Products
-
Car Enhancements UK Enhanced Edition Footwell Lighting Upgrade – MK2 Ford Puma
Enhanced Edition Footwell Lighting Upgrade – MK2 Puma Add a touch of brilliance to your interior with our Enhanced Edition Footwell Lighting Upgrade—engineered specifically for the MK2 Ford Puma. Designed to boost visibility and ambience, this is the ultimate plug-and-play lighting solution. ⚙️ What’s Included? We now offer two variants to suit your preferred finish: 🔧 Version 1 – Flexible 12SMD Panel Slimline design with foam adhesive backing Plug-and-play fitment using factory wiring Mount anywhere under the footwell Available in 6 vibrant colours 🧩 Version 2 – OEM Style Unit Complete OEM-style housing Upgraded with a powerful 12SMD LED chipboard Simple factory fit for a clean, professional finish Available in 4 colours ⚠️ Green and Orange currently unavailable for this version 🚗 When Do They Illuminate? Your footwell lights will activate when: 🚪 You open the vehicle doors 🅿️ The engine is switched off 🚘 The engine is on (ambient driving light mode) These mimic the OEM ambient lighting functionality, adding both style and practicality to your ride. 🔌 Compatibility & Installation ✅ Confirmed Fitment: All MK2 Puma models (including ST & lower-spec variants) All MK2 Pumas have pre-installed footwell wiring—usually found inside the hole under the footwell, clipped behind the steering panel. Installation takes minutes with no coding or complex wiring needed. 📦 What’s in the Box? 2x Footwell Lighting Units (V1 or V2 based on selection) 🛡️ Warranty: ✅ 12-Month CEUK WarrantyFor extended warranty claims, original product packaging must be retained.
$14.00 - $25.00
-
Car Enhancements UK Enhanced Edition Full Replacement LED Footwell Unit - MK3 Focus
Ultra Bright Footwell LED Replacement Units – Enhanced Edition (Pair) Not impressed with your factory footwell lights?Still relying on a dim LED bulb? It’s time for an upgrade. Introducing the Enhanced Edition Footwell LED Replacement Units, delivering serious brightness and a premium OEM-style finish for your Ford. ⚡ Unmatched Brightness & OEM Fit 🔦 18 SMD LEDs per unit – all forward-facing for maximum illumination 💡 Up to 18x brighter than OEM, 5x brighter than our previous LED bulb upgrade 🧩 OEM-style replacement housing – looks completely factory once fitted 🔌 Plug & Play with direct OEM connector looms included 🎨 Available Colours 5000K Bright White (default) Optional Colour Variants Available (select from Options) 🚗 Confirmed Fitment ✅ Ford Focus MK3 / MK3.5 (All Models)(Only compatible with vehicles equipped with OEM footwell wiring) May fit other Ford models – please contact us to confirm fitment. 🧰 What’s in the Box? 2x Ultra Bright Footwell LED Replacement Units 2x OEM Plug Adapter Looms Instructions Included 🛠️ Installation Remove existing unit Plug in the new LED unit using the adapter Push into place – no coding or tools required Install time: under 5 minutes. ✅ Warranty 12-Month Standard Warranty included.(For extended warranty, packaging must be retained if it states more than 12 months.)
$30.00 $25.00
-
Car Enhancements UK Enhanced Edition LED H7 Mini (477 / PX26d)
Enhanced Edition H7 Mini LED Bulbs – Ultra Compact, 12,000Lm Output (6000K Ice White) All the power of our popular V3 LED Bulb – in a compact, low-profile design.Introducing the Enhanced Edition H7 Mini, designed to deliver exceptional brightness and clarity while eliminating the bulk of traditional LED upgrades. This is the perfect solution for tight-fit housings or vehicles with limited rear clearance. Ideal for dipped beam, high beam, or fog light applications, the H7 Mini fits any vehicle using a standard H7 fitting – no adapters, clips, or caps required. This item is also known as: Standard Trade Ref Base Type Watt H7 477 PX26d 55w
$74.00 $57.00
-
Car Enhancements UK Enhanced Edition Sequential Indicators for MK7 Fiesta (Pre-Facelift & Facelift) | Smoked Lens
The All-New Enhanced Edition Sequential Indicator Unit – For MK7 Ford Fiesta (Pre-Facelift & Facelift) Ready to take your Fiesta’s styling to the next level? CEUK’s Enhanced Edition Sequential Indicators are the perfect upgrade to pair with your LED front and rear indicators, delivering smooth amber strobing and a premium smoked finish – all in a full plug-and-play unit. 🔧 Key Features: 🔁 Amber Sequential LED IndicatorProvides a flowing strobe effect, adding a modern, dynamic look to your mirrors. 🔌 Direct Plug-and-Play FitmentSimply remove the factory lens and bulb and replace it with CEUK’s full replacement unit – no rewiring or coding needed. 🌫️ Smoked Lens FinishClean and aggressive styling that blends seamlessly into your mirror housing. ✅ CANBUS CompatibleError-free operation on most vehicles – no additional resistors or adapters required. 📦 What’s Included: 1x Pair of CEUK Enhanced Edition Sequential Mirror Indicators(Left & Right with smoked lenses and pre-installed amber LEDs) 🚘 Vehicle Compatibility: Ford Fiesta MK7 (Pre-Facelift & Facelift models) 2008-2017 🛡️ Warranty: Covered by a 12-month CEUK standard warranty(If packaging states a longer warranty, please retain the packaging for claims) 💡 Upgrade your mirrors with factory-fit quality and show car style.🔥 Enhanced Edition by CEUK – Built to stand out.
$60.00 - $61.00
-
Car Enhancements UK Enhanced Glove Box LED Strip for MK7 / MK7.5 Fiesta | Plug & Play
Enhanced Edition Glove Box LED Strip Light – Add Ambience to Your Fiesta Transform the interior of your MK7 / 7.5 Fiesta with our Enhanced Edition Glove Box Strip Light, designed to either replace your factory strip or add the feature entirely to models that lack it. Whether you're going for a subtle glow or a bold colour change, this upgrade gives your interior a fresh, premium touch. The LED strip activates with your vehicle ignition, providing ambient lighting during your drive and while the car is in use. No cutting or splicing required – this is a true plug-and-play kit designed for a fast, clean install in under 10 minutes. 🔧 Key Features: Direct OEM-style fit for MK7 Fiesta Plug-and-play with no modifications Ultra bright LED strip in your choice of colour Powers on with ignition – ambient lighting on the go Built-in 3M adhesive for secure, clean install Easy DIY fitting with full instructions 📦 What’s in the Box? 1x Enhanced Edition LED Strip with integrated 3M backing (your colour choice) 1x Plug-and-Play wiring loom 1x Alcohol cleaning wipe 1x Installation Manual 🛠️ Fitting Requirements: Basic tools required: 10mm socket & driver/ratchetInstallation time: Approx. 10 minutesNo electrical experience necessary, but basic car knowledge is helpful. 🛡️ Warranty: 12-month standard warranty. If the product packaging states a longer duration, please retain it to claim the extended warranty.
$41.00 $34.00
-
Car Enhancements UK Enhanced Performance Quick Shift - MK8 Fiesta ST
Its finally here! The Enhanced Performance quick shift for the MK8 Fiesta ST from CEUK Made from CNC Machined T6061 Aluminium Easily installed in 10-15 minutes Hard Anodized Black for durability 2 Different throw Levels (15% & 25% reduction) Engraved with CEUK Traditional & Workshop Logo Perfectly engineered to allow you to speed up your shifting and get the power down sooner! Protected by UK Copyright Law: Ref 6122258
$68.00
-
Car Enhancements UK Enhanced Performance Spoiler Risers MK7 / MK7.5 Fiesta (Multiple Colours)
After the massive success of the Ford Focus MK3 Wing Riser Kit, We have now brought you the most affordable wing riser kit available for all variants of the Mk7 Fiesta. This new and improved riser kit has been made for you, rising above the competition, no more huge gaps between your spoiler and boot whilst staying in line with the roof giving you that perfect aggressive look you’re after! Perfectly crafted and produced now from Metal, they have been made to withstand high forces whilst on the road whilst clearing dirt and rain of the rear window by diverting air across the rear window. Full stainless steel Hardware as standard throughout on all our products with detailed instructions to make your life simple that are available to download. As they are now made from Metal, they are only available in Black! We do however have some clearance of the old coloured 3D printed available, These are currently reduced. Protected by UK Copyright Law: Ref 6122259
$68.00
-
Car Enhancements UK Fiesta MK8 & 8.5 (All Models) Rear Window Side Addon
Rear Window Panel Covers – Ford Fiesta MK8 & MK8.5 (2017–2024) Transform the look of your Fiesta’s rear windows with these sleek Gloss Black Panel Covers. Designed to overlay the dull factory grey/matte plastic trim, these covers add a sharp, premium finish that perfectly complements tinted windows and gloss styling packs. 🔧 Key Features: 🎯 Direct Fit for MK8 & MK8.5 Fiesta (2017–2024) 🎨 Gloss Black ABS Finish – UV-resistant and durable 🛠️ Easy Install – 3M VHB Adhesive Tape Pre-Applied ✅ Full Coverage – Designed to sit flush over OEM textured panel 📽️ Includes Installation Video + VHB Surface Cleaners 📦 What’s Included: 2x Rear Window Panel Covers (Left & Right) 2x VHB Surface Cleaning Wipes 1x Installation Video (digital access) 📌 Fitment: Compatible with ALL trims of the Ford Fiesta MK8 / MK8.5(2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024) Fits seamlessly over the rear window edge panel next to the glass 🚫 Not 3D printed – premium moulded ABS plastic construction with protective film to prevent scratches in transit. 🛡️ Design Protection: This product is protected under UK Registered Design Rights – Ref: 6230937
$86.00 $72.00
-
Car Enhancements UK Fiesta MK8 & MK8.5 Engine Bay Dress-Up Kit | Anodized Washers & Stainless Screws | CEUK
CEUK Bespoke Engine Bay Dress-Up Kit – For Fiesta MK8 & MK8.5 (2017–2024, including ST & ST-Line) Add the detail that sets your build apart.At CEUK, we're known for the finishing touches—and this is one of our most sought-after products. While most enthusiasts focus on big mods, the little things like rusty factory screws are often left untouched. We’ve fixed that. Our Bespoke Dress-Up Kits replace those tired OEM fixings with anodized aluminium washers and rust-proof stainless steel screws, giving your bay a fresh, eye-catching finish. ✨ Why Choose Our Kit? 🛡️ Rust-Free Forever – Premium-grade stainless steel screws 🎨 Custom Look – Choose from a wide range of anodized washer colours ⚙️ Engineered to Fit – These are not generic M6 bolts! Each screw is a direct replica of the OEM fixings 🔩 No Drilling, No Guesswork – Fit straight in with zero modification 🔧 Designed for Fiestas – Perfect fit for MK8 & 8.5 models (2017–2024) including ST and ST-Line 📦 Kit Options: 🔹 Option 1 – Full Engine Bay (12-piece) 12x Anodized Washers 12x Stainless Steel Screws 🔍 Locations: Headlights, Wings, Bonnet Latch, Slam Panel 🔸 Option 2 – With Headlight Clip Fixings (14-piece) 14x Anodized Washers 14x Stainless Steel Screws 🔍 Additional Fitment: Replaces plastic clip screws in headlight fixings 🆚 Why Not eBay Kits? You've probably seen £7 kits online—but here's the truth: ❌ They use generic M6 screws (which won’t fit your Fiesta) ❌ Cheap anodizing fades quickly ✅ Our washers are machined from premium aluminium, anodized to last, and tested for perfect fit ✅ Our screws are made to OE spec—no trimming, drilling, or hoping they’ll work. 🔁 Need Extras? We offer ad-hoc washer/screw orders if you need replacements or want to expand your kit. Just get in touch. 🛡️ Warranty: Backed by a 12-month CEUK guarantee as standard. 💬 Upgrade every detail. Go #Enhanced.
$23.00 - $27.00
-
Car Enhancements UK Fiesta MK8 (ST & ST Line) Front Fog Surround Addon
Front Fog Surrounds – Fiesta MK8 ST/ST-Line (2017-2022) Add an aggressive touch and a premium finish to your front end with the CEUK Front Fog Light Surrounds, designed specifically for the Ford Fiesta MK8 ST and ST-Line (2017-2022 Pre Facelift). These precision-moulded surrounds install directly over your OEM fog light trims using ultra-strong 3M VHB adhesive, offering effortless style with zero drilling required. 📦 What’s Included: 1x Pair of Fog Surrounds (Left & Right) Pre-Applied 3M VHB Mounting Tape 2x VHB Surface Cleaning Wipes 1x Installation Video Link 🧱 Materials & Finish: 💎 ABS Plastic – Durable and built to last 🖤 Gloss Black (Standard) 🔒 Protective film applied for scratch-free delivery 🛠️ Not 3D printed – precision Vacuum moulded for the perfect fit and finish. ⚙️ Fitment: ✔️ Ford Fiesta MK8 ST ✔️ Ford Fiesta MK8 ST-Line 📅 Year: 2017 – 2022 Applies directly over your existing fog light surrounds – no modification needed! Protected under UK Registered Design Rights – Ref: 6295954 🎥 Installation: A step-by-step video guide is included to make fitting as quick and simple as possible.No tools, no stress – just style. View our installation Video here!
$98.00 $82.00
-
Car Enhancements UK Ford Fiesta MK7 / MK7.5 - Engine Bay Dress-Up Kit – Anodised Washers | CEUK
Bespoke Engine Bay Dress-Up Kit – Ford Fiesta MK7 / 7.5 Give your engine bay the finishing touch it deserves with our CEUK Bespoke Dress-Up Kit, designed specifically for the MK7 / 7.5 Ford Fiesta. Why leave rusty, worn factory screws in a show-stopping engine bay? With our premium anodized aluminium washers and stainless steel screws, you’ll elevate the look, durability, and detail of your build in minutes. 🔧 Kit Options: Option 1 – Engine Bay Kit 11x Anodized Washers 11x Stainless Steel Screws Fitment: Headlights, Wings, Bonnet Latch Option 2 – Engine Bay + Slam Panel Kit 15x Anodized Washers 15x Stainless Steel Screws Fitment: Headlights, Wings, Bonnet Latch, Slam Panel(Includes 4 screws to replace OEM plastic slam panel clips) Option 3 – Full Dress-Up Kit (Including Boot) 19x Anodized Washers 19x Stainless Steel Screws Fitment: Headlights, Wings, Bonnet Latch, Slam Panel, Boot Lid 💡 Key Benefits: ✅ No Rust Ever – Stainless steel screws won't corrode ✅ Premium Anodized Finish – Available in multiple vibrant colours ✅ OEM-Grade Fitment – Direct factory replacements, no drilling or modifying needed ✅ Built to Last – Washers made from high-grade aluminium with long-lasting anodizing ⚠️ Why Buy from CEUK? Unlike cheap eBay kits that include universal M6 bolts, CEUK kits are vehicle-specific and made with precision-fit stainless screws and durable anodized washers.No guesswork. No compromises. Just perfect fit and finish. Need extras or a custom kit? Get in touch for ad-hoc orders!
$23.00 - $39.00
-
Car Enhancements UK Ford Fiesta MK8 & 8.5 (All Models) Rear Window Side Cover (Hex Design)
Rear Window Panel Covers – Ford Fiesta MK8 & MK8.5 (2017–2024) Transform the look of your Fiesta’s rear windows with these sleek Gloss Black Panel Covers. Unlike our full black moulded covers, these are designed as a partial cover with a sporty hexagon design to add depth to the part. 🔧 Key Features: 🎯 Direct Fit for MK8 & MK8.5 Fiesta (2017–2024) 🎨 Gloss Black Acrylic Finish – UV-resistant and durable 🛠️ Easy Install – 3M VHB Adhesive Tape Pre-Applied ✅ Sporty Look – Designed to Enhance 📦 What’s Included: 2x Rear Window Panel Covers (Left & Right) 1x VHB Surface Cleaning Wipes 📌 Fitment: Compatible with ALL trims of the Ford Fiesta MK8 / MK8.5(2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024) Fits seamlessly over the rear window edge panel next to the glass 🚫 Not 3D printed – premium acrylic construction with protective film to prevent scratches in transit. Want a different colour to Gloss Black? Get in touch now via email or whatsapp!
$17.00
-
Car Enhancements UK Ford Fiesta MK8 - ST Logo Projector Puddle Light Replacement Units (Multiple Colours) 2017-2024
** EARLY BIRD OFFER - FIRST 200 SETS WILL BE £50 ** CEUK Logo Puddle Light UnitsFor Ford Fiesta 2017–2024 (MK8 & MK8.5) Make every arrival an event. Introducing the world’s first OEM-spec logo puddle light units for the Ford Fiesta, designed, engineered and exclusively released by Car Enhancements UK. Developed from the ground up to replace the factory units, these are not generic stick-on projectors — they are true replacement modules built to OEM standards. 🔥 What Makes These Different? This isn’t just another puddle light. World-first design for the Fiesta platform Full OEM-style housing – direct replacement for factory units Crisp logo projection – sharp, bright, and perfectly aligned 12 selectable colour options – tailor the look to your build Exclusive to CEUK – unavailable anywhere else worldwide When you open the door, the logo is projected cleanly onto the ground, delivering a premium factory-plus look that genuinely stands out at night. 🛠 OEM-Spec Engineering Designed specifically for Ford Fiesta 2017–2024 (See FAQ Below) Precision-moulded housings for perfect fitment Integrated optics for sharp, distortion-free projection High-quality LED internals for consistent brightness Simple install using supplied connectors (cutting required) These units are engineered to look and fit like they came from the factory — because that’s exactly how we designed them. 🎨 12 Colour Modes Choose from 12 different projection colours, allowing you to match: Vehicle paintwork Interior ambient lighting Wheels, brake calipers, or exterior accents Whether you want subtle white or something bold and eye-catching, the choice is yours. 🚗 Vehicle Compatibility ✔ Ford Fiesta MK8 & MK8.5 (See FAQ Below)✔ Model years 2017–2024✔ ST & ST-Line variants Please note this product Will Not Fit the mirrors with a recessed unit and OEM Logo projector, this is a completely different housing! Please see photo for guidance of what fits and what does not! (Designed as a direct replacement for factory puddle light locations) 📦 What’s Included 2 × CEUK OEM-spec logo puddle light units (Left and right) Wiring connectors Logo Adjustment Tool Fitting Instructions 💡 Why Choose CEUK? We don’t rebrand off-the-shelf parts. These puddle lights were designed exclusively for the Fiesta platform, tested in-house, and refined to meet OEM expectations. This is a true CEUK exclusive, built for owners who want something genuinely different — not something everyone else already has. When your Fiesta makes an entrance, make sure it does it properly.🟨 CEUK Logo Puddle Light Units – OEM fit. World first. Exclusive. 🛡 Registered UK Design – CEUK Exclusive This product is protected by a registered UK design (Design No. 6497663). The external housing, lens positioning, mounting geometry, and overall visual appearance of these vehicle puddle light units have been independently designed and developed by Car Enhancements UK and are protected under UK registered design law. Design protection is claimed for the appearance of the product as illustrated, covering the distinctive OEM-style replacement form and physical configuration. Any unauthorised copying or sale of products that reproduce the same or substantially similar appearance may constitute an infringement of our registered design rights. These puddle light units are a world-first CEUK design and are exclusive to Car Enhancements UK. FAQ: My Car does not have puddle lights as standard - will these still fit? No, Unfortunately if your vehicle does not have puddle lights this unit can not be fitted. Is it not a retrofit unit but a replacement for the OEM single colour puddle light. You can however retrofit mirrors to the vehicle which do have puddle lights in, which will then enable you to have this product. You would need to purchase the mirror housings, Modules and wiring looms. This can become quite expensive, requires knowledge of this type of work and may also require coding to the vehicle. My car already has the logo puddle lights from standard, will these fit? This kit will only fit vehicles that do not currently have the Logo puddle lights – So if you have puddle lights, but theyre just white you are fine. We have attached a photo to the listing to show the compatibility! If you have the none compatible mirrors this unit will not fit! Do i have to cut any wires to fit this product? Yes. Unfortunately as standard the puddle lights on this vehicle is hard wired into the vehicle wiring loom, and does not have a clip to be able to disconnect the factory unit from the car. As a result, we have made the kit very simple to install, and its a simple case of Disconnect the battery, Strip the mirror down, Cut 2 wires and connect our units via the supplied wire connectors! Is a fitting guide provided? Yes, We have made an extensive step by step fitting video which is available on youtube to show you how to install this product. What tools are required to fit? To install this kit you require a Trim Removal tool, A T20 Torx Bit, a set of Wire Cutters and an optional set of wire strippers (You can use the cutters to strip the cable if you are comfortable. Do they cause warnings or canbus errors? This product will not cause any canbus errors or dash lights on the vehicle once installed correctly! Can i change the colour of the unit at a later date? Yes, thanks to our Luminos Film tint technology incoroprated into the unit, we can supply replacement films at a later date to change the colour of the logo projection if required! Why buy these over the ford Edition mirrors with built in units? Not only are the Ford full mirror units hugely expensive, but the logo is not as bright and as crisp as our unit, and the colour can not be changed on the Ford unit! Are these road legal and MOT Compliant? Yes.Puddle lights are courtesy/entry lighting only and are not part of the vehicle’s forward lighting system. They do not affect MOT testing when fitted and operating correctly. Will these drain my battery? No.The lights operate only when the vehicle unlocks or doors are opened and draw minimal current, comparable to the factory units they replace. They automatically switch off with the vehicle. Can these be installed on both LHD and RHD? Yes.The projection is symmetrical, so these units work correctly on both left-hand-drive and right-hand-drive vehicles. Are they waterproof? Yes.The units use sealed housings suitable for exterior door mounting and are designed to withstand rain, road spray, and normal UK weather conditions. What is the warranty like? We offer 12 month warranty as standard on all CEUK Products Are these Exclusive to CEUK? Yes, This product was designed in house by Car Enhancements UK. These are a WORLD FIRST and CEUK EXCLUSIVE!
$68.00 - $69.00
-
Car Enhancements UK Ford Performance Number Plate Surrounds – Multi-Colour Logo | Sold as a Pair
Ford Performance Number Plate Surrounds – Multi-Colour Logo Options Available Give your Ford a sharp, motorsport-inspired finishing touch with these Ford Performance number plate surrounds. Designed to fit most standard UK plates, they add style, colour, and identity to any build – while ensuring a clean and secure plate fit for both front and rear. 🎨 Logo Colour Options: "FORD" – Always in White for a bold, clean finish "PERFORMANCE" available in: 🔵 Sky Blue (RAL 5015) 🟢 Mean Green (RAL 6018) 🟡 Primrose Yellow (RAL 1026) 🔴 Race Red 📦 Product Features: ✅ Sold as a Pair – One for front, one for rear. IF YOU WOULD LIKE SINGULAR- PLEASE EMAIL US: Support@ceuk.org 🧲 Secure Fit – Compatible with most UK standard registration plates ✨ High-Quality Finish – Durable materials with precision-printed logo 🔧 Tool-Free Opening Option –Can be opened using: An optional CEUK Key Tool (sold separately) A flat electrician’s screwdriver Or by pulling firmly by hand if you prefer 💡 Why Choose These Plate Holders? Add OEM+ styling and a personal touch to your Ford Built for long-lasting performance – no cheap printing or fading A simple, effective upgrade that makes a big visual difference 🎯 Perfect for show builds or everyday style.🔥 Ford Performance Plate Surrounds – Stand out, stay secure.
$41.00 - $55.00
-
Car Enhancements UK Genuine Carbon Fibre Gear Knob with Red ST Logo – Fits Most Manual Ford Models
Genuine Carbon Fibre Gear Knob – 6-Speed with Red ST Logo Add the ultimate finishing touch to your Ford's interior with our full carbon fibre gear knob, designed to fit most Ford manual models from 2009 onwards. Featuring the iconic Red ST logo and a 1–6 + R gear pattern, this performance-inspired upgrade is as stylish as it is functional. 💎 Key Features: ✅ Real Carbon Fibre Construction – not hydro-dipped! 🔴 Bold Red ST Logo 🧭 Printed 6-Speed Shift Pattern (1-6 + R) 🛡️ Thick Clear Coat for protection against scratches and wear 🔧 Simple Screw-On Installation – swap it in seconds ⚖️ Product Weight: 155g – for a premium feel in hand 🚗 Fitment: Fits the majority of Ford manual transmission vehicles from 2009 onwards, including: Focus ST Fiesta ST Puma ST Mondeo / Kuga And more ❗ Note:Gear pattern is printed and cannot be changed, so may not match non-ST layouts (e.g., MK8 1.0L EcoBoost). 🧠 Additional Notes: This is an aftermarket upgrade (not a genuine Ford part) Want the OEM Ford item? 🔍 Search Part Code: 2215799 on our site 🛡️ Warranty: Includes a 12-month CEUK warranty as standard.If your packaging notes a longer warranty, please retain it for coverage validation.
$130.00 $109.00
-
Car Enhancements UK IllumiNite H1 Ice White Main Beam Bulb Upgrade – 6500K Bright White (448 | P14.5s)
Struggling with poor visibility or tired of yellowish OEM headlights? Upgrade your main beam with our H1 Ice White Bulb Upgrade, designed to deliver crisp 6500K white light for a clean, modern look and vastly improved visibility. Whether you're upgrading for style or safety, these bulbs will give your vehicle a fresh new appearance and make night driving far more comfortable. 💡 Key Features: Direct H1 main beam replacement – no wiring required 6500K Ice White output for a premium, modern look Increased clarity and range for better night-time driving Suitable for reflector and projector headlight housings Fully road legal halogen solution (not LED or HID) Plug-and-play installation – quick and easy A great match with CEUK's Ice White dipped and fog light upgrades This item is also known as: Standard Trade Ref Base Type H1 448 P14.5s 🔧 Installation Tip: For best results, a headlight alignment check is recommended after any bulb upgrade. 🛒 What’s Included: 2x H1 6500K Ice White Bulbs (Sold as a pair) 🚗 Vehicle Compatibility: Compatible with all vehicles using H1 main beam bulbs.Please confirm bulb fitment before purchase, especially on special edition models like Ford ST or VW GTI, which may use alternate housings. 🛡️ Warranty: 12-month standard warranty included.If the product packaging states a longer period, keep the packaging to validate your extended warranty.
$18.00 $15.00
-
Car Enhancements UK IllumiNite H7 Ice White Dipped Beam Bulb Upgrade – 6500K Crisp White (477 | PX26d)
Brighten your drive and enhance your car's appearance with the H7 Ice White Dipped Beam Bulb Upgrade – the ideal plug-and-play halogen upgrade. Tired of the dull yellow factory headlights? These H7 6500K Ice White bulbs offer a crisp, bright white output that transforms your night-time visibility and gives your car a premium look without the need for expensive HID or LED conversions. Designed to be a direct OEM replacement, these bulbs install easily with no wiring or modifications required. 💡 Key Features: Direct replacement for H7 dipped beam bulbs Crisp 6500K Ice White colour Up to 3x more light in reflector headlights Approx. 10% more brightness in projector headlights Ideal for drivers wanting better night vision without full LED/HID upgrades Plug-and-play install – no extra equipment or coding needed Road legal and CANBUS-friendly on most vehicles Perfect match to other IllumiNite bulb upgrades This item is also known as: Standard Trade Ref Base Type H7 477 PX26d 🔧 Installation Note: As with any bulb upgrade, we recommend a headlight alignment check after installation for optimal beam performance. 🛒 What’s Included: 2x H7 6500K Ice White Bulbs (Sold as a pair) 🚗 Vehicle Fitment: Compatible with vehicles that use H7 dipped beam bulbs.Please confirm your vehicle’s bulb type before purchase, especially for models with different trim specifications (e.g. Ford ST, VW GTi). 🛡️ Warranty: Covered by a 12-month warranty as standard.If your product packaging lists an extended warranty period, retain the packaging to validate the extension.
$22.00 $18.00
-
Car Enhancements UK Mk3 Ford Focus - Engine Bay Dress-Up Kit – Anodised Washers | CEUK
Bespoke Engine Bay Dress-Up Kit for Ford Focus MK3 (All Models) One of CEUK’s signature products — our Bespoke Dress-Up Kit — is now available for the MK3 Focus, including all trim levels. Designed to replace the rusty, worn factory screws with premium anodized washers and stainless steel screws, this kit adds serious visual impact to your engine bay. Whether you're building a show car or just want to clean up under the bonnet, this is a simple and effective upgrade that delivers both form and function. 🔧 Available Options: Option 1 – Engine Bay Screw Replacement 12x Anodized Washers 12x Stainless Steel Screws Fits: Headlights, Wings, Bumper, Scuttle Panel Option 2 – Engine Bay + Slam Panel Clip Replacement 16x Anodized Washers 16x Stainless Steel Screws 4x Replacement Slam Panel Clips (replace OEM black plastic clips) Fits: Headlights, Wings, Bumper, Scuttle Panel, Slam Panel 💡 Why Choose CEUK? ✅ Stainless Steel Screws: Will never rust ✅ Premium Anodized Washers: Fade-resistant, high-strength aluminium ✅ Perfect Fit: Direct factory screw replicas — no drilling, no guesswork ✅ Custom Colours: Match your bay to your theme ✅ No Cheap Parts: Unlike eBay kits with incorrect M6 screws, our kits are made specifically for your vehicle You’re not just getting hardware — you’re getting an upgrade worthy of your build. 📩 Need a custom configuration? We offer ad-hoc washers and screws — contact us for details!
$25.00 - $33.00
-
Car Enhancements UK Mk6 Ford Fiesta - Engine Bay Dress-Up Kit – Anodised Washers | CEUK
Bespoke Engine Bay Dress-Up Kit for Ford Fiesta MK6 / 6.5 Turn heads with one of our most iconic enhancements — the CEUK Bespoke Dress-Up Kit, now available for the MK6 / 6.5 Ford Fiesta. You’ve upgraded the look of your engine bay, so why leave rusty old screws ruining the finish? This kit replaces tired factory bolts with premium anodized washers and stainless steel screws for a sleek, colour-matched finish that resists corrosion and elevates your build. ✅ Available Options 🔧 Option 1 – Engine Bay Only 9x Anodized Washers 9x Stainless Steel Screws Fitment Locations: Headlights, Wings, Behind Grille, Coolant Bottle 🔧 Option 2 – Engine Bay + Rear Lights 13x Anodized Washers 13x Stainless Steel Screws Fitment Locations: Everything in Option 1, plus Rear Light Screws ✅ Why CEUK? Premium materials: No rust, no fading – just high-grade anodized aluminium and true stainless steel Custom fitment: Direct replacements tailored to the MK6 / 6.5 Fiesta More reliable than eBay kits: Others supply incompatible M6 bolts — ours are exact-fit replicas Multiple colours available: Match your theme, stand out at shows Simply remove your old hardware and replace with CEUK’s ready-to-fit kit. No cutting, no modding — just a clean and immediate upgrade. Need a custom screw/washer combo? Reach out to us — we offer ad-hoc kits for individual requirements.
$19.00 - $25.00
-
Car Enhancements UK Mk8 & 8.5 Fiesta - LED Sequential Side Repeater Unit
CEUK Enhanced Edition Sequential Indicator Unit – For MK8 & MK8.5 Ford Fiesta Take your Fiesta to the next level with the Enhanced Edition Sequential Indicators, engineered exclusively by CEUK. Designed to match our full line of LED front and rear indicators, this mirror-mounted upgrade adds a premium touch of modern styling and dynamic lighting – all in a simple, plug-and-play replacement unit. 🔧 Key Features: 🔁 Amber Sequential LED StripFeatures smooth, flowing motion for a high-end OEM+ appearance. 🛠️ Plug-and-Play InstallationNo cutting, no wiring – simply remove your OEM bulb and lens, and slot in the complete CEUK unit. ✅ CANBUS Compatible100% error-free performance – no resistors or extra coding needed. 🌫️ OEM-Fit HousingBuilt with precision to ensure seamless fitment and durability, using in-house CEUK design and tooling. 🧠 CEUK Exclusive DesignNot available anywhere else at this level of fit, finish, and performance. 📦 What’s Included: 1x Pair of Enhanced Edition Sequential Indicator Units (Left & Right) Pre-installed Amber LED strip in CEUK custom housings 🚘 Vehicle Compatibility: ✅ Ford Fiesta MK8 - 2017-2022 ✅ Ford Fiesta MK8.5 - 2022-2024(All models and trims supported) 🛡️ Warranty: Standard 12-month CEUK warranty(If the packaging specifies an extended warranty, please retain it for proof) ⚖️ Protected Design: This product is protected under British Copyright LawIntellectual Property Ownership Reference: 6085957 💡 Bold looks. Dynamic light. Factory-quality fit.🔥 CEUK Enhanced Edition – Designed to lead. Built to last.
$65.00 - $68.00
-
Car Enhancements UK MK8 / MK8.5 Fiesta ST Look Steering Wheel Trim | Carbon Fibre Look | ST Logo
🏁 Carbon Fibre Look Steering Wheel Trim – MK8 Fiesta ST Upgrade your MK8 Fiesta’s interior with a sportier, more refined look using these carbon fibre look steering wheel surrounds featuring an embossed ST logo. Designed to transform your driving experience with premium aesthetics in minutes! ✅ Key Features: 💨 Aggressive ST Styling – Features embossed ST logo for a bold, performance-inspired finish 🧲 Perfect Fit for MK8 Fiesta (All Models) – Including ST, ST-Line, and base models 🛠 Easy Install – Pre-applied 3M adhesive tape for quick and secure fitment ✨ Durable Carbon Fibre Look – Sleek gloss effect transforms your steering wheel instantly 📘 Instructions Included – Step-by-step guide makes fitting hassle-free 📦 What’s Included: 1x Left trim piece 1x Right trim piece 1x Installation instructions Note: Will fit all MK8 Fiesta variants, but trim includes an embossed ST logo. 🚘 Vehicle Fitment: ✅ Ford Fiesta MK8 – 2017 to 2024 ✅ Fits all trims, including ST, ST-Line, Trend, Titanium, and more
$41.00 - $48.00
-
Car Enhancements UK MK8 / MK8.5 Ford Fiesta - Ultra Bright OEM Style Footwell Light Unit Upgrade
Enhanced Edition Footwell Light Unit – Ford Fiesta MK8 (2017–2024) | 12-SMD Plug & Play Replacement Bring your cabin to life with the CEUK Enhanced Edition Footwell Light Upgrade, now available as a complete direct-replacement unit for the Ford Fiesta MK8. Designed and built in the UK, this pioneering product redefines what footwell lighting should be. We’ve replaced the dull, single-chip OEM unit with a powerful 12-SMD LED board, delivering up to 12x more brightness, improved clarity, and an eye-catching glow that transforms your interior. 💡 What’s Upgraded? 12x SMD LEDs vs Ford’s basic 1-chip board Crystal-clear housing for uncompromised light output OEM-style fitment – no modification required 4 colour options available (Note: Green & Orange not available in OEM-style housing) Designed to disperse light evenly without glare while driving 🔌 When Do the Lights Work? When opening the doors When switching off the engine after driving When driving with headlights on When ambient lighting is active – integrates with factory light settings ✅ Confirmed Fitment: Ford Fiesta MK8 (2017–Present) – all trims including ST All MK8 models are pre-wired from factory – even if no footwell lights are installed Wiring is typically hidden in a hole under the footwell area, clipped behind the trim near the steering column. 📦 What’s Included: 2x Enhanced Edition Footwell Light Unit (Clear housing, 12-SMD LED) Plug-and-play connection 12-Month CEUK Warranty (or longer if stated on packaging – packaging must be retained) ⚠️ Important Note: Green and Orange LED colours are not currently available in the OEM-style housing. This is a replacement unit, not a clip-on or overlay. 🎥 Watch the Launch Video See the light in action and join thousands of Ford owners who have already been #Enhanced
$28.00 $25.00
-
Car Enhancements UK MK8 / MK8.5 Ford Fiesta Footwell Light Upgrade
#Enhanced Edition Footwell Light Upgrade – For MK8 / MK8.5 FiestaGive your interior a serious lighting upgrade with our ridiculously bright 12SMD Footwell Light Kit, purpose-built for the Ford Fiesta MK8 & MK8.5. Every MK8 Fiesta—yes, even base models—has the hidden wiring ready for footwell lighting. Simply locate the hole beneath your dashboard (driver & passenger side); the wiring is typically tucked behind the trim, ready to plug in. With up to 12x the brightness of OEM (which has just 1 SMD), this mod doesn't just illuminate—it transforms your cabin with ambient light in 6 vivid colour options (V1) and 4 OEM-matched shades (V2). ✨ How it Works: Your footwell lights activate in 3 key scenarios: 🚪 When you open your car doors 🛑 When you switch off the engine 🚗 While driving (mimics ambient lighting if headlights are on) 🆚 Choose Your Style: Version 1 – Aftermarket Look– 12SMD LED Panel with foam backing– Stick it wherever you like– Available in 6 colours: Red, White, Blue, Purple, Green, Orange Version 2 – OEM Style– Direct-fit replacement for factory unit– Pre-fitted with high-power LED chip board– Available in 4 colours: Red, White, Blue, Purple🚫 Note: Green & Orange not available in OEM unit 📦 What’s in the Box: 2x Footwell LED Light Units (V1 or V2 based on selection) Fitting instructions Foam adhesive (V1 only) 🔧 Quick Facts: ⚡ 12SMD Output – OEM has only 1SMD ✅ Plug-and-play – No coding or wiring required 🔋 Low power consumption 💪 CEUK Engineered & Tested 🎨 Multiple colours to match your vibe 🛡️ Warranty: Backed by our 12-month warranty. If the packaging states a longer term, please retain it for extended cover. 🧠 Pro Tip: Combine with CEUK ambient interior lighting upgrades for full #Enhanced interior transformation! Upgrade. Enhance. Illuminate.Have you been #Enhanced? 🔧✨
$14.00 - $25.00
-
Car Enhancements UK MK8 Fiesta - Front Cubby Hole Insert (NONE WIRELESS CHARGING)
🔧 MK8 Fiesta Cubby Insert Filler – Custom Logo Edition Add a unique touch to your interior with our CEUK cubby insert filler, designed specifically for the Ford Fiesta MK8 (2017+). This stylish insert fits perfectly in the tray space beneath the MMI – right in front of your gear stick. 🎨 Customisable & Clean Look Choose your own logo and colour to make your interior stand out! Whether you're going for subtle or bold, this insert adds a premium, personal touch to your cabin. ✅ Key Features: 🧩 Perfect fit for the MK8 Fiesta 🖌️ Custom logo in your chosen colour 🖤 Black acrylic insert with a clean gloss finish 🧲 Simple installation – sit loose or secure with included foam pad 🛠️ No tools or adhesive needed 📦 What's in the Box? 1x Black acrylic insert 1x Self-apply logo in your chosen colour 1x Foam sticky pad (optional for secure fit) 💡 Fitment: Compatible with Ford Fiesta MK8 (2017–Present) Designed for models with front cubby tray beneath the MMI unit(Please ensure your tray layout matches the example image on our site)
$17.00 $14.00
You have seen 48 out of 55 products