Suchergebnisse für "security dvr"

**Specification 1) Frequency range: - Up link 3G 1920-1980(MHz) - Downlink 3G 2110-2170(MHz) 2) Gain(dB): 3G 53 / 3G 58 3) Gain adjustable range: MGC≥30dB 4) Output power(dBm): ≥20 5) Pass band ripple 3G: 15dB 6) Guard band rejection 3G: (BW-58dB)≤104MHz (BW-70dB)≤107 MHz 7) I/O impedance:50C/N Connector 8) I/O return loss: ≤-10dB 9) Noise igure: ≤-8dB 10) Intermodulation att enuation (Po=13dBm): ≥40dBc 11) Transmission delay: ≤0.5us 12) Ambient temperature: -10℃～50℃ 13) Power supply: AC 110～220V±10% 45～55Hz **Characteristic Fully integrated WCDMA 3G antenna system 1) Powerful amplifier enables up to + 85 dB of signal gain including cable loss 2) Intelligent signal processing and real time adaptive operation 3) Automatically adjusts power levels as needed to ensure a consistent coverage footprint 4) Reprogrammable (in the field) enabling spectrum or carrier reconfigurations as needed 5) Auto-Trac LED diagnostics displays aid install and operation 6) Patented algorithms and adaptive processing ensure our products will not interfere with other wireless frequencies or radio devices 7) Approved by CE **The package contains: 1) 55Db 3G cellular phone signal amplifier 2) 9dB outdoor antenna 3) 3dB indoor antenna 4) Outdoor coaxial cable 10m 5) Mounting accessories 6) AC power supplySpecification: Package Weight One Package Weight 0.78kgs / 1.73lb One Package Size 28cm * 18cm * 9cm / 11.02inch * 7.09inch * 3.54inch Qty per Carton 20 Carton Weight 16.80kgs / 37.04lb Carton Size 58cm * 38cm * 47cm / 22.83inch * 14.96inch * 18.5inch Loading Container 20GP: 257 cartons * 20 pcs = 5140 pcs40HQ: 597 cartons * 20 pcs = 11940 pcs

Lesen Sie Mehr Weniger

Features1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableInstall Repeater1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar) 2. Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal 3. Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal 6. Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least 7. Indoor and outdoor antenna must be separated by wallWorking1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax) 2. After the signal is accepted by the phone amplifier, the device amplifies it 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna 4. And after that, the amplified signal transmits to the cell phoneTechnique Supporting1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range CDMA 850MHz, Uplink 824-849MHz, Downlink 869-894MHz Gain Uplink 58-62dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 1A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 140mm x 98mm x 20mm Weight 280g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual 1 x Signal Booster Package Weight One Package Weight 0.76kgs / 1.67lb One Package Size 30cm * 12cm * 10cm / 11.81inch * 4.72inch * 3.94inch Qty per Carton 10 Carton Weight 9.80kgs / 21.61lb Carton Size 52cm * 50cm * 32cm / 20.47inch * 19.69inch * 12.6inch Loading Container 20GP: 320 cartons * 10 pcs = 3200 pcs40HQ: 744 cartons * 10 pcs = 7440 pcs

Lesen Sie Mehr Weniger

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED 3G signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/ 60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.79kgs / 6.15lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Lesen Sie Mehr Weniger

1.Material: Plastic + Copper + Steel Wire. 2.Wire Diameter:10mm. 3.Alarm sound is louder than 110 decibels. 4.Power: 3 * AAA batteries. 5.High quality , easy to use.Specification: General Material Plastic, Steel, Copper Size 80cm Product Parameter Fits for Gender Unisex Package Weight One Package Weight 0.67kgs / 1.48lb One Package Size 25cm * 15cm * 6cm / 9.84inch * 5.91inch * 2.36inch Qty per Carton 20 Carton Weight 15.00kgs / 33.07lb Carton Size 50cm * 35cm * 30cm / 19.69inch * 13.78inch * 11.81inch Loading Container 20GP: 507 cartons * 20 pcs = 10140 pcs40HQ: 1179 cartons * 20 pcs = 23580 pcs

Lesen Sie Mehr Weniger

Application place of mobile phone signal amplifier: 1) Small regions signal blind or weak signal area, such as underground or semi-underground place of business, basements, underground parking, etc. 2) Small-scale hot-spot signal Complaints areas, such as conference rooms, a small supermarket, small shopping malls, the office and small public areas, etc. 3) Traffic and large social influence areas, such as bars, cafes, dance halls, cafes, fitness clubs, leisure and entertainment, etc. 4) Home, office, luxury yachts, private cars, public security system and road safety management, etc. Specifications: 1) Up-link frequency: 890-915MHz 2) Down-link frequency: 935-960MHz 3) Output Power: 10dB 4) Gain: 55 dB 5) VSWR: <1.4 6) Impedance: 50 Ohm 7) Power supply: AC 110-240V 8) Size: 198 x 109 x 25 mm 9) Coverage: 150 Square meters around 10) Indoor Antenna Length: 20cm 11) Outdoor Antenna Length: 48.5cm The package contains: 1) 60dB GSM Cellular Phone Signal Amplifier 2) 9 dB outdoor antenna 3) 2 dB indoor antenna 4) 10m cable 5) Mounting accessories: AC power supply, user manualSpecification: Package Weight One Package Weight 1.70kgs / 3.74lb One Package Size 50cm * 15.5cm * 12cm / 19.69inch * 6.1inch * 4.72inch Qty per Carton 2 Carton Weight 3.45kgs / 7.60lb Carton Size 50cm * 24cm * 20cm / 19.69inch * 9.45inch * 7.87inch Loading Container 20GP: 1111 cartons * 2 pcs = 2222 pcs40HQ: 2579 cartons * 2 pcs = 5158 pcs

Lesen Sie Mehr Weniger

Features1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableInstall Repeater1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar) 2. Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal 3. Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal 6. Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least 7. Indoor and outdoor antenna must be separated by wallWorking1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax) 2. After the signal is accepted by the phone amplifier, the device amplifies it 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna 4. And after that, the amplified signal transmits to the cell phoneTechnique Supporting1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 53-57dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 1A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 140mm x 98mm x 20mm Weight 280g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.24kgs / 2.73lb One Package Size 50cm * 17cm * 14cm / 19.69inch * 6.69inch * 5.51inch Qty per Carton 6 Carton Weight 6.79kgs / 14.96lb Carton Size 52cm * 36cm * 44cm / 20.47inch * 14.17inch * 17.32inch Loading Container 20GP: 323 cartons * 6 pcs = 1938 pcs40HQ: 751 cartons * 6 pcs = 4506 pcs

Lesen Sie Mehr Weniger

1. Material: engineering plastics, aluminum alloy2. Weight: KZ05+KL04+KD05 about 197g/set, KZ05+KL04+KD02 about 240g/set, KZ05+KL04+KD01 about 205g/set, KZ05+KL04+KD09 about 200g/set, KZ05+ KL04+KD04 is about 130g/set, KZ05+KL04+KD07 about 180g/set3. Size: KZ05 ball head diameter is about 25mm, KL04 is about 65mm long/width is about 3mm, KD01 is ball diameter is about 25mm/length is about 45mm/width is about 22mm, KD02 is ball diameter is about 25mm/fixed diameter is about 35mm, KD04 is ball diameter is about 25mm /Tray diameter is about 90mm, KD05 sphere diameter is about 25mm/length is about 50mm/width is about 27mm, KD07/KD09 sphere diameter is about 25mm/fixed diameter is about 30mm4. Applicable models: motorcycles, bicycles, electric vehicles, etc.5. Scope of application: camera adapter/compatible RAMSpecification: Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 12cm * 10cm * 4cm / 4.72inch * 3.94inch * 1.57inch Qty per Carton 128 Carton Weight 30.00kgs / 66.14lb Carton Size 60cm * 50cm * 20cm / 23.62inch * 19.69inch * 7.87inch Loading Container 20GP: 444 cartons * 128 pcs = 56832 pcs40HQ: 1031 cartons * 128 pcs = 131968 pcs

Lesen Sie Mehr Weniger

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 15-19dBm, Downlink 15-19dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 186 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.36kgs / 5.21lb One Package Size 52cm * 26cm * 15cm / 20.47inch * 10.24inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 54cm * 28cm * 32cm / 21.26inch * 11.02inch * 12.6inch Loading Container 20GP: 551 cartons * 2 pcs = 1102 pcs40HQ: 1279 cartons * 2 pcs = 2558 pcs

Lesen Sie Mehr Weniger

**Specification 1) Frequency range: -Up link GSM 890-915 -Downlink GSM 825-960 2) Gain(dB) GSM Up link: 55 3) GSM downlink: 60 4) Gain adjustable range: GSM950/ 50Db~55Db 5) Output power(dBm): ≥27 / 30 6) Pass band ripple GSM: 4dB 7) Guard band rejection: GSM(BW-60dB)≤42 MHz (BW-70dB)≤45 MHz 8) I/O impedance: 50Ω 9) I/O return loss: ≤-10dB 10) Noise coefficient: ≤5dB 11) Intermodulation attenuation (Po=13dBm): ≥40dBc 12) Transmission delay: ≤0.5us 13) Ambient temperature: -10℃～60℃ 14) Power supply: AC220V / DC 12V 45～55Hz **Characteristic 1) Fully integrated 980 MHz antenna system 2) Powerful amplifier enables up to + 85 dB of signal gain including cable loss 3) Intelligent signal processing and real time adaptive operation 4) Automatically adjusts power levels as needed to ensure a consistent coverage footprint 5) Reprogrammable (in the field) enabling spectrum or carrier reconfigurations as needed 6) Auto-track LED diagnostics displays aid install and operation 7) Patented algorithms and adaptive processing ensure our products will not interfere with other wireless frequencies or radio devices **The package contains: 1) 55dB GSM cellular phone signal amplifier 2) 9dB outdoor antenna 3) 3dB indoor antenna 4) 10m cable 5) Mounting accessories 6) AC power supplySpecification: Package Weight One Package Weight 1.25kgs / 2.75lb One Package Size 23.5cm * 15cm * 5cm / 9.25inch * 5.91inch * 1.97inch Qty per Carton 10 Carton Weight 17.40kgs / 38.36lb Carton Size 49cm * 32cm * 22cm / 19.29inch * 12.6inch * 8.66inch Loading Container 20GP: 773 cartons * 10 pcs = 7730 pcs40HQ: 1794 cartons * 10 pcs = 17940 pcs

Lesen Sie Mehr Weniger

1. Display Size: 1.4-inch touchscreen2. Screen Resolution: 240 x 2403. Screen Brightness and Refresh Rate: 800 cd/m2 ±10% maximum brightness, 60 Hz refresh rate4. Positioning System: Supports combined positioning via GPS L1, BeiDou B1, Galileo E1, QZSS L1, and GLONASS G15. Wi-Fi Video Transmission Range: Up to 25 meters (in an unobstructed, interference-free environment)6. Bluetooth Remote Control Range: Up to 10 meters7. Wireless Protocol: Wi-Fi 802.11 a/b/g/n/ac/ax (supports dual-band 2.4 GHz and 5.8 GHz)8. Battery Type: Built-in rechargeable lithium-ion battery, 320 mAh9. Operating Time: Approximately 3 to 4 hours of continuous video transmission and control10. Charging Method: Magnetic contact charging cable; charges by attaching to the contacts on the back of the remote controlInput Voltage/Current: 5 V, 1 A11. Charging Time: Takes approximately 40 to 50 minutes to fully charge12. Mounting Method: Magnetic attachment at the bottom combined with a latch13. Dimensions: 5.3 x 3.7 x 1.9 cmFeatures:1. Supports real-time viewing of smartphone screens (Android supports direct screen mirroring; iOS requires the Mimo App) or images from the multifunctional tracking module2. Within a 10-meter range, remotely control photo/video capture, switch between landscape and portrait modes, and control pan/tilt and zoom via the joystick3. Tap or select a target directly on the remote control screen to trigger ActiveTrack4. Adjust pan/tilt mode parameters directly on the remote control screen, and control the brightness and color temperature of connected lightingSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 13.00kgs / 28.66lb Carton Size 40cm * 32cm * 26cm / 15.75inch * 12.6inch * 10.24inch Loading Container 20GP: 801 cartons * 100 pcs = 80100 pcs40HQ: 1860 cartons * 100 pcs = 186000 pcs

Lesen Sie Mehr Weniger

1. Material: aluminum alloy shell 2. The wiring is made of single crystal copper, effectively preventing signal loss 3. Gain: 70dbm 4. Working frequency band: GSM 5. Rated voltage: AC 110-240V, DC 12V 6. Product size: 13.5x10.5x2.3cmSpecification: Package Weight One Package Weight 1.80kgs / 3.97lb One Package Size 50cm * 22cm * 15cm / 19.69inch * 8.66inch * 5.91inch Qty per Carton 4 Carton Weight 8.00kgs / 17.64lb Carton Size 51cm * 46cm * 32cm / 20.08inch * 18.11inch * 12.6inch Loading Container 20GP: 355 cartons * 4 pcs = 1420 pcs40HQ: 824 cartons * 4 pcs = 3296 pcs

Lesen Sie Mehr Weniger

1. Compatibility & Appearance: Designed specifically for AirPods, this protective case features a 3D geometric texture and comes in 4 colors (orange, blue, black, green). It includes a metal carabiner for easy carrying.2. Dual Locking Design: Equipped with a press-to-unlock + metal lock dual-locking structure, it effectively prevents the case from opening accidentally and the AirPods case from falling out.3. Charging Compatibility: Supports wireless/wired charging with the case on. Precisely reserved holes at the bottom (including a charging indicator hole) allow real-time monitoring of charging status.4. Hidden Stand Function: The integrated hidden movable plate at the bottom opens at 90 degrees, serving as both a dust cover and a phone stand. It supports vertical (short videos/video calls) and horizontal (office work/movie watching) modes.5. Rugged Protection: Made of drop-resistant material, it provides 360 degrees fall protection, making it more durable for daily drop scenarios.6. Portable Design: Comes with a metal carabiner, which can be easily attached to backpacks, belts, etc., for convenient outdoor carrying.Note: The product does not include the headphones.Specification: General Compatible with Apple: AirPods Pro 3 Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 11cm * 9cm * 3cm / 4.33inch * 3.54inch * 1.18inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 42cm * 30cm / 16.54inch * 16.54inch * 11.81inch Loading Container 20GP: 503 cartons * 200 pcs = 100600 pcs40HQ: 1169 cartons * 200 pcs = 233800 pcs

Lesen Sie Mehr Weniger