Suchergebnisse für "study electronics"
-
ANENG ANENG MH13 High Voltage Digital Electronic Meter Insulation Resistance Tester
1. Material: ABS + silicone2. Table and pen material: PVC / brass3. AC voltage measurement: 10-600V4. DC voltage measurement: 10-600V5. Resistance measurement range: 1 mu ~200G ohms6. Count: 2000 (MAX)7. Power supply: 8 AA batteries (excluding)8. The groove fit with silicone material protective cover, not afraid of falling effective protection instrument9. With 100 sets of data storage, easy to use10. Weight: 640 grams11. Total length of the pen: 108 cm12. Size: 180.5x70x140 mmSpecification: Package Weight One Package Weight 0.72kgs / 1.59lb One Package Size 21cm * 16cm * 10cm / 8.27inch * 6.3inch * 3.94inch Qty per Carton 42 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 42 pcs = 7434 pcs40HQ: 412 cartons * 42 pcs = 17304 pcs
$81.00
-
Waveshare Waveshare 4.3 inch 800x600 Pixel Serial Interface Electronic Paper Display UART Module, 10628
Overview1. This is a serial interface E-Ink display module, 4.3 inch, 800×600 resolution, with embedded font libraries, ultra low power consumption.2. You do not have to know anything about the complex underlying details of e-Paper, nor the specific algorithms of displaying graphics, texts, and images. All it needs is the serial interface, and all it matters is your creativity.Features1. Easy to use, displays any contents via one serial interface, including geometric graphics, texts, and images2. Embedded font libraries, supports 32, 48 and 64 dot matrix GBK Chinese fonts and English fonts3. Built-in 128MB NandFlash, allows the font/image data to be stored in either an external TF card or the internal NandFlash4. 4 grey level displaying, 800×600 resolution5. Adjustable serial interface baud rate, 115200 by default when power up6. Powered from 3.3V to 5V, compatible with logic level7. Ultra low power consumption, sleeping current lower than 5mA8. Comes with host computer software, control it directly on your computerApplications1. e book2. Shopping mall POS3. Price label4. Industry instrumentPin Definitions1. VCC: 3.3V~5.5V2. GND: GND3. DOU : Serial data out4. DIN: Serial data in5. WAKE_UP: External wake up6. RST: External resetPackage Contents1.4.3inch e-Paper UART Module x11. XH2.54 6-pin cable ×1Specification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 10cm * 14cm * 2cm / 3.94inch * 5.51inch * 0.79inch Qty per Carton 320 Carton Weight 15.00kgs / 33.07lb Carton Size 40cm * 56cm * 40cm / 15.75inch * 22.05inch * 15.75inch Loading Container 20GP: 297 cartons * 320 pcs = 95040 pcs40HQ: 690 cartons * 320 pcs = 220800 pcs
$71.00
-
G1000 Digital Microscope HD Mobile Phone Repair Electron Microscope, Aluminum Plastic Bracket, Aluminum Alloy Bracket
1. Resolution setting: HD, FHD2. Picture quality: 1M, 2M, 3M, 5M, 6M, 8M, 10M3. Cycle recording: 3 minutes, 5 minutes, 10 minutes4. White balance: auto, daylight, cloudy, tungsten light, fluorescent light5. Sixteen language systems: English, Spanish, Russian, Korean, Japanese, Thai, Hebrew, Portuguese, German, French, Italian, Turkish, Czech, Polish, Traditional Chinese, Simplified Chinese6. AC frequency: 50\60HZ7. Pixel: HD 10 million pixels8. Display: 4.3-inch high-definition LCD display9. Magnification: 1-1000 times continuous magnification system10. Object distance: 10mm to infinity (different object distance corresponds to different multiples)11. Battery capacity: 2000mAh12. Power DC interface: MICRO USB13. Flash memory card socket (MICROSD): Support 1-64GB (CLASS 10)14. Light source: 8 LED lights15. Packing list: host, data cable, lifting bracket, manualFeatures:1. Simple operation, wide range of uses, used for circuit repair, insect observation, breeding laboratory, jewelry identification, interest cultivation, learning experiment, etc.2. 185 achromatic objective lens, 10 million high-definition imaging, three kinds of objective lens can be switched freely, the magnification is freely selected, the image is clear and meticulous3. The 30-degree freely adjustable angle bracket reduces the problem of object reflection and facilitates the operation of repair tools, tweezers and electric chromium iron4. 4.3-inch high-definition LCD display, easy to use, plug and play, high definition, high brightness, replace the optical eyepiece with the electronic eyepiece, insert the eyepiece tube, and connect the power cord to use5. LED fill light, when the light source is insufficient, you can adjust the light scroll wheel next to the screen to control the intensity of the ED fill light and optimize the test results6. Focusing wheel, can zoom continuously, and the observation range is very wide7. With a TF card slot, insert a memory card, you can take photos and videos of the test results and share them to other devicesSpecification: Package Weight One Package Weight 0.79kgs / 1.73lb One Package Size 24cm * 18cm * 10cm / 9.45inch * 7.09inch * 3.94inch Qty per Carton 32 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 32 pcs = 5664 pcs40HQ: 412 cartons * 32 pcs = 13184 pcs
$47.00 - $62.00
-
WAVESHARE Waveshare 2.9 inch 296 x 128 Pixel Touch Black / White e-Paper Module for Raspberry Pi Pico, SPI Interface, 20051
1. 2.9 inch capacitive touch ePaper module, 296??128 resolution 2. 5-points touch support, user-defined wakeup gesture 3. No backlight, keeps displaying last content for a long time even when power down 4. Ultra low power consumption, basically power is only required for refreshing 5. SPI / I2C interface, requires minimal IO pins 6. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 15.40kgs / 33.95lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs40HQ: 2180 cartons * 200 pcs = 436000 pcs
$26.00
-
WAVESHARE WAVESHARE ESP32-P4-WIFI6 7-Inch Five-Point Touchscreen Development Board 1024x600 Resolution, Basic, Includes OV5647 Camera
Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 23.30kgs / 51.37lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs40HQ: 1197 cartons * 48 pcs = 57456 pcs
$69.00 - $81.00
-
YT200 320 x 180P LED HD Mini-Projektor, Stromversorgung über USB, unterstützt kabelgebundene Verbindung, Telefonbildschirm, Schwarz, Weiß
1. Mit diesem tragbaren Pico-Projektor können Kinder von ihren Mobiltelefonen und anderen elektronischen Geräten wegkommen, ideal zum Spielen, Ansehen von Videos, Musikhören und Lernen. 2. Klein, leicht zu tragen und überall einsetzbar. 3. Kompatibel mit Fire TV Stick/Kopfhörern/USB-Festplatte/Spielen/Kamera/Telefon/Tablet/Desktop-Computer/Verstärker 4. Handy-Co-Screening: unterstützt Handy-Datenkabel-Co-Screening 5. 100" Projektion: 100" auf nur 4m 6. High-Definition-Objektiv 30.000 Stunden Lampenlebensdauer Parameter. 1. Projektionsgröße: 14 ~ 100 Zoll 2. Standardmäßige physikalische Auflösung: 320 x 180p 3. Unterstützte Auflösungen: 1920 x 1080 max 4. Lumen: 15 +/- 3 Jahre Lumen 5. Lichtquelle: LED, 30.000 Stunden Lebensdauer 6. Projektionstechnologie: LCD 7. Betriebsspannung: DC5V 8. Betriebsstrom: 2A 9. Leistung: 10W 10. Fernbedienung: Bedienfeldtaste/Infrarot-Fernbedienung 11. Kopfhörerausgang: Audioausgang, 3,5-mm-Klinkenausgang 12. Maschinengröße: 110 x 110 x 47 mm 13. Produktgewicht: 0,2 kg Paket beinhaltet. Projektor x 1 1 x USB-Kabel Fernbedienung x 1 Bedienungsanleitung x 1 Spezifikation: Paketgewicht Gewicht eines Pakets 0,35 kg / 0,78 lb Einheitspackungsgröße 15 cm * 14 cm * 8 cm / 5,91 Zoll * 5,51 Zoll * 3,15 Zoll Menge pro Karton 30 Kartongewicht 10,32 kg / 22,75 lb Kartongröße 42 cm * 38 cm * 32 cm / 16,54 Zoll * 14,96 Zoll * 12,6 Zoll Container laden 20GP: 522 Kartons * 30 Stück = 15660 Stück 40HQ: 1212 Kartons * 30 Stück = 36360 Stück
$19.00
-
WAVESHARE Waveshare 7.5 inch 800x480 Pixel Red Black White E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, SPI Interface, 20129
Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. 2x user buttons and 1x reset button for easy interacting 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Advantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Specification1. Operating voltage: 3.3V 2. Display color: Red, black, white 3. Resolution: 800x480 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Outline dimensions: 170.2 x 111.2mm 10. Display size: 163.2 x 97.92mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.204 x 0.204 mmPackage List1. 7.5 inch e-Paper x1 2. Pico-ePaper-Driver-Board x1 3. Standoff pack x1Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
$66.00
-
Waveshare ST-LINK/V2 (EN), STM Programmers & Debuggers
Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs
$58.00
-
Waveshare Waveshare Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless, 15823
Overview1. This is a universal driver board for e-Paper raw panels, thanks to the dual wireless features - WiFi & Bluetooth - it is easy to display images from PC / smart phone via WiFi or Bluetooth.2. Furthermore, it can also be used for Arduino development, just like any other normal Arduino board.Features1. Onboard ESP32, supports Arduino development2. Provide Android APP, allows to refresh display content via Bluetooth EDR3. Provide HTML host code, allows to refresh display content via remote webpage, suit for Internet applications4. Support Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image5. Support popular image formats: BMP, JPEG, GIF, PNG, etc.6. Easy to be integrated into wireless applications7. Come with e-Paper driver (open source)8. Come with development resources and manualSpecifications1. WiFi protocol: 802.11b/g/n2. Bluetooth protocol: 4.2, includes traditional BR/EDR, and low power BLE3. Interface: 3-wire SPI, 4-wire SPI (default)4. Operating voltage: 5V5. Operating current: 50mA ~ 150mA6. Outline dimension: 29.46mm x 48.25mmPackage Contents1. e-Paper ESP32 Driver Board x12. e-Paper Adapter x13. 24PIN FFC x1Note: e-Paper panels in the photos are NOT included.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 720 pcs = 221760 pcs40HQ: 716 cartons * 720 pcs = 515520 pcs
$17.00
-
ANENG ANENG Automatic High-Precision Intelligent Digital Multimeter, DT9205A HOLD Key
1. Material: ABS shell2. Wire material: PVC/Brass3. Power supply: 9V 6F22 battery or AAA battery (not included)4. Working temperature: 0-40 degrees Celsius5. DC voltage: 200m-2-20-200-1000V6. AC voltage: 200m-2-20-200-700V7. DC current: 2m-20m-200m-20A8. Alternating current: 2m-20m-200m-20A9. Resistance: 200-2K-20K-200K-2M-20M-200M10. Capacity: 20n-200n-2u-20u-200uF11. Measuring resistance range: 200 ROM12. 3-digit LCD, display value 1999 (MAX)13. PVC shockproof sleeve, double fuses, safe and reliable14. Cable length: 70 cm15. Dimensions: about 172.9x87.7x33.3 mm16. Weight: 178 gramsPacking list- Digital multimeter x 1- Test lead x 1- User manual x 1Specification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 12cm * 5cm * 20cm / 4.72inch * 1.97inch * 7.87inch Qty per Carton 100 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 100 pcs = 24200 pcs40HQ: 562 cartons * 100 pcs = 56200 pcs
$6.00
-
High-Precision RX8025T Digital Clock Module LED Digital Tube Electronic Clock
1. Three-in-one electronic clock module, integrating three practical functions: time, thermometer and voltmeter2. Using RX8025T clock chip, the timing accuracy is stable3. The lengthened temperature probe can effectively solve the problem that the temperature affected by the module temperature is not accurate enough4. Power supply voltage: DC5.0-30V5. Temperature function range: -40-120 degrees Celsius, resolution 0.16. Voltmeter function range: DC5-30V (requires pure DC power supply, it is not recommended to use 24V battery, because the voltage may be too high during charging and burn)7. Size: about 4x1.4x1.3cmFunction and usage instructions:1. Adjust time, date, year, voltage error, temperature error cycle display item definition, alternate display interval time2. In the non-setting state, press the left key to enter the time adjustment (note that the colon in the middle is bright):- At this time, the minute bar starts to flash, press the right button to increase, the adjustment range is 00-59, after adjusting, press the left button again, the hour bar starts to flash, press the right button to increase, the adjustment range is 00-23- After adjusting the hour, press the left button again to enter the date adjustment (note that the colon in the middle is off), at this time the date column starts to flash, press the right button to increase, the adjustment range is 1-31, after the date is adjusted, press the left button again key, the month column starts to flash, press the right key to increase, the adjustment range is 1-12, after adjusting the date, press the left key again, the year column starts to flash, press the right key to increase, the adjustment range is 2012-2049- After adjusting the year, press the left key again to enter the error calibration function of the displayed voltage, the unit is 0.1V, a positive number means increase, and a negative number means decrease- Then press the left key again to enter the temperature error calibration setting, press the right key to increase, a positive number means increase, a negative number means decrease, the unit is Celsius- Press the left button again to enter the definition function dd option of the display item in the cycle display state,Press the right button to change the value: (dd:0) time + temperature + voltage, (dd: 1) time + temperature, (dd: 3) time + voltage- Press the left button again to enter the cycle display alternate interval time dF option, press the right button to change the value, the larger the value, the longer the interval- Press the left button again to save all the set values ??and return to the normal display state3. Switch display items: in the non-setting state, press the right key to switch the display items, and the display will switch between the time-date-temperature-voltage alternate displaySpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 6cm * 3cm * 3cm / 2.36inch * 1.18inch * 1.18inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 47cm * 23cm * 23cm / 18.5inch * 9.06inch * 9.06inch Loading Container 20GP: 1072 cartons * 500 pcs = 536000 pcs40HQ: 2489 cartons * 500 pcs = 1244500 pcs
$4.00
-
ZK-502C HIFI Wireless Bluetooth 5.0 TPA3116 Digital Power Audio Amplifier Board 50W X 2 Stereo AMP Amplificador, ZK-502C With Shell, ZK-502C Without Shell
1. Chip solution: TPA3116D2 (with AM interference suppression function)2. With or without filter: Yes (the sound is more mellow and clear after filtering)3. Adapted supply voltage: 5~27V4. Adapted speakers: 30W~200W, 4ohms, 8ohms5. Number of channels: left and right dual channels (stereo)6. Bluetooth version: 5.07. Bluetooth transmission distance: 15 meters (unobstructed)8. Protection mechanism: overvoltage, undervoltage, overheating, DC detection, short circuit protection9. Tip: Only when the audio input is sufficient and the power supply voltage/current is sufficient, there will be sufficient output power. The higher the power supply voltage, the higher the relative power, and speakers with different impedances will have different output powers. In the case of sufficient voltage and current, the greater the ohms of the speaker, the lower the relative sound power, please pay attention!10. Power supply voltage:-12V ------ 8 ohm speaker/12W (left channel) + 12W (right channel), 4 ohm speaker/20W+ 20W-15V ------ 8 ohms/18+ 18W, 4 ohms/more than 30 + 30W-19V ------ 8 ohms/32 + 32W, 4 ohms/more than 45 + 45W-24V ------ 8 ohms/38 + 38W, 4 ohms/more than 55 + 55WSpecification: Package Weight One Package Weight 0.12kgs / 0.25lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 52cm * 32cm / 20.47inch * 20.47inch * 12.6inch Loading Container 20GP: 308 cartons * 100 pcs = 30800 pcs40HQ: 715 cartons * 100 pcs = 71500 pcs
$10.00 - $13.00