WAVESHARE
-
Waveshare Waveshare SX1262 LoRa HAT 915MHz Frequency Band for Raspberry Pi, Applicable for America / Oceania / Asia, 915MHz
Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs
£21.99
-
Waveshare Waveshare BMP388 High Precision Barometric Pressure Sensor, Accurate Altitude Tracing, BMP388
BMP388 High Precision Barometric Pressure Sensor, Altitude / Barometric Pressure / Temperature Measuring, I2C/SPI InterfaceOverview1. This is a 24-bit high precision barometric pressure sensor, which allows accurate altitude tracing, as well as barometric pressure / temperature measuring. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.2. Due to its ultra small form factor, low power consumption, low noise and high precision, the BMP388 Barometric Pressure Sensor is suited for applications such as drones, accurate altimeter, environment monitoring, and IoT projects, and so on.Features1. Supports I2C (default) / SPI interface2. Onboard voltage level translator, compatible with 3.3V/5V operating voltage3. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Operating voltage: 3.3V/5V2. Communication interface: I2C/SPI3. Barometric pressure operation range: 300~1250hPa4. Barometric pressure absolute accuracy: +/-0.40hPa (@900~1100hPa, 25~40 degree C)5. Barometric pressure relative accuracy: +/-0.08hPa (@900~1100hPa, 25~40 degree C)6. Temperature coefficient offset: ±0.75Pa/K (@700~1100hPa, -20~65 degree C)7. Temperature absolute accuracy: +/-0.5 degree C (0~65 degree C）8. Possible resolution: 0.016Pa (high precision mode)9. Possible sampling rate: 200Hz10. Operating voltage: -40~85 degree C11. Dimension: 32mm × 20mm12. Mounting hole size: 2.0mmPinouts1. VCC: 3.3V/5V power supply2. GND: Ground3. SDA: I2C data4. SCL: I2C clock5. INT: Interrupt output, can be connected to I/OPackage Contents1. BMP388 Barometric Pressure Sensor x12. PH2.0 5PIN wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs
£12.99
-
Waveshare Waveshare MQ-135 Gas Sensor, MQ-135
Overview1. Sensitive for benzene, alcohol, smoke2. Output voltage boosts along with the concentration of the measured gases increases3. Fast response and recovery4. Adjustable sensitivity5. Signal output indicatorSpecifications1. Power: 2.5V ~ 5.0V2. Dimension: 40.0mm * 21.0mm3. Mounting holes size: 2.0mmApplicationsAir quality monitorHow to UseIn the case of working with a MCU:1. VCC: 2.5V ~ 5.0V2. GND: Power supply ground3. AOUT: MCU.IO (analog output)4. DOUT: MCU.IO (digital output)Package Contents1. MQ-135 Gas Sensor x12. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 5cm * 4cm * 1cm / 1.97inch * 1.57inch * 0.39inch Qty per Carton 4800 Carton Weight 158.40kgs / 349.21lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4800 pcs = 1329600 pcs40HQ: 644 cartons * 4800 pcs = 3091200 pcs
£4.99
-
Waveshare Waveshare 2-DOF Pan-Tilt HAT for Raspberry Pi, Light Intensity Sensing, I2C Interface, 16138
OverviewThis is a 2-DOF pan-tilt kit designed for Raspberry Pi. With onboard PCA9685 PWM chip and TSL2581 ambient light sensor, it allows the Pi to control camera movement and sense light intensity through I2C interface.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+2. I2C interface, only 2 pins are required for moving and light intensity sensing3. Onboard PCA9685 chip, provides 12-bit resolution PWM signal for moving control4. Onboard TSL2581FN light-to-digital converter, with embedded ADC, provides a value that approximates the human eye response to assist the module5. Onboard voltage level translator, compatible with 3.3V/5V operating voltage6. Specific acrylic board to fix the Raspberry Pi camera, make it easy to install7. Comes with development resources and manual (demo code, assembly guide)Specifications1. PWM driver: PCA96852. PWM resolution: 12-bit3. Ambient light sensor: TSL2581FN4. Ambient light resolution: 16-bit5. Communication interface: I2C6. Operating voltage: 3.3V/5V7. Dimension: 56.6mm x 65mmHow to AssembleA little assembly work is required to use the Pan-Tilt HAT, yet its pretty easy to do, heres the assembly guide.Package Contents1. Pan-Tilt HAT x12. 2-DOF pan-tilt kit x13. SG90 servo x14. MG90S servo x15. Acrylic board x16. M2 screws pack x17. RPi screws pack (2pcs) x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 8cm * 7cm * 2cm / 3.15inch * 2.76inch * 0.79inch Qty per Carton 700 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 35cm * 40cm / 22.05inch * 13.78inch * 15.75inch Loading Container 20GP: 340 cartons * 700 pcs = 238000 pcs40HQ: 789 cartons * 700 pcs = 552300 pcs
£13.99
-
Waveshare Waveshare Raspberry Zero V1.3 Mini Camera Module
1. Raspberry Pi Camera, supports only Raspberry Pi Zero V1.3 and Raspberry Pi Zero W2. 5 megapixel OV5647 sensor3. Camera specifications- CCD size : 1/4inch- Focal Length : 3.51mm- Angle of View (diagonal) : 69.1 degree- Sensor best resolution : 1080p4. 2592 × 1944 still picture resolution5. Support 1080p30fps, 720p60fps and 640x480p60/90fps video record6. Dimension: 60mm × 11.5mm × 5mmSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 2cm * 1cm / 3.15inch * 0.79inch * 0.39inch Qty per Carton 5600 Carton Weight 145.60kgs / 320.99lb Carton Size 56cm * 40cm * 40cm / 22.05inch * 15.75inch * 15.75inch Loading Container 20GP: 297 cartons * 5600 pcs = 1663200 pcs40HQ: 690 cartons * 5600 pcs = 3864000 pcs
£9.99
-
Waveshare Waveshare Adjustable-Focus RPi Camera (B) Module
1. Raspberry Pi Camera, supports all revisions of the Pi2. 5 megapixel OV5647 sensor3. Adjustable focus distance4. Camera specifications- CCD size: 1/4inch- Aperture (F): 2.0- Focal Length: 6mm- Angle of View (diagonal): 60.6 degree- Sensor best resolution: 1080p5. Dimension: 32mm x 32mmSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 4cm * 4cm * 1cm / 1.57inch * 1.57inch * 0.39inch Qty per Carton 4000 Carton Weight 15.00kgs / 33.07lb Carton Size 40cm * 40cm * 40cm / 15.75inch * 15.75inch * 15.75inch Loading Container 20GP: 416 cartons * 4000 pcs = 1664000 pcs40HQ: 967 cartons * 4000 pcs = 3868000 pcs
£11.99
-
Waveshare Waveshare Tracker Sensor, Infrared Line Tracking
1. 5-ch ITR20001/T infrared detector, high sensitivity, anti-jamming, stable performance2. High precision analog output, combined with PID control algorithm, allows the robot tracks lines more stableSpecifications1. Power: 3.3V ~ 5V2. Dimension: 78mm × 18mm3. Detector spacing: 16mm4. Mounting holes size: 3mm5. Detection range: 1cm ~ 5cmApplicationsRobot line trackingHow to UseIn the case of working with a MCU:- VCC ? 3.3V ~ 5V- GND ? GND- IR1 ? MCU.IO (ch1, analog output)- IR2 ? MCU.IO (ch2, analog output)- IR3 ? MCU.IO (ch3, analog output)- IR4 ? MCU.IO (ch4, analog output)- IR5 ? MCU.IO (ch5, analog output)Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 4cm * 2cm / 3.94inch * 1.57inch * 0.79inch Qty per Carton 1200 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1200 pcs = 332400 pcs40HQ: 644 cartons * 1200 pcs = 772800 pcs
£3.99
-
Waveshare Waveshare 23991 LCD1602 I2C Module, White with Blue Background, 16x2 Characters, 3.3V/5V, 23991
1. VCC: 3.3V - 5V power input2. GND: ground wire3. SCL: I2C clock pin4. SDA: I2C data pin5. Communication interface: I2C6. LCD controller: AiP310687. Working voltage: 3.3-5V8. Working temperature: minus 20-70 degrees Celsius9. Display panel: Character LCD10. Display size: 64.5 x 16.0mm11. Characters: 16 x 212. Product size: 87.0 x 32.0 x 13.0mm13. Built-in character LCD panel LCD160214. I2C control interface, only need two signal pins, saving IO resources15. Compatible with 3.3V/5V working voltage16. Comes with online development resources and manuals (Raspberry Pi/Jetson Nano/ESP32/Arduino examples)Specification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 4cm * 3cm / 3.94inch * 1.57inch * 1.18inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 30cm * 50cm * 56.7cm / 11.81inch * 19.69inch * 22.32inch Loading Container 20GP: 313 cartons * 500 pcs = 156500 pcs40HQ: 727 cartons * 500 pcs = 363500 pcs
£6.99
-
WAVESHARE Waveshare Aluminum Case Type F for Jetson Nano Development Kit
About The Product1. The case is currently only compatible with the old version of the Jetson Nano Developer Kit B01, which is made from Waveshare. Other third-party kits or the new version of the Jetson Nano Developer Kit B01 are not currently supported. 2. The difference between the new version of the Jetson Nano Developer Kit B01 and the old version of the Developer Kit B01: - Please pay attention to checking the HDMI and DP sockets of the kit. If the HDMI/DP socket covered with a metal outer layer is a new version. But this case is not currently supported. If there is no metal cladding on the sockets--the old version of the B01 kit, the case can be supported. - If you are using the A02 version of the Jetson Nano developer kit, note that the positions of the button interfaces are different.Features1. High-quality aluminum Case Designed for the Jetson Nano 2. Chamfered corners, more comfortable and smoother 3. Reserved airflow outlets on three sides, and built-in fan is opened on the top for excellent heat dissipation 4. Exquisite workmanship, beautiful fit 5. Equipped with silicone non-slip feet, more stable placement: Reduce the heat dissipation of the bottom contact areaPackage List1. Aluminum body case(top and bottom) x 1 2. GPIO adapter x 1 3. Button cable x 1 4. Nonskid feet 4pcs x 1 5. Button 2pcs x 1 6. Button board x 1 7. Allen spanner x 1 8. Allen screws pack x 1Specification: Package Weight One Package Weight 0.31kgs / 0.69lb One Package Size 16cm * 12cm * 7cm / 6.3inch * 4.72inch * 2.76inch Qty per Carton 40 Carton Weight 13.20kgs / 29.10lb Carton Size 50cm * 36cm * 22cm / 19.69inch * 14.17inch * 8.66inch Loading Container 20GP: 673 cartons * 40 pcs = 26920 pcs40HQ: 1563 cartons * 40 pcs = 62520 pcs
£19.99
-
WAVESHARE Waveshare RP2040-Zero Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader mini Version, 20335
1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Castellated module allows soldering direct to carrier boards 6. USB 1.1 with device and host support 7. Low-power sleep and dormant modes 8. Drag-and-drop programming using mass storage over USB 9. 29 x multi-function GPIO pins (20 x via edge pinout, others via solder points) 10. 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels 11. Accurate clock and timer on-chip 12. Temperature sensor 13. Accelerated floating-point libraries on-chip 14. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs40HQ: 763 cartons * 500 pcs = 381500 pcs
£3.99
-
WAVESHARE WAVESHARE 2.8 inch 262K Colors 320 x 240 Pixel Touch Display Module for Raspberry Pi Pico, SPI Interface, 2.8 inch
Features1. 320x240 resolution, IPS screen, 262K colors, clear and colorful displaying effect 2. Dedicated touch controller, bringing more smooth touching effect than AD-controlled solutions 3. MicroSD card slot for storing images and direct displaying them easily 4. Programmable backlight control, power saving 5. Come with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 5V 2. Resolution: 320x240 pixels 3. Display color: 265K colorful 4. Communication interface: SPI 5. Display panel: IPS 6. Display size: 57.60 x 43.20 mm 7. Pixel size: 0.18x 0.18 mm 8. Driver: ST7789 9. Touch Controller: XPT2046 10. Size: 70.20 x 50.20 mmPackage List1. Pico-ResTouch-LCD-2.8 x1 2. Standoffs pack x1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs40HQ: 1439 cartons * 200 pcs = 287800 pcs
£11.99
-
WAVESHARE WAVESHARE 3.5 inch 65K Colors 480 x 320 Touch Display Module for Raspberry Pi Pico, SPI Interface, 3.5 inch
Features1. 480 x 320 resolution, IPS screen, 65K colors, clear and colorful displaying effect 2. Dedicated touch controller, bringing more smooth touching effect than AD-controlled solutions 3. MicroSD card slot for storing images and direct displaying them easily 4. Programmable backlight control, power saving 5. Come with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 5V 2. Resolution: 480x320 pixels 3. Display color: 65K colorful 4. Communication interface: SPI 5. Display panel: IPS 6. Display size: 73.44 x 48.96 mm 7. Pixel size: 0.153 x 0.153 mm 8. Controller: ILI9488 9. Size: 86.00 x 57.20 mmPackage List1. Pico-ResTouch-LCD-3.5 x1 2. Standoffs pack x1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs40HQ: 1439 cartons * 200 pcs = 287800 pcs
£18.99
-
WAVESHARE PCIe T 2.5G ETH Board For Raspberry Pi 5, 33042
1. Main controller chip: RTL8125 2. Ethernet port type: RJ45 2.5G Ethernet port 3. PCIe interface: PCIe ×1 Gen2 4. Power supply: 5V 5. Network standards: 10/100/1000/2500 Mbps 6. Status lights: green (flashes during communication); yellow (steady when connected)7. Size: approx. 8.5 x 3.75 cmFeatures:1. Connects to the Raspberry Pi via a 16-pin ribbon cable2. Equipped with a genuine Realtek RTL8125 high-performance controller chip3. Includes a transparent acrylic support plate; features a side-mount design that does not occupy space on the top of the board4. Powered by the PCIe ribbon cable by default5. Supports for Raspberry Pi OS without drivers; plug-and-playSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 6cm * 2cm / 4.72inch * 2.36inch * 0.79inch Qty per Carton 380 Carton Weight 23.80kgs / 52.47lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 380 pcs = 156560 pcs40HQ: 958 cartons * 380 pcs = 364040 pcs
£9.99
-
Waveshare Waveshare Industrial 8-Ch Analog Output Module 12-Bit DA Conversion, Modbus RTU Analog Output 8CH, Modbus RTU Analog Output 8CH (B)
1. Modbus RTU Analog Output 8CH is an industrial standard analog output module, supports 8-ch simultaneous output. Adopts Modbus RTU protocol with built-in protection circuits such as power isolation, magnetical isolation, resettable fuse, and TVS.2. Supports setting device address (1 to 255) to cascade multiple devices via RS485 bus.3. On-board voltage regulator chip supports wide voltage supply from 7 to 36V.4. On-board integrated power isolation provides stable isolation voltage; the isolated end requires no additional power supply.5. On-board integrated magnetic coupling isolation enables signal isolation, with high reliability and strong anti-interference capability.6. On-board self-recovery fuse and TVS (Transient Voltage Suppressor) effectively suppress surge voltage and transient spike voltage in the circuit, protecting against overcurrent, overvoltage, lightning, and static electricity.7. 12-bit DA conversion with high-precision resistors ensures more accurate output data.8. Built-in watchdog ensures stable output without crashing.9. Rail-mounted enclosure design supports stackable combination, enabling easy installation and safer use.10. External 3 LED indicators for convenient viewing of MCU status and signal transmission/reception status. Parameters:1. Communication Interface: RS4852. Communication Baud Rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560003. Default Communication Format: 9600, N, 8, 14. Modbus Protocol: Standard Modbus RTU Protocol 5. Supply Voltage: DC 7 to 36V6. Output Mode: 8-channel current output / 8-channel voltage output 7. Resolution: 12-bit, 1 microampere / 12-bit, 1 millivolt 8. Range: 0~20mA / 0~10V9. Output Accuracy: +/-0.03mA / +/-0.01VSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 16cm * 10cm * 6cm / 6.3inch * 3.94inch * 2.36inch Qty per Carton 48 Carton Weight 6.90kgs / 15.21lb Carton Size 32cm * 42cm * 38cm / 12.6inch * 16.54inch * 14.96inch Loading Container 20GP: 522 cartons * 48 pcs = 25056 pcs40HQ: 1212 cartons * 48 pcs = 58176 pcs
£21.99
-
Waveshare Waveshare Industrial 4-Ch PWM Output Module Modbus RTU RS485, Adjustable Frequency & Duty Cycle, Modbus RTU PWM Output 4CH
1. This product is an industrial standard isolated RS485 to PWM pulse output module. Four channels of frequency and duty cycle are independently adjustable. It adopts Modbus RTU protocol and includes built-in protection circuits such as power isolation, magnetic coupling isolation, self-recovery fuse, and TVS.2. The output uses high-speed optocoupler isolation, and the output high-level voltage can be selected via internal jumpers.3. Four channels of PWM pulse output with frequency and duty cycle independently adjustable.4. Supports setting device address (1 to 255) to cascade multiple devices via the RS485 bus.5. On-board voltage regulator chip supports wide voltage supply from 7V to 36V.6. On-board integrated power isolation provides stable isolation voltage; the isolated end requires no additional power supply.7. On-board integrated magnetic coupling isolation enables signal isolation, with high reliability and strong anti-interference capability.8. On-board self-recovery fuse and TVS (Transient Voltage Suppressor) effectively suppress surge voltage and transient spike voltage in the circuit, protecting against overcurrent, overvoltage, lightning, and static electricity.9. Built-in watchdog ensures stable output without crashing.10. Rail-mounted enclosure design, compact size, easy installation.11. External 3 LED indicators for convenient viewing of power status and signal transmission/reception status. Parameters:1. Communication Interface: RS485 2. Communication Baud Rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 256000 3. Default Communication Format: 9600, N, 8, 1 4. Modbus Protocol: Standard Modbus RTU Protocol 5. Supply Voltage: DC 7V to 36V 6. Output Voltage: Default 3.3V, can be set to 5V via internal jumper 7. Output Current: Signal type, less than 30mA 8. Pulse Frequency: 1Hz to 200KHz 9. Frequency Resolution: 0.01Hz 10. Frequency Accuracy: 0.5 percent (equivalent to 5 per mille)11. Duty Cycle: 0 to 100 percent 12. Duty Cycle Resolution: 0.01 percent 13. Duty Cycle Accuracy: 0.5 percent (1Hz to 50KHz), 1 percent (50KHz to 200KHz)Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 1cm * 6cm / 4.72inch * 0.39inch * 2.36inch Qty per Carton 72 Carton Weight 8.30kgs / 18.30lb Carton Size 38cm * 32cm * 50cm / 14.96inch * 12.6inch * 19.69inch Loading Container 20GP: 438 cartons * 72 pcs = 31536 pcs40HQ: 1018 cartons * 72 pcs = 73296 pcs
£21.99
-
WAVESHARE WAVESHARE RPLIDAR High-Performance Compact-size DTOF Lidar, Support UART Port / Ethernet Port Communication Modes, S2, S2L, S2E, S2P
1. Measurement range:- 90% reflectance: S2L: 0.05–18 m; S2/S2E: 0.05–30 m; S2P: 0.05–50 m- 10% reflectivity: S2L: 0.05–8 m; S2/S2E: 0.05–10 m; S2P: 0.05–15 m2. Measurement dead zone: 0.05 m3. Sampling rate: 32,000 times/second4. Scan frequency: 10 Hz 5. Angular resolution: 0.12° 6. Distance measurement accuracy: ±30 mm 7. Distance measurement resolution: 13 mm 8. Communication interface: S2L/S2/S2P: UART serial port (1M); S2E: Ethernet UDP (10/100M) 9. Operating voltages: 5V, 12V 10. Power consumption: >2W 11. Protection rating: IP6512. Operating temperature: -10°C to 50°C 13. Application scenarios: for indoor and outdoor environments; reliable resistance to sunlight14. Size: about 77 x 38.85 mmFeatures:1. Supports multiple communication methods including serial and Ethernet ports, facilitating use in various environments2. Measurement range of 18m to 50m, meeting the needs of robotic applications in commercial settings such as hotels, restaurants, shopping malls, and office buildings3. Utilizes DTOF (Direct Time of Flight) ranging technology to ensure excellent LiDAR measurement accuracy at any distance, while effectively detecting low-reflectivity, specular, and even highly transparent objects4. Comprehensively improved internal optics and algorithm systems, with a sampling rate of up to 32,000 times per second, outputting high-quality point cloud data to capture more environmental details5. Effectively resists interference from indoor ambient light and strong outdoor light; achieves stable ranging and high-precision mapping even under strong outdoor light conditions of 80,000 lux6. The radar’s top scanning area is approximately 18 mm high, making it compact and easy to embed. This significantly reduces the height of the robot’s radar aperture without affecting the robot’s overall aesthetic design, delivering a sleek, high-tech appearance7. The interface is consistent with that of the RPLIDAR A1 radar, ensuring compatibility with existing RPLIDAR A1 LiDAR robot products8. IP65 protection rating, combined with a sealed, independent housing, provides comprehensive protection for the internal rotating mechanism, mitigates external interference, ensures a stable operating environment, and meets the requirements of industrial applications9. To ensure the product’s safety for humans and pets, a low-power infrared laser emitter is used as the light source, driven by a modulated pulse method. The laser emits only for an extremely brief duration, complying with FDA Class 1 eye safety standardsSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 10cm * 6cm / 3.94inch * 3.94inch * 2.36inch Qty per Carton 90 Carton Weight 6.40kgs / 14.11lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 90 pcs = 39420 pcs40HQ: 1018 cartons * 90 pcs = 91620 pcs
£333.99 - £528.99
-
Waveshare Waveshare PS5268 2MP USB Camera Module 120dB High Dynamic Range, USB2.0 Port, Rolling Shutter, PS5268
1. This camera module is based on the original PixArt PS5268 sensor and utilizes a USB interface for signal transmission, demonstrating exceptional compatibility. Its convenient direct-connect host design makes applications simple and straightforward. The module maintains a stable 30FPS frame rate, ensuring smooth and uninterrupted video. With a high dynamic range of 120dB and excellent image quality, it clearly presents rich details in various lighting conditions, performing well whether in bright daylight or low-light nighttime environments. The PS5268-2MP-USB camera module also features a waterproof housing for enhanced environmental adaptability, making it suitable for applications requiring high-precision visual data, such as industrial inspection, robotic vision, and security monitoring, providing accurate and reliable visual support.2. Pixels: 2 million 3. Sensor chip: PS5268 4. Interface type: USB 2.0 5. Camera:--Sensor element: Size 1/2.4 inch --Aperture (F): 2.0--Focal length (EFL): 3.35 mm--Field of view (FOV): 112.6 degrees horizontal / 57.6 degrees vertical--Focus method: Fixed focus --Shutter method: Rolling shutter6. Image:--Supported format: MJPG --Static image resolution: 1920 x 1080 --Video recording support: MJPG 30FPS 1920 x 1080, 30FPS 1280 x 960, 30FPS 1280 x 720, 30FPS 960 x 720, 30FPS 720 x 480, 30FPS 640 x 480, 20FPS 320 x 240, 30FPS 320 x 1807. Operating voltage: 5V +/- 5%8. Operating current: 90 mA9. Module dimensions: 30.00 x 30.00 x 35.15 mmSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 18cm * 8cm * 8cm / 7.09inch * 3.15inch * 3.15inch Qty per Carton 40 Carton Weight 7.50kgs / 16.53lb Carton Size 38cm * 34cm * 42cm / 14.96inch * 13.39inch * 16.54inch Loading Container 20GP: 491 cartons * 40 pcs = 19640 pcs40HQ: 1140 cartons * 40 pcs = 45600 pcs
£89.99
-
WAVESHARE WAVESHARE Self-Balancing Controlled Bionic Hexapod Robot ESP32 Open Source
1. Supported movements: triangular gait, self-balancing2. Load capacity: 1kg3. Operating voltage: 12V4. No-load speed: 0.222sec / 60 degrees (45RPM)5. Stall torque: 30kg.cm6. Rated load: 10kg.cm7. Rated current: 900mA8. Control method: digital signal9. Control protocol type: half-duplex asynchronous serial communication10. Battery: 4000mAh (total capacity) 18650 lithium battery x 611. Charging method: DC 5.5x2.1 charging interface12. Battery life: 4.5h13. Charging time: 3h14. Onboard controller: ESP32-WROOM-3215. Onboard controller module features: Wi-Fi, BT, Dual Core, 240MHz16. Wireless control method: 2.4G Wi-Fi17. Wired control method: USB, UART18. Manual operation method: Web-based control interface19. Built-in high-precision 9-axis motion tracker ICM20948, capable of self-balancing20. No manual configuration of the compilation environment is required; a Wi-Fi hotspot is automatically established upon startup, allowing connection and login to the control page using a mobile phone or computer browser; no additional app download is required.21. Rich interfaces and peripherals: The device features a 0.91-inch OLED display, allowing for changes to the displayed content via a web application or host computer serial communication.22. Pre-drilled camera holes allow users to directly install cameras of the corresponding assembly size.23. Fully open source, supporting secondary development. HexArth series control code and communication interface documentation, based on our rich examples, allow for secondary development using various languages ??and devices.24. Can be installed as a Raspberry Pi 4B/Raspberry Pi 5 as a host computer for serial communication with the slave device; ESP32. As a lower-level machine, it can handle most of the computational power for inverse linkage solving and gait generation, leaving more resources for the Raspberry Pi to be used for high-level function development.25. Dimensions: 344.30 x 428.59 x 154.88 (mm)26. Weight: 2.1kg27. Servo dimensions: 45.20 x 24.70 x 37.30 (mm)28. Servo weight: 69gSpecification: Package Weight One Package Weight 2.20kgs / 4.86lb One Package Size 37cm * 45cm * 15cm / 14.57inch * 17.72inch * 5.91inch Qty per Carton 1 Carton Weight 3.30kgs / 7.28lb Carton Size 39cm * 47cm * 17cm / 15.35inch * 18.5inch * 6.69inch Loading Container 20GP: 855 cartons * 1 pcs = 855 pcs40HQ: 1986 cartons * 1 pcs = 1986 pcs
£445.99
-
WAVESHARE WAVESHARE USB4 V2.0 Type-C Extension Cable 80Gbps High-Definition Video Transmission, Straight Head, 90-Degree Bend Head
1. Short-distance extension maintains high-speed and high-power transmission, reducing the number of direct plugging and unplugging operations on the host interface, optimizing the daily user experience.2. 8K@60Hz High-Definition Video Transmission3. Compatible with DisplayPort protocol devices, easily connect to mobile phones, computers, and game consoles for smooth high-definition video transmission.4. 90-degree bendable for easy cable concealment.5. Strong and bend-resistant, durable, flexible TPE sheath, resistant to bending and breakage, can withstand high-intensity frequent plugging and unplugging.6. Length: 90mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 5cm * 4cm / 3.94inch * 1.97inch * 1.57inch Qty per Carton 224 Carton Weight 12.30kgs / 27.12lb Carton Size 42cm * 37cm * 34cm / 16.54inch * 14.57inch * 13.39inch Loading Container 20GP: 504 cartons * 224 pcs = 112896 pcs40HQ: 1171 cartons * 224 pcs = 262304 pcs
£3.99
-
Waveshare Waveshare ESP32-S3R8 1.46inch Round Touch Display Development Board, 412×412, Supports WiFi & Bluetooth, Without Cover Glass, With Cover Glass, With Widened Cover Glass
1. This product is a microcontroller development board supporting 2.4GHz Wi-Fi and Bluetooth BLE 5. Integrated with high-capacity Flash and PSRAM, it features an onboard 1.46-inch touch LCD screen for smooth operation of GUI interfaces like LVGL. Combined with multiple peripheral interfaces, it accelerates ESP32-S3 HMI application development. 2. Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, operating at up to 240MHz 3. Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antenna 4. Built-in 512 KB SRAM and 384 KB ROM, stacked with 8 MB PSRAM and 16 MB onboard Flash 5. Type-C interface enhances user convenience and device compatibility 6. Onboard 1.46-inch LCD screen with 412 × 412 resolution and 16.7M colors 7. Supports I2C interface for touch control with interrupt capability 8. Exposed UART, I2C, and partial IO interfaces 9. Onboard QMI8658 6-axis IMU (3-axis accelerometer + 3-axis gyroscope) for angle/acceleration detection 10. Onboard PCF85063 RTC chip enables uninterrupted power via external battery, maintaining RTC functionality during main battery replacement 11. Two customizable side buttons (PWR and BOOT) for user-defined functions 12. Onboard 3.7V MX1.25 lithium battery charge/discharge interface 13. Micro SD card slot for storage expansion and high-speed data transfer, facilitating data logging/media playback while streamlining circuit design 14. Flexible clock control and multi-power modes enable precise low-power operation across scenarios 15. Multiple exposed GPIO pins remappable to various functions for custom developmentSpecification: Package Weight One Package Weight 0.38kgs / 0.85lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 128 Carton Weight 49.70kgs / 109.57lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 128 pcs = 70272 pcs40HQ: 1275 cartons * 128 pcs = 163200 pcs
£21.99 - £29.99
-
WAVESHARE WAVESHARE GNSS L1+L2+L5 Multi-Satellite Multi-Frequency Four-Wire Helical Active Precision Positioning Antenna, Q25, Q39
1. Connector type: SMA Inner Pin2. Protection rating: IP673. Four-wire helical antenna for GNSS, featuring high gain and wide circular polarization coverage angle4. Receives more low-elevation satellite signals, improving positioning performance; suitable for smart home, smart agriculture, and high-precision map applications5. Four-wire helical structure with wide circular polarization coverage angle, enhancing low-elevation satellite signal reception capability6. High gain, low noise figure design, supports multi-frequency, multi-system GNSS signal reception7. Small size, lightweight, flexible installation, suitable for various devices and applications8. Uses SMA interface, supports RF transmission and coaxial DC bias feeding function9. Meets IP67 protection requirements, suitable for long-term stable operation in outdoor environmentsAntenna characteristics1. Frequency range:- GPS: L1/L2/L5- BDS: B1/B2a/B2b/B3i- GLONASS: G1/G2- Galileo: E1/E5a/E5b2. Antenna gain: Q25 2dB; Q39 2.5dBi3. Characteristic impedance: 50Ω4. Polarization: RHCP (Right-hand circular polarization)5. Coverage angle: 360 degrees6. Dimensions: Q25 58.70 x 27.70 mm; Q39 40.80 x 44.30 mmAmplifier characteristics1. Gain: Q25 37dB; Q39 28dB2. Noise figure: 1.5dB3. Operating voltage: Q25 3.3V ~ 16V DC; Q39 3.0V ~ 16V DC4. Operating current: Q25 13mA; Q39 15mASpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 12.70kgs / 28.00lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs
£15.99 - £18.99
-
WAVESHARE WAVESHARE SMA Antenna Suction Cup Magnetic Base 3-meter Coaxial Cable, Magnetic Base
1. Frequency range: 0GHz ~ 6GHz2. Mounting method: magnetic base fixation3. Impedance: 50 ohms4. Cable type: RG174 coaxial cable5. Input power: 50W6. Cable length: 3m7. Base interface: SMA female (external thread)8. Cable terminal interface: SMA male (internal thread)9. Base dimensions: 60.5 x 36 (mm)10. Cable length: 30cmSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 13cm * 10cm * 4cm / 5.12inch * 3.94inch * 1.57inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 41cm * 32cm * 34cm / 16.14inch * 12.6inch * 13.39inch Loading Container 20GP: 597 cartons * 72 pcs = 42984 pcs40HQ: 1387 cartons * 72 pcs = 99864 pcs
£2.99
-
WAVESHARE WAVESHARE 60GHz Millimeter-Wave Micro-Motion Sensing Radar Module, Without Base, With Base
1. Operating frequency: 60GHz2. Modulation method: PCR3. Power supply voltage: 5V4. I/O level: 3.3V5. Output interface: USB / UART / I2C6. Communication baud rate:- UART: 921.6kbps- I2C: 100K / 400K7. Detection distance resolution: 0.03m@25 Dgree Profile18. Detection angle: horizontal 53 degrees; vertical 65 degrees9. Detection accuracy: 0.03m@Profile110. Operating current: 5V 80mA11. Based on 60GHz pulse coherent radar (PCR) technology, it can realize human presence and motion detection and support high-precision distance measurement.12. With configurable detection area and sensitivity parameters, it has good anti-interference capability.13. Module integrates Arm Cortex-M4 MCU. (STM32L431CBT6) can be used as an independent operating unit to directly deploy user applications on Acconeer RSS, or it can communicate with an external host controller via register command protocol.14. Small size, low power consumption, and easy integration, suitable for applications such as human presence detection, proximity sensing, non-contact triggering, and vital sign monitoring.15. A121 60GHz pulse coherent radar (PCR), integrating RF, baseband, and AiP antenna, supporting human presence, micro-motion, and high-precision ranging.16. Integrated arm cortex-M4 MCU (STM32L431CBT6), 80MHz, 128KB Flash, and 64KB RAM, supporting local radar processing.17. Compact 39 × 39 (mm) size, optimized antenna structure, achieving high gain and stable detection. IO interface supports 3.3V.18. Supports UART, I2C, and GPIO interfaces, outputting radar detection results based on register protocol.19. Supports installation through plastic or glass partitions, enabling reliable operation without additional drilling.20. Provides PCB SWD test points for easy RSS and user application development, production line programming, and testing.21. Supports visual host computer integration; a single Type-C cable connects to host computer software for setup and debugging.Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 6cm * 6cm * 4cm / 2.36inch * 2.36inch * 1.57inch Qty per Carton 384 Carton Weight 20.30kgs / 44.75lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 384 pcs = 158208 pcs40HQ: 958 cartons * 384 pcs = 367872 pcs
£25.99 - £30.99
-
WAVESHARE WAVESHARE ESP32-C6 1.3-Inch LCD Display Development Board, Without Pin Header, With Soldered Pin Header
1. Display panel: IPS2. Display size: 1.3 inches3. Display resolution: 240 x 240 pixels4. Display colors: 262K5. Communication interface: SPI6. Driver IC: ST77897. The ESP32-C6 is designed for the AIoT market, featuring a high-performance RISC-V 32-bit processor and a low-power RISC-V 32-bit processor.8. Supports Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread). Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh.9. Supports ESP-IDF and Arduino, and comes with a complete SDK and open-source tutorials for easy learning and quick integration into applications.Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 7cm * 7cm * 4cm / 2.76inch * 2.76inch * 1.57inch Qty per Carton 280 Carton Weight 23.50kgs / 51.81lb Carton Size 51cm * 37cm * 34cm / 20.08inch * 14.57inch * 13.39inch Loading Container 20GP: 415 cartons * 280 pcs = 116200 pcs40HQ: 964 cartons * 280 pcs = 269920 pcs
£10.99
Sie haben 168 von 309 Produkten gesehen