W To 3B Adapter for Raspberry Pi 3 Model B/B+, Pi Zero 2W To 3B
1. Using pogo pin connection, the Zero 2W can be easily attached 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. Onboard headphone jack(extended from USB) and an additional speaker header 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptive 6. Not compatible with the first generation Zero Package List: 1. Zero-to-Pi3-Adapter (B) x 1 2. HD-MI Adapter x 1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 4cm / 5.91inch * 4.72inch * 1.57inch Qty per Carton 100 Carton Weight 6.50kgs / 14.33lb Carton Size 42cm * 52cm * 32cm / 16.54inch * 20.47inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs40HQ: 885 cartons * 100 pcs = 88500 pcs
£16.99
-
WAVESHARE Waveshare Raspberry Pi Zero To 3B Adapter for Raspberry Pi 3 Model B/B+, Pi Zero To 3B
1. Zero can be easily attached via specially designed connectors 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. The same GPIO header height as 3B, easily connecting with 3B series HATs or development projects 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptiveSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 52cm * 32cm / 16.54inch * 20.47inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs40HQ: 885 cartons * 200 pcs = 177000 pcs
£13.99
-
Waveshare Waveshare Raspberry Zero V1.3 Mini Camera Module
1. Raspberry Pi Camera, supports only Raspberry Pi Zero V1.3 and Raspberry Pi Zero W2. 5 megapixel OV5647 sensor3. Camera specifications- CCD size : 1/4inch- Focal Length : 3.51mm- Angle of View (diagonal) : 69.1 degree- Sensor best resolution : 1080p4. 2592 × 1944 still picture resolution5. Support 1080p30fps, 720p60fps and 640x480p60/90fps video record6. Dimension: 60mm × 11.5mm × 5mmSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 2cm * 1cm / 3.15inch * 0.79inch * 0.39inch Qty per Carton 5600 Carton Weight 145.60kgs / 320.99lb Carton Size 56cm * 40cm * 40cm / 22.05inch * 15.75inch * 15.75inch Loading Container 20GP: 297 cartons * 5600 pcs = 1663200 pcs40HQ: 690 cartons * 5600 pcs = 3864000 pcs
£9.99
-
Waveshare Waveshare RGB Full-color LED Matrix Panel, 2.5mm Pitch, 64x32 Pixels, Adjustable Brightness, 23707, 23707
1. Pixel: 64 x 32=2048 dots2. Pitch: 2.5mm3. Pixel format: 1R1G1B4. Viewing angle: greater than 140 degrees5. Control mode: synchronous6. Drive: 1/16 scan7. Connector: HUB758. Power supply: V / 2.5A (VH4 connector input)9. Power: within 12W10. Size: 16 x 8cmFeatures:1. 2048 independent RGB led, full color display, adjustable brightness2. 64x32 pixels, 2.5mm pitch, allows displaying text, color images or animations 3. 160x80mm size, moderate size, suitable for DIY desktop display or wall mount display4. Two HUB75 headers on board, 1 for controller data input, 1 output, chain support5. Provide open source development resources (for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino, etc.)Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 20cm * 10cm * 2cm / 7.87inch * 3.94inch * 0.79inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs
£16.99
-
Waveshare Waveshare Rotation Sensor, Rotation
OverviewDetects clockwise/anti-clockwise rotations: degrees and lapsSpecifications1. Pulses per lap: 152. Power: 3.0V ~ 5.3V3. Dimension: 32.1mm * 15.4mm4. Mounting holes size: 2.0mmApplicationsPositioning in Industrial ControlsHow to UseIn the case of working with a MCU:1. VCC -- 3.0V ~ 5.3V2. GND -- Power supply ground3. SW -- MCU.IO (encoder button status)4. SIB -- MCU.IO (output status)5. SIA -- MCU.IO (output status)Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 2cm * 1cm / 1.97inch * 0.79inch * 0.39inch Qty per Carton 9600 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 9600 pcs = 2659200 pcs40HQ: 644 cartons * 9600 pcs = 6182400 pcs
£2.99
-
WAVESHARE Waveshare RP2040-LCD-0.96 Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader, RP2040-LCD-0.96
RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi RP2040 microcontroller chip, as same as on Raspberry Pi Pico. For software development, either Raspberry Pi C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly. In additional, there are also onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. 0.96 inch 160x80 pixels 65K colorful IPS LCD display 6. Lithium battery recharge/discharge header, suitable for mobile devices 7. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 8. Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components) 9. USB 1.1 with device and host support 10. Low-power sleep and dormant modes 11. Drag-and-drop programming using mass storage over USB 13. 26 x multi-function GPIO pins 14. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 15. Accurate clock and timer on-chip 16. Temperature sensor 17. Accelerated floating-point libraries on-chip 18. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs40HQ: 763 cartons * 500 pcs = 381500 pcs
£9.99
-
WAVESHARE Waveshare RP2040-Plus Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader, RP2040-Plus with Pinheader
Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now. As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins. What is different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 4MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Lithium battery recharge/discharge header, suitable for mobile devices 6. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 7. Castellated module allows soldering direct to carrier boards 8. USB 1.1 with device and host support 9. Low-power sleep and dormant modes 10. Drag-and-drop programming using mass storage over USB 11. 26 x multi-function GPIO pins 12. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 13. Accurate clock and timer on-chip 14. Temperature sensor 15. Accelerated floating-point libraries on-chip 16. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs40HQ: 763 cartons * 500 pcs = 381500 pcs
£6.99
-
WAVESHARE Waveshare RP2040-Zero Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader mini Version, 20335
1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Castellated module allows soldering direct to carrier boards 6. USB 1.1 with device and host support 7. Low-power sleep and dormant modes 8. Drag-and-drop programming using mass storage over USB 9. 29 x multi-function GPIO pins (20 x via edge pinout, others via solder points) 10. 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels 11. Accurate clock and timer on-chip 12. Temperature sensor 13. Accelerated floating-point libraries on-chip 14. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs40HQ: 763 cartons * 500 pcs = 381500 pcs
£3.99
-
WAVESHARE WAVESHARE RP2350 4.3inch Capacitive Touch Display Development Board, Without Case, With Plastic Case
1. The RP2350B microcontroller chip, designed based on the Raspberry Pi architecture2. A unique dual-core, dual-architecture design featuring a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at up to 150MHz, allowing users to switch flexibly between the two architectures3. Features 520KB of SRAM, 16MB of on-board on-chip Flash, and 2MB of PSRAM4. Features a Type-C interface, eliminating the need to worry about orientation when plugging in5. Features a 4.3-inch on-board capacitive touchscreen LCD with 800 × 480 resolution and 65K colors6. Supports I2C interface control for capacitive touch, 5-point touch, and interrupts7. On-board resources include CAN, RS485, I2C interfaces, and isolated digital I/O8. On-board voltage regulator supports a wide input voltage range of 7V to 36V9. Inputs feature bidirectional optocoupler isolation, supporting both passive and active digital inputs; active inputs support both positive and negative voltages10. Outputs feature optocoupler isolation with enhanced drive capability, providing a sink current of up to 450mA (MAX)11. USB 1.1 host and device support12. Supports low-power sleep and hibernation modes13. Can be recognized as a mass storage device via USB for drag-and-drop program downloading14. Precise on-chip clock and timers15. Built-in temperature sensor for real-time chip temperature monitoring16. 12 programmable I/O (PIO) state machines for custom peripheral support17. Size: without case about 11.24 x 7.51 x 1.74 cm; with case about 11.63 x 7.9 x 1.8 cmSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 10cm * 4cm / 5.91inch * 3.94inch * 1.57inch Qty per Carton 80 Carton Weight 17.00kgs / 37.48lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 80 pcs = 37280 pcs40HQ: 1083 cartons * 80 pcs = 86640 pcs
£35.99 - £42.99
-
WAVESHARE WAVESHARE RP2350 High-Performance Development Board 480 X 480 Resolution, With Touch Screen
1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB of SRAM and 16MB of on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Programs can be downloaded via drag-and-drop by recognizing the device as a mass storage device via USB.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of terminal blocks, allowing for bottom or back wiring, facilitating integration into various applications such as rail mounting or embedded systems.16. Capacitive 5-point touch: Light touch for intuitive operation and multi-point UI interaction; touch functionality can be accessed via I2C signals, supporting 5-point touch.17. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs40HQ: 1130 cartons * 96 pcs = 108480 pcs
£30.99
-
WAVESHARE WAVESHARE RP2350 High-Performance Development Board 480 X 480 Resolution, Without Touch Screen
1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB SRAM and 16MB on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating concerns about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of wiring terminals, allowing for bottom or back wiring options, facilitating integration into various applications such as rail mounting or embedded systems.16. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs40HQ: 1130 cartons * 96 pcs = 108480 pcs
£24.99
-
WAVESHARE WAVESHARE RP2350 High-Performance Microcontroller Development Board Features 1.46-Inch Round Touchscreen Display, 32867
1. Features a 1.46-inch capacitive high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), Micro SD card slot, and other peripherals for easy development and integration into products.2. Uses the Raspberry Pi-designed RP2350B microcontroller chip.3. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.4. Built-in 520KB of SRAM and 16MB of on-chip Flash.5. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.6. On-board 1.46-inch LCD screen with a resolution of 412 x 412 and 65K colors.7. Supports I2C interface control for capacitive touch, 5-point touch, and interrupt support.8. On-board 3.7V MX1.25 lithium battery charging and discharging interface.9. USB 1.1 host and device support.10. Supports low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. 14 multi-functional GPIO pins.13. 2 I2C interfaces, 2 UART interfaces, 7 12-bit ADCs, and 12 controllable PWM channels.14. Accurate on-chip clock and timers, built-in temperature sensor for real-time monitoring of chip temperature.15. 12 programmable I/O (PIO) state machines for custom peripheral support.16. Gentle touch for intuitive operation and flexible multi-point UI interaction; touch functionality is provided via I2C signals, supporting 5-point touch.17. On-board audio codec chip supports high-quality audio processing, providing clear and high-quality audio input and output.18. Multiple interfaces are provided for easy expansion and development, offering greater flexibility.19. Interfaces: UART, I2C, USBSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs40HQ: 1040 cartons * 264 pcs = 274560 pcs
£23.99
-
WAVESHARE WAVESHARE RP2350 High-Performance Microcontroller Development Board Features 1.46-Inch Round Touchscreen Display, 32868
1. Features a 1.46-inch capacitive high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), Micro SD card slot, and other peripherals for easy development and integration into products.2. Uses the Raspberry Pi-designed RP2350B microcontroller chip.3. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.4. Built-in 520KB of SRAM and 16MB of on-chip Flash.5. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.6. On-board 1.46-inch LCD screen with a resolution of 412 x 412 and 65K colors.7. Supports I2C interface control for capacitive touch, 5-point touch, and interrupt support.8. On-board 3.7V MX1.25 lithium battery charging and discharging interface.9. USB 1.1 host and device support.10. Supports low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. 14 multi-functional GPIO pins.13. 2 I2C interfaces, 2 UART interfaces, 7 12-bit ADCs, and 12 controllable PWM channels.14. Accurate on-chip clock and timers, built-in temperature sensor for real-time monitoring of chip temperature.15. 12 programmable I/O (PIO) state machines for custom peripheral support.16. Gentle touch for intuitive operation and flexible multi-point UI interaction; touch functionality is provided via I2C signals, supporting 5-point touch.17. On-board audio codec chip supports high-quality audio processing, providing clear and high-quality audio input and output.18. Multiple interfaces are provided for easy expansion and development, offering greater flexibility.19. Interfaces: UART, I2C, USBSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs40HQ: 1040 cartons * 264 pcs = 274560 pcs
£21.99
-
Waveshare Waveshare RPi Camera (D) Fixed-focus Camera Module, 11297
Features1. Raspberry Pi Camera, compatible with the original one, supports all revisions of the Pi2. 5 megapixel OV5647 sensor in a fixed-focus module3. Camera specifications- CCD size : 1/4 inch- Aperture (F) : 2.8- Focal Length : 3.4 mm- Angle of View (diagonal) : 66 degree- Sensor best resolution : 1080p4. 2592 × 1944 still picture resolution5. Support 1080p 30fps, 720p 60fps and 640x480p 60/90fps video record6. Dimension: 25mm x 24mm x 9mmPackage Contents1. RPi Camera (D) x12. 15-pin FFC (opposite sides contact) x1Note: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableSpecification: Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 5cm * 4cm * 1cm / 1.97inch * 1.57inch * 0.39inch Qty per Carton 4800 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4800 pcs = 1329600 pcs40HQ: 644 cartons * 4800 pcs = 3091200 pcs
£11.99
-
Waveshare Waveshare RPi Camera (G) Module, Wide Field of View Fisheye Lens
Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. 5 megapixel OV5647 sensor4. Adjustable focus distance5. Camera specifications- CCD size : 1/4inch- Aperture (F) : 2.35- Focal Length : 3.15mm- Angle of View (diagonal) : 160 degree (while other normal cameras 5.5are typically 72 degree)- Sensor best resolution : 1080p6. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting fill flash LED7. Dimension: 25mm x 24mmPackage Contents1. RPi Camera (G) x12. 15-pin FFC (opposite sides contact) x1Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 6cm * 5cm * 2cm / 2.36inch * 1.97inch * 0.79inch Qty per Carton 1600 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1600 pcs = 443200 pcs40HQ: 644 cartons * 1600 pcs = 1030400 pcs
£16.99
-
waveshare Waveshare RPi Camera (H) Module, Fisheye Lens, Supports Night Vision, (H) Fisheye Lens Module
Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. Comes with infrared LED, supports night vision4. 5 megapixel OV5647 sensor5. Adjustable focus distance6. Camera specifications- CCD size : 1/4inch- Aperture (F) : 2.35- Focal Length : 3.15mm- Angle of View (diagonal) : 160 degree (while other normal cameras are typically 72 degree)- Sensor best resolution : 1080p7. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting infrared LED and/or fill flash LED8. Dimension: 25mm x 24mmPackage Contents1. RPi Camera (H) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableSpecification: Package Weight One Package Weight 0.07kgs / 0.14lb One Package Size 6cm * 5cm * 2cm / 2.36inch * 1.97inch * 0.79inch Qty per Carton 1600 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1600 pcs = 443200 pcs40HQ: 644 cartons * 1600 pcs = 1030400 pcs
£20.99
-
Waveshare Waveshare RPi Motor Driver Board
Raspberry Pi Expansion Board, DC Motor / Stepper Motor DriverFeatures1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. Freescale H-bridge driver MC33886, controls DC motors to turn in both directions3. Onboard 5V regulator, provides power to Raspberry Pi4. Onboard IR receiver, used for remote control robot5. Multi protection circuit, excellent stability- 2A self-recovery fuse, keep your Pi safe- Driver chip features Short-Circuit Shutdown for Large Output Current, Undervoltage Disable Function- Reversed polarity protection for motor output- Anti-reverse diode for power supply6. Power input range: 7V~40V7. Single motor output current: up to 5A8. Power supply current for Raspberry Pi: up to 2AWhats on Board1. Raspberry Pi Expansion Board on board resource2. Raspberry Pi GPIO interface: for connecting Raspberry Pi3. Motor screw terminal: for connecting motors4. External power input5. 74LVC4245AD: voltage level conversion chip, buffer device6. MC33886: motor driver chip7. LM2596-5.0: 5V regulator8. Power indicator9. Raspberry Pi power selection10. OFF: Raspberry Pi powers the Motor Driver Board11. ON: Motor Driver Board powers the Raspberry Pi12. 2A self-recovery fuse13. IR receiver14. Schottky diodes: protects the motor driver15. Power supply anti-reverse diodePackage Contents1. RPi Motor Driver Board x 12. RPi screws pack (2pcs) x 1Specification: Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 9cm * 8cm * 3cm / 3.54inch * 3.15inch * 1.18inch Qty per Carton 390 Carton Weight 21.84kgs / 48.15lb Carton Size 54cm * 40cm * 39cm / 21.26inch * 15.75inch * 15.35inch Loading Container 20GP: 316 cartons * 390 pcs = 123240 pcs40HQ: 734 cartons * 390 pcs = 286260 pcs
£21.99
-
Waveshare RPi Relay Board, RPi Relay Board
OverviewThe RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent.RPi Relay Board Features1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. High quality relays, loads up to 5A 250V AC or 5A 30V DC3. Photo coupling isolation, prevent interference from high voltage circuit4. Onboard LEDs for indicating relays status5. Relay control jumper, allows to control the relays by custom pins other than the default pins6. Comes with development resources, including examples in wiringPi, WebioPi, shell, python, and bcm2835What is on the RPi Relay Board1. Raspberry Pi GPIO interface: for connecting Raspberry Pi2. Relay screw terminal: for connecting target devices3. Relays4. Photocoupler: PC8175. Relay indicator- LED on: relay NC is opened, NO is closed- LED off: relay NC is closed, NO is opened6. Power indicator7. Relay control jumper- Short the jumper: control the relays by default I/Os used in the example code- Open the jumper: control the relays by custom I/Os through jumper wiresPackage include- RPi Relay Board x 1- RPi screws pack (2pcs) x 1Specification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 8cm * 7cm * 2cm / 3.15inch * 2.76inch * 0.79inch Qty per Carton 700 Carton Weight 52.50kgs / 115.74lb Carton Size 56cm * 35cm * 40cm / 22.05inch * 13.78inch * 15.75inch Loading Container 20GP: 340 cartons * 700 pcs = 238000 pcs40HQ: 789 cartons * 700 pcs = 552300 pcs
£10.99
You have seen 216 out of 251 products