Digitalmultimeter
-
FNIRSI FNIRSI 2 In 1 Mini Portable Digital Oscilloscope Signal Generator, Standard, Upgrade
1. Sampling rate: 5MS/s2. Bandwidth: 1M3. Vertical sensitivity: 10mV/Div~10V/Div4. Time base range: 500ns~20S5. Waveform pause: supported6. Trigger mode: With complete trigger function (single, normal, automatic), it can be used freely for both periodic analog signals and non-periodic digital signals7. Voltage range: Can measure 400V voltage signal8. Calibration square wave: Comes with 1KHz calibration square wave, easy and convenient probe calibration9. Frequency: 0-10KHz10. Amplitude: 0.1~3.3V11. Coupling mode: AC/DC12. Display: 2.8 inches/PPI 320x24013. USB charging: 5V/1A14. Lithium battery capacity: 1000mAh15. Waveform: sine wave, rectangular wave, sawtooth wave, half wave, full wave, positive step wave, reverse step wave, noise wave, exponential rise, exponential fall, DC signal, multi-audio, Sink pulse, Lorentz wave16. Automatically shut down after a certain period of no operation, saving energy and extending service life17. Suitable for use in a variety of occasions, lightweight and space-saving, can be carried with you for work, maintenance and DIY tools18. Highly sensitive buttons, super simple and easy to understand operation experience19. Type-C port, supports firmware upgrades and charging20. Standard configuration, upgrade comparison: host, basic accessories are the same, the upgrade is more than the standard configuration, a P6100 probe (10x probe) + adapter21. Size: 99x68.3x19.5mm22. Weight: 100gSpecification: Package Weight One Package Weight 0.18kgs / 0.40lb One Package Size 16cm * 10cm * 5cm / 6.3inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 18.50kgs / 40.79lb Carton Size 47cm * 44cm * 28cm / 18.5inch * 17.32inch * 11.02inch Loading Container 20GP: 460 cartons * 100 pcs = 46000 pcs40HQ: 1069 cartons * 100 pcs = 106900 pcs
£28.99 - £32.99
-
FNIRSI FNIRSI Digital Tweezers Resistor Capacitor Component Test Multimeter
1. Screen: 1.14 inches2. Power supply voltage: 250mAh rechargeable lithium battery3. Charging specifications: USB Type-C, 5V/1A4. Accurately measure tiny components and dense pins, unique design, gold-plated tweezers5. Integrates multi-functional measurements, accurately covers resistance, capacitance, inductance, diodes, etc., and uses cutting-edge technology to ensure accurate and reliable data6. Lightweight design, compact size, easy to carry, and convenient for business trips7. Brass gold-plated material, straight and curved tweezers heads can be replaced, high hardness, more durable, adapt to different application scenarios, and provide more accurate measurement stabilitySupport data retention, automatically record data and generate EXCEL tables, view recorded data on the computer8. Equipped with a 1.14-inch high-definition color display, the interface is clear and intuitive, data reading is effortless, making your test work smoother and unimpeded9. Automatically identify components, display primary and secondary parameters at the same time, ESR (equivalent resistance); D value (loss tangent); Q value (quality factor); X value (reactance); Z value (total impedance)10. Supports three test frequencies of 100Hz, 1kHz, and 10kHz, and 0.3V and 0.6Vrms effective value test levels, making the test results comprehensive and accurate11. Weight: 41g12. Size: 28x19x150mmPacking list:1. Smart tweezer bridge2. Gold-plated tweezers bent feet (a pair)3. Iron sheet (with adhesive backing)4. USB data cable5. User manual6. Packing boxSpecification: Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 20cm * 7cm * 7cm / 7.87inch * 2.76inch * 2.76inch Qty per Carton 100 Carton Weight 18.50kgs / 40.79lb Carton Size 56cm * 41cm * 34cm / 22.05inch * 16.14inch * 13.39inch Loading Container 20GP: 341 cartons * 100 pcs = 34100 pcs40HQ: 793 cartons * 100 pcs = 79300 pcs
£23.99
-
FNIRSI FNIRSI 2C53P Dual Channel Flat Panel Digital Oscilloscope Multimeter Signal Generator 3 In 1, 2C53P
1. 4.3-inch IPS ultra-high definition screen, easy to use2. Built-in high-capacity lithium battery, long battery life3. Using the core of a powerful FPGA + MCU + high-speed ADC hardware architecture system waveforms smooth and clear4. Measurement of millivolt level of weak signals, support for 20M bandwidth limits5. Powerful waveform computing capabilities, real-time addition, subtraction, multiplication and division operations, in-depth analysis and processing of complex signals6. Real-time capture and display the changes in a variety of measurement parameters, forming a clear and concise data trend graph, but also has the ability to retain up to 5 groups of measurement data, at a glance7. Double current fuse, to prevent burning the meter more safely8. Easy to manage oscillometric images, can be connected to a computer via USB cable for secondary analysis9. Lightweight, one-handed, easy to put into a pocket or toolkit, convenient to carryBasic parameters:1. Screen material: surface tempered glass + glass GLASS material touch screen + IPS color screen2. Backlight: backlight brightness can be set3. Power supply: Type-C (5V/2A)4. Battery: 4000mAh li-ion battery5. Size: 145 x 98 x 35mm6. Weight: 360gOscilloscope parameters:1. Channel: dual-channel2. Bandwidth: 50MHz3. Real-time sampling rate: 250MSa / s4. Memory depth: up to 64kByte5. Time base range: 10ns/div-10s/div6. Vertical sensitivity: 10mv/div-10v/div7. Waveform display mode: YT / XY / scrolling8. Vertical resolution: 8 bits9. Input impedance: ΙΜΩ10. Bandwidth limitation: support 20MHz limitation11. Probe attenuation factor: 1x/10x12. Input coupling: AC/DC13. Trigger type: rising edge/falling edge14. Maximum voltage: +/-400V15. Trigger level range: 8 cells (positive and negative)16. Trigger mode: automatic / normal / single17. Memory space: 13M18. Measurement data: period, frequency, peak-to-peak value, maximum value, minimum value, average value, RMS value, amplitude, duty cycle and pulse widthSignal generator parameters:1. Different waveform output frequency: sine wave: 10MHz, other waveforms: 5MHz2. Waveform frequency: 0-10ΜΗz3. Waveform amplitude: 0.1V-3.0V4. Duty cycle of square wave: 0-100 percentMultimeter parameters:1. DC voltage: 1.9999V/19.999V/199.99V/1000.0V2. AC voltage: 1.9999V/19.999V/199.99V/760.0V3. DC current: 19.999mA/199.99mA/1.9999A/9.999A4. AC current: 19.999mA/199.99mA/1.9999A/9.999A5. Resistance: 19.999ΜΩ/1.9999ΜΩ/199.99ΚΩ/19.999ΚΩ/1.9999ΚΩ/199.99Ω6. Capacitance: 999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF9.999mF/99.99mF7. Temperature: -55-1300 degrees celsius/-67-2372 degrees fahrenheitSpecification: Package Weight One Package Weight 0.97kgs / 2.14lb One Package Size 24cm * 14cm * 7cm / 9.45inch * 5.51inch * 2.76inch Qty per Carton 20 Carton Weight 21.00kgs / 46.30lb Carton Size 49cm * 31cm * 39cm / 19.29inch * 12.2inch * 15.35inch Loading Container 20GP: 450 cartons * 20 pcs = 9000 pcs40HQ: 1044 cartons * 20 pcs = 20880 pcs
£94.99
-
FNIRSI FNIRSI 3 In 1 Handheld Digital Oscilloscope LCR Transistor Tester, DSO-TC3 Standard, DSO-TC3 Upgrade
1. Display: 2.4-inch TFT colour screen, LED backlighting2. Supply voltage: built-in 1500mAh rechargeable lithium battery3. Charging specification: USB Type-C, +5V4. Product volume: 79x103x31mm5. Real-time sampling rate: 10MSa / s6. Analogue bandwidth: 500Khz7. Input impedance: 1 milliohm8. Coupling method: AC/DC9. Test voltage range: 400V10. Vertical sensitivity: 10mV-10V11. Horizontal time base range: 1us-10s12. Trigger mode automatic: normal single13. Trigger type: rising edge/falling edge14. Compact body, simple modelling, easy to use, to meet the measurement routine15. Automatic identification and measurement of various transistors, including NPN and PNP transistors, N-channel and P-channel FETs, junction FETs, diodes, dual-diode thyristors, etc., as well as resistors, inductors, capacitors and other passive components16. Built-in 1500mAh high-capacity lithium battery, power supply continuous operation without isolation transformer, safer to use17. 2.4-inch anti-see-through high-resolution display, allowing you to read clearly even in bright sunlight18. One-piece folding, placed in a stable support, does not take up space19. Size: 79x103x31mmStandard:- DSO-TC3 Tester x 1-Type-C charging cable x 1-Common probe x 1-Test Hook x 3Upgrade:-DSO-TC3 Tester x 1-Adaptor x 1-P6100 High Voltage Probe x 1-Type-C charging cable x 1-Normal Probe x 1-Test Hook x 1Specification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 13cm * 18cm * 6cm / 5.12inch * 7.09inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 64cm * 32cm * 31cm / 25.2inch * 12.6inch * 12.2inch Loading Container 20GP: 420 cartons * 50 pcs = 21000 pcs40HQ: 975 cartons * 50 pcs = 48750 pcs
£42.99 - £46.99
-
FNIRSI FNIRSI 3 In 1 Handheld Digital Oscilloscope Dual-Channel Multimeter, 2C23T Standard, 2C23T Upgrade
Oscilloscope function introduction:1. Dual channel 2X10MHz bandwidth, 50MS/s real-time sampling rate2. Measuring voltage: 400V (MAX)3. FPGA+ADC+MCU high-performance hardware architecture, waveform details are captured without loss4. With complete trigger functions (automatic, single, regular)5. Equipped with efficient one-button automatic adjustment, the measured waveform can be displayed without cumbersome adjustments.6. Save waveform screenshots and support exporting pictures to the computer to facilitate secondary waveform analysis.Multimeter function introduction:1. Four-digit integer 9999 count true effective value measurement2. Voltage, current, capacitance, resistance, diode, continuity, zero line identification, temperature3. Measuring voltage: AC750V, DC1000V (MAX)4. Automatic range, intelligent anti-burning5. Data retention, color screen digital displayIntroduction to signal generator functions1. 7 signal waveforms: sine wave, square wave, triangle wave, full wave, half wave, noise wave, DC2. Output frequency: 1Hz-2MHz3. Output amplitude: 0.1-3.3V4. Output duty cycle: 0-1001. Screen: 2.8-inch true color screen2. Resolution: 320 x 2403. Charging: TYPE-C (5V/1A)4. Battery: 3000mAh lithium battery5. Supported functions: oscilloscope, signal generator, digital multimeter6. Standby time: 8 hours7. Language: English, Russian, Portuguese, Japanese, German8. Size: 141.7x93.5x38mm9. Weight: 300g10. The hardware architecture adopts the same ARM + FPGA + high-speed ADC solution as that of desktop computers. It has high cost and is an unusual CPU direct acquisition solution. The trigger system is powerful and has super waveform capture capabilities without losing the waveform details.11. It has complete trigger modes: automatic, single, and normal; equipped with efficient one-button automatic adjustment, which can display the measured signal waveform without cumbersome adjustments.12. Save waveform screenshots with one click. The saved pictures can be viewed on an oscilloscope or exported to a computer to facilitate secondary analysis of the collected signals.13. Intelligent anti-burning has overload protection, and built-in double fuses prevent meter burning and are safer14. 3000mah large-capacity lithium battery, TYPE-C port can be recharged worry-free and labor-saving, and has a long battery life of 8 hours15. The extendable stand can be used and placed for easy reading.16. ABS material + silicone jacket, sturdy and anti-fall, comfortable to the touchEnglish standard:1. 2C23T x 12. 10x probe x 13. Red and black alligator clip probe x 14. Multimeter lead x 15. Charging cable x 16. Packing box x 17. Instructions x 1English upgrade:1. 2C23T x 12. Instructions x 13. Red and black alligator clip probe x 14. Multimeter lead x 15. Charging cable x 16. Packing box x 17. 10x probe x 2Specification: Package Weight One Package Weight 0.70kgs / 1.54lb One Package Size 26cm * 13cm * 9cm / 10.24inch * 5.12inch * 3.54inch Qty per Carton 20 Carton Weight 13.50kgs / 29.76lb Carton Size 54cm * 29cm * 45cm / 21.26inch * 11.42inch * 17.72inch Loading Container 20GP: 378 cartons * 20 pcs = 7560 pcs40HQ: 878 cartons * 20 pcs = 17560 pcs
£59.99 - £63.99
-
FNIRSI FNIRSI 2 in 1 Dual-channel 100M Bandwidth Digital Oscilloscope 1GS Sampling Signal Generator, US Plug, 1014D, 1014D +P4100 Probe
1. The oscilloscope has a real-time sampling rate of 1GSa/s and an analog bandwidth of 100MHz x 22. Complete trigger function (single/normal/automatic), both periodic analog signal and non-periodic digital signal can be used freely3. Built-in DDS function signal generator and the industrys original chopping output (@2.5vpp), all signal frequency steps are 1Hz, support 14 kinds of standard function signals and a customizable chopping signal, the chopping output device intercepts part or all signals4. The complex signal measured by the oscilloscope is used as the output signal of the signal generator, which can store up to 1000 custom cut-off signals5. The built-in high-voltage protection module can withstand continuous voltage up to 400V, so there is no need to worry about the oscilloscope burning accident caused by the probe not moving to the 10x position7. Large time base scrolling method, which can monitor slow level changes8. Equipped with an efficient one-key automatic display of measurement waveforms, without cumbersome adjustments9. 7-inch 800x480 resolution high-definition LCD display10. Cursor measurement function, when manually reading the amplitude and frequency parameters, there is no need to read the background scale unit and quantity, no need to convert, and directly obtain the peak-to-peak value and frequency. Very convenient screen capture and waveform storage function10. Built-in 1GB storage space, can store 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform with one key11. Powerful waveform image manager, supports thumbnail browsing, viewing, viewing details, page turning, deletion, and waveform zooming in, zooming out, moving, etc., which is convenient for secondary analysis12. The fuselage is equipped with a USB interface, which can be connected to a computer to realize the sharing of screenshots and pictures of itself, which is convenient for secondary analysis13. Graphical display function, which can compare and judge the amplitude, frequency and phase of two groups of signals14. The FFT viewing function can estimate the harmonic components of the signal15. Built-in DDS signal generator, supports 12 kinds of function signals16. For high intelligent decoding algorithm, the encoder has unlimited life, intelligent anti-burn function, 1X can withstand 400V withstand voltage17. With 100MHz x 2 analog bandwidth and @1GSa/s sampling rate (1X = 5MHz, 10X = 100MHz)18. High measurement voltage range: 1X can measure 0~40V, 10X can measure 0~400V19. Up to 12 parameters measurement: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period20. Cursor measurement function: convenient for manual measurement of period, frequency and voltage =21. Perfect trigger function (single, normal, automatic), freeze waveform display at any time (pause function)22. With screen brightness adjustment function and background grid brightness adjustment function, easy to carry23. Material: ABS24. Analog log bandwidth: 100MHz x 225. Number of channels: 2 channels26. Real-time sampling rate: 1GSa/s27. Vertical sensitivity: 50 mV/div ~ 500 V/div28. Horizontal time base range: 50S/div～10nS/div29. Test voltage: 40 V (1X probe), 400 V (10X probe)30. Storage depth: 240Kbit31. Input resistance: 1 milliohm32. ADC precision: 8bits33. Coupling method: AC/DC34. Trigger mode: single, normal, automatic35. Trigger edge: rising edge/falling edge36. External trigger voltage: 0~40 V37. Expansion port: USB image exportPacking list:FNIRSI-1014D Oscilloscope host x 1Matched 100MHz probes (1X and 10X) x 2Clip x 1US power adapter x 1USB cable x 1English user manual x 1P4100 probe (optional) x 1Specification: Package Weight One Package Weight 2.61kgs / 5.76lb One Package Size 37cm * 20cm * 13cm / 14.57inch * 7.87inch * 5.12inch Qty per Carton 2 Carton Weight 4.30kgs / 9.48lb Carton Size 39cm * 22cm * 28cm / 15.35inch * 8.66inch * 11.02inch Loading Container 20GP: 1110 cartons * 2 pcs = 2220 pcs40HQ: 2576 cartons * 2 pcs = 5152 pcs
£121.99 - £134.99
-
FNIRSI FNIRSI S1 Digital High Precision Fully Automatic Digital Multimeter, S1
1. Material: ABS2. AC voltage: 1000V3. DC voltage: 1000V4. Resistance: 100 milliohms5. Temperature: 1000 degrees Celsius6. Capacitance: 10mF7. Frequency: 10MHz8. Range: 99999. LED backlight: Yes10. Automatic shutdown: 15 minutes11. Intelligent anti-burning, full gear overload protection12. Automatically identify intelligent measurement, no need to switch manually13. After the measurement is stable, the data will be displayed permanently14. NCV induction voltage, sound and light alarm, farewell to the danger of electric shock15. Live zero live wire identification function, both a multimeter and a test pen16. Using intelligent computing chip, accurate measurement17. Built-in flashlight function, convenient to work in the dark and dark environment18. TYPE-C charging, built-in 1000mAh lithium battery, continuous work for 5 hours, long-lasting battery life19. Small size, easy to carry20. Dimensions: 75x75x143mm21. Weight: 135 gramsSpecification: Package Weight One Package Weight 0.36kgs / 0.80lb One Package Size 20cm * 12cm * 5cm / 7.87inch * 4.72inch * 1.97inch Qty per Carton 82 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 82 pcs = 14514 pcs40HQ: 412 cartons * 82 pcs = 33784 pcs
£23.99
-
GVDA GVDA GD166B Digital Clamp Multimeter Supports DC, GD166B
1. Material: ABS2. Measuring voltage range: 600V3. Measuring current range: 600A4. Measuring resistance range: 60M5. Maximum count: 60006. Clamp opening size: 30mm7. Battery type: 3x1.5V AAA (not included in this product)8. Support AC current, DC current9. Under intelligent mode measurement, only current, voltage, resistance, on-off buzzer can be measured10. Equipped with lighting LED lights, it can be operated even in dark environment11. Equipped with the design of placing test leads, which is more convenient to use12. High-definition backlit color display, the measurement data is clearly displayed13. Temperature measurement range: -40 to 1000 degrees14. It is suitable for circuit maintenance, electronic maintenance, mechanical and electrical maintenance, vehicle inspection, home appliance maintenance, etc.Specification: Package Weight One Package Weight 0.43kgs / 0.96lb One Package Size 23cm * 12cm * 5cm / 9.06inch * 4.72inch * 1.97inch Qty per Carton 48 Carton Weight 21.64kgs / 47.71lb Carton Size 48cm * 50cm * 32cm / 18.9inch * 19.69inch * 12.6inch Loading Container 20GP: 347 cartons * 48 pcs = 16656 pcs40HQ: 806 cartons * 48 pcs = 38688 pcs
£30.99
-
ANENG ANENG Fully Automatic Intelligent Digital Multimeter For Electrical Engineering
1. Material: ABS2. DC voltage: 0.8V-1000V3. AC voltage: 0.8V-750V4. AC/DC current: 0mA-10A5. Resistance: 0Ω-60MΩ6. Capacitance: 0.0mF-100.0mF7. Count: 60008. Automatic shutdown: the meter will automatically shut down after 15 minutes of inactivity to save power.9. Comfortable grip with anti-slip textured design for easier measurement; ergonomic design.10. High-definition backlit screen ensures clear visibility in complex environments; flashlight illumination eliminates the fear of not being able to see the measurement location.11. The meter is powered by a built-in 3.7V lithium battery and comes with a TYPE-C charging cable.12. Switch to LIVE mode and use the red probe to measure. When it touches the live wire, a progress bar will appear on the screen, accompanied by a beep; the neutral wire will not react.13. Connect the positive and negative terminals of the temperature wire to the instrument, and touch the other end to the object being measured. The real-time temperature will be displayed, providing clear data and easy operation.14. Switch to the NCV setting. When AC voltage is detected, a beeping alarm will sound; the closer the object, the more rapid the alarm.15. Dimensions: 14.5 x 7 x 1.9 cm16. Weight: 162gSpecification: Package Weight One Package Weight 0.41kgs / 0.90lb One Package Size 15cm * 8cm * 5cm / 5.91inch * 3.15inch * 1.97inch Qty per Carton 72 Carton Weight 30.30kgs / 66.80lb Carton Size 47cm * 34cm * 32cm / 18.5inch * 13.39inch * 12.6inch Loading Container 20GP: 521 cartons * 72 pcs = 37512 pcs40HQ: 1210 cartons * 72 pcs = 87120 pcs
£13.99
-
ANENG ANENG 1000V Insulation Resistance Tester Digital Megohmmeter, MH17
1. Material: ABS/PVC/Silicone2. AC voltage: 0V-1000V3. DC voltage: 0V-750V4. Capacitance: 0nF-99.99mF5. Resistance: 0Ω-19.99MΩ6. Frequency: 9.999Hz-999.9kHz7. Count: 199998. Insulation resistance measurement: connect the test leads, select the voltage range on the dial, press TIME to set the time, press TEST to start, and the test is complete when the triangle indicator light goes out.9. Polarization index (PI) Measurement: the polarization index is measured because insulation is sensitive to temperature and humidity. Initial measurements are inaccurate due to interference current. Long-term measurement and calculation of this index are necessary to assess insulation quality and aging.10. Absorption ratio (DAR) Measurement: determines if moisture affects the insulation resistance value of the device by measuring the insulation resistance value after 1 minute and the insulation resistance absorption ratio after 15 seconds.11. Powered by three 3.7V 14500 batteries, removable and rechargeable with a charger. After fully charging, reinstall the batteries in the meter for recycling and extended battery life (batteries not included in shipment).12. If the meter remains inactive for approximately 15 minutes, it will automatically shut down and enter sleep mode, saving power and providing peace of mind.13. Weight: 375g14. Dimensions: 18x9x5.6cmSpecification: Package Weight One Package Weight 0.78kgs / 1.72lb One Package Size 27cm * 13cm * 7cm / 10.63inch * 5.12inch * 2.76inch Qty per Carton 8 Carton Weight 7.30kgs / 16.09lb Carton Size 29cm * 28cm * 30cm / 11.42inch * 11.02inch * 11.81inch Loading Container 20GP: 1094 cartons * 8 pcs = 8752 pcs40HQ: 2541 cartons * 8 pcs = 20328 pcs
£30.99
-
ANENG ANENG Digital Intelligent Car Repair Pen Multimeter, A3016 Lithium Battery, A3015 Battery
1. Material: ABS/stainless steel2. Count: 40003. NCV sensitivity: when the probe tip is close to the object being tested, a green backlight flashes when the induced electric field is weak, and a red backlight flashes when the induced electric field is strong.4. Circuit break location: select NCV mode and follow the circuit. A strong alarm signal indicates a good circuit, while a weak signal indicates a break.5. Suitable for various automotive circuit tests; AUTO automatically identifies AC voltage, resistance, and continuity tests.6. P-Phase sequence detection: switch to Phase mode and follow the steps below to touch the A, B, and C points of the three-phase power supply to detect the phase sequence.7. LCD backlit display: the screen values ??are clearly visible in dark environments.8. Live mode: when the probe tip touches the circuit, the live wire displays "H" with a beep, and the neutral wire displays "Live" with no beep.9. High-resilience spring cord, made of stretchable and tensile-resistant material, will not deform even after repeated stretching, fully elastic and shrinks back to its original shape without becoming tangled, featuring tensile strength, durability, and cold resistance.10. A3016: equipped with a Type-C charging cable, red light during charging, green light when fully charged, built-in 500mA high-capacity rechargeable lithium battery.11. A3015: uses two AAA batteries (not included).12. After 15 minutes of inactivity after powering on, the product will automatically enter sleep mode and shut down, extending battery life and saving energy.13. Dimensions: 17.7x2.8x2.6cmSpecification: Package Weight One Package Weight 0.19kgs / 0.42lb One Package Size 20cm * 9cm * 5cm / 7.87inch * 3.54inch * 1.97inch Qty per Carton 48 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 48 pcs = 25056 pcs40HQ: 1212 cartons * 48 pcs = 58176 pcs
£9.99
-
BSIDE High Precision Smart Clamp Meter AC/DC 100A 6000-Count Multimeter, UX1
1. DC voltage range/resolution/accuracy: 0.001-610 V / 0.001 V / +/- (0.8% + 3) 2. AC voltage range/resolution/accuracy: 0.001-610 V / 0.001 V / +/- (1.0% + 3) 3. DC current range/resolution/accuracy: 0.001-100 A / 0.001 A / +/-(3%+5) 4. AC current range/resolution/accuracy: 0.001-100 A / 0.001 A / +/-(3%+5) 5. Resistance range/resolution/accuracy: 0.1ohm-60 M ohm / 0.1 ohm / +/-(1.2%+3) 6. Capacitance range/resolution/accuracy: 0.01 μF-60 μF / 0.01 μF / +/-(3.5%+8) 7. Frequency range/resolution/accuracy: 1 Hz-9.999 MHz / 0.001 Hz / +/-(2.0%+10) 8. Duty cycle range/resolution/accuracy: 10.0-95.0% / 0.1% / +/-3.0% 9. Temperature (Type K thermocouple) range/resolution/accuracy: -50 to 1000 degrees Celsius / 1 degree Celsius / +/-(2.0%+3) 10. Ambient temperature range/resolution/accuracy: 0 to 50 degrees Celsius / 1 degrees Celsius / +/-2 degrees Celsius 11. Buzzer activation: the buzzer sounds when the measured resistance is less than 50 ohms12. Diode: automatic recognition of diodes with voltage less than 3V13. Auto-off: 15 minutes14. Other functions: non-contact voltage detection, live wire detection15. Power supply: built-in 3.7V 400mA lithium battery16. Charging port: Type-C17. Size: about 19.2 x 4.58 x 3 cm18. Weight: about 122 gFeatures:1. No need to strip wires or interrupt circuits; simply clip thick or thin wires into the openings to instantly display AC and DC current readings2. NCV (Non-Contact Voltage Detection) for safer voltage testing without physical contact3. Full-range intelligent burnout protection; the meter won’t burn out even if the wrong range is selected, ensuring safer use4. Intelligent burnout protection chip with full-range overload protection; automatically starts measuring upon power-on5. 2.8-inch HD LCD screen for clear readings6. Silicone buttons for easy operationPackage list:1. Tester x 12. Test leads x 23. Type K thermocouple x 14. Charging cable x 15. Storage case x 16. User manual x 1Specification: Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 30cm * 9cm * 5cm / 11.81inch * 3.54inch * 1.97inch Qty per Carton 50 Carton Weight 17.50kgs / 38.58lb Carton Size 44cm * 38cm * 32cm / 17.32inch * 14.96inch * 12.6inch Loading Container 20GP: 498 cartons * 50 pcs = 24900 pcs40HQ: 1157 cartons * 50 pcs = 57850 pcs
£35.99
-
BSIDE BSIDE A1 Dual Mode Smart Handheld High Precision Detection Electrician Voltage Multimeter Without Battery, A1
Features: 1. Dual-function anti-burn multimeter, smart test pen, fully automatic 2. Sound and light alarm, two-color display 3. Easy detection of LIVE zero firewire jack line 4. Automatic identification, live line/zero line distinction, breakpoint detection, sound and light alarm, on-off beep, automatic shutdown, NCV voltage detection, replaceable test leads, flashlight, etc. 5. Directly measure AC and DC voltage and resistance on and off when power on, no need to shift gears 6. Non-contact zero-fire judgment, insulation operation, safety check 7. High-brightness LED, powerful wick, high-brightness output, high-transmittance reflector, using anti-reflection tempered lens, large-scale spot coverage 8. Extremely fast measurement, intelligent identification 9. High sensitivity mode, top induction, identify dangerous voltage signals Parameter: 1. Range: 0-500V 2. Resistance: 10 megohms 3. Voltage frequency: 1000Hz 4. Power supply: 2 AA batteries (not included in shipment) 5. Automatic shutdown: 5 minutes 6. On-off buzzer: the measured resistance is less than 30 ohms, the buzzer sounds 7. Non-contact voltage detection alarm: 6-1000V AC voltage 8. Storage temperature: -10 to 60 degrees Celsius 9. Working temperature: 0-40 degrees Celsius 10. Dimensions: 12.7 x 4.2 x 2.5CM 11. Net weight: 67g Packing list: -.1 x host -.1 x Chinese and English dual instruction manual -.1 x test lead -.1 x screwdriver -.1 x boxSpecification: Package Weight One Package Weight 0.14kgs / 0.31lb One Package Size 16.5cm * 7.3cm * 3.8cm / 6.5inch * 2.87inch * 1.5inch Qty per Carton 80 Carton Weight 12.50kgs / 27.56lb Carton Size 41cm * 35cm * 31cm / 16.14inch * 13.78inch * 12.2inch Loading Container 20GP: 599 cartons * 80 pcs = 47920 pcs40HQ: 1391 cartons * 80 pcs = 111280 pcs
£10.99
-
OWON VC101A (3 3/4) Oscilloscope Signal Source Multifunctional All-in-one Multimeter, HDS242 With Single Probe (40M Bandwidth), HDS272 With Single Probe (70M Bandwidth), HDS242S With Single Probe (40M Bandwidth), HDS272S With Single Probe (70M Bandwidt...
1. Self-calibration function2. Built-in 4400 mAh battery3. Powerful power management capability4. Ultra-low power consumption: less than 3W5. Small and lightweight, compact shape6. One button setting, automatic measurement7. Dual channel, 40/70M optional8. Suspendable bracket, save working space9. Support SCPI communication function, convenient for secondary development10. Oscilloscope + multimeter + signal source multifunction in one11. One package adhesive design, long time use is not easy to fall off12. High-resolution color LCD screen, clear and delicate display13. Type-c charging interface, support charging power, support the upper computer connection14. Oscilloscope function: double sampling mode, high refresh, deep storage, support 7 kinds of automatic measurement, cursor measurement function, save function15. Size: 96x38x198mm16. Weight: about 600gSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 22cm * 13cm * 5cm / 8.66inch * 5.12inch * 1.97inch Qty per Carton 42 Carton Weight 30.00kgs / 66.14lb Carton Size 45cm * 45cm * 17cm / 17.72inch * 17.72inch * 6.69inch Loading Container 20GP: 774 cartons * 42 pcs = 32508 pcs40HQ: 1798 cartons * 42 pcs = 75516 pcs
£94.99 - £177.99
-
ANENG ANENG AN-Q1 Automatic High-Precision Intelligent Digital Multimeter, Standard, Standard with Cable
1. Material: ABS+TPE2. Display value: 1999 (MAX)3. Power supply: 2 AA batteries (not included)4. DC voltage: 999.9mV/9.999V/99.99V/999.9V5. DC voltage (mV): 9.999mV /99.99mV6. AC voltage (V): 999.9mV/9.999V/99.99V/750.0V7. AC voltage (mV): 9.999mV /99.99mV8. DC current (mA&A): 999.9mA/9.999A9. DC current (A): 9999A10. Alternating current (mA&A): 999.9mA/9.999A11. Alternating current (A): 9999A12. Resistance: 0.00-9.999 milliohms13. Capacitance: 0.00-9.999mF14. Hertz: 0.00MHz-5.000MHz15. Automatic shutdown after 15 minutes without operation16. With a 45-degree bracket on the back, it is easy to stand up and operate17. Dimensions: 145x32.7x72mm18. Weight: 171 gramsThe standard package includes:1. Multimeter2. Test wire 3. ManualThe standard package with a combination cable includes:1. Multimeter2. Test wire 3. Manual4. Combination lineSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 20cm * 12cm * 6cm / 7.87inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 21.00kgs / 46.30lb Carton Size 50cm * 50cm * 42cm / 19.69inch * 19.69inch * 16.54inch Loading Container 20GP: 253 cartons * 40 pcs = 10120 pcs40HQ: 589 cartons * 40 pcs = 23560 pcs
£33.99 - £36.99
-
BSIDE BSIDE ACM91 Digital Clamp Meter AC/DC Current 1mA True RMS Auto Range Capacitor Tester Multimeter, ACM91 Blue, ACM91 Black, ACM91 Grey
1. High-precision clamp head design, used for AC and DC high current measurement, input current: 100A2. The two-line display on the screen can display AC voltage, current and frequency at the same time3. The bottom dual input jack design, all functions are shared, convenient, fast and beautiful4. The single-sided meter pen storage card position is convenient for operation in any environment, and is highly efficient5. The back buckle hook design can be hung on belts, trouser pockets, pockets, and can be hung on a lanyard and neck6. Detection mode One-handed operation voltage detection, zero fire line discrimination7. V ~alert dangerous voltage alarm8. AC and DC voltage measurement (600V)9. Frequency measurement of AC and DC current: 100A10. Display: 6000 counts11. Clamp head size: 20 mm12. Battery: 3 x 1.5 V AA batteries (not included)13. Dimensions: 179 x 67 x 36 mmPacking list:1. Clamp meter x 12. Cloth cover x 13. K-type temperature probe x 14. Test lead x 1 pair5. Manual x 1Specification: Package Weight One Package Weight 0.34kgs / 0.76lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 50 Carton Weight 18.50kgs / 40.79lb Carton Size 42cm * 25cm * 27cm / 16.54inch * 9.84inch * 10.63inch Loading Container 20GP: 940 cartons * 50 pcs = 47000 pcs40HQ: 2183 cartons * 50 pcs = 109150 pcs
£35.99
-
UNI-T 1000A 42mm Jaw Size Digital Clamp Meter AC DC Voltage Detector, UT205E 1000A, UT208B 1000A
UT205E: - true rms - Continuity test - Diode test - duty cycle - NCV test pen - Maximum/minimum value - Automatic/manual ranging - relative value - Flashlight/Backlight - Gear record - Automatic shut-down parameter: - AC current: 0.01A~1000A - Current frequency: 50Hz~60Hz - DC voltage: 0.1mV~1000V - AC voltage: 0.001V~1000V - High voltage frequency: 40Hz~400Hz - Resistance measurement: 0.1ohm~60mohm - Capacitance measurement: 0.01nF~60mF - Low voltage frequency: 10Hz~1MHz - Duty cycle: 0.1%~90% - Jaw opening: 42mm - Machine size: 272 x 81 x 43.5mm - Machine weight: 447g - Power supply mode: 3 AAA batteries (batteries are not included) Standard configuration: packing box + manual + test pen + cloth bagSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 30cm * 14cm * 8cm / 11.81inch * 5.51inch * 3.15inch Qty per Carton 118 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 118 pcs = 20886 pcs40HQ: 412 cartons * 118 pcs = 48616 pcs
£55.99 - £91.99
-
UNI-T Digital Clamp Meter AC DC Voltage Detector, UT213A 400A, UT213B 400A, UT213C 400A
UT213A: -Diode measurement -Low voltage display -On/Off beep -Data hold -Input impedance -Automatic power off -Screen backlight -Relative measurement -NCV meter pen -Flashlight illumination Parameters: -AC voltage: 0.001V~600V -DC voltage: 0.0001V~600V -AC current: 0.001A~400A -Resistance measurement: 0.1??~40M?? -Capacitance measurement: 0.01nF~100??F -Frequency measurement: 0.01Hz-1MHz -Jaw opening: 30mm -Machine size: 220mmX75mmX40mm -Machine weight: 280g -Power supply: 3 No. 7 batteries (batteries are not included) Standard equipment: box + manual + meter pen + cloth bag Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 22cm * 14cm * 8cm / 8.66inch * 5.51inch * 3.15inch Qty per Carton 118 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 118 pcs = 20886 pcs40HQ: 412 cartons * 118 pcs = 48616 pcs
£45.99 - £81.99
-
GVDA GVDA GD128PLUS Intelligent High Precision Automatic Digital Multimeter, GD128PLUS
1. DC power supply range: 1000V 2. AC voltage range: 750V 3. DC current range: 10A 4. AC current range: 10A 5. Capacitance range: 100mF 6. Maximum display: 9999 7. In smart mode, only DC voltage, AC voltage, resistance, and on-off buzzer can be measured. 8. Support non-contact voltage induction measurement, single test lead live wire detection 9. High-definition backlit color display, data is clearly visible 10. Lithium batteries can be charged directly. With flashlight function 11. With K-type temperature probe, temperature range: -40 degrees to 1000 degrees 12. Test lead insertion prompt, prompting to insert the probe into the corresponding jack 13. Suitable for line maintenance, electronic maintenance, mechanical and electrical maintenance, vehicle inspection, home appliance maintenance, etc.Specification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 22cm * 12cm * 7cm / 8.66inch * 4.72inch * 2.76inch Qty per Carton 40 Carton Weight 22.60kgs / 49.82lb Carton Size 46cm * 50cm * 37cm / 18.11inch * 19.69inch * 14.57inch Loading Container 20GP: 313 cartons * 40 pcs = 12520 pcs40HQ: 727 cartons * 40 pcs = 29080 pcs
£32.99
-
UNI-T UNI-T UT204+ 600A Digital Clamp Meter AC DC Voltage Detector, UT204+ 600A
Function parameter:1. Diode measurement2. Buzzer on and off3. Data retention4. Auto range5. NCV test pencil6. Neutral live wire measurement7. Screen backlight8. Relative measurement9. Automatic shutdown10. Duty cycle11. True RMS12. MAX/MIN Mode13. AC voltage: 0.001V~600V14. DC voltage: 0.1mV~600V15. AC current: 0.01A~600A16. DC current: 0.01A~600A17. Voltage frequency: 10-60KHz18. Capacitance measurement: 0.01nF~6019. Resistance measurement: 0.1Ω-60.00MΩ20. Temperature measurement: -40~1000 degrees Celsius21. Frequency measurement: 0.01Hz~10MHz22. Jaw opening: 28mm23. Machine size: 215mmX63.5mmX36mm24. Machine weight: 248g25. Power supply mode: 2 AAA batteries (not included)Accessories: manual, test leads, cloth bag, temperature probeSpecification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 22cm * 14cm * 8cm / 8.66inch * 5.51inch * 3.15inch Qty per Carton 134 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 134 pcs = 23718 pcs40HQ: 412 cartons * 134 pcs = 55208 pcs
£47.99
-
JCS900-2AE Two Axes Digital Readout Display Milling Lathe Machine, EU Plug, JCS900-2AE
Basic Functions: 1. zero clearing 2. Reset 3. mm/inch mode 4. ABS/INC 5. 200sets sub datum 6. Power off Memory; 7. Center of 1/2 8. Linear error compensation 9. Sleepping mode 10. Clear 200 sets Sdm datum; 11. Calculator 12. Drilling of circumference 13. Drilling of oblique line 14. Machining of inclined plane 15. Machining of circular arc 16. Lathe function(match) 17. Rectangular lumen gradual processing 18. Digital filtering (grinder machine ) 19. R function 20. Radius/Diameter function (lathe machine ) 21. Z+Y sum (lathe machine) Technical Parameters: 1. Voltage Range: AC 90V-250V/50HZ-60HZ 2. Power Consumption: 25VA 2. Input Signal: TTL square/RS422 3. Input Signal frequency: 100KHzSpecification: Package Weight One Package Weight 2.03kgs / 4.48lb One Package Size 32cm * 23cm * 15cm / 12.6inch * 9.06inch * 5.91inch Qty per Carton 8 Carton Weight 17.50kgs / 38.58lb Carton Size 62cm * 48cm * 34cm / 24.41inch * 18.9inch * 13.39inch Loading Container 20GP: 263 cartons * 8 pcs = 2104 pcs40HQ: 611 cartons * 8 pcs = 4888 pcs
£44.99
-
JCS900-3AE Three Axes Digital Readout Display Milling Lathe Machine, AU Plug, JCS900-3AE
Basic Functions: 1. zero clearing 2. Reset 3. mm/inch mode 4. ABS/INC 5. 200sets sub datum 6. Power off Memory; 7. Center of 1/2 8. Liner error compensation 9. Sleepping mode 10. Clear 200 sets Sdm datum 11. Calculator 12. Drilling of circumference 13. Drilling of oblique line 14. Machining of inclined plane 15. Machining of circular arc 16. Lathe function(match) 17. Rectangular lumen gradual processing 18. Digital filtering (grinder machine ) 19. R function 20. Radius/diameter function (lathe machine ) 21. Z+Z1 sum (lathe machine) Technical Parameters: 1. Voltage Range: AC 85V-250V/50HZ-60HZ 2. Power Consumption: 25VA 2. Input Signal: TTL square/RS422 3. Input Signal frequency: 100KHZSpecification: Package Weight One Package Weight 2.08kgs / 4.59lb One Package Size 32cm * 23cm * 15cm / 12.6inch * 9.06inch * 5.91inch Qty per Carton 8 Carton Weight 17.50kgs / 38.58lb Carton Size 62cm * 48cm * 34cm / 24.41inch * 18.9inch * 13.39inch Loading Container 20GP: 263 cartons * 8 pcs = 2104 pcs40HQ: 611 cartons * 8 pcs = 4888 pcs
£55.99
-
BSIDE BSIDE X2 Three-Mode Smart Multimeter Electric Pen Infrared Thermometer with Flashlight Lighting, X2
Features:1. The product has the test attributes of a voltage detector and a smart multimeter2. Non-contact slim design, easy to operate and carry3. EBTN super clear display, clear and easy to read4. Battery low voltage reminder, automatic shutdown5. With inductive dangerous voltage alarm, live/zero line distinction, live line breakpoint positioning, continuity check, flashlight functions, etc.6. With non-contact infrared thermometer, double insulation body material greatly improves safety standards7. With a large 2-inch EBTN display, LCD display and LED indicator, dual dangerous voltage warnings are clear at a glanceparameter:1. Dimensions: 160 x 28 x 31mm2. Safety level: CAT II 600V3. Alarm mode: sound, analog bar, light (red/yellow)4. Dual mode operation: low sensitivity, high sensitivity5. 8 LED indicators in 3 colors: automatic identification of high/medium/low voltage6. Power supply: 2 AAA batteries (not included)7. Net weight: 87 gramsPacking list:1 x Multimeter1 x manual1 x test cable1 x ToolkitSpecification: Package Weight One Package Weight 0.28kgs / 0.61lb One Package Size 20cm * 9cm * 4.5cm / 7.87inch * 3.54inch * 1.77inch Qty per Carton 40 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 42cm * 20cm / 18.5inch * 16.54inch * 7.87inch Loading Container 20GP: 675 cartons * 40 pcs = 27000 pcs40HQ: 1568 cartons * 40 pcs = 62720 pcs
£28.99
-
TOOLTOP TOOLTOP 2 In 1 DIY Oscilloscope Mini Multimeter, ET2010A
1. Bandwidth: 1MHz2. Real-time sampling rate: 2.5Msps3. Display: 320x240, white backlight4. Battery: AA x 3 (not included)5. Storage: 100 data/10 waveforms6. Fuse: 10A/250V7. Number of channels: 18. Vertical sensitivity range: 300mV- 1000V/div9. Time base range: 2.5us -10s/div10. Trigger mode: Auto / Single / Normal11. Trigger edge selection: rising edge / falling edge12. Auto sleep: no operation within 15 minutes13. Measurement function: Vp-p, Vavg, Vrms, Hz14. Input resistance: about 10 milliohms15. DC voltage: 400mV-600V16. AC voltage: 400mV-600V17. DC current: 4A-10A18. AC current: 4A-10A19. Resistance: 400.0 ohms-40.00 milliohms20. Capacitance: 51.2nF~100uF21. Frequency: 5Hz ~ 5MHz22. Diode: 1.5 V23. Same screen display: historical data and real-time data are displayed on the same screen24. Continuity test: resistance is less than 50 ohms, beep25. Intelligent protection, automatic range plus 10A fuse double protection26. REL effectively eliminates the influence of lead resistance and distributed capacitance on the measurement results27. Dimensions: 77x157x25.5mm28. Weight: 135gSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 21cm * 15cm * 6cm / 8.27inch * 5.91inch * 2.36inch Qty per Carton 20 Carton Weight 6.90kgs / 15.21lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 20 pcs = 11820 pcs40HQ: 1373 cartons * 20 pcs = 27460 pcs
£33.99
Sie haben 48 von 95 Produkten gesehen