Suchergebnisse für "USB Tester Accessories"

1. Module parameters:- Power supply voltage: DC4.5-6V (micro USB interface)- Working current: no more than 70mA- Discharge voltage: 1.00V-15.00V Resolution 0.01V- End voltage range: 0.5-11.0V- Support through current: no more than 3.000A resolution 0.001A- Voltage measurement error: less than 1% + 0.02V- Current measurement error: less than 1.2% +-0.002A- Battery capacity range: 9999Ah (1Ah = 1000mAh) 2.2. When the value is large, it is switched by decimal point shift. When it is less than 10Ah, it will be displayed as X.XXX, when it reaches more than 10Ah, it will be displayed as XX.XX, and so on.3. Circuit board size: 50mmX37mm4. Finished product size: 50mmX37mmX17mm (Length X Width X Height, including copper foot height)5. Weight of board and accessories: single board 28g (including copper pillar), two 5W ceramic resistors 9g, 50W resistor about 27g (including wire)6. Note: In order to improve the voltage measurement accuracy, this circuit is specially designed with DC bias. When the terminal is connected nothing, a small voltage will be displayed, which does not affect the actual measurement. 0V) will display 0. If you want to understand the principle, you can check the superposition theorem in electrical engineering.7. How to use:- The battery under test should be fully charged first.- Connect the positive pole of the battery under test to the input positive pole, and the negative pole to the negative pole of the input. Connect the load to the output positive pole and the output negative pole, and connect the tester micro USB with working power (not available for desktop or notebook USB power supply). The battery voltage is displayed at this time.- To start the test directly, just press the “OK” button, the tester can automatically formulate a suitable termination voltage according to the full charge voltage of the battery, and will flash the display 3 times to start the test. Need to manually set the termination voltage, just press the "+" or "-" button to modify in the battery voltage display state, the termination voltage is displayed at the beginning of P, the back represents the voltage value, the resolution is 0.1V, after setting, press "OK" "start testing.- After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, the display data stays above the capacity (Ah) and flashes quickly with the corresponding indicator light, the displayed capacity is the actual discharge capacity of the battery, press it "OK" can stop the flashing and let the data display stably. Press the "OK" button again to restore to the state of just powering up and replace the battery to test the next section ...8. Error code and meaning:- Err1: The battery voltage is higher than 15V- Err2: The battery voltage is lower than the set termination voltage- Err3: The battery cannot bear the load discharge current or the line internal resistance is too large- Err4: Current is too large (current exceeds 3.1A)- Err5: Improper use or wiring error has caused the device to burn down and cannot be used (current sampling or control switch MOS burned)9. Note: If the battery is reversed, when the load is turned on and the load current is large (about> 0.8A), the circuit switch tube may be damaged!10. Secondary calibration operation: Press and hold three buttons to power on the tester at the same time, enter the calibration mode, first display the number of calibration records, then enter the formal calibration sampling program to display 0u0A, then short-circuit the input positive and negative poles and press "OK "Button to complete displaying J10u, apply a standard DC voltage of 10.00V between the input positive and negative electrodes, press the" OK "button, and then display J2.0A, apply to the output negative electrode (inflow direction) and input negative electrode (outflow direction) After a constant DC current of 2.0A, press the "OK" button once to complete the calibration. The tester will pre-check the calibration data. If the calibration data is reliable, it will display 4 calibration numbers in turn and then exit. If the pre-audit believes that the data is not reliable, discard the data and exit.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 23.00kgs / 50.71lb Carton Size 50cm * 50cm * 46cm / 19.69inch * 19.69inch * 18.11inch Loading Container 20GP: 231 cartons * 500 pcs = 115500 pcs40HQ: 538 cartons * 500 pcs = 269000 pcs

Lesen Sie Mehr Weniger

1) Brand new and high quality. 2) LAN / Network Cable Tester and USB Cable Tester. 3) It can test cable as follow: USB(A/A), USB(A/B), BNC 10Base-T, 100Base-Tx,1000Base-Tx, Token Ring, AT&T258A, Coxial, EIA/TIA568A/568B and RJ11/RJ12 modular cable. 4) You can use connect cable if you want to test BNC, Coaxial, RCA modular cables, if you want to test cable installed far away either on patch panel or wall plate which can use the Remote terminator. 5) The LAN/USB cable tester tests RJ11/RJ12 cable please use the appropriate adapters and follow the above procedure, so you can use it very easy and correct. 6) Compact and light weight. 7) Power LED indicator. 8) Powered by: 9V Battery (Not include). 9) Mode : Auto Mode and Manual Mode. 10) Size: 13.3cm x 6.6cm x 2.9cmSpecification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 16.1cm * 11cm * 3.7cm / 6.34inch * 4.33inch * 1.46inch Qty per Carton 50 Carton Weight 10.00kgs / 22.05lb Carton Size 32cm * 30cm * 41cm / 12.6inch * 11.81inch * 16.14inch Loading Container 20GP: 677 cartons * 50 pcs = 33850 pcs40HQ: 1572 cartons * 50 pcs = 78600 pcs

Lesen Sie Mehr Weniger

1. Working voltage range: 5.0V-36V2. Balance port 1 string input voltage range: 0.8V-15V3. Balance port 2-8 series input voltage range: 0.8V-4.8V4. Support battery string number: 1-8S5. Voltage measurement accuracy: 0.005V @4.2V6. Cell balance accuracy: 0.005V7. Support USB charging: QC 2.0/3.0 BC1.2, 12/2A (MAX)8. Support smart battery: set charging and anti-power parameters, query battery information and usage9. Supported battery types:- LiHv (1-8S)/LiPo (1-8S)/LiFe (1-8S)- Lilon (1-8S)/NiMH/Cd (1-10S)10. Display type: 2.4 inches 320x240 260,000 colors IPS LCD11. Visible 260,000 color display under strong sunlight12. The exquisite and powerful BG-8S intelligent battery tester fully supports BattGO technology13. With BattGO technology, you can fully understand the detailed parameters of the battery just by connecting to XT60i14. Easy to read battery voltage, battery cycle, working parameters and set up quickly15. Automatically balance the battery voltage, advanced automatic balance algorithm, to ensure the balance of each cell, automatically enter the low power consumption mode after completion16. Powerful portable charging function, connect to your battery, BG-8S can be a power bank for your mobile devices17. Support Qualcomm QC 2.0/3.0, compatible with BC1.2 and for Apple devices18. Receiver signal test and protocol analysis, BG-8S uses a standard 3-pin plug to detect BEC output voltage19. BG-8S also supports multiple protocol analysis, including PWM, PPM&S.BUS, etc. Future firmware upgrades will support more protocol analysis20. Support XT60/XT60i, XH2.54 1-8s balanced leads, XH2.54 3-pin, JST ETC measuring voltage21. Support LiHv, LiPo, Lilon, LiFe, NiMh/Cd battery and BEC output measurement22. Support USB upgrade, multi-language selection23. BG-8S has a Micro USB port, which can be easily connected to a PC for firmware upgrades24. The XT60i is designed for BattGo25. BG-8S adopts the XT60i connector jointly developed by ISDT and Amass, supports BattGO technology, and is highly compatible with the original XT60 plug26. Dimensions: 80x55x19mm27. Weight: 59 gramsSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 11cm * 10cm * 5cm / 4.33inch * 3.94inch * 1.97inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs

Lesen Sie Mehr Weniger

1. 2.4-inch bright full-color screen, outdoor viewing more easily2. Multi-function tester, to deal with a variety of testing needs3. Dual fast charging output, Type-C+Type-A up to 65W fast charging output4. 600W powerful output, support 8S lithium battery charging and balance management5. Multi-angle rotary stop design, 0-85 degrees rotatable screen6. Customized voice broadcasting, boot screenParameters:1. Input voltage: 7-35V MAX 25A2. Battery type: LiPo LiHv LiFe Lion LTO 1-8S; NiMh 1-20S Pb 1-10S3. Charging power: 0.1-20A 600W4. Discharge power: Recycling/external mode: 0.1-20A 600W; Normal mode: 0.1-3A 20W5. Balance current: 1000mA 4.2V6. USB A+C output: 5-20V 65W PD QC PPS AFC SCP7. PWM measurement: 880us-2200us 20-400Hz8. PPM measurement: 880us-2200us x 8CH 20-50Hz9. SBUS measurement: 880us-2200us x 16CH 20-100Hz10. Voltage range: 1.0-5.0V 1-8S11. Internal resistance range: 1-99mR 1-8S12. ESC: 1-20A 1-35V MAX 600W13. PWM output: 500us-2500us 20-1000Hz14. PPM output: 880us-2200us x 8CH 50Hz15. SBUS output: 880us-2200us x 16CH 74Hz16. Adjustable power supply: 1-20A 1-35V mode: CC+CV17. LCD display: 2.4-inch IPS RGB 320 x 240 pixelsSpecification: Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 16cm * 11cm * 5cm / 6.3inch * 4.33inch * 1.97inch Qty per Carton 24 Carton Weight 8.70kgs / 19.18lb Carton Size 44cm * 22cm * 20cm / 17.32inch * 8.66inch * 7.87inch Loading Container 20GP: 1377 cartons * 24 pcs = 33048 pcs40HQ: 3197 cartons * 24 pcs = 76728 pcs

Lesen Sie Mehr Weniger