Elektronikmodul
-
Waveshare AlphaBot2 Robot Building Kit For Raspberry Pi 3 Model B (No Pi), For Raspberry Pi 3 Model B (No Pi)
OverviewThis AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B (not included). It features rich common robot functions including line tracking, obstacle avoiding, Bluetooth/infrared/WiFi remote control, video monitoring, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, youre almost there, our open source demo codes is ready to help you get started fast.AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, its more efficient, more compact, and less heating4. 5Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Pi, the upper adapter board for controller:1. LM2596 voltage regulator, provides the Pi with stable 5V power2. TLC1543 AD acquisition chip, allows the Pi to use analog sensors3. PCA9685 servo controller, make it more smoothly to rotate the pan head4. CP2102 UART converter, easy for controlling the Pi via UARTSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 18cm * 6cm * 15cm / 7.09inch * 2.36inch * 5.91inch Qty per Carton 36 Carton Weight 1.80kgs / 3.97lb Carton Size 54cm * 36cm * 30cm / 21.26inch * 14.17inch * 11.81inch Loading Container 20GP: 457 cartons * 36 pcs = 16452 pcs40HQ: 1061 cartons * 36 pcs = 38196 pcs
£75.99
-
WAVESHARE Waveshare Isolated RS485 CAN HAT For Raspberry Pi
1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN3. 2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS4854. Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time5. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal6. Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption7. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic8. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance9. Onboard 120Ω terminal resistor, configured by jumper10. Onboard terminals and pin headers, more convenient connection11. Breakout SPI control pins, for connecting with host control boardsSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 41.00kgs / 90.39lb Carton Size 34cm * 32cm * 32cm / 13.39inch * 12.6inch * 12.6inch Loading Container 20GP: 765 cartons * 200 pcs = 153000 pcs40HQ: 1778 cartons * 200 pcs = 355600 pcs
£18.99
-
Waveshare Waveshare ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board Dual-core Processor, 23803
1. Support development environment, such as ESP-IDF, Arduino, MicroPython, etc.2. 240MHz Xtensa 32-bit LX7 dual-core processor3. Easy to integrate, 32-bit LX7, 2MB PSRAM, wireless network, dual-core processor4. Using ESP32-S3R2 chip, Xtensa 32-bit LX7 dual-core processor, running frequency 240mhz5. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB flash memory6. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with excellent RF performance7. Type-C connector, more convenient to use8. The onboard CH343 and CH334 chips can meet the needs of USB and UART development through the Type-C interface9. Onboard DC-DC chip MP28164, high-efficiency DC-DC step-down boost chip, the load current can reach 2A10. 27 x multi-function GPIO pins, configurable pin functions, allowing flexible development and integration11. Abundant external interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-16-bit camera interface), LCD interface (8-16-bit parallel RGB, 18080, MOTO6800), etc., Flexible realization of various functions12. Castellated modules allow direct soldering to the carrier board13. Support a variety of low-power working states, adjustable communication distance, data rate and power consumption balance, to meet the power consumption requirements of various application scenarios14. Support the ecosystem of Raspberry Pi Pico expansion board, suitable for artificial intelligence loT application development15. Support ESP-IDF, Arduino, MicroPython comprehensive SDK, development resources, tutorials, help you get started easily16. ESP32-S3 is specially designed for AloT applications, using Xtensa 32-bit LX7 dual-core processor with a frequency up to 240 MHz, powerful aluminum computing capability and reliable security features17. WIFI and BLE 5 support, ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 B/G/N) and 40mhz bandwidth to support its Bluetooth low energy subsystem to support Bluetooth 5 (LE) and Bluetooth Mesh18. ESP32-S3: Xtensa 32-bit LX7 dual-core processor19. 2.4G monopole ceramic antenna20. W25Q128JVSIQ: 16MB Flash21. Start button: press to enter download mode when reset22. CH334F: USB HUB controller23. CH343P: USB to UART chip24. MP28164: High-efficiency DC-DC step-down boost chip25. Support more Pico expansion modules: Eval-Board, 3.5-inch LCD, 1.3-inch OLED, 8-segment LED, e-paper, NB-IoT module, GPIO expander, sensor module, RTC module, UPS moduleSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 42cm * 42cm / 20.47inch * 16.54inch * 16.54inch Loading Container 20GP: 290 cartons * 500 pcs = 145000 pcs40HQ: 674 cartons * 500 pcs = 337000 pcs
£8.99
-
WAVESHARE Official Heatsink for Jetson Nano
Features1. Function of this aluminum heat sink is to cool down the board and make it operate safely 2. The aluminum heat sink can reduce the risk of hardware failure because of overheating 3. Essential for high-performance computing: Keeps module temperatures low to avoid overheating and throttling. 4. Safe for use: Spring mounting interface keeps excessive pressure off the Jetson Nano module. 5. Compatible with Jetson Nano Module, with elastic bracket and height-limited screws 6. Easy to install: Mounting holes & screws included.Package List1. NANO-HEATSINK x1 2. Elastic bracket and height-limited screws x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 45cm * 32cm * 32cm / 17.72inch * 12.6inch * 12.6inch Loading Container 20GP: 578 cartons * 200 pcs = 115600 pcs40HQ: 1343 cartons * 200 pcs = 268600 pcs
£5.99
-
WAVESHARE Waveshare Rail-Mount Serial Server RS485 to WIFI/Ethernet Module, Modbus MQTT Gateway, 21968
FeaturesThis is a RS485 device data acquisitor / IoT gateway designed for industrial environment. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to HTTPD Client, etc. With RS485, WIFI and Ethernet ports, the module can realize functions such as serial to WIFI, serial to Ethernet, Ethernet to WIFI and so on. Using screw terminals for power input, it supports 5~36V wide range power supply. Rail-mount V0 flame-retardant case design, small in size, easy to install. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring...SpecificationsOutline: 1. Communication interface: RS485, screw terminal 2. Power supply: 5 ~ 36V DC, screw terminal 3. Case: PC + ABS, V0 flame retardant grade 4. Dimensions: L x W x H: 109.66 x 28 x 64.71 mm Comunication: 1. Ethernet: 10 / 100M auto-negotiation RJ45 connector 2. WIFI: 802.11b/g/n compliant 3. Serial port: RS485 interface (Anti-surge, Lightningproof, Over-current protection) Wireless specification: 1. Frequency Band: 2.412 ~ 2.484 GHz 2. Wireless network: Station / AP / AP+Station Mode 3. Security mechanism: WPA-PSK / WPA2-PSK 4. Encryption type: TKIP / AES 5. Transmitting power: - 802.11b: +19dBm (11Mbps) - 802.11g: +18dBm (54Mbps) - 802.11n: +17dBm (HT20, MCS7); +17dBm (HT40, MCS7) 6. Receiving sensitivity: - 802.11b: -89dBm (11Mbps) - 802.11g: -81dBm (54Mbps) - 802.11n: -73dBm (HT20, MCS7); -71dBm (HT40, MCS7) Serial specification: 1. Baudrate: 300 ~ 460800 bps 2. Parity bit: None, odd, even, mark, space 3. Data bit: 5 ~ 9 bits 4. Flow control: N/A Software 1.Protocol: TCP / UDP / ARP / ICMP / DHCP / DNS / HTTP / MQTT 2. Configuration: Host, web browser, serial AT command 3. Communication method: TCP/IP direct communication, VCOM 4. Operating mode: Transparent transmission, serial command, HTTPD Client, Modbus TCP to Modbus RTU Environmental requirements 1. Working temperature: -40 ~ 85 degree C 2. Storage temperature: -45 ~ 125 degree C 3. Humidity range: 5% ~ 95% relative humidityPackage List1. RS485 TO WIFI/ETH x 1 2. Antenna x 1Specification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15cm * 8cm * 5cm / 5.91inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 17.00kgs / 37.48lb Carton Size 42cm * 50cm * 32cm / 16.54inch * 19.69inch * 12.6inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs40HQ: 921 cartons * 100 pcs = 92100 pcs
£31.99
-
WAVESHARE WAVESHARE Aluminum Heatsink for Raspberry Pi CM4, with Antenna Notch
Features1. Function of this aluminum heat sink is to cool down the board and make it operate safely 2. The aluminum heat sink can reduce the risk of hardware failure because of overheating 3. Essential for high-performance computing: Keeps module temperatures low to avoid overheating and throttling. 4. Easy to install: Mounting holes & screws included. 5. Matching with CM4 on size and mounting holes, fast heat dissipationPackage List1. CM4-HEATSINK-B x 1 2. Screws and thermal tapes x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 12.00kgs / 26.46lb Carton Size 45cm * 32cm * 32cm / 17.72inch * 12.6inch * 12.6inch Loading Container 20GP: 578 cartons * 200 pcs = 115600 pcs40HQ: 1343 cartons * 200 pcs = 268600 pcs
£2.99
-
WAVESHARE Waveshare Raspberry Pi Zero To 3B Adapter for Raspberry Pi 3 Model B/B+, Pi Zero To 3B
1. Zero can be easily attached via specially designed connectors 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. The same GPIO header height as 3B, easily connecting with 3B series HATs or development projects 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptiveSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 52cm * 32cm / 16.54inch * 20.47inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs40HQ: 885 cartons * 200 pcs = 177000 pcs
£13.99
-
WAVESHARE Waveshare OV9281-120 1MP Mono Camera Module for Raspberry Pi, Global Shutter, OV9281-120 Module
1. 1MP, global shutter, 120 degree FOV, OV9281-120 mono camera, compatible with Raspberry Pi series boards 2. The global shutter eliminates jello-effect while shooting fast moving objects, more suitable for high frame rate capturing 3. Working with Raspberry Pi, direct connect to Raspberry Pi different variants including 4B / 3B+ / 3A+ / 3B / 2B / B+ / A+, extra FPC cable is equired for Zero / Zero 2 W series Specifications: 1. Sensor: OV9281 2. CMOS size: 1/4 inch 3. Camera type: Mono 4. Pixels: 1MP (1280 x 800) 5. Shutter: Global Shutter 6. Aperture: F2.5 7. Distortion: Less than 7.5% 8. Field of vies: 120 degree 9. Focal length: 3.15mm 10. Focusing: Fixed focus Package List: 1. OV9281-120 Camera x 1 2. 15-pin FFC (opposite sides contact) x 1Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs40HQ: 1439 cartons * 200 pcs = 287800 pcs
£23.99
-
WAVESHARE Waveshare WAVEGO 12-DOF Bionic Dog-Like Robot, Basic Version, Basic Version
FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 465g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 300g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91 inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x4 16. 4PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs40HQ: 499 cartons * 20 pcs = 9980 pcs
£177.99
-
WAVESHARE Waveshare Nano Base Board B for Raspberry Pi CM4, Nano Base Board B
1. Suitable for evaluating the Raspberry Pi CM4 Or being integrated into end products 2. Standard CM4 socket, 40PIN GPIO, gigabit ethernet, USB2.0, DSI, CSI, 3.5mm Audio Jack... 3. All in the compact body just as the size of CM4 Specifications: 1. CM4 socket: Suitable for all variants of Compute Module 4 2. Networking: Gigabit Ethernet RJ45 connector 3. Connector: Raspberry Pi 40PIN GPIO header x 1 4. USB: USB 2.0 Type A connector x 1 5. Display: MIPI DSI port x 1 (15pin 1.0mm FPC connector) 6. Camera: MIPI CSI-2 port x 1 (15pin 1.0mm FPC connector) 7. Video: Mini HDMI port x 1, supports 4K 30fps output 8. Audio: 3.5mm jack 9. Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants 10. Power input: 5V 11. Dimension: 56 x 41mm Package list: 1. CM4-NANO-B x 1 3. 2*20PIN color-coded straight pinheader x 1Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 300 pcs = 186000 pcs40HQ: 1439 cartons * 300 pcs = 431700 pcs
£12.99
-
WAVESHARE Waveshare IMX378-190 Fisheye Lens 12.3MP Wider Field Camera for Raspberry Pi, IMX378-190 Module
1. Sensor: IMX378 2. CMOS size:1/2.3 inch 3. Camera type: Color Pixels: 12.3MP (4056 x 3040) 4. Shutter: Rolling Shutter 5. Aperture: F2.4 6. Distortion: Less than 58% 7. Field of vies: 190 degree 8. Focal length: 6.5mm 8. Focusing: Fixed focus distanceSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 12.30kgs / 27.12lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 300 pcs = 186000 pcs40HQ: 1439 cartons * 300 pcs = 431700 pcs
£39.99
-
WAVESHARE Waveshare Jetson Nano Development / Expansion Module Board Base A
1. GPU: 128-core Maxwell 2. CPU: Quad-core ARM A57 1.43 GHz 3. Memory: 4GB 64-bit LPDDR4 25.6 GB/s 4. Storage: 16GB eMMC (no micro SD card slot) 5. Video encoder: 4K 30, 4x 1080p 30, 9x 720p 30 (H.264/H.265) 6. Video decoder: 4K 60, 2x 4K 30, 8x 1080p 30, 18x 720p 30 (H.264/H.265) 7. Camera: 2x MIPI CSI-2 DPHY lanes 8. Connectivity: Gigabit Ethernet, M.2 Key E expansion connector 9. Display: HDMI and DP 10. USB: 4x USB 3.0, USB 2.0 Micro-B 11. Extension interfaces: GPIO, I2C, I2S, SPI, UART 12. Dimensions: 100 x 80 x 29mm 13. Other: 260-pin connectorSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 18.00kgs / 39.68lb Carton Size 52cm * 35cm * 35cm / 20.47inch * 13.78inch * 13.78inch Loading Container 20GP: 418 cartons * 200 pcs = 83600 pcs40HQ: 971 cartons * 200 pcs = 194200 pcs
£52.99
-
WAVESHARE Waveshare OV5640 FF 5MP USB Camera Module, Support 1080P Video Recording, FF
1. Pixels: 5MP 2. Sensor: OV5640 3. Interface: USB 2.0 4. Camera: Sensor size 1/4 inch 5. Aperture (F): 2.8 6. Focal length (EFL): 3.29 mm 7. Field of view (FOV): 68 degree 8. Distortion: Less than 1% 9. Focusing(C): FF Fixed-Focus 10. Image Format support: MJPG, YUV422 11. Static image resolution: 2592 x 1944 12. Video recording: 15 FPS 2592 x 1944, 30 FPS 1920 x 1080, 30 FPS 1280 x 720 13. Operating voltage: 5V +/- 5% 14. Camera size: 8.5 x 8.5 mm 15. Module size: 9 x 62 mmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 8.00kgs / 17.64lb Carton Size 45cm * 32cm * 32cm / 17.72inch * 12.6inch * 12.6inch Loading Container 20GP: 578 cartons * 200 pcs = 115600 pcs40HQ: 1343 cartons * 200 pcs = 268600 pcs
£22.99
-
WAVESHARE Waveshare OV5640 AF 5MP USB Camera Module, Support 1080P Video Recording, AF
1. Pixels: 5MP 2. Sensor: OV5640 3. Interface: USB 2.0 4. Camera: Sensor size 1/4 inch 5. Aperture (F): 2.8 6. Focal length (EFL): 3.29 mm 7. Field of view (FOV): 68 degree 8. Distortion: Less than 1% 9. Focusing(B): AF Auto-Focus; 10. Image Format support: MJPG, YUV422 11. Static image resolution: 2592 x 1944 12. Video recording: 15 FPS 2592 x 1944, 30 FPS 1920 x 1080, 30 FPS 1280 x 720 13. Operating voltage: 5V +/- 5% 14. Camera size: 8.5 x 8.5 mm 15. Module size: 9 x 62 mmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 8.00kgs / 17.64lb Carton Size 45cm * 32cm * 32cm / 17.72inch * 12.6inch * 12.6inch Loading Container 20GP: 578 cartons * 200 pcs = 115600 pcs40HQ: 1343 cartons * 200 pcs = 268600 pcs
£22.99
-
WAVESHARE Waveshare Type-C / USB-C to UART High Band Rate Transmission Module Connectors, USB-C
Features1. Adopt new version CH343G chip. Compared with CH340G, it supports higher data rate (up to 6Mbps) and more serial port IO levels (5V / 3.3V / 2.5V / 1.8V) 2. Support Mac, Linux, Android, Windows 7/8/8.1/10/11 3. Onboard resettable Fuse and Transient Voltage Suppressor, anti-overcurrent and anti-overvoltage, anti-surge, anti-static, improve shock resistance, stable and safe communication performance 4. Onboard IO protection circuits, anti-surge, anti-static, stable and safe communication performance 5. Onboard 3.3V and 5V TTL level switch pins for selecting TTL communication level 6. Support 3.3V/5V output (the module is powered by USB, and the onboard jumper should be shorted to 3.3V or 5V accordingly) 7. Adopt double-sided black immersion gold process, which is durable and has a good lookIndictor Description1. PWR: Power indicator, turn on when the voltage is detected from USB interface 2. RXD: Receiving indicator, turn on when data is sent back from the device interface 3. TXD: Sending indicator, turn on when data is sent from USBPinouts Definition1. VCC: 5V or 3.3V output for external device (configured by jumper) 2. GND: Ground 3. TXD: Connects to MCU.RXD 4. RXD: Connects to MCU.TXD 5. RTS: Connects to MCU.CTS 6. CTS: Connects to MCU.RTSSpecifications1. Host interface: USB 2. Device interface: UART 3. Communication range: 50bps ~ 6Mbps 4. USB device interface: USB Type-C 5. Protection: resettable Fuse, ESD protection 6. UART interface connector: 6-pin right-angle pinheader 7. Protection: IO protection diodeSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 400 Carton Weight 7.00kgs / 15.43lb Carton Size 52cm * 35cm * 35cm / 20.47inch * 13.78inch * 13.78inch Loading Container 20GP: 418 cartons * 400 pcs = 167200 pcs40HQ: 971 cartons * 400 pcs = 388400 pcs
£2.99
-
WAVESHARE Waveshare Industrial IoT Wireless Expansion Module for Raspberry Pi CM4
About The ProtuctThis is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G / 5G / LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC. Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.Specifications1. CM4 socket: For all variants of Compute Module 4 2. Networking: - Gigabit Ethernet RJ45 - M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module - Nano-SIM card slot, support standard Nano-SIM card for 5G/4G/3G/2G communication 3. USB: USB 2.0 x 3 4. PIN header: Non-isolated RS485 x 2, non-isolated CAN x 1, some GPIO pins 5. Camera: MIPI CSI-2 x 1 (15pin 1.0mm FPC connector) 6. Video: HDMI x 1, support 4K 30fps output 7. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 8. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 9. Fan header: 5V/12V, allows speed adjustment and measurement 10. Power input: 5V or 7~36V 11. Dimensions: 145 x 90 x 40mmPackage List1. CM4-IO-WIRELESS-BASE x 1 2. PCIe to 4G/LoRa adapter x 1 3. Screwdriver x 1 4. Screws pack x 1 5. 12V 2A power adapter x 1Specification: Package Weight One Package Weight 0.38kgs / 0.83lb One Package Size 16cm * 12cm * 5cm / 6.3inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 15.50kgs / 34.17lb Carton Size 50cm * 32cm * 27cm / 19.69inch * 12.6inch * 10.63inch Loading Container 20GP: 617 cartons * 40 pcs = 24680 pcs40HQ: 1432 cartons * 40 pcs = 57280 pcs
£87.99
-
WAVESHARE Waveshare PL2303 USB To UART (TTL) Communication Module V2
Features1. Adopt PL2303GS new version device 2. Support windows XP/7/8/10/11/... 3. 3x VCCIO power mode via jumper setting: - VCCIO - 5V: 5V output - VCCIO - 3.3V: 3.3V output 4. Open the jumper: powered from target board (1.8V/2.5V/3.3V/5V) 5. 3x LED indicators: TXD, RXD, PWRPackage List1. PL2303 USB UART Board (type A) V2 x1 2. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 500 pcs = 283000 pcs40HQ: 1314 cartons * 500 pcs = 657000 pcs
£2.99
-
WAVESHARE WAVESHARE 4-digit 8-segment Display Module for Raspberry Pi Pico, SPI-compatible, 19806
Features: 1. SPI-compatible, easy to drive 2. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series 3. Come with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications: 1. Operating voltage: 5V 2. DIGITS: 4 3. LED color: Red 4. Driver: 74HC595 5. Display part No.: FJ4401AH 6. Display size: 0.4 inch 7. Size: 52 x a??21mSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 33cm * 26cm / 16.54inch * 12.99inch * 10.24inch Loading Container 20GP: 740 cartons * 300 pcs = 222000 pcs40HQ: 1717 cartons * 300 pcs = 515100 pcs
£2.99
-
WAVESHARE Waveshare 16-Channel 12-bit I2C Servo Driver HAT for Raspberry Pi, 15275
About The ProductNeedless to say, the Raspberry Pi is powerful enough in most cases, yet it is not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver HAT for you. Features 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. I2C controlled, using only 2 pins 3. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales) 4. Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal 5. Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc. 6. Reserved I2C control pins, allows to work with other control boards 7. Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control) Specifications 1. Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal) 2. Servo voltage: 5V 3. Logic voltage: 3.3V 4. Driver: PCA9685 5. Control interface: I2C 6. Dimension: 65mm x 30mm 7. Mounting hole size: 3.0mm 8. Supported Servo This HAT can be used to drive servos such as: - SG90 Servo - MG90S Servo - MG996R ServoPackage List1. Servo Driver HAT x1 2. RPi screws pack (2pcs) x1 Note: Raspberry Pi and servos are NOT included.Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 22cm * 22cm / 12.6inch * 8.66inch * 8.66inch Loading Container 20GP: 1721 cartons * 200 pcs = 344200 pcs40HQ: 3996 cartons * 200 pcs = 799200 pcs
£11.99
-
WAVESHARE Waveshare 2.9 inch 296 x 128 Pixel 5-Points Capacitive Touch Black / White E-Paper E-Ink Display HAT for Raspberry Pi Pico, SPI Interface, 19967
Features1. 2.9inch capacitive touch ePaper module, 296??128 resolution 2. 5-points touch support, user-defined wakeup gesture 3. No backlight, keeps displaying last content for a long time even when power down 4. Ultra low power consumption, basically power is only required for refreshing 5. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards 6. Reversed control interface, for connecting with controller boards like Arduino/STM32, etc. 7. Comes with development resources and manual (examples for Raspberry Pi)Specification1. Operating voltage: 3.3V/5V 2. Display color: Black, white 3. Resolution: 296 x 128 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: 0.3s 8. Full refresh time: 2s 9. Dimensions: 89.10 x 42.70mm 10. Display size:66.89 x 29.05mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.227 x 0.226mmSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs40HQ: 2180 cartons * 200 pcs = 436000 pcs
£18.99
-
WAVESHARE Waveshare Multi Band 2G GSM / GPRS LBS A7670E LTE Cat-1 HAT for Raspberry Pi, for Europe, Southeast Asia, West Asia, Africa, China, South Kor, A7670E LTE Cat-1 HAT
FeaturesThe A7670E Cat-1 HAT is an LTE Cat-1 module, which supports wireless communication modes including LTE-TDD, LTE-FDD, GSM, GPRS and EDGE, with up to 10Mbps downlink rate and 5Mbps uplink rate. It supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070 series, and the AT commands is mostly compatible with SIM7600 series. It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, and so on. 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards 2. Support protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL 3. Support dial-up, telephone call, SMS 4. Support LBS base station positioning, it is able to get the approximate position info via mobile network 5. TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words 6. Onboard USB interface, for testing AT Commands, network communication, and so on 7. Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc. 8. Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Arduino/STM32 9. SIM card slot, supports 1.8V/3V SIM card 10. 2x LED indicators, easy to monitor the operating status 11. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper 12. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)SpecificationFrequency band 1. LTE Cat-1: LTE-FDD: B1, B3, B5, B7, B8, B20 2. 2G: GSM/GPRS/EDGE: 900/1800 MHz SMS and audio 1. SMS: Supported types: MT, MO, CB, Text, PDU 2. Storage: USIM card (CB could not be stored on SIM card) 3. Audio feature: Standard 3.5mm audio jack for audio input/output Others 1. Power supply: 5V 2. Operating voltage:5V / 3.3V (configured via jumper) 3. Operating temperature: -30 degree C ~ 80degree C 4. Storage temperature: -45 degree C ~ 90 degree C 5. Dimensions: 65 x 30.5mmPackage List1. A7670E Cat-1 HAT x 1 2. LTE Antenna x 1 3. USB-A to USB-C cable x 1 4. RPi screws pack x 1Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£23.99
-
WAVESHARE Waveshare Raspberry Pi PoE+ HAT Ethernet Expansion Board for Raspberry Pi 3B+/4B
Product Overview1. The Raspberry Pi PoE+ HAT is a Power Over Ethernet (PoE+) accessory for the Raspberry Pi 3B+/4B. Compared to its predecessor Raspberry Pi PoE HAT, it features better cooling effect, implementing the 802.3af/at standard with 5V DC/4A larger power output, providing enough power for both Raspberry Pi 3B+/4B at max load and other peripherals at the same time. 2. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.Specification1. PoE standard: 802.3af/at 2. Input voltage: 37-57 V DC, Class 4 device 3. Output voltage/current: 5V DC/4A 4. Current sense: Yes 5. Transformer design: Planar 6. Fan: Controllable brushless cooling fan, delivering 2.2 CFM for processor cooling 7. Fan size: 25 x 25mm 8. Feature: Fully isolated switched-mode power supply 9. Compatible with: Raspberry Pi 3B+/4BPackage List1. Raspberry Pi PoE+ HAT x1 2. Standoffs pack x1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£33.99
-
WAVESHARE Waveshare 5 inch Slimmed-down Version 800 x 480 Toughened Glass Panel Capacitive Touch Screen LCD (H), 5 inch
Device & System SupportRaspberry Pi 1. Support Raspbian, 5-points touch, driver free 2. Support Ubuntu / Kali / WIN10 IoT, single point touch, driver free 3. Support Retropie, driver free 4. Support all versions of Raspberry Pi PC Support Windows 10 / 8.1 / 8 / 7, 5-points touch, driverTouch Control1. Up to 5-points touch, depending on the operating system. 2. Up to 6H hardness toughened glass panel.Package List1. 5 inch HDMI LCD (H) V4 x1 2. HDMI cable x1 3. HDMI to Micro HDMI Adapter x1 4. USB type A plug to micro B plug cable x1 5. RPi screws pack (4pcs) x1Specification: Package Weight One Package Weight 0.29kgs / 0.64lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 100 Carton Weight 28.50kgs / 62.83lb Carton Size 52cm * 50cm * 32cm / 20.47inch * 19.69inch * 12.6inch Loading Container 20GP: 320 cartons * 100 pcs = 32000 pcs40HQ: 744 cartons * 100 pcs = 74400 pcs
£38.99
-
WAVESHARE Waveshare 7.5 inch 800x480 Pixel Red Black White E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, SPI Interface, 20129
Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. 2x user buttons and 1x reset button for easy interacting 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Advantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Specification1. Operating voltage: 3.3V 2. Display color: Red, black, white 3. Resolution: 800x480 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Outline dimensions: 170.2 x 111.2mm 10. Display size: 163.2 x 97.92mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.204 x 0.204 mmPackage List1. 7.5 inch e-Paper x1 2. Pico-ePaper-Driver-Board x1 3. Standoff pack x1Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£46.99
Sie haben 216 von 251 Produkten gesehen