Suchergebnisse für "Electronics"

1. It supports 10-point touch. The actual number of touch points depends on the software system2. The tempered glass panel has a hardness of 6H3. The screen is fully adhered, providing excellent display and dust-proof performance4. The IPS display panel offers excellent display performance with a viewing angle of up to 170°5. It is widely applicable and can be used in smart home, vehicle-mounted devices, consumer electronics, industrial equipment, and other fieldsParameters1. Contrast ratio: 1200:12. Display chip: JD93653. Touch chip: GT9284. Communication interface: 2-lane MIPI DSI5. Operating temperature: 0℃ - 60℃6. Resolution: 3.4 inches: 800 x 800 pixels (H x V); 4 inches: 720 x 720 pixels (H x V)7. Color gamut: 3.4 inches: 70% NTSC; 4 inches: 60% NTSC8. Brightness: 3.4 inches: 300cd/square meter; 4 inches: 550cd/square meter9. Dimensions: 3.4 inches: 11.5 x 11.5 cm; 4 inches: 12.6 x 12.6 cm10. Display size: 3.4 inches: 8.76 x 8.76 cm; 4 inches: 10.152 x 10.152 cmPackaging list:- Display screen x 1- Screw pack x 1- MX1.25 2PIN to MX1.25 4PIN 150mm x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2PIN to 2.54 3PIN connecting cable x 1- FFC 22PIN crossover cable (opposite direction) x 2Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 15cm * 4cm / 5.91inch * 5.91inch * 1.57inch Qty per Carton 48 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 48 pcs = 24960 pcs40HQ: 1209 cartons * 48 pcs = 58032 pcs

Lesen Sie Mehr Weniger

1. This product is a high-performance, highly integrated microcontroller development board independently designed by Waveshare. Within its compact form factor, it integrates peripherals including a 3.5-inch capacitive HD IPS display, highly integrated power management IC, low-power audio codec, camera interface, 6-axis IMU (3-axis accelerometer + 3-axis gyroscope), RTC, and Micro SD card slot, facilitating development and product integration. 2. Features Raspberry Pi-designed RP2350B microcontroller chip 3. Unique dual-core/dual-architecture: Dual ARM Cortex-M33 cores + dual Hazard3 RISC-V cores, both operating at up to 150MHz, enabling flexible architecture switching 4. Built-in 520KB SRAM and 16MB on-chip Flash 5. Type-C interface eliminates orientation concerns 6. Onboard 3.5-inch capacitive touch HD IPS screen with 320 × 480 resolution and 65K colors for clear image display 7. Integrated ST7796 display driver and FT6336 capacitive touch controller using SPI and I2C interfaces respectively, minimizing pin consumption 8. Camera interface compatible with mainstream modules (e.g., OV2640, OV5640) for image/video capture 9. Onboard 3.7V MX1.25 lithium battery charge/discharge interface 10. USB 1.1 host/device support 11. Low-power sleep/hibernation modes 12. Programmable via drag-and-drop when recognized as USB mass storage 13. 22 multifunctional GPIO pins: 2×SPI, 2×I2C, 2×UART, 7×12-bit ADC, 18×PWM channels 14. Precision on-chip clock/timer modules 15. Built-in temperature sensor for real-time chip monitoring 16. 12 programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 48 Carton Weight 5.90kgs / 13.01lb Carton Size 30cm * 42cm * 32cm / 11.81inch * 16.54inch * 12.6inch Loading Container 20GP: 661 cartons * 48 pcs = 31728 pcs40HQ: 1535 cartons * 48 pcs = 73680 pcs

Lesen Sie Mehr Weniger

1. Resolution: 800 × 8002. Display interface: DSI3. Display panel: IPS4. Viewing angle: 170 degrees5. Touch type: capacitive touch6. Touch points: ten-point touch7. Touch interface: I2C8. Touch panel: tempered glass panel9. Touch panel process: full lamination10. Application scenarios: smart home, automotive equipment, consumer electronics, industrial equipment, etc.11. Screen size: about 3.4 inches12. Size ：approx. 11.5 x 1.7cmFeatures:1. IPS display panel with good display performance and wide viewing angle up to 170 degrees2. Can support 10-point touch, the actual number of touch points with the software system3. Tempered glass panel, hardness up to 6H4. Screen full lamination, good display, dustproof5. Backlight brightness can be adjusted by software6. Support Raspberry Pi OS, ten-point touch, need to install the driver7. Support Pi 4B/3B+/3A+, some CM3/3+/4 expansion boards need to purchase additional adapter cableSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 13cm * 13cm * 2cm / 5.12inch * 5.12inch * 0.79inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs

Lesen Sie Mehr Weniger

Features:1. Large LCD, easy-to-read 3.5-inch high-definition display.2. Durable protective shell can prevent impact, friction and collision.3. Non-contact AC voltage detection, top sensor probe design, more securely identify AC voltage.4. The high-resolution large screen can display 3 test results on the screen, including voltage, frequency, and analog bars.parameter:1. Dimensions: 143.4 x 70.9 x 15.7mm2. Display: 9999 times3. Screen: 3.5 inches4. Resolution: 0.11ohms5. S10 power supply: 1.5V (AAA) x 2 (not included)6. S11 power supply: 800 mA lithium battery7. Diode: automatically recognize the diode when it is lower than 3.0V8. DC voltage: 0.8V-620V +/-(0.5%+3), resolution: 0.001V9. AC voltage: 2.2V-620V +/-(0.5%+5), resolution: 0.001V10. Resistance: 1Ω-999.9ohms +/-(2.0%+5), 1kohms-60Mohms +/-(1.0%+3)11. V-Alert (non-contact voltage detection): buzzer alarm sound，on-site inspection: alarm buzzer, LCD screen display stripes12. Continuity: If the resistance is less than 30ohms, the buzzer will sound13. Frequency:- 1Hz-1000Hz +/-(1.0%+5) (ACV:2V-10V); resolution: 0.001Hz- 1KHz-60KHz +/-(1.0%+5) (ACV:10V-620V); resolution: 0.001HzPacking list:S10:S10 Multimeter x 1Test cable x 1Manual x1S11:S11 Multimeter x 1Test cable x 1Type-C charging cable x 1EVA cloth bag x 1Protective shell x 1Manual x1Note: The actual product is subject to the title model, the model machine of the picture is only for effect referenceSpecification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 17cm * 10cm * 4.5cm / 6.69inch * 3.94inch * 1.77inch Qty per Carton 80 Carton Weight 28.00kgs / 61.73lb Carton Size 47cm * 42cm * 35cm / 18.5inch * 16.54inch * 13.78inch Loading Container 20GP: 385 cartons * 80 pcs = 30800 pcs40HQ: 896 cartons * 80 pcs = 71680 pcs

Lesen Sie Mehr Weniger

Overview1. Smart robot is always the favorite project of electronic enthusiasts, however, a robot will be "not that smart" if it is not AI-based.2. Welcome the JetBot, an actual smart robot powered by Jetson Nano. With the intelligent eye (front camera), facial recognition, object tracking, auto line following, and collision avoidance can be easily achieved. It also comes with ROS nodes code, which makes it easy to get started with the open source ROS (Robot Operating System), and to learn the system framework and concepts of ROS.3. If you have got a Jetson Nano on your desk right now, combined with our open source codes and tutorials, these add-ons would be the ideal choice for you to learn AI robot designing and development.Features1. Adopts 3x 18650 batteries (NOT included), high battery capacity, up to 12.6V voltage output, more powerful driving force.2. Integrates S-8254AA + AO4407A lithium battery protection circuit, provides protections for over-charge, over-discharge, over-current, and short circuit.3. Onboard APW7313 voltage regulator, provides stable 5V voltage for the Jetson Nano.4. Onboard TB6612FNG dual H-bridge motor driver.5. Onboard 0.91inch 128×32 pixels OLED, allows to display robot IP address, RAM, battery life, etc.6. Onboard ADS1115 AD acquisition chip for monitoring the battery in real time.7. Weight: 773gWhat is on the JetBot Expansion Board1. S-8254AA: Lithium battery protector, provides protections for over-charge, over-discharge, over-current, and short circuit2. ADS1115: 16-bit AD acquisition chip, monitoring the battery in real time3. AO4407A:: P-Channel MOSFET for protection circuit4. APW7313:: 5V power regulator for powering the Jetson Nano5. PCA9685: PWM controller, I2C interface, for IO expansion6. TB6612FNG: dual H-bridge motor driver7. 0.91inch OLED: SSD1306 driver chip, 128×32 pixels8. Battery charger input: charging the 3x 18650 batteries9. Power switch10. 18650 battery holder11. Motor connector (bottom side)12. Jetson Nano communication header: I2C interface and power supplyPacking List1. Metal box x12. Camera holder x13. Acrylic piece x14. Jetbot expansion board x15. IMX219-160 Camera x16. Wireless-AC8265 x17. Motor 2PCS x18. Wheel 2PCS x19. Omni-direction wheel 2PCS x110. Power adapter EU head x111. 12.6V battery charger x112. Wireless gamepad x113. Screwdriver 2PCS x114. 6Pin 9cm cable x115. Screws pack x116. Spanner x117. Cooling fan x118. Micro SD card reader x1Specification: Package Weight One Package Weight 1.04kgs / 2.30lb One Package Size 22cm * 16cm * 4cm / 8.66inch * 6.3inch * 1.57inch Qty per Carton 20 Carton Weight 21.50kgs / 47.40lb Carton Size 62cm * 42cm * 42cm / 24.41inch * 16.54inch * 16.54inch Loading Container 20GP: 243 cartons * 20 pcs = 4860 pcs40HQ: 566 cartons * 20 pcs = 11320 pcs

Lesen Sie Mehr Weniger

1. Automatically identify components, automatically select based on component characteristics, making the measurement process more convenient and efficient2. Multiple frequency tests, effective value test levels. Supports five test frequencies: 100Hz, 120KHz, 1kHz, 10kHz, and 100KHz. It is suitable for the measurement requirements of different application scenarios. With effective value test levels of 0.1V, 0.3V, and 0.6Vrms, the measurement results are more accurate and reliable3. Four-segment digital display, with high precision, capable of simultaneously showing main and auxiliary parameters4. Internal bias function, eliminating material nonlinearity, restoring true capacity, enabling precise measurement and control of nonlinear components, weak signals, or complex environments5. One-click locking and recording, making measurement more efficient. Press lightly to lock the current reading, press for a long time to activate the recording mode. The test results are classified and statistically analyzed in real time. The measurement is accurate, clear to view, and the detection efficiency is doubled. It enables you to easily control each measurement6. Five test scenarios, supporting precise measurement of capacitors, resistors, inductors impedance, electrolytic capacitors, etc7. Compact handheld design, allowing for precise measurement anytime and anywhere8. Open circuit/closed circuit correction function, used to eliminate systematic errors introduced by test fixtures and cables, which directly affect the accuracy of the measurement resultsParameters1. Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 100KHz2. Basic accuracy: 0.3%3. Display screen: 2.8 inch TFT liquid crystal display4. Display digits: main parameter: 4 1/2 digits, secondary parameter: 4 1/2 digits5. Test level: 0.1V, 0.3V, 0.6V6. Calibration function: open circuit calibration, short circuit calibration7. Internal bias: 0.0V, 0.5V8. Test port configuration: three-terminal, five-terminal9. Output impedance: 100Ω10. Communication interface: USB-TypeC (virtual serial port)11. Comparison function: used to calculate the relative error between the measured value of the component and the nominal value, displayed in percentage, and provide screening results. Nominal value and tolerance can be set, and the tolerance range can be defined from 0.1% to 99.9%12. Recording function: check whether the data of the tested component conforms to the set nominal value and tolerance, record the number of successful and failed measurement data13. Battery capacity: 3000mAh14. Supported languages: Chinese, EnglishSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 24cm * 16cm * 8cm / 9.45inch * 6.3inch * 3.15inch Qty per Carton 16 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 16 pcs = 7376 pcs40HQ: 1071 cartons * 16 pcs = 17136 pcs

Lesen Sie Mehr Weniger

1. DC voltage: 0.3mV~600V2. AC voltage: 3mV~600V3. DC current: 3mA~10A4. AC current: 3mA~10A5. Resistance: 0Ω~60ΜΩ6. Capacitance: 0nF~20mF7. Hz: 10Hz-7MHz8. % duty cycle: 10%~90%9. The small multimeter has a VA reverse color screen, and the screen value can be clearly seen in a dark environment10. The test pen fits tightly with the multimeter jack, so there is no worry of falling off, and the service life is longer11. There is an extended support frame on the back, which can be adjusted in angle after being pulled out and fixed to stand12. The main control chip is used, the performance is more stable, and it has a higher and more stable user experience. The built-in anti-burning fuse makes the measurement more secure13. NCV non-contact voltage detection, place the NCV sensing area close to the AC voltage, the meter will beep and alarm, the screen will display the L indicator light green when the signal is weak; the screen will display the H indicator light red when the signal is strong14. USB charging has strong battery life, built-in 3.7V1000mA lithium battery, the indicator light is red during charging, and bright green when full15. Press the flashlight button to turn on the lighting, no longer afraid of not being able to see the measurement location, eliminate the risk of electric shock, and assist in night measurement work16. The meter will automatically shut down after about 15 minutes without any operation, saving energy and electricity17. Size: 8.9x9.05x4 cm18. Packing list: multimeter; instruction manual; charging cable; test lead cable; temperature cable; packaging boxSpecification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 17cm * 17cm * 6cm / 6.69inch * 6.69inch * 2.36inch Qty per Carton 50 Carton Weight 20.00kgs / 44.09lb Carton Size 52cm * 35cm * 50cm / 20.47inch * 13.78inch * 19.69inch Loading Container 20GP: 293 cartons * 50 pcs = 14650 pcs40HQ: 680 cartons * 50 pcs = 34000 pcs

Lesen Sie Mehr Weniger

1. No backlight, keeps displaying last content for a long time even when power down2. Ultra low power consumption, basically power is only required for refreshing3. Comes with online development resources and manual (driver board schematic diagram and examples for Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32, etc.)Optional for e-Paper driver board:1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi and Jetson Nano series boards2. Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi3. Adapting SPI interface for connecting with controller boards like Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32, etc.4. Onboard voltage translator, compatible with 3.3V / 5V MCUsSpecifications:1. Operating voltage: Raw display: 3.3V3.3V；with driver board: 3.3V / 5V2. Display colors: Red, yellow, black, white3. Communication interface: 3-wire SPI, 4-wire SPI4. Grayscale levels: 25. Dimensions: Raw display: 105.33 × 62.37 × 0.91 mm; with driver board: 107.00 × 64.00 mm6. Full refresh time: 20s7. Display area: 92.80 × 55.68 mm8. Refresh power consumption: Less than 90mW9. Dot pitch: 0.116 × 0.116 mm10. Sleep current: Less than 0.01μA (near zero)11. Resolution: 800 × 480 pixels12. Viewing angle: Greater than 170-Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 14cm * 10cm * 3cm / 5.51inch * 3.94inch * 1.18inch Qty per Carton 128 Carton Weight 11.30kgs / 24.91lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 128 pcs = 59008 pcs40HQ: 1071 cartons * 128 pcs = 137088 pcs

Lesen Sie Mehr Weniger

1. Equipped with the high-performance Xtensa 32-bit LX7 dual-core processor of ESP32-S3R8, with a main frequency of up to 240 MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with built-in antenna3. Equipped with 512KB of SRAM and 384KB of ROM, and stacked 8MB PSRAM and externally connected 16MB Flash4. Uses Type-C interface, eliminating the need to worry about the front or back insertion, improving the users convenience and device compatibility5. Equipped with a 1.54-inch LCD screen, 240 x 240 resolution, 262K color, capable of clearly displaying color images6. Equipped with ES7210 audio encoding chip, supporting dual-microphone audio acquisition and echo cancellation function7. Equipped with ES8311 audio codec chip, NS4150B power amplifier chip, microphone and speaker, enabling smooth gaming with Xiaozhi AI8. Equipped with QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), capable of detecting motion posture to expand applications9. Exposed I2C, UART and other pads, available for external devices and debugging use, flexible configuration of peripheral functions10. Equipped with 3 customizable function buttons, capable of achieving single-click, double-click, long press and other operations11. Equipped with 3.7V MX1.25 lithium battery charging and discharging interface12. Equipped with Micro SD card slot, enabling storage expansion, high-speed data transmission, improving flexibility of use, suitable for data recording and media playback, simplifying circuit designLCD screen parameters1. Display panel: IPS2. Display resolution: 240 x 240 pixels3. Display size: 1.54 inches4. Communication interface: 4-Wire SPI5. Touch type: capacitive sensing6. Display colors: 262K9. Driving IC: ST778910. Touch IC: CST81611. Effective screen size: about 2.772 x 2.772 cmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 126 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 126 pcs = 56700 pcs40HQ: 1045 cartons * 126 pcs = 131670 pcs

Lesen Sie Mehr Weniger

1. Brush: copper2. Resistor: bakelite3. Rotation angle: 200 degrees4. Rotational torque: 60-150 g/cm5. Stop strength: 500 g/cm6. Mechanical strength: resistor can withstand 1 kg of pressure without breaking7. Resistance range (Ohms): 100R-1M8. Resistance variation characteristics: B9. Operating voltage: 50V (MAX)10. Rated: 0.1W11. Residual resistance: no more than 5 percent of the nominal resistance, no more than 30 ohms12. Rotational Life: 15 percent resistance change after 100 rotations without load13. Load Life: 5 percent resistance change after 3 hours of rated power14. Adjustable resistors have a wide range of applications, including home appliances and the electronic security industry. Specific products include televisions, induction cookers, rice cookers, and more.Packing List:- 10 x 500R ohm- 10 x 1K ohms- 10 x 2K ohm- 10 x 5K ohms- 10 x 10K ohm- 10 x 20K ohm- 10 x 50K ohm- 10 x 100K ohms- 10 x 200K ohms- 10 x 1M ohmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 8cm * 5cm / 5.91inch * 3.15inch * 1.97inch Qty per Carton 72 Carton Weight 5.50kgs / 12.13lb Carton Size 47cm * 34cm * 32cm / 18.5inch * 13.39inch * 12.6inch Loading Container 20GP: 521 cartons * 72 pcs = 37512 pcs40HQ: 1210 cartons * 72 pcs = 87120 pcs

Lesen Sie Mehr Weniger

1.5 inch RGB OLED display module, 128x128 pixels, 16-bit high color, SPI interfaceOverviewThis is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.Features1. 128x128 high resolution, 65K colors, clearly displays colorful images2. Support 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor3. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Driver: SSD13512. Interface: 4-wire SPI, 3-wire SPI3. Display color: RGB, 65K colors4. Resolution: 128x1285. Viewing angle: >160 degree6. Operating voltage: 3.3V / 5V7. Dimension: 44.5 x 37 (mm)Package Contents1. 1.5 inch RGB OLED Module x12. PH2.0 7Pin x1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs

Lesen Sie Mehr Weniger

1. This is a 1.54inch IPS touch color display module featuring 240×240 high resolution, supporting 262K true color display. It delivers clear and delicate visuals with excellent performance. Equipped with a high-transmittance capacitive touch panel, it offers responsive touch sensing and long service life. The module integrates the ST7789S display driver IC and the CST816D capacitive touch IC, communicating via SPI and I2C interfaces respectively, which minimizes pin usage and simplifies hardware integration. An onboard level shifter ensures compatibility with both 3.3V and 5V power inputs, allowing seamless connection to mainstream controller platforms such as Raspberry Pi, ESP32, Pico, Arduino, and STM32.2. Operating voltage: 3.3V / 5V3. Resolution: 240 × 240 pixels4. Display driver: ST7789S5. Touch controller: CST816D6. Display interface: 4-wire SPI7. Touch interface: I2C8. Display panel: IPS9. Touch type: Capacitive10. Display size: 27.72 × 27.72 mm11. Pixel size: 0.1155 × 0.1155 mm12. Product dimensions: 40.2 × 40.2 mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 7.10kgs / 15.65lb Carton Size 34cm * 42cm * 32cm / 13.39inch * 16.54inch * 12.6inch Loading Container 20GP: 583 cartons * 120 pcs = 69960 pcs40HQ: 1354 cartons * 120 pcs = 162480 pcs

Lesen Sie Mehr Weniger