Suchergebnisse für "control module"

1. Based on the RP2350 main control chip, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. 12 programmable I/O (PIO) state machines for custom peripheral support.4. Built-in 520KB SRAM and 16MB on-chip Flash, using a Type-C interface for easy connection.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage, requiring no additional power supply at the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easily monitoring the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easily monitoring the devices operating status.14. DIN rail mountable ABS protective casing for easy installation and enhanced safety.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Can be recognized as a mass storage device via USB for drag-and-drop program downloading. 18. Provides 34 multi-functional GPIO pins19. Pins include 1 HSTX, 2 I2C, 2 UART, 8 12-bit ADC, and 24 controllable PWM channelsProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled by jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power dupply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs

Lesen Sie Mehr Weniger

1. Based on the RP2350 main controller, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. Equipped with a Raspberry Pi Radio Module 2, supporting Wi-Fi 4 wireless network and Bluetooth 5.2 (Wi-Fi module version only).4. Built-in 520KB SRAM and 16MB on-chip Flash. Uses a Type-C interface, eliminating concerns about correct plug orientation.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage; no additional power supply is required for the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.14. Rail-mounted ABS protective casing for easy installation and safer use.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Controllable via USB. Identified as a mass storage device for drag-and-drop program downloading18. 34 multi-functional GPIO pins19. 1 HSTX pin, 2 I2C pins, 2 UART pins, 8 12-bit ADC pins, and 24 controllable PWM channels20. 12 programmable I/O (PIO) state machines for custom peripheral supportProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled with a jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power supply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs

Lesen Sie Mehr Weniger

1. Applicable to various platforms such as 51/AVR/AVR/ARM2. Using high current relay, AC250V/10A, DC30V/10A3. Independent wiring of the contact part, safe and reliable4. Standard interface, which can be expanded on various development boards5. With fixing screw holes for easy installation6. Size: 138x56x19.3mmSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 100 pcs = 56600 pcs40HQ: 1314 cartons * 100 pcs = 131400 pcs

Lesen Sie Mehr Weniger

Features1. With LCD display, the current mode and parameters are clear at a glance, very clear, simple and practical. 2. Support high and low level trigger, switch control, suitable for most occasions. 3. Wide voltage power supply (6~30V) supports micro USB 5.0V power supply, which is very convenient to use. 4. Support UART data upload and parameter setting. 5. There is a key emergency stop function (STOP key), with reverse connection protection, reverse connection will not burn. 6. Added sleep mode. After enabling, if there is no operation within 5 minutes, the LCD backlight will be automatically turned off; any key will wake up. 7. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately. 8. All setting parameters are automatically saved after power off.Specification1. Working voltage: 6-30V, support micro USB 5.0V power supply 2. Trigger signal source: high level trigger (3.0V~24V), low level trigger (0.0V~0.2V), switch control (passive switch). 3. Output capability: can control equipment within DC 30v 5A or AC 220v 5A 4. Quiescent current: 15mA Working current: 50mA 5. Working temperature: -40a??85 degrees Celsius 6. With optocoupler isolation, enhance anti-interference ability, industrial-grade circuit board, set parameters will be remembered forever after power off 7. Size: 8.0x3.8x1.9cm 8. Weight: about 36gSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 10cm * 2cm / 3.94inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 42cm * 32cm / 16.54inch * 16.54inch * 12.6inch Loading Container 20GP: 472 cartons * 200 pcs = 94400 pcs40HQ: 1096 cartons * 200 pcs = 219200 pcs

Lesen Sie Mehr Weniger

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Specification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 13cm * 9cm * 6cm / 5.12inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 21.00kgs / 46.30lb Carton Size 47cm * 32cm * 28cm / 18.5inch * 12.6inch * 11.02inch Loading Container 20GP: 633 cartons * 50 pcs = 31650 pcs40HQ: 1470 cartons * 50 pcs = 73500 pcs

Lesen Sie Mehr Weniger

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Specification: Package Weight One Package Weight 0.38kgs / 0.83lb One Package Size 13cm * 9cm * 6cm / 5.12inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 21.00kgs / 46.30lb Carton Size 47cm * 32cm * 28cm / 18.5inch * 12.6inch * 11.02inch Loading Container 20GP: 633 cartons * 50 pcs = 31650 pcs40HQ: 1470 cartons * 50 pcs = 73500 pcs

Lesen Sie Mehr Weniger

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Specification: Package Weight One Package Weight 0.43kgs / 0.95lb One Package Size 13cm * 9cm * 6cm / 5.12inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 21.00kgs / 46.30lb Carton Size 47cm * 32cm * 28cm / 18.5inch * 12.6inch * 11.02inch Loading Container 20GP: 633 cartons * 50 pcs = 31650 pcs40HQ: 1470 cartons * 50 pcs = 73500 pcs

Lesen Sie Mehr Weniger

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Heat sink parameters: 1. Material: aluminum 2. Size: 50x50x82mm 3. Hole distance: 48mm 4. Product weight: 61g Specification: Package Weight One Package Weight 0.43kgs / 0.94lb One Package Size 13cm * 9cm * 6cm / 5.12inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 22.00kgs / 48.50lb Carton Size 47cm * 32cm * 28cm / 18.5inch * 12.6inch * 11.02inch Loading Container 20GP: 633 cartons * 50 pcs = 31650 pcs40HQ: 1470 cartons * 50 pcs = 73500 pcs

Lesen Sie Mehr Weniger

1. Din-Schiene: 35 mm 2. Werkstoff: PC V0 3. Eingang: 100-240 V Wechselstrom, 50/60 Hz 4. Ausgang: 100-240 V Wechselstrom, 50/60 Hz 5. Ohmsche Last: 2200 W 10 A/Gruppe, 3300 W 15 A/Gesamt 6. Motorlast: 10-240 W 1 A 7. WLAN: IEEE 802.11 b/g/n 2,4 GHz 8. Mehrfachschutz, sicher und zuverlässig 9. Dieser Schalter macht Ihre Elektrogeräte intelligent. Solange Ihr Mobiltelefon über ein Netzwerk verfügt, können Sie Ihr Gerät jederzeit und überall aus der Ferne ein- oder ausschalten 10. Indem Sie einen Zeitplan für Ihr Gerät festlegen, können Sie ein sorgenfreies Leben führen Spezifikation: Paketgewicht Gewicht eines Pakets 0,19 kg / 0,42 lb Einheitspackungsgröße 10 cm * 8 cm * 5 cm / 3,94 Zoll * 3,15 Zoll * 1,97 Zoll Menge pro Karton 100 Kartongewicht 20,00 kg / 44,09 lb Kartongröße 30 cm * 40 cm * 35 cm / 11,81 Zoll * 15,75 Zoll * 13,78 Zoll Container laden 20GP: 634 Kartons * 100 Stück = 63400 Stück 40HQ: 1473 Kartons * 100 Stück = 147300 Stück

Lesen Sie Mehr Weniger

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Heat sink parameters: 1. Material: aluminum 2. Size: 50x50x82mm 3. Hole distance: 48mm 4. Product weight: 61g Specification: Package Weight One Package Weight 0.43kgs / 0.94lb One Package Size 13cm * 9cm * 6cm / 5.12inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 22.00kgs / 48.50lb Carton Size 47cm * 32cm * 28cm / 18.5inch * 12.6inch * 11.02inch Loading Container 20GP: 633 cartons * 50 pcs = 31650 pcs40HQ: 1470 cartons * 50 pcs = 73500 pcs

Lesen Sie Mehr Weniger