Suchergebnisse für "electronics components"

1. CM5 card slot: suitable for all versions of Compute Module 52. Networking:- Gigabit Ethernet RJ45 interface- Supports connection to LoRa communication module via M.2 B KEY adapter- Supports connection to 4G/5G communication module via M.2 B KEY3. USB:- USB 2.0 interface (Type-C) x 1- USB 2.0 interface (Type-A) x 2- USB 3.2 Gen1 interface (Type-A) x 14. Video:- HDMI interface x 1, supporting 4K output- MIPI interface x 2, supporting CSI/DSI communication5. M.2:- M.2 M KEY (PCIe Gen2/3 x 1, supporting 2230/2242 NVMe or AI module)- M.2 B KEY / Mini-PCIe (requires adapter connection), supporting connection to 5G/4G/Lora and other wireless modules6. Storage: Built-in Micro SD card slot (for versions without eMMC)7. Serial Interfaces: - 2 x RS485- 1 x CAN, supporting 1Mbps communication rate8. Input/Output: Outputs a small amount of GPIO (directly connected to the Compute Module 5 core)9. Fan interface: 5V, 4PIN JST-SH PWM fan connector10. Power input: 7V ~ 36V wide voltage (terminal), 5V 5A (Type-C)11. Size: 145 x 90 x 40 (mm)12. Suitable for IoT gateways, wireless routers, intelligent data collection and other IoT application scenarios13. Expandable 4G / 5G / LoRa, multiple interface resources14. Do not plug or unplug any device except USB and HDMI when powered on15. Type C can be used as a USB SLAVE interface for burning images or power supply16. Board has 3 USB interfaces, the maximum current output of 2 USB 2.0 interfaces is 2A, and 1 USB 3.0 interface can output 2A independently (1 single USB 3.2 Gen1 + 2 USB 2.0 interfaces)17. Supports 3 screens with separate display, adds MIPI DSI driver, regardless of whether the screen is connected, the system will default connect and the screen will display in split screen mode (related to the system version)18. Board has M.2 M KEY interface, supports NVMe hard drive protocol (or PCIE protocol AI module)19. Board has M.2 B KEY interface, supports connecting 4G/5G communication module or connecting LoRa module through adapter board20. 2 isolated RS485 + 1 isolated CAN interface21. Board has BOOT switch, can turn the BOOT switch to ON before power-on, connect to the computer via Type C to let the device enter the burning mode22. When using Type C for burning, do not connect other devices, otherwise insufficient power supply may cause the device to be undetectableSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 17cm * 11cm * 6cm / 6.69inch * 4.33inch * 2.36inch Qty per Carton 30 Carton Weight 4.10kgs / 9.04lb Carton Size 36cm * 35cm * 32cm / 14.17inch * 13.78inch * 12.6inch Loading Container 20GP: 661 cartons * 30 pcs = 19830 pcs40HQ: 1535 cartons * 30 pcs = 46050 pcs

Lesen Sie Mehr Weniger

OverviewSmart robot is always the favorite project of electronic enthusiasts, however, a robot will be "not that smart" if it is not AI-based.Welcome the JetBot, an actual smart robot powered by Jetson Nano. With the intelligent eye (front camera), facial recognition, object tracking, auto line following, and collision avoidance can be easily achieved. It also comes with ROS nodes code, which makes it easy to get started with the open source ROS (Robot Operating System), and to learn the system framework and concepts of ROS.Features1. Adopts 3x 18650 batteries (NOT included), high battery capacity, up to 12.6V voltage output, more powerful driving force.2. Integrates S-8254AA + AO4407A lithium battery protection circuit, provides protections for over-charge, over-discharge, over-current, and short circuit.3. Onboard APW7313 voltage regulator, provides stable 5V voltage for the Jetson Nano.4. Onboard TB6612FNG dual H-bridge motor driver.5. Onboard 0.91inch 128×32 pixels OLED, allows to display robot IP address, RAM, battery life, etc.6. Onboard ADS1115 AD acquisition chip for monitoring the battery in real time.7. Weight: 1029gWhat is on the JetBot Expansion Board1. S-8254AA: Lithium battery protector, provides protections for over-charge, over-discharge, over-current, and short circuit2. ADS1115: 16-bit AD acquisition chip, monitoring the battery in real time3. AO4407A: P-Channel MOSFET for protection circuit4. APW7313: 5V power regulator for powering the Jetson Nano5. PCA9685: PWM controller, I2C interface, for IO expansion6. TB6612FNG: dual H-bridge motor driver7. 0.91 inch OLED: SSD1306 driver chip, 128×32 pixels8. Battery charger input: charging the 3x 18650 batteries9. Power switch10. 18650 battery holder11. Motor connector (bottom side)12. Jetson Nano communication header: I2C interface and power supplyPacking List1. Jetson Nano Developer Kit x12. Micro SD Card 64GB ×13. Metal box x14. Camera holder x15.Acrylic piece x16. Jetbot expansion board x17. IMX219-160 Camera x18. Wireless-AC8265 x19. Motor 2PCS x110. Wheel 2PCS x111.Omni-direction wheel 2PCS x112. Power adapter EU head x113. 12.6V battery charger x114. Wireless gamepad x115. Screwdriver 2PCS x116. 6Pin 9cm cable x117. Screws pack x118. Spanner x119. Cooling fan x120. Micro SD card reader x1Specification: Package Weight One Package Weight 1.40kgs / 3.10lb One Package Size 28cm * 20cm * 15cm / 11.02inch * 7.87inch * 5.91inch Qty per Carton 10 Carton Weight 15.00kgs / 33.07lb Carton Size 52cm * 40cm * 60cm / 20.47inch * 15.75inch * 23.62inch Loading Container 20GP: 213 cartons * 10 pcs = 2130 pcs40HQ: 496 cartons * 10 pcs = 4960 pcs

Lesen Sie Mehr Weniger

OverviewEmitting a beam of infrared, and receive the reflected beamFeatures wide range voltage comparator LM393Adjustable sensitivitySignal output indicatorSpecificationsPower: 3.3V ~ 5VDimension: 39mm × 15.5mm (include the IR LED)Mounting holes size: 3mmDetection range: 2cm ~ 30cm (depending on the obstacles color, farthest for white)Detection angle: 35°Recommended environment: in door, to avoid the sunshine effectApplicationsRobot path trackingObstacle-avoiding carPipeline counterHow to UseIn the case of working with a MCU:VCC ? 3.3V ~ 5VGND ? GNDAOUT ? MCU.IO (analog output)DOUT ? MCU.IO (digital output)Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 8cm * 3cm * 2cm / 3.15inch * 1.18inch * 0.79inch Qty per Carton 1820 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 39cm * 40cm / 22.05inch * 15.35inch * 15.75inch Loading Container 20GP: 305 cartons * 1820 pcs = 555100 pcs40HQ: 708 cartons * 1820 pcs = 1288560 pcs

Lesen Sie Mehr Weniger

1. Equipped with the ESP32-C6 high-performance 32-bit RISC-V processor, with a main frequency of up to 160 MHz2. Supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, featuring excellent radio performance and an onboard antenna3. Built-in 512KB HP SRAM, 16KB LP SRAM and 320KB ROM, with an external 16MB Flash4. Utilizes the Type-C interface, enhancing user convenience and device compatibility5. Equipped with a 2.16-inch capacitive touch high-definition AMOLED screen, with a resolution of 480 x 480, 16.7M colors, capable of clearly displaying color images6. Built-in CO5300 driver chip and CST9220 capacitive touch chip, communicating via QSPI and I2C interfaces respectively, without occupying excessive interface pin resources7. Built-in QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), capable of detecting motion posture, step counting and other functions8. Built-in PCF85063 RTC chip, connected to the battery through AXP2101, achieving uninterrupted power supply9. Built-in two customizable side buttons, KEY and BOOT, facilitating the development of custom functions using the buttons10. Built-in 3.7V MX1.25 lithium battery charging and discharging interface11. Exports 1 I2C, 1 UART and 1 USB pad, available for external devices and debugging use12. The benefits of using AMOLED screen include efficient power management, support for multiple output voltages, charging and battery management functions, and optimization of battery life13. Using AMOLED screen, one can achieve higher contrast, wider viewing angle, richer colors and faster response, and the body is thin, with low power consumption and flexibility advantagesParameters1. Display panel: AMOLED2. Display resolution: 480 x 480 pixels3. Display brightness: 600cd/square meter4. Communication interface: QSPI5. Touch control: upported6. Display size: 2.16 inches7. Display color: 16.7M8. Contrast ratio: 100000:19. Driving IC: CO530010. Touch IC: CST9220Specification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 8cm * 8cm * 6cm / 3.15inch * 3.15inch * 2.36inch Qty per Carton 144 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 144 pcs = 59328 pcs40HQ: 958 cartons * 144 pcs = 137952 pcs

Lesen Sie Mehr Weniger

1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)3. Built-in 512KB SRAM and 384KB ROM, stacked with 4MB Flash and 2MB PSRAM or 8MB Flash and 8MB PSRAM4. Features a stamp-hole design and onboard ceramic antenna for easy integration into user-designed baseboards5. Supports flexible clock and individual module power settings for low-power modes in various scenarios6. Integrated USB serial port full-speed controller with 24 GPIOs for flexible peripheral configuration7. Features 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, and 2 x ADC peripherals8. Supports MicroPython, ESP-IDF, and Arduino9. Compact size, using a half-hole design for easy integration with other motherboards.10. Multiple low-power operating modes meet the power consumption requirements of Internet of Things (IoT), mobile devices, wearable electronic devices, smart home applications, etc.11. Press and hold the BOOT (GPIO0) button before connecting the Type-C cable each time firmware is downloaded.12. When powered by an external power source, input 3.7V~6V power at the half-hole marked with 5V.13. Dimensions: 18x23.5mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 14.30kgs / 31.53lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs40HQ: 1040 cartons * 264 pcs = 274560 pcs

Lesen Sie Mehr Weniger

About the product1. Replacement LCD screen + touch screen digitizer assembly for OPPO Reno ACE / Realme X2 Pro 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with OPPO: Reno Ace Realme: X2 Pro Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Lesen Sie Mehr Weniger

OverviewThis is an edge connector expansion board designed for micro:bit, breakout the I/O pins to 2.54mm pitch pinheaders for easy use.SpecificationsDimension: 82.05mm x 36.10mmThrough holes diameter: 2mmSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 2cm / 3.94inch * 1.97inch * 0.79inch Qty per Carton 960 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 960 pcs = 265920 pcs40HQ: 644 cartons * 960 pcs = 618240 pcs

Lesen Sie Mehr Weniger

Type:Voltage Regulator1. Package: Step-down module2. Power: Standard3. Size: 20*11*5 mm4. Input voltage: DC 4.5-24V5. Output voltage: integrated adjustable and fixed output, fixed output voltage on the back6. Adjustable range (0.8-17V), fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V)7. Output current: maximum 3A (please pay attention to heat dissipation at full load), the actual test input 12V output within 1.5A without special treatment heat dissipation.8. Conversion efficiency: up to 97.5% (6.5 to 5V 0.7A)9. Switching frequency: 500KHz10. Output ripple: 20mV (12V to 5V3A) 20M bandwidth11. Wiring method: welding12. Input method: welding13. Output method: welding / pin header14. Welding hole spacing: 2.54 mm15. Output over voltage protection: none16. Full load temperature rise: 40 ° C17. Quiescent current: 0.85 mA18. Load adjustment rate: ±1%19. Voltage regulation rate: ±0.5%20. Dynamic response speed: 5% 200uSSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 5cm * 2cm / 3.94inch * 1.97inch * 0.79inch Qty per Carton 510 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 510 pcs = 226440 pcs40HQ: 1031 cartons * 510 pcs = 525810 pcs

Lesen Sie Mehr Weniger

DD Soft LCD Screen Features 1. COP process 2. Original thickness 3. 1.1mm assembly 4. 1:1 windows 5. Original resolution Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. LCD display + touch screen digitizer assembly replacement part. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. 7. The IC touch soldering on the new screen can be disassembled from the original screen, which requires professional maintenance. Specification: General Compatible with Apple: iPhone 15 Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 17.5cm * 10cm * 2cm / 6.89inch * 3.94inch * 0.79inch Qty per Carton 120 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 120 pcs = 64320 pcs40HQ: 1244 cartons * 120 pcs = 149280 pcs

Lesen Sie Mehr Weniger

1. Copper core motor, strong wind, fast heat dissipation, safe and durable2. Low noise, long life, low energy consumption, large air volume, stable operation, fast start3. High-strength and high-toughness fan blade, one-time injection molding, long service life, not easy to deform and break; not only has strong wind power but also effectively reduces noise4. The metal shell is strong and durable, with the characteristics of anti-drop, corrosion resistance, oxidation resistance, high temperature resistance, etc.; it can be used in high temperature environment for a long time, with stable performance5. Scope of application: heat dissipation of mechanical equipment6. Applicable temperature: -10 to 60 degrees Celsius7. Noise: 44DB8. Frequency: 50/60HZ9. Voltage: 220V10. Lead length: 25cm11. Speed: 2600R/MIN12. Motor power: 25W13. Current: 0.14A14. Bearing: oily15. Blade diameter: 110MM16. Blade material: PVC plastic17. Outer frame material: black painted metal18. Product life: 60000 hours19. Wind pressure: 6.8MMH2020. Air volume: 2.58CFM21. Size: 120 x 120 x 38MM22. Weight: 350GSpecification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 14cm * 14cm * 5cm / 5.51inch * 5.51inch * 1.97inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 58cm * 58cm * 20cm / 22.83inch * 22.83inch * 7.87inch Loading Container 20GP: 396 cartons * 74 pcs = 29304 pcs40HQ: 920 cartons * 74 pcs = 68080 pcs

Lesen Sie Mehr Weniger

Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD display + touch screen digitizer assembly for Itel A48. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Itel: A48 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Lesen Sie Mehr Weniger

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for Asus ZenFone Max M1 ZB555KL X00PD 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Asus: Zenfone Max (M1) ZB555KL Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Lesen Sie Mehr Weniger