Elektronikmodul
-
TB6560 3A 10V-35V Stepper Motor Driver Controller Board
1. The working voltage is DC 10V-35V. It is recommended to use a switching power supply DC24V for power supply.2. Using 6N137 high-speed optical coupling to ensure high speed without losing step.3. Using Toshiba TB6560AHQ chip, there are built-in low-voltage shutdown, overheating shutdown and overcurrent protection circuits to ensure performance.4. The rated output (max) is: +/-3A, with a vertex value of 3.5A.5. It is suitable for two-phase/four-phase/four-wire/six-wire stepping motor with 42,57 stepping within 3A, but not suitable for stepping motor with more than 3A.6. Automatic half-flow function.7. Subdivision: Full step, half step, 1/8 step, 1/16 step, maximum 16 subdivision.8. Dimensions: Width 50 x length 75 x height 35 (MM)9. Weight: 83G10. This module does not have any protection circuit, so you must be very careful when using it, otherwise the chip is easy to burn out.Features in similar products:1. The current level can be adjusted step by step to meet your multiple application requirements.2. Automatic half flow is adjustable.3. Using 6N137 high-speed optical coupling to ensure high speed without losing step.4. The board printing instructions can be operated without manual.5. Adopt thick and densely toothed radiator for good heat dissipation.Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 25cm * 15cm * 3cm / 9.84inch * 5.91inch * 1.18inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 100 pcs = 50000 pcs40HQ: 1162 cartons * 100 pcs = 116200 pcs
£3.99
-
WAVESHARE WAVESHARE 2.4GHz Wi-Fi Mini Development Board Based ESP32-S3 Dual-Core Processor, No Pin Header, Soldered Pin Header
1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)3. Built-in 512KB SRAM and 384KB ROM, stacked with 4MB Flash and 2MB PSRAM or 8MB Flash and 8MB PSRAM4. Features a stamp-hole design and onboard ceramic antenna for easy integration into user-designed baseboards5. Supports flexible clock and individual module power settings for low-power modes in various scenarios6. Integrated USB serial port full-speed controller with 24 GPIOs for flexible peripheral configuration7. Features 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, and 2 x ADC peripherals8. Supports MicroPython, ESP-IDF, and Arduino9. Compact size, using a half-hole design for easy integration with other motherboards.10. Multiple low-power operating modes meet the power consumption requirements of Internet of Things (IoT), mobile devices, wearable electronic devices, smart home applications, etc.11. Press and hold the BOOT (GPIO0) button before connecting the Type-C cable each time firmware is downloaded.12. When powered by an external power source, input 3.7V~6V power at the half-hole marked with 5V.13. Dimensions: 18x23.5mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 14.30kgs / 31.53lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs40HQ: 1040 cartons * 264 pcs = 274560 pcs
£5.99 - £8.99
-
Waveshare Waveshare Industrial Grade Serial Server RS232/485 to WiFi / Ethernet, RJ45 Network Port, RJ45 Network Port with POE Support
Features:1. RS232/485 device data collector/IoT gateway specially designed for industrial environments.2. Integrate multiple functions into one, including serial port server, Modbus gateway, MQTT gateway, serial port to HTTPD client, etc.3. The module has RS232, RS485, WIFI, and Ethernet interfaces, which can realize serial to WIFI, serial to WIFI and other functions; Ethernet, Ethernet to WIFI, etc.4. Multiple onboard power interfaces support a wide range of 6~36V power supply, and can be equipped with PoE function.5. Industrial-grade metal shell design supports wall-mounted and rail-mounted installation. It is small in size and easy to install.6. Suitable for data collection, IoT gateway, security IoT, smart instrument monitoring and other applications.Product parameters:1. Frequency band: 2.412-2.484 GHz2. Wireless network: Station / AP / AP+Station mode3. Security mechanism: WPA-PSK / WPA2-PSK4. Encryption type: TKIP/AES5. Transmission power:802.11b: +19dBm (max @11Mbps)802.11g: +18dBm (max @54Mbps)802.11n: +17dBm (maximum @HT20, MCS7); +17dBm (maximum @HT40, MCS7)6. Receiving sensitivity:802.11b: -89dBm (@11Mbps)802.11g: -81dBm (@54Mbps)802.11n: -73dBm (@HT20, MCS7); -71dBm (@HT40, MCS7)7. Baud rate: 300-460800 bps8. Check digit: none, odd, even, mark, space9. Data bits: 5-9 bits10. Flow control: RTS/CTS N/A11. Protocol: TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP/MQTT12. Configuration: host, browser, serial AT command13. Communication method: TCP/IP direct communication, VCOM14. Working mode: transparent transmission, serial port command, HTTPD Client, Modbus TCP to Modbus RTU15. Working temperature: minus 40 degrees Celsius - 85 degrees Celsius16. Humidity range: 5%-95% relative humidity17. Product size: 85 x 84 x 24mm18. Weight: 157g, 169gPacking list:RJ45 network port:-RS232/485 to WIFI Ethernet (B) x1-2.4G WiFi antenna x1-Rail mounting buckle x1-Screwdriver x1-Screw pack x1RJ45 network port supporting POE:-RS232/485 to WIFI POE ETH (B) x1-2.4G WiFi antenna x1-Rail mounting buckle x1-Screwdriver x1-Screw pack x1Specification: Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 18cm * 14cm * 4cm / 7.09inch * 5.51inch * 1.57inch Qty per Carton 32 Carton Weight 7.50kgs / 16.53lb Carton Size 38cm * 30cm * 34cm / 14.96inch * 11.81inch * 13.39inch Loading Container 20GP: 687 cartons * 32 pcs = 21984 pcs40HQ: 1597 cartons * 32 pcs = 51104 pcs
£26.99 - £29.99
-
Waveshare Waveshare IMX219-160 160 Degree FOV IMX219 Camera, Applicable for Jetson Nano
Features1. Supports NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Resolution: 3280 × 24645. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.35- Focal Length: 3.15mm- Angle of View (diagonal): 160 degree- Distortion: <14.3%6. 4 screw holes7. Used for attachment8. Provides 3.3V power output9. Dimension: 25mm × 24mm10. Weight: 15gPacking List:1. IMX219-160 Camera x12. 15-pin FFC (opposite sides contact) x1Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 10cm * 5cm * 2cm / 3.94inch * 1.97inch * 0.79inch Qty per Carton 960 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 960 pcs = 265920 pcs40HQ: 644 cartons * 960 pcs = 618240 pcs
£16.99
-
Waveshare Waveshare Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless, 15823
Overview1. This is a universal driver board for e-Paper raw panels, thanks to the dual wireless features - WiFi & Bluetooth - it is easy to display images from PC / smart phone via WiFi or Bluetooth.2. Furthermore, it can also be used for Arduino development, just like any other normal Arduino board.Features1. Onboard ESP32, supports Arduino development2. Provide Android APP, allows to refresh display content via Bluetooth EDR3. Provide HTML host code, allows to refresh display content via remote webpage, suit for Internet applications4. Support Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image5. Support popular image formats: BMP, JPEG, GIF, PNG, etc.6. Easy to be integrated into wireless applications7. Come with e-Paper driver (open source)8. Come with development resources and manualSpecifications1. WiFi protocol: 802.11b/g/n2. Bluetooth protocol: 4.2, includes traditional BR/EDR, and low power BLE3. Interface: 3-wire SPI, 4-wire SPI (default)4. Operating voltage: 5V5. Operating current: 50mA ~ 150mA6. Outline dimension: 29.46mm x 48.25mmPackage Contents1. e-Paper ESP32 Driver Board x12. e-Paper Adapter x13. 24PIN FFC x1Note: e-Paper panels in the photos are NOT included.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 720 pcs = 221760 pcs40HQ: 716 cartons * 720 pcs = 515520 pcs
£10.99
-
Waveshare Waveshare 2.13 inch 212x104 Pixel Three-color E-Ink Display HAT (B) for Raspberry Pi, 13448
Overview1. This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.2. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features1. No backlight, keeps displaying last content for a long time even when power down2. Ultra low power consumption, basically power is only required for refreshing3. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+4. Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.5. Onboard voltage translator, compatible with 3.3V/5V MCUs6. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)Specifications1. Operating voltage: 3.3V/5V2. Interface: 3-wire SPI, 4-wire SPI3. Outline dimension: 65mm x 30.2mm4. Display size: 23.71mm x 48.55mm5. Dot pitch: 0.229 x 0.2286. Resolution: 212 x 1047. Display color: red, black, white8. Grey level: 29. Full refresh time: 15s10. Refresh power: 26.4mW(typ.)11. Standby power: <0.017mW12. Viewing angle: >170 degreePackage Contents1. 2.13 inch e-Paper HAT (B) x12. RPi screws pack (2pcs) x13. PH2.0 20cm 8 Pin x1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 6cm * 2cm / 3.15inch * 2.36inch * 0.79inch Qty per Carton 840 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 36cm * 40cm / 22.05inch * 14.17inch * 15.75inch Loading Container 20GP: 330 cartons * 840 pcs = 277200 pcs40HQ: 767 cartons * 840 pcs = 644280 pcs
£11.99
-
Waveshare Waveshare General 1.5 inch 128x128 16-bit High Color RGB OLED Display Module, 14747
1.5 inch RGB OLED display module, 128x128 pixels, 16-bit high color, SPI interfaceOverviewThis is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.Features1. 128x128 high resolution, 65K colors, clearly displays colorful images2. Support 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor3. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Driver: SSD13512. Interface: 4-wire SPI, 3-wire SPI3. Display color: RGB, 65K colors4. Resolution: 128x1285. Viewing angle: >160 degree6. Operating voltage: 3.3V / 5V7. Dimension: 44.5 x 37 (mm)Package Contents1. 1.5 inch RGB OLED Module x12. PH2.0 7Pin x1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs
£14.99
-
Waveshare Waveshare RS485 CAN Shield, RS485 CAN Shield Designed for NUCLEO/XNUCLEO
OverviewThe RS485 CAN Shield will easily enable RS485/CAN communication functions for your NUCLEO/XNUCLEO Arduino boards.Features1. Arduino standard interfaces, compatible with Arduino boards like Arduino UNO, Leonardo, NUCLEO, XNUCLEO- When using with Arduino UNO, Leonardo, the CAN function is unavailable due to hardware limitation2. RS485 function, onboard transceiver SP3485/MAX3485, 3.3V power supply3. CAN function, onboard transceiver SN65HVD230, 3.3V power supplySpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 6cm * 2cm / 2.76inch * 2.36inch * 0.79inch Qty per Carton 960 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 36cm * 40cm / 22.05inch * 14.17inch * 15.75inch Loading Container 20GP: 330 cartons * 960 pcs = 316800 pcs40HQ: 767 cartons * 960 pcs = 736320 pcs
£7.99
-
Waveshare Photo Interrupter Sensor, Speed Measuring
Overview1. Infrared detection, eliminating the interferences of external stray light2. Schmitt trigger, stable wave form and signals3. Signal output indicator (while breaking the beam, outputs low level, the indicator lights up)Specifications1. Power: 3.3V ~ 5V2. Dimension: 26.8mm × 15mm × 18.7mm3. Mounting holes size: 3mm4. Gap width: 6mmApplications- Motor speed detection- Pulse counterHow to UseIn the case of working with a MCU:- VCC ? 3.3V ~ 5V- GND ? GND- DOUT ? MCU.IO (digital output)Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 4cm * 4cm / 2.36inch * 1.57inch * 1.57inch Qty per Carton 1000 Carton Weight 10.00kgs / 22.05lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1000 pcs = 277000 pcs40HQ: 644 cartons * 1000 pcs = 644000 pcs
£2.99
-
Waveshare Waveshare 4-DOF Metal Robot Arm Kit for micro:bit, Support Bluetooth, US Plug
Overview1. Equip your micro:bit with this 4-DOF metal robot arm, and get started to explore the world of artificial intelligent robotic.2. This starter robotic arm kit includes: servo driver board, metal mechanical arm structure, and 4x metal gear servos. When used with the micro:bit, it is easy to control the arm by smart phone through Bluetooth connection.The Servo DriverAdopts Servo Driver for micro:bit:1. Micro:bit edge connector, directly pluggable2. I2C controlled, using only 2 pins3. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)4. Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal5. Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.6. Reserved I2C control pins, allows to work with other control boards7. Comes with development resources and manual (micro:bit graphical examples like Bluetooth/2.4G wir eless remote control)The Robot Arm Structure1. 4-DOF, large solid base, metal mechanical grasper2. Full aluminium alloy body, sandblasting oxidation surface, strong & durable3. Clever mechanical structure and mounting design, agile to control, easy to build3. Fitted with 4x metal gear servos (1x MG996R, 3x MG90S), large torque force, smooth movingPackage IncludeNote: micro:bit is NOT included.1. Metal arm parts x12. MG996R Servo x13. MG90S Servo x34. MG996R servo wheel x15. Servo Driver for micro:bit x16. Power adapter US plug 5V 3A Micro x17. Servo extension wire 150mm x18. Screws pack x19. Screwdrivers 2PCS x1Specification: Package Weight One Package Weight 0.55kgs / 1.21lb One Package Size 25cm * 15cm * 8cm / 9.84inch * 5.91inch * 3.15inch Qty per Carton 20 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 30cm * 40cm / 19.69inch * 11.81inch * 15.75inch Loading Container 20GP: 444 cartons * 20 pcs = 8880 pcs40HQ: 1031 cartons * 20 pcs = 20620 pcs
£41.99
-
Waveshare Nano Base Board A for Raspberry Pi CM4, Nano Base Board A
1. Base board for Compute Module 4 Lite / eMMC 2. Standard CM4 socket, with multiple peripheral interfaces, suitable for narrow application environment Specifications: 1. CM4 socket: Suitable for all variants of Compute Module 4 2. Connector: Raspberry Pi 40PIN GPIO interface x 1 3. USB: USB 2.0 Type A interface x 1 4. Camera: MIPI CSI-2 port x 1 (15pin 1.0mm FPC connector) 5. Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants 6. Power: 5V 7. Size: 55 x 40mm Package list 1. CM4-NANO-A x1 2. 2 x 20PIN color-coded straight pinheader x 2Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 300 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 300 pcs = 186000 pcs40HQ: 1439 cartons * 300 pcs = 431700 pcs
£11.99
-
WAVESHARE Waveshare Core1262-868M Anti-Interference SX1262 LoRa Module, EU868 Band
About The ProductThe Core1262-868M is a LoRa core module which incorporates new-generation SX1262 chip. It has featuress including mini size, long range transmission, high anti-interference capability, and so on. The module uses EU868 band, combined with LoRa gateway, it can be connected to servers like TTN server to build LoRa network. 1. New-generation SX1262, higher power efficiency and longer transmission distance than the traditional SX1278 2. EU868 band, combined with LoRa gateway, quick connection to cloud servers like TTN server 3. Comes with rich development resources and manual (examples for STM32, Raspberry Pi Pico)Specifications1. RF chip: SX1262 2. Frequency range: EU868 (863~870MHz) 3. Modulation: LoRa/(G)FSK 4. Data rate: 0.018~62.5Kbps (LoRa), 0.6~300Kbps ((G)FSK) 5. Emit power: More than 14dBm 3.3V 6. Spreadind factor: SF5 ~ SF12 7. Operating voltage: 3.3V 8. Module power consumption: Emitting current: 45mA 14dBm; receiving current: 5.3mA 125KHz 9. Communication bus: SPI 10. Operating temperature: -40 ~ 85 degree C 11. Connector: Castellated edge / solder holes 12. Dimensions: 21.00 x 52.00mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 1000 pcs = 328000 pcs40HQ: 763 cartons * 1000 pcs = 763000 pcs
£7.99
-
WAVESHARE Waveshare RP2040-Plus Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader, RP2040-Plus with Pinheader
Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now. As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins. What is different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 4MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Lithium battery recharge/discharge header, suitable for mobile devices 6. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 7. Castellated module allows soldering direct to carrier boards 8. USB 1.1 with device and host support 9. Low-power sleep and dormant modes 10. Drag-and-drop programming using mass storage over USB 11. 26 x multi-function GPIO pins 12. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 13. Accurate clock and timer on-chip 14. Temperature sensor 15. Accelerated floating-point libraries on-chip 16. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs40HQ: 763 cartons * 500 pcs = 381500 pcs
£6.99
-
WAVESHARE Waveshare Metal Case Gigabit PoE Splitter, 5V 2.5A Type-C Out
Features1. Incorporates original chip Si3404, high-efficiency, high-safety, stable-performance 2. 10/100/1000Mbps auto-negotiation Ethernet port 3. 802.3af/at-compliant PoE (Power over Ethernet) standard 4. Isolated SMPS (Switching Mode Power Supply), effectively protecting the powered device 5. 5V DC output, suitable for powering Raspberry Pi and other small-scale network devices 6. Black dull-polish metal case, sturdy and rugged, higher protection level, better heat dissipationSpecifications1. Power Supply: Support 1/2(+); 3/6(-); 4/5(+); 7/8(-) powering 2. POE input voltage: 37V ~ 57V 3. Type-C output: 5V 2.5A (MAX) 4. Cable: Cat-5 UTP 5. Standard: IEEE 802.3 af/at PoE Ethernet 6. Data rate: 10/100/1000Mbps 7. LED indicator: PoE power input indicator 8. Size: 86 x 30 x 25mm (l x w x h) 9. Operation temperature: -40 degree C ~ 85 degree CSpecification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 10.00kgs / 22.05lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 100 pcs = 56600 pcs40HQ: 1314 cartons * 100 pcs = 131400 pcs
£13.99
-
WAVESHARE Waveshare Mini Base Board A for Raspberry Pi Compute Module 4, Base Board A For Raspberry Pi CM4
1. USB: - USB 2.0 x 2 - USB 2.0 x 2 (via FFC connector) 2. GPIO: Raspberry Pi 40 PIN GPIO x 1 3. Header: M.2 slot x 1 4. HD media interface: HDMI x 2, 1x via FFC connector, support 4K 30fps output 5. DSI display: MIPI DSI x 1 (15pin 1.0mm FPC) 6. CSI camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC) 7. Power input: 5V 8. FAN: 5V / 12V (no fan control) 9. RJ45 Ethernet: Gigabit Ethernet 10. CM4 slot: Suitable for all variants of Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 12. Size: 85.0 x 56.0mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 12.60kgs / 27.78lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£15.99
-
WAVESHARE Waveshare 2.8 inch 480x640 HDMI IPS LCD Display (H) Fully Laminated Screen
Compatible ModelsFor Raspberry Pi 1. Support Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT / Retropie 2. Driver free for USB-C touch 3. Config file is required for I2C touch 4. Supports all versions of Raspberry Pi For Jetson Nano 1. Support Ubuntu 2. PC 3. Support Windows 11 / 10 / 8.1 / 8 / 7 4. For Jetson Nano and PC, only USB-C touch is availablePackage List1. 2.8 inch HDMI LCD (H) x 1 2. HDMI Adapter (C) x 1 3. HDMI Adapter (B) x 1 4. HDMI cable x 1 5. USB-A to USB-C cable x 1 6. Screws pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 20cm * 12cm * 5cm / 7.87inch * 4.72inch * 1.97inch Qty per Carton 72 Carton Weight 13.00kgs / 28.66lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 72 pcs = 22176 pcs40HQ: 716 cartons * 72 pcs = 51552 pcs
£36.99
-
Waveshare Waveshare Solar Panel (6V 5W), 16158
Specifications1.Solar cell type: 156 monocrystalline cell2.Surface: toughened glass3.Frame material: anodic oxidation aluminum alloy4.Back board material: 0.25mm PET5.Power: 5.0W ± 5%6.Operating voltage: 6.0V ± 5%7.Operating current: 833mA ± 5% (max)8.Open circuit voltage: 7.2V ± 5%9.Short circuit current: 916mA ± 5%10.For use with: Solar Power ManagerNote: specifications above are tested on standard condition: 1000W/m2 radiation intensity, 25℃, AM1.5 air quality.Specification: Package Weight One Package Weight 0.73kgs / 1.61lb One Package Size 25cm * 21cm * 4cm / 9.84inch * 8.27inch * 1.57inch Qty per Carton 25 Carton Weight 18.30kgs / 40.34lb Carton Size 61cm * 50cm * 40cm / 24.02inch * 19.69inch * 15.75inch Loading Container 20GP: 218 cartons * 25 pcs = 5450 pcs40HQ: 507 cartons * 25 pcs = 12675 pcs
£9.99
-
2 PCS HW-602 USB Fan Governor Wind Speed Controller Air Volume Regulator Cooling Mute Multifunction Noise Reduction Switch Module
1. Input voltage: DC4~12V2. Output voltage: DC2.5~8V3. Output power: 5W (do not use it with overload)4. Function description: suitable for common 5.0V USB fans on the market5. How to use: Plug the male head of the governor into a mobile phone charger, power bank, computer USB, etc., and then insert the fan plug into the female head of the governor to use6. Adjustment method: knob adjustment (clockwise increase, counterclockwise decrease)7. Features: strong wind and weak wind can be adjusted at will, fan stepless speed regulation, wide voltage input compatible with multi-speed power supply.8. The module is a speed-regulating fan module designed according to the principle of high-frequency switching power supply. The essence is to control the speed of the fan by adjusting the output voltage.9. Matters needing attention: When used to adjust the fan in two gears, please set the fan to the first gear, otherwise the speed may not be adjusted.10. Size: 50x18mmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 6cm * 3cm / 3.94inch * 2.36inch * 1.18inch Qty per Carton 300 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 300 pcs = 186000 pcs40HQ: 1439 cartons * 300 pcs = 431700 pcs
£2.99 £1.99
-
Waveshare Waveshare Solarstrom-Managementmodul für 6V~24V Solarpanel, 16120
Überblick Dieses Solarstrommanagementmodul ist für 6 V bis 24 V Solarpanel ausgelegt. Es kann die 3,7 V Lithiumbatterie über das Solarpanel oder eine USB-Verbindung aufladen und bietet einen geregelten Ausgang von 5 V/1 A. Das Modul verfügt über die MPPT-Funktion (Maximum Power Point Tracking) und mehrere Schutzschaltungen, sodass es weiterhin mit hoher Effizienz, Stabilität und Sicherheit arbeiten kann. Es eignet sich für solarbetriebene, stromsparende IoT- und andere Umweltschutzprojekte. Merkmale 1. Unterstützt die MPPT-Funktion (Maximum Power Point Tracking) und maximiert so die Effizienz des Solarpanels 2. Unterstützt das Laden des Akkus über Solarpanel/USB-Anschluss 3. Für 6V~24V Solarpanel, DC-002-Buchseneingang oder Schraubklemmeneingang 4. Onboard MPPT SET-Schalter, wählen Sie den Pegel nahe dem Eingangspegel, um die Ladeeffizienz zu verbessern 5. Zwei 5V-Ausgangsschnittstellen: Pinheader und USB-Anschluss 6. Integrierter Aluminium-Elektrolytkondensator mit hoher Kapazität und SMD-Keramikkondensator zur Reduzierung der Welligkeit und für stabile Leistung 7. 14500 Batteriehalter und PH2.0 Batterieanschluss, zum Anschluss mehrerer Arten von 3,7 V Li-Batterien 8. Mehrere LED-Anzeigen zur Überwachung des Status von Solarpanel und Batterie 9. Mehrere Schutzschaltungen: Überladung / Überentladung / Rückwärtsschutz / Überhitzung / Überstrom, stabil und sicher zu verwenden Technische Daten 1. Solarmodul-Eingangsspannung (SOLAR IN): 6 V ~ 24 V 2. Micro-USB-Eingangsspannung (USB IN): 5 V 3. Pinheader / USB-Ausgang (USB OUT): 5V 1A 4. Ladeschlussspannung: 4,2 V +/- 1 % 5. Überentladungsschutzspannung: 2,9 V +/- 1 % 6. Ladeeffizienz des Solarmoduls: ~78 % 7. USB-Ladeeffizienz: ~82 % 8. 3,7-V-Batterie-Boost-Ausgangseffizienz: ~86 % 9. Maximaler Ruhestrom: <2 mA 10. Betriebstemperatur: -40 ~ 85 °C 11. Abmessungen: 65,2 mm x 56,2 mm x 22,9 mm Spezifikation: Paketgewicht Gewicht eines Pakets 0,06 kg / 0,12 lb Einheitspackungsgröße 8 cm * 8 cm * 2 cm / 3,15 Zoll * 3,15 Zoll * 0,79 Zoll Menge pro Karton 500 Kartongewicht 24,50 kg / 54,01 lb Kartongröße 40 cm * 40 cm * 40 cm / 15,75 Zoll * 15,75 Zoll * 15,75 Zoll Container laden 20GP: 416 Kartons * 500 Stück = 208000 Stück 40HQ: 967 Kartons * 500 Stück = 483500 Stück
£6.99
-
WAVESHARE Waveshare Din Rail RS485 auf RJ45 Serieller Server mit POE-Funktion
1. Stromversorgung: 9-24V 2. Kommunikationsschnittstelle: RS485-Anschluss x 1, Ethernet-Anschluss x 1 3. Baudrate: 300-115200 bps 4. Datenbits: 5-9 Bit 5. Konfiguration: Host, Webbrowser, Geräteverwaltungsfunktionsbibliothek 6. Kommunikationsmethode: TCP/IP-Direktkommunikation, VCOM 7. Arbeitstemperatur: -40 Grad bis 85 Grad 8. Hauptfunktion: Bidirektionale transparente Datenübertragung zwischen RS485 und Ethernet 9. Es ist einfach, auf mehreren Schienen installierte serielle Server miteinander zu kombinieren, mehr Freiheit. 10. Es ist für Modbus-Netz-Upgrades geeignet und kann in Verbindung mit 3D-Konfigurationssoftware verwendet werden. 11. Unterstützt TCP-Server / TCP-Client / UDP-Modus / UDP-Multicast. 12. Unterstützung für Multi-Host-Rolling-Polling, einfache Cloud-Kommunikation und Geräteidentifizierung. Spezifikation: Paketgewicht Gewicht eines Pakets 0,14 kg / 0,30 lb Einheitspackungsgröße 12 cm * 8 cm * 6 cm / 4,72 Zoll * 3,15 Zoll * 2,36 Zoll Menge pro Karton 100 Kartongewicht 16,00 kg / 35,27 lb Kartongröße 50 cm * 42 cm * 32 cm / 19,69 Zoll * 16,54 Zoll * 12,6 Zoll Container laden 20GP: 396 Kartons * 100 Stück = 39600 Stück 40HQ: 921 Kartons * 100 Stück = 92100 Stück
£18.99
-
WAVESHARE Waveshare Solar Power Manager, eingebetteter 10000 mAh Li-Po-Akku, unterstützt 6 V ~ 24 V Solarmodule, 19799
Merkmale Der Solar Power Manager (B) ist mit herkömmlichen 6V~24V-Solarmodulen kompatibel. Er kann den wiederaufladbaren 3,7V-Li-Po-Akku über das Solarmodul oder eine USB-Typ-C-Verbindung aufladen und bietet einen geregelten 5V/3A-Ausgang (mit Unterstützung mehrerer Protokolle, einschließlich PD/QC/FCP/PE/SFCP). Das Modul verfügt über die MPPT-Funktion (Maximum Power Point Tracking) und mehrere Schutzschaltungen, sodass es mit hoher Effizienz, Stabilität und Sicherheit betrieben werden kann. Es eignet sich für solarbetriebene, stromsparende IoT- und andere Umweltschutzprojekte. 1. Unterstützt die MPPT-Funktion (Maximum Power Point Tracking) und maximiert so die Effizienz des Solarpanels 2. Flexibles Aufladen des Akkus: über Solarpanel oder USB TYPE-C-Netzteil 3. Kompatibel mit 6 V ~ 24 V Solarmodulen, DC-002-Buchseneingang oder Schraubklemmeneingang 4. Integrierter MPPT SET-Schalter, wählen Sie den Pegel nahe dem Eingangspegel, um die Ladeeffizienz zu verbessern 5. Integrierter Aluminium-Elektrolytkondensator und SMD-Keramikkondensator, Reduzierung der Welligkeit, stabile Leistung 6. PH2.0-Batterieanschluss mit eingebettetem wiederaufladbarem Li-Po-Akku mit 10000 mAh und 3,7 V 7. Mehrere LED-Anzeigen zur Überwachung des Status von Solarpanel und Batterie 8. Mehrere Schutzschaltungen: Überladung / Überentladung / Rückwärtsschutz / Überhitzung / Überstrom, stabil und sicher zu verwenden Spezifikation: Paketgewicht Gewicht eines Pakets 0,35 kg / 0,77 lb Einheitspackungsgröße 20 cm * 15 cm * 5 cm / 7,87 Zoll * 5,91 Zoll * 1,97 Zoll Menge pro Karton 40 Kartongewicht 13,00 kg / 28,66 lb Kartongröße 42 cm * 32 cm * 27 cm / 16,54 Zoll * 12,6 Zoll * 10,63 Zoll Container laden 20GP: 734 Kartons * 40 Stück = 29360 Stück 40HQ: 1705 Kartons * 40 Stück = 68200 Stück
£19.99
-
WAVESHARE Waveshare Solarstrommanager (C)
Sicherheitshinweise 1. Li-Ionen- und Li-Po-Akkus sind sehr instabil. Sie können Feuer, Verletzungen oder Sachschäden verursachen, wenn sie nicht richtig aufgeladen oder verwendet werden. 2. Vertauschen Sie die Polaritäten beim Laden oder Entladen der Batterie nicht. Verwenden Sie zum Aufladen der Batterie kein minderwertiges Ladegerät/Ladepanel. 3. Verwenden Sie alte Batterien nicht zusammen mit neuen und vermeiden Sie die Verwendung von Batterien verschiedener Marken. 4. Achten Sie beim Kauf einer Lithiumbatterie darauf, dass die Batteriespezifikation mit der Erweiterungskarte kompatibel ist. Wählen Sie Batterien vom offiziellen Hersteller und stellen Sie durch Alterungstests sicher, dass die Batterien stabil und sicher funktionieren. 5. Lithiumbatterien haben eine begrenzte Lebensdauer und werden mit der Zeit schwächer. Sie sollten durch neue ersetzt werden, wenn die Batterien ihre maximale Lebensdauer erreicht haben oder länger als zwei Jahre funktionieren, je nachdem, was zuerst eintritt. 6. Sollte sorgfältig und richtig platziert werden, halten Sie es von brennbaren und explosiven Gegenständen fern und bewahren Sie es außerhalb der Reichweite von Kindern auf, um Sicherheitsunfälle durch unachtsame Lagerung zu vermeiden. Merkmale Der Solar Power Manager (C) ist mit herkömmlichen 6V~24V-Solarmodulen kompatibel. Er kann die wiederaufladbaren 18650-Lithiumionen-Akkus über das Solarmodul oder eine USB-Typ-C-Verbindung aufladen und bietet einen geregelten Ausgang von 5V/3A (mit Unterstützung mehrerer Protokolle, einschließlich PD/QC/FCP/PE/SFCP). Das Modul verfügt über die MPPT-Funktion (MAX Power Point Tracking) und mehrere Schutzschaltungen, sodass es mit hoher Effizienz, Stabilität und Sicherheit betrieben werden kann. Es eignet sich für solarbetriebene, stromsparende IoT- und andere Umweltschutzprojekte. 1. Unterstützt die MPPT-Funktion (MAX Power Point Tracking), maximiert die Effizienz des Solarpanels 2. Flexibles Aufladen des Akkus: über Solarpanel oder USB TYPE-C-Netzteil 3. Kompatibel mit 6 V ~ 24 V Solarmodulen, DC-002-Buchseneingang oder Schraubklemmeneingang 4. Integrierter MPPT SET-Schalter, wählen Sie den Pegel nahe dem Eingangspegel, um die Ladeeffizienz zu verbessern 5. Integrierter Aluminium-Elektrolytkondensator und SMD-Keramikkondensator, Reduzierung der Welligkeit, stabile Leistung 6. Eingebetteter Batteriehalter, unterstützt 3x 18650 wiederaufladbare Li-Ionen-Batterien 7. Mehrere LED-Anzeigen zur Überwachung des Status von Solarpanel und Batterie 8. Mehrere Schutzschaltungen: Überladung / Überentladung / Rückwärtsschutz / Überhitzung / Überstrom, stabil und sicher zu verwenden Technische Daten 1. Solareingang: 6 V – 24 V (standardmäßig 18 V) 2. Aufladen: Solarpanel, Netzteil, USB 3. Akku: 3 x 18650 Li-Ionen-Akku (nicht im Lieferumfang enthalten) 4. USB-Eingang: 5 V (Typ C, mit PD-Schnellladeunterstützung) 5. 5-V-Ausgang: 5 V / 3 A (USB-Ausgang, Typ C) 6. Ladeschlussspannung: 4,2 V +/- 1 % 7. Überentladungsschutzspannung: 3,0 V +/- 1 % 8. Ladeeffizienz des Solarpanels: ~78 % 9. USB-Aufladeeffizienz: ~93 % 10. Batterien steigern ihre Effizienz: ~92 % 11. Gehäuse: Metallgehäuse 12. Größe: 119,0 x 71,0 x 25,2 mm 13. Paketliste: Solarstrommanager (C) x1 Adapter x1 Spezifikation: Paketgewicht Gewicht eines Pakets 0,24 kg / 0,54 lb Einheitspackungsgröße 20 cm * 15 cm * 5 cm / 7,87 Zoll * 5,91 Zoll * 1,97 Zoll Menge pro Karton 40 Kartongewicht 9,00 kg / 19,84 lb Kartongröße 42 cm * 32 cm * 27 cm / 16,54 Zoll * 12,6 Zoll * 10,63 Zoll Container laden 20GP: 734 Kartons * 40 Stück = 29360 Stück 40HQ: 1705 Kartons * 40 Stück = 68200 Stück
£19.99
-
WAVESHARE SIMCom SIM7600G-H-PCIE 4G LTE Cat-4 Module, Global Coverage, GNSS, Mini-PCIe Connector
1. The SIM7600G-H-PCIE series is the LTE Cat 4 module which supports wireless communication modes of LTE-TDD/LTE-FDD/HSPA+/GSM/GPRS/EDGE etc. It supports maximum 150Mbps downlink rate and 50Mbps uplink rate.2. The SIM7600G-H-PCIE series adopts mini PCIE form factor and consists of a SIM7600-H series module and a mini PCIE adapter board. It is easy for customers to integrate. The SIM7600G-H-PCIE series integrates multiple satellite high accuracy positioning GNSS systems, with multiple built-in network protocols, supports drivers for main operation systems (USB driver for Windows, Linux and Android etc.) and software function, AT commands are compatible with SIM7500/SIM7600 series modules.3. Mean while the SIM7600G-H-PCIE series integrates main industrial standard interfaces, with powerful expansibility, including abundant interfaces such as UART, USB, GPIO, which is suitable for main IoT applications such as telematics, surveillance devices, CPE, industrial routers, and remote diagnostics etc.Operating Bands:LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66LTE-TDD: B34, B38, B39, B40, B41WCDMA: B1, B2, B4, B5, B6, B8, B19GSM: 850, 900, 1800, 1900 MHzGNSS: GPS, BeiDou, GLONASS, Galileo, QZSSData Transmission:LTE: 150 Mbps (DL) / 50 Mbps (UL)HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL)WCDMA: 384 Kbps (DL) / 384 Kbps (UL)EDGE: 236.8 Kbps (DL) / 236.8 Kbps (UL)GPRS: 85.6 Kbps (DL) / 85.6 Kbps (UL)Software Features:Operating System: Windows/Linux/AndroidCommunication Protocols: TCP, IP, IPv4, IPv6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, DNSSMS: Supports MT, MO, CB, Text, PDUFirmware Upgrade: Supports firmware upgrades via USB/FOTA interfacesHardware Specifications:SIM Card: 1.8V/3.0VAntenna Interface: IPEX Gen 1 (LTE Main Antenna + LTE Diversity Antenna + GNSS Antenna)Supply Voltage: 3V ~ 3.6VForm Factor: Mini-PCIeDimensions: 50.8 × 31.0 × 5.5 mmSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 10cm * 8cm * 8cm / 3.94inch * 3.15inch * 3.15inch Qty per Carton 64 Carton Weight 10.70kgs / 23.59lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 64 pcs = 35136 pcs40HQ: 1275 cartons * 64 pcs = 81600 pcs
£51.99
-
WAVESHARE WAVESHARE Luckfox PicoKVM Expansion Board PCIe USB Interface Universal
1. Requires Luckfox PicoKVM for remote power management.2. Universal PCIe interface, supports motherboards with PCIe x1/x4/x8/x16 slots. Note: PCIe interfaces are for 12V power only.3. Two front panel I/O connectors, allowing simultaneous connection to both front panel I/O ports and chassis panels for power control.4. Supports both PCIe and USB power delivery modes, switchable via a switch.5. Provides USB-A and USB-C ports via motherboard USB connectors, allowing connection to Luckfox PicoKVM or other USB devices.6. Web-based control, enabling remote power control (power on/off, restart, forced shutdown) and power status monitoring with Luckfox PicoKVM.7. Compact form factor adaptable to various chassis structures, saving external space.8. Dimensions: 68.7 x 51 mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 128 Carton Weight 7.50kgs / 16.53lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 128 pcs = 70272 pcs40HQ: 1275 cartons * 128 pcs = 163200 pcs
£9.99
Sie haben 24 von 251 Produkten gesehen