Suchergebnisse für "led controller"

1. Processor: LX7 dual-core processor 2. Network: 2.4GHz Wi-Fi3. Bluetooth: BLE 5 4. Screen size: 7 inches 5. Resolution: 800 x 480 6. Other Features: On-board antenna, 5-point touch, 65K colors, audio playback, audio capture, PCF85063 RTC clock, BQ27220 battery monitor7. Interfaces: Type-C, Micro SD card slot, 3.5mm8. Power Supply: Supports wide voltage range of DC 7–36V9. Dimensions: Approx. 19.5 x 11.3 x 2.3 cmFeatures:1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz 2. Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE, with an onboard antenna 3. Built-in 512 KB SRAM and 384 KB ROM, with 32 MB Flash and 16 MB PSRAM stacked on the same die 4. On-board 7-inch LCD capacitive touchscreen, 800 x 480 resolution, 65K colors5. Supports I2C interface for capacitive touch control, 5-point touch, and interrupt support 6. On-board ES8389 audio codec chip and ES7210 echo cancellation circuit 7. On-board voltage regulator chip, supporting a wide supply voltage range of 7–36 V 8. On-board RTC chip and battery holder; time is retained during power outages when a battery is installed9. On-board BQ27220 battery fuel gauge for real-time monitoring of battery capacity10. On-board I2C interface, Micro SD card slot, and PH2.0 battery connector11. External LED indicators for easy monitoring of power and battery charging status, including a custom STA status light 12. Supports flexible clock settings and precise control, such as separate module power supply configuration, to enable low-power modes for multiple scenariosSpecification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 23cm * 15cm * 6cm / 9.06inch * 5.91inch * 2.36inch Qty per Carton 20 Carton Weight 9.00kgs / 19.84lb Carton Size 48cm * 32cm * 30cm / 18.9inch * 12.6inch * 11.81inch Loading Container 20GP: 578 cartons * 20 pcs = 11560 pcs40HQ: 1343 cartons * 20 pcs = 26860 pcs

Lesen Sie Mehr Weniger

Details:1. Material: solar panel2. Weight: about 410g3. Size: about 36x11 cm4. Light source: 6 x COB5. Mode: human body induction + light control6. Voltage: 3.7V7. Protection level: IP658. Scope of application: intersections, gardens, basketball courts, streets, etc.9. Note: the remote control comes with a button batteryFeatures:1. Solar battery life, long-lasting lighting2. Wide applicability, no wiring, simple installation3. The COB lamp beads have high brightness, uniform illumination and no eye damage, and a wide range of illumination4. Contains large capacity lithium battery, safe and durable5. Equipped with PTC technology protection, high temperature resistance, lightning protection, waterproofing, and corrosion protection6. Double sensing element, fast sensing distance, light up in advance7. Intelligent light control system, charging during the day and automatically turning on the lights at nightSpecification: Package Weight One Package Weight 0.41kgs / 0.91lb One Package Size 27cm * 12cm * 6cm / 10.63inch * 4.72inch * 2.36inch Qty per Carton 50 Carton Weight 23.10kgs / 50.93lb Carton Size 50cm * 50cm * 46.2cm / 19.69inch * 19.69inch * 18.19inch Loading Container 20GP: 230 cartons * 50 pcs = 11500 pcs40HQ: 535 cartons * 50 pcs = 26750 pcs

Lesen Sie Mehr Weniger

Ring LED1. LED ring light can be mounted on the holder and take it anywhere, it can also be removed from the stand at any time, the tripod ball head can 360 degree rotating can free to adjust to any angle. 2. The ring light is made of 40pcs energy-saving LED beads, it heat dissipation is excellent, constant current drive and high color rendering, soften the light source and enhance skin tone in portraits photography. 4. 3 colors lighting mode adjustable brightness for your choose,you can adjust the color and brightness very easily, good brightness can be achieved without installing extra colorful filters. Three colors of soft natural light illuminate your beauty in different occasions. 5. The USB ports can be used with multiple devices, such as connect computer host, laptop, mobile power and USB charger. You will be able to enjoy LED ring light at any time free. 6. Lightweight and portable design: Convenient to use and carry when you traveling or working outdoor etc. 7. Extensive application: It is widely applied to outdoor photo light, filling light indoors, portrait, fashion, advertisement photography, shooting video etc.Microphone1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity 2. Load impedance: <0.68Kohm 3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones 4. Microphone type: electret condenser microphone 5. Microphone specification: 14*6.5mm 6. Directivity: Single point 7. Frequency response: 20-20000Hz 8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa). 9. Signal to noise ratio: >65DBSPL 10. Test voltage: 1.5VVlogging Rig1. It is a must-have for you, if you love recording high quality videos. It makes shooting videos much easier since you have a much better grip with two handles. 2. With 3 standard shoe mount slot, you can get lighting and microphone attachments. A good tool for who need take higher quality phones or videos close to professional level. 3. The special design will enable you to take steady shots and capture unique life experiences 4. A must-have accessory for anyone wanting to improve their filmmaking skills with a phone that shoots better images than many high end cameras. You can mount it with any tripod, slider or dollies. 5. Compatible with iPhone /Samsung / Huawei / OPPO / vivo / Xiaomi most smartphone with or without a case from 1.7 inch to 4.3 inch wide.Mini Tripod Mount1. Lightweight and portable design, only 150g. 2. Made from thick and sturdy plastic, perfect for shooting action sports footage from a fixed angle, but can also be used as a hand grip to shoot video or photos with your sport camera, compact camera or smartphone. 3. The new push-button mechanism enables you to position and lock the ball head in one rapid, intuitive movement. Pushing the button releases the ball joint to move freely. When the button is released, the ball is locked automatically in the selected position. 4. With this solid construction, it provides a secure base in every situation and the rubber feet guarantee a stable and slip-free on any surface. 5. 1/4 inch universal screw, compatible with Canon/ Nikon/ Sony/Pentax compact cameras and other light weight DSLRs with 1/4 inch thread; suitable for GoPro 5/4/3+, and iPhone, Galaxy, Huawei, Haweel and other smartphones. 6. Load: 1kg. 7. Size: 17.3*5.5*4.3cm.Ring LED Specifications1. Number of beads: 40pcs 2. Lamp bead model: 2835 3. Lamp brightness: 24-26lm 4. White light color temperature: 6500K 5. Warm white color temperature: 3200K 6. Power: 4-8W 7. Voltage: 5V 8. Indicates: Ra>82 9. Dimming range: 1%-100% 10. Shell material: aluminum 11. Dimensions: outer diameter 120mm. inner diameter 86mm 12. Power supply: USB port power supplyPackage List1. Vlogging Rig x 1 2. Microphone x 1 3. Tripod Mount x 1 4. Cold Shoe Tripod Head x 1 5. Ring LED Light x 1 6. USB Cable Wire Control x 1 7. 3.5mm Audio Adapter Cable x 2 8. Color Package Box x 1Specification: General Certificate GPSR Compatible with Apple: iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XR, iPhone X, iPhone 7 Plus, iPhone 6s, iPhone 6 Plus, iPhone 5S Package Weight One Package Weight 0.71kgs / 1.56lb One Package Size 30cm * 26cm * 9cm / 11.81inch * 10.24inch * 3.54inch Qty per Carton 10 Carton Weight 8.20kgs / 18.08lb Carton Size 52cm * 47cm * 32cm / 20.47inch * 18.5inch * 12.6inch Loading Container 20GP: 340 cartons * 10 pcs = 3400 pcs40HQ: 791 cartons * 10 pcs = 7910 pcs

Lesen Sie Mehr Weniger

1. Support development environment, such as ESP-IDF, Arduino, MicroPython, etc.2. 240MHz Xtensa 32-bit LX7 dual-core processor3. Easy to integrate, 32-bit LX7, 2MB PSRAM, wireless network, dual-core processor4. Using ESP32-S3R2 chip, Xtensa 32-bit LX7 dual-core processor, running frequency 240mhz5. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB flash memory6. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with excellent RF performance7. Type-C connector, more convenient to use8. The onboard CH343 and CH334 chips can meet the needs of USB and UART development through the Type-C interface9. Onboard DC-DC chip MP28164, high-efficiency DC-DC step-down boost chip, the load current can reach 2A10. 27 x multi-function GPIO pins, configurable pin functions, allowing flexible development and integration11. Abundant external interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-16-bit camera interface), LCD interface (8-16-bit parallel RGB, 18080, MOTO6800), etc., Flexible realization of various functions12. Castellated modules allow direct soldering to the carrier board13. Support a variety of low-power working states, adjustable communication distance, data rate and power consumption balance, to meet the power consumption requirements of various application scenarios14. Support the ecosystem of Raspberry Pi Pico expansion board, suitable for artificial intelligence loT application development15. Support ESP-IDF, Arduino, MicroPython comprehensive SDK, development resources, tutorials, help you get started easily16. ESP32-S3 is specially designed for AloT applications, using Xtensa 32-bit LX7 dual-core processor with a frequency up to 240 MHz, powerful aluminum computing capability and reliable security features17. WIFI and BLE 5 support, ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 B/G/N) and 40mhz bandwidth to support its Bluetooth low energy subsystem to support Bluetooth 5 (LE) and Bluetooth Mesh18. ESP32-S3: Xtensa 32-bit LX7 dual-core processor19. 2.4G monopole ceramic antenna20. W25Q128JVSIQ: 16MB Flash21. Start button: press to enter download mode when reset22. CH334F: USB HUB controller23. CH343P: USB to UART chip24. MP28164: High-efficiency DC-DC step-down boost chip25. Support more Pico expansion modules: Eval-Board, 3.5-inch LCD, 1.3-inch OLED, 8-segment LED, e-paper, NB-IoT module, GPIO expander, sensor module, RTC module, UPS moduleSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 42cm * 42cm / 20.47inch * 16.54inch * 16.54inch Loading Container 20GP: 290 cartons * 500 pcs = 145000 pcs40HQ: 674 cartons * 500 pcs = 337000 pcs

Lesen Sie Mehr Weniger

1. One touch is bright, illuminate the dark place, colorful conversion2. No need to disassemble, reserved charging port3. Built-in spring switch, long service life4. Snap-on installation, easy to use5. Multiple installations: storage box, armrest box, door, seat corner6. Number of lamp beads: Touch model: 6 single-color LEDs, voice control model: 2 RGB high-brightness lamp beads7. Three adjustment modes: touch sensing, breathing sensing, sound sensing8. Rated power: 5W9. Rated voltage: 5V10. Rated current: 1A11. Power mode: USB charging / built-in lithium battery12. Battery capacity: 150mah13. Lighting time: 3-4 hours14. Material: ABS15. Size: 5.5x3cmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 8cm * 4cm * 4cm / 3.15inch * 1.57inch * 1.57inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 56cm * 56cm * 28cm / 22.05inch * 22.05inch * 11.02inch Loading Container 20GP: 303 cartons * 356 pcs = 107868 pcs40HQ: 705 cartons * 356 pcs = 250980 pcs

Lesen Sie Mehr Weniger

Features:1. Ergonomic Portability: Lightweight design provides a comfortable grip for extended training sessions, simulator practice and travel.2. 10-Channel Customization: Two additional tactile switches expand the output to 10 channels, providing flexible control options for drones, robots, drone soccer and fixed-wing aircraft.3. 5D Trim Adjustments: Two dedicated trim switches allow pilots to fine-tune joystick offsets during flight for precise control and quick balancing.4. Advanced Gimbal Sensor: The gimbal features an anti-wear coating for smooth and precise stick movement with improved durability.5. Wireless Simulator Support: Bluetooth joystick mode enables wireless connection to FPV simulators on compatible PCs, mobile devices and tablets.6. Fast Charging Battery: Built-in 1S 2000mAh LiPo battery provides up to 8 hours of runtime at 25mW and supports 15W fast charging, reaching a full charge in approximately 40 minutes.7. Low-Latency Radio Control: Equipped with BETAFPV radio transmission technology and ExpressLRS 2.4G for responsive and reliable control.Specifications:1. Item: LiteRadio 4 Radio Transmitter2. Channels: 103. Color: Gray 4. Gimbal: Potentiometer (Standard Version), Hall Sensor (Twilight Limited Edition)5. RF System: ExpressLRS 2.4G6. RF Output Power: 25mW / 50mW / 100mW (Adjustable)7. Simulator Connection: Bluetooth and USB-C Cable8. Supported Simulators: Most Compatible Simulators and DJI Virtual Flight9. Port: USB-C, Data Transfer and Charging10. Charging Power: 5V, Max. 3A11. Battery: Built-in 1S 2000mAh LiPo Battery12. Battery Life: 4-5 Hours at 100mW or Up to 8 Hours at 25mW13. Weight: Approximately 210g14. Dimensions: 172.5 x 118.5 x 72.5mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 10cm * 1.5cm / 5.91inch * 3.94inch * 0.59inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 32cm * 50cm / 20.47inch * 12.6inch * 19.69inch Loading Container 20GP: 320 cartons * 200 pcs = 64000 pcs40HQ: 744 cartons * 200 pcs = 148800 pcs

Lesen Sie Mehr Weniger

Product Main Features: 1. Shorten the response speed of the electronic throttle 2. Improve the electronic throttles sensitivity 3. Plug and play without external power supply 4. 5 modes: sports mode / economy mode / original mode / manual mode / automatic mode 6. Super bright LED digital display screen Product Function: 1. Sports mode: This mode will bring very strong sense of controlling the vehicle when driving, it is more suitable for the passionate drivers. 2. Economy mode: This mode is more stable for acceleration, suitable for those that are fond of mild driving and green hands. 3. Original mode: This means the booster had no impact on the vehicle. 4. Manual mode: This mode has the best sports sense, suitable for those that are fond of passionable driving. 5. Automatic mode: The default mode is manual movement mode.Specification: General Compatible with Honda: City Package Weight One Package Weight 0.33kgs / 0.72lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 80 Carton Weight 25.90kgs / 57.10lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 80 pcs = 41760 pcs40HQ: 1212 cartons * 80 pcs = 96960 pcs

Lesen Sie Mehr Weniger

OverviewThe RPi Relay Board (B) is an expansion board with 8-ch relays for Raspberry Pi. It gives your Pi the ability to control high voltage products such as home appliances.Features1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. High quality relays, loads up to 5A 250V AC or 5A 30V DC3. Photo coupling isolation, prevent interference from high voltage circuit4. Standard rail mount bottom case5. Onboard LEDs for indicating relays status6. Relay control pin selection jumper, allows to control the relays by custom pins other than the default pins7. Reserved control Interface, allows to work with controllers like PLC8. Comes with development resources, including examples in wiringPi, bcm2835, python, python-bottle (webpage control), and crontab (cron job)Specifications1. Power supply voltage: 5V2. Trigger signal: 3.3V/5V3. Relay channels: 8-ch4. Contact form: SPDT-NO,NC5. Closed current: 6mA (per channel)6. Connector: screw terminal block7. Dimension: 232 × 72 (mm)8. Mounting hole size: 3.0mmSpecification: Package Weight One Package Weight 0.33kgs / 0.73lb One Package Size 25cm * 9cm * 2cm / 9.84inch * 3.54inch * 0.79inch Qty per Carton 160 Carton Weight 15.00kgs / 33.07lb Carton Size 50cm * 36cm * 40cm / 19.69inch * 14.17inch * 15.75inch Loading Container 20GP: 370 cartons * 160 pcs = 59200 pcs40HQ: 859 cartons * 160 pcs = 137440 pcs

Lesen Sie Mehr Weniger

1. Brand new and high quality 2. Colorful mini rotating lamp 3. Long life up to 8000 hours 4. Simple plug and play installation 5. Suitable for KTV, family party, bars, hotel, DJs, night shop, desk lamp, droplight, wall lamp, night light, holiday lamp, etc. 6. Interface type: E27 7. Power: 3W 8. Power supply: AC 85V-260VSpecification: General Material Plastic, Aluminum Base Types E27 Life Span 8000 hours Power 3 W Size 107 x 60 mm Weight 66 g Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 6.2cm * 6.2cm * 12cm / 2.44inch * 2.44inch * 4.72inch Qty per Carton 100 Carton Weight 8.80kgs / 19.40lb Carton Size 45cm * 38cm * 38cm / 17.72inch * 14.96inch * 14.96inch Loading Container 20GP: 410 cartons * 100 pcs = 41000 pcs40HQ: 952 cartons * 100 pcs = 95200 pcs

Lesen Sie Mehr Weniger

OverviewThis AlphaBot2 robot kit is designed to use with an Arduino compatible controller (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, infrared remote control, Bluetooth communication, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, youre almost there, our open source demo codes is ready to help you get started fast.AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, its more efficient, more compact, and less heating4. N20 micro gear motor, with metal gears, low noise, high accuracy5. Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Ar, the upper adapter board for controller:1. Onboard Arduino interface, into which Arduino controller can be directly plugged2. 0.96inch 128x64 yellow/blue dual color OLED3. TLC1543 AD acquisition chip4. PC8574 I/O expander, avoid I/O shortage5. Xbee connector, for connecting dual-mode Bluetooth modulePackage Contents1. AlphaBot2-Ar (adapter board) x12. AlphaBot2-Base (base chassis) x13. Ultrasonic sensor x14. IR remote controller x15. FC-20P cable 8cm x16. USB type A plug to micro B plug cable x17. AlphaBot2-Ar screws x18. Screwdriver x1 (Extra Free)Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 15cm * 11cm * 9cm / 5.91inch * 4.33inch * 3.54inch Qty per Carton 48 Carton Weight 14.00kgs / 30.86lb Carton Size 60cm * 33cm * 36cm / 23.62inch * 12.99inch * 14.17inch Loading Container 20GP: 374 cartons * 48 pcs = 17952 pcs40HQ: 868 cartons * 48 pcs = 41664 pcs

Lesen Sie Mehr Weniger

Bring the magic of winter to any space. These redesigned Snowflake LED Curtain Lights deliver pure festive charm, indoors or out. Custom-built with a UK-standard plug and upgraded IP44 waterproof rating, they're the practical, beautiful way to transform windows, walls and outdoor spaces into something truly magical. Designed in partnership with the manufacturer, these aren't your average string lights. We've completely re-engineered them with weatherproof materials, a UK 3-pin plug suitable for both UK and Irish sockets, and snowflake pendants that catch the light beautifully. The 3.5-metre run features 16 hanging strings — enough to create a real wow moment across a window, doorway, garden fence or backdrop. Eight built-in lighting modes with memory function let you choose the mood — from gentle slow fades and soft twinkles to chasing flashes and steady-on glow. Choose your colour: warm white for cosy indoor charm, cool white for crisp winter sparkle, multicolour for festive fun, or blue for a calm, icy feel. With a 2-metre lead from plug to controller, tail-plug linking for connecting up to 8 sets together, and ultra-low 6W power draw, these lights are as practical as they are beautiful. Whether you're decorating a home, a shop window, a venue or a wedding backdrop, the Snowflake Curtain Lights deliver real impact for very little effort. Key Highlights Snowflake LED pendants across 16 hanging strings — generous coverage and visual impact 3.5 metres long with droppings of either 0.4m or 0.6m — fits standard windows perfectly IP44 waterproof rated — safe for indoor and outdoor use through rain and snow 8 lighting modes with memory function — Combination, Waves, Sequential, Slo-Glo, Chasing/Flash, Slow Fade, Twinkle/Flash, Steady On Choice of 4 colours — Warm White, Cool White, Multicolour, Blue UK 3-pin plug — compatible with UK and Irish sockets out of the box Tail-plug design — link up to 8 sets together for huge displays 2-metre lead from plug to controller — reaches comfortably to most windows Low 6W power draw — energy-efficient and cool to the touch Long LED lifespan — up to 50,000 hours of use Perfect For A versatile light display that suits any setting or occasion: Window displays and curtain backdrops at Christmas Outdoor patios, decking, fences and garden trees Wedding receptions, photo backdrops and venues Parties, birthdays and celebrations Restaurants, cafés, bars and shop windows Hotels, clubs and event spaces Stages, dance floors and concerts Year-round home decoration Product Specifications Detail Total Length 3.5 metres Number of Strings 16 hanging droppings Drop Length 0.4m or 0.6m Power Consumption 6W Voltage AC 220V–240V (UK / EU) Plug Type UK 3-pin (compatible with UK & Irish sockets) Waterproof Rating IP44 (lights only — controller and plug are not waterproof) Cable Length (plug to controller) 2.2 metres Cable Colour Transparent Material PC (polycarbonate) Lighting Modes 8 modes with memory function Available Colours Warm White, Cool White, Multicolour, Blue LED Lifespan Up to 50,000 hours Condition Brand new, in original packaging Easy to Set Up, Built to Last Designed for stress-free installation and long-lasting performance: Plug straight into any UK or Irish socket — no adaptors needed 8 modes with memory — settings stay saved between uses Connect up to 8 strings together via the tail plug for bigger displays Cool to the touch — safe around curtains, fabrics and children Energy-efficient LEDs keep running costs low all season Lightweight, easy to hang and even easier to pack away Protect the plug and controller from direct rain when used outdoors What's in the Box 1 × Snowflake Curtain Light Set 1 × Mode controller 1 × UK 3-pin plug (pre-fitted) 1 × User manual Original retail packaging Turn any space into a winter wonderland. Add the Snowflake Curtain Lights to your home today — beautifully designed, fully waterproof, and built to make every season feel a little more magical.

Lesen Sie Mehr Weniger

Features1. Powerful Lighting Performance: Features 140 high-quality LEDs (49 white + 49 warm + 42 RGB full-color), covering a wide color temperature range from 2500K to 9000K. With a CRI Greater than 95, it delivers natural and accurate color reproduction. Provides 1000 Lux brightness at 0.3m with a 120 degrees ultra-wide beam angle, ideal for professional video, live streaming, and short-form content creation. 2. Full Device Compatibility: Compatible with DSLRs, mirrorless cameras, camcorders, smartphones, tablets, and laptops. Supports HSI color mode for precise control of hue, saturation, and intensity. Includes 20 built-in lighting effects such as Electric Flash, Patrol Light, Candlelight, and more, easily switchable with one button. 3. Long-Lasting Power System: Built-in 3000mAh lithium-polymer battery supports charging while in use. Features a Type-C fast charging port and provides 2-10 hours of continuous runtime depending on brightness settings. 4. Flexible Mounting Options: Equipped with a 1/4 inch screw mount, compatible with tripods and desktop stands. Comes with a 1/4 inch cold shoe adapter, allowing direct mounting on cameras or other devices for convenient fill lighting. 5. 20 Lighting Effect Modes: Patrol Car, Ambulance, Fire Truck, Electric Flash, Fireworks, TV, Candle, Party, Faulty Bulb, White Breathing Light, Pulse Flash, RGB Flash, Press Flash, Emergency Double Flash, High-Low Beam, Red Flash, Green Flash, Blue Flash, HSI Demo (Slow), HSI Demo (Fast).Specifications1. LED Configuration: 49 x White LEDs 49 x Warm LEDs 42 x RGB LEDs 2. Color Temperature Range: 2500K - 9000K 3. Color Rendering Index (CRI): Greater than or equal to 95 4. Power Output: Adjustable 1W - 8W 5. Operating Voltage: 3.7V 6. Illumination Angle: 120 degrees 7. Battery Capacity: 3000mAh (Li-Polymer) 8. Charging Port: Type-C 9. Charging Time: Approx. 3 hours (5V/2A input) 10. Continuous Working Time: Greater than or equal to 2 hours at maximum brightness 11. CCT Mode: Color Temperature Range: 2500K - 9000K Brightness Range: 0-100% (adjustable) 12. HSI Mode: Hue Range: 0-360 degrees Saturation Range: 0-100% Brightness Range: 0-100%Package List1. RGB fill light x 1 2. 1/4 cold shoe adapter x 1 3. Type-C charging cable x 1Specification: Package Weight One Package Weight 0.33kgs / 0.73lb One Package Size 14cm * 13.5cm * 4cm / 5.51inch * 5.31inch * 1.57inch Qty per Carton 40 Carton Weight 13.20kgs / 29.10lb Carton Size 42cm * 30cm * 30cm / 16.54inch * 11.81inch * 11.81inch Loading Container 20GP: 705 cartons * 40 pcs = 28200 pcs40HQ: 1637 cartons * 40 pcs = 65480 pcs

Lesen Sie Mehr Weniger