Suchergebnisse für "humidity meter"
-
2100MHz Signal Booster / 3G Signal Repeater with Yagi Antenna, 2100MHz Signal Repeater
Features1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableInstall Repeater1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar) 2. Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal 3. Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal 6. Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least 7. Indoor and outdoor antenna must be separated by wallWorking1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax) 2. After the signal is accepted by the phone amplifier, the device amplifies it 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna 4. And after that, the amplified signal transmits to the cell phoneTechnique Supporting1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 53-57dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 1A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 140mm x 98mm x 20mm Weight 280g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.24kgs / 2.73lb One Package Size 50cm * 17cm * 14cm / 19.69inch * 6.69inch * 5.51inch Qty per Carton 6 Carton Weight 6.79kgs / 14.96lb Carton Size 52cm * 36cm * 44cm / 20.47inch * 14.17inch * 17.32inch Loading Container 20GP: 323 cartons * 6 pcs = 1938 pcs40HQ: 751 cartons * 6 pcs = 4506 pcs
£19.99
-
Wireless Remote Control 433MHz 12V Keychain Key Telecontrol For PSTN GSM Home Burglar Security Alarm System
Features:1. Operation Current:10MA2. Operation Freq:433MHz3. Work of Alarm System4. 4 Button:Arm Away Mode, Arm At home Mode, Emergency Mode and Disarm Mode)5. Sending Distantce:Outdoor 80~100M(no obsctale), Indoor:8~10M6. Operation Temp: -10C~50C;Humidity:no more than 90%Note: 1. we default 433mhz if you dont leave us a message for frequency choice 2. this remote control is not suitable for all alarm system.Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 10cm * 6cm * 4cm / 3.94inch * 2.36inch * 1.57inch Qty per Carton 100 Carton Weight 2.70kgs / 5.95lb Carton Size 42cm * 32cm * 22cm / 16.54inch * 12.6inch * 8.66inch Loading Container 20GP: 901 cartons * 100 pcs = 90100 pcs40HQ: 2093 cartons * 100 pcs = 209300 pcs
£4.99 £1.99
-
LCD Digital Vernier Caliper/Micrometer, Measure Range: 150 mm (6 inch), 150 mm Vernier Caliper
About the product1. 100% brand new and high quality 2. Measurement in both SAE (inch) or Metric (mm) with conversion 3. Zero setting in any position 4. Measurement types: internal dimension, external dimension, depth and steps 5. Made of high quality hardened stainless steel 6. Large LCD display 7. With a small locking thumb screw which locks the jaws in place 8. Automatic turn-off function 9. Measure range: 0 - 6 inch (0 - 150mm) 10. Resolution: 0.0005 inch /0.01mm 11. Accuracy: 0.001 inch /0.02mm (< 4 inch /100mm measurement) 12. Repeatability: 0.0005 inch/0.01mm 13. Maximum measuring speed: 60 inch (1500mm)/sec. 14. Measuring system: linear capacitive 15. Working temperature: 0- 40C 16. Power: One 1.5V LR44 button Cell or One 1.55V SR44 button cell(one included) Note: Accuracy affected in enviroment exceeding 80% relative humiditySpecification: General Material Stainless steel, Plastic Size 240 x 80 x 12mm Package Weight One Package Weight 0.29kgs / 0.63lb One Package Size 25cm * 9.2cm * 2cm / 9.84inch * 3.62inch * 0.79inch Qty per Carton 80 Carton Weight 20.00kgs / 44.09lb Carton Size 42cm * 38cm * 27cm / 16.54inch * 14.96inch * 10.63inch Loading Container 20GP: 618 cartons * 80 pcs = 49440 pcs40HQ: 1436 cartons * 80 pcs = 114880 pcs
£7.99
-
Mobile LED DCS 1800MHz Signal Booster / Signal Repeater with Sucker Antenna, Signal Booster Gold
About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.58kgs / 3.48lb One Package Size 31cm * 23cm * 11cm / 12.2inch * 9.06inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 48cm * 33cm * 24cm / 18.9inch * 12.99inch * 9.45inch Loading Container 20GP: 701 cartons * 4 pcs = 2804 pcs40HQ: 1628 cartons * 4 pcs = 6512 pcs
£47.99
-
Mobile LED GSM 980MHz Signal Booster / Signal Repeater with Yagi Antenna, LED GSM Antenna
About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 15-19dBm, Downlink 15-19dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 186 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.36kgs / 5.21lb One Package Size 52cm * 26cm * 15cm / 20.47inch * 10.24inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 54cm * 28cm * 32cm / 21.26inch * 11.02inch * 12.6inch Loading Container 20GP: 551 cartons * 2 pcs = 1102 pcs40HQ: 1279 cartons * 2 pcs = 2558 pcs
£33.99
-
Motorcycle Bluetooth Tire Pressure Monitoring System TPMS Mobile Phone APP Detection 2 External Sensors, TPMS
1. BLE TPMS product which is designed for smart cellphones and supports cellphone with Bluetooth 4.0 or above 2. One BLE tire sensor installed in wheel, tire pressure and temperature can be displayed in cellphone with APP 3. During travel, tire pressure and temperature displayed in real time and send alert when statistics abnormal Sensor parameters: 1. Processor: ARM M0 2. Working humidity: 95% max 3. Working voltage: 3V 4. Tire pressure detection range: 100-1300kPa 5. Working current: 100uA 6. Tire pressure detection accuracy: +-10kPa 7. Tire temperature detection accuracy: +-3 Degrees Celsius 8. Standby current: <=2.2uA 9. Bluetooth working frequency: 2.4GHz 10. Bluetooth transmitting power: 0dBm max 11. Working temperature: -30-+80 Degrees Celsius 12. Storage temperature: -30-+85 Degrees Celsius 13. Wait time: <=5s 14. Battery capacity: 140mAh 15. Display: phone APP 16. Battery life: 3-5 years 17. Waterproof standard: IP67Specification: General Battery 140mAh Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 4cm / 4.33inch * 4.33inch * 1.57inch Qty per Carton 120 Carton Weight 15.50kgs / 34.17lb Carton Size 42cm * 46cm * 35cm / 16.54inch * 18.11inch * 13.78inch Loading Container 20GP: 394 cartons * 120 pcs = 47280 pcs40HQ: 915 cartons * 120 pcs = 109800 pcs
£23.99
-
2 in 1 Bluetooth 4.0 + 150Mbps 2.4GHz USB WiFi Wireless Adapter
1. Brand new and high quality. 2. Mini portable USB 2.0 design. 3. Wireless speed up to 150Mbps. 4. Quick secure setup. 5. Compatible with 802.11 b/g/n devices. 6. Bluetooth description: - Bluetooth version: Bluetooth 4.0 - The interface type: USB 2.0 / 1.1 - Frequency range: 2.412GHz - 2.482GHz - Working Channel: 0-78 - Modulation mode: GFSK, DPSK - Transmission distance: 10 meters farthest indoor and outdoor 20 meters farthest (varies with the environment) - RF power: 10dBm (max) - Antenna gain: 2dBi - Spread spectrum technology: frequency hopping - Support OS: Windows 7 / 8 / 8.1 / 10 / Linux 7. WiFi description: - Support standards and protocols: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, CSMA/CA with ACK - The interface type: USB 2.0 / 1.1 - Transmission rate: 150Mbps - Frequency range: 2.412GHz - 2.483GHz - Working Channel: 1-14 - Modulation: -- 802.11 g / n: OFDM -- 802.11 b: CK (11, 5.5Mbps), QPSK (2Mbps), BPSK (1Mbps) - RF power: 16dBm (max) - Antenna gain: 2dBi - Support OS: Windows / MAC / LinuxSpecification: General Types Wireless Adapter Material Metal, Plastic Interface USB 2.0 Transmission Rate 150Mbps Standards WiFi IEEE 802.11n WiFi IEEE 802.11g WiFi IEEE 802.11b Size 3.2x1.6x0.8cm Weight 3g Environment Operating Temperature 0 - 40 Degrees Celsius Storage Temperature -20 - 60 Degrees Celsius Operating Humidity 10% to 85% RH non-condensing Storage Humidity 5% to 90% RH non-condensing Package Include Package Contents 1 x Wireless Adapter Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 16.8cm * 10.8cm * 2cm / 6.61inch * 4.25inch * 0.79inch Qty per Carton 100 Carton Weight 1.80kgs / 3.97lb Carton Size 52cm * 24cm * 36cm / 20.47inch * 9.45inch * 14.17inch Loading Container 20GP: 593 cartons * 100 pcs = 59300 pcs40HQ: 1377 cartons * 100 pcs = 137700 pcs
£1.99
-
Mobile LED DCS 1800MHz Signal Booster / Signal Repeater with Yagi Antenna, LED Booster
About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.78kgs / 6.13lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs
£51.99
-
HYD-1004 10 Inch Portable LCD Desktop Tablet Electronic Calendar Writing Pad Board
1. Multifunctional Assistant, Desktop calendar LCD handwriting board is a multifunctional assistant. Possess rich features, the date, time, temperature and humidity are clear at a glance. Suitable for schools, offices, homes, etc. 2. Beautiful and Practical, No dust, no ink, pressure sensitive writing with super clear handwriting, magnetic absorption. The back support can stand up on desktop, not only beautiful and practical. Handwriting memo support one-click clear and reuse. 3. Accurate Display, Accurate time display, 12/24 hour system can be switched as needed. Date, week, year can be displayed, alarm clock can be set Real-time accurate display of current temperature and humidity. Temperature can display Celsius or Fahrenheit as customers required. 4. Wide Application, Suitable for various work scenarios such as calculation work, work memos, group discussions, small blackboards, etc., equipped with a one-click clear function to greatly improve your work efficiency. 5. Life Scenarios, You can write your itinerary on the handwriting board of the desk calendar and set the alarm clock to solve the distress that you are easily forget. In the home, the product can be used for daily messages, recording things, alarm clock reminders and other life scenarios.Specification: Package Weight One Package Weight 0.38kgs / 0.84lb One Package Size 28cm * 21.2cm * 1.5cm / 11.02inch * 8.35inch * 0.59inch Qty per Carton 78 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 90cm * 8cm / 35.43inch * 35.43inch * 3.15inch Loading Container 20GP: 411 cartons * 78 pcs = 32058 pcs40HQ: 955 cartons * 78 pcs = 74490 pcs
£11.99
-
With Adjustable Reflection Board, Speed & RPM & Water Temperature & Oil Consumption & Driving Distance / Time & Voltage Display, Over Speed Alarm, Connect OBD2 Interface, C500(Green), C500(Blue), C500（White)
1. Unique design, HD reflective glass, LED stereo imaging, no double image, without reflective film. Plug & Play,easy to use.High-tech assisted safe driving. 2. Experience the fun of easy driving, practical functions:driving speed, engine speed, water temperature, battery voltage, fuel consumption, mileage, travel time, clock. 3. Auto power on/off. Over speed alarm,high water temperature,low voltage alarm can help to avoid the accidents in advance. 4. 8 Display modes,auto/manual brightness adjustment,very clear under sunlight,and soft light at night.Specification: General Certificate ROHS, FCC, EMC Model C500 Display Type Color LED Barometric Press 86-106KPa Work Environment Work Temperature -40 to 80 degree celsius Relative Humidity 10 - 95 percent Environmental Noise 60db and below Dimension Size 135*68*30mm Package Weight One Package Weight 0.27kgs / 0.60lb One Package Size 16cm * 11cm * 7cm / 6.3inch * 4.33inch * 2.76inch Qty per Carton 60 Carton Weight 17.60kgs / 38.80lb Carton Size 57cm * 45cm * 34cm / 22.44inch * 17.72inch * 13.39inch Loading Container 20GP: 305 cartons * 60 pcs = 18300 pcs40HQ: 709 cartons * 60 pcs = 42540 pcs
£18.99
-
High Quality Stainless Steel Stand Up Oven Thermometer Gauge Gage (0-300 Degree Centigrade), Oven Gauge
1. The Oven Thermometer is used to measure the oven temperature to insure that all of your food is cooked to perfection 2. With a Hanger and stand, you can hang or place the thermometer according to your needs inside the oven 3. Material: Stainless Steel 4. Temperature range: 0~300 degree centigrade 5. Width: 6cm; Height: 7cm; Thickness: 1.5cm (approx.)Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 10.5cm * 2cm / 5.91inch * 4.13inch * 0.79inch Qty per Carton 100 Carton Weight 6.70kgs / 14.77lb Carton Size 46cm * 30cm * 30cm / 18.11inch * 11.81inch * 11.81inch Loading Container 20GP: 644 cartons * 100 pcs = 64400 pcs40HQ: 1495 cartons * 100 pcs = 149500 pcs
£1.99
-
aMagisn For DJI Osmo Action 5 Pro / Action 4 aMagisn Anti-Fog Dive Filter Lens Seamlessly Adapted To Waterproof Cases
1. Suitable for DJI Osmo Action 5 Pro/4 diving filters. Red filter: Enhances warm tones and balances seawater green for more realistic underwater footage; Light red filter: Slightly reduces blue tones to restore natural rosy skin tones; Purple filter: Increases blue tones and suppresses red light.2. Aluminum alloy frame ensures reliable durability. Laser-etched text resists fading and discoloration.3. Identical dimensions to the official protective lens, enabling seamless compatibility with both official and third-party waterproof housings for Action 5 Pro/4.4. Compression seal, waterproof & anti-fog: After installation, the frame tightly compresses the waterproof seal on the host, effectively isolating moisture and condensation within the lens cavity. Enables worry-free capturing underwater, in rain, humid, or low-temperature environments.5. Thickened lens for enhanced protection: 2.0mm thick lens effectively withstands pressure at depths up to 10 meters.6. Material: Aluminum Alloy + Acrylic (PMMA)7. Size: Diameter 32.4 x 6.9 mm8. Weight: 7.5gSpecification: General Compatible with DJI: Osmo Action 5 Pro, Osmo Action 4 Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 12cm * 11cm * 4cm / 4.72inch * 4.33inch * 1.57inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 35cm * 32cm * 42cm / 13.78inch * 12.6inch * 16.54inch Loading Container 20GP: 566 cartons * 180 pcs = 101880 pcs40HQ: 1316 cartons * 180 pcs = 236880 pcs
£5.99
