Suchergebnisse für "Network Equipment"

Notes:1. There are MOS and other components on the board, which are easily damaged by soldering iron induction electricity or static electricity. Please make sure that the soldering iron used is grounded (and the ground wire of the power strip is connected). It is best to wear anti-static gloves when operating.2. Be careful not to install the battery upside down, otherwise the board may burn.3. Please choose a power supply with sufficient power. Only in this way can the board work properly.4. The board power supply should not be higher than 5V.5. Please do not modify the board without technical confirmation.6. It is normal for the module to heat up when working at high power, just pay attention to fanning.Product Introduction:1. This product is suitable for power-off equipment without power outages. When there is power, use external power supply, and automatically switch to battery power supply seamlessly when there is a power outage.2. If the USB interface is used for power supply, it is recommended to use the Type-c interface. Compared with the microUSB interface, the current that can pass is much larger, and the maximum current that can pass is 5A.3. Suitable for routers, cameras, development boards and other devices, seamlessly switch to battery power when power is off, and keep the network connected when power is off.4. Seamless switching between external power supply and battery dual power supply (no delay)5. Uninterrupted power supply, automatic start when power is off, automatic charging when incoming call.6. Output voltage 5V/9V/12V optional, other voltages can be customized.7. Four practical functions: lithium battery charging, lithium battery protection, boost output, and UPS switching.8. Two-color LED indicates charging status, the green light is always on when full, and charging stops automatically.9. Type-C interface, large current.10. Product size: 89 x 42mm11. Weight: about 37gFunction description:1. UPS function: When the power supply is powered, the power supply directly supplies power to the load through the boost circuit, and charges the lithium battery at the same time. Once the power supply is off, the battery path is automatically started to supply power to the load through the boost circuit.2. Boost circuit: peak power up to 20W, rated power up to 15W, BOST boost circuit, built-in 12A high current MOS, efficiency up to 96%, module static power consumption 25mA, optional 5V/9V/12V output.(Load normal recommendation <15W. Output 5V: current 3A, output 9V: current 1.6A, output 12V: current 1.2A)3. Lithium battery protection overcharge, over discharge, over temperature, over current protection (if short-circuited by mistake, it will enter the protection state and no output, and it will automatically activate and restore output when connected to 5V charging)Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 7cm * 4cm / 4.72inch * 2.76inch * 1.57inch Qty per Carton 144 Carton Weight 9.80kgs / 21.61lb Carton Size 38cm * 30cm * 50cm / 14.96inch * 11.81inch * 19.69inch Loading Container 20GP: 467 cartons * 144 pcs = 67248 pcs40HQ: 1086 cartons * 144 pcs = 156384 pcs

Lesen Sie Mehr Weniger

1. Based on the RP2350 main controller, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. Equipped with a Raspberry Pi Radio Module 2, supporting Wi-Fi 4 wireless network and Bluetooth 5.2 (Wi-Fi module version only).4. Built-in 520KB SRAM and 16MB on-chip Flash. Uses a Type-C interface, eliminating concerns about correct plug orientation.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage; no additional power supply is required for the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.14. Rail-mounted ABS protective casing for easy installation and safer use.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Controllable via USB. Identified as a mass storage device for drag-and-drop program downloading18. 34 multi-functional GPIO pins19. 1 HSTX pin, 2 I2C pins, 2 UART pins, 8 12-bit ADC pins, and 24 controllable PWM channels20. 12 programmable I/O (PIO) state machines for custom peripheral supportProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled with a jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power supply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs

Lesen Sie Mehr Weniger

Über das Produkt 1. Dies ist ein professionelles Netzwerkkabelortungsgerät, das für die Kabelverfolgung entwickelt wurde. 2. Kann Ihnen helfen, das Kabel in einer Vielzahl von Kabeln schnell und effizient zu finden. 3. Es ist ein notwendiges Instrument bei der routinemäßigen Wartung von Netzwerkkabeln, Kommunikationskabeln und Metallleitungsbauprojekten 4. Der Sender wird mit 3 x AAA-Batterien (1,5 V) betrieben (nicht im Lieferumfang enthalten). 5. Der Empfänger wird mit einer 6F22 9V-Batterie (im Lieferumfang enthalten) betrieben. Funktionen 1. Verfolgung von Leitungen über große Entfernungen 2. Überprüfung der Internet-Kabelbestellung 3. Überprüfung der vorhandenen Verdrahtungsspannung 4. Messung der positiven oder negativen Kennlinie der Verdrahtungsspannung. 5. Prüfung auf Kurzschlüsse in der Verkabelung 6. Anzeige für niedrigen Batteriestand 7. Tastempfindlichkeit und Lautstärkeregelung 8. Kopfhöreranschluss-Ausgang 9. Taschenlampe Packungsinhalt 1 x Sender 1 x Empfänger - 1 x RJ11-Kristallkopfverkabelung - 1 x RJ45-Kristallkopfverkabelung - 1 x Krokodilklemmen-Verkabelung 1 x englisches Benutzerhandbuch 1 x 6F22 9V Batterie Spezifikation: Allgemein Signalverfolgung - Übertragungsdistanz >1 km Betriebstemperatur -10 ~ 40 Grad Celsius Lagertemperatur -20 ~ 60 Grad Celsius Luftfeuchtigkeit bei Betrieb 10 – 95 % Sendergröße 119 mm x 64 mm x 31 mm Sendergewicht 119,2 g Empfängergröße 177 mm x 48,6 mm x 26 mm Empfängergewicht 68,8 g Paketgewicht Gewicht eines Pakets 0,30 kg / 0,67 lb Einheitspackungsgröße 23 cm * 13,5 cm * 6,5 cm / 9,06 Zoll * 5,31 Zoll * 2,56 Zoll Menge pro Karton 20 Kartongewicht 5,60 kg / 12,35 lb Kartongröße 65 cm * 30 cm * 30 cm / 25,59 Zoll * 11,81 Zoll * 11,81 Zoll Container laden 20GP: 455 Kartons * 20 Stück = 9100 Stück 40HQ: 1058 Kartons * 20 Stück = 21160 Stück

Lesen Sie Mehr Weniger

1. Type-C hub includes 1x USB-A 3.0, 1x 4K@30Hz HDMI, 1x 85W PD In USB-C, 1x SD reader and 1x microSD (TF) card reader. Connect all the peripherals you need with this 8-in-1 multi-function USB-C hub, including a wireless mouse, a wireless keyboard, a USB flash drive, an external monitor, a laptop charging cable, an SD, and a microSD.2. Type-C hub provides you with realistic 4K 3840 x 2160@30Hz HDMI images can well mirror or expand your screen to high-definition TV, monitor or projector for full high-definition movies, 3D video games, office meetings and entertainment, bringing you an immersive 3D resolution experience.3. The Type-C dock has an ultra-high data transmission speed of up to 5Gbps, 10 times faster than USB2.0, and can transfer large files in a few seconds.4. It is made of precision milling aviation grade aluminum shell, which can provide better heat dissipation.5. Note: This product may require an adapter or converter to use at your destination. Please check compatibility before purchasing.6. The multi port Type-C adapter supports the connection of smart phones, laptops, computers, etc. Extensive compatibility can almost meet the requirements of USB-C equipment. Many devices are easily accessible. Plug and play.7. 4K ultra-high definition HDMI output: use this Type-C hub HDMI port to mirror or expand your screen, and 4K@30Hz Ultra HD video is streamed directly to HD TV, monitor or projector!8. Type-C to RJ45 100M Ethernet port: USB C docking station supports 100Mbps Ethernet port. The Ethernet port ensures a more stable and faster wired network connection.9. Type-c PD3.0: It supports 100W power input, and the power output (charging) is limited to 85W to ensure safety. The PD port is only used for charging and does not support data transmission.Note:1. Some HDMI to DP cables may not have enough power or are incompatible with the product, so display data transmission cannot be carried out.2. TF and SD slots cannot be used at the same time.3. The PD port is only used for charging and does not support data transmission.4. The final resolution of HDMI output depends on whether your host device supports 4K.5. If the USB C port of the laptop does not support DP ALT, then all hubs on the market do not support your laptop to HDMI output. Therefore, please ensure that the USB C port of the laptop supports DP ALT.6.2.4 GHz wireless devices (such as wireless keyboard and mouse), MIDI devices, and some USB 3.0 devices may not be supported, or may not work near hubs or other USB 3.0 devices.7. USB C 2.0 and USB-A 2.0 are incompatible with some high-end drives and devicesSpecification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 20cm * 10cm * 3cm / 7.87inch * 3.94inch * 1.18inch Qty per Carton 100 Carton Weight 9.00kgs / 19.84lb Carton Size 40cm * 40cm * 30cm / 15.75inch * 15.75inch * 11.81inch Loading Container 20GP: 555 cartons * 100 pcs = 55500 pcs40HQ: 1289 cartons * 100 pcs = 128900 pcs

Lesen Sie Mehr Weniger

USB C to HDMI VGA USB Hub Adapter 5 in 1 USB 3.1 Converter for Laptop for MacBook,ChromeBook Pixel,Huawei MateBook5-in-1. This Multiport Adapter convert your type-C port to 1x HDMI output, 1x VGA output and 3x USB3.0 output. Replaces need for multiple adaptors.Convert laptop signal via USB-C port to HDMI or VGA port of projector, monitor, TV, and other display equipment. The HDMI and VGA ports cannot be used simultaneously, it cannot display dual screens.High Resolution Supported: HDMI/VGA resolution up to 1920x1200@30Hz, enjoying HD video output at a larger monitor.For HDMI female interface, it can work with Samsung Galaxy S8/S8+/Note8/S9/S9+, Huawei Mate10/Mate10 Pro/P20/P20 Pro. Connect to external display and TV with HDMI interface, enjoy larger display for better experience. (Note: Cant work with other smartphones, such as LG G5. Do not support Samsung Dex Mode. For VGA female interface, it cant work with smartphones.)USB 3.0 Port: Allow you to connect an external keyboard, mouse, or USB flash drives. Transfer your data easily. SuperSpeed Data: Up to 5 Gbps data speeds let you transfer an HD movie in seconds.Aluminum Housing: Sleek design and resisting corrosion, the aluminum shell ensures better heat dissipation, provide rigidity and offers you better signal performance.Specifications:Material: Aluminum alloy and high quality ABS plasticCore type: Copper coreConnector A: USB 3.1 type C male ( DisplayPort Alternate Mode )Connector B: HDMI female + VGA female + 3*USB3.0 femaleUSB 3.1 Type C latest interface, the pros and cons can be used.High-performance digital chip processing.Using environment: -20℃ to 65℃Relative humidity: 5% to 95%Notice (This is very important):1. This adapter is compatible with laptop only, it will be not compatible with Smart Phones, Tablets or Tablet PCs. (It cant work with Alienware.)2. Your laptop must support "DisplayPort Alternate Mode" (DP Alt Mode) via USB-C.3. If the product doesnt work, please connect the adapter to your device first, then restart your device.4. For some compatible devices, it might take a few seconds for the data to synchronize from computer with your monitor, please be patient.5. For some compatible devices, the USB 3.0 port sometimes can not work normally. This problem is caused by the incompatibility of the system, not by the product itself.6. DO NOT connect other adapter/converter to this adapter for a second signal convert, we cant guarantee it works well.7. The HDMI and VGA ports cannot be used simultaneously, it cannot display dual screens.8. No audio output via VGA! When connecting VGA display alone, please connect an audio cable for audio transmission.9. This isnt a bi-directional adapter. Can only convert signal from Type-C to HDMI/VGA/USB3.0 port.10. Some USB-C/Thunderbolt 3 hosts only support 1 external display.11. For a stable connection, dont use this hub with high power-consumption devices, such as external hard drives.12. 2.4Ghz wireless devices, such as wireless keyboard and mouse adapters, may not work in close proximity to USB 3.0 devices or hubs. Connecting to a USB 2.0 port is recommended.13. This USB 3.0 hub is not meant to serve as a stand-alone charger. It is not compatible with iPads or any other devices with irregular charging requirements.14. If you are in wireless network zone, please switch to 5Ghz transmission signal if your router/Wi-Fi supports. 2.4Ghz signal may have conflict with the adapter.Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 14.5cm * 8cm * 2cm / 5.71inch * 3.15inch * 0.79inch Qty per Carton 100 Carton Weight 9.00kgs / 19.84lb Carton Size 20cm * 30cm * 30cm / 7.87inch * 11.81inch * 11.81inch Loading Container 20GP: 1481 cartons * 100 pcs = 148100 pcs40HQ: 3439 cartons * 100 pcs = 343900 pcs

Lesen Sie Mehr Weniger

Specification1.Type: Laser Camera Detector Finder2.Detecting Frequency Range: 1MHz C 6500MHz3.Laser Detecting Range of Wired Cameras (Self-shoot): 0.1m C 20m4.Detecting Range of RF Device: 0.05m-10m (Subjected to the Transmitting Power of the RF Device)5.Power Supply: Built-in Lithium Polymer Battery 450mAH6.Current Consumption: 8mA7.iewing Lens: IR Filtered Lens8.Self-shoot Detecting Wave Length: 920nm9.Material: ABS10.Dimension: approx. 93 x 48 x 17mm/ 3.66 x 1.89 x 0.67 Features:1. Environmental economy, high temperature resistant, corrosion resistant2. Convenience in installation3. Super environmental suitability and stability4. Low-voltage prompts, built-in rechargeable battery Laser Detection: Windows host can be seen through the eyes of all within sight of the camera facing the camera5. With auto detection function, the host to carry, when the live environment of eavesdropping devrces, pinhole cameras, Casino gambling fraud, etc, the host will be in your auto-body vibrationprompts risk6. With a signal strength indicator lights that can quickly find the signal at source7. Adjust potentiometer adjustable sensitivity. (Greater sensitivity to widen the scope of or reduce the sensitivity to detect reduced Detection range) quickly identify the waves at source.Detection mode:1. Laser detection,2. Vibration (Mute) detection,3. Beep detection,4 LED display detection,5.Headset.This device has active laser scanning and passive wireless signal detector, for tracking: eavesdropping devices, Telephone eavesdropping, digital eavesdropping, tracking, vehicle eavesdropping and spying devices. A Full-range all-round Detector, Hidden Camera Laser Lens GSM Device Finder. 1. Professional equipment, detects most of the wireless cameras and audio bugs for RF frequency detection 2. Easy Operation and Portable with auto-detection function, when there is the eavesdropping devices or spy camera, it will be vibrate to prompt risk. Small dimension, convenient to carry 3. Detection Range: The laser detection camera distance is 10cm-10m. And the radio wave detection camera distance is 5cm-10m 4. Adjustable Detection Sensitivity: Can be connected with the earphone to have a more covert detection 5. Multifunction Detector: This wireless detector can sweep the wired or wireless CCD and CMOS lens. It can also detect phone lens, spy camera, GSM, eavesdropping devices. Frequency detection range (1MHz-6.5GHz) 6. CC308+ Anti-Spy RF Signal Bug Detector Laser Camera Lens GSM Device Finder by SPY-TV! Detects Radio Frequency Within Range! Application 1. Detect whether your car or office is bugged by wireless wiretap or surveillance devices.2. Detect whether eavesdropping device is installed like GPS tracking, GPS location tracker in your car.3. Detect whether the circumstances are suspicious live radio signals.4. Detect whether there is secret device: 5.8 GHz wireless web camera, wireless eavesdropping devices or wire monitor signal.5. Detect whether your cell phone is tapped or abnormal (standby transmit signals from outside for no reason).6. Detecting your working environment and residential buildings have rooftop base station radiation.7. Detect SMS send and receive signals, cell phone internet signals, cell phone switch and call signals.8. Detect wireless network signals, cell phone base station signals and the field density of wireless monitoring system.9. Detect whether you live in the environment known as the "mobile phone killer" strong radiation.10. Check whether hotels, toilets, entertainment venues, changing rooms have wireless pinhole cameras.11. Check whether the leakage of electromagnetic radiation from household electrical appliances such as microwave ovens, etc.Package:1 x CC308+ Full-frequency detector Almighty1 x Earphone1 x Charger1 x User Manual Note:Please allow slight deviation due to manual measurement.Due to light and screen difference, the items color may be slightly different from the pictures.Specification: Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 17cm * 13cm * 3cm / 6.69inch * 5.12inch * 1.18inch Qty per Carton 80 Carton Weight 9.00kgs / 19.84lb Carton Size 36cm * 54cm * 32cm / 14.17inch * 21.26inch * 12.6inch Loading Container 20GP: 428 cartons * 80 pcs = 34240 pcs40HQ: 995 cartons * 80 pcs = 79600 pcs

Lesen Sie Mehr Weniger

Feature1. Built-in wireless driver, installation without CD-ROM, get rid of the tedious wireless driver installation process 2. Support new generation of WiFi6, fast speed, low latency, large capacity, more secure 3. External 4 x 5dBi high-gain antennas with strong signal, provide better wireless penetration, whether it is games, video, audio, video, can be smooth and comfortable 4. Equipped 1.2M extension cable, more flexible placement, support USB3.0, backward compatible with USB2.0 and other interfaces 5. Compatible with mainstream Win 10/11 systems 6. Support for USB3.0, faster and more efficient transmission, and backward compatibility with USB2.0. Specifications1. Chipset: RTL8832BU 2. Antenna: With 4x5dBi high gain antenna 3. Wireless frequency: 2.412GHz-2.484GHz, 5.180-5.825GHz 4. Transmission rate: 1800Mbps 5. Wireless standards: IEEE 802.11a/b/g/n/ac/ax 6. Interface: USB3.0, USB2.0 7. Encryption: WPA2, WPA3 8. Support system: Windows 10 (32 bits , 64 bits), Windows 11(64 bits ) 9. Working environment: - Operating Temperature: 0-40 degree Celsius - Storage Temperature: -40~70 degree Celsius - Operating Humidity: 10%~90%RH No-condensing - Storage Humidity: 5%~90%RH No-condensing 10. Size: 101mmx98mmx175mmSpecification: General Certificate CE Package Weight One Package Weight 0.30kgs / 0.66lb One Package Size 27.7cm * 12.5cm * 5.8cm / 10.91inch * 4.92inch * 2.28inch Qty per Carton 80 Carton Weight 23.25kgs / 51.26lb Carton Size 61cm * 53cm * 59cm / 24.02inch * 20.87inch * 23.23inch Loading Container 20GP: 139 cartons * 80 pcs = 11120 pcs40HQ: 324 cartons * 80 pcs = 25920 pcs

Lesen Sie Mehr Weniger

Brand Name:XIAOKOA Style:Tabletop Use:Computer Microphone Transducer:Condenser Microphone Set Type:Single Microphone Model Number:A2cable Communication:Wired Package:Yes Polar Patterns:Omnidirectional Product Introduce :? Portable Plug&Play:USB Condenser Microphone simply plugs it into any available USB port.Select it as input in your software settings without driver or software installed.Great use for PC/Notebook/laptop/Desktop/Macbook.? Distinctive Omnidirectional Microphone: USB computer mic Designed to filter out background noises for crisp.Noise cancellation and isolates the main sound source by the sponge cover to protect the sound quality. Allows you to be heard lound and crystal clear.? Flexible & Mute Button Design:360°Flexible goosenecks microphone allows you to adjust the perfect angle , height or swivel to show your charming voice.The on/ off button setting of the steady wide stand allows you to fix the unexpected noise.? Multifunctional Usages:This type of computer mic is good for network chatting, singing,home studio, gaming,Skype,Discord, Speech,Yahoo Recording, YouTube Recording, Google Voice Search, Steam,podcast and desktop recording. Product descriptionSpecificationsCompatible with: Macbook/Desktop/Notebook/PCMicrophone Directivity: Omnidirectional USB microphone Dimension:10.3 in *3.2 inImpedance:2.2KΩSensitivity：-58db±3db Frequency Response：30hz-16000hzRate Power:3v Plug Type:usb..........................Plug-and-play USB microphone is great choice for skype, youtube audio , gaming ps4,meeting and conference..............................Simply plug in and start recording-Directly to your computer via usb with the NEWHAODI pc microphone,a great choice for both vocal and recording as well as for creating podcasts for videos,compatible with both Windows and Mac OS operating systems.You can simply plug the usb computer microphone into your PC, macbook air,chromebook, start recording ,streaming with friends,speech recognition.Record studio-quality audio-Record studio-quality audio with desktop microphone directly to your computer.Excellent for vocals .Just get it by clicking “ADD TO CART”. NotePlease set up manual if your computer can not recognize the microphoneStep 1:Go to your desktop and right-click the volume icon (the one that looks like speakers) and select “Recording Devices” .Step 2:Choose the 2-AK5371 microphone .If not defualt ,please click “set Defualt” .Step 3:Click the step 2 “Microphone” twice to adjust sound volume and other parameters according to your option.Then click ok to finish.Package include★1xUSB Condenser Microphone★1x Anti-spray sponge ★1x 48” length usb cable ★1x usb mic instruction Note:This device is not compatible with Window 8-10 systemsSpecification: Package Weight One Package Weight 0.18kgs / 0.39lb One Package Size 15cm * 7cm * 6cm / 5.91inch * 2.76inch * 2.36inch Qty per Carton 49 Carton Weight 7.74kgs / 17.07lb Carton Size 54cm * 25cm * 21cm / 21.26inch * 9.84inch * 8.27inch Loading Container 20GP: 940 cartons * 49 pcs = 46060 pcs40HQ: 2183 cartons * 49 pcs = 106967 pcs

Lesen Sie Mehr Weniger

1. Klarer tintenfreier Druck: Dieser Minidrucker ist mit einem hochwertigen Thermodruckkopf ausgestattet, der klare Schwarzweißbilder ohne Tintenpatronen oder Verbrauchsmaterialien liefert. Mit einer Auflösung von bis zu 200 dpi können verschiedene Bilder schnell und einfach gedruckt werden. 2. Kabellose Bluetooth-kompatible Verbindung: Der tragbare Thermodrucker unterstützt eine kabellose Bluetooth-Verbindung zu Ihrem Mobiltelefon und ist mit Android 5.0 und iOS 11.0 und höher kompatibel. Schalten Sie einfach Bluetooth auf Ihrem Telefon ein, öffnen Sie die App und folgen Sie den Anweisungen. 3. Klein und leicht, passt es problemlos in Ihre Tasche oder Handtasche und ist somit sehr transportabel. Nehmen Sie es überallhin mit, um Erinnerungen sofort festzuhalten und auszudrucken. 4. Eingebauter wiederaufladbarer 1200-mAh-Akku, der nach vollständigem Aufladen lange verwendet werden kann. 5. Unterstützt mehrere Druckmodi und bietet mehrere Funktionen. Ideal zum Drucken von Schwarzweißbildern/-fotos, Memos, Einkaufslisten, Studien-/Besprechungsnotizen, Etiketten, Webseiten, QR-Codes, Aufzeichnungen usw. Geeignet für den Einsatz im Büro, zu Hause, für Studenten, Erwachsene usw. Spezifikation: 1. Papierzufuhrmethode: manuell 2. Unterstützt Netzwerkdruck: drahtlos 3. Verbrauchsmaterialtyp: Thermopapier 4. Batteriekapazität: 1200 mAh 5. Ladeschnittstelle: 5V-Micro USB 6. Auflösung: 200 dpi 7. Druckverfahren: Thermo-/Tintenlosdruck 8. Entwicklungsmodus: Schwarzweiß 9. Bluetooth-kompatibel: Bluetooth-kompatibel mit BLE4.0 10. Druckpapierspezifikationen: 57 x 26 mm x 6 m 11. Produktgröße: 85 x 85 x 45 mm Spezifikation: Paketgewicht Gewicht eines Pakets 0,25 kg / 0,54 lb Einheitspackungsgröße 16 cm * 11 cm * 5 cm / 6,3 Zoll * 4,33 Zoll * 1,97 Zoll Menge pro Karton 63 Kartongewicht 16,40 kg / 36,16 lb Kartongröße 50 cm * 35 cm * 37 cm / 19,69 Zoll * 13,78 Zoll * 14,57 Zoll Container laden 20GP: 411 Kartons * 63 Stück = 25893 Stück 40HQ: 956 Kartons * 63 Stück = 60228 Stück

Lesen Sie Mehr Weniger

1. Verwenden Sie den mitgelieferten Sender und Empfänger, um den Fernseher an einem beliebigen Ort innerhalb von 50 Metern von der Quelle aufzustellen. Schließen Sie den Sender einfach an eine Set-Top-Box, eine Spielekonsole oder ein anderes HDMI-Ausgabegerät an und schließen Sie den Empfänger dann an ein beliebiges HD-Display an. 2. HDMI-, VGA- und 3,5-mm-Buchsen können frei zugeordnet und gleichzeitig oder separat ausgegeben werden. Das übertragene Signal ist sehr klar und kann problemlos unkomprimiertes hochauflösendes Video und Audio übertragen. Das Signal weist eine extrem niedrige Latenz (Echtzeit) auf, selbst beim Streamen von 3D-Videos auf 1080p-Geräte 3. Ein echtes Plug-and-Play-Erlebnis, das innerhalb von 20 Sekunden einsatzbereit ist. Schließen Sie den Sender an die HDMI-Quelle an, dann den Empfänger an den sekundären HDTV und schon kann es losgehen. Läuft auf Standard 802.11 5 GHz. 4. Die HDMI-Schnittstelle ist hochkompatibel und kann in andere Schnittstellen umgewandelt werden. Geräte mit HDMI-Schnittstellen können direkt verwendet werden, und Geräte ohne HDMI-Schnittstellen können mit HDMI-Konvertern verwendet werden. Streamen Sie drahtlos echtes 1080p HD 3D-Video und digitales Audio auf Ihren Fernseher oder Projektor. Sehen Sie sich Filme und Fernsehsendungen auf Laptop, PC, MacBook, iPad Pro, A/V-Receiver, Spielekonsole, PS4/5, Xbox, Nintendo Switch und Kabel-/Satellitenfernsehen an. 5. 8 Sender können gleichzeitig an 1 Empfänger angeschlossen werden, Ein-Tasten-Umschaltung, keine gegenseitige Beeinflussung, gemeinsame Nutzung mehrerer Bildschirme. *Hinweis: Dieser Vorgang erfordert den Kauf zusätzlicher Sender, 1 Empfänger kann 8 Sender unterstützen (Hinweis: Der Sender kann nicht allein verwendet werden, er muss in Verbindung mit dem Empfänger verwendet werden) 6. Die Auflösung kann 4K erreichen, das Bild ist fein und verschiedene Details können klarer wiederhergestellt werden. Senden Sie problemlos kristallklares unkomprimiertes HD-Video und digitales Audio 7. Dieser tragbare drahtlose HDMI-Sender und -Empfänger ist einfach anzuschließen und nimmt nicht viel Platz ein. Er ist ideal für überfüllte Besprechungsräume und kann problemlos zwischen verschiedenen Laptops und Computern geteilt werden. 8. Der Empfänger verwendet einen HDMI+VGA-Dual-Port und nutzt die WiFi-Übertragungstechnologie. Durch die Punkt-zu-Punkt-Verbindung zwischen Sender und Empfänger können Bild-/Videokonsolen und Set-Top-Boxen von MAC, Notebook, PC, Mobiltelefon, Spielekonsolen und Set-Top-Boxen mit HDTV, Projektor oder Monitorsynchronisation verbunden werden. 9. Sender-Dekodierfähigkeit: 1080P 60Hz 10. Empfängerauflösung: 4k 30Hz 11. Senderanschluss: HD/Typ C, Empfängeranschluss: HD (V1.4)/Typ C USB/VGA/Audio 12. Senderleistung: 5 V/1 A, Empfängerleistung: 5 V/1–2 A 13. Größe: 13,5 x 10 x 2,5 cm 14. Gewicht: 160g Vollständige Informationen: 1. Drahtloses Netzwerk: IEEE 802.11ac 2,4 GHz/5 GHz 2. Auflösung: 3840 x 2160P 30fps, 1920 x 1080P 60fps, 1280 x 720P 60fps 3. Senderentfernung: 50 m (Punkt-zu-Punkt-Modus), 10 m (Drahtlosmodus) 4. Unterstützte Systeme: Android/Windows/macOS/Linux/IOS/PS5/Xbox 5. Plug and Play: Keine Software, keine Einrichtung, kein Treiber erforderlich 6. Unterstützte Protokolle: für Miracast/DLNA/Airplay 7. Unterstützt den Computer-Erweiterungsmodus 8. Unterstützt die Verbindung mehrerer Geräte Spezifikation: Paketgewicht Gewicht eines Pakets 0,35 kg / 0,78 lb Einheitspackungsgröße 16 cm * 14 cm * 4 cm / 6,3 Zoll * 5,51 Zoll * 1,57 Zoll Menge pro Karton 60 Kartongewicht 18,00 kg / 39,68 lb Kartongröße 32 cm * 42 cm * 40 cm / 12,6 Zoll * 16,54 Zoll * 15,75 Zoll Container laden 20GP: 496 Kartons * 60 Stück = 29760 Stück 40HQ: 1151 Kartons * 60 Stück = 69060 Stück

Lesen Sie Mehr Weniger