Produkte
-
Waveshare ESP32-C5 Mini Dual-Band Wi-Fi 6 Development Board, 240MHz Single-Core Processor, with Pinheader, Without Pinheader
1. Powered by the ESP32-C5-MINI-1 series module as the main controller, featuring a RISC-V 32-bit single-core processor with a clock speed of up to 240MHz.2. Integrated with 320KB ROM, 384KB HP SRAM, 16KB LP SRAM, and 4MB Flash memory.3. Supports 2.4GHz and 5GHz dual-band Wi-Fi 6, Bluetooth 5 (LE), and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication with excellent RF performance.4. Equipped with a USB Type-C interface with reversible plug orientation for convenient power supply, development, and debugging.5. Onboard MP1605GTF-Z high-efficiency DC-DC power chip supporting a maximum load current of up to 2A.6. Onboard ETA6098 power management circuit supporting lithium battery power supply, charging status indication, and battery voltage sampling.7. Rich peripheral interfaces including USB, UART, I2C, SPI, ADC, PWM, etc., enabling flexible implementation of various functions.8. Castellated hole design allows direct soldering and integration onto custom user-designed baseboards.9. Supports multiple low-power operating modes to balance communication range, data rate, and power consumption for various application scenarios.Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 3.50kgs / 7.72lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 120 pcs = 64320 pcs40HQ: 1244 cartons * 120 pcs = 149280 pcs
£7.99 - £8.99
-
Waveshare Waveshare ESP32-C5-Zero Mini Development Board With RISC-V 32-Bit Processor, No Pin Header, Pin Header Soldering
1. The ESP32-C5-Zero is a compact multi-protocol development board based on the ESP32-C5-HF4, integrating wireless communication, USB interface and onboard peripherals, suitable for embedded and IoT applications.2. Equipped with a 32-bit RISC-V processor with a maximum frequency of 240 MHz.3. Integrated with 384KB SRAM, 320KB ROM and 4MB Flash.4. Equipped with dual-band Wi-Fi at 2.4GHz and 5GHz, Bluetooth 5.0 (LE), and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, featuring excellent RF performance.The board includes an onboard antenna switching chip, allowing the use of the onboard antenna or an external antenna (IPEX-1).5. Utilizes a USB Type-C interface that is both front and back plug-and-play.6. Exports a rich set of peripheral interfaces, with a stamp hole design, facilitating soldering and integration onto a user-designed baseboard.7. Supports multiple low-power operating modes, enabling flexible adjustment of communication range, data rate, and power consumption balance to meet the power consumption requirements of various application scenarios.8. Supports ESP-IDF, Arduino, and MicroPython, along with a complete SDK and open-source documentation tutorials, facilitating quick integration into applications.Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 6cm * 6cm * 4cm / 2.36inch * 2.36inch * 1.57inch Qty per Carton 384 Carton Weight 16.50kgs / 36.38lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 384 pcs = 158208 pcs40HQ: 958 cartons * 384 pcs = 367872 pcs
£6.99 - £7.99
-
WAVESHARE WAVESHARE ESP32-P4-Core Development Board, Equipped With RISC-V 32-Bit Dual-Core And Single-Core Processors, Supports USB OTG 2.0 HS, With Soldered Pin Header, No Soldered Pin Header
1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors 2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM 3. Powerful image and audio processing capabilities; image and audio processing interfaces include a JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H.264 video encoder 4. 32MB PSRAM stacked within the chip package; 32MB NOR Flash integrated into the module 5. On-board interfaces for common peripherals such as MIPI-CSI, MIPI-DSI, and USB 2.0 OTG 6. 2x20 pin headers on the board; GPIO pads on the bottom 7. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection, enabling access permission management (APM) and privilege separation 8. Dimensions: approximately 5.8 x 2.9 cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 9cm * 6cm * 3cm / 3.54inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 6.50kgs / 14.33lb Carton Size 47cm * 26cm * 15cm / 18.5inch * 10.24inch * 5.91inch Loading Container 20GP: 1454 cartons * 200 pcs = 290800 pcs40HQ: 3377 cartons * 200 pcs = 675400 pcs
£12.99 - £13.99
-
WAVESHARE WAVESHARE ESP32-P4-Module Core Board Supports 2.4GHz Wi-Fi And Bluetooth 5.3, 16MB, 32MB, 16MB Onboard IPEX Connector, 32MB Onboard IPEX Connector
1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. Integrated ESP32-C6 chip supporting 2.4GHz Wi-Fi and 802.11 b/g/n/ax3. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, and 8KB TCM4. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder5. On-chip stacked 32MB PSRAM, with optional 16MB/32MB Nor Flash integrated off-chip6. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for Access Permission Management (APM) and privilege separation7. Suitable for image recognition, smartwatches, smart industry, Human-Machine Interfaces (HMI), voice recognition, and IoT applicationsParameters1. Main controller chip: ESP32-P4NRW322. RF chip: ESP32-C6H83. PSRAM size: 32MB4. Flash size: 16MB / 32MB (Optional)5. RF bands: 802.11 b/g/n/ax; 2.4GHz Wi-Fi; Bluetooth 5.36. Operating voltage: 3.3V7. Interface type: Pin header, 1mm pitch8. Size: about 2.5 x 2.5cmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 4cm * 4cm * 2cm / 1.57inch * 1.57inch * 0.79inch Qty per Carton 1728 Carton Weight 36.00kgs / 79.37lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 1728 pcs = 711936 pcs40HQ: 958 cartons * 1728 pcs = 1655424 pcs
£10.99 - £11.99
-
WAVESHARE WAVESHARE ESP32-P4-Module Core Board, Based On ESP32-P4 And ESP32-C6 Dual-Chip Design, 16MB
1. Main controller chip: ESP32-P4NRW32 2. RF chip: ESP32-C6H8 3. PSRAM size: 32MB 4. Flash size: 16MB / 32MB5. RF band: 802.11 b/g/n/ax; 2.4GHz Wi-Fi; Bluetooth 5.3 6. Operating voltage: 3.3V 7. Connector type: Pin header, 1mm pitch8. Size: Approx. 25 x 25 x 3.3mmFeatures:1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. Integrated ESP32-C6 chip, supporting 2.4GHz Wi-Fi and 802.11 b/g/n/ax3. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, and 8KB TCM4. Powerful image and audio processing capabilities; image and audio processing interfaces include a JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H.264 video encoder5. 32MB PSRAM stacked within the chip package, with 16MB / 32MB NOR Flash integrated outside the package (optional)6. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection, enabling access permission management (APM) and privilege separationSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 760 Carton Weight 16.20kgs / 35.71lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 760 pcs = 313120 pcs40HQ: 958 cartons * 760 pcs = 728080 pcs
£10.99
-
WAVESHARE WAVESHARE ESP32-P4-WIFI6 7-Inch Five-Point Touchscreen Development Board 1024x600 Resolution, Basic, Includes OV5647 Camera
Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 23.30kgs / 51.37lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs40HQ: 1197 cartons * 48 pcs = 57456 pcs
£50.99 - £59.99
-
WAVESHARE WAVESHARE ESP32-P4-WIFI6-POE-ETH Development Board Supports Power Over Ethernet (PoE), Basic Package
1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module, making the development boards power supply more flexible.12. Only one network cable is needed to connect to a PoE device, enabling both networking and power supply for the ESP32-P4-WIFI6-POE-ETH.13. Dimensions: 55x68mm14. Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 9.80kgs / 21.61lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs40HQ: 1439 cartons * 72 pcs = 103608 pcs
£26.99
-
WAVESHARE WAVESHARE ESP32-P4-WIFI6-POE-ETH Development Board Supports Power Over Ethernet (PoE), Package C
1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module provides more flexible power supply options for the development board.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve both networking and power supply.13. Dimensions: 55x68mmRaspberry Pi camera module B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focusPackage contents:ESP32-P4-WIFI6-POE-ETH x 1SH1.0 4PIN connecting cable (approx. 150mm) x 21217 cavity speaker 8Ω 2W x 12.4G antenna x 1RPi camera (B) x 1FFC 15PIN ribbon cable x 1Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 15.50kgs / 34.17lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs40HQ: 1439 cartons * 72 pcs = 103608 pcs
£37.99
-
WAVESHARE WAVESHARE ESP32-P4-WIFI6-POE-ETH Development Board Supports Power Over Ethernet (PoE), Package D
1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, providing stable connection and efficient transmission.11. Integrated PoE module makes the development boards power supply more flexible.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve networking and power supply.13. Uses an IPS full-laminated tempered glass panel with a 178-degree wide viewing angle, supports ten-point touch, and provides a clear picture and excellent visual experience.14. Dimensions: 55x68mmRaspberry Pi camera type B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focus1. Screen model: 10.1-DSI-TOUCH-A2. Resolution: 800 x 1280 (H x V)3. Communication interface: MIPI-DSI (2-lane)4. Brightness: 400cd/m25. Touch chip: GT92716. Dimensions: 147.0 × 239.0 (mm)7. Display size: 135.36 × 216.58 (mm)8. Pixel size: 0.1692 (H) × 0.1692 (V) (mm)9. Contrast ratio: 800:1Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- 10.1-inch display x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- RPi camera (B) x 1- FFC cable - 15-pin ribbon cable x 1- MIPI-DSI cable 12cm x 1- MX 1.25 2-pin to 2.54 3-pin connector cable x 1- FFC cable 22-pin 200mm (reverse direction) x 2- MX1.25 2-pin to MX1.25 4-pin cable approximately 150mm x 1- MX1.25 2-pin to SH1.0 2-pin connector cable approximately 80mm x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable approximately 1 meter x 1- Copper standoffs pack x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 23cm * 16cm * 7cm / 9.06inch * 6.3inch * 2.76inch Qty per Carton 16 Carton Weight 9.10kgs / 20.06lb Carton Size 48cm * 34cm * 30cm / 18.9inch * 13.39inch * 11.81inch Loading Container 20GP: 544 cartons * 16 pcs = 8704 pcs40HQ: 1264 cartons * 16 pcs = 20224 pcs
£87.99
-
Waveshare Waveshare ESP32-S3 1U-N16R8 Microcontroller 2.4GHz Wi-Fi Development Board 240MHz Dual Core Processor, Without Header, With Pre-soldered Headers
1. Adopts ESP32-S3-WROOM series module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz2. Integrates 512KB SRAM and 384KB ROM; 16MB Flash (Quad SPI, DIO/QIO modes) and 8MB PSRAM.3. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance.4. Type-C connector, easier to use5. Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface6. Rich peripheral interfaces, compatible with the pinout of ESP32-S3-DevKitC-1 development board, offers strong compatibility and expandability7. Castellated module allows soldering directly to carrier boards8. Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenariosSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 90 Carton Weight 5.60kgs / 12.35lb Carton Size 38cm * 42cm * 32cm / 14.96inch * 16.54inch * 12.6inch Loading Container 20GP: 522 cartons * 90 pcs = 46980 pcs40HQ: 1212 cartons * 90 pcs = 109080 pcs
£11.99 - £12.99
-
Waveshare Waveshare ESP32-S3 AIoT Camera Development Board, With GC0308 Camera, With GC2145 Camera, With OV3660 Camera, With OV5640 Camera
1. This product is an AI development board based on ESP32-S3, integrating camera interface (DVP), SPI/QSPI display interface, and audio capture and playback functions, balancing low cost, high performance, and low power consumption to meet diverse smart terminal development needs. It supports integration with online AI platforms such as Xiaozhi/Doubao/DeepSeek, enabling human-computer interaction functions like voice dialogue and Q&A recognition. It also provides an Edge Impulse object detection example supporting real-time and multi-object recognition, suitable for rapid development of AI voice interaction, edge vision detection, HMI screen applications, and smart camera products. 2. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a maximum main frequency of 240MHz. 3. Built-in 512KB SRAM, 384KB ROM, onboard 8MB PSRAM and 16MB Flash. 4. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication with excellent RF performance. 5. Dual microphone array supporting noise reduction and echo cancellation for high-quality voice interaction. 6. Expansion and interfaces: --SPI/QSPI LCD display interface --24PIN DVP camera interface --USB, I2C, and UART interfaces accessible. 7. Onboard lithium battery charging circuit supports 3.7V lithium battery power supply. 8. Reserved 2 user-defined buttons. 9. The overall solution is highly integrated with rich interfaces, suitable for rapid prototyping and application deployment of AIoT smart terminal products.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 12.60kgs / 27.78lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 96 pcs = 55968 pcs40HQ: 1354 cartons * 96 pcs = 129984 pcs
£16.99 - £22.99
-
WAVESHARE WAVESHARE ESP32-S3 Control Board With RS485 And CAN Communication Interfaces, Supports Wi-Fi / Bluetooth, Built-In Multiple Protection Circuits, External Antenna, Onboard Antenna
1. Antenna Interface: On-board surface-mount ceramic antenna / external antenna 2. Microcontroller: ESP32-S3R8 chip3. Wireless Communication: 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE) 4. Interface: Type-C5. Supply Voltage: 5V 6. Interface Functions: Device power supply, USB communication, firmware download, etc. 7. Isolated RS485 Communication Interface:- Interface Type: Terminal blocks - Direction Control: Automatically controlled via master hardware flow settings - Interface Protection: TVS diode protection, surge protection, and ESD protection - Matching Resistor: Default NC; 120R matching resistor reserved; can be enabled via jumper cap 8. Isolated CAN Communication Interface:- Interface Type: Terminal Blocks- Direction Control: Hardware automatically detects and controls data transmission direction - Interface Protection: Provides TVS diode protection, surge protection, and ESD protection - Matching Resistor: Default NC, 120R matching resistor reserved, can be enabled via jumper cap9. Indicator Lights:- PWR: Power indicator; lights up red when connected to USB and voltage is detected- RS485 Indicator: Lights up green when data is transmitted from the RS485 interface; lights up blue when data is received from the RS485 interface - CAN Indicator: Flashes when data is being transmitted via the CAN interface 10. Supply Voltage Range: 7V – 36V 11. Enclosure: DIN-rail mounting enclosure12. Dimensions: Approx. 9.16 x 2.33 x 5.87 cmFeatures:1. Based on the ESP32-S3 microcontroller, with a built-in Xtensa 32-bit LX7 dual-core processor operating at up to 240 MHz2. Integrates dual-mode 2.4 GHz Wi-Fi and Bluetooth 5 (LE) wireless communication with excellent RF performance3. On-board isolated RS485 interface, facilitating the connection of various RS485 Modbus industrial expansion modules or sensors4. On-board isolated CAN interface, facilitating the connection of various CAN devices 5. On-board pin header interface, allowing connection to other devices 6. On-board USB Type-C interface, usable for power supply and download/debugging, facilitating development7. On-board terminal block power supply interface, supporting a wide voltage range of 7V to 36V, suitable for industrial power supply applications 8. On-board RTC clock chip, supporting scheduled tasks 9. On-board digital isolation prevents external signals from interfering with the control chip10. On-board integrated power isolation provides a stable isolated voltage; the isolated side requires no additional power supply11. On-board RS485 transmit/receive indicator lights and CAN activity indicator lights make it easy to monitor the device’s operating status12. DIN-rail mounting enclosure facilitates installation and use; the enclosure provides added safetySpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 36cm * 20cm / 16.54inch * 14.17inch * 7.87inch Loading Container 20GP: 881 cartons * 100 pcs = 88100 pcs40HQ: 2047 cartons * 100 pcs = 204700 pcs
£18.99
-
WAVESHARE WAVESHARE ESP32-S3 Development Board Equipped With 3.49 Inch IPS Capacitive Touchscreen, Model A With Battery, Model A Without Battery
LCD screen parameters:1. Display panel: LCD2. Display size: 3.49 inches3. Display resolution: 172 x 6404. Display colors: 16.7M5. Display brightness: 350 cd/m26. Contrast ratio: 1200:17. Display Interface: QSPI8. Driver chip: AXS15231B9. Touch interface: I2C10. Touch type: capacitive sensing11. Size: model A about 9.269 x 3.48 x 3.18cm, model B about 9.269 x 3.48 x 2.28cmFeatures:1. Powered by ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, clocked up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antennas3. Incorporates 512KB SRAM and 384KB ROM, with 8MB PSRAM stacked and external 16MB Flash4. Onboard 3.49-inch capacitive touch HD IPS display, 172 × 640 resolution, 16.7M colors, clearly displays color images5. Equipped with dual microphone array, enabling audio algorithms like noise reduction and echo cancellation, suitable for precise voice recognition and near-field/far-field voice wake-up applications6. Integrated AXS15231B display driver IC communicating via QSPI and I2C interfaces7. Onboard QMI8658 six-axis IMU (3-axis accelerometer, 3-axis gyroscope) for detecting device orientation and step counting8. On-board PCF85063 RTC chip for convenient implementation of real-time clock functionality9. Two customizable side buttons (PWR, BOOT) for developing user-defined functions10. On-board 3.7V MX1.25 lithium battery charge/discharge interface or 18650 battery holder11. Onboard Micro SD card slot for flexible storage expansion and rapid data transfer, suitable for data logging and media playback, simplifying circuit design12. Reserved 22-pin 2.54mm pitch through-hole pads for connecting external modules or functional expansion, enhancing development flexibilitySpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 90 Carton Weight 28.00kgs / 61.73lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 90 pcs = 37080 pcs40HQ: 958 cartons * 90 pcs = 86220 pcs
£31.99 - £33.99
-
Waveshare Waveshare ESP32-S3 Development Board With 0.85-Inch LCD 128×128, Dual Mic Array, Wi-Fi/BLE 5, AI Support, ESP32-S3-LCD-0.85
1. The ESP32-S3-LCD-0.85 is a microcontroller development board supporting 2.4GHz Wi-Fi and Bluetooth BLE 5. It features a small square-box molded plastic enclosure, compact and aesthetically pleasing with excellent texture. On-board peripherals include a 0.85-inch IPS color LCD display, Micro SD card slot, 8 RGB colorful lights, and a low-power audio codec chip, facilitating development for multimedia and interactive applications. Leveraging these hardware resources, the product enables functions like image display, audio playback, and lighting effects control. It is suitable for rapid prototyping and can be embedded into end products for personalized expansion and secondary development.2. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor, with a clock frequency up to 240MHz.3. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an on-board antenna.4. Built-in 512KB SRAM, 384KB ROM, 8MB Flash, and 8MB PSRAM.5. Uses a Type-C interface, enhancing user convenience and device compatibility.6. On-board 0.85-inch LCD screen, 128 x 128 resolution, 65K colors.7. On-board 8 ring-shaped RGB colorful lights, programmable for various dynamic lighting effects.8. On-board 3.7V MX1.25 lithium battery charge/discharge interface.9. Exposed I2C, UART, and other solder pads allow for external device connections and debugging, enabling flexible peripheral configuration.10. On-board Micro SD card slot provides expanded storage, fast data transfer, and flexibility for data logging and media playback, simplifying circuit design.11. On-board resources include the ES8311 audio codec chip, dual-MIC microphone module, and others. LCD Screen Parameters:1. Operating voltage 3.3V/5V 2. Display size 15.21 x 15.21 mm 3. Display resolution 128 x 128 pixels 4. Display color: 65K 5. Display panel: IPS 6. Pixel pitch 39.6 x 118.8 um 7. Interface type: 4-wire SPI8. Driver IC: GC9107Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 10.70kgs / 23.59lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 120 pcs = 69960 pcs40HQ: 1354 cartons * 120 pcs = 162480 pcs
£14.99
-
WAVESHARE WAVESHARE ESP32-S3 ETH Development Board, 10/100Mbps RJ45 Ethernet Port, Wi-Fi & Bluetooth Support, 240MHz Dual Core Processor, Single Board No Soldered Pin Header, Mainboard+OV5640 Camera No Soldered Pin Header ...
1. Based on the high-performance ESP32-S3R8 chip, featuring an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz 2. Integrates 512 KB of SRAM and 384 KB of ROM, with 8 MB of PSRAM and 16 MB of Flash 3. Supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), with a built-in antenna and support for external antennas4. On-board W5500 Ethernet chip, providing 10/100Mbps network connectivity via the SPI interface5. Supports an external PoE module for Power over Ethernet (compliant with the IEEE 802.3af standard) 6. On-board camera interface supporting mainstream cameras such as the OV5640, suitable for image and video capture7. On-board USB Type-C port supporting power delivery, debugging, and firmware downloads for more convenient development8. On-board Micro SD card slot supporting external SD cards for storing images and files9. On-board Pico-compatible interface providing extensive peripheral expansion options with strong compatibility10. Dimensions: Approximately 7.28 x 2.1 cmOV5640 Camera Specifications:1. Sensor size: 1/4 inch 2. Focal length: 4.1 mm 3. Aperture: f/2.8 4. Field of View: 68 degrees (D) x 55 degrees (H) x 42 degrees (V) 5. Maximum Resolution: 2592 x 1944 6. Output Interface: DVP 7. Output Formats: RGB565, YUV/YCbCr422Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 7cm * 3cm / 4.33inch * 2.76inch * 1.18inch Qty per Carton 200 Carton Weight 8.50kgs / 18.74lb Carton Size 37cm * 30cm * 24cm / 14.57inch * 11.81inch * 9.45inch Loading Container 20GP: 1001 cartons * 200 pcs = 200200 pcs40HQ: 2323 cartons * 200 pcs = 464600 pcs
£16.99 - £25.99
-
Waveshare Waveshare ESP32-S3 Industrial Control Board With 8-Channel Wi-Fi Network Relays, Standard Network Port, PoE Port
1. Microcontroller: ESP32-S3 (default module: ESP32-S3-WROOM-1U-N16R8) 2. Wireless communication: 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5, BLE 3. Interface type: USB Type-C 4. Supply voltage: 5V 5. Functions: device power supply, USB communication, firmware download, etc. 6. Interface types: standard ethernet RS485; PoE ethernet CAN 7. Interface form: terminal block 8. Direction control: hardware automatically detects and controls data transmission direction 9. Interface protection: equipped with TVS diode protection, surge and ESD protection 10. Matching resistor: Default NC, reserved 120Ω matching resistor, can be enabled via jumper cap 11. Input channels: 8 channels 12. Input voltage range: 5V–36V 13. Input type: passive input / active input (NPN or PNP type) 14. Isolation type: bidirectional optocoupler isolation 15. Relay channels: 8 channels 16. Contact type: one normally open, one normally closed 17. Isolation type: optocoupler isolation 18. Indicator LEDs: - RGB: colorful LED, customizable display colors - PWR: power indicator; turns red when USB is connected and voltage detected - TXD: transmit indicator; turns green when data is sent via RS485/CAN interface - RXD: receive indicator; turns blue when data is received via RS485/CAN interface 19. Operating voltage range: 7V–36V 20. Housing: rail-mounted ABS protective enclosure 21. Dimensions: 175 x 90 x 40 mm 22. Based on the ESP32-S3 microcontroller, featuring an integrated Xtensa 32-bit LX7 dual-core processor with a maximum frequency of 240MHz 23. Integrated 2.4GHz Wi-Fi and low-power Bluetooth (Bluetooth LE) dual-mode wireless communication with excellent RF performance 24. Uses high-quality relays supporting load up to 10A 250V AC or 10A 30V DC 25. Digital inputs with bidirectional optocoupler isolation, supporting both passive and active digital inputs; relays support联动 mode control for input signals 26. Onboard isolated RS485 interface enables easy expansion with various RS485 Modbus industrial modules or sensors 27. Onboard header pins allow connection to other devices 28. Onboard USB Type-C interface supports power supply and firmware download/debugging, convenient for development 29. Onboard terminal block power input supports wide voltage range from 7V to 36V, suitable for industrial power applications 30. Onboard RTC clock chip supports scheduled tasks 31. Onboard W5500 Ethernet chip provides 10/100Mbps network connectivity via SPI interface 32. PoE Ethernet version supports external PoE module for Power over Ethernet functionality (compliant with IEEE 802.3af standard) 33. Onboard optocoupler isolation prevents interference from high-voltage circuits connected to relays affecting the control chip 34. Onboard digital isolation prevents external signal interference to the control chip 35. Integrated onboard power isolation provides stable isolated voltage; no additional power supply required at the isolated side 36. Built-in Micro SD card slot for external SD card storage of images or files 37. Onboard buzzer, RGB LED, power, and RS485 transmit/receive indicator lights to easily monitor device operation status 38. Rail-mounted ABS protective housing for convenient installation and safer operationSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 20cm * 11cm * 6cm / 7.87inch * 4.33inch * 2.36inch Qty per Carton 30 Carton Weight 7.10kgs / 15.65lb Carton Size 42cm * 35cm * 32cm / 16.54inch * 13.78inch * 12.6inch Loading Container 20GP: 566 cartons * 30 pcs = 16980 pcs40HQ: 1316 cartons * 30 pcs = 39480 pcs
£46.99 - £50.99
-
Waveshare Waveshare ESP32-S3 LoRa Development Board With LR1121 3rd-Gen RF Chip, HF Version, LF Version, HF Kit, LF Kit
1. Equipped with the Xtensa 32-bit LX7 dual-core processor, with a main frequency up to 240MHz, delivering robust performance; supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), meeting diverse wireless connectivity needs 2. Built-in 512KB SRAM, 384KB ROM, stacked 4MB Flash, and 2MB PSRAM, offering abundant resources 3. Adopts stamp hole design for enhanced integration, facilitating independent baseboard design 4. Rich peripheral interfaces including 4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, and 2 × ADC 5. Utilizes LR1121, the third-generation low-power LoRa transceiver from Semtechs LR11xx series 6. Supports Sub-GHz (150MHz to 960MHz), S-band (2.0GHz to 2.1GHz), and 2.4GHz ISM frequency bands 7. Connects to cloud platforms via LoRa or LoRaWAN protocols through gateways to build low-power wide-area networks 8. Supports LoRa, (G)FSK, and LR-FHSS modulation, compatible with SX126X/SX127X frequency bands for seamless product upgrades 9. Integrated AES-128 encryption engine for enhanced data security; onboard TCXO crystal ensures frequency stability under high/low-temperature conditions 10. Suitable for IoT applications including industrial telemetry, smart homes, environmental monitoring, and remote data acquisition 11. Includes C language sample programs and user manuals for streamlined development and rapid deployment 12. Operating frequency bands: LF: 410MHz to 510MHz; HF: 850MHz to 930MHzSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 96 pcs = 47040 pcs40HQ: 1137 cartons * 96 pcs = 109152 pcs
£15.99 - £16.99
-
Waveshare Waveshare ESP32-S3 Microcontroller 2.4GHz Wi-Fi Development Board ESP32-S3-WROOM-1-N8R8 Module, 24263, 24363
1. ESP32-S3-DEV-KIT-N8R8 is a microcontroller development board with a small size and a variety of digital interfaces.2. In terms of software, you can choose ESP-IDF, Arduino, MicroPython and other development environments for development, so that you can get started easily and quickly, and apply them to products.3. Using ESP32-S3-WROOM-1-N8R8 module, equipped with Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz4. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory5. Integrated 2.4GHz Wi-Fi and Bluetooth Low Energy (Bluetooth LE) dual-mode wireless communication with superior RF performance6. Using the USB Type-C interface, no need to tangle with the front and back plugs7. The onboard CH343 and CH334 chips can meet the development and use requirements of USB and UART through a Type-C interface8. Lead out rich peripheral interfaces, pin compatible with ESP32-S3-DevKitC-1 development board, strong compatibility and expandability9. Stamp hole design, can be directly welded and integrated into the bottom plate designed by the user10. Support a variety of low-power working states, adjust the balance between communication distance, data rate and power consumption, and meet the power consumption requirements of various application scenariosSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs40HQ: 1031 cartons * 500 pcs = 515500 pcs
£8.99 - £9.99
-
Waveshare Waveshare ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board Dual-core Processor, 23803
1. Support development environment, such as ESP-IDF, Arduino, MicroPython, etc.2. 240MHz Xtensa 32-bit LX7 dual-core processor3. Easy to integrate, 32-bit LX7, 2MB PSRAM, wireless network, dual-core processor4. Using ESP32-S3R2 chip, Xtensa 32-bit LX7 dual-core processor, running frequency 240mhz5. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB flash memory6. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with excellent RF performance7. Type-C connector, more convenient to use8. The onboard CH343 and CH334 chips can meet the needs of USB and UART development through the Type-C interface9. Onboard DC-DC chip MP28164, high-efficiency DC-DC step-down boost chip, the load current can reach 2A10. 27 x multi-function GPIO pins, configurable pin functions, allowing flexible development and integration11. Abundant external interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-16-bit camera interface), LCD interface (8-16-bit parallel RGB, 18080, MOTO6800), etc., Flexible realization of various functions12. Castellated modules allow direct soldering to the carrier board13. Support a variety of low-power working states, adjustable communication distance, data rate and power consumption balance, to meet the power consumption requirements of various application scenarios14. Support the ecosystem of Raspberry Pi Pico expansion board, suitable for artificial intelligence loT application development15. Support ESP-IDF, Arduino, MicroPython comprehensive SDK, development resources, tutorials, help you get started easily16. ESP32-S3 is specially designed for AloT applications, using Xtensa 32-bit LX7 dual-core processor with a frequency up to 240 MHz, powerful aluminum computing capability and reliable security features17. WIFI and BLE 5 support, ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 B/G/N) and 40mhz bandwidth to support its Bluetooth low energy subsystem to support Bluetooth 5 (LE) and Bluetooth Mesh18. ESP32-S3: Xtensa 32-bit LX7 dual-core processor19. 2.4G monopole ceramic antenna20. W25Q128JVSIQ: 16MB Flash21. Start button: press to enter download mode when reset22. CH334F: USB HUB controller23. CH343P: USB to UART chip24. MP28164: High-efficiency DC-DC step-down boost chip25. Support more Pico expansion modules: Eval-Board, 3.5-inch LCD, 1.3-inch OLED, 8-segment LED, e-paper, NB-IoT module, GPIO expander, sensor module, RTC module, UPS moduleSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 42cm * 42cm / 20.47inch * 16.54inch * 16.54inch Loading Container 20GP: 290 cartons * 500 pcs = 145000 pcs40HQ: 674 cartons * 500 pcs = 337000 pcs
£8.99
-
Waveshare Waveshare ESP32-S3 RGB Matrix Driver Board Onboard Dual Microphones Array, Supports 2.4 GHz Wi-Fi And Bluetooth 5, ESP32-S3 RGB Matrix
1. The ESP32-S3-RGB-Matrix is a high-performance, highly integrated LED matrix panel driver board. It is suitable for HUB75 interface RGB matrix panels and related embedded applications. Based on the ESP32-S3 microcontroller, it integrates large-capacity Flash storage, RTC chip, IMU, TF card slot, low-power audio codec chip, dual microphones, and so on. It also provides reserved interfaces such as USB, UART, I2C, and GPIO, offering strong scalability and enabling users to quickly develop and integrate it into practical applications.3. Supports 2.4 GHz Wi-Fi and Bluetooth 5 (BLE) dual-mode communication4. Includes 512KB SRAM and 384KB ROM; integrates 32MB Flash and 16MB PSRAM to meet storage requirements across various scenarios5. Compatible with the full range of Waveshare Matrix-RGB panel sizes; capable of smoothly running graphical interface programs like LVGL6. Onboard ES7210 echo cancellation chip for enhanced voice processing performance7. Onboard ES8311 low-power audio codec chip, supporting high-quality audio input and output8. Equipped with a dual-microphone array supporting noise reduction and echo cancellation algorithms; suitable for applications such as voice recognition and wake-up9. Onboard speaker interface for audio output; allows for direct connection to a speaker10. Integrates the QMI8658 6-axis IMU (3-axis accelerometer + 3-axis gyroscope) for attitude detection11. Integrates the SHTC3 temperature and humidity sensor for precise environmental monitoring12. Onboard Micro SD card slot for storing images, audio, and various data files, facilitating easy data read/write operations13. Onboard PCF85063 RTC chip and reserved SH1.0 battery interface; supports timekeeping during power outages14. Reserved GPIO expansion interface for peripheral expansion and custom functionality, catering to diverse development needs15. Dual power supply interface design; supports stable operation of up to six 64×64 Matrix-RGB panels and allows for cascading expansion to meet large-format display requirements16. Onboard USB Type-C interface for power supply, programming, and debugging17. Onboard RST and BOOT buttons; the BOOT button supports custom functions, enhancing development flexibilitySpecifications:1. Power supply voltage: 5V2. Maximum current capacity: 10A3. Supported resolutions: 64 × 64 | 64 × 32 | 80 × 40 | 96 × 484. Interface type: HUB755. Maximum resolution (cascaded): 6 × 64 × 646. Operating temperature range: -40 ~ +85 degrees Celsius7. Product dimensions: 50 × 42 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 13.10kgs / 28.88lb Carton Size 34cm * 42cm * 32cm / 13.39inch * 16.54inch * 12.6inch Loading Container 20GP: 583 cartons * 120 pcs = 69960 pcs40HQ: 1354 cartons * 120 pcs = 162480 pcs
£25.99
-
WAVESHARE WAVESHARE ESP32-S3 RS485 Development Board, LX7 240MHz Dual-Core Processor, WLED Strip Control, 35580
1. Microcontroller: ESP32-S3-WROOM-1-N16R8 2. Antenna Interface: On-board PCB antenna 3. Wireless Communication: 2.4 GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (BLE) 4. Input Voltage: Supply Range: 5 V – 24 V 5. WLED Light Output:- Maximum Output Current: 8 A (adequate heat dissipation required) - Output Channels: 2 LED output channels (GPIO2, GPIO16) - Supported LED Strips: WS2812B / WS2811 / SK6812 / TM1814 / SM16704 / APA102 / SK9822 / monochrome LED strips, etc. - Control Methods: WLED open-source firmware (web-based control); supports color, brightness, dynamic effects, zone control, scene presets, and other functions 6. USB Interface:- Interface Type: USB Type-C - Supply Voltage: 5V - Functions: USB communication, firmware download, etc. 7. Isolated RS485 Communication Interface:- Interface Type: Terminal blocks - Direction Control: Automatic control via master hardware flow settings - Interface Protection: Provides TVS diode protection, surge protection, and ESD protection - Matching Resistor: Default NC; 120R matching resistor reserved; can be enabled via jumper cap 8. Indicator Lights:- PWR: Power indicator; lights up red when connected to USB and voltage is detected - RS485: RS485 indicator: Lights up green when data is transmitted from the RS485 interface via TXD; lights up blue when data is received from the RS485 interface via RXD 9. Enclosure: DIN-rail mounting enclosure10. Dimensions: Approx. 8.19 x 5.4 x 3.2 cm Features:1. Based on the ESP32-S3-WROOM-1-N16R8 module, featuring an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz2. Integrates 2.4 GHz Wi-Fi and Bluetooth 5 (LE) wireless communication, facilitating the development of wireless control, device networking, and IoT applications3. Equipped with 16 MB of Flash and 8 MB of PSRAM, providing ample storage and runtime capacity for lighting control, audio processing, and complex application development4. On-board LED strip data output interface; through 5V level conversion, it can connect to a variety of digital LED strips, facilitating the development of WLED, ambient lighting, and personalized lighting effects5. Integrated isolated RS485 communication interface, facilitating communication with devices such as sensors, PLCs, and Modbus systems6. On-board RS485 transmit/receive status indicator lights, facilitating monitoring of data transmission/reception and program debugging7. On-board integrated isolated power supply provides stable isolated voltage; no additional power supply is required for the isolated side8. Integrated ES7210 audio ADC and ES8389 audio codec support multi-channel microphone input and stereo audio output, enabling development of AI voice and voice interaction applications9. On-board 3.5mm audio jack and PH2.0 4-pin speaker connector, facilitating the development of audio input/output applications10. Supports a wide voltage range of 5–24V11. On-board Type-C port for program upload and debugging12. Provides multiple sets of GPIO expansion ports and user buttons, facilitating the connection of sensors, actuators, and other peripherals for functional expansion13. Supports development environments such as ESP-IDF and Arduino, with accompanying example programs and development resources to facilitate quick setup and secondary development14. Equipped with a rail-mounted protective enclosure, suitable for both development and debugging as well as installation in actual projectsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 7cm * 5cm / 4.72inch * 2.76inch * 1.97inch Qty per Carton 100 Carton Weight 13.00kgs / 28.66lb Carton Size 45cm * 32cm * 30cm / 17.72inch * 12.6inch * 11.81inch Loading Container 20GP: 617 cartons * 100 pcs = 61700 pcs40HQ: 1432 cartons * 100 pcs = 143200 pcs
£24.99
-
WAVESHARE WAVESHARE EyeLink-RC-S1 Octa-Core CPU Onboard 5.5-Inch Handheld Ground Station
1. Communication distance (without interference or obstruction): 15KM MAX2. Channels: 13 physical channels; 16 communication channels3. Data transmission support for flight Controllers: Open-source flight controllers such as PIX, APM, etc.; Boying Paladin v2; Jiyi K3A Pro / K++; Weike Zhifei V7AG4. Video transmission support for ground stations: QGroundControl; MissionPlanner; Jiyi IFLY / Flight Control Manager; Boying Agriculture; Weike Zhifei V7Pro Ground Station5. 15KM wireless digital video transmission, dual-channel full HD video real-time display6. Lightweight handheld ground station equipped with a 5.5-inch high-definition high-brightness display, with a brightness of up to 1000 nits, still clearly displaying ground station information and high-definition video transmission images even in direct sunlight outdoors.7. Equipped with a qualcomm octa-core high-performance CPU, easily hard-decoding H.264/H.265, 1080P 60fps video streams, and capable of running various ground station software at high speed.8. Equipped with an R1M card recording high-definition camera interface, plug-and-play, real-time image reading, providing a wider and clearer field of view.Ground station1. Display device: 5.5-inch 1080P High-definition High-brightness LCD Touch Display2. System configuration: Android 9.0, 2G RAM, 16G Storage3. Dimensions: (Antenna folded) 189.09 x 137.95 x 69.72 (mm)4. Weight: 850g5. Battery capacity and type: 10200mAh, 7.4V 2S Lithium-ion battery6. Fast charging protocol: PD 20W7. Charging time: 5h (20W fast charging)8. Operating time: 13h9. Functional interfaces:- Charging: Type-C- Firmware upgrade: DATA (4PIN)- - Mobile network: SIM card slot- External storage: TF card slot- Tripod mount: 1/4 inch threaded hole- Video output: Standard HDMI- External RTK: DATA (4PIN)- External USB drive: USB-A10. Waterproof rating: IP53Package contents:- EyeLink-RC-S1 x 1- MK15 sky unit and omnidirectional antenna x 1- Range extender antenna x 1- USB upgrade data cable x 1- PWM and PIX flight controller data transmission cable x 1- R1M card recording HD camera x 1- PD Fast charging data cable with dual type-C ports x 1- Sky unit 8PIN connection cable x 1- 20W PD US standard fast charger x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.95kgs / 2.10lb One Package Size 22cm * 17cm * 10cm / 8.66inch * 6.69inch * 3.94inch Qty per Carton 12 Carton Weight 12.50kgs / 27.56lb Carton Size 46cm * 36cm * 32cm / 18.11inch * 14.17inch * 12.6inch Loading Container 20GP: 503 cartons * 12 pcs = 6036 pcs40HQ: 1168 cartons * 12 pcs = 14016 pcs
£563.99
-
Waveshare Waveshare Flexible RGB Full-color LED Matrix Panel, 2.5mm Pitch, 96x48 Pixels, Adjustable Brightness Bendable PCB, 23709
1. Pixel: 96 x 48=4608 dots2. Pitch: 2.5mm3. Pixel format: 1R1G1B4. Viewing angle: greater than 140 degrees5. Control mode: synchronous6. Drive: 1/16 scan7. Connector: HUB758. Power supply: 5V / 2.5A (VH4 connector input)9. Power: within 20W10. Size: 24 x 12cmFeatures:1. 4608 independent RGB led, full color display, brightness adjustable2. 96x48 pixels, 2.5mm pitch, allows displaying text, color image or animation3. 240x120mm size, moderate size, suitable for DIY desktop display or wall mount display4. Two HUB75 headers on board, 1 for controller data input, 1 output, chain support5. Flexible PCB material, can be gently bent, suitable for some application scenarios such as cylinders, spheres and other curved surfaces6. Provide open source development resources (for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino, etc.)Specification: Package Weight One Package Weight 0.38kgs / 0.83lb One Package Size 26cm * 14cm * 2cm / 10.24inch * 5.51inch * 0.79inch Qty per Carton 66 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 66 pcs = 11682 pcs40HQ: 412 cartons * 66 pcs = 27192 pcs
£25.99
-
WAVESHARE WAVESHARE For Jetson Orin Nano / NX Aluminum Alloy Passive Cooling Case Onboard Power Button With Indicator, 34964
1. Designed for Jetson Orin Nano / NX developer kits, featuring precise cutouts and ample clearance for various interfaces.2. Combines an aluminum alloy finned enclosure with a copper heat pipe at the base to achieve silent, efficient, fanless heat dissipation.3. Features an onboard illuminated metal power switch, providing clear status indication and convenient power control.4. Includes mounting holes for standard industrial DIN rails, enabling installation in diverse deployment environments.5. Precision cutouts for the DC power input, DisplayPort, USB, Ethernet, Type-C, and dual SMA antenna ports balance interface protection with ease of access.6. Dimensions: Approx. 17.8 x 8.5 x 5.5 cm.Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 22cm * 18cm * 8cm / 8.66inch * 7.09inch * 3.15inch Qty per Carton 20 Carton Weight 11.00kgs / 24.25lb Carton Size 46cm * 42cm * 37cm / 18.11inch * 16.54inch * 14.57inch Loading Container 20GP: 373 cartons * 20 pcs = 7460 pcs40HQ: 865 cartons * 20 pcs = 17300 pcs
£48.99
Sie haben 144 von 265 Produkten gesehen