Suchergebnisse für "Waterproof Phone Case"

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 15-19dBm, Downlink 15-19dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 186 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.36kgs / 5.21lb One Package Size 52cm * 26cm * 15cm / 20.47inch * 10.24inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 54cm * 28cm * 32cm / 21.26inch * 11.02inch * 12.6inch Loading Container 20GP: 551 cartons * 2 pcs = 1102 pcs40HQ: 1279 cartons * 2 pcs = 2558 pcs

Lesen Sie Mehr Weniger

General specifications:1. Product size: 45x10mm2. Case material: PC+ABS3. Strap material: silicone strap4. Product weight: 37g5. Waterproof level: IP676. Battery life: 7-10 days (depending on usage scenarios)7. Charging time: Less than or equal to 3H8. Compatible with smartphone systems: Android 4.4 or IOS 8.0 or above systems that support Bluetooth 5.0 BLE9. Watch firmware language: Russian, Indonesian, German, Italian, Czech, Japanese, French, Polish, Simplified Chinese, Traditional Chinese, English, Portuguese, Spanish, Arabic, Korean, Dutch, Hindi10. APP language: Russian, Indonesian, German, Italian, Czech, Japanese, French, Polish, Simplified Chinese, Traditional Chinese, English, Portuguese, Spanish, Arabic, KoreanHardware Configuration:1. CPU: RK8752X2. RAM: 160KB3. ROM: 384KB4. Flash: 64Mb5. Heart rate chip: VC116. Bluetooth: BLE5.07. Display: 1.83 inch, 240x280 IPS display8. Physical buttons: 19. Touch: Full screen touch10. Battery: 270mAh Software configuration:1. Other functions: QQ/WeChat/Facebook/Line/WhatsApp and other reminders2. Basic functions: weather, incoming call, Information reminder, Pedometer, Alarm clock, Find a phone, Photo control, music control, Mileage calculation, Countdown, Raise the hand on the screen, Stopwatch3. Bluetooth call connection: Connect 1 time4. Health management: Sleep monitoring, heart rate, blood pressure, Blood oxygen, Calorie monitoring, temperature detection, Sedentary reminder5. Sports modes: 24 sports modesSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 15cm * 10cm * 2.5cm / 5.91inch * 3.94inch * 0.98inch Qty per Carton 100 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 32cm * 27cm / 20.47inch * 12.6inch * 10.63inch Loading Container 20GP: 593 cartons * 100 pcs = 59300 pcs40HQ: 1377 cartons * 100 pcs = 137700 pcs

Lesen Sie Mehr Weniger

General specifications:1. Product size: 44.7x10.5mm2. Case material: aluminum alloy, ABS+PC3. Strap specifications: 22mm silicone strap (removable and replaceable)4. Product weight: 40g5. Waterproof level: IP676. Battery life: 5-7 days (depending on usage scenarios)7. Charging time: Less than or equal to 2H8. Compatible with smartphone systems: Android 4.4 or IOS 9.0 or above systems that support Bluetooth 5.2 BLE9. APP name: Glory Fit10. Watch firmware language: Russian, Indonesian, German, Italian, Czech, Japanese, French, Polish, Simplified Chinese, Traditional Chinese, English, Portuguese, Spanish, Arabic, Korean, Dutch, Hindi11. APP language: Russian, Indonesian, German, Italian, Czech, Japanese, French, Polish, Simplified Chinese, Traditional Chinese, English, Portuguese, Spanish, Arabic, KoreanHardware Configuration:1. MCU: RTL8763EWE2. RAM: 64KB3. ROM: 521KB4. Flash: 128Mb5. Heart rate chip: LC11S6. Bluetooth: BLE5.27. Display: 1.83 inch, 240x280 TFT display8. Physical buttons: 19. Touch: Full screen touch10. Battery: 300mAhSoftware configuration:1. Built-in dials: 6 built-in dials, supports custom dials2. Basic functions: Data, Female physiological cycle, exercise mode, call history, contacts, call reminder/answer/reject, music, message push, sedentary reminder, alarm clock, wrist flip screen on/off, shake to take a photo, do not disturb mode, search for phone, step count, countdown, stopwatch3. Bluetooth call connection: Connect 1 time4. Health management: Sleep monitoring, heart rate, blood pressure, blood sugar, Blood oxygen, temperature detection5. Sports modes: 100+ sports modesSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 15cm * 10cm * 2.5cm / 5.91inch * 3.94inch * 0.98inch Qty per Carton 100 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 32cm * 27cm / 20.47inch * 12.6inch * 10.63inch Loading Container 20GP: 593 cartons * 100 pcs = 59300 pcs40HQ: 1377 cartons * 100 pcs = 137700 pcs

Lesen Sie Mehr Weniger

General specifications:1. Product size: 44.7x10.5mm2. Case material: ABS+PC3. Strap specifications: 22mm silicone strap (removable and replaceable)4. Product weight: 40g5. Waterproof level: IP676. Battery life: 5-7 days (depending on usage scenarios)7. Charging time: Less than or equal to 2H8. Compatible with smartphone systems: Android 4.4 or IOS 9.0 or above systems that support Bluetooth 5.2 BLE9. APP name: Glory Fit10. Watch firmware language: 17 languages (Russian, Indonesian, German, Italian, Czech, Japanese, French, Polish, Simplified Chinese, Traditional Chinese, English, Portuguese, Spanish, Arabic, Korean, Dutch, Hindi)11. APP language: 15 languages (Russian, Indonesian, German, Italian, Czech, Japanese, French, Polish, Simplified Chinese, Traditional Chinese, English, Portuguese, Spanish, Arabic, Korean) Hardware Configuration: 1. MCU: RTL8763EWE2. RAM: 64KB3. ROM: 521KB4. Flash: 128Mb5. Heart rate chip: LC11S8. Bluetooth: BLE5.29. Display: 1.83 inch, 240x280 TFT display10. Physical buttons: 111. Touch: Full screen touch12. Battery: 300mAh polymer battery Software configuration:1. Built-in dials: 6 built-in dials, supports custom dials2. Basic functions: Data, Female physiological cycle, exercise mode, call history, contacts, call reminder/answer/reject, music, message push, sedentary reminder, alarm clock, wrist flip screen on/off, shake to take a photo, do not disturb mode, search for phone, step count, countdown, stopwatch3. Bluetooth call connection: Connect 1 time4. Health management: Sleep monitoring, heart rate, blood pressure, blood sugar, Blood oxygen, temperature detection5. Sports modes: 100+ sports modesSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 15cm * 10cm * 2.5cm / 5.91inch * 3.94inch * 0.98inch Qty per Carton 100 Carton Weight 12.00kgs / 26.46lb Carton Size 52cm * 32cm * 27cm / 20.47inch * 12.6inch * 10.63inch Loading Container 20GP: 593 cartons * 100 pcs = 59300 pcs40HQ: 1377 cartons * 100 pcs = 137700 pcs

Lesen Sie Mehr Weniger

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz, GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain 65dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Automatic Gain Control >20dB Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <2 MTBF >50000h Power Supply AC:90~265V, 50/60Hz; DC:12V 2A Power Consumption <20W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 3.78kgs / 8.34lb One Package Size 39cm * 22cm * 20cm / 15.35inch * 8.66inch * 7.87inch Qty per Carton 4 Carton Weight 15.90kgs / 35.05lb Carton Size 51cm * 45cm * 45cm / 20.08inch * 17.72inch * 17.72inch Loading Container 20GP: 258 cartons * 4 pcs = 1032 pcs40HQ: 599 cartons * 4 pcs = 2396 pcs

Lesen Sie Mehr Weniger

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED 3G signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/ 60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.79kgs / 6.15lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Lesen Sie Mehr Weniger

1. Main control chip: 7013A2. Gravity sensor: Roma KXTJ3-10573. Cardiac chip: VP555ER4. Optical chip: double PD-VP555ER5. Temperature sensor: contact temperature sensor6. Blood oxygen chip: infrared light + red light true blood oxygen7. Bluetooth: 5.0 BLE 8. Screen: 1.57-inch 200x320 large touch screen9. Touch control: full-screen touch control, cell phone APP control10. Charging mode: magnetic charging (with protection)11. Waterproof level: IP6712. Battery capacity: 230mAh high-density polymer lithium battery13. Charging time: about 3-4h14. Use time: about 3-7 days15. Standby time: about 30 days16. Watch language: Chinese, Russian, English, Japanese, German, French, Italian, Spanish, Portuguese17. APP language: Simplified Chinese, Traditional Chinese, English, Hungarian, Turkish, German, Italian, Czech, Slovak, Japanese, French, Polish, Persian, Portuguese, Spanish, Vietnamese, Arabic, Korean18. Compatible systems: Android 4.4 and above, iOS 8.2 and above19. Shell material: metal alloy + stainless steel20. Bottom case material: PC + ABS + 316 steel plate21. Wrist strap material: environmental protection silicone / leather22. Size: about 4.5 x 2.9 x 1.1cmFunction:1. Support: ECG ECG function, Bluetooth call, non-invasive blood glucose measurement, HRV function, AI medical diagnosis, Meituo function, temperature monitoring, blood oxygen monitoring, respiratory training, stress monitoring, womens health (menstrual tracking), heart rate monitoring, blood pressure monitoring, sleep monitoring, sedentary reminder, and other health features2. Exercise function: step/calorie/distance counting, multi-sport mode3. Other functions: stopwatch, flashlight, countdown, step counting, calorie counting, distance counting, sleep monitoring, sports mode, incoming call reminder, alarm clock reminder, hand-raising screen, social sharing (WeChat, QQ, Facebook, Twitter), etc.4. Message alerts: incoming calls, SMS, emails, WeChat, QQ, etc.5. Caring: family sharing real-time data6. Dial selection: APP multiple dial selection, customized dials7. APP Name: HbandSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 12cm * 18cm * 5cm / 4.72inch * 7.09inch * 1.97inch Qty per Carton 50 Carton Weight 7.50kgs / 16.53lb Carton Size 51cm * 37cm * 20cm / 20.08inch * 14.57inch * 7.87inch Loading Container 20GP: 706 cartons * 50 pcs = 35300 pcs40HQ: 1640 cartons * 50 pcs = 82000 pcs

Lesen Sie Mehr Weniger

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.58kgs / 3.48lb One Package Size 31cm * 23cm * 11cm / 12.2inch * 9.06inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 48cm * 33cm * 24cm / 18.9inch * 12.99inch * 9.45inch Loading Container 20GP: 701 cartons * 4 pcs = 2804 pcs40HQ: 1628 cartons * 4 pcs = 6512 pcs

Lesen Sie Mehr Weniger

1. Main control chip: Realtek 87622. Gravity sensor: ST83213. Heart rate sensor: VC3OF 24 hours continuous heart rate acquisition4. Bluetooth: Bluetooth LE 5.05. LCD: 1.47-inch IPS screen 172x320TFT6. Touch control: dual-point touch left and right slide operation + single-touch operation, mobile APP control7. Charging mode: magnetic charging8. Waterproof: IP68 waterproof9. Battery capacity: 200mAh high-density polymer lithium battery10. Watch language: Chinese, Traditional Chinese, English, Japanese, Korean, German, Russian, Spanish, Italian, French, Portuguese, Swedish, Turkish, Polish11. APP language: Chinese, Traditional Chinese, English, Japanese, Korean, German, Russian, Spanish, Italian, French, Portuguese, Swedish, Turkish, Croatian, Slovenian, Mongolian, Polish language12. APP system: Android 4.4 and above, iOS 9.0 and above13. Face shell material: curved high-strength tempered glass14. Bottom case material: PC+ABS+Metal Lacquer15. Wristband material: environmental protection silicone16. Size: about 4.4 x 2.5 x 1.1cmFunction:1. Support: blood glucose / uric acid / blood lipids / body temperature / sleep monitoring2. Health monitoring: 24-hour continuous dynamic heart rate monitoring (with in vivo detection function), blood pressure monitoring, accurate and independent blood oxygen, real-time body temperature monitoring, sleep monitoring, pressure measurement, blood glucose monitoring, uric acid monitoring, blood lipid monitoring3. Other functions: stopwatch, pedometer, calorie counting, distance, exercise mode, incoming call reminder, alarm reminder, sedentary reminder, raise your hand to light up the screen, social sharing (WeChat, QQ, Facebook, Twitter), etc., turn your wrist to take a picture, women health, high temperature reminder, high heart rate reminder, water reminder, medication reminder, access to WeChat movement4. Multi-sport mode: exercise records, multi-sport mode (pedometer, calorie burning, mileage, can display the exercise trend graph for each time period)5. Message reminders: incoming calls, SMS, emails, WeChat, QQ, etc.6. Support: family and friends care, call rejection7. Dial selection: APP a variety of dial options, customized dials8. APP name: DeepFit9. OTA upgrade: support10. Auxiliary functions: find cell phone, find bracelet, dial switchingSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 200 Carton Weight 21.00kgs / 46.30lb Carton Size 50cm * 43cm * 32cm / 19.69inch * 16.93inch * 12.6inch Loading Container 20GP: 387 cartons * 200 pcs = 77400 pcs40HQ: 899 cartons * 200 pcs = 179800 pcs

Lesen Sie Mehr Weniger

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.78kgs / 6.13lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Lesen Sie Mehr Weniger

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 15-19dBm, Downlink 15-19dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 186 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.39kgs / 3.07lb One Package Size 31cm * 20cm * 11cm / 12.2inch * 7.87inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 42cm * 33cm * 24cm / 16.54inch * 12.99inch * 9.45inch Loading Container 20GP: 801 cartons * 4 pcs = 3204 pcs40HQ: 1861 cartons * 4 pcs = 7444 pcs

Lesen Sie Mehr Weniger