Suchergebnisse für "replacement relay"
-
3Pin 8 Way Switches Combination Switch Panel with Light and Projector Lens for Car RV Marine Boat, 3Pin 8 Way
1. The product is a 8-bit switch panel with 8 switches, which can control the switch status of the eight appliances at the same time. 2. Product Usage: Can be used for headlight switch, fog light switch, width light switch, car refrigerator switch, car vacuum cleaner switch, car external equipment to take power for mobile phones, flat panel and other power supply. 3. Applications: Suitable for ships, yachts, motor homes, buses and other high-grade large vehicles. 4. Input voltage is 12V / 24V: it can be used as long as 12 / 24V input, such as the ship, car, bus, etc. 5. ABS, PC, PBT materials: resistant to high and low temperature and anti-flame retardant environmentally friendly materials, can work from -25 Deg.C to 80 Deg.C 6. When a single switch controls the maximum input current for the overload protector, the product has an overload protector. After the overload protector is repressed, the electrical appliances corresponding to the current will be used for continuous use. 7. Specification: Power: 120 W - 260 W Input Voltage: 12 / 24 V Operating Temperature: -25 ~ 80 Degrees Celsius Waterproof: IP65Specification: Package Weight One Package Weight 0.70kgs / 1.54lb One Package Size 26cm * 14cm * 11cm / 10.24inch * 5.51inch * 4.33inch Qty per Carton 20 Carton Weight 13.80kgs / 30.42lb Carton Size 46cm * 44cm * 40cm / 18.11inch * 17.32inch * 15.75inch Loading Container 20GP: 329 cartons * 20 pcs = 6580 pcs40HQ: 764 cartons * 20 pcs = 15280 pcs
£36.99
-
10 PCS HW-482 5V Relay Module, Arduino Relay Module
1. 5V relay module2. It can be used as a single-chip development board module, and can be used as a home appliance control3. 5V-12V TTL control signal4. Control DC or AC signal, can control 220V AC load5. There is a normally open and a normally closed contact6. Has a power indicator7. There is a control indicator light, which is bright when closing, but not bright when disconnecting8. Transistor drive increases the relay coil, and the control pin is high impedance9. The control pin has a pull-down circuit to prevent the false action of the floating relaySpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 100 pcs = 56600 pcs40HQ: 1314 cartons * 100 pcs = 131400 pcs
£3.99
-
Waveshare Waveshare Modbus RTU 32-Ch Relay Module RS485 Interface With Multiple Isolation Protection Circuits, 25140
1. This product is an industrial 32-channel relay module controlled via an RS485 interface. It utilizes the Modbus RTU protocol and features built-in protection circuits—including power isolation, magnetic coupling isolation, resettable fuses, and TVS—housed in an ABS DIN-rail mount enclosure. Easy to operate, the module offers high-speed, stable, reliable, and secure communication, making it suitable for a wide range of industrial control equipment and applications with demanding communication requirements. 2. Supports configurable device addresses (1–255) for cascading multiple devices via the RS485 bus; features "flash-on" and "flash-off" functions, allowing the relay to be controlled via commands to turn on or off automatically after a set duration.3. Onboard voltage regulator chip supports a wide input voltage range of 7–36V.4. Onboard integrated power isolation provides stable isolated voltage; the isolated side requires no external power supply.5. Onboard integrated magnetic coupling isolation ensures signal isolation with high reliability, strong anti-interference capabilities, and low power consumption.6. Onboard resettable fuse and TVS (Transient Voltage Suppressor) effectively suppress surge voltages and transient voltage spikes, providing protection against overcurrent, overvoltage, lightning, and ESD.7. Onboard optocoupler isolation prevents interference from the relays high-voltage circuits.8. Uses a dedicated relay driver chip with built-in flyback diode protection for stronger, more stable driving performance.9. Onboard reverse-polarity protection circuit prevents circuit damage caused by incorrect positive/negative terminal connections.10. Uses high-quality relays; supports loads up to 10A 250V AC or 10A 30V DC.11. Rail-mount ABS protective enclosure ensures convenient installation and enhanced safety.12. Three external LED indicators allow for easy monitoring of MCU status and signal transmission/reception status.Specifications:1. Operating voltage: 7–36V2. Communication interface: RS4853. Communication baud rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560004. Default communication format: 9600, N, 8, 15. Number of relay channels: 326. Contact type: One Normally Open (NO), One Normally Closed (NC)7. Contact load: ≤10A 250V AC or ≤10A 30V DC8. Modbus protocol: Standard Modbus RTU Protocol9. RS485 Address Setting: 1–25510. Indicator LightsSTA: MCU indicator; flashes when the MCU is operating normallyTXD: Transmit indicator; lights up when transmitting dataRXD: Receive indicator; lights up when receiving dataSpecification: Package Weight One Package Weight 0.77kgs / 1.71lb One Package Size 32cm * 13cm * 8cm / 12.6inch * 5.12inch * 3.15inch Qty per Carton 15 Carton Weight 12.70kgs / 28.00lb Carton Size 34cm * 38cm * 42cm / 13.39inch * 14.96inch * 16.54inch Loading Container 20GP: 491 cartons * 15 pcs = 7365 pcs40HQ: 1140 cartons * 15 pcs = 17100 pcs
£65.99
-
PS5 DualSense V2 R2 L2 L1 Button & Spring Replacement Set
🔧 Refresh a compatible PS5 DualSense V2 controller with replacement buttons and springs.This replacement set is intended for PS5 Controller V2 repair work.🎯 Problem → SolutionDamaged or unusable controller button components can affect everyday gameplay. Replace the affected parts during a suitable controller repair. For PS5 Controller V2 Replacement R2, L2 and L1 button components with springs Supplied as a repair/replacement accessory set Supplier states items are inspected before shipment Controller disassembly is required 🛍️ Useful for compatible DualSense V2 controller repair projects.
£2.99 £0.99
-
Waveshare Waveshare Industrial 6-Ch Relay Module For Raspberry Pi Zero RS485/CAN, Isolated Protections, EU Plug, US Plug
1. Uses the SP3485 chip controlled via UART; supports automatic transmit/receive switching for RS485 half-duplex communication.2. Uses the MCP2515 + SN65HVD230 combination controlled via SPI; enables CAN half-duplex communication.3. Features onboard integrated power isolation, providing stable isolated voltage without the need for an external power supply on the isolated side.4. Includes onboard optocoupler isolation to prevent interference from external high-voltage relay circuits affecting the main control chip.5. Equipped with onboard TVS (Transient Voltage Suppressor) diodes to effectively suppress surge voltages and transient voltage spikes, offering lightning and ESD protection.6. Features onboard resettable fuses and protection diodes to ensure stable current and voltage output, protect against overcurrent and overvoltage, and enhance surge resistance.7. Uses high-quality relays; supports loads up to 10A 250V AC or 10A 30V DC.8. Housed in a DIN-rail mountable ABS protective case for convenient installation and safer operation.Specifications:1. Power supply voltage: 7V–36V2. Number of relay channels: 63. Communication protocols: RS485, CAN4. Contact type: One Normally Open (NO), One Normally Closed (NC)Specification: Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 17cm * 11cm * 5cm / 6.69inch * 4.33inch * 1.97inch Qty per Carton 9 Carton Weight 30.80kgs / 67.90lb Carton Size 32cm * 32cm * 47cm / 12.6inch * 12.6inch * 18.5inch Loading Container 20GP: 554 cartons * 9 pcs = 4986 pcs40HQ: 1286 cartons * 9 pcs = 11574 pcs
£37.99
-
WAVESHARE WAVESHARE RP2350 Industrial Control Board 6-Channel Relay Module, Based On RP2350 Microcontroller, Supports Wxternal Interfaces RS485 And Pico, Without Wi-Fi Module
1. Based on the RP2350 main control chip, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. 12 programmable I/O (PIO) state machines for custom peripheral support.4. Built-in 520KB SRAM and 16MB on-chip Flash, using a Type-C interface for easy connection.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage, requiring no additional power supply at the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easily monitoring the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easily monitoring the devices operating status.14. DIN rail mountable ABS protective casing for easy installation and enhanced safety.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Can be recognized as a mass storage device via USB for drag-and-drop program downloading. 18. Provides 34 multi-functional GPIO pins19. Pins include 1 HSTX, 2 I2C, 2 UART, 8 12-bit ADC, and 24 controllable PWM channelsProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled by jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power dupply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs
£27.99
-
AERMOTOR AERMOTOR Automotive Circuit Relay Tester Repair Tool
1. Can quickly detect whether your relay is normal, easy to use, suitable for automotive relays on the market, support 12V and 24V relay testing2. Most car lights, wipers, starters, air conditioners, electric seats, electric doors and windows, anti-lock brakes and audio use relays. Automotive relays are subject to vibration, high temperature, low temperature, humidity, etc., which will reduce their lifespan. However, once a relay fails, it will immediately cause system components to be paralyzed, and even cause the entire aircraft to be unusable. Therefore, it is very important to regularly check the relays in the car3. Through the continuous car battery to the relay coil, the detector can normally check the contact function of the relay4. The tester observes the contact data, closing time, relay inertia, etc. at each test stage5. Easy to operate, easy to carry, and durableOperation instructions:1. When testing, clamp the red clip to the positive pole of the battery and the black clip to the negative pole of the battery2. When testing a 12V relay, it needs to be connected to a 12V battery3. After connecting to the power supply, the device lights up red and the relay can be inserted4. To test the 4-pin relay, turn the switch to 4PIN, and to test the 5-pin relay, turn the switch to 5PIN5. After connecting the relay and adjusting the pin position switch, you can press the button6. If the pin position is incorrect or the relay is damaged during the test, the red LED light will be on7. When the pin position is set correctly, the tester will light up the green LED light and flash 10 times to indicate that the relay is normalSpecification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 19cm * 16cm * 4cm / 7.48inch * 6.3inch * 1.57inch Qty per Carton 32 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 34cm * 34cm / 15.75inch * 13.39inch * 13.39inch Loading Container 20GP: 576 cartons * 32 pcs = 18432 pcs40HQ: 1338 cartons * 32 pcs = 42816 pcs
£6.99
-
xdsource For Braun 5 / 8000 51S / 51B Series Wf2s / 5760 / 530 / 550 Replacement Foil Head+Blade, Foil Head+Blade
MIRA SALES | SHAVER PARTBraun 5 / 8000 Series 51S / 51B Replacement Foil Head + Blade A replacement foil head and blade assembly for the compatible Braun 5 / 51B / 8000 / 51S family listed below, supplied as a practical maintenance part. ⭐ MIRA SALES TIP Match your Braun model number with the compatibility list before ordering. For best fit, compare the original shaving head shape and series as well as the model number. ABS + Stainless SteelConstruction Braun 5 / 8000Compatible series 51S / 51BListed head series 2 VariantsBlack or Silver Key Features Replacement Foil + Blade Designed as a replacement shaving-head assembly for compatible Braun models. Broad Compatibility Listed for Braun 5 / 51B / 8000 / 51S series models including WFS1, WFS2, 530, 550, 590 and others shown below. Maintenance Part Suitable for replacing a worn shaving-head assembly during routine shaver maintenance. Compact Packaging Approximate package size is 7 × 5 × 5cm with an approximate package weight of 0.02kg. Product Images — Auto Changing Every 2 Seconds More Product Photos Key Specifications Material ABS + stainless steel Compatible Series Braun 5 / 51B / 8000 / 51S Listed Models WFS1, WFS2, 530, 550, 590, 8585, 8985, 8995, 8975, 5643, 5645, 5646, 5647, 5649, 5751, ContourPro550/560/570CC/590CC Package Size 7 × 5 × 5cm Package Weight Approx. 0.02kg Package & Variant1 × Braun replacement foil head + blade. Selected variant: Foil Head+Blade / Silver. SKU: TBD0606058001B.
£7.99
-
Waveshare Waveshare Modbus RTU 8-Channel RS485 Relay Module With Digital Input Multi Isolation Protection Circuits, 7~36V Power Supply
Waveshare Modbus RTU 8-Channel RS485 Relay Module with Digital Inputs An industrial-grade 8-channel relay module using RS485 communication and Modbus RTU, with isolated protection circuits and digital inputs. Designed for compatible industrial control applications requiring multi-channel relay switching, RS485 communication and protected signal interfaces. Auto Rotation 📸 More Product Photos 📦 Package Details Package Weight: 0.15kg Package Size: 20 × 12 × 6cm Included: 8-channel RS485 relay module as supplied 🔧 Key Specifications Supply: 7–36V Communication: RS485 Protocol: Modbus RTU Relay Channels: 8 Digital Input: 8DI, 5–36V Address: 1–255 Contact Load: ≤10A 250V AC / ≤10A 30V DC ⭐ MIRA SALES TIP Verify your supply voltage, RS485 wiring and required relay load before installation. Check the connected system's electrical specifications carefully. ✅ Key Benefits • 8-channel relay control • RS485 communication • Standard Modbus RTU • 8 digital inputs • Multiple protection and isolation circuits
£35.99
-
5W Motorcycle Flasher LED Turn Signal Lights AMS Cement Indicator Load Decoder, 5W
1. Reduces the flash speed when moving from the bulb to the LED indicators. 2. Fit your existing relay unit instead of replacing the original equipment. 3. Made by good materials, it is durable and can be used for a long time. 4. It has a simple design, but very practical in use. 5. Easy to install and remove, convenient to use. 6. Power: 5WSpecification: Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 15cm * 9.5cm * 1.5cm / 5.91inch * 3.74inch * 0.59inch Qty per Carton 170 Carton Weight 7.28kgs / 16.05lb Carton Size 42cm * 32cm * 28cm / 16.54inch * 12.6inch * 11.02inch Loading Container 20GP: 708 cartons * 170 pcs = 120360 pcs40HQ: 1645 cartons * 170 pcs = 279650 pcs
£2.99 £0.99
-
OBDResource OBDResource 12V Automotive Relay Tester, RT100, RT100 With Storage Bag
1. Material: ABS material + hand-feel paint spray2. Test method: automatic identification3. Power supply current: 5V/2A4. Test type: 12V/24V relay5. Power supply method: 3 No. 5 batteries (not included)/Type-C power supply6. Intelligent shutdown, power saving, protection and extension of battery life7. Note: 1 minute without operation, LED light goes out, the device automatically shuts down and enters sleep, no power consumption8. Supports 10 types of relay tests with 5 different pins, whether the relay is normally open or normally closed, it can be tested9. Automatically identify 12V/24V, no need to select, just insert and test, easily detect relay faults10. Can be powered by three No. 5 batteries, no need to use battery clamps to connect to the vehicle battery, test at any time (not included)11. During the test, sound and light synchronous prompts (two-color LED indicator light green, red + buzzer)12. Dimensions: 152x75x38mmSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 17cm * 9cm * 6cm / 6.69inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 10.60kgs / 23.37lb Carton Size 41cm * 31cm * 31cm / 16.14inch * 12.2inch * 12.2inch Loading Container 20GP: 676 cartons * 50 pcs = 33800 pcs40HQ: 1571 cartons * 50 pcs = 78550 pcs
£44.99 - £46.99
-
Waveshare Waveshare 26756 Industrial 6-Channel ESP32-S3 WiFi Relay Module Supports WiFi / Bluetooth / RS485 control, 26756
1. Based on the ESP32-S3 microcontroller, featuring an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz.2. Integrates 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, offering superior RF performance.3. Uses a high-quality relay supporting loads up to 10A at 250V AC or 10A at 30V DC.4. Features an onboard isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.5. Includes an onboard Pico-compatible interface, supporting select Raspberry Pi Pico expansion boards to add functions such as RTC, CAN, RS232, LoRa, and sensors.6. Equipped with an onboard USB Type-C port for power supply and debugging, facilitating development.7. Features a terminal block power input supporting a wide voltage range (7–36V), suitable for industrial power applications.8. Incorporates onboard optocoupler isolation to prevent external high-voltage relay circuits from interfering with the control chip.9. Includes onboard digital isolation to protect the control chip from external signal interference.10. Features onboard integrated power isolation, providing stable isolated voltage without requiring an external power supply for the isolated side.11. Includes an onboard buzzer, RGB LED, and status indicators for power and RS485 TX/RX, allowing for easy monitoring of the devices operating status.12. Housed in a DIN-rail mountable ABS protective case for safe and convenient installation and use.Specification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 17cm * 11cm * 5cm / 6.69inch * 4.33inch * 1.97inch Qty per Carton 48 Carton Weight 16.50kgs / 36.38lb Carton Size 36cm * 42cm * 32cm / 14.17inch * 16.54inch * 12.6inch Loading Container 20GP: 551 cartons * 48 pcs = 26448 pcs40HQ: 1279 cartons * 48 pcs = 61392 pcs
£29.99