Suchergebnisse für "arduino sensors"

Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 23.30kgs / 51.37lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs40HQ: 1197 cartons * 48 pcs = 57456 pcs

Lesen Sie Mehr Weniger

1. Based on the RP2350 main control chip, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. 12 programmable I/O (PIO) state machines for custom peripheral support.4. Built-in 520KB SRAM and 16MB on-chip Flash, using a Type-C interface for easy connection.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage, requiring no additional power supply at the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easily monitoring the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easily monitoring the devices operating status.14. DIN rail mountable ABS protective casing for easy installation and enhanced safety.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Can be recognized as a mass storage device via USB for drag-and-drop program downloading. 18. Provides 34 multi-functional GPIO pins19. Pins include 1 HSTX, 2 I2C, 2 UART, 8 12-bit ADC, and 24 controllable PWM channelsProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled by jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power dupply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs

Lesen Sie Mehr Weniger

Temperature-Humidity Sensor, DHT11 OnboardOverviewThis is a calibrated digital temperature and humidity module with onboard sensor DHT11. It can be used for detecting ambient temperature and humidity, through the standard single-wire interface.Specifications1. Temperature- Resolution : 1 degree C- Accuracy : +/-2 degree C- Measuring range : 0 degree C ~ 50 degree C2. Humidity- Resolution : 1%RH- Accuracy : +/-5%RH (0~50 degree C)- Measuring range : 20%RH ~ 90%RH (25 degree C)3. Operating voltage : 3.3V ~ 5.5 V4. Recommended storage condition- Temperature : 10 degree C ~40 degree C- Humidity : 60%RH or belowApplications1. Weather station2. Humidity controller3. Test & detection deviceHow to UseIn the case of working with a MCU:1. VCC: 3.3V ~ 5.5V2. GND: GND3. DOUT: MCU.IOPackage Contents1. DHT11 Temperature-Humidity Sensor x12. 3-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 4cm * 3cm * 1cm / 1.57inch * 1.18inch * 0.39inch Qty per Carton 7800 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 7800 pcs = 2215200 pcs40HQ: 661 cartons * 7800 pcs = 5155800 pcs

Lesen Sie Mehr Weniger

Features1.Pixels: 5 megapixel2.Resolution: 2592x19443.Sensor: OV5640 3.1 1.4um x 1.4um pixel with OmniBSI technology, high sensitivity, low crosstalk, low noise 3.2 Automatic image control functions: AEC, AWB, ABF, ABLC, etc. 3.3 Image quality controls: color saturation, hue, gamma, sharpness, lens correction, etc. 3.4 Supports image scaling, panning, windowing, etc.4.Lens: 4.1 CCD size: 1/4inch 4.2 Aperture (F): 2.8 4.3 Focal Length: 2.8mm 4.4 Diagonal: 63 degree5.Output Formats: 5.1 YUV(422/420)/YCbCr422 5.2 RGB565/555/444 5.3 CCIR656 5.4 RAW RGB 5.5 Compressed Data6.Operating Voltage: 3.3V7.Control Interface: SCCB (I2C compatible)8.Data Interface: DVP 8-bit9.Dimension: 35.70mm × 23.90mmSpecification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 4cm * 1cm / 2.36inch * 1.57inch * 0.39inch Qty per Carton 4000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4000 pcs = 1108000 pcs40HQ: 644 cartons * 4000 pcs = 2576000 pcs

Lesen Sie Mehr Weniger

1. This camera module is based on the original PixArt PS5268 sensor and utilizes a USB interface for signal transmission, demonstrating exceptional compatibility. Its convenient direct-connect host design makes applications simple and straightforward. The module maintains a stable 30FPS frame rate, ensuring smooth and uninterrupted video. With a high dynamic range of 120dB and excellent image quality, it clearly presents rich details in various lighting conditions, performing well whether in bright daylight or low-light nighttime environments. The PS5268-2MP-USB camera module also features a waterproof housing for enhanced environmental adaptability, making it suitable for applications requiring high-precision visual data, such as industrial inspection, robotic vision, and security monitoring, providing accurate and reliable visual support.2. Pixels: 2 million 3. Sensor chip: PS5268 4. Interface type: USB 2.0 5. Camera:--Sensor element: Size 1/2.4 inch --Aperture (F): 2.0--Focal length (EFL): 3.35 mm--Field of view (FOV): 112.6 degrees horizontal / 57.6 degrees vertical--Focus method: Fixed focus --Shutter method: Rolling shutter6. Image:--Supported format: MJPG --Static image resolution: 1920 x 1080 --Video recording support: MJPG 30FPS 1920 x 1080, 30FPS 1280 x 960, 30FPS 1280 x 720, 30FPS 960 x 720, 30FPS 720 x 480, 30FPS 640 x 480, 20FPS 320 x 240, 30FPS 320 x 1807. Operating voltage: 5V +/- 5%8. Operating current: 90 mA9. Module dimensions: 30.00 x 30.00 x 35.15 mmSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 18cm * 8cm * 8cm / 7.09inch * 3.15inch * 3.15inch Qty per Carton 40 Carton Weight 7.50kgs / 16.53lb Carton Size 38cm * 34cm * 42cm / 14.96inch * 13.39inch * 16.54inch Loading Container 20GP: 491 cartons * 40 pcs = 19640 pcs40HQ: 1140 cartons * 40 pcs = 45600 pcs

Lesen Sie Mehr Weniger

Features1. Resistive touch screen TFT LCD, 2.8inch, 320x240 resolution2. Standard Arduino interface, compatible with development boards like : Arduino UNO, 3. Leonardo, UNO PLUS, NUCLEO, XNUCLEO4. Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control5. Micro SD slot, provides an easy way to store photos for displaying6. Controlled via SPI, only a few Arduino pins are used7. Backlight adjustable by program, lower power consumptionKey Parameters1. LCD Type: TFT2. LCD Interface: SPI4. LCD Controller: HX8347D5. Touch Screen Type: Resistive6. Touch Screen Controller: XPT20467. Colors: RGB, 65K colors8. Resolution: 320x240 (Pixel)9. I/O Voltage: 3.3V/5VWiki : www.waveshare.com/wiki/2.8inch_TFT_Touch_ShieldSpecification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 8cm * 6cm * 2cm / 3.15inch * 2.36inch * 0.79inch Qty per Carton 840 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 36cm * 40cm / 22.05inch * 14.17inch * 15.75inch Loading Container 20GP: 330 cartons * 840 pcs = 277200 pcs40HQ: 767 cartons * 840 pcs = 644280 pcs

Lesen Sie Mehr Weniger

Product manual：1. Through-beam photoelectric switch (IRSW20B) is a customizable USB button.It is equivalent to a standard HID USB keyboard and mouse. The switch function can be customized to any key,combination, mouse or character string through the supporting software settings. After the definition is completed, no software is required during use.2. Products are widely used in printers, copiers, game consoles, factory inspections, instrument control, equipment, etc. as well as mobile monitoring, proximity switch monitoring and occasions where it is not convenient to use mechanical switches to improve efficiency.3. The switch adopts a through-beam photoelectric trigger mode. The infrared emitting tube in the device emits infrared light. If there is an object in the middle of the groove, the receiving sensor will trigger the corresponding key value if the infrared light is not detected.4. Provides button definition setting software based on Windows system. After setting, you can use it in the following systems: Dos, Win 2000, Win XP, Win vista, Win 7, Win 8, Win10, Linux, Mac, Android.5. Scope of application: office, game, industry, disabled personFunction Description：1. Keyboard function: It can be set to any key value or key combination, for example, to key value A or CTRL+A.2. Mouse function: It can be set to the left, middle, right, forward and backward keys of the mouse, the movement of the X and Y axes, and the up and down scrolling functions of the wheel.3. String printing: You can set up to 38 characters, for example, set "hello!".4. Multimedia function: It can be set as previous song, next song, volume up, volume down and other multimedia control functions.5. Gamepad function: It can be set as up, down, left and right four direction keys and 6 function keys.When you want to change the function of the button, you can use the FootSwitch software to modify the button function:1. Insert the device into the computer USB port2. Run the software FootSwitch3. Click to select the corresponding setting window4. Click or enter the function you want to set5. Click Save to confirm.6. The setting software only supports Windows system. The FootSwitch software is often upgraded. Please follow the latest version.Product specifications:1. Product model: IRSW20B2. Interface type: USB3. Power supply: 5V30mA4. USB cable length: 2 meters (the cable length can be customized)5. Product weight: about 65 gramsOutline dimension drawing and installation hole position drawing as show picturesSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 100 Carton Weight 7.00kgs / 15.43lb Carton Size 30cm * 30cm * 28cm / 11.81inch * 11.81inch * 11.02inch Loading Container 20GP: 1058 cartons * 100 pcs = 105800 pcs40HQ: 2456 cartons * 100 pcs = 245600 pcs

Lesen Sie Mehr Weniger

1. Support setting of device address (1 - 255) to enable cascading of multiple devices via RS485 bus2. Onboard voltage stabilizing chip, supporting a wide voltage range of 7V - 36V3. Onboard integrated power isolation, providing stable isolated voltage. The isolated terminals do not require additional power supply4. Onboard optocoupler isolation, capable of signal isolation, with high reliability and strong anti-interference5. Onboard self-recovery fuse and TVS (Transient Voltage Suppression Diode), effectively suppressing surge voltages and transient peak voltages in the circuit, preventing overcurrent, overvoltage, lightning and static electricity6. Onboard 0.002 ohm 1% sampling resistor, 16-bit high-precision acquisition, capable of measuring bidirectional current7. The maximum measurement voltage is supported up to 36V, the maximum measurement current is supported up to 8A, and direct measurement of power is supported8. Rail-mounted enclosure design, supporting stacking combination, easy installation, and safer to use9. Three external LED indicators, facilitating viewing of MCU status and signal transmission/reception statusParameters1. Communication interface: RS4852. Communication baud rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560003. Default communication format: 9600, N, 8, 14. Modbus protocol: standard Modbus RTU protocol5. Power supply voltage: DC 7V - 36V6. Sampling resistance: 0.002 ohm, 1%7. Measurement range: voltage: 0 - 36V, current: ±8A8. Resolution: 0.8mAPackaging list: - Modbus RTU DC Monitor x 1- Power adapter x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 16cm * 11cm * 6cm / 6.3inch * 4.33inch * 2.36inch Qty per Carton 48 Carton Weight 9.00kgs / 19.84lb Carton Size 46cm * 38cm * 34cm / 18.11inch * 14.96inch * 13.39inch Loading Container 20GP: 448 cartons * 48 pcs = 21504 pcs40HQ: 1041 cartons * 48 pcs = 49968 pcs

Lesen Sie Mehr Weniger

OverviewThe RS485 CAN Shield will easily enable RS485/CAN communication functions for your NUCLEO/XNUCLEO Arduino boards.Features1. Arduino standard interfaces, compatible with Arduino boards like Arduino UNO, Leonardo, NUCLEO, XNUCLEO- When using with Arduino UNO, Leonardo, the CAN function is unavailable due to hardware limitation2. RS485 function, onboard transceiver SP3485/MAX3485, 3.3V power supply3. CAN function, onboard transceiver SN65HVD230, 3.3V power supplySpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 6cm * 2cm / 2.76inch * 2.36inch * 0.79inch Qty per Carton 960 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 36cm * 40cm / 22.05inch * 14.17inch * 15.75inch Loading Container 20GP: 330 cartons * 960 pcs = 316800 pcs40HQ: 767 cartons * 960 pcs = 736320 pcs

Lesen Sie Mehr Weniger

1.Measure the light sensitivity 2.Battery: CR123A x 1 Standby time:2 years 3.Sensitivity distance:7m 4.Wifi distance:45m 5.Free app:Tuyasmart or Smart Life. 6.Support systems: Android and IOS.Specification: Package Weight One Package Weight 0.60kgs / 1.32lb One Package Size 4.5cm * 4.5cm * 4.8cm / 1.77inch * 1.77inch * 1.89inch Qty per Carton 10 Carton Weight 6.50kgs / 14.33lb Carton Size 30cm * 22cm * 22cm / 11.81inch * 8.66inch * 8.66inch Loading Container 20GP: 1836 cartons * 10 pcs = 18360 pcs40HQ: 4263 cartons * 10 pcs = 42630 pcs

Lesen Sie Mehr Weniger

Overview1. Onboard audio power amplifier LM3862. Audio signal gain up to 2003. Adjustable accuracy4. Signal output indicatorSpecifications1. Mic sensitivity: 52dB2. Frequency range: 50Hz ~ 20KHz3. Power: 3.3V ~ 5.3V4. Mounting holes size: 2.0mmApplications1. Audio amplifier2. Ambient sound detection3. Sound level detection (unable to get exact dB value)How to UseIn the case of working with a MCU:1. VCC: 3.3V ~ 5.3V2. GND: Power supply ground3. AOUT: MCU.IO (analog output)4. DOUT: MCU.IO (digital output)Package Contents1. Sound Sensor x12. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.03lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs

Lesen Sie Mehr Weniger

1. Handheld design and non-slip pen type handle for easy operation.2. Built-in automatic temperature compensation(ATC) to get precise results.3. Measuring Rang: 0.00ppt-9.99ppt 10.0ppt-50ppt, very easy to test.4. With temperature units in C / F(switchable) and switchable backlight for convenient use in dark.5. With a replaceable sensor probe, the electrode probe can be replaced with an insert type design for convenient and fast replacement.6. Suitable for water source monitoring, aquaculture, environmental protection, printing and dyeing, electroplating, beverage industry and scientific research unit to determine the water quality salinity.7. Power supply: LR44 battery x 4pcs(not included).Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 25cm * 10cm * 5cm / 9.84inch * 3.94inch * 1.97inch Qty per Carton 20 Carton Weight 3.90kgs / 8.60lb Carton Size 42cm * 27cm * 27cm / 16.54inch * 10.63inch * 10.63inch Loading Container 20GP: 870 cartons * 20 pcs = 17400 pcs40HQ: 2021 cartons * 20 pcs = 40420 pcs

Lesen Sie Mehr Weniger