Suchergebnisse für "USB Antenna Accessories"

Overview1. This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 868MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 868MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Lesen Sie Mehr Weniger

1. Weight: about 80 grams2. Material: plastic shell3. Application: mainly used for Android system car navigation integrated machine4. Support frequency range: 174MHz-239MHz5. Function: DAB/DAB+ receiving function, support local automatic search, RDS, DLS, program picture refresh, channel list, signal strength display6. Specifications: USB interface, antenna interface SMA, built-in 5V output7. Features: beautiful and practical, widely applicable, easy to use, plug and play8. Description: equipped with source amplifier glass film antenna (3M line)Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 20cm * 12cm * 3cm / 7.87inch * 4.72inch * 1.18inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs40HQ: 412 cartons * 356 pcs = 146672 pcs

Lesen Sie Mehr Weniger

Overview1. The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption. 2. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.Applicable Region1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China. 2. Please check the supported bands according to your local service provider, select the proper one when placing order.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ 2. Support dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. 3. Support GPS, BeiDou, Glonass, LBS base station positioning 4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on 5. Onboard CP2102 USB to UART converter, for serial debugging 6. Breakout UART control pins, to connect with host boards like Arduino/STM32 7. SIM card slot, supports 1.8V/3V SIM card 8. Onboard audio jack and audio decoder for making telephone call 9. 2x LED indicators, easy to monitor the working status 10. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper 11. Baudrate: 300bps-4Mbps (default: 115200bps) 12. Autobauding baudrate: 9600bps-115200bps 13. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set) 14. Support SIM application toolkit: SAT Class 3, USAT 15. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Communications Specifications1. Band: A. LTE: - SIM7600A-H: LTE-FDD B2/B4/B12 - SIM7600E-H: LTE-FDD B1/B3/B5/B7/B8/B20, LTE-TDD B38/B40/B41 - SIM7600CE-T: LTE-TDD B38/B39/B40/B41, LTE-FDD B1/B3/B8 B. WCDMA / TD-SCDMA/ CDMA 2000 - SIM7600A-H: UMTS/HSPA+ B2/B5 - SIM7600E-H: UMTS/HSPA+ B1/B5/B8 - SIM7600CE-T: UMTS/HSDPA/HSPA+ B1/B8, TD-SCDMA B34/B39, CDMA 1X/EVDO BC0 C. GSM/GPRS/EDGE 900/1800 MHz 2. Generation: 4G, 3G, 2.5G, 2G 3. Emitting power: 0.25W, 0.5W/EGSM900, 0.4W/DCS1800, 2W/GSM900, 1W/DCS1800 4. Data Speed - LTE CAT 4: Uplink=<50 Mbps, Downlink=<150 Mbps - UMTS: Uplink=<384Kbps, Downlink=<384Kbps - EDGE: Uplink=<236.8kbps, Downlink=<236.8kbps - GPRS: Uplink=<85.6kbps, Downlink=<85.6kbps - HSPA+: Uplink=<5.76Mbps, Downlink=<42MbpsGNSS Specifications1. Receiver type - 16-channel - C/A code 2. Sensitivity - Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD) - Cold starts: -148 dBm 3. Time-To-First-Fix (open air) - Cold starts: <35s - Hot starts: <1s 4. Accuracy - Position: <2.5m CEPSMS and Audio Specifications1. SMS - Support types: MT, MO, CB, Text, PDU - Storage: USIM card and ME (default) 2. Audio feature - Support echo cancellation - Support noise reductionOther Specifications1. Power supply: 5V 2. Operating voltage: 5V/3.3V (configured via jumper) 3. Operating temperature: -30 degree C ~ 80 degree C 4. Storage temperature: -45 degree C - 90 degree C 5. Dimension: 56.21mm x 65.15mmWhat is on Board1. SIM7600CE-T 2. CP2102 USB to UART converter 3. NAU8810 audio decoder 4. TXS0108EPWR voltage translator: Translates 3.3V/5V into 1.8V 5. MP2128DT power chip 6. MP1482 power chip 7. Raspberry Pi GPIO header: For connecting with Raspberry Pi 8. SIM7600 control interface: For connecting with host boards like Arduino/STM32 9. SIM card slot: Supports 1.8V/3V SIM card 10. TF card slot: Allows file/SMS/...storage 11. 3.5mm earphone/mic jack 12. USB interface: For testing AT Commands, getting GPS positioning data, etc. 13. USB to UART interface: For serial debugging, or login to Raspberry Pi 14. MAIN antenna connector 15. AUX antenna connector 16. GNSS antenna connector 17. Power switch 18. Network status indicator 19. Power indicator 20. Operating voltage selection jumper: - VCCIO-3.3V: set operating voltage as 3.3V - VCCIO-5V: set operating voltage as 5V 21. UART selection jumper: - A: Access Raspberry Pi via USB to UART - B: Control the SIM7600 by Raspberry Pi - C: Control the SIM7600 via USB to UARTPackage List1. SIM7600CE 4G HAT x1 2. LTE Antenna x1 3. GPS External Antenna (B) x1 4. USB type A plug to micro plug cable x2 5. RPi screws pack (2pcs) x1Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 15cm * 8cm * 3cm / 5.91inch * 3.15inch * 1.18inch Qty per Carton 260 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch Loading Container 20GP: 284 cartons * 260 pcs = 73840 pcs40HQ: 661 cartons * 260 pcs = 171860 pcs

Lesen Sie Mehr Weniger

Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Lesen Sie Mehr Weniger

Overview1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1268 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12682. Frequency band: 410.125 ~ 493.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 110mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1268 433MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 433MHz antenna x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Lesen Sie Mehr Weniger

1. Supports functions including dial-up internet access, voice calls, SMS, TCP, UDP, MQTT, HTTP(S) and FTP(S) 2. Supports GPS, Beidou, GLONASS, GALILEO, QZSS and LBS base station positioning 3. On-board USB 3.1 interface, backward compatible with USB 2.0, which can be connected to Jetson Orin motherboard, computer or Raspberry Pi for high-speed 4G internet access 4. On-board M.2 B KEY standard interface and pin setting switch, compatible with optional SIM8260X-M2/SIM8262X-M2 / RM5XX / SIM7600 series modules 5. On-board 4-channel SMA to IPEX antenna conversion interfaces, enabling more convenient antenna installation 6. Reserved UART pad interface, which facilitates data transmission and other functions with certain modules via this interface 7. On-board audio interface and audio decoding chip, applicable for voice operations like making calls with SIMXXX series modules 8. On-board power switch, reset button and LED indicator, making it easy to control the modules on/off status and check its operating condition 9. On-board high-efficiency power circuit, capable of outputting up to 3A current Specifications: 1. Chip Solution: Qualcomm MDM9607 2. Module Dimensions: 42 x 31.4 x 3.8mm 3. Operating Frequency Bands: --LTE-FDD: B1,B2,B3,B4,B5,B7, B8,B12,B13,B18,B19, B20,B25,B26,B28, B66 --LTE-TDD: B34,B38,B39,B40, B41 --WCDMA: B1,B2,B4,B5,B6,B8, B19 4. Data Transmission Rate: LTE 150Mbps (DL, Downlink) / 50Mbps (UL, Uplink)Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 14cm * 10cm * 6cm / 5.51inch * 3.94inch * 2.36inch Qty per Carton 48 Carton Weight 13.10kgs / 28.88lb Carton Size 30cm * 42cm * 38cm / 11.81inch * 16.54inch * 14.96inch Loading Container 20GP: 556 cartons * 48 pcs = 26688 pcs40HQ: 1292 cartons * 48 pcs = 62016 pcs

Lesen Sie Mehr Weniger

1. Communication distance (without interference or obstruction): 15KM MAX2. Channels: 13 physical channels; 16 communication channels3. Data transmission support for flight Controllers: Open-source flight controllers such as PIX, APM, etc.; Boying Paladin v2; Jiyi K3A Pro / K++; Weike Zhifei V7AG4. Video transmission support for ground stations: QGroundControl; MissionPlanner; Jiyi IFLY / Flight Control Manager; Boying Agriculture; Weike Zhifei V7Pro Ground Station5. 15KM wireless digital video transmission, dual-channel full HD video real-time display6. Lightweight handheld ground station equipped with a 5.5-inch high-definition high-brightness display, with a brightness of up to 1000 nits, still clearly displaying ground station information and high-definition video transmission images even in direct sunlight outdoors.7. Equipped with a qualcomm octa-core high-performance CPU, easily hard-decoding H.264/H.265, 1080P 60fps video streams, and capable of running various ground station software at high speed.8. Equipped with an R1M card recording high-definition camera interface, plug-and-play, real-time image reading, providing a wider and clearer field of view.Ground station1. Display device: 5.5-inch 1080P High-definition High-brightness LCD Touch Display2. System configuration: Android 9.0, 2G RAM, 16G Storage3. Dimensions: (Antenna folded) 189.09 x 137.95 x 69.72 (mm)4. Weight: 850g5. Battery capacity and type: 10200mAh, 7.4V 2S Lithium-ion battery6. Fast charging protocol: PD 20W7. Charging time: 5h (20W fast charging)8. Operating time: 13h9. Functional interfaces:- Charging: Type-C- Firmware upgrade: DATA (4PIN)- - Mobile network: SIM card slot- External storage: TF card slot- Tripod mount: 1/4 inch threaded hole- Video output: Standard HDMI- External RTK: DATA (4PIN)- External USB drive: USB-A10. Waterproof rating: IP53Package contents:- EyeLink-RC-S1 x 1- MK15 sky unit and omnidirectional antenna x 1- Range extender antenna x 1- USB upgrade data cable x 1- PWM and PIX flight controller data transmission cable x 1- R1M card recording HD camera x 1- PD Fast charging data cable with dual type-C ports x 1- Sky unit 8PIN connection cable x 1- 20W PD US standard fast charger x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.95kgs / 2.10lb One Package Size 22cm * 17cm * 10cm / 8.66inch * 6.69inch * 3.94inch Qty per Carton 12 Carton Weight 12.50kgs / 27.56lb Carton Size 46cm * 36cm * 32cm / 18.11inch * 14.17inch * 12.6inch Loading Container 20GP: 503 cartons * 12 pcs = 6036 pcs40HQ: 1168 cartons * 12 pcs = 14016 pcs

Lesen Sie Mehr Weniger

1. 2 DIN 9 inch TFT Capacitive Touch Screen. 2. Android 6.0 system 3. Super High Definition with 1024 x 600 pixel 4. 1.2G Quad Core CPU with 1G DDR3 5. Build in 16G Flash Memory for Music/Navigation Map Data/Video 6. AM/FM Radio, Auto Memory Store/Preset Scan 7. Mirror Link for Smart Phone 8. Build-in Bluetooth 4.0 with A2DP/Hands Free/Phone book 9. 2 x Rear USB Input 10. Build-in GPS receiver, compatible with Waze/Navfree/Google Map etc 11. Back Camera Input 12. Preset Multi EQ Settings 13. Volume/Fader/Balance/Treble/Bass Control 14. Multimedia Player Compatibility with all format 15. 4 x 45W Power Output 16. 2 Channel RCA Output 17. 2CH rear video input 18. 2CH rear RCA input 19. 2CH rear audio output 20. build in WIFI 21. Steering Wheel Control 22. Language: Japanese traditional Chinese Chinese simplified the Indonesian Malay Czech Denmark German English Spanish Filipino French Croatia Italian Latvia, Hungary, the Netherlands Norwegian polish Portuguese Roman slovak language Finnish, Swedish Vietnamese Turkish Greek Russian Ukrainian Bulgarian Hebrew Urdu Arabic Persian Hindi Bengali Thai, Burmese Korean. 23. Accessories: 1 x VW Android Player 1 x GPS Antenna 1 x Power Harness new VW harness style 1 x Power Harness old VW harness style 1 x CANBUS box 1 x Radio Antenna Adapter 2 x USB adapter 1 x Camera Input 1 x RCA Input/Output 1 x User ManualSpecification: General Compatible with Volkswagen: Bora, Teramont, T-ROC, Leon, Tiguan L, Lavida, VW Sagitar, Lamando, Golf 7, VW Scirocco, VW Old Magotan, VW New Magotan, VW Sharan, POLO, Amarok, Santana 3000, Golf Alltrack, Golf SportWagen, Golf R, e-Golf, Tiguan, Routan, CC, R32, Eos, Rabbit, GTI, Touareg, Phaeton, Beetle, Cabrio, EuroVan, Vanagon, Passat, Jetta, Golf, Fox, Corrado, Cabriolet, Touran Package Weight One Package Weight 1.17kgs / 2.58lb One Package Size 28cm * 22cm * 10.5cm / 11.02inch * 8.66inch * 4.13inch Qty per Carton 10 Carton Weight 15.05kgs / 33.18lb Carton Size 46cm * 42cm * 36cm / 18.11inch * 16.54inch * 14.17inch Loading Container 20GP: 383 cartons * 10 pcs = 3830 pcs40HQ: 890 cartons * 10 pcs = 8900 pcs

Lesen Sie Mehr Weniger

parameter:1. Material: ABS2. Color: black3. Rated working voltage: 12V/24V4. Working voltage limit: 9-32V5. USB output: 5V/1A6. USB2 output: QC3.07. Working temperature: less than 60 degrees Celsius8. Music format: MP39. Compatible with TF card capacity: 1G-32G10. Bluetooth version: 4.2 + EDR11. Modulation mode: QPSK12. Frequency: 177MHz-240MHz13. Non-channel memory: support14. Frequency modulation transmission: 87.5MHz-108MHz15. Effective transmission distance: 0.5-2 meters16. Bluetooth effective distance: less than 10 metersFeatures:1. DAB/DAB+ receiver2. Slide show function, FM full frequency transmission3. Support image display, display name display function4. Bluetooth music and call response5. USB music playback and charging function/SD music playback6. Use FM transmission technology to wirelessly transmit DAB+/DAB radio to your existing car radio amplifier7. Service tracking function and quick scan to find the next available free DAB/DAB+ frequency8. Line output function, get the best sound quality by connecting to the auxiliary input of the car9. The cigarette lighter provides power10. With magnetic support, easy to install and adjust the position of the equipment11. With car adsorption antenna12. Strong versatility, no need to install any software on the vehicle host, you can use AUX to connect with the vehicle host, applicable to the vehicle host with AUX13. Product list: host transmitter, DAB antenna, audio cable, base, English description, car charger, charging cable, adapterSpecification: Package Weight One Package Weight 0.14kgs / 0.31lb One Package Size 20cm * 12cm * 3cm / 7.87inch * 4.72inch * 1.18inch Qty per Carton 208 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 208 pcs = 36816 pcs40HQ: 412 cartons * 208 pcs = 85696 pcs

Lesen Sie Mehr Weniger

L76X Multi-GNSS HAT for Raspberry Pi, Supports GPS, BDS, QZSSOverview1. This is a Raspberry Pi GNSS HAT which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.2. It is an easy way to enable global positioning function for your Raspberry Pi.Features1. Support Multi-GNSS systems: GPS, BDS, and QZSS2. EASY, self track prediction technology, help quick positioning2. AlwaysLocate, intelligent controller of periodic mode for power saving3. Support DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)4. UART communication baudrate: 4800~115200bps (9600bps by default)5. Onboard battery holder, supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts6. 4x LEDs for indicating the module working status7. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)GNSS Specifications1. Band: GPS L1(1575.42Mhz), BD2 B1 (1561.098MHz)- Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch- C/A code- SBA: WAAS, EGNOS, MSAS, GAGAN2. Horizontal position accuracy:- Autonomous: <2.5mCEP3. Time-To-First-Fix @-130dBm (EASY? enabled):- Cold starts: <15s- Warm starts: <5s- Hot starts: <1s4. Sensitivity:- Acquisition: -148dBm- Tracking: -163dBm- Re-acquisition: -160dBm5. Dynamic performance:- Altitude (max): 18000m- Velocity (max): 515m/s- Acceleration (max): 4GGeneral Specifications1. Communication interface: UART2. Baudrate: 4800~115200bps (9600bps by default)3. Update rate: 1Hz (default), 10Hz (max)4. Protocols: NMEA 0183, PMTK5. Power supply voltage: 5V / 3.3V6. Operating current: 13mA7. Operating temperature: -40 degree C ~ 85 degree C8. Dimensions: 65mm x 30.5mmApplications1. Vehicle tracking2. Asset tracking3. Security system4. Industrial PDA5. GIS applicationWhat is on Board1. L76B module2. CP2102: USB TO UART converter3. CAT24C32: EEPROM4. RT9193-33: Power manager5. Backup mode wakeup button6. Standby switch7. Indicators:- RXD/TXD: UART RX/TX indicator- PPS: GPS status indicator- PWR: Power indicator8. Raspberry Pi GPIO connector: For connecting with Raspberry Pi9. USB TO UART port10. GNSS antenna connector11. Battery holder: Support ML1220 rechargeable battery, for preserving ephemeris information and hot starts12. UART selection jumpers- A: control the L76B through USB TO UART- B: control the L76B through Raspberry Pi- C: access Raspberry Pi through USB TO UARTPackage Contents1. L76X GPS HAT x12. GPS External Antenna (B) x13. USB type A plug to micro plug cable x14. RPi screws pack (2pcs) x15. 2x20PIN pinheader x1Specification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 720 pcs = 221760 pcs40HQ: 716 cartons * 720 pcs = 515520 pcs

Lesen Sie Mehr Weniger

1. Material: ABS 2. Memory: TF card (M) 3. GPS positioning accuracy: 10 meters 4. Built-in battery: 400mAh lithium battery 5. Battery life: 160 hours 6. Waterproof function: life waterproof 7. Antenna type: LBS+WIFI 8. External power supply form: USB 9. Dimensions: 3.3x2.2x1.6 cm 10. Functions: Real-time positioning, strong magnetic adsorption, intelligent alarm, multi-unit management, electronic fence, historical trajectory query 11. App Name: QXGPS (Free to use)Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 8cm * 6cm * 4cm / 3.15inch * 2.36inch * 1.57inch Qty per Carton 194 Carton Weight 30.00kgs / 66.14lb Carton Size 46cm * 34cm * 23cm / 18.11inch * 13.39inch * 9.06inch Loading Container 20GP: 741 cartons * 194 pcs = 143754 pcs40HQ: 1720 cartons * 194 pcs = 333680 pcs

Lesen Sie Mehr Weniger

Features1. Environmental, safe, portable, mini 2. Support 802.11b/g/n Wireless transmission protocol, the transmission rate is 300Mbps. 3. Support general power and high-power modes 4. Professional Intelligent WiFi repeater 5. WiFi intelligent bridge function, Wireless switch wired, wired switch wireless, intelligent switch 6. WiFi intelligent repeater mode, it supports WiFi hot spot scan automatically and WiFi hot spot memory function 7. Support WEB remote firmware upgrade, free to get the latest firmware. 8. Support WEB management, Chinese and English configuration interface 9. Using USB for power, also convenient to use power bank for power 10. Adopt the original creation D/A temperature compensated auto frequency control technology (TAFC), the lasting stability ensure that the WiFi signal is not dropped 11. Original creation VDNS virtual domain configuration technology to solve the user trouble of configuration 12. Support connecting more than 20pcs WiFi terminal at the same time. 13. Support WPA-PSK/WPA2-PSK, 64/128/WEP security mechanism. 14. The good partner of remote monitoring, long range WiFi signal coverage. 15. Input voltage (DC5V-24V), Need not extra power supply, reducing e-waste. 16. The transmission distance (without obstacle): 500mSpecifications1. Transmission protocol: 802.11b/g/n 2. Frequency: 2.4GHz 3. Transmission rate: 300Mbp 4. Working voltage: DC 5V-24V (typical 5V) 5. Dimensions: 94 x 45 x 15mm 6. Weight: 62gSpecification: General Model VAP11G-500 Types Repeater Material ABS Interface USB 2.0, RJ45, DC IN Transmission Rate 300Mbps for WiFi Wireless Security WPA2-PSK WPA-PSK 64/128 Bit WEP WPA2 WPA Antenna Types Built-in Intelligent omnidirectional antenna Standards WiFi IEEE 802.11n WiFi IEEE 802.11g WiFi IEEE 802.11b Size 90*45*15mm Weight 90g Package Weight One Package Weight 0.11kgs / 0.23lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 50 Carton Weight 4.25kgs / 9.37lb Carton Size 52cm * 29cm * 21cm / 20.47inch * 11.42inch * 8.27inch Loading Container 20GP: 842 cartons * 50 pcs = 42100 pcs40HQ: 1954 cartons * 50 pcs = 97700 pcs

Lesen Sie Mehr Weniger