Suchergebnisse für "compact sensor"

1. Microcontroller: ESP32-S3-WROOM-1-N16R8 2. Antenna Interface: On-board PCB antenna 3. Wireless Communication: 2.4 GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (BLE) 4. Input Voltage: Supply Range: 5 V – 24 V 5. WLED Light Output:- Maximum Output Current: 8 A (adequate heat dissipation required) - Output Channels: 2 LED output channels (GPIO2, GPIO16) - Supported LED Strips: WS2812B / WS2811 / SK6812 / TM1814 / SM16704 / APA102 / SK9822 / monochrome LED strips, etc. - Control Methods: WLED open-source firmware (web-based control); supports color, brightness, dynamic effects, zone control, scene presets, and other functions 6. USB Interface:- Interface Type: USB Type-C - Supply Voltage: 5V - Functions: USB communication, firmware download, etc. 7. Isolated RS485 Communication Interface:- Interface Type: Terminal blocks - Direction Control: Automatic control via master hardware flow settings - Interface Protection: Provides TVS diode protection, surge protection, and ESD protection - Matching Resistor: Default NC; 120R matching resistor reserved; can be enabled via jumper cap 8. Indicator Lights:- PWR: Power indicator; lights up red when connected to USB and voltage is detected - RS485: RS485 indicator: Lights up green when data is transmitted from the RS485 interface via TXD; lights up blue when data is received from the RS485 interface via RXD 9. Enclosure: DIN-rail mounting enclosure10. Dimensions: Approx. 8.19 x 5.4 x 3.2 cm Features:1. Based on the ESP32-S3-WROOM-1-N16R8 module, featuring an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz2. Integrates 2.4 GHz Wi-Fi and Bluetooth 5 (LE) wireless communication, facilitating the development of wireless control, device networking, and IoT applications3. Equipped with 16 MB of Flash and 8 MB of PSRAM, providing ample storage and runtime capacity for lighting control, audio processing, and complex application development4. On-board LED strip data output interface; through 5V level conversion, it can connect to a variety of digital LED strips, facilitating the development of WLED, ambient lighting, and personalized lighting effects5. Integrated isolated RS485 communication interface, facilitating communication with devices such as sensors, PLCs, and Modbus systems6. On-board RS485 transmit/receive status indicator lights, facilitating monitoring of data transmission/reception and program debugging7. On-board integrated isolated power supply provides stable isolated voltage; no additional power supply is required for the isolated side8. Integrated ES7210 audio ADC and ES8389 audio codec support multi-channel microphone input and stereo audio output, enabling development of AI voice and voice interaction applications9. On-board 3.5mm audio jack and PH2.0 4-pin speaker connector, facilitating the development of audio input/output applications10. Supports a wide voltage range of 5–24V11. On-board Type-C port for program upload and debugging12. Provides multiple sets of GPIO expansion ports and user buttons, facilitating the connection of sensors, actuators, and other peripherals for functional expansion13. Supports development environments such as ESP-IDF and Arduino, with accompanying example programs and development resources to facilitate quick setup and secondary development14. Equipped with a rail-mounted protective enclosure, suitable for both development and debugging as well as installation in actual projectsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 7cm * 5cm / 4.72inch * 2.76inch * 1.97inch Qty per Carton 100 Carton Weight 13.00kgs / 28.66lb Carton Size 45cm * 32cm * 30cm / 17.72inch * 12.6inch * 11.81inch Loading Container 20GP: 617 cartons * 100 pcs = 61700 pcs40HQ: 1432 cartons * 100 pcs = 143200 pcs

Lesen Sie Mehr Weniger

1. Material: plastic2. Display mode: dot matrix LCD3. Display size: 2.6 inches4. Display points: 240x3205. Display contrast: 10-100%6. Backlight: highlight LED backlight7. Depth range: 0.6-50 meters8. Wireless working range: 180 meters (MAX)9. Sonar frequency: 120KHZ10. Sonar beam angle: 105 degrees11. Radio frequency: 433 MHz12. Working temperature: -20 ~70 degrees Celsius13. Host: Lithium battery 3.7V14. Sensor: polymer battery 3.7V15. Lithium battery capacity: 300 mA16. Color high-definition screen, visible in the sun17. Dimensions 120x68x20 mm18. Weight: 460 gramsSpecification: Package Weight One Package Weight 0.48kgs / 1.07lb One Package Size 25cm * 10cm * 5cm / 9.84inch * 3.94inch * 1.97inch Qty per Carton 62 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 62 pcs = 10974 pcs40HQ: 412 cartons * 62 pcs = 25544 pcs

Lesen Sie Mehr Weniger

Meet Hion Motion Sickness Glasses Designed for travelers who want a practical, portable option to address travel-related dizziness, these glasses pair a lightweight form with a clever, lensless design. The set includes two pairs and a compact case, making it easy to slip into a bag or keep in a car glove compartment for quick access during journeys of all kinds. What makes them stand out Ultra-lightweight construction from imported TPE material that feels soft, elastic, and durable for long-wear. Compact, foldable design that travels easily and stores flat in its case. Right-angled beam at the middle connection helps prevent deformation and preserves a comfortable fit. Nose pad design stays secure across different head sizes and shapes, reducing shifting during movement. How the technology works The glasses use a lensless configuration featuring a liquid-filled circle. The liquid level adjusts with vehicle movement to create a steady reference in sight, helping eyes and balance sensors re-sync after motion. This approach is drug-free and side-effect-free, offering a simple, natural option for on-the-go use. Note that these glasses are not a medical treatment; use as directed and consider them as a travel aid to complement your comfort routine during motion. When and how to use If you feel dizzy while traveling, try focusing on a stationary object such as a book or a phone screen, then wear the glasses for about 10 to 14 minutes. You may notice that the effects continue after you remove them, supporting steadier moments as you resume your activity. Ideal for driving, boating, riding, flying, and even certain high-motion games or wearable experiences. Drug-free design provides a simple alternative for those seeking a calm, balanced moment during travel. Travel-ready value Two pairs come with a protective case, helping you share with a travel partner or keep one pair in your carry-on and another at home. Lightweight, portable, and easy to slip on when motion starts to feel uncomfortable. FAQ Q: What are Hion Motion Sickness Glasses? A: A two-pair, ultra-light set with a lensless liquid-filled design intended to help travelers feel steadier during motion, without medications. Q: How should I use them for best results? A: If you feel dizzy, focus on a stationary object and wear for about 10–14 minutes; effects may continue after removal.

Lesen Sie Mehr Weniger

1. The ESP32-S3-Tiny is a compact microcontroller development board featuring a variety of digital interfaces. It employs a split-type design, allowing the USB and button circuits to be separated, reducing the overall PCB thickness and volume. Despite its ultra-compact form factor, it provides access to 34 GPIO pins, facilitating easier integration into projects.2. It utilizes the ESP32-S3 series as its main chip, equipped with a dual-core Xtensa 32-bit LX7 processor running at up to 240 MHz.3. It features stacked 4MB / 8MB Flash and 2MB / 8MB PSRAM, integrated 512KB SRAM, and 384KB ROM.4. It integrates dual-mode wireless communication with 2.4 GHz Wi-Fi and Bluetooth Low Energy (Bluetooth LE), offering excellent RF performance.5. The board includes an onboard FPC 8-pin interface, which can connect to a USB Type-C interface via an adapter board.6. 34 multi-functional GPIO pins of the ESP32-S3 are exposed.7. It boasts a rich set of peripheral interfaces, including SPI, I2C, UART, ADC, and PWM interfaces, enabling greater flexibility in implementing various functionalities.8. It supports multiple low-power operating states, allowing adjustment of the balance between communication range, data rate, and power consumption to meet the power requirements of diverse application scenarios.Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 160 Carton Weight 10.70kgs / 23.59lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 160 pcs = 93280 pcs40HQ: 1354 cartons * 160 pcs = 216640 pcs

Lesen Sie Mehr Weniger

1. Degree C / Degree F Selection: The unit conversion operation allows data to transfer between Degree C and Degree F units. 2. Multi Function: The infrared temperature gun with AT function , which can measure current ambient temperature. 3. High Accuracy: The laser temperature gauge has a high precision sensor, under self calibration mode, can calibrate the unit between -5.0 Degree C and +5.0 Degree C, adjusting the emissivity from 0.1-1.0 according to the surface material being measured to improve measurement accuracy. 4. Fast Response: The infrared temp gun thermometer with a distance to spot ratio of 12:1 and a response time of less than 500Ms, Spectral response 5~14 um , 0.5s shows the most accurate temperature readings even at great distances,rapidly and accurately measured of object surface temperature. 5. Easy To Use: With backlight, makes it more easier to know the data even at the night . Data hold, low battery indication, auto power-off, small in size ,easy to store and carry. 6. Widely Used (Not for people): Temperature measurement range -50~530 Degree C (-58~986 Degree F). Temperature gun can be used for iron industry temperature test, food surface temperature test, oil surface temperature test, water surface temperature test, electrical Engineering etc.Specification: General Model GM53 Material ABS Resolution 0.1 degree C / 0.1 degree F Measurement Range -50~530 degree C Response Time 500 ms Power Supply 2 x AAA batteries ( not included) Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 20cm * 12cm * 5cm / 7.87inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 7.00kgs / 15.43lb Carton Size 50cm * 42cm * 27cm / 19.69inch * 16.54inch * 10.63inch Loading Container 20GP: 470 cartons * 40 pcs = 18800 pcs40HQ: 1091 cartons * 40 pcs = 43640 pcs

Lesen Sie Mehr Weniger

1. pH Measurement Range: 0.0~14.0pH2. Portable pH meter, high accuracy, stable operation. It measures the pH value of a solution and displays the temperature of the liquid being measured. Widely used in: industry, power, agriculture, medicine, food, scientific research, and environmental protection.3. When the pH value is below 3.5, the red backlight illuminates as an alarm, indicating that the liquid is approaching strong acidity; when the pH value is above 12.5, the red backlight illuminates as the liquid is approaching strong alkalinity.4. Automatic temperature compensation from 0 to 70 degrees Celsius; temperature has a certain impact on pH measurement, and the impact is even greater if high accuracy is required. Therefore, a high-precision pH meter with intelligent temperature compensation is essential.5. The instrument features a dual-color alarm and a night backlight, which can intuitively display the measured value. In measurement mode, if the measured value exceeds the range, the white light changes to a red over-value warning light, easily handling dark environments.6. This instrument features a three-point pH calibration function with automatic recognition and a simple, quick calibration process.7. A high-precision pH probe ensures faster and more accurate measurements, safeguarding precise water quality testing.8. Powered by two 1.5V AAA batteries, it is durable and easy to replace.9. The replaceable probe design with an insert-type mechanism makes replacement quick and easy.10. Ergonomically designed with anti-slip features on both sides for ease of use.11. Dimensions: 43x43x176mm12. Weight: 88gSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 20cm * 6cm * 6cm / 7.87inch * 2.36inch * 2.36inch Qty per Carton 60 Carton Weight 7.10kgs / 15.65lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 60 pcs = 31320 pcs40HQ: 1212 cartons * 60 pcs = 72720 pcs

Lesen Sie Mehr Weniger

Specifications1. Alarm: 108 decibels 2. Delay time upgraded to: 3/15/30/60 seconds, default delay 15 seconds 3. Prompt sound upgraded: drip-drop prompt is slower, not noisy and harsh 4. After canceling the trigger, there will be a beep prompt, silent protection, and prompt after delay 5. The host has two No. 7 batteries, and the battery is not delivered 6. General alarm: When the door or window is opened, the alarm sound will be issued immediately 7. Door closing alarm: If the door has been opened for 15 seconds (15 seconds is the factory default value, 3 seconds/15 seconds/30 seconds/60 seconds according to your choice), the alarm will continue to sound until the door is closed 8. Doorbell mode: a "ding-dong" sound is emitted when the door is opened 9. When the battery is low, the LED flashes once per second and a "BiBi" sound is emitted twice every 30 minutes to remind you to replace the battery 10. Easy to install and easy to set up, fix the magnetic bar within 1cm next to the magnetic sensor, use double-sided tape to keep the two alignment arrows opposite 11. Size: 85x43mm, magnetic bar 45x10mmInstallationBattery Installation: 1. Open the battery door, and loaded two AAA alkaline batteries. 2. When the battery after you install the unit will sound one long, one short a??Bea?|Bea?? Prompt the battery to a successful installation: 1. Please use alkaline batteries in order to get good use of effects, such as the use of other batteries can cause the battery use shorter or alarm sound. Installation: 1. Select windows and doors installation location, with water and a rag clear clean the mounting surface, the double-sided adhesive tape on the bottom and then the unit attached to the clean position. 2. Installed host, and then double-sided paste the magnet solid set in the host next to the door or door frame, pay attention please the magnets arrow at the arrow to the right host.Notes1. The machine is for indoor use, do not install in direct sunlight or rain, do not install in the region of high pollution or high humidity. 2. The magnetic sensor of the machine on the right side of the bodya??s mount the magnet in the right side of the machine and align the two arrows. 3. If the host is installed on the door, install the magnet on the door frame, turn, if the host is installed on the door frame should be a magnet mounted on the door, to ensure that the door is open magnet to leave the host to detect. 4. Ensure close the door the host and the magnet installation distance should not exceed 10mm.UseChange your password (first time or replace the battery, do the following to change the password) 1. Make sure the unit is not alert (flashing LED every three seconds in the garrison state once). 2. Press "1" key more than 2 seconds, the machine will beep 1 short "Be", and the LED flashes prompted to enter the password to change the status. 3. Enter the old four-digit PIN (for the first time, to change the password please enter the factory default password "1234"), the machine prompts two short sound of "Be...Be", then enter the new four-digit PIN , the machine will ring three times "the Be...Be...Be" mention show the password change, please remember the new password. 4. Error in the process of enter a password, the machine will ring long and Du...", please repeat "5.3.1.2~5.3.1.3." 5. Keep the battery when you forget your password split out two minutes after installing the battery the unit will restore the factory default password "1234". 6. After replacing the battery password will be restored to factory settings, change your password, please click on the above-mention operation.SettingEnter the delay time setting: 1. Native in the police state, the door was opened to the alarm there is some delay, this delay is used to input to the user to lift the machine into the password, factory setting is 3 seconds, when you first use based on your actual use of the situation set up this time, 2. Make sure the unit is not alert (security status LED flashes every three seconds). 3. More than two seconds. "2"key, the machine will beep 1 short "Be", and the LED flashes, suggesting that the delay to change the satus. 4. Then "1" key once, the machine will ring three times"Be...Be..。Be" prompt delay is changed to 0 seconds, the doors open alarm immediately, if you press the "2" key to change the delay for 3 seconds, "3" key to change the delay for five seconds, "4" key the delay is changed to 10 seconds. 5. Based on your intended use and operation of proficiency set this delay time. 6. When replacing the battery, please re-set the delay time, Arming and disarming: 1. In standby mode, press ON/OFF button once, the machine will ring three times "of Bi of Bi of Bi" prompts the machine to enter the armed mode 15 seconds after the alert status and the LED will flash once every three seconds. 2. In the deployed state, enter the four personal password and then press the ON/OFF key, the unit will beep "of Bi..." sound prompts the machine had to withdraw from the deployment mode in this mode, the machine does not prompt outside of any function in addition to low power. 3. Alarm is triggered 4. Detected in the deployed status, such as the door changed to open the actionSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 6cm * 5cm / 3.94inch * 2.36inch * 1.97inch Qty per Carton 150 Carton Weight 7.80kgs / 17.20lb Carton Size 41cm * 28cm * 31cm / 16.14inch * 11.02inch * 12.2inch Loading Container 20GP: 749 cartons * 150 pcs = 112350 pcs40HQ: 1739 cartons * 150 pcs = 260850 pcs

Lesen Sie Mehr Weniger

1. 2.4 inch color LCD screen 2. Fingerprint sensor resolution: 500DPI 3. Communication: TCP/IP, USB memory disk 4. User: 5000 5. Fingerprint capacity: 5000 6. Card capacity: 5000 7. Transaction capacity: 100000 8. Hardware Platform: REALAND Face 2960 9. Software OS: Windows XP/Win2003/Vista/Win7/Win8 /Win10 (32bit/64bit) 10. Identification Time: <1S 11. Authentication method: Fingerprint, Password, ID Card 12. Language: support Chinese, English 13. Built-in timing bell (scheduled-bell) 14. Access control interface: Wiegand input/output(26/34), exit button input, door sensor input, bell relay, door relay, tamper input 15. Operating mode: Off-line/On-line 16. Battery capacity: 2200mAh 17. Dimension: 17.9x14.5x2.5cm Specification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 32cm * 26cm * 10cm / 12.6inch * 10.24inch * 3.94inch Qty per Carton 10 Carton Weight 11.00kgs / 24.25lb Carton Size 53cm * 52cm * 34cm / 20.87inch * 20.47inch * 13.39inch Loading Container 20GP: 284 cartons * 10 pcs = 2840 pcs40HQ: 660 cartons * 10 pcs = 6600 pcs

Lesen Sie Mehr Weniger

1. Sensor 1/4 PC7070 CMOS 2. Resolution: 720(H) x 480(V) 3. TV line: 480TVL 4. Lens: Waterproof: IP68 5. View angle: 170 degree 6. Power voltage: 12V 7. Operation Temp.: -30~+80 degree Celsius 8. Min Lumination: 0 Lux 9. Suitable for Peugeot Traveller/Citroen Spacetourer/Toyota Proace2016-Specification: General Certificate EMC Compatible with Citroen: Spacetourer Peugeot: Traveller Toyota: Proace Package Weight One Package Weight 0.73kgs / 1.61lb One Package Size 30cm * 16cm * 8cm / 11.81inch * 6.3inch * 3.15inch Qty per Carton 26 Carton Weight 19.96kgs / 44.00lb Carton Size 52cm * 48cm * 42cm / 20.47inch * 18.9inch * 16.54inch Loading Container 20GP: 254 cartons * 26 pcs = 6604 pcs40HQ: 590 cartons * 26 pcs = 15340 pcs

Lesen Sie Mehr Weniger

Features1. Automatically sense the liquid to avoid contact and make it safer 2. Using a new chip, faster sensing time (500ms) 3. High temperature measurement accuracy, accuracy tolerance: +/-0.2 (34~42 degrees Celsius) 4. With abnormal temperature light prompt and voice warning 5. The appearance is extremely simple and can be integrated into various environments 6. The front cover is opened with a convenient magnetic design, making it easier to change materials 7. It can be connected to a USB power supply, a power bank, and two 18650 lithium batteries (not included) 8. Smart light-sensitive forehead thermometer, no need to hold it, it can be fixed with wall mount or tripod 9. Support setting 36-39 degrees Celsius alarm upper limit 10. Support voice broadcast in 12 countries, human body model broadcast: "Normal body temperature", "Please re-measure" 11. Up-drawing catheter, never leaking, never clogging 12. The battery is easy to install, intelligent circuit protection, and theSpecification1. Temperature measurement technology: Automatic non-contact temperature measurement and disinfection 2. Measuring method: Photosensitive sensor distance sensor 3. Unit of measurement: C and F degrees (Celsius and Fahrenheit) 4. Accuracy tolerance: +/-0.2 (34~42 degrees Celsius) 5. Measuring distance: About 5cm automatic measurement 6. Capacity of liquid bottle: 450ml 8. Liquid type: Liquid hand sanitizer, liquid disinfectant 9. Display mode: Digital display 10. Placement: Wall-mounted, bracket fixed 11. Power supply: USB plug / 2 18650 batteries (not included) 12. Response time: 0.5s 13. Standby time: 5S standby during non-working time, white point dynamic cycle 14. Product size: 208 x 115 x 86mm 15. Product net weight: 800g 16. Working mode: Human body mode, counting mode, surface mode 17. Human body temperature measurement range: 35-42 degrees Celsius 18. Working environment temperature range: 10-40 degrees Celsius (15-35 degrees Celsius recommended) 19. Counting mode counting range: 0-999 20. Abnormal measurement temperature: The display shows the temperature value, the middle alarm light flashes red, and an alarm sounds 21. Volume settings: Support settings (five levels of volume settings) 22. Alarm upper limit: Support setting (36-39 degrees Celsius) 23. Voice broadcast: Support 12 languages a??a??for broadcast 24. Automatic shutdown: 5S standby during non-working time, white dot dynamic cycle 25. Whether to support charging: Support charging 26. Whether to support outdoor measurement: Not support use in the sunSpecification: Package Weight One Package Weight 0.96kgs / 2.11lb One Package Size 27cm * 15cm * 12cm / 10.63inch * 5.91inch * 4.72inch Qty per Carton 12 Carton Weight 12.00kgs / 26.46lb Carton Size 48cm * 43cm * 30cm / 18.9inch * 16.93inch * 11.81inch Loading Container 20GP: 430 cartons * 12 pcs = 5160 pcs40HQ: 999 cartons * 12 pcs = 11988 pcs

Lesen Sie Mehr Weniger

1. Image Sensor: Sony IMX415 2. CMOS Size: 1/2.9 inches 3. Camera Type: Color4. Effective Pixels: Approx. 8.29 MP (3840 x 2160) 5. Diagonal Size: 6.43 mm 6. Pixel size: 1.45 μm (H) x 1.45 μm (V) 7. Aperture: F2.2 8. Focal length: 3.3 mm 9. Field of View: 93.5 degrees (D) x 85.2 degrees (H) x 55.5 degrees (V) 10. Distortion: -0.4% 11. Application Scenarios: AI applications such as facial recognition, road sign recognition, and license plate recognition 12. Compatible Boards: Compatible with Raspberry Pi 5 / Zero series / Zero 2W series boards (4B / 3B+ / 3B series require an additional FPC cable)13. Dimensions: Approx. 3.8 x 1.63 cm Features:1. 8MP High-Definition Image Quality: Equipped with an IMX415 sensor, it delivers high-resolution imaging with approximately 8.29 million pixels (3840 x 2160).2. Flexible Autofocus: Supports smooth, lag-free autofocus for more precise and flexible shooting and capture (requires the host device to support autofocus).3. Wide-Angle Field of View: Features a built-in 93.5-degree wide-angle lens, providing a broader field of view and a wider viewing angle4. High Signal-to-Noise Ratio and Excellent Low-Light Performance: Delivers superior imaging results in low-light environments, producing more realistic and detailed images5. Low-Distortion Design: Equipped with a distortion-free lens featuring a distortion rate of only -0.4%, delivering distortion-free imaging and more accurately reproducing real-world scenesSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 100 Carton Weight 5.80kgs / 12.79lb Carton Size 42cm * 33cm * 20cm / 16.54inch * 12.99inch * 7.87inch Loading Container 20GP: 962 cartons * 100 pcs = 96200 pcs40HQ: 2233 cartons * 100 pcs = 223300 pcs

Lesen Sie Mehr Weniger

1. Synchronized operation with dual-screen, frame-by-frame output for efficient collaboration and precise synchronization2. Features a distortion-free lens with a distortion rate of <0.2%, ensuring distortion-free imaging and maximum fidelity to the actual scene3. Features a USB 2.0 interface; no driver installation required. Easily connects to various USB host devices—whether computers, smart devices, or other USB-enabled terminals—simply plug and play for quick setup, saving installation time4. Resolution: 2.0 MP5. Image sensor: AR01446. Interface type: USB 2.0 (Type-C)7. Baseline length: 52mm 8. Communication interface: Type-C USB 2.0 9. Operating voltage: 5V ±5%10. Size: about 66 x 30 x 17.72mmCamera1. Sensor size: 1/4 inch 2. Aperture (F): 2.2 3. Focal length (EFL): 2.88 mm 4. Field of view (FOV): 74° (D) / 65° (H) / 43° (V) 5. Focusing method: fixed focus 6. Distortion: <0.2% 7. IR cut filter: 650nm filter 8. Shutter type: global shutter Image:1. Supported formats: MJPG, YUY22. Still image resolution: 2560 x 720 (1280 x 720) 3. Video recording support:- MJPG: 30 FPS 2560 x 720, 60 FPS 1600 x 600, 60 FPS 1280 x 720, 60 FPS 800 x 600, 60 FPS 640 x 480, 120 FPS 640 x 352, 120 FPS 640 x 360 - YUY2: 5 FPS 2560 x 720, 10 FPS 1280 x 720, 20 FPS 800 x 600, 30 FPS 640 x 480, 30 FPS 640 x 360Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 6cm * 3cm / 3.94inch * 2.36inch * 1.18inch Qty per Carton 280 Carton Weight 17.80kgs / 39.24lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 280 pcs = 122640 pcs40HQ: 1018 cartons * 280 pcs = 285040 pcs

Lesen Sie Mehr Weniger