Suchergebnisse für "pet electronics"

Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs

Lesen Sie Mehr Weniger

1. 800 x 480 high resolution,Resistive touch control 2. Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) 3. Drivers provided (works with your own Raspbian/Ubuntu directly) 4. HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) 5. Backlight can be turned off to lower power consumption 6. High quality immersion gold surface platingSpecification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 15cm * 11cm * 2cm / 5.91inch * 4.33inch * 0.79inch Qty per Carton 80 Carton Weight 27.50kgs / 60.63lb Carton Size 35cm * 32cm * 32cm / 13.78inch * 12.6inch * 12.6inch Loading Container 20GP: 744 cartons * 80 pcs = 59520 pcs40HQ: 1727 cartons * 80 pcs = 138160 pcs

Lesen Sie Mehr Weniger

1. Bitte legen Sie vor der Verwendung zwei AA-Batterien ein (Batterien sind nicht im Lieferumfang enthalten). Öffnen Sie die Batterieabdeckung, indem Sie sie fest nach unten schieben, legen Sie dann zwei AA-Batterien ein und schließen Sie die Batterieabdeckung wieder. 2. komfortable tasten, aus silikon material, empfindlich auf betrieb, dauerhaft im einsatz für eine lange zeit 3. Unterstützt die Bluetooth-Sprachfernbedienung, bequemer zu bedienen 4. Es besteht aus hochwertigem ABS, ist verschleißfest und langlebig und vermittelt ein angenehmes Gefühl. 5. Kompatible Modelle: Geeignet für Fernseher der Sony KDL- und XR-Serie/ BRAVIA Android TV/ 2020 2021 2022 Modelle TV/4K Ultra HD TV Spezifikation: Paketgewicht Gewicht eines Pakets 0,09 kg / 0,20 lb Einheitspackungsgröße 19 cm * 8 cm * 4 cm / 7,48 Zoll * 3,15 Zoll * 1,57 Zoll Menge pro Karton 60 Kartongewicht 5,90 kg / 13,01 lb Kartongröße 38 cm * 50 cm * 22 cm / 14,96 Zoll * 19,69 Zoll * 8,66 Zoll Container laden 20GP: 637 Kartons * 60 Stück = 38220 Stück 40HQ: 1480 Kartons * 60 Stück = 88800 Stück

Lesen Sie Mehr Weniger

Features1. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal 2. Onboard photocoupler isolation, prevent interference from external high-voltage circuit connected to the relay 3. High quality relay, contact rating: 10A 250V AC or Less than or equal 10A 30V DC 4. ABS protection enclosure with rail-mount support, easy to install, safe to use 5. Breakout USB port and BOOT pin, make it easy to debug without disassembling the enclosure 6. PWR indicator, RGB LED, and passive buzzer outside the enclosure 7. Come with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operation voltage: 5V 2. Relay channel: 8CH 3. Communication protocol: USB 4. Contact form: 1NO 1NC 5. Communication interface: Micro USBPackage List1. ABS protection enclosure (top and bottom) x 1 2. Pico-Relay-B x 1 3. Screwdriver x 1 4. Screws pack x 1Specification: Package Weight One Package Weight 0.32kgs / 0.70lb One Package Size 16cm * 12cm * 5cm / 6.3inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 11.50kgs / 25.35lb Carton Size 50cm * 32cm * 27cm / 19.69inch * 12.6inch * 10.63inch Loading Container 20GP: 617 cartons * 40 pcs = 24680 pcs40HQ: 1432 cartons * 40 pcs = 57280 pcs

Lesen Sie Mehr Weniger

Über das Produkt 1. Hochwertiges Metallgehäuse sorgt für Stabilität und Haltbarkeit. 2. Es verfügt über eine Codesperrfunktion, eine Datenregenerierungsfunktion und eine intelligente Kopierfunktion mit einem Schlüssel. 3. Die praktische Schlüsselanhängergröße lässt sich an Ihrem Autoschlüssel befestigen und verhindert so unerwünschte Sperrigkeit. Es kann das IC-Modell der Originalfernbedienung kopieren, nämlich 2262/2260/PT2264 usw. 4. Hohe Geschwindigkeit und hohe Genauigkeit, der Code geht nicht leicht verloren. 5. Anwendungsbereich: Fahrzeug-Zentralverriegelungssysteme, Garagentore, elektronische Tore, Elektrogeräte, Auto-Schiebedächer usw. Spezifikation: Allgemein Stromspannung Gleichstrom 12 V Arbeitsfrequenz 433 MHz Modulationsmodus FRAGEN Anzahl der Schlüssel 4 Schlüssel Übertragungsrate 50-60 kHz Kodierungstypen Code lernen Funktionierender Chip EV 1527 Widerstand 330.000 Arbeitsbereich 20-50 m Betriebstemperatur -10-50 Grad Celsius Paketgewicht Gewicht eines Pakets 0,05 kg / 0,10 lb Einheitspackungsgröße 5,3 cm * 3 cm * 1 cm / 2,09 Zoll * 1,18 Zoll * 0,39 Zoll Menge pro Karton 300 Kartongewicht 10,00 kg / 22,05 lb Kartongröße 25 cm * 20 cm * 20 cm / 9,84 Zoll * 7,87 Zoll * 7,87 Zoll Container laden 20GP: 2666 Kartons * 300 Stück = 799800 Stück 40HQ: 6190 Kartons * 300 Stück = 1857000 Stück

Lesen Sie Mehr Weniger

1. USB: - USB 2.0 x 2 - USB 2.0 x 2 (via FFC connector) 2. GPIO: Raspberry Pi 40 PIN GPIO x 1 3. Header: M.2 slot x 1 4. HD media interface: HDMI x 2, 1x via FFC connector, support 4K 30fps output 5. DSI display: MIPI DSI x 1 (15pin 1.0mm FPC) 6. CSI camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC) 7. Power input: 5V 8. FAN: 5V / 12V (no fan control) 9. RJ45 Ethernet: Gigabit Ethernet 10. CM4 slot: Suitable for all variants of Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 12. Size: 85.0 x 56.0mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 12.60kgs / 27.78lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs

Lesen Sie Mehr Weniger

1. Measure the temperature and humidity, and an alarm will be issued if there is an abnormality2. Using flame retardant engineering shell material, smoke and oil proof3. Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)4. Speaker sound intensity: 85-105dB5. Protocol: IEEE 802.11b/g/n6. Power supply mode: USB charging / 2 CR123A (not included)7. Voltage: 5V8. Power: 5W9. Current: 1A10. Size: About 6.8 x 6.8 x 3cm11. Weight: About 72gSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 9cm * 10cm * 5cm / 3.54inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 47cm * 27cm / 20.47inch * 18.5inch * 10.63inch Loading Container 20GP: 404 cartons * 100 pcs = 40400 pcs40HQ: 938 cartons * 100 pcs = 93800 pcs

Lesen Sie Mehr Weniger

1. Equipped with the ESP32-C6 high-performance 32-bit RISC-V processor, with a main frequency of up to 160 MHz2. Supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, featuring excellent radio performance and an onboard antenna3. Built-in 512KB HP SRAM, 16KB LP SRAM and 320KB ROM, with an external 16MB Flash4. Utilizes the Type-C interface, enhancing user convenience and device compatibility5. Equipped with a 2.16-inch capacitive touch high-definition AMOLED screen, with a resolution of 480 x 480, 16.7M colors, capable of clearly displaying color images6. Built-in CO5300 driver chip and CST9220 capacitive touch chip, communicating via QSPI and I2C interfaces respectively, without occupying excessive interface pin resources7. Built-in QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), capable of detecting motion posture, step counting and other functions8. Built-in PCF85063 RTC chip, connected to the battery through AXP2101, achieving uninterrupted power supply9. Built-in two customizable side buttons, KEY and BOOT, facilitating the development of custom functions using the buttons10. Built-in 3.7V MX1.25 lithium battery charging and discharging interface11. Exports 1 I2C, 1 UART and 1 USB pad, available for external devices and debugging use12. The benefits of using AMOLED screen include efficient power management, support for multiple output voltages, charging and battery management functions, and optimization of battery life13. Using AMOLED screen, one can achieve higher contrast, wider viewing angle, richer colors and faster response, and the body is thin, with low power consumption and flexibility advantagesParameters1. Display panel: AMOLED2. Display resolution: 480 x 480 pixels3. Display brightness: 600cd/square meter4. Communication interface: QSPI5. Touch control: upported6. Display size: 2.16 inches7. Display color: 16.7M8. Contrast ratio: 100000:19. Driving IC: CO530010. Touch IC: CST9220Specification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 8cm * 8cm * 6cm / 3.15inch * 3.15inch * 2.36inch Qty per Carton 144 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 144 pcs = 59328 pcs40HQ: 958 cartons * 144 pcs = 137952 pcs

Lesen Sie Mehr Weniger

1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz2. Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna3. Built-in 512KB SRAM and 384KB ROM, stacked with 16MB Flash and 8MB PSRAM4. Onboard 4.3-inch LCD capacitive touchscreen, 800 × 480 resolution, 65K color5. Supports I2C interface control of capacitive touch, 5-point touch, and interrupt support6. Onboard ES8311 audio codec chip and ES7210 echo cancellation circuit7. Onboard voltage regulator chip, supporting a wide voltage supply of 7 ~ 36V8. Onboard RTC chip and battery holder, ensuring no data loss when the battery is installed9. Onboard resources include I2C interface, Micro SD card slot, MX1.25 2PIN battery interface, and digital isolated I/O.10. Inputs feature bidirectional opto-isolation, supporting both passive and active switch inputs; active inputs support positive and negative voltages.11. Outputs feature opto-isolation for enhanced drive capability; sink current up to 450mA (MAX).12. External LED indicators for easy monitoring of power and battery charging status.13. Supports flexible clock and individual module power settings for precise control, enabling low-power modes in various scenarios.14. Capacitive 5-point touch for intuitive, WYSIWYG operation and a seamless multi-touch UI.15. Touch functionality via I2C signal, supporting 5-point touch.16. IPS display panel for superior display performance and a 160-degree viewing angle.17. Supports expansion with various peripherals; connects to more devices via I2C and isolated I/O interfaces.18. HMI human-machine interface (HMI): The HMI (also known as the user interface or user interface) is the medium for interaction and information exchange between the system and the user. It converts information from its internal form to a form acceptable to humans.19. Smart home control terminal: this terminal can serve as a central control screen for the home, enabling management of devices such as lights, curtains, and air conditioners via touch and AI voice control. It also displays real-time temperature, humidity, security status, and energy consumption information.Specification: Package Weight One Package Weight 0.60kgs / 1.33lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 54 Carton Weight 33.50kgs / 73.85lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 54 pcs = 31914 pcs40HQ: 1373 cartons * 54 pcs = 74142 pcs

Lesen Sie Mehr Weniger

1. The 6-way radio charger can supply power for six batteries or six radios at the same time 2. Ability to control the charging process to ensure high efficiency 3. Safe and reliable, with multiple safety protections 4. The adapter plug is removable, AC 100V-240V power supply for international use 5. Scope of application: suitable for large groups and labor-intensive activities (such as warehouses, property management, restaurants, supermarkets and enterprises) 6. Each slot is removable, if there is artificial damage during use, you can purchase it separately and replace it yourself 7. Compatible radio: suitable for Retevis RT29, suitable for Ailunce HD1 8. Input: 12V/2.5A 9. Output: 8.4V 10. Charging current: 350mA 11. Dimensions: 324 x 249 x 90mm 12. Weight: 1245g 13. Adapter cable length: 150cmSpecification: Package Weight One Package Weight 1.78kgs / 3.92lb One Package Size 39cm * 26cm * 10cm / 15.35inch * 10.24inch * 3.94inch Qty per Carton 4 Carton Weight 8.44kgs / 18.61lb Carton Size 39cm * 26cm * 40cm / 15.35inch * 10.24inch * 15.75inch Loading Container 20GP: 657 cartons * 4 pcs = 2628 pcs40HQ: 1526 cartons * 4 pcs = 6104 pcs

Lesen Sie Mehr Weniger

1. Frequenzbereich: 286-868 MHz 2. Drahtlose Übertragungsreichweite: 50-100 m 3. Betriebsspannung: DC3V (eine eingebaute 2032-Batterie) 4. Betriebsstrom: 10 mA bei 3 V. 5. Strahlungsleistung: 10mW@3V 6. Encodertyp: Festcode, Lerncode, teilweiser Rolling Code 7. Wird hauptsächlich zur Fernsteuerung einiger Autos verwendet. Ferngesteuerte elektrische Schiebetüren, Aufzüge, ferngesteuerte Schranken, ferngesteuerte Rolltore, Garagentore, Schiebetüren, ferngesteuerte LED-Leuchten, ferngesteuerte Feuerwerkszünder, ferngesteuerte Pkw-Türen, Diebstahlalarme, elektrische Türalarme, MP3-Motorrad-Diebstahlalarme usw. 8. Kopierbare Chips: 2260 (alle Hersteller), 2262 (alle Hersteller), PT2264 (alle Hersteller), 5326 (alle Hersteller), 527 (alle Hersteller), 1527 (alle Hersteller), 2240 (alle Hersteller), HT6026, HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT6P20D, 12L-4SC, PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211 9. Größe: 62x37x14mm 10. Gewicht: ca. 21g Spezifikation: Paketgewicht Gewicht eines Pakets 0,04 kg / 0,09 lb Einheitspackungsgröße 8 cm * 5 cm * 3 cm / 3,15 Zoll * 1,97 Zoll * 1,18 Zoll Menge pro Karton 320 Kartongewicht 12,70 kg / 28,00 lb Kartongröße 32 cm * 40 cm * 30 cm / 12,6 Zoll * 15,75 Zoll * 11,81 Zoll Container laden 20GP: 694 Kartons * 320 Stück = 222080 Stück 40HQ: 1612 Kartons * 320 Stück = 515840 Stück

Lesen Sie Mehr Weniger

1. Material: LED+PP 2. Flame effect: warm white light flashes 3. Product size: D 2.0cm x H 16.5cm 4. Battery: powered by 2 x AA battery (not included) 5. Battery life: about 150 hours 6. Uses: festival parties, creating atmosphere, bar, home 7. Net weight: 12 pieces / box, 0.28kg / set 8. Packing details: kraft paper box 9. Advantages: 1) Smokeless, flameless, avoiding the occurrence of flames. 2) The lighting time is long, equivalent to 10-20 times the ignition time of ordinary candles. 3) Beautiful and generous, suitable for all kinds of candle holders. 4) Simulation candle design, candle light with flashing.Specification: Package Weight One Package Weight 0.27kgs / 0.60lb One Package Size 17cm * 14cm * 5cm / 6.69inch * 5.51inch * 1.97inch Qty per Carton 106 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 106 pcs = 18762 pcs40HQ: 412 cartons * 106 pcs = 43672 pcs

Lesen Sie Mehr Weniger