Suchergebnisse für "arduino"

Features1. 128 x 128 resolution, 65K RGB colors, clear and colorful displaying effect 2. SPI interface, requires minimal IO pins 3. 4x user buttons for easy interacting 4. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 3.15V ~ 5V 2. Communication Interface: 4-wire SPI 3. Resolution: 128 x 128 pixels 4. Display color: 65K colorful 5. Communication BUS: SPI 6. Display panel: TFT 7. Display size: 25.50 x 26.50 mm 8. Pixel size: 0.20 x 0.20 mm 9. Driver: ST7735S 10. Size: 52.0 x 30.0 mmSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 5.00kgs / 11.02lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs40HQ: 2180 cartons * 200 pcs = 436000 pcs

Lesen Sie Mehr Weniger

1. 320x480 resolution, resistive touch control, 8:5 aspect ratio. 2. Supports any revision of Raspberry Pi (directly-pluggable). 3. Drivers provided (works with your own Raspbian/Ubuntu directly). 4. Size perfectly fits the Pi. 5. High quality immersion gold surface plating. 6. Support Raspbian system, enables your system to: Take photos by touching (up to 17 camera modes).Support software keyboard (system interaction without keyboard/mouse). 7. 3.5 inch RPi LCD (A) and 3.5 inch RPi LCD (B) are hardware compatible with each other (use different driver), and can be mutually substituted in most cases. (A) for low cost ver. while (B) for IPS ver. with better displayingSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 12cm * 8cm * 2cm / 4.72inch * 3.15inch * 0.79inch Qty per Carton 100 Carton Weight 10.60kgs / 23.37lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 100 pcs = 55400 pcs40HQ: 1286 cartons * 100 pcs = 128600 pcs

Lesen Sie Mehr Weniger

1. Measurement range:- 90% reflectance: S2L: 0.05–18 m; S2/S2E: 0.05–30 m; S2P: 0.05–50 m- 10% reflectivity: S2L: 0.05–8 m; S2/S2E: 0.05–10 m; S2P: 0.05–15 m2. Measurement dead zone: 0.05 m3. Sampling rate: 32,000 times/second4. Scan frequency: 10 Hz 5. Angular resolution: 0.12° 6. Distance measurement accuracy: ±30 mm 7. Distance measurement resolution: 13 mm 8. Communication interface: S2L/S2/S2P: UART serial port (1M); S2E: Ethernet UDP (10/100M) 9. Operating voltages: 5V, 12V 10. Power consumption: >2W 11. Protection rating: IP6512. Operating temperature: -10°C to 50°C 13. Application scenarios: for indoor and outdoor environments; reliable resistance to sunlight14. Size: about 77 x 38.85 mmFeatures:1. Supports multiple communication methods including serial and Ethernet ports, facilitating use in various environments2. Measurement range of 18m to 50m, meeting the needs of robotic applications in commercial settings such as hotels, restaurants, shopping malls, and office buildings3. Utilizes DTOF (Direct Time of Flight) ranging technology to ensure excellent LiDAR measurement accuracy at any distance, while effectively detecting low-reflectivity, specular, and even highly transparent objects4. Comprehensively improved internal optics and algorithm systems, with a sampling rate of up to 32,000 times per second, outputting high-quality point cloud data to capture more environmental details5. Effectively resists interference from indoor ambient light and strong outdoor light; achieves stable ranging and high-precision mapping even under strong outdoor light conditions of 80,000 lux6. The radar’s top scanning area is approximately 18 mm high, making it compact and easy to embed. This significantly reduces the height of the robot’s radar aperture without affecting the robot’s overall aesthetic design, delivering a sleek, high-tech appearance7. The interface is consistent with that of the RPLIDAR A1 radar, ensuring compatibility with existing RPLIDAR A1 LiDAR robot products8. IP65 protection rating, combined with a sealed, independent housing, provides comprehensive protection for the internal rotating mechanism, mitigates external interference, ensures a stable operating environment, and meets the requirements of industrial applications9. To ensure the product’s safety for humans and pets, a low-power infrared laser emitter is used as the light source, driven by a modulated pulse method. The laser emits only for an extremely brief duration, complying with FDA Class 1 eye safety standardsSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 10cm * 6cm / 3.94inch * 3.94inch * 2.36inch Qty per Carton 90 Carton Weight 6.40kgs / 14.11lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 90 pcs = 39420 pcs40HQ: 1018 cartons * 90 pcs = 91620 pcs

Lesen Sie Mehr Weniger

1. Main controller chip: RTL8125 2. Ethernet port type: RJ45 2.5G Ethernet port 3. PCIe interface: PCIe ×1 Gen2 4. Power supply: 5V 5. Network standards: 10/100/1000/2500 Mbps 6. Status lights: green (flashes during communication); yellow (steady when connected)7. Size: approx. 8.5 x 3.75 cmFeatures:1. Connects to the Raspberry Pi via a 16-pin ribbon cable2. Equipped with a genuine Realtek RTL8125 high-performance controller chip3. Includes a transparent acrylic support plate; features a side-mount design that does not occupy space on the top of the board4. Powered by the PCIe ribbon cable by default5. Supports for Raspberry Pi OS without drivers; plug-and-playSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 6cm * 2cm / 4.72inch * 2.36inch * 0.79inch Qty per Carton 380 Carton Weight 23.80kgs / 52.47lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 380 pcs = 156560 pcs40HQ: 958 cartons * 380 pcs = 364040 pcs

Lesen Sie Mehr Weniger

FeaturesThis is a precise centimeter level Raspberry Pi GNSS HAT based on ZED-F9P. It provides features like multi-band RTK with fast convergence times, high update rate, moving base RTK mode support, concurrent reception of 4 GNSS systems, augment positioning systems support, accurate & fast positioning with minor drifting, and outstanding ability for anti-spoofing & anti-jamming. By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi. 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. Multi-band RTK with fast convergence times, centimeter level accuracy, high update rate 3. Support Moving base RTK mode, enabling terminal precise navigation and centimeter level accuracy 4. Support concurrent receiving 4 GNSS constellations (GPS, BeiDou, Galileo and GLONASS), and still retains low power consumption 5. Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location 6. A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity 7. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing 8. Support U-Center, an easy way to config the module 9. Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts 10. 4x LEDs for indicating the module operating status 11. Come with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)Specification1. ZED-F9P: Concurrent receiving, GPS 2. Frequency band: U-blox F9 platform, GPS L1C/A L2C, SBAS, QZSS, GLONASS L1OF L2OF, BeiDou B1I B2I, Galileo E1B/C E5b 3. Navigation update rate: - PVT: 20Hz - RTK: 25Hz - RAW: 25Hz 4. RTK convergence time: Less than 30s 5. Time-To-First-Fix: - Cold starts: 29s - Hot starts: 2s - Aided starts: 2s 6. Positioning accuracy: - PVT: 1.5m CEP - RTK (horizontal and vertical): 0.01m+1ppm CEP 7. Sensitivity: - Tracking and navigatingV-167 dBm - Re-acquisitionV-160 dBm - Cold starts: -148 dBm - Hot starts: -157 dBm 8. Velocity accuracy: 0.05 m/s 9. Heading accuracy 0.3 degree 10. PPS accuracy: - RMS: 30ns - 99%: 60ns - Jamming: +/-11ns 11. PPS frequency: 0.25Hz ~ 10MHz (configurable) 12. Operational limits: Acceleration (MAX): 4g 13. Altitude (MAX): 50000m 14. Velocity (MAX): 500m/s 15. Communication interface: USB, UART (4800~921600bps, 9600bps by default), I2C (MAX 400KHz), SPI (5MHz) 16. Protocol: NMEA 0183 Version 4.10, UBX, RTCM 3.3 17. Power supply: 5V 18. Overall current: Less than 120mA at 5V (continue mode) 19. Module current: 130mA at 3V (tracking status) 20. Operating temperature: -40 degree C ~ 85 degree C 21. Dimensions: 65mm x 30.5mmPackage List1. ZED-F9P GPS-RTK HAT x 1 2. Multi-band antenna x 1 3. USB-A to Micro-B cable x 1 4. Screws pack x 1 5. 2x20PIN female header x 1Specification: Package Weight One Package Weight 0.36kgs / 0.78lb One Package Size 20cm * 16cm * 5cm / 7.87inch * 6.3inch * 1.97inch Qty per Carton 80 Carton Weight 25.00kgs / 55.12lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 80 pcs = 40000 pcs40HQ: 1162 cartons * 80 pcs = 92960 pcs

Lesen Sie Mehr Weniger

Features1. With LCD display, the current mode and parameters are clear at a glance, very clear, simple and practical. 2. Support high and low level trigger, switch control, suitable for most occasions. 3. Wide voltage power supply (6~30V) supports micro USB 5.0V power supply, which is very convenient to use. 4. Support UART data upload and parameter setting. 5. There is a key emergency stop function (STOP key), with reverse connection protection, reverse connection will not burn. 6. Added sleep mode. After enabling, if there is no operation within 5 minutes, the LCD backlight will be automatically turned off; any key will wake up. 7. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately. 8. All setting parameters are automatically saved after power off.Specification1. Working voltage: 6-30V, support micro USB 5.0V power supply 2. Trigger signal source: high level trigger (3.0V~24V), low level trigger (0.0V~0.2V), switch control (passive switch). 3. Output capability: can control equipment within DC 30v 5A or AC 220v 5A 4. Quiescent current: 15mA Working current: 50mA 5. Working temperature: -40a??85 degrees Celsius 6. With optocoupler isolation, enhance anti-interference ability, industrial-grade circuit board, set parameters will be remembered forever after power off 7. Size: 8.0x3.8x1.9cm 8. Weight: about 36gSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 10cm * 2cm / 3.94inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 42cm * 32cm / 16.54inch * 16.54inch * 12.6inch Loading Container 20GP: 472 cartons * 200 pcs = 94400 pcs40HQ: 1096 cartons * 200 pcs = 219200 pcs

Lesen Sie Mehr Weniger

1. Supports software-controlled backlight brightness2. IPS display panel, excellent display performance, 178-degree viewing angle3. Supports five-point touch; actual touch points depend on the software system4. Tempered glass panel, hardness up to 6H5. Fully laminated screen, high clarity, dustproof6. Default display is portrait mode, resolution is 720 x 1280 (HxV), landscape mode can be configured via software settings7. Supports Raspberry Pi OS, five-point touch; ESP32-P4 supports LVGL custom screen, five-point touch; RK3506 supports Buildroot, Ubuntu, etc., five-point touch; RK3576 supports Buildroot, Debian, Ubuntu, Android, etc., five-point touch8. Note: The version with a case only supports Raspberry Pi 5Standard version:1. 5-DSI-TOUCH-B touchscreen x 12. MIPI-DSI-Cable-12cm x 13. MX1.25 2PIN to 2.54 3PIN cable x 14. FFC cable 22PIN 200mm (reverse direction) x 15. FFC cable 22PIN 100mm (reverse direction) x 16. MX1.25 2PIN to MX1.25 4PIN approx. 150mm x 17. Copper pillar case x 1Casing version packaging:1. 5-DSI-TOUCH-B touchscreen x 12. Black casing x 13. MIPI-DSI-Cable-12cm x 14. MX1.25 2PIN to 2.54 3PIN cable x 15. FFC cable 22PIN 200mm (reverse direction) x 16. 7. FFC cable 22PIN 100mm (reverse direction) x 18. MX1.25 2PIN to MX1.25 4PIN approx. 150mm x 19. DSI-Cable-12cm-C x 110. Silicone button x 111. Copper pillar bag x 112. Screw bag x 1Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 17cm * 11cm * 4cm / 6.69inch * 4.33inch * 1.57inch Qty per Carton 48 Carton Weight 25.10kgs / 55.34lb Carton Size 36cm * 35cm * 34cm / 14.17inch * 13.78inch * 13.39inch Loading Container 20GP: 622 cartons * 48 pcs = 29856 pcs40HQ: 1445 cartons * 48 pcs = 69360 pcs

Lesen Sie Mehr Weniger

1. 7inch IPS screen,1024x600 hardware resolution, configurable by software (up to 1920 x1080)2. Toughened glass capacitive touch panel, 6H hardness3. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers4. When works with Raspberry Pi, supports Raspbian, Ubuntu, -WIN10 IOT, single touch, and driver free5. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.7. 3.5mm audio jack, supports HDMI audio output8. Also supports VGA input (specific cable is required and should be purchased separately)9. High quality PC case, optional tilt angle: 30?°/50?°Specification: Package Weight One Package Weight 0.43kgs / 0.95lb One Package Size 25cm * 15cm * 7cm / 9.84inch * 5.91inch * 2.76inch Qty per Carton 20 Carton Weight 8.60kgs / 18.96lb Carton Size 50cm * 30cm * 35cm / 19.69inch * 11.81inch * 13.78inch Loading Container 20GP: 507 cartons * 20 pcs = 10140 pcs40HQ: 1179 cartons * 20 pcs = 23580 pcs

Lesen Sie Mehr Weniger

1. 5-ch ITR20001/T infrared detector, high sensitivity, anti-jamming, stable performance2. High precision analog output, combined with PID control algorithm, allows the robot tracks lines more stableSpecifications1. Power: 3.3V ~ 5V2. Dimension: 78mm × 18mm3. Detector spacing: 16mm4. Mounting holes size: 3mm5. Detection range: 1cm ~ 5cmApplicationsRobot line trackingHow to UseIn the case of working with a MCU:- VCC ? 3.3V ~ 5V- GND ? GND- IR1 ? MCU.IO (ch1, analog output)- IR2 ? MCU.IO (ch2, analog output)- IR3 ? MCU.IO (ch3, analog output)- IR4 ? MCU.IO (ch4, analog output)- IR5 ? MCU.IO (ch5, analog output)Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 4cm * 2cm / 3.94inch * 1.57inch * 0.79inch Qty per Carton 1200 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1200 pcs = 332400 pcs40HQ: 644 cartons * 1200 pcs = 772800 pcs

Lesen Sie Mehr Weniger

Main Features: 1. The board uses a high-performance digital amplifier TDA8932 chip 2. Small size, high efficiency, high power, good sound quality, without additional installation of radiator 3. Suitable for the transformation of active speaker, product development, and other audio application Specification: 1. Material: PCB 2. Chipset: TDA8932 3. Operating voltage: single DC 10 - 30V ( 24V recommended voltage ) 4. Current: above 2A 5. Power output: 35W 6. Speaker impedance: 4 - 8 ohm ( 8 ohm is the best ) 7. Circuit configuration: mono BTL outputSpecification: General Types Amplifier Board Size 6.0*6.0*2.5 cm Weight 25 g Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 6cm * 2.5cm / 2.36inch * 2.36inch * 0.98inch Qty per Carton 300 Carton Weight 8.60kgs / 18.96lb Carton Size 36cm * 30cm * 25cm / 14.17inch * 11.81inch * 9.84inch Loading Container 20GP: 987 cartons * 300 pcs = 296100 pcs40HQ: 2292 cartons * 300 pcs = 687600 pcs

Lesen Sie Mehr Weniger

Type:Voltage Regulator1. Package: Step-down module2. Power: Standard3. Size: 20*11*5 mm4. Input voltage: DC 4.5-24V5. Output voltage: integrated adjustable and fixed output, fixed output voltage on the back6. Adjustable range (0.8-17V), fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V)7. Output current: maximum 3A (please pay attention to heat dissipation at full load), the actual test input 12V output within 1.5A without special treatment heat dissipation.8. Conversion efficiency: up to 97.5% (6.5 to 5V 0.7A)9. Switching frequency: 500KHz10. Output ripple: 20mV (12V to 5V3A) 20M bandwidth11. Wiring method: welding12. Input method: welding13. Output method: welding / pin header14. Welding hole spacing: 2.54 mm15. Output over voltage protection: none16. Full load temperature rise: 40 ° C17. Quiescent current: 0.85 mA18. Load adjustment rate: ±1%19. Voltage regulation rate: ±0.5%20. Dynamic response speed: 5% 200uSSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 5cm * 2cm / 3.94inch * 1.97inch * 0.79inch Qty per Carton 510 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 510 pcs = 226440 pcs40HQ: 1031 cartons * 510 pcs = 525810 pcs

Lesen Sie Mehr Weniger

1. IPS screen,1280 x 800 high resolution???Capacitive touch control, supports up to ten-points touch 2. When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free 3. When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free 4. Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images 5. Supports BB Black, comes with Angstrom image 6. HDMI interface for displaying, USB interface for touch control 7. Supports 5-level backlight adjustment 8. Note: to use the LCD with following mini-PCs, additional cables are required and should be purchasedSpecification: Package Weight One Package Weight 1.36kgs / 3.01lb One Package Size 30cm * 19cm * 5cm / 11.81inch * 7.48inch * 1.97inch Qty per Carton 80 Carton Weight 27.50kgs / 60.63lb Carton Size 35cm * 32cm * 32cm / 13.78inch * 12.6inch * 12.6inch Loading Container 20GP: 744 cartons * 80 pcs = 59520 pcs40HQ: 1727 cartons * 80 pcs = 138160 pcs

Lesen Sie Mehr Weniger