Suchergebnisse für "DC Cable Accessories"

Why to use1. Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save life of somebody. 2. Unfortunately, there are still some places where one can find themselves out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: 1) Parking lots, tunnels 2) Big stores, office buildings 3) Cars, boats etc. 4) House in remote areas etcFeatures1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode. 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableHow to work1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax). 2. After the signal is accepted by the phone amplifier, the device amplifies it. 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna. 4. And after that, the amplified signal transmits to the cell phoneHow to install1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar). 2. Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signalNotes1. Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least. 2. Indoor and outdoor antenna must be separated by wallTechnique supports1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 53-57dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 2A Power Consumption <5W RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 100mm x 45mm x 18mm Weight 350g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.00kgs / 2.20lb One Package Size 51cm * 18cm * 13cm / 20.08inch * 7.09inch * 5.12inch Qty per Carton 4 Carton Weight 5.20kgs / 11.46lb Carton Size 53cm * 38cm * 28cm / 20.87inch * 14.96inch * 11.02inch Loading Container 20GP: 472 cartons * 4 pcs = 1888 pcs40HQ: 1097 cartons * 4 pcs = 4388 pcs

Lesen Sie Mehr Weniger

1. Voltage: DC 12V2. Current: 0.6A3. Power: 2W4. Remote control power supply: 1 23A 12V battery (not included)5. Fits board size: 12 x 6 inches6. Material: plastic, metal7. Size: 31.4 x 16.9cmFeatures:1. Like ordinary car license plates, beautiful and elegant2. Durable, anti-oxidation, stable quality, can be used for a long time3. Made of car sheet material, high strength and no rust4. Operation with remote control, easy to use5. Simple installation, can be installed on most standard American vehicles with a flat surface under the bumper coverPacking list:- License plate frame x1- Controller x1- Cable x1- Indicator line x1- Remote control x1- Power cord x1- Screw x4Specification: Package Weight One Package Weight 1.07kgs / 2.35lb One Package Size 32cm * 18cm * 4.5cm / 12.6inch * 7.09inch * 1.77inch Qty per Carton 26 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 26 pcs = 4602 pcs40HQ: 412 cartons * 26 pcs = 10712 pcs

Lesen Sie Mehr Weniger

Technische Daten 1) Passiver Strom- und Video-Balun-Anschluss 2) Sender und Empfänger 3) Video-Balun-Entfernung: 400 m 4) Leistungsentfernung: 250 m 5) RJ45-Buchse Besonderheit: 1) 1-Kanal passiver Video- und Strom-Balun (12 V/24 V DC/AC) 2) Farbvideo bis zu 400 m über UTP Cat5e/6-Kabel 3) Übertragen Sie das Leistungssignal paarweise bis zu 250 m weit 4) RJ45-Buchse für UTP Cat5e/6-Kabel 5) Eingebautes TVS zum Überspannungsschutz 6) Blitzschutzdesign Grad: III 7) Wellenfilter-Design, antistatisches Design 8) Außergewöhnliche Störunterdrückung 9) 50 dB Übersprech- und Störfestigkeit 10) ABS-Konstruktionskunststoffgehäuse 11) Abmessungen: 210 * 29 * 20 mm Spezifikation: Paketgewicht Gewicht eines Pakets 0,09 kg / 0,20 lb Menge pro Karton 120 Kartongewicht 10,90 kg / 24,03 lb Kartongröße 48 cm * 27 cm * 33 cm / 18,9 Zoll * 10,63 Zoll * 12,99 Zoll Container laden 20GP: 623 Kartons * 120 Stück = 74760 Stück 40HQ: 1447 Kartons * 120 Stück = 173640 Stück

Lesen Sie Mehr Weniger

1. Two-in-one function: both a charger and a battery tester2. Battery type: most types of lead-acid batteries, including calcium batteries, gel AGM batteries, wet batteries, lead-acid batteries, etc.3. Application scenarios: home users, car and motorcycle repair shops, battery manufacturers, DIY, schools, scientific research institutions4. The AC power cord can be removed, which is convenient for replacing longer or other required power cords, and is easy to use.5. The automatic charging function prevents the battery from overcharging, and the charger can be connected to the battery for a long time.6. The conductivity test technology can easily, quickly and accurately measure the actual cold starting current capacity of the vehicles starting battery, the health status of the battery itself, and the quality of the battery, helping maintenance personnel to quickly and accurately find problems, thereby achieving rapid maintenance of the vehicle.7. The smart charger is suitable for most types of batteries, including calcium batteries, gel AGM batteries, wet batteries and lead-acid batteries. It can help restore exhausted and sulfated batteries.Parameters1. Cooling method: fan2. Input voltage: 100-240V AC, 50-60Hz3. Output voltage: DC 12V4. Rated output: 12V 6A Max5. Battery capacity range: 4-120Ah6. Thermal protection: 65 degrees Celsius +/- 5 degrees Celsius7. Dimensions: 177x86x57mm8. Weight: 465g9. Input cable length: about 95cm10. Output cable length: about 60cmSpecification: Package Weight One Package Weight 0.57kgs / 1.27lb One Package Size 24cm * 14cm * 7cm / 9.45inch * 5.51inch * 2.76inch Qty per Carton 30 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 44cm * 38cm / 19.69inch * 17.32inch * 14.96inch Loading Container 20GP: 318 cartons * 30 pcs = 9540 pcs40HQ: 740 cartons * 30 pcs = 22200 pcs

Lesen Sie Mehr Weniger

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz, GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain 65dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Automatic Gain Control >20dB Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <2 MTBF >50000h Power Supply AC:90~265V, 50/60Hz; DC:12V 2A Power Consumption <20W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 3.78kgs / 8.34lb One Package Size 39cm * 22cm * 20cm / 15.35inch * 8.66inch * 7.87inch Qty per Carton 4 Carton Weight 15.90kgs / 35.05lb Carton Size 51cm * 45cm * 45cm / 20.08inch * 17.72inch * 17.72inch Loading Container 20GP: 258 cartons * 4 pcs = 1032 pcs40HQ: 599 cartons * 4 pcs = 2396 pcs

Lesen Sie Mehr Weniger

1. Brand new and high quality 2. It can increase humidity of air, reducing dust and bacteria. 3. Bulb shape can rotate different degree that makes full humidification. 4. Drip several drops of natural essential oil into the water to produce natural for aroma so as to make the purified air wet, fragrant, refreshing and clean. 5. With Colorful LED Light. 6. Save energy, convenient to use, durable in use. 7. Compact and lightweight, this humidifier offers portability that is perfect for travel use.Specification: General Material ABS, PP, PET Capacity 400mL Mist Output 25mL/hours Power Supply DC 5V Power 2W Current 500mAh Size 153x88x88mm Weight 235g Package Include Package Contents 1 x User Manual 1 x Humidifier 1 x Sponge (Spare part) 1 x USB Cable Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 16cm * 9.3cm * 9.2cm / 6.3inch * 3.66inch * 3.62inch Qty per Carton 40 Carton Weight 15.20kgs / 33.51lb Carton Size 48cm * 34cm * 40cm / 18.9inch * 13.39inch * 15.75inch Loading Container 20GP: 408 cartons * 40 pcs = 16320 pcs40HQ: 948 cartons * 40 pcs = 37920 pcs

Lesen Sie Mehr Weniger

1. Voltage: DC 12V2. Current: 0.6A3. Power: 2W4. Remote control power supply: 1 23A 12V battery (not included)5. Suitable for license plate size: about 52 x 10.9cm6. Material: ABS, Metal7. Size: about 53.5 x 13.5 x 3cmFeatures:1. Adopt electric shutter design, which can cover the license plate and protect personal privacy2. Durable, anti-oxidation, stable quality, can be used for a long time3. Made of ABS and metal materials, fine workmanship, scratch-resistant, wear-resistant and durable4. Operation with remote control, easy to use5. Simple installation, suitable for European license plates (Europe, Saudi Arabia, UAE, etc.)Packing list:- License plate frame x2- Controller x1- Cable x2- Indicator line x1- Remote control x1- Power cord x1Specification: Package Weight One Package Weight 1.74kgs / 3.84lb One Package Size 56cm * 16cm * 7cm / 22.05inch * 6.3inch * 2.76inch Qty per Carton 8 Carton Weight 15.80kgs / 34.83lb Carton Size 58cm * 44cm * 34cm / 22.83inch * 17.32inch * 13.39inch Loading Container 20GP: 307 cartons * 8 pcs = 2456 pcs40HQ: 713 cartons * 8 pcs = 5704 pcs

Lesen Sie Mehr Weniger

1. Easy to load paper structure design, easy to load paper2. Low noise, high speed printing3. Using high-quality print head, the printing is smooth and durable, and the printing mileage can be as long as 50 kilometers4. Automatic cutter design, smooth paper output, convenient and quick5. Support QR code printing, more sensitive typesetting6. Support system: Windows, Linux, XP7. Paper loading width: 60mm8. Printing speed: 120mm/s9. Printing width: 58mm10. Power supply: DC 24V/1.5A11. Dimensions: 16.93 x 12.2 x 11.3 cm12. Weight: about 500 gramsPacking list:-Printer x 1-Charger x 1-Data cable x 1-Print roll paper x 2-Print APP x 1-Instruction manual x 1Specification: Package Weight One Package Weight 1.40kgs / 3.10lb One Package Size 22cm * 20cm * 15cm / 8.66inch * 7.87inch * 5.91inch Qty per Carton 20 Carton Weight 30.00kgs / 66.14lb Carton Size 60cm * 55cm * 41cm / 23.62inch * 21.65inch * 16.14inch Loading Container 20GP: 197 cartons * 20 pcs = 3940 pcs40HQ: 457 cartons * 20 pcs = 9140 pcs

Lesen Sie Mehr Weniger

Features: 1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitable Install Repeater: 1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar) 2. Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal 3. Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal 6. Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least 7. Indoor and outdoor antenna must be separated by wall Working: 1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax) 2. After the signal is accepted by the phone amplifier, the device amplifies it 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna 4. And after that, the amplified signal transmits to the cell phone Technique Supporting: 1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 58-62dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 1A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 140m x 98mm x 20mm Weight 280g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual 1 x Signal Booster Package Weight One Package Weight 1.18kgs / 2.59lb One Package Size 50cm * 20cm * 8cm / 19.69inch * 7.87inch * 3.15inch Qty per Carton 10 Carton Weight 13.50kgs / 29.76lb Carton Size 52cm * 42cm * 42cm / 20.47inch * 16.54inch * 16.54inch Loading Container 20GP: 290 cartons * 10 pcs = 2900 pcs40HQ: 674 cartons * 10 pcs = 6740 pcs

Lesen Sie Mehr Weniger

Beschreibung: 1) Verwenden Sie eine differenzielle Signalübertragung mit ausgezeichneter Anti-Jamming-Fähigkeit 2) Sparen Sie Kosten für Projektkabel, da jedes Twisted-Pair-Kabelpaar einen Kanal des Videosignals überträgt und ein gemeinsames ungeschirmtes Cat-5-Twisted-Pair-Kabel gleichzeitig ein Videosignal übertragen kann 3) Vollbild-CCTV-Video auf Entfernungen bis zu 330 m bei Verwendung mit einem passiven UTP-Video-Transceiver 4) Bis zu 1500m mit jedem aktiven UTP-Videoempfänger 5) Kein Strom erforderlich 6) Eingebauter Schutz zur Unterdrückung von Überspannungen Technische Daten: 1) Frequenzgang: DC-8MHz 2) CMRR (Gleichtaktunterdrückungsverhältnis): 60 dB 3) Impedanz: BNC-Anschluss: 75Ω, Anschlussklemme: 100Ω 4) Arbeitstemperatur: -10 °C - 70 °C 5) Lagertemperatur: -30°C - 70°C 6) Gilt für NTSC-, PAL-, SECAM- und CCIR-Systeme. 7) Stromversorgung: DC 12 V (max.: 50 mA) 8) Charakteristische Impedanz: 100Ω ± 20Ω 9) Gleichstromschleifenwiderstand: 18Ω/100m 10) Differenzielle Kapazität: 62pf/m (maximal) 11) Größe: 157 x 65 x 29 mm 12) Gewicht: 167g Spezifikation: Paketgewicht Gewicht eines Pakets 0,35 kg / 0,78 lb Menge pro Karton 24 Kartongewicht 9,20 kg / 20,28 lb Kartongröße 40 cm * 30 cm * 30 cm / 15,75 Zoll * 11,81 Zoll * 11,81 Zoll Container laden 20GP: 740 Kartons * 24 Stück = 17760 Stück 40HQ: 1719 Kartons * 24 Stück = 41256 Stück

Lesen Sie Mehr Weniger

Features1. H.264, 8ch 960P/720P/960H/ D1 wireless network hard disk DVR. 2. Built-in high performance stability wireless Wi-Fi router module, support 802.11b/g/n protocol, 150Mbps. 3. Automatically access the Wi-Fi network camera through the network cable. 4. Video preview / video / playback / backup. 5. Ease of use (wireless easy pairing, setup wizard, common function menu, easy to view network). 6. Support N1, IPC access protocol. 7. Supported network service functions: P2P, DHCP, DDNS, PPPoE, E-Mail, FTP, etc. 8. Support a variety of alarm trigger (video loss / motion detection, etc.) and alarm output (sound / E-Mail / FTP, etc.). 9. Support Android/Apple mobile phone (or tablet) remote (LAN and Internet) access and control. 10. Support PC (client or browser) remote (local area network and Internet) access and control. 11. Support IPC configuration (encoding control, image adjustment, OSD display, etc.). 12. Support video motion detection with IPC. 13. Support video cover function with IPC. 14. Support user rights management.NVR1. Professional industrial processor. 2. Embedded linux operating system. 3. Network video input 8 channels 960P, 20Mbps network video access bandwidth. 4. HDMI output: 1 channel, resolution: 1024x768, 1366x768, 1440x900, 1920x1080p. 5. VGA output: 1 channel, resolution: 1024x768, 1366x768, 1440x900, 1920x1080pIP Camera1. 1/4 inch Progressive scan sensor, 1280*720 resolution. 2. Streaming: Two streaming at the Same Time: - H.264 1280x720@15fps or below - H.264 640x360@15fps or belowSpecification: General Shape Bullet Power Depletion <6W(Camera) Power Supply DC 12V 1.0A DNR Auto Network Network Interface RJ45 10/100MB Ethernet interface Wireless WiFi 802.11 b/g/n System / Hardware Sensor Size 1/4 inch Progressive Scan Pixels 1.0MP Lens 3.6mm SNR > 39.1dB Day/Night Auto / Color / BW Minimum Illumination B/W: 0.01Lux, Color: 0. 1Lux White Balance Auto Media Format Main Stream 1280 x 720 Sub Stream 640 x 360 Night Vision IR LED 1 infrared LED NVR System Operating system: Embedded LINUX OS Recording Recording mode: Manual recording, motion detection recording, time recording, alarm recording Playback mode: Instant playback, regular playback, event playback Backup mode: Regular backup NVR Interface 1 x VGA, 1 x HDMI, 1 x RJ45, 2 x USB 2.0 Video input D1, 960H, 720P, 960P, 1080P, 8ch Video interface Video output: 1ch VGA and 1ch HDMI, Network video Input: 8ch HDMI Output Resolution 1024x768, 1366x768, 1440x900, 1920x1080 Network 1 x RJ45 / 10/100MB USB Port 2 x USB 2.0 HDD SATA HDD (not included), Max 4TB Power DC 12V 3.0A Power consumption <= 5W Dimensions Size 205*70*55mm(camera); 257*210*45mm (NVR) Weight 500g (Camera); 1kg (NVR) Package Include Package Contents 8 x Cameras 1 x Mounting Accessories 1 x USB Mouse 1 x NVR 1 x User Manual 1 x Network Cable 9 x Power Adapters (US, UK, EU, AU Optional)) Package Weight One Package Weight 7.70kgs / 16.98lb One Package Size 52cm * 36cm * 26cm / 20.47inch * 14.17inch * 10.24inch Qty per Carton 2 Carton Weight 16.50kgs / 36.38lb Carton Size 52cm * 38cm * 52cm / 20.47inch * 14.96inch * 20.47inch Loading Container 20GP: 259 cartons * 2 pcs = 518 pcs40HQ: 602 cartons * 2 pcs = 1204 pcs

Lesen Sie Mehr Weniger

1. 4-slot independent charging, which can be used to charge AAA, AA, C or D batteries at the same time or at random, and can charge two 9V batteries 2. AC 100-240V wide voltage, universal worldwide. 3. Multiple protections, more at ease of use. 4. LED indicator shows charging status. 5. The flip cover design prevents the charger equipment from being damaged. 6. The power cord is 1m long, free from distance constraints, making it easier to use. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 1.2V 600mA, 9V 25mA, AA / AAA / SC / C / D 150mA. 3. No-load power consumption: 1W (maximum). 4. Full-load power consumption: 5W (maximum). 5. Size: 19.5x9.3x5.3cm. Packing list: Charger host x 1 Power cable x 1 Manual x 1Specification: Package Weight One Package Weight 0.40kgs / 0.88lb One Package Size 21.5cm * 11.3cm * 7.3cm / 8.46inch * 4.45inch * 2.87inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 46cm * 42cm / 19.69inch * 18.11inch * 16.54inch Loading Container 20GP: 276 cartons * 40 pcs = 11040 pcs40HQ: 640 cartons * 40 pcs = 25600 pcs

Lesen Sie Mehr Weniger