Suchergebnisse für "USB Extension"

Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Lesen Sie Mehr Weniger

Overview1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1268 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12682. Frequency band: 410.125 ~ 493.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 110mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1268 433MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 433MHz antenna x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Lesen Sie Mehr Weniger

FeaturesThe A7670E Cat-1 HAT is an LTE Cat-1 module, which supports wireless communication modes including LTE-TDD, LTE-FDD, GSM, GPRS and EDGE, with up to 10Mbps downlink rate and 5Mbps uplink rate. It supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070 series, and the AT commands is mostly compatible with SIM7600 series. It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, and so on. 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards 2. Support protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL 3. Support dial-up, telephone call, SMS 4. Support LBS base station positioning, it is able to get the approximate position info via mobile network 5. TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words 6. Onboard USB interface, for testing AT Commands, network communication, and so on 7. Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc. 8. Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Arduino/STM32 9. SIM card slot, supports 1.8V/3V SIM card 10. 2x LED indicators, easy to monitor the operating status 11. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper 12. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)SpecificationFrequency band 1. LTE Cat-1: LTE-FDD: B1, B3, B5, B7, B8, B20 2. 2G: GSM/GPRS/EDGE: 900/1800 MHz SMS and audio 1. SMS: Supported types: MT, MO, CB, Text, PDU 2. Storage: USIM card (CB could not be stored on SIM card) 3. Audio feature: Standard 3.5mm audio jack for audio input/output Others 1. Power supply: 5V 2. Operating voltage:5V / 3.3V (configured via jumper) 3. Operating temperature: -30 degree C ~ 80degree C 4. Storage temperature: -45 degree C ~ 90 degree C 5. Dimensions: 65 x 30.5mmPackage List1. A7670E Cat-1 HAT x 1 2. LTE Antenna x 1 3. USB-A to USB-C cable x 1 4. RPi screws pack x 1Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs

Lesen Sie Mehr Weniger

Anzahl der USB-Anschlüsse: Keine Markenname: ONLENY Anwendung: Wohnbereich/Allgemeiner Zweck Synchrongleichrichtungstechnologie: Nein Typ: Elektrischer Stecker Untersteuerschalter: Nein Überlastschutz: Ja Maximaler Einzel-USB-Ausgang: Keiner Länge des Verlängerungskabels: Keine Anzahl der Steckdosen: 2 Unterstützt Schnellladung: Nein Überspannungsschutz: Nein Erdung: Keine Erdung WIFI: Nein Hauptschalter: Nein Nennspannung: 100-240 V Merkmale: 1. Neues intelligentes, digitales und leistungsstarkes Stromspargerät 2. Energiequellen effizient einsparen 3. Umweltfreundlich 4. Stabilisieren Sie die Spannung 5. Stromquelle ausbalancieren 6. Geräte schützen 7. Intelligentes, schlankes Design mit LED-Leuchten zur Betriebsanzeige 8. Verlängern Sie die Lebensdauer elektrischer Geräte 9. Einfach zu bedienen, keine Wartung 10.Strom sparen heißt Geld sparen Geld sparen heißt Geld verdienen Spezifikationen: Steckerstandard: EU-Stecker, UK-Stecker Nennspannung: 90V-240V Nennfrequenz: 50 Hz – 60 Hz Nutzlast: 30000W Abmessungen: 7 x 12 x 3,5 cm (B x H x T) Farbe: Silber Wie funktioniert es Das Stromspargerät spart und reduziert Energie durch Stabilisierung der Spannung, was wiederum zu einer Reduzierung des Spitzenstrombedarfs und einer geringeren Verschwendung von wenig effizientem Strom führt. Der wenig effiziente Strom wird folglich vom Gerät gespeichert und recycelt. Im Lieferumfang enthalten: 1x Stromsparbox Spezifikation: Paketgewicht Gewicht eines Pakets 0,13 kg / 0,29 lb Einheitspackungsgröße 12 cm * 7 cm * 8,2 cm / 4,72 Zoll * 2,76 Zoll * 3,23 Zoll Menge pro Karton 140 Kartongewicht 19,42 kg / 42,81 lb Kartongröße 52 cm * 44 cm * 44 cm / 20,47 Zoll * 17,32 Zoll * 17,32 Zoll Container laden 20GP: 264 Kartons * 140 Stück = 36960 Stück 40HQ: 614 Kartons * 140 Stück = 85960 Stück

Lesen Sie Mehr Weniger

1. Shell mterial: ABS+PC2. Display voltage: 10-30V3. Dual-channel design, PD 30W + 20W fast charging (USB port compatible with SCP SuperCharge), supports simultaneous fast charging of up to five devices.4. Full protocol + PD, supports digital device charging, FM transmitter docking, MP3 playback, Bluetooth connection. Comes with a 2.4A/3A fast charging cable, 90W high-power flash charging with accurate specifications.5. Low-temperature flash charging, no overheating, low power loss, lower heat generation, and higher charging efficiency.6. LED digital display, real-time voltage monitoring, automatic power-off in case of abnormal current, ensuring device safety at all times.7. Built-in Bluetooth 5.0 chip, fast connection, wide compatibility, anti-interference, low latency, and low power consumption.8. Built-in microphone, clear calls, one-button hands-free calling, safer while driving.9. Adjustable car charger head direction for easier use and device connection.10. One-piece spring clip for greater durability and stability against bumps.11. Thickened, high-tenacity cable, resistant to pulling and wear, adjustable length, supports simultaneous charging of front and rear seats, unlimited charging distance.12. Compatible with most off-road vehicles, SUVs, trucks, sedans, sports cars, etc., with a wide 12V-24V voltage output.13. Cable extension length: 800mm14. Dimensions: 128x62.2x29mmSpecification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 16cm * 9cm * 8cm / 6.3inch * 3.54inch * 3.15inch Qty per Carton 50 Carton Weight 13.30kgs / 29.32lb Carton Size 41cm * 36cm * 33cm / 16.14inch * 14.17inch * 12.99inch Loading Container 20GP: 547 cartons * 50 pcs = 27350 pcs40HQ: 1270 cartons * 50 pcs = 63500 pcs

Lesen Sie Mehr Weniger

Ring-LED-Licht 1. Das LED-Ringlicht kann an der Halterung befestigt und überallhin mitgenommen werden. Es kann auch jederzeit vom Ständer abgenommen werden. Der Kugelkopf des Stativs ist um 360 Grad drehbar und kann frei auf jeden Winkel eingestellt werden. 2. Das Ringlicht besteht aus 2 x 48 energiesparenden LED-Perlen, hat eine ausgezeichnete Wärmeableitung, Konstantstromantrieb und hohe Farbwiedergabe, macht die Lichtquelle weicher und verbessert den Hautton bei der Porträtfotografie. 4. 3-Farben-Beleuchtungsmodus mit einstellbarer Helligkeit zur Auswahl. Sie können Farbe und Helligkeit ganz einfach anpassen. Eine hervorragende Helligkeit kann ohne die Installation zusätzlicher Farbfilter erreicht werden. Drei Farben sanften natürlichen Lichts erhellen Ihre Schönheit bei verschiedenen Gelegenheiten. 5. Die USB-Anschlüsse können mit mehreren Geräten verwendet werden, z. B. zum Anschließen eines Computer-Hosts, eines Laptops, einer mobilen Stromversorgung und eines USB-Ladegeräts. Sie können das LED-Ringlicht jederzeit kostenlos nutzen. 6. Leichtes und tragbares Design: Bequem zu verwenden und zu tragen, wenn Sie reisen oder im Freien arbeiten usw. 7. Die Telefonklemme ist für Mobiltelefone mit einer Breite von 6–8,5 cm geeignet. 8. Umfangreiche Anwendung: Es wird häufig für Fotolicht im Freien, Fülllicht im Innenbereich, Porträt-, Mode- und Werbefotografie, Videoaufnahmen usw. verwendet. 9. Wenn das LED-Ringlicht eingeschaltet ist, halten Sie die EIN/AUS-Taste gedrückt, bis die Anzeige blinkt. Wechseln Sie jetzt in den Verzögerungs-Aus-Modus, eine Minute verzögert. Ring-LED-Spezifikationen 1. Lampenperlenmodell: 2835 2. Lampenhelligkeit: 24-26lm 3. Weißlicht-Farbtemperatur: 6500K 4. Warmweiße Farbtemperatur: 3200K 5. Leistung: 0,3-9,3 W 6. Spannung: 5V 7. CRI: >90 8. Dimmbereich: 1%-100% 9. Shell-Material: ABS, Acryl-Lichtabdeckung 10. Stromversorgung: Stromversorgung über USB-Anschluss 11. Kabellänge: 2m Montieren 1. Einziehbarer ABS-Halsrahmen, Höhenverstellung von 15,5 cm bis 25 cm. 2. Verstellbare Mini-Tischhalterung für LED-Ringlicht, Schreibtisch-Schminklicht. 3. Elegantes und stilvolles Design, robust, leicht, tragbar. 4. Einfach zu tragen und zu installieren; runder Sockel, stabiler. 5. 1/4-Zoll-Standardgewindeschraube, kann an kardanischen Stabilisator oder Stativkopfadapter angeschlossen werden. Paketliste 1. Ring-LED-Licht x 1 2. Tischhalterung mit runder Basis x 1 3. Stativ-Kugelkopf x 1 4. USB-Kabel-Steuerung x 1 5. Telefonklemme x 1 6. Farbpaketbox x 1 Spezifikation: Paket enthalten Packungsinhalt 1 x LED-Ringlicht Tischhalterung mit runder Basis x 1 Stativ-Kugelkopf x 1 USB-Kabel-Steuerung x 1 Telefonklemme x 1 Farbpaketbox x 1 Paketgewicht Gewicht eines Pakets 0,84 kg / 1,84 lb Einheitspackungsgröße 35 cm * 32 cm * 8 cm / 13,78 Zoll * 12,6 Zoll * 3,15 Zoll Menge pro Karton 20 Kartongewicht 19,00 kg / 41,89 lb Kartongröße 68 cm * 62 cm * 42 cm / 26,77 Zoll * 24,41 Zoll * 16,54 Zoll Container laden 20GP: 150 Kartons * 20 Stück = 3000 Stück 40HQ: 349 Kartons * 20 Stück = 6980 Stück

Lesen Sie Mehr Weniger

Features1. Built-in Android 7.1 system, wireless WIFI Internet access. 2. Wireless connection to Android phones, iphone, IPAD, etc. 3. Built-in super battery life, strong playback for more than 2 hours. 4. Play the OFFICE document independently. 5. Support U disk plug and cast. 6. External Bluetooth speaker and cable speaker sound extension can be connected. 7. DLP display technology, the projection screen is large, and the display effect is good.Specification1. Projection Technology: DLP 2. Native Resolution: WVGA 854*480, Maximum support resolution: 1920*1080P 3. LED Luminance: 50 ANSI Lumen 4. Projection Mode: front 5. Projection Size: 30-120 inch 6. Projection Distance: 1-5m 7. Projection Ratio: 1.19:1 (37.8 inch @ 1M) 8. Aspect Ratio: 16 : 9 9. Contrast: 2000 : 1 10. Distortion: less than 1.0% 11. Luminance Uniformity: more than 85% 12. Focus Mode: manual 13. Keystone Correction: Automatic, vertical: +/- 40 degree 14. PCBA Parameters: Touch Control: yes Other Control: Button or IR/2.4G wireless remote Operation System: Android 7.1.2 (OTA Upgrade) CPU Chipset: RK3128 GPU: Mali-400MP2 GPU RAM: 1GB DDR3, ROM Flash: 16GB WIFI: 2.4G / 5G Bluetooth: 4.1 Built-in Speakers: 1 x 1w Video format: 1080P AVI, MP4, DAT, VOB etc. Audio format: MP3,WMA,3GP,WAV etc. Image format: jpg, png, bmp etc. 15. Interface: Mini HDMI IN, 1 x USB 2.0 IN, TF card slot, 1 x 3.5mm Audio OUT, Power: 1 x DC 5V IN. 16. Power Input: AC100-240V, 50/60Hz, DC5V3ASpecification: Package Weight One Package Weight 0.76kgs / 1.66lb One Package Size 19cm * 12cm * 7.5cm / 7.48inch * 4.72inch * 2.95inch Qty per Carton 30 Carton Weight 23.55kgs / 51.92lb Carton Size 44cm * 38cm * 32cm / 17.32inch * 14.96inch * 12.6inch Loading Container 20GP: 498 cartons * 30 pcs = 14940 pcs40HQ: 1157 cartons * 30 pcs = 34710 pcs

Lesen Sie Mehr Weniger

1. Product material: outside: PU / inside: knitted cotton + TPU inflatable material 2. Product weight: 745g 3. Working voltage: 5V 4. Working current: 1580mA 5. Battery capacity: 5000mAh 6. Charging current: 1200mA 7. Charging time: 3H 8. Battery life: Heating (low gear): 110Min Heating (mid-range): 50Min Heating (high-grade): 50Min 9. Multiple air columns, more ergonomic, strong lift, correct traction can solve waist problems 10. This inflatable belt applies traction to the lumbar spine, expands the intervertebral space, reduces disc pressure, eliminates inflammation, promotes blood circulation, and relieves muscle spasms 11. Two-in-one heating massage, 3 heating and 3 vibration massage modes for your choice, you can enjoy these two functions at the same time or separately, heating combined with vibration can completely relieve and relax muscles and reduce stress 12. Equipped with digital display controller, touch screen key design, panel display temperature and power, you can use the controller to control the temperature and vibration mode, the operation is simple and convenient 13. Intimate hook and loop fastener is a design that can adjust the wearing, angle and tightness at will, giving the body a good support and at the same time not compressing the nerves 14. The inflatable hand pump is light and easy to carry and easy to operate, which can prevent the user from bending over when inflating 15. Rechargeable lithium-ion battery, USB charging design, convenient and portable, allowing you to use it anytime, anywhere packing list: - Inflatable belt x 1 - Red light heating pack x 1 - Extension pad x 1 - Inflatable hand pump x 1 - Charging cable x 1 - Manual x 1 - Color box x 1Specification: Package Weight One Package Weight 1.26kgs / 2.77lb One Package Size 28cm * 21cm * 10.5cm / 11.02inch * 8.27inch * 4.13inch Qty per Carton 12 Carton Weight 16.00kgs / 35.27lb Carton Size 53cm * 45cm * 34cm / 20.87inch * 17.72inch * 13.39inch Loading Container 20GP: 328 cartons * 12 pcs = 3936 pcs40HQ: 763 cartons * 12 pcs = 9156 pcs

Lesen Sie Mehr Weniger

About The Product1. VAP11G-300 is a professional 300M WiFi repeater that is elaborately developed by HouTian Network, the original creation D/A temperature compensated auto frequency control technology (TAFC), it solved the common failing of the traditional wifi signal or wifi products that easily drop the network, make sure the lasting stability to ensure that the WiFi signal is not dropped. It is based on IEEE 802.11N standard, can extend WiFi Network range, provides the stable transmission up to 300Mbps, also is compatible with IEEE 802.11B and IEEE 802.11G standard. 2. VAP11G-300 is an environmentally and safe WiFi signal repeater. Working in the repeater mode, VAP11G-300 can be doubled to extend the original WiFi signal coverage, while it can ensure the security of the wireless signal, its working principle is: at the edges of the original WiFi hot spot signal coverage, the VAP11G-300 that in "repeater mode" is able to receive weak WiFi signal, and then zoom in to the normal, safe strength, and after optimization, error correction processing, to achieve signal coverage distance doubled extension under safe. This differs from traditional wireless signal amplifier - only amplifies the signal and ignore the wireless security. 3. In the software operation, Houtian network uphold the consistent simple, user-friendly design, abandoned the verbose of IP setup for traditional wireless repeater, using the virtual domain configuration techniques(VDNS)configuration, and also support the use of IE browser configuration and PC-specific software configuration (no IP connection), on the steps, it is even more concise, no redundant operations, which greatly facilitates the use of different levels of user.Features1. Environmental, safe, portable, mini. 2. Support 802.11b/g/n WiFi transmission protocol, 300Mbps rate of transmission. 3. Professional intelligent WiFi repeater. 4. WiFi intelligent bridge function, Wireless switch wired, wired switch wireless, intelligent switch. 5. WiFi intelligent repeater mode, it supports WiFi hot spots scan automatically and WiFi hot spot memory function. 6. Support turn off the wifi hotspot function 7. Support WEB remote firmware upgrade, can get the latest firmware free. 8. Support local WEB management, Chinese and English configuration interface. 9. It can be USB powered, easy to use mobile power supply. 10. Adopt the original creation D/A temperature compensated auto frequency control technology(TAFC),make sure the lasting stability to ensure that the WiFi signal is not dropped. 11. Original creation VDNS virtual domain configuration technology to solve the user's trouble of configuration. 12. Support connecting more than 20pcs WiFi terminal at the same time. 13. Support WPA-PSK/WPA2-PSK, 64/128/WEP security mechanism. 14. The transmission distance (without obstacle): 100m. 15. Input voltage: DC 5V-15V, Needn't extra power supply, reducing e-wasteSpecification: General Model VAP11G-300 Interface USB 2.0, RJ45, DC IN Transmission Rate 300Mbps for WiFi Wireless Security WPA2-PSK WPA-PSK 64/128 Bit WEP WPA2 WPA Antenna Types Built-in 2pcs Smart omnidirectional 2dbm Antennas Standards WiFi IEEE 802.11n WiFi IEEE 802.11g WiFi IEEE 802.11b Size 90*45*15mm Weight 90g Package Include Package Contents 1 x USB Cable 1 x Repeater Package Weight One Package Weight 0.11kgs / 0.23lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 50 Carton Weight 6.50kgs / 14.33lb Carton Size 52cm * 29cm * 21cm / 20.47inch * 11.42inch * 8.27inch Loading Container 20GP: 842 cartons * 50 pcs = 42100 pcs40HQ: 1954 cartons * 50 pcs = 97700 pcs

Lesen Sie Mehr Weniger

Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 23.30kgs / 51.37lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs40HQ: 1197 cartons * 48 pcs = 57456 pcs

Lesen Sie Mehr Weniger