Products
-
Waveshare Waveshare CAN FD Protocol Converter CAN FD To ETH/RS232/RS485 Bidirectional Data Communication, CAN FD To ETH/RS232/RS485
1. The CAN FD ETH RS232/RS485 Converter is a DIN-rail mountable device designed for bidirectional conversion between CAN FD and Ethernet/RS485/RS232 interfaces. It features high speed, low latency, stable performance, ease of use, and excellent cost-effectiveness. Supporting five data conversion modes—Transparent, Transparent with ID, Standard Protocol, Modbus, and Custom Frame Header/Footer—it enables interconnection between CAN networks and Ethernet or serial devices and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. Built with an industrial-grade design, the device operates reliably within a temperature range of -40C to 85C and supports a wide power input range of 9V to 36V. It accommodates baud rates of 5 Kbps to 1 Mbps for the arbitration field and 100 Kbps to 5 Mbps for the data field.3. The device supports configuration via host-side software and features a built-in 120Ω bus resistor (selectable via DIP switch) and DIN-rail mounting capability, ensuring convenient and efficient setup and installation. Basic Specifications:1. Operating Voltage: DC 9V–36V2. Dimensions: 110 × 27 × 85.6 mm3. Mounting: DIN-rail mounting4. Reload Button: Long press to restore factory settings5. Indicators: POWER, WORK, COM, and CANInterface Specifications:1. CAN Port: 1 CAN port; supports CAN FD; compatible with CAN 2.0A/2.0B2. CAN Baud Rate: Arbitration phase: 5 Kbps–1 Mbps; Data phase: 100 Kbps–5 Mbps3. Termination Resistor: Two built-in 120Ω resistors; setting either DIP switch to ON connects one 120Ω resistor in parallel; setting both to ON connects two 120Ω resistors in parallel4. Ethernet Port: RJ45, 10/100 Mbps, auto-MDI/MDIX5. Serial Port: Supports one RS485 or RS232 connectionSoftware Functions:1. Modbus Gateway: Ethernet: CAN (FD) to Modbus TCP (Master/Slave); Serial: CAN (FD) to Modbus RTU (Master/Slave)2. Transmit Messages: Supports configuration of up to 64 transmit messages3. Receive Messages: Supports configuration of up to 64 receive messages4. Conversion Modes: Transparent conversion, transparent conversion with ID, standard conversion, Modbus conversion, and custom frame header/footer conversion5. CAN ID: Supports standard frames and extended frames6. Frame ID Filtering: Supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)7. Packetization (Frame Count/Time): Supports custom frame count and custom time interval for packetization (Ethernet port)8. Conversion Direction: Supports bidirectional conversion, Serial/Ethernet to CAN only, or CAN to Serial/Ethernet only9. Firmware Upgrade: Supports firmware upgrades via host software10. Parameter Configuration: AT commands Configuration via commands and host-side software11. Other functions: Supports heartbeat packets and registration packets; operating modes include normal, loopback, and listen-only (for the Ethernet port)Protection parameters:1. Electrostatic discharge (ESD) protection: Air discharge 8 kV, contact discharge 6 kV2. Electrical fast transient (EFT) immunity: Power circuit 2 kV; RS485/RS232 circuit 1 kV; CAN circuit 1 kV; Ethernet port circuit 1 kV3. Surge immunity test: Power circuit (differential mode 1 kV, common mode 2 kV); CAN circuit (common mode 2 kV); serial port circuit (common mode 2 kV); Ethernet port circuit (common mode 2 kV)Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 14cm * 12cm * 5cm / 5.51inch * 4.72inch * 1.97inch Qty per Carton 54 Carton Weight 9.20kgs / 20.28lb Carton Size 42cm * 32cm * 35cm / 16.54inch * 12.6inch * 13.78inch Loading Container 20GP: 566 cartons * 54 pcs = 30564 pcs40HQ: 1316 cartons * 54 pcs = 71064 pcs
£61.99
-
Waveshare Waveshare CAN FD Protocol Converter CAN FD To RS232/RS485 Bidirectional Data Communication, CAN FD To RS232/RS485
1. The CAN FD to RS232/RS485 converter is a DIN-rail mountable device designed for bidirectional data conversion between CAN FD and RS232/RS485 interfaces. It features high speed, low latency, stable performance, ease of use, and cost-effectiveness. It supports five data conversion modes—Transparent, Transparent with ID, Standard Protocol, Modbus, and Custom Frame Header/Footer—enabling interconnection between CAN and serial devices, while remaining compatible with CAN FD and CAN 2.0A/2.0B protocols.2. Built with an industrial-grade design, the device operates reliably within a temperature range of -40C to 85C and supports a wide input voltage range of 9V to 36V. It accommodates baud rates of 5 Kbps to 1 Mbps for the arbitration field and 100 Kbps to 5 Mbps for the data field.3. The device supports configuration via host software and features a built-in 120Ω bus resistor (selectable via DIP switch). Designed for DIN-rail mounting, it offers convenient configuration and efficient installation. Basic Parameters:1. Operating Voltage: DC 9V–36V2. Dimensions: 110 × 27 × 85.6 mm3. Mounting Method: DIN-rail mounting4. Reload Button: Long press to restore factory settings5. Indicators: POWER, WORK, COM, and CANInterface Parameters:1. CAN Port Specifications: 1 CAN port; supports CAN FD; compatible with CAN 2.0A/2.0B2. CAN Port Baud Rate: Arbitration phase: 5 Kbps–1 Mbps; Data phase: 100 Kbps–5 Mbps3. Termination Resistors: Two built-in 120Ω resistors; setting either DIP switch to ON connects one 120Ω resistor in parallel; setting both to ON connects two 120Ω resistors in parallel4. Serial Port Specifications: Supports one RS485 or RS232 connectionSoftware Functions:1. Modbus Gateway: CAN FD to Modbus RTU (Master/Slave)2. Transmit Messages: Supports configuration of up to 64 transmit messages3. Receive Messages: Supports configuration of up to 64 receive messages4. Conversion Modes: Transparent conversion, transparent conversion with ID, standard conversion, Modbus conversion, and custom frame header/footer conversion5. CAN ID: Supports standard frames and extended frames6. Frame ID Filtering: Supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)7. Conversion Direction: Supports bidirectional conversion, serial-to-CAN only, and CAN-to-serial only8. Firmware Upgrade: Supports firmware upgrades via host PC software9. Parameter Configuration: AT commands or host PC software configurationProtection Parameters:1. ESD Protection: Air discharge 8 kV, contact discharge 6 kV2. Electrical Fast Transient (EFT): Power circuit 2 kV; RS485/RS232 circuit 1 kV; CAN circuit 1 kV3. Surge immunity test: Power supply circuit—differential mode 1 kV, common mode 2 kV; CAN circuit—common mode 2 kV.Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 14cm * 12cm * 5cm / 5.51inch * 4.72inch * 1.97inch Qty per Carton 54 Carton Weight 9.20kgs / 20.28lb Carton Size 42cm * 32cm * 35cm / 16.54inch * 12.6inch * 13.78inch Loading Container 20GP: 566 cartons * 54 pcs = 30564 pcs40HQ: 1316 cartons * 54 pcs = 71064 pcs
£38.99
-
WAVESHARE WAVESHARE CM5 Dual Network Port Expansion Board Onboard USB 3.2 Gen1 X 2, Supports PoE Module Connection, 32580
1. Networking: 1000M Ethernet RJ45 interface; 2500M Ethernet RJ45 interface2. Connector: Raspberry Pi 40PIN GPIO interface3. USB: USB 3.2 Gen1 x 24. MIPI: 4-lane MIPI interface × 2 (22PIN 0.5mm FFC connector)5. Video: HDMI interface x 2, supports dual 4K output6. M.2: M.2 M KEY (PCIe Gen2/3 x1)7. M.2 (4G/5G): B KEY, supports 4G/5G communication module8. Storage: Onboard Micro SD card slot (for CM5 versions without eMMC)9. Fan Interface: 5V, 4PIN JST-SH PWM fan connector10. Power Input: 7V ~36V wide voltage (round terminal), 5V 5A (Type-C)11. Supports 4-screen display, with added MIPI DSI driver; the system will default to connecting to the screens regardless of whether they are connected, and the screens will display in split-screen mode (this depends on the system version).12. Dimensions: 99.60 x 87.00 mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 12cm * 4cm / 4.72inch * 4.72inch * 1.57inch Qty per Carton 96 Carton Weight 6.90kgs / 15.21lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 96 pcs = 39552 pcs40HQ: 958 cartons * 96 pcs = 91968 pcs
£58.99
-
WAVESHARE WAVESHARE CM5-To-Pi5-Adapter For Raspberry Pi 5 CM5 To Pi 5 Adapter Board Supports Connecting To Microphone, 32049
1. CM5 card slot: compatible with all versions of Compute Module 52. Networking: gigabit ethernet RJ45 port3. Connectors: 16-pin PCIe (PCIe Gen2/3 x 1) Raspberry Pi 40-pin GPIO interface4. USB: USB 3.2 Gen1 x 2; USB 2.0 x 25. MIPI: 4-lane MIPI interface × 2 (22-pin 0.5mm FFC connector)6. Video: HDMI interface x 2, supporting dual 4K output7. Audio: compatible with standard 3.5mm headphone jacks for audio input/output via accessory module8. Storage: onboard Micro SD card slot (For CM5 versions without eMMC)9. Fan Interface: 5V, 4-pin JST-SH PWM fan connector10. Power Input: DC 5V 5A11. Onboard 40-pin GPIO interface and standard CM5 connector, supporting Compute Module 5 Lite / eMMC series core boards12. Onboard USB audio decoder chip, supports microphone connection13. Size: about 8.5 x 5.6 cmPackage contents:- CM5-to-Pi5-Adapter x 1- Audio-Adapter x 1- MX1.25 4-pin dual-ended cable (approx. 200mm) x 1- Screw set x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 7cm * 3cm / 3.94inch * 2.76inch * 1.18inch Qty per Carton 160 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 37cm * 35cm / 19.69inch * 14.57inch * 13.78inch Loading Container 20GP: 411 cartons * 160 pcs = 65760 pcs40HQ: 956 cartons * 160 pcs = 152960 pcs
£23.99
-
WAVESHARE Waveshare Compute Module Dual Gigabit Ethernet Base Board for Raspberry Pi CM4, For Raspberry Pi CM4
1. CM4 socket: Suitable for all variants of Compute Module 4 2. Ethernet: Dual Gigabit Ethernet RJ45 3. USB: USB 3.2 Gen1 x 3 4. PIN header: 40PIN GPIO header x 1 5. HD media interface: HD-MI x 2, supports 4K 30fps output 6. DSI display: MIPI DSI display port x 1, 15pin 1.0mm FPC connector 7. CSI camera: MIPI CSI-2 camera port x 2, 15pin 1.0mm FPC connector 8. Power input: 7V-36V 9. FAN: 5V/12V, allows speed adjustment and measurement 10. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variantsSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.80kgs / 39.24lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£44.99
-
Waveshare Waveshare DA7212 I2S Audio HAT Type B For Raspberry Pi Onboard Speaker Headers And EEPROM Chip
1. Based on Raspberry Pi 40PIN GPIO header, suitable for Raspberry Pi series boards.2. Adopts DA7212 professional stereo codec chip, controlled via I2C interface and transmitting audio via I2S interface.3. Onboard standard 3.5mm headphone jack for music playback with external headphones.4. Integrated dual-speaker design, suitable for multi-scenario applications.5. Onboard dual microphones for recording without requiring additional equipment.6. Onboard customizable function buttons and customizable function indicator lights.7. Supports sample rates up to 96kHz.8. Supports resolution up to 24-bit.Parameters:1. Audio Codec Chip: DA72122. DAC SNR: 100dB3. Supply Voltage: 5V4. ADC SNR: 90dB5. Logic Voltage: 3.3V6. Headphone Driver: 160mW (16 ohms at 5V)7. Control Interface: I2C8. Speaker Driver: 2.6W per channel (4 ohms BTL)9. Audio Interface: I2SSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 6cm * 5cm / 3.94inch * 2.36inch * 1.97inch Qty per Carton 120 Carton Weight 8.30kgs / 18.30lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 120 pcs = 74400 pcs40HQ: 1439 cartons * 120 pcs = 172680 pcs
£18.99
-
Waveshare Waveshare DDSM350-CT High-Speed Direct-Drive Servo Motor With Integrated Driver 350rpm, 35594
**Product Features:**1. This product is an integrated servo hub motor featuring a compact 4.5-inch outer diameter design. It highly integrates an outer rotor brushless motor, a high-precision encoder, and a servo driver. Easy to install, it is suitable for direct-drive applications such as robot joints, small AGVs, and service robots.2. Ultra-low noise3. High precision with zero backlash4. Fast response, direct drive without delay5. Integrated motor and driver design, compact structure, and high level of integration6. Supports CAN + TTL232 communication interface7. Motor position, speed, current, fault codes, and other information can be obtained via communication8. Equipped with over-current, over-load, and over-temperature protection functions9. High protection level, resistant to dust and axial impacts**Product Specifications:**1. Total weight: 1286 +/- 10 g2. Operating temperature: -10 to 40 degrees C3. Rated speed: 270 rpm4. Encoder resolution: 12 bit5. No-load speed: 350 rpm6. Peak current: 5.8 A7. Rated torque: 1.1 Nm8. Rated current: 2.2 A9. Peak torque: 3 Nm10. Noise level: <= 60 dB11. Torque constant: 0.5 Nm/A12. Rated voltage: 24V DCSpecification: Package Weight One Package Weight 1.35kgs / 2.99lb One Package Size 15cm * 15cm * 8cm / 5.91inch * 5.91inch * 3.15inch Qty per Carton 20 Carton Weight 27.10kgs / 59.74lb Carton Size 32cm * 32cm * 42cm / 12.6inch * 12.6inch * 16.54inch Loading Container 20GP: 620 cartons * 20 pcs = 12400 pcs40HQ: 1439 cartons * 20 pcs = 28780 pcs
£109.99
-
WAVESHARE WAVESHARE Direct-Drive Servo Motor An Integrated Low-Noise Direct-Drive Hub Motor, DDSM315
Features At A Glance:Ultra low noiseHigh precision and zero-backlashFast response, direct drive without delayIntegrated motor and driver, compact structure and high integrationSupports LIN bus communicationSupports obtaining motor feedback information through communication such as position, speed, current, error code, etc.With Hall position detection, over-current protection, etc.Supports electric brakeNo drive mechanical friction, drive efficiency close to 99.99%No-load speed: 400±20RPM Operating temperature: -5℃ ~ 40℃No-load current: 0.25A Total weight: 236gRated speed: 100RPM Encoder resolution: 12bitRated torque: 0.15Nm Rated current: 0.24±0.07ALocked-rotor torque: 0.3Nm Noise level: 45dB(A)Torque constant: 0.3Nm/AInput voltage: 25.2V DCLocked-rotor current: 1.0±0.2A Speed constant: 15.9RPM/VSpecification: Package Weight One Package Weight 0.36kgs / 0.80lb One Package Size 10cm * 10cm * 6cm / 3.94inch * 3.94inch * 2.36inch Qty per Carton 60 Carton Weight 22.70kgs / 50.04lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 60 pcs = 37200 pcs40HQ: 1439 cartons * 60 pcs = 86340 pcs
£52.99
-
Waveshare Waveshare DSI Round Capacitive Touch Display IPS Display Panel 10-Point Touch, 3.4 inch, 4 inch
1. It supports 10-point touch. The actual number of touch points depends on the software system2. The tempered glass panel has a hardness of 6H3. The screen is fully adhered, providing excellent display and dust-proof performance4. The IPS display panel offers excellent display performance with a viewing angle of up to 170°5. It is widely applicable and can be used in smart home, vehicle-mounted devices, consumer electronics, industrial equipment, and other fieldsParameters1. Contrast ratio: 1200:12. Display chip: JD93653. Touch chip: GT9284. Communication interface: 2-lane MIPI DSI5. Operating temperature: 0℃ - 60℃6. Resolution: 3.4 inches: 800 x 800 pixels (H x V); 4 inches: 720 x 720 pixels (H x V)7. Color gamut: 3.4 inches: 70% NTSC; 4 inches: 60% NTSC8. Brightness: 3.4 inches: 300cd/square meter; 4 inches: 550cd/square meter9. Dimensions: 3.4 inches: 11.5 x 11.5 cm; 4 inches: 12.6 x 12.6 cm10. Display size: 3.4 inches: 8.76 x 8.76 cm; 4 inches: 10.152 x 10.152 cmPackaging list:- Display screen x 1- Screw pack x 1- MX1.25 2PIN to MX1.25 4PIN 150mm x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2PIN to 2.54 3PIN connecting cable x 1- FFC 22PIN crossover cable (opposite direction) x 2Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 15cm * 4cm / 5.91inch * 5.91inch * 1.57inch Qty per Carton 48 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 48 pcs = 24960 pcs40HQ: 1209 cartons * 48 pcs = 58032 pcs
£60.99 - £69.99
-
WAVESHARE Waveshare Dual Gigabit Ethernet 5G / 4G Base Board for Raspberry Pi CM4
Specifications1. CM4 socket: Suitable for all variants of Compute Module 4 2. Network: - Ethernet: Dual Gigabit Ethernet RJ45 - M.2 B KEY, for connecting 5G / 4G module - Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication 3. USB 3.2 Gen1 x 2 4. PIN header: Raspberry Pi 40PIN GPIO headerx 1 5. Display: MIPI DSI port (15pin 1.0mm FPC connector) 6. Camera: MIPI CSI-2 port x 2 (15pin 1.0mm FPC connector) 7. Video: HDMI x 2, supports 4K 30fps output 8. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 9. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 10. Fan header: 5V/12V (12V by default), allows speed adjustment and measurement 11. Power input: 5V/2.5A 12. Size: 99.6 x 87.0mmSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.80kgs / 39.24lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£45.99
-
WAVESHARE WAVESHARE ESP32 Microcontroller WiFi Development Board 32-Bit LX6 Dual-Core Processor, WROOM-32E-N4, WROOM-32UE-N16, WROVER-E-N16R8, WROVER-IE-N16R8
1. Utilizing the ESP32 module, equipped with the Xtensa 32-bit LX6 dual-core processor, with a main frequency of up to 240 MHz2. Integrating 520KB SRAM and 448KB ROM, with the option of PSRAM and Flash memory versions3. Supporting 2.4GHz Wi-Fi, classic Bluetooth, and low-power Bluetooth wireless communication4. Using the USB Type-C interface, supporting both forward and reverse insertion, facilitating power supply, program download, and serial port debugging5. Onboard the CH343P USB to UART chip, providing stable and reliable serial communication6. Supports both USB Type-C and lithium battery power supply methods, and can automatically switch the power source7. Exposing a rich set of peripheral interfaces, with pin compatibility for the ESP32-DevKitC development board, offering strong compatibility and expandability8. Stamps hole design, allowing for direct soldering integration onto the user self-designed baseboardSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 9cm * 6cm * 3cm / 3.54inch * 2.36inch * 1.18inch Qty per Carton 330 Carton Weight 8.00kgs / 17.64lb Carton Size 47cm * 38cm * 35cm / 18.5inch * 14.96inch * 13.78inch Loading Container 20GP: 426 cartons * 330 pcs = 140580 pcs40HQ: 990 cartons * 330 pcs = 326700 pcs
£7.99 - £9.99
-
Waveshare Waveshare ESP32-C5 1.47inch 262K Color LCD Display Development Board Supports Wi-Fi 6 And Bluetooth 5, Without Headers, With Pre-soldered Headers
Specification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 7cm * 4cm / 3.94inch * 2.76inch * 1.57inch Qty per Carton 200 Carton Weight 19.10kgs / 42.11lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 200 pcs = 107200 pcs40HQ: 1244 cartons * 200 pcs = 248800 pcs
£12.99 - £13.99
-
WAVESHARE WAVESHARE ESP32-C5 2.73 Inch LCD Display Development Board, 32-Bit RISC-V Processor, Supports Dual-Band 2.4GHz / 5GHz Wi-Fi And Bluetooth 5, 35225
1. Display Panel: LCD 2. Display Size: 2.73 inch3. Display Resolution: 320 x 320 pixels 4. Display Brightness: 620 cd/square meters5. Display Colors: 262K6. Contrast Ratio: 1200:17. Communication Interface: SPI8. Driver IC: ILI94889. Dimensions: Approx. 68 x 68 mmFeatures:1. Equipped with a high-performance ESP32-C5 RISC-V 32-bit single-core processor with a clock speed of up to 240 MHz 2. Features 384 KB of SRAM and 320 KB of ROM, along with 8 MB of on-board PSRAM and 32 MB of Flash, meeting the needs of program execution, graphical interfaces, and data storage 3. Integrates dual-band 2.4GHz and 5GHz Wi-Fi, Bluetooth 5.0 (LE), and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, with excellent RF performance4. Features a built-in 2.73-inch LCD display for displaying graphical interfaces, status information, data curves, and more 5. Three onboard customizable buttons facilitate various functions such as menu navigation, parameter configuration, and human-machine interaction6. Onboard TF card slot supports external storage expansion for storing images, logs, configuration files, or acquired data7. On-board lithium battery charge management chip, supporting the development of portable and battery-powered applications8. On-board six-axis sensor (three-axis accelerometer and three-axis gyroscope), usable for attitude detection and interactive control9. On-board RTC (Real-Time Clock), supporting applications such as time logging and offline timing10. On-board temperature and humidity sensor, suitable for environmental data acquisition and monitoring11. Features a USB Type-C interface for convenient power supply, program download, and debugging12. Supports development environments such as ESP-IDF and Arduino, with extensive documentation and an easy learning curve13. Provides multiple GPIO pins and peripheral interfaces for easy connection to sensors, actuators, and other modulesSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 9cm * 3cm / 4.33inch * 3.54inch * 1.18inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 48cm * 33cm * 20cm / 18.9inch * 12.99inch * 7.87inch Loading Container 20GP: 841 cartons * 100 pcs = 84100 pcs40HQ: 1954 cartons * 100 pcs = 195400 pcs
£22.99
-
Waveshare Waveshare ESP32-C5 3.5inch Rounded Corner LCD Development Board, IPS Panel, 320 × 480 Resolution, 262K Color, Without Camera, With Built-in Camera
1. ESP32-C5-Touch-LCD-3.5 is a microcontroller development board designed by Waveshare. Onboard 3.5-inch LCD screen, power management chip, 6-axis sensor, temperature and humidity sensor, Micro SD card slot, etc., providing hardware foundation for display, sensing, voice, and multimedia storage. Relying on these hardware, the product can connect to online AI LLM platforms to achieve intelligent voice interaction and visual interaction.2. Adopts ESP32-C5-WROOM-1U series module, equipped with a RISC-V 32-bit processor, main frequency up to 240 MHz.3. Integrated 384 KB SRAM, 320 KB ROM, 8 MB PSRAM, and 32 MB Flash, meeting the needs for program execution, graphical user interfaces, and data storage.4. Integrated 2.4 GHz and 5 GHz dual-band Wi-Fi, Bluetooth 5 (LE), and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, featuring excellent RF performance.5. Onboard camera interface, supporting BF3901 camera.6. Onboard battery charge management module, with a reserved 3.7V MX1.25 lithium battery interface for external battery power supply.7. Uses Type-C interface, improving user convenience and device compatibility.8. Onboard 3.5-inch capacitive touch HD IPS screen, 320 x 480 resolution, 262K colors, capable of displaying color images clearly.9. Built-in ST7796 driver chip and FT6336 capacitive touch chip, using SPI and I2C interfaces for communication respectively, saving interface pin resources.10. Leads out UART, I2C, and some IO interfaces, integrated full-speed USB serial port.11. Onboard QMI8658 6-axis sensor, RTC clock sensor, SHTC3 temperature and humidity sensor, and TF card slot, etc.12. Onboard PWR and BOOT customizable side buttons, convenient for custom feature development using buttons.13. Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker, easily playing with Xiaozhi AI.14. Supports ESP-IDF / Arduino development environments, rich resources, easy to get started.LCD Screen Specifications:1. Display panel: IPS2. Display size: 3.5 inch3. Display resolution: 320 x 480 pixels4. Display color: 262K5. Display brightness: 450 cd/m26. Contrast ratio: 1100:17. Communication interface: SPI8. Driver IC: ST77969. Touch type: Capacitive sensing10. Touch IC: FT6336Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 13cm * 10cm * 5cm / 5.12inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 14.00kgs / 30.86lb Carton Size 45cm * 26cm * 38cm / 17.72inch * 10.24inch * 14.96inch Loading Container 20GP: 599 cartons * 100 pcs = 59900 pcs40HQ: 1392 cartons * 100 pcs = 139200 pcs
£31.99 - £35.99
-
Waveshare Waveshare ESP32-C5 Dual-Band Wi-Fi 6 Development Board 240MHz Single-Core Processor, Without Pinheader, With Pinheader
1. Uses ESP32-C5-MINI-1 series module as the main controller, powered by a RISC-V 32-bit single-core processor with main frequency up to 240 MHz.2. Integrates 320 KB ROM, 384 KB HP SRAM, 16 KB LP SRAM, and 4 MB Flash memory.3. Supports 2.4 GHz and 5 GHz dual-band Wi-Fi 6, Bluetooth 5 (LE), and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication with excellent RF performance.4. Utilizes a USB Type-C interface, eliminating worry about plug orientation, and supporting convenient power supply, development, and debugging.5. Onboard MP1605GTF-Z high-efficiency DC-DC power supply chip, delivering load current up to 2A.6. Onboard ETA6098 power management circuit, supporting lithium battery power supply, charging status indication, and battery voltage sampling.7. Routes out multiple GPIOs and expands 6 additional IOs via TCA9554 for easy peripheral connection. Features rich peripheral interfaces including USB, UART, I2C, SPI, ADC, and PWM for flexible functional implementations.8. Stamp-hole (castellated hole) design allows direct soldering and integration onto user-designed baseboards.9. Supports multiple low-power operating modes to balance communication distance, data rate, and power consumption, meeting energy requirements for various application scenarios.10. Compatible with most of the Raspberry Pi Pico expansion board ecosystem, ideal for AIoT (Artificial Intelligence of Things) application development.Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 3.50kgs / 7.72lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 120 pcs = 64320 pcs40HQ: 1244 cartons * 120 pcs = 149280 pcs
£8.99 - £9.99
-
Waveshare Waveshare ESP32-C5 Dual-Band Wi-Fi 6 Development Board External FPC Antenna, Without Pinheader, With Pinheader
1. Uses ESP32-C5-MINI-1 series module as the main controller, powered by a RISC-V 32-bit single-core processor with main frequency up to 240 MHz.2. Integrates 320 KB ROM, 384 KB HP SRAM, 16 KB LP SRAM, and 4 MB Flash memory.3. Supports 2.4 GHz and 5 GHz dual-band Wi-Fi 6, Bluetooth 5 (LE), and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication with excellent RF performance.4. Utilizes a USB Type-C interface, eliminating worry about plug orientation, and supporting convenient power supply, development, and debugging.5. Onboard MP1605GTF-Z high-efficiency DC-DC power supply chip, delivering load current up to 2A.6. Onboard ETA6098 power management circuit, supporting lithium battery power supply, charging status indication, and battery voltage sampling.7. Routes out multiple GPIOs and expands 6 additional IOs via TCA9554 for easy peripheral connection. Features rich peripheral interfaces including USB, UART, I2C, SPI, ADC, and PWM for flexible functional implementations.8. Stamp-hole (castellated hole) design allows direct soldering and integration onto user-designed baseboards.9. Supports multiple low-power operating modes to balance communication distance, data rate, and power consumption, meeting energy requirements for various application scenarios.10. Compatible with most of the Raspberry Pi Pico expansion board ecosystem, ideal for AIoT (Artificial Intelligence of Things) application development.FPC Dual-Band Wi-Fi Antenna Parameters:1. Frequency Range: 2400-2500 MHz / 5200-5800 MHz2. Max Power: 5W3. Antenna Dimensions: 48.0 x 10.0 x 0.2 mm4. Cable Length: 80 mm5. VSWR: Less than 36. Connector Specification: IPEX Generation 47. Peak Gain: 6.49 dBi (2.4G band) / 8.24 dBi (5.8G band)8. Antenna Material: FPC9. Output Impedance: 50 ohms10. Operating Temperature: -30 to +80 degrees Celsius11. Polarization Type: Vertical12. Radiation Direction: OmnidirectionalSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 3.50kgs / 7.72lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 120 pcs = 64320 pcs40HQ: 1244 cartons * 120 pcs = 149280 pcs
£8.99 - £9.99
-
Waveshare Waveshare ESP32-C6 0.85inch LCD Display Development Board, RISC-V Single-Core Processor, 128 × 128 Resolution, Supports AI Speech Interaction, 34519
1. The ESP32-C6-LCD-0.85 is a microcontroller development board supporting 2.4GHz Wi-Fi 6 and Bluetooth BLE 5. It features a custom-molded, compact, and stylish square plastic housing with a premium feel. The board integrates peripherals such as a 0.85-inch IPS color LCD, a Micro SD card slot, eight RGB LEDs, and a low-power audio codec chip, facilitating the development of multimedia and interactive applications. With these hardware resources, the board supports functions like image display, audio playback, and lighting control, making it suitable for both rapid prototyping and integration into end products for customization and further development. 2. Powered by the high-performance ESP32-C6 32-bit RISC-V processor, with a clock speed of up to 160 MHz3. Integrates Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless connectivity; features an onboard antenna and excellent RF performance4. Built-in 512 KB SRAM, 320 KB ROM, and 8 MB Flash5. Uses a Type-C interface for enhanced user convenience and device compatibility6. Onboard 0.85-inch LCD screen with 128 × 128 resolution and 65K colors7. Onboard ring of 8 RGB LEDs, programmable for various dynamic lighting effects8. Onboard 3.7V MX1.25 interface for lithium battery charging and discharging9. Breakout pads for I2C, UART, etc., enabling connection to external devices, debugging, and flexible peripheral configuration10. Onboard Micro SD card slot providing expandable storage, fast data transfer, and flexibility; suitable for data logging and media playback, simplifying circuit design11. Includes onboard ES8311 audio codec chip, dual-microphone module, and other resourcesLCD Screen Specifications:1. Display resolution: 128 × 128 pixels2. Display colors: 65K3. Display panel: IPS4. Pixel pitch: 39.6 × 118.8 μm5. Interface type: 4-wire SPI6. Driver IC: ST77357. Display size: 15.21 × 15.21 mmSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 8cm * 8cm * 6cm / 3.15inch * 3.15inch * 2.36inch Qty per Carton 144 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 144 pcs = 59328 pcs40HQ: 958 cartons * 144 pcs = 137952 pcs
£13.99
-
Waveshare Waveshare ESP32-C6 1.28inch LCD Display Development Board, 240 × 240 Resolution, 65K Color, Without Case, With Metal Case
1. Powered by ESP32-C6 high-performance 32-bit RISC-V processor with main frequency up to 160 MHz.2. Integrates Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, delivering excellent RF performance.3. Built-in 512 KB HP SRAM, 16 KB LP SRAM, and 320 KB ROM, with external 16 MB Flash memory.4. Uses a Type-C connector, eliminating worry about plug orientation.5. Onboard 1.28-inch capacitive LCD screen with 240 x 240 resolution and 65K color for clear displaying of colorful images.6. CNC metal top enclosure paired with an acrylic frosted back plate (optional).7. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope).8. Onboard PCF85063 RTC chip for easy implementation of Real-Time Clock functions.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. Onboard SH1.0 14-PIN expansion header, routing out 6 GPIOs, 1 UART, and 1 I2C.11. Onboard MicroSD (TF) card slot for storage expansion and high-speed data transfer, enhancing flexibility.LCD Parameters:1. Display Panel: IPS2. Display Size: 1.28 inches3. Display Resolution: 240 x 240 pixels4. Display Colors: 65K5. Display Brightness: 400 cd/m26. Contrast Ratio: 1100:17. Communication Interface: SPI8. Driver IC: GC9A01ASpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 160 Carton Weight 9.10kgs / 20.06lb Carton Size 30cm * 37cm * 42cm / 11.81inch * 14.57inch * 16.54inch Loading Container 20GP: 572 cartons * 160 pcs = 91520 pcs40HQ: 1327 cartons * 160 pcs = 212320 pcs
£14.99 - £19.99
-
Waveshare Waveshare ESP32-C6 1.28inch Touch LCD Display Development Board, 240 × 240 Resolution, 65K Color, Without Metal Case, With Metal Case
1. Powered by ESP32-C6 high-performance 32-bit RISC-V processor, with clock speed up to 160MHz.2. Integrated Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication with excellent RF performance.3. Built-in 512KB HP SRAM, 16KB LP SRAM, and 320KB ROM, with external 16MB Flash memory.4. Equipped with a Type-C interface, supporting reversible plug orientation for convenient use.5. Onboard 1.28-inch capacitive touch LCD screen with 240 x 240 resolution and 65K colors, capable of clearly displaying colorful images.6. Top case made of CNC metal material, with an acrylic frosted back plate on the rear (optional).7. Onboard QMI8658 6-axis Inertial Measurement Unit (3-axis accelerometer, 3-axis gyroscope).8. Onboard PCF85063 RTC chip to easily meet RTC functional requirements.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. Onboard SH1.0 12PIN expansion interface, exposing 4 GPIOs, 1 UART, and 1 I2C.11. Onboard TF card slot for storage expansion and high-speed data transmission, enhancing operational flexibility.LCD Screen Parameters:1. Display Panel: IPS2. Display Size: 1.28 inch3. Resolution: 240 x 240 pixels4. Display Colors: 65K5. Brightness: 400 cd/m26. Contrast Ratio: 1100:17. Communication Interface: SPI8. Driver IC: GC9A01A9. Touch Support: Yes10. Touch IC: CST816SSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 160 Carton Weight 9.10kgs / 20.06lb Carton Size 30cm * 37cm * 42cm / 11.81inch * 14.57inch * 16.54inch Loading Container 20GP: 572 cartons * 160 pcs = 91520 pcs40HQ: 1327 cartons * 160 pcs = 212320 pcs
£20.99 - £25.99
-
WAVESHARE WAVESHARE ESP32-C6 1.3-Inch LCD Display Development Board, Without Pin Header, With Soldered Pin Header
1. Display panel: IPS2. Display size: 1.3 inches3. Display resolution: 240 x 240 pixels4. Display colors: 262K5. Communication interface: SPI6. Driver IC: ST77897. The ESP32-C6 is designed for the AIoT market, featuring a high-performance RISC-V 32-bit processor and a low-power RISC-V 32-bit processor.8. Supports Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread). Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh.9. Supports ESP-IDF and Arduino, and comes with a complete SDK and open-source tutorials for easy learning and quick integration into applications.Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 7cm * 7cm * 4cm / 2.76inch * 2.76inch * 1.57inch Qty per Carton 280 Carton Weight 23.50kgs / 51.81lb Carton Size 51cm * 37cm * 34cm / 20.08inch * 14.57inch * 13.39inch Loading Container 20GP: 415 cartons * 280 pcs = 116200 pcs40HQ: 964 cartons * 280 pcs = 269920 pcs
£10.99 - £11.99
-
Waveshare Waveshare ESP32-C6 1.54-Inch LCD Development Board 240×240 Resolution Supports Dual Microphones, Non-touch Control, Touch Control
1. Equipped with a high-performance ESP32-C6 32-bit RISC-V processor with a clock speed of up to 160MHz.2. Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5, and integrates an onboard antenna for excellent RF performance.3. Built-in 512KB SRAM and 320KB ROM, with an external 16MB Flash memory.4. Uses a Type-C interface, eliminating the hassle of reversible insertion and improving user convenience and device compatibility.5. Onboard 1.54-inch capacitive LCD screen with 240 × 240 resolution and 262K color, capable of clearly displaying color images.6. Onboard ES7210 audio codec chip, supporting dual-microphone audio capture.7. Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker.8. Onboard QMI8658. 9. Six-axis inertial measurement unit (3-axis accelerometer, 3-axis gyroscope) for motion attitude detection and expanded applications.10. Built-in ST7789 driver chip for SPI interface communication.11. Built-in CST816 capacitive touch chip for I2C interface communication (touch version only).12. Onboard PLUS and BOOT buttons with customizable functions for easy custom function development.13. Onboard 3.7V MX1.25 lithium battery charging/discharging interface.14. One I2C, one UART, and one USB pad are provided for external device connection and debugging, allowing for flexible configuration of peripheral functions.15. Onboard Micro SD card slot supports storage expansion and fast data transfer, facilitating data recording and media playback, and simplifying system circuit design.16. Display resolution: 240 x 240 pixels.17. Display colors: 262K. Communication Interface: 4-wire SPI18. Driver IC: ST778919. Effective Screen Size: 27.72 x 27.72 mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 126 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 126 pcs = 56700 pcs40HQ: 1045 cartons * 126 pcs = 131670 pcs
£14.99 - £17.99
-
Waveshare Waveshare ESP32-C6 1.54inch E-Paper AIoT Development Board 200 × 200 Resolution Supports Wi-Fi, BLE 5, 34394
1. The ESP32-C6-ePaper-1.54 is an e-Paper AIoT development board, equipped with ESP32-C6 microcontroller, which supports Wi-Fi and BLE dual-mode communication. Onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge management circuit. Reserved interfaces including USB, UART, I2C, and GPIO for easy functionality expansion and sensor connectivity, providing a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications.2. Equipped with high-performance ESP32-C6 32-bit RISC-V processor, up to 160MHz main frequency3. Supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance4. Built-in 512KB HP Static RAM, 16KB LP Static RAM, 320KB ROM, and external 16MB Flash memory5. Onboard 1.54inch e-paper display, 200 × 200 resolution, features high contrast and wide viewing angle6. Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications7. Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring8. Onboard TF card slot for external storage of images or files9. Onboard programmable PWR and BOOT side buttons for customized function development10. Reserved 2 × 6 2.54mm pitch pin header for convenient external expansionSpecifications:1. Display Panel: E-Ink display2. Display Size: 1.54 inches3. Resolution: 200 × 2004. Grayscale Levels: 25. Communication Interface: SPI6. Full Refresh Time: 2s7. Display Colors: Black, White8. Partial Refresh Time: 0.3s9. Viewing Angle: Greater than 170-degree10. Display Mode: ReflectiveSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs40HQ: 1186 cartons * 180 pcs = 213480 pcs
£17.99
-
Waveshare Waveshare ESP32-C6 1.64 Inch AMOLED Touch Display Development Board, 280 X 456 Resolution, Supports Wi-Fi 6 And BLE 5, Not Welded, Welded
1. Equipped with a high-performance RISC-V 32-bit processor and a low-power RISC-V 32-bit processor, the high-performance processor has a clock speed up to 160 MHz, while the low-power processor can reach up to 20 MHz2. Integrated with Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, it has excellent radio frequency performance. 3. The board is equipped with an internal antenna and reserved solder pads, allowing it to be configured as an external antenna4. Onboard 320KB ROM, 512KB HP SRAM, 16KB LP SRAM, and an external 16MB Flash5. Onboard a 1.64-inch AMOLED capacitive touch screen with a resolution of 280 x 456 and 16.7M color6. The AMOLED screen uses the QSPI interface for display, and the capacitive touch uses the I2C interface7. Onboard a QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), which can detect motion posture and count steps, etc8. Onboard PWR and BOOT side buttons, BOOT supports custom key functions, making development more flexible9. Onboard a 3.7V MX1.25 lithium battery charging and discharging interface10. Onboard a Micro SD card slot, allowing external SD card storage for pictures or files11. Onboard a USB Type-C interface, which can be used for power supply and download debugging, facilitating development12. Exposed I2C, UART, and USB pins, available for external devices and debugging, allowing flexible configuration of peripheral functions13. The screen adopts a CNC processing structure with edge bonding, featuring a delicate and soft texture, and overall beauty and durabilityAMOLED screen parameters1. Display panel: AMOLED2. Display resolution: 280 x 456 pixels3. Display brightness: 350 cd/square meter4. Communication interface: QSPI5. Touch: supported6. Display size: 1.64 inches7. Display colors: 16.7M8. Contrast ratio: 60000:19. Driving IC: CO530010. Touch IC: FT6146Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 6cm * 4cm / 3.15inch * 2.36inch * 1.57inch Qty per Carton 288 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 288 pcs = 118656 pcs40HQ: 958 cartons * 288 pcs = 275904 pcs
£25.99 - £26.99
-
Waveshare Waveshare ESP32-C6 2.73inch LCD Display Development Board RISC-V 32-Bit Processor, 320 × 320 Resolution, 35302
1. This microcontroller development board integrates a 2.73-inch LCD display, three user-customizable buttons, a TF card slot, a lithium battery charge management chip, a 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), an RTC real-time clock, a temperature and humidity sensor, and other peripheral resources into a compact form factor. It meets various application needs such as GUI display, button interaction, data logging, posture detection, environmental sensing, and battery power supply, making it convenient for developers to quickly build and embed into actual products.2. Powered by the ESP32-C6 high-performance 32-bit RISC-V processor, with a main frequency up to 160MHz.3. Supports Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, featuring excellent RF performance with an onboard antenna.4. Built-in 512KB HP SRAM, 16KB LP SRAM, and 320KB ROM, with external 16MB Flash.5. Onboard 2.73-inch LCD display, usable for graphical interfaces, status information, data curves, and other visual content.6. Onboard three user-customizable buttons, facilitating menu switching, parameter settings, human-machine interaction, and other functions.7. Onboard TF card slot, supporting external storage expansion for images, logs, configuration files, or collected data storage.8. Onboard lithium battery charge management chip, supporting portable battery-powered application development.9. Onboard 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), applicable for posture detection and interactive control.10. Onboard RTC real-time clock, supporting time logging, offline timing, and related applications.11. Onboard temperature and humidity sensor, usable for environmental data collection and monitoring.12. Adopts USB Type-C interface for convenient power supply, program flashing, and debugging.13. Supports development environments such as ESP-IDF / Arduino, rich in resources and easy to get started with.14. Leads out multiple GPIOs and peripheral interfaces for convenient connection to sensors, actuators, and other modules.LCD Screen Parameters:1. Display Panel: LCD2. Display Size: 2.73 inch3. Display Resolution: 320 x 320 pixels4. Display Colors: 262K5. Display Brightness: 620cd/m26. Contrast Ratio: 1200 : 17. Communication Interface: SPI8. Driver IC: ILI9488Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 7cm * 3cm / 3.94inch * 2.76inch * 1.18inch Qty per Carton 100 Carton Weight 5.60kgs / 12.35lb Carton Size 42cm * 32cm * 22cm / 16.54inch * 12.6inch * 8.66inch Loading Container 20GP: 901 cartons * 100 pcs = 90100 pcs40HQ: 2093 cartons * 100 pcs = 209300 pcs
£20.99
You have seen 216 out of 290 products