Suchergebnisse für "continuity tester"

1. Start-up measurement, intelligent identification, non-contact measurement 2. Three-in-one multimeter + electric tester + phase sequence detector 3. Phase sequence induction detection: put the nibs close to the phase line ABC test points respectively, the green indicator light turns on, and the screen displays R, indicating that it is forward direction; the result, the red indicator light turns on, and the screen displays L, indicating that it is reverse direction 4. Line breakpoint detection: In the NCV non-contact voltage detection mode, check the breakpoint position along the line when the single-strand line is charged 5. Fine stainless steel watch needle: the negative input terminal is closely connected with the test lead, which is firm and durable, and is suitable for circuit maintenance and testing of various electrical appliances and small electronic components 6. In NCV mode, when a nearby AC voltage is detected, the LED indicator light will be red, and an alarm buzzer will sound, making it safer to measure electricity without contact 7. Intelligent identification of neutral and live wires: Select the function of distinguishing live neutral and live wires, insert the pen needle into the hole for identification, no need for traditional contact measurement methods, and it is safer to measure electricity 8. Portable and compact, easy to use, pen-style design 9. Detachable positive pen tip: silver-plated, anti-oxidation, not easy to break and wear, just clamp the stainless steel pen tip with pliers and rotate it out, equipped with a cap protection 10. Battery type: 2 x AAA batteries (not included in the product) 11. Screen display: HD backlit screen 12. AC/DC voltage: 600V 13. Measurement function: resistance, AC voltage, DC voltage 14. Counting: 4000 counts 15. Resistance: 40 megohms 16. Dimensions: 183.5 x 24 x 29mm 17. Weight: 57gSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 20cm * 5cm * 5cm / 7.87inch * 1.97inch * 1.97inch Qty per Carton 190 Carton Weight 19.40kgs / 42.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 190 pcs = 52630 pcs40HQ: 644 cartons * 190 pcs = 122360 pcs

Lesen Sie Mehr Weniger

1. 100 % brandneu und hochwertig. 2. Klein und leicht, einfach zu tragen. 3. Anzeigegeräte verwenden hochhelle digitale LED-Röhren mit atemberaubendem Anzeigeeffekt. 4. Mit Verpolungsschutz, Rückwärtsgang nicht verbrannt. 5. Das Voltmeter hat nur zwei Drähte, die Verdrahtung ist einfach und die Leistung zuverlässig. 6. Messbereich: Gleichstrom 2,5 – 30 V. 7. Betriebstemperatur: -10 ~ 65 Grad Celsius. 8. Das rote Kabel ist mit dem Pluspol und das schwarze Kabel mit dem Minuspol verbunden. Spezifikation: Allgemein Modell V40D Material ABS Messbereich Gleichspannung 2,5-30 V Betriebstemperatur -10 ~ 65 Grad Celsius Kabellänge 18 cm LCD Anzeige 2 x 1,4 cm Größe 40*25*20 mm Gewicht 22,5 g Paketgewicht Gewicht eines Pakets 0,04 kg / 0,09 lb Einheitspackungsgröße 7 cm * 3 cm * 2,5 cm / 2,76 Zoll * 1,18 Zoll * 0,98 Zoll Menge pro Karton 500 Kartongewicht 15,00 kg / 33,07 lb Kartongröße 37 cm * 32 cm * 27 cm / 14,57 Zoll * 12,6 Zoll * 10,63 Zoll Container laden 20GP: 834 Kartons * 500 Stück = 417000 Stück 40HQ: 1936 Kartons * 500 Stück = 968000 Stück

Lesen Sie Mehr Weniger

1. Real-time monitoring, smart chip, precision fine-tuning, reverse connection protection2. Pluggable power connector, RW1 adjustable potentiometer3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Power display, voltage display, power display, temperature display8. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61x33x14.5mm16. Weight: about 21gSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs

Lesen Sie Mehr Weniger

1. 2.7 inch VA reverse display large screen2. Intelligent automatic/manual dual mode3. Accurate detection and convenient operation4. Industrial wear-resistant silicone protective sleeve, comfortable to handle and durable5. Voltage, resistance, on-off testParameter1. Safety level: CAT III 1000V; CAT IV 600V2. Measurement function: capacitance, battery, resistance, DC current, AC current, AC voltage, DC voltage3. Automatic range, on-off buzzer test, diode test, data retention, automatic shutdown4. DC voltage range: 1000V5. AC voltage range: 750V6. DC current range: 10A7. AC current range: 10A8. Capacitance range: 100mF9. Maximum display: 999910. Battery type: 3 x AAA batteries (not included)11. Size: 16.5x8.4x2.3cm12. Net weight: 290gSpecification: General Certificate CE, FCC, EMC Package Weight One Package Weight 0.50kgs / 1.10lb One Package Size 20.5cm * 11.5cm * 6cm / 8.07inch * 4.53inch * 2.36inch Qty per Carton 40 Carton Weight 22.30kgs / 49.16lb Carton Size 43cm * 48cm * 32cm / 16.93inch * 18.9inch * 12.6inch Loading Container 20GP: 403 cartons * 40 pcs = 16120 pcs40HQ: 937 cartons * 40 pcs = 37480 pcs

Lesen Sie Mehr Weniger

1. Diamond Selector III ist ein kompaktes elektronisches Gerät zur Unterscheidung echter Diamanten von anderen simulierten Steinen. Es ist für eine schnelle, präzise und sichere Diamantprüfung konzipiert 2. Leicht und ultrakompakt (im Format einer Kreditkarte) 3. LED-Licht und Audio-Ergebnisanzeige 4. Genaues und zuverlässiges Lesen 5. Metallalarm 6. Einfache Kalibrierung für Steine ​​verschiedener Größen 7. Praktische Tragetasche 8. Prüfplattform für lose Steine 9. Prüfmöglichkeiten: Diamanten / Diamantsimulation (zB CZ) / Metall 10. Auto-Off: N/A 11. Erstes Aufwärmen: ca. 20 Sekunden 12. Anzeige: Audio- und LED-Lampen 13. Stromversorgung: 2 x AA-Batterien (nicht im Lieferumfang enthalten) 14. Größe: 84 x 53 x 14 mm 15. Gewicht: 40g Spezifikation: Paketgewicht Gewicht eines Pakets 0,09 kg / 0,21 lb Einheitspackungsgröße 15 cm * 12 cm * 2,5 cm / 5,91 Zoll * 4,72 Zoll * 0,98 Zoll Menge pro Karton 100 Kartongewicht 10,00 kg / 22,05 lb Kartongröße 24 cm * 42 cm * 24 cm / 9,45 Zoll * 16,54 Zoll * 9,45 Zoll Container laden 20GP: 1102 Kartons * 100 Stück = 110200 Stück 40HQ: 2558 Kartons * 100 Stück = 255800 Stück

Lesen Sie Mehr Weniger

Über das Produkt Als Widerstandsmessgerät für Objektoberflächen kann es den Widerstandswert auf der Objektoberfläche messen, indem es zwei parallele Elektroden nahe an die zu messende Objektoberfläche legt, um zu beurteilen, ob das gemessene Objekt ein Leiter, statisches Material oder ein Isolator ist. Gleichzeitig kann das Messgerät verwendet werden, um den Erdungswiderstand eines Objekts zu messen, was speziell auf verschiedene antistatische Felder angewendet wird. Merkmale 1. Oberflächenwiderstandsprüfung 2. Drei Modi zur gleichzeitigen Anzeige des Widerstandswerts auf der Objektoberfläche oder der Materialeigenschaft 3. Messung der Umgebungstemperatur 4. Umrechnung der Temperatureinheit 5. Datenspeicherung 6. LCD-Hintergrundbeleuchtung Spezifikation: Allgemein Messgenauigkeit des Widerstandes +-10 % Reaktionszeit der Widerstandsmessung 1 Sekunden Messbereich der Temperatur 0-50 Grad Celsius Messgenauigkeit der Temperatur +-2 Grad Celsius Messbereich 10 hoch 3-10 hoch 12 Ohm Stromversorgung 9V 6F22 Batterie Größe 125,8 mm x 63,6 mm x 31 mm Gewicht 157,6 g Paket enthalten Packungsinhalt 1 x Handbuch 1 x Batterie 1 x Widerstandsmessgerät 1 x Kabel Paketgewicht Gewicht eines Pakets 0,21 kg / 0,46 lb Einheitspackungsgröße 21 cm * 15 cm * 6,5 cm / 8,27 Zoll * 5,91 Zoll * 2,56 Zoll Menge pro Karton 20 Kartongewicht 5,60 kg / 12,35 lb Kartongröße 46 cm * 35 cm * 35 cm / 18,11 Zoll * 13,78 Zoll * 13,78 Zoll Container laden 20GP: 473 Kartons * 20 Stück = 9460 Stück 40HQ: 1098 Kartons * 20 Stück = 21960 Stück

Lesen Sie Mehr Weniger

CNBJ-707 is a quick go/no-go tester for relays that provides you with an indication of the general health and functioning of the most common Automotive relays. Tester will check for proper functioning of the relay contacts by connecting the car battery (11V--15V) to the relay coil. Tester will watch the pin configuration,the time to contacts closure and opening, consistency of the relay during each test session, Tester will light the GREEN LED if all passed during the test session,if not light theRED LED. Operating Instructions: 1. Connect the power leads to the car battery -- black alligator clip to negative terminal, red alligator clip to positive terminal. 2. Tester is powered up when the LED illuminates in RED. 3. Check the relay before plugging into the tester. If it is a 4 pin relay, select "4 pin" on the tester.If it is a 5 pin relay, select "5 pin" on the tester. 4. Plug in the relay into one of the three receptacles. 5. Press the "Test" button. 6. Tester will check the pin configuration of the unknown relay. Tester will light the RED LED if the unkonwn relay is not the same to the most of common automotive relaysor the pin of the unknown relay is destroyed. 7. Tester will open and close the relay 10 times for testing the time to contacts closure and opening if the pin configuration of the relay is right. Tester will light the RED LED immediately if the time is overtime. 8. Tester will check the consistency of the relay after testing the time to contacts closure and opening ten times. Tester will light the GREEN LED if the test passed, if not light the RED LED. 9. Disconnect power leads from the car battery and remove relay from the tester. Attention: 1. The car battery must be 12V battery, and the voltage of the battery is among 11V-15V. 2. Ideal for coil resistance above 20 ohms.Specification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 30cm * 18cm * 4cm / 11.81inch * 7.09inch * 1.57inch Qty per Carton 40 Carton Weight 10.20kgs / 22.49lb Carton Size 62cm * 37cm * 42cm / 24.41inch * 14.57inch * 16.54inch Loading Container 20GP: 276 cartons * 40 pcs = 11040 pcs40HQ: 642 cartons * 40 pcs = 25680 pcs

Lesen Sie Mehr Weniger

InstructionsThis product is a test wireless remote control frequency instrument, it can test the frequency of the remote control, can be clearly displayed;And can test the infrared induction is good or bad, lt is convenient for you to adjust the frequency you need when preparing the remote control. 1. "ON/OFF" is the power key for external frequency line test. The remote control that needs tobe tested will be emited close to this frequency meter(Placed in the test area), press the remotecontrol to open, you can test the frequency of the remote control, clearly displayed Frequencyvalue. (The effective test range is no more than 5CM. The closer the test area is, the moreaccurate the measured value will be;Car key frequency is generally divided into 320M HZ.434M HZ;868M HZ;) 2. "Lighting" is the key to turn on the front lighting; The front of the instrument is equipped withLED lighting, which is more convenient in bad light Place in use; 3. "INPUT" is an infrared input indicator. Will need to test the remote control with infrared light byclicking on it The red light shows that the infrared output of the remote control is normally emitted.lf the indicator is off. the Remote control infrared emitter failure, damage and other reasons; 4. "IR" is infrared receiving lamp;Matters Need AttentionWhen testing, some electronic signal interference sources should be avoidedsuch as: signal towers, base stations, telephone poles, sending and receivingText messages, etc.Specifications1. Model: CNBJ--501 2. Test range: 100M--1G HZ 3. Size: 150x75x30 (main part) 4. Weight: 205 grams 5. Working conditions: -10C -40 degree C 6. Relative humiditys: 80% 7. Storage conditions: -20 degree C -50 degree C 8. Relative humiditys: 85%Specification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 24cm * 15cm * 4cm / 9.45inch * 5.91inch * 1.57inch Qty per Carton 40 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 50cm * 32cm / 16.54inch * 19.69inch * 12.6inch Loading Container 20GP: 396 cartons * 40 pcs = 15840 pcs40HQ: 921 cartons * 40 pcs = 36840 pcs

Lesen Sie Mehr Weniger

1. AC detects the MAX/MIN voltage, power frequency and duty cycle of the circuit under test, while DC volts detects the voltage value of the circuit under test2. Resistance test and diode test mode: detects the resistance between the probe of the circuit under test and the auxiliary ground; while the diode test can quickly test the operation of the diode component and determine whether it is conductive3. Extra-long detection cable 6m: covers the vehicle from the front to the back, you can easily check the entire circuit system4. Current overload protection: When the current is overloaded, it will automatically disconnect the protection circuit to reduce unnecessary losses5. Multi-language options: English, German, Spanish, French, Italian, Russian, Portuguese6. Display: TFT color display (160 x 128 dpi)7. External power supply: 12 or 24V power supply is provided by the vehicle battery8. Dimensions: 28x47x1789. Weight: 1.2 kgPacking list:- V200 circuit tester- Probe tip- 20ft extension cable- Battery connection clip- Cigarette lighter adapter- User manual- BoxSpecification: Package Weight One Package Weight 1.22kgs / 2.70lb One Package Size 28cm * 25cm * 10cm / 11.02inch * 9.84inch * 3.94inch Qty per Carton 3 Carton Weight 4.80kgs / 10.58lb Carton Size 30cm * 27cm * 32cm / 11.81inch * 10.63inch * 12.6inch Loading Container 20GP: 1028 cartons * 3 pcs = 3084 pcs40HQ: 2388 cartons * 3 pcs = 7164 pcs

Lesen Sie Mehr Weniger

Features1. Bidirectional current detection, users who detect charging and discharging can easily detect bidirectional current without changing the wiring direction. 2. Power-off memory function, after power-off, it can memorize the AH number before power-off, which is convenient for observation and measurement. 3. The time and AH number reset function will not affect the next measurement. 4. The number of AH can be topped up without affecting the direct discharge measurement. 5. The voltage, current, charging capacity AH number, WH number, time and power are displayed at the same time, and the display information is comprehensive and clear. 6. With an output shutdown function key, the output can be turned on or off flexibly. 7. With overvoltage, overcurrent, overpower, time limit, overcharge and other protection functions. 8. It can be calibrated online, which is convenient for customers to correct errors in time. 9. When necessary, the liquid crystal display can be turned off to reduce the power consumption of the product.Specifications1. Voltage measurement range: - Measurement range when self-powered: 10V~90V - Measurement range when externally powered: 0~90V - Input current/output current measurement range: 0~20A 2. Display mode Color LCD display 3. Display Resolution - Voltage: 0.01V - Current: 0.01A - Capacity: 0.01AH - Time: 0.01H 4. Accuracy - Voltage: +/-1%+2 words - Current: +/-2%+5 characters 5. Measurement rate: 5 times/second 6. Protection type and setting range: - OVP (Over Voltage Protection): 0.01V~90V - OPP (Over Power Protection): 0.01W~9.99KW - LVP (under voltage protection): 0.01V~90V - OCP (Over Current Protection): 0.1~100A - OAH (Overcharged Power Protection): 0.01AH~999AH - OFT (timeout protection) : 0.01 hours~99.9 hours 7. Dimensions (L x W x H): 79 x 43 x 52(mm) 8. Mounting hole opening (mm): 76.5 x 39.2 (mm)Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 15cm * 12cm * 4cm / 5.91inch * 4.72inch * 1.57inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 36cm * 35cm / 20.47inch * 14.17inch * 13.78inch Loading Container 20GP: 407 cartons * 200 pcs = 81400 pcs40HQ: 944 cartons * 200 pcs = 188800 pcs

Lesen Sie Mehr Weniger

Features:1. Large LCD, easy-to-read 3.5-inch high-definition display.2. Durable protective shell can prevent impact, friction and collision.3. Non-contact AC voltage detection, top sensor probe design, more securely identify AC voltage.4. The high-resolution large screen can display 3 test results on the screen, including voltage, frequency, and analog bars.parameter:1. Dimensions: 143.4 x 70.9 x 15.7mm2. Display: 9999 times3. Screen: 3.5 inches4. Resolution: 0.11ohms5. S10 power supply: 1.5V (AAA) x 2 (not included)6. S11 power supply: 800 mA lithium battery7. Diode: automatically recognize the diode when it is lower than 3.0V8. DC voltage: 0.8V-620V +/-(0.5%+3), resolution: 0.001V9. AC voltage: 2.2V-620V +/-(0.5%+5), resolution: 0.001V10. Resistance: 1Ω-999.9ohms +/-(2.0%+5), 1kohms-60Mohms +/-(1.0%+3)11. V-Alert (non-contact voltage detection): buzzer alarm sound，on-site inspection: alarm buzzer, LCD screen display stripes12. Continuity: If the resistance is less than 30ohms, the buzzer will sound13. Frequency:- 1Hz-1000Hz +/-(1.0%+5) (ACV:2V-10V); resolution: 0.001Hz- 1KHz-60KHz +/-(1.0%+5) (ACV:10V-620V); resolution: 0.001HzPacking list:S10:S10 Multimeter x 1Test cable x 1Manual x1S11:S11 Multimeter x 1Test cable x 1Type-C charging cable x 1EVA cloth bag x 1Protective shell x 1Manual x1Note: The actual product is subject to the title model, the model machine of the picture is only for effect referenceSpecification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 17cm * 10cm * 4.5cm / 6.69inch * 3.94inch * 1.77inch Qty per Carton 80 Carton Weight 28.00kgs / 61.73lb Carton Size 47cm * 42cm * 35cm / 18.5inch * 16.54inch * 13.78inch Loading Container 20GP: 385 cartons * 80 pcs = 30800 pcs40HQ: 896 cartons * 80 pcs = 71680 pcs

Lesen Sie Mehr Weniger

1. Material: acrylic 2. Voltage range: 6-30V 3. Applicable models: universal 4. Waterproof rating: IP67 5. Function: time (24-hour system), voltage (6-30V), temperature (-20-70 degrees Celsius) display, time has memory function 6. Installation position: mirror holder/handle/panel fixed 7. Packing list: electronic watch x1, fixed base x1, self-tapping screw x2, cable tie x2 8. Features: switchable 3 display modes (time/voltage/temperature), exquisite and compact, easy to install, large-screen digital display, waterproof and rainproof, safe and secure, wear-resistant and durable 9. Size: about 5.7x2.9x1.95 cm, the length of the power cord is about 1.2m 10. Weight: about 55 grams Note: Due to batch reasons, the pictures are different, and they will be shipped randomly, subject to the actual product receivedSpecification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 10cm * 6cm * 3cm / 3.94inch * 2.36inch * 1.18inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs40HQ: 412 cartons * 356 pcs = 146672 pcs

Lesen Sie Mehr Weniger