Suchergebnisse für "drone lens protector"

Features: 1. High Toughness Customized Material. The gimbal bumper is made of lightweight material with high toughness and impact resistance. 2. The bumper can effectively relieve shock force and protect gimbal. 3. Add a strong defense for DJI Neo 2 gimbal. 4. One-Piece Design. Protects not just the gimbal, but the entire front fuselage assembly. 5. Integrated Grip Design. You can take it easily and start shooting instantly whenever you want. 6. Lightweight Design. The gimbal bumper weights only 5g, hardly affects flying endurance. Specifications: 1. Name: Sunnylife Quick-Release Gimbal Bumper 2. Applicable Models: For DJI Neo 2 3. Model: NE2-BX148 4. Material: Plastic???High Toughness Customized Materials??? 5. Product Size: 134 x 23 x 33mm 6. Net Weight: 5gSpecification: General Compatible with DJI: Neo 2 Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 16cm * 6cm * 4cm / 6.3inch * 2.36inch * 1.57inch Qty per Carton 200 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 62cm * 33cm / 16.54inch * 24.41inch * 12.99inch Loading Container 20GP: 310 cartons * 200 pcs = 62000 pcs40HQ: 720 cartons * 200 pcs = 144000 pcs

Lesen Sie Mehr Weniger

About The Product1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.Package List1. Tempered Glass Film x 2 2. Adhesive x 2 3. Lens Cloth x 2 4. Wet & Dry Wipes x 2Specification: General Compatible with DJI: Avata Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 14cm * 8cm * 1cm / 5.51inch * 3.15inch * 0.39inch Qty per Carton 200 Carton Weight 2.20kgs / 4.85lb Carton Size 42cm * 30cm * 22cm / 16.54inch * 11.81inch * 8.66inch Loading Container 20GP: 962 cartons * 200 pcs = 192400 pcs40HQ: 2233 cartons * 200 pcs = 446600 pcs

Lesen Sie Mehr Weniger

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.Specification: General Compatible with DJI: Mavic Air 2 Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 14cm * 8cm * 1cm / 5.51inch * 3.15inch * 0.39inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 30cm * 22cm / 16.54inch * 11.81inch * 8.66inch Loading Container 20GP: 962 cartons * 200 pcs = 192400 pcs40HQ: 2233 cartons * 200 pcs = 446600 pcs

Lesen Sie Mehr Weniger

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.Specification: General Compatible with DJI: Mavic Mini Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 14cm * 8cm * 1cm / 5.51inch * 3.15inch * 0.39inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 30cm * 22cm / 16.54inch * 11.81inch * 8.66inch Loading Container 20GP: 962 cartons * 200 pcs = 192400 pcs40HQ: 2233 cartons * 200 pcs = 446600 pcs

Lesen Sie Mehr Weniger

1. Für DJI AVATA 2 2. Der Stoßfänger besteht aus einer Aluminiumlegierung, die die Aufprallkraft beim Aufprall der Drohne wirksam lindern und Schäden am Kardangelenk verringern oder vermeiden kann 3. Genaue Positionierung, Verbesserung der Stabilität, Vergrößerung der krafttragenden Fläche, Widerstandsfähigkeit gegen hohen Druck, feste Befestigung ohne Lösen und Schutz des Kardangelenks vor Beschädigungen 4. Es hat keinen Einfluss auf die Verwendung der originalen kardanischen Schutzhülle, und die Installation des Stoßfängers hat keinen Einfluss auf Avata 2s autonomen Turtle Flip 5. Es kann nach einer Installation jederzeit verwendet werden, was bequem und schnell ist und wiederholte Demontage und Montage vermeidet 6. Nach der Installation des Stoßfängers, wenn der Kardanring versehentlich Äste, Wände oder andere Hindernisse berührt, spielt er eine schützende Rolle für den Kardanring 7. Das leichte Design stellt keine zusätzliche Belastung für den Flug des AVATA 2 dar und lässt sich leicht verstauen und mitnehmen 8. Material: Aluminiumlegierung 9. Produktgröße: 45 x 40 x 7 mm 10. Produktgewicht: 8,5 Gramm 11. Hinweis: Es wird nur Stoßstange + Montagewerkzeug geliefert, sonst nichts! Spezifikation: Allgemein Kompatibel mit DJI: Avatar 2 Paketgewicht Gewicht eines Pakets 0,03 kg / 0,06 lb Einheitspackungsgröße 19 cm * 13 cm * 1 cm / 7,48 Zoll * 5,12 Zoll * 0,39 Zoll Menge pro Karton 60 Kartongewicht 2,60 kg / 5,73 lb Kartongröße 21 cm * 28 cm * 32 cm / 8,27 Zoll * 11,02 Zoll * 12,6 Zoll Container laden 20GP: 1417 Kartons * 60 Stück = 85020 Stück 40HQ: 3290 Kartons * 60 Stück = 197400 Stück

Lesen Sie Mehr Weniger

1. Transluzentes Design, einfach den Schutzstatus des Gimbals zu beobachten 2. Fit die rumpf design, stabil und nicht lose 3. bieten multi-direktionale schutz für die linse zu verhindern kollidieren mit fremdkörpern und staub 4. Fix die kopf, schützen die linse vor kratzern zu allen zeiten während des transports, und verlängern die lebensdauer der maschine 5. Für DJI MINI 3 6. Hinweis: Das Produkt enthält nur die Objektivschutzabdeckung und keine anderen Teile der Drohne 7. Material: Kunststoff Spezifikation: Allgemein Kompatibel mit DJI: Mini 3 Paketgewicht Gewicht eines Pakets 0,03 kg / 0,06 lb Einheitspackungsgröße 8 cm * 8 cm * 6 cm / 3,15 Zoll * 3,15 Zoll * 2,36 Zoll Menge pro Karton 500 Kartongewicht 14,00 kg / 30,86 lb Kartongröße 30 cm * 50 cm * 46,7 cm / 11,81 Zoll * 19,69 Zoll * 18,39 Zoll Container laden 20GP: 380 Kartons * 500 Stück = 190000 Stück 40HQ: 883 Kartons * 500 Stück = 441500 Stück

Lesen Sie Mehr Weniger

1. A specialized anti-collision kit designed for the Neo 2 drone, combining propeller guards, raised landing legs, and lens protector to maximize flight safety and minimize crash damage.2. Full-Coverage Propeller Guards: Enclosed propeller shields fully isolate blades from collisions, effectively cushioning impacts while maintaining stable airflow for safer flights.3. Reinforced bumpers absorb collision force to protect both the drone’s propellers and nearby objects/persons from accidental scratches or damage.4. Unobstructed Flight Visibility: Low-profile guards stay invisible to the drone’s camera, ensuring your aerial shots remain clear and uninterrupted.5. Ultra-Lightweight Design: The entire kit adds only 29g to the drone, avoiding excess weight that could affect battery life or maneuverability.6. Raised Landing Legs (2.2cm Height): Extended legs elevate the drone’s body to prevent ground friction during takeoff/landing and protect the underside from scratches.7. Material: PlasticSpecification: General Compatible with DJI: Neo 2 Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 18cm * 10cm * 5cm / 7.09inch * 3.94inch * 1.97inch Qty per Carton 48 Carton Weight 5.90kgs / 13.01lb Carton Size 38cm * 42cm * 32cm / 14.96inch * 16.54inch * 12.6inch Loading Container 20GP: 522 cartons * 48 pcs = 25056 pcs40HQ: 1212 cartons * 48 pcs = 58176 pcs

Lesen Sie Mehr Weniger

Features1. Specifically designed bumper guard for DJI Avata 360 propeller protector, featuring a precision angle structure that perfectly conforms to the drone body. Whether shooting in panoramic mode or single-lens mode, the guard always stays below the camera field of view, ensuring it never appears in footage. At the same time, it provides effective cushioning and protection for the Avata 360 propeller guard. (Key selling points: "Invisible Protection" and "Full View Hidden, Zero Intrusion in Footage", allowing users to fly confidently in panoramic mode without affecting shooting performance.) 2. Made of high-density EVA foam, weighing only 40g per pair (subject to actual product specs). The lightweight design adds no noticeable burden to the drone, preserves flight time, and maintains precise control, delivering a truly "no-feel" protective experience. 3. Fortress-style full-coverage design offers excellent elastic cushioning performance. Upon impact with walls or branches, the bumper absorbs shock energy through deformation, like an airbag, effectively protecting the motor shaft and drone structure from internal damage. The soft yet durable material resists deformation and breakage, ensuring long service life and reduced maintenance costs. 4. Snap-on quick installation design requires no tools. Simply align and press to secure; to remove, release the buckle by hand. The entire process is tool-free and efficient. The EVA material prevents scratches during installation or removal, greatly improving portability and convenience for outdoor use and quick scenario switching. 5. High-visibility orange color enhances detection in complex environments such as grass, forests, or water surfaces, making it easier to locate the drone in case of accidental drops. The secure snap-fit structure ensures a tight attachment that wonot loosen or fall off during flight, enabling worry-free operation.Note1. The bumper guard remains invisible in panoramic mode and does not interfere with shooting or recording. 2. When installed, it is not compatible with STARTRC waterproof cases or integrated PU storage bags. 3. Installation of the bumper does not affect the use or removal of the gimbal protector.Specification: General Compatible with DJI: Avata 360 Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 23cm * 13cm * 4cm / 9.06inch * 5.12inch * 1.57inch Qty per Carton 100 Carton Weight 15.00kgs / 33.07lb Carton Size 63cm * 47cm * 42cm / 24.8inch * 18.5inch * 16.54inch Loading Container 20GP: 214 cartons * 100 pcs = 21400 pcs40HQ: 497 cartons * 100 pcs = 49700 pcs

Lesen Sie Mehr Weniger