ENKAY
-
ENKAY 2 PCS ENKAY Hat-Prince für Garmin Forerunner 645 0,2 mm 9H Oberflächenhärte 2,15D Gebogene Kante Gehärtetes Glas Displayschutz
1. Die Premium-Hartglasfolie besteht aus speziell verarbeitetem Glas, um den Bildschirm des Geräts vor Stößen und Kratzern zu schützen. 2. Empfindliche Bedienung, zarte Berührung 3. Lichtdurchlässigkeit bis zu 99 %. 4. Die Oberflächenhärte kann den Bildschirm wirksam vor Kratzern und äußeren Stößen schützen. 5. Exquisite Verarbeitung, ultradünn. 6. Perfekte Haftung. Spezifikation: Allgemein Artikelgröße 3,5 x 3,5 x 0,02 cm Artikelgewicht 2 g Paket enthalten Packungsinhalt 2 x Reinigungstücher 2 x Staubabsorber 2 x Feuchttücher 2 x Displayschutzfolien Paketgewicht Gewicht eines Pakets 0,03 kg / 0,06 lb Einheitspackungsgröße 8,4 cm * 6,1 cm * 1,1 cm / 3,31 Zoll * 2,4 Zoll * 0,43 Zoll Menge pro Karton 300 Kartongewicht 3,00 kg / 6,61 lb Kartongröße 32 cm * 26 cm * 22 cm / 12,6 Zoll * 10,24 Zoll * 8,66 Zoll Container laden 20GP: 1456 Kartons * 300 Stück = 436800 Stück 40HQ: 3382 Kartons * 300 Stück = 1014600 Stück
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince für Garmin Fenix 5 Smart Watch 0,2 mm 9H Oberflächenhärte 2,15D explosionsgeschützte Displayschutzfolie aus gehärtetem Glas
Beschreibungen 1. Ultradünn und hervorragende Flexibilität. Sie müssen sich keine Sorgen machen, ob die Reflexe Ihrer Uhr nach dem Aufkleben der Folie nachlassen. 2. Hohe Härte. Diese Displayschutzfolie aus gehärtetem Glas besteht aus hochwertigem gehärtetem Glas und kann sich so effektiv und dauerhaft vor Kratzern oder Brüchen schützen. Bei einem Bruch zerbricht das gehärtete Glas in kleine, nicht scharfe Stücke, was es für Benutzer sicherer macht. 3. Hohe Auflösung. Dank hoher Lichtdurchlässigkeit und geringer Lichtreflexion bietet Ihnen die Folie einen hochauflösenden Bildschirm wie gewohnt. 4. Funktional. Der Displayschutz passt gut zu Ihrer Uhr und schützt Ihre Uhr wesentlich vor Kratzern, Fingerabdrücken, Wasser, Öl, Staub, Stößen, Rutschgefahr usw. Bei Flecken durch Wasser, Erde, Schlamm, Öl oder andere Verunreinigungen lässt er sich mühelos reinigen. 5. Sanfte Berührung. Der Film hat eine glatte Oberfläche. Sogar die Seiten des Bildschirmfilms fühlen sich dank des 2,15D-Bogenkantendesigns glatt an. 6. Bequem zu verwenden. Um die Folie anzubringen, müssen Sie lediglich den Bildschirm gründlich reinigen. 7. Langlebig. Dank guter Leistung und hoher Qualität kann es lange funktionieren. Installationsanleitung 1. Bitte reinigen Sie den LCD-Bildschirm vor der Installation mit dem Alkoholtupfer und dem Mikrofasertuch. 2. Schutzschicht von der Klebeseite abziehen. 3. Richten Sie das Glas sorgfältig auf dem Bildschirm aus. 4. Drücken Sie auf die Mitte des Glases, dann verteilt sich der Klebstoff gleichmäßig über alle Teile. Vorsichtsmaßnahmen 1. Da es sich um ein Glasprodukt handelt, beachten Sie bitte, dass die Kanten des Glases die empfindlichsten Bereiche sind. 2. Beim Entfernen zur Wiederverwendung können die Klebeeigenschaften so weit nachlassen, dass der Displayschutz nicht mehr am Gerät haftet. Es wird nicht empfohlen, den Glasschutz nach dem Anbringen wiederzuverwenden. 3. Durch übermäßige Kraftanwendung beim Anbringen oder Entfernen des Displayschutzes kann das Produkt beschädigt werden. Spezifikation: Allgemein Kompatibel mit Garmin: fenix 5 Artikelgröße 3,7 * 3,7 * 0,02 cm Artikelgewicht 2 g Wählen Form Runden Paketgewicht Gewicht eines Pakets 0,03 kg / 0,06 lb Einheitspackungsgröße 8,4 cm * 6,1 cm * 1,1 cm / 3,31 Zoll * 2,4 Zoll * 0,43 Zoll Menge pro Karton 400 Kartongewicht 2,40 kg / 5,29 lb Kartongröße 45 cm * 35 cm * 20 cm / 17,72 Zoll * 13,78 Zoll * 7,87 Zoll Container laden 20GP: 846 Kartons * 400 Stück = 338400 Stück 40HQ: 1965 Kartons * 400 Stück = 786000 Stück
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince für Garmin Forerunner 235 Smart Watch 0,2 mm 9H Oberflächenhärte 2,15D explosionsgeschützte Displayschutzfolie aus gehärtetem Glas
Beschreibungen 1. Ultradünn und hervorragende Flexibilität. Sie müssen sich keine Sorgen machen, ob die Reflexe Ihrer Uhr nach dem Aufkleben der Folie nachlassen. 2. Hohe Härte. Diese Displayschutzfolie aus gehärtetem Glas besteht aus hochwertigem gehärtetem Glas und kann sich so effektiv und dauerhaft vor Kratzern oder Brüchen schützen. Bei einem Bruch zerbricht das gehärtete Glas in kleine, nicht scharfe Stücke, was es für Benutzer sicherer macht. 3. Hohe Auflösung. Dank hoher Lichtdurchlässigkeit und geringer Lichtreflexion bietet Ihnen die Folie einen hochauflösenden Bildschirm wie gewohnt. 4. Funktional. Der Displayschutz passt gut zu Ihrer Uhr und schützt Ihre Uhr wesentlich vor Kratzern, Fingerabdrücken, Wasser, Öl, Staub, Stößen, Rutschgefahr usw. Bei Flecken durch Wasser, Erde, Schlamm, Öl oder andere Verunreinigungen lässt er sich mühelos reinigen. 5. Sanfte Berührung. Der Film hat eine glatte Oberfläche. Sogar die Seiten des Bildschirmfilms fühlen sich dank des 2,15D-Bogenkantendesigns glatt an. 6. Bequem zu verwenden. Um die Folie anzubringen, müssen Sie lediglich den Bildschirm gründlich reinigen. 7. Langlebig. Dank guter Leistung und hoher Qualität kann es lange funktionieren. Installationsanleitung 1. Bitte reinigen Sie den LCD-Bildschirm vor der Installation mit dem Alkoholtupfer und dem Mikrofasertuch. 2. Schutzschicht von der Klebeseite abziehen. 3. Richten Sie das Glas sorgfältig auf dem Bildschirm aus. 4. Drücken Sie auf die Mitte des Glases, dann verteilt sich der Klebstoff gleichmäßig über alle Teile. Vorsichtsmaßnahmen 1. Da es sich um ein Glasprodukt handelt, beachten Sie bitte, dass die Kanten des Glases die empfindlichsten Bereiche sind. 2. Beim Entfernen zur Wiederverwendung können die Klebeeigenschaften so weit nachlassen, dass der Displayschutz nicht mehr am Gerät haftet. Es wird nicht empfohlen, den Glasschutz nach dem Anbringen wiederzuverwenden. 3. Durch übermäßige Kraftanwendung beim Anbringen oder Entfernen des Displayschutzes kann das Produkt beschädigt werden. Spezifikation: Allgemein Kompatibel mit Garmin: Vorläufer 235 Artikelgröße 4,1 * 4,1 * 0,02 cm Artikelgewicht 2 g Wählen Form Runden Paketgewicht Gewicht eines Pakets 0,03 kg / 0,06 lb Einheitspackungsgröße 8,4 cm * 6,1 cm * 1,1 cm / 3,31 Zoll * 2,4 Zoll * 0,43 Zoll Menge pro Karton 400 Kartongewicht 3,20 kg / 7,05 lb Kartongröße 45 cm * 35 cm * 20 cm / 17,72 Zoll * 13,78 Zoll * 7,87 Zoll Container laden 20GP: 846 Kartons * 400 Stück = 338400 Stück 40HQ: 1965 Kartons * 400 Stück = 786000 Stück
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince für Garmin Forerunner 935 Smart Watch 0,2 mm 9H Oberflächenhärte 2,15D explosionsgeschützte Displayschutzfolie aus gehärtetem Glas
Beschreibungen 1. Ultradünn und hervorragende Flexibilität. Sie müssen sich keine Sorgen machen, ob die Reflexe Ihrer Uhr nach dem Aufkleben der Folie nachlassen. 2. Hohe Härte. Diese Displayschutzfolie aus gehärtetem Glas besteht aus hochwertigem gehärtetem Glas und kann sich so effektiv und dauerhaft vor Kratzern oder Brüchen schützen. Bei einem Bruch zerbricht das gehärtete Glas in kleine, nicht scharfe Stücke, was es für Benutzer sicherer macht. 3. Hohe Auflösung. Dank hoher Lichtdurchlässigkeit und geringer Lichtreflexion bietet Ihnen die Folie einen hochauflösenden Bildschirm wie gewohnt. 4. Funktional. Der Displayschutz passt gut zu Ihrer Uhr und schützt Ihre Uhr wesentlich vor Kratzern, Fingerabdrücken, Wasser, Öl, Staub, Stößen, Rutschgefahr usw. Bei Flecken durch Wasser, Erde, Schlamm, Öl oder andere Verunreinigungen lässt er sich mühelos reinigen. 5. Sanfte Berührung. Der Film hat eine glatte Oberfläche. Sogar die Seiten des Bildschirmfilms fühlen sich dank des 2,15D-Bogenkantendesigns glatt an. 6. Bequem zu verwenden. Um die Folie anzubringen, müssen Sie lediglich den Bildschirm gründlich reinigen. 7. Langlebig. Dank guter Leistung und hoher Qualität kann es lange funktionieren. Installationsanleitung 1. Bitte reinigen Sie den LCD-Bildschirm vor der Installation mit dem Alkoholtupfer und dem Mikrofasertuch. 2. Schutzschicht von der Klebeseite abziehen. 3. Richten Sie das Glas sorgfältig auf dem Bildschirm aus. 4. Drücken Sie auf die Mitte des Glases, dann verteilt sich der Klebstoff gleichmäßig über alle Teile. Vorsichtsmaßnahmen 1. Da es sich um ein Glasprodukt handelt, beachten Sie bitte, dass die Kanten des Glases die empfindlichsten Bereiche sind. 2. Beim Entfernen zur Wiederverwendung können die Klebeeigenschaften so weit nachlassen, dass der Displayschutz nicht mehr am Gerät haftet. Es wird nicht empfohlen, den Glasschutz nach dem Anbringen wiederzuverwenden. 3. Durch übermäßige Kraftanwendung beim Anbringen oder Entfernen des Displayschutzes kann das Produkt beschädigt werden. Spezifikation: Allgemein Kompatibel mit Garmin: Forerunner 935 Artikelgröße 4,0 * 4,0 * 0,02 cm Artikelgewicht 2 g Wählen Form Runden Paketgewicht Gewicht eines Pakets 0,04 kg / 0,08 lb Einheitspackungsgröße 8,4 cm * 6,1 cm * 1,1 cm / 3,31 Zoll * 2,4 Zoll * 0,43 Zoll Menge pro Karton 400 Kartongewicht 9,50 kg / 20,94 lb Kartongröße 45 cm * 35 cm * 20 cm / 17,72 Zoll * 13,78 Zoll * 7,87 Zoll Container laden 20GP: 846 Kartons * 400 Stück = 338400 Stück 40HQ: 1965 Kartons * 400 Stück = 786000 Stück
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince for Garmin vivoactive 3 Smart Watch 0.2mm 9H Surface Hardness 2.15D Explosion-proof Tempered Glass Screen Film
Descriptions 1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your watch would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film is made of premium tempered glass , so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it more safer for users. 3. High definition. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your watch well and make a big difference on protecting your watch from scratch,fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5.Delicate touch. The film has smooth surface. Even the sides of screen film feels smoothly due to 2.15D arc edge design. 6. Convenient for use. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it may work for a long time. Installation Instructions 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to reuse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product. Specification: General Compatible with Garmin: vívoactive 3 Item Size 3.6*3.6*0.02cm Item Weight 2g Dial Shape Round Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8.4cm * 6.1cm * 1.1cm / 3.31inch * 2.4inch * 0.43inch Qty per Carton 400 Carton Weight 9.00kgs / 19.84lb Carton Size 36cm * 33cm * 24cm / 14.17inch * 12.99inch * 9.45inch Loading Container 20GP: 935 cartons * 400 pcs = 374000 pcs40HQ: 2171 cartons * 400 pcs = 868400 pcs
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince für Garmin Vivomove HR Smart Watch 0,2 mm 9H Oberflächenhärte 2,15D explosionsgeschützte Displayschutzfolie aus gehärtetem Glas, für Garmin Vivomove HR
Beschreibungen 1. Ultradünn und hervorragende Flexibilität. Sie müssen sich keine Sorgen machen, ob die Reflexe Ihrer Uhr nach dem Aufkleben der Folie nachlassen. 2. Hohe Härte. Diese Displayschutzfolie aus gehärtetem Glas besteht aus hochwertigem gehärtetem Glas und kann sich so effektiv und dauerhaft vor Kratzern oder Brüchen schützen. Bei einem Bruch zerbricht das gehärtete Glas in kleine, nicht scharfe Stücke, was es für Benutzer sicherer macht. 3. Hohe Auflösung. Dank hoher Lichtdurchlässigkeit und geringer Lichtreflexion bietet Ihnen die Folie einen hochauflösenden Bildschirm wie gewohnt. 4. Funktional. Der Displayschutz passt gut zu Ihrer Uhr und schützt Ihre Uhr erheblich vor Kratzern, Fingerabdrücken, Wasser, Öl, Staub, Stößen, Rutschgefahr usw. Bei Flecken durch Wasser, Erde, Schlamm, Öl oder andere Verunreinigungen lässt er sich mühelos reinigen. 5. Sanfte Berührung. Der Film hat eine glatte Oberfläche. Sogar die Seiten des Bildschirmfilms fühlen sich dank des 2,15D-Bogenkantendesigns glatt an. 6. Bequem zu verwenden. Um die Folie anzubringen, müssen Sie lediglich den Bildschirm gründlich reinigen. 7. Langlebig. Dank guter Leistung und hoher Qualität kann es lange funktionieren. Installationsanleitung 1. Bitte reinigen Sie den LCD-Bildschirm vor der Installation mit dem Alkoholtupfer und dem Mikrofasertuch. 2. Schutzschicht von der Klebeseite abziehen. 3. Richten Sie das Glas sorgfältig auf dem Bildschirm aus. 4. Drücken Sie auf die Mitte des Glases, dann verteilt sich der Klebstoff gleichmäßig über alle Teile. Vorsichtsmaßnahmen 1. Da es sich um ein Glasprodukt handelt, beachten Sie bitte, dass die Kanten des Glases die empfindlichsten Bereiche sind. 2. Beim Entfernen zur Wiederverwendung können die Klebeeigenschaften so weit nachlassen, dass der Displayschutz nicht mehr am Gerät haftet. Es wird nicht empfohlen, den Glasschutz nach dem Anbringen wiederzuverwenden. 3. Durch übermäßige Kraftanwendung beim Anbringen oder Entfernen des Displayschutzes kann das Produkt beschädigt werden. Spezifikation: Allgemein Artikelgröße 3,6 * 3,6 * 0,02 cm Artikelgewicht 2 g Wählen Form Runden Paketgewicht Gewicht eines Pakets 0,03 kg / 0,07 lb Einheitspackungsgröße 8,4 cm * 6,1 cm * 1,1 cm / 3,31 Zoll * 2,4 Zoll * 0,43 Zoll Menge pro Karton 400 Kartongewicht 9,20 kg / 20,28 lb Kartongröße 45 cm * 35 cm * 20 cm / 17,72 Zoll * 13,78 Zoll * 7,87 Zoll Container laden 20GP: 846 Kartons * 400 Stück = 338400 Stück 40HQ: 1965 Kartons * 400 Stück = 786000 Stück
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince für Samsung Gear S3 Smart Watch 0,2 mm 9H Oberflächenhärte 2,15D explosionsgeschützte Displayfolie aus gehärtetem Glas
Beschreibungen 1. Ultradünn und hervorragende Flexibilität. Sie müssen sich keine Sorgen machen, ob die Reflexe Ihrer Uhr nach dem Aufkleben der Folie nachlassen. 2. Hohe Härte. Diese Displayschutzfolie aus gehärtetem Glas besteht aus hochwertigem gehärtetem Glas und kann sich so effektiv und dauerhaft vor Kratzern oder Brüchen schützen. Bei einem Bruch zerbricht das gehärtete Glas in kleine, nicht scharfe Stücke, was es für Benutzer sicherer macht. 3. Hohe Auflösung. Dank hoher Lichtdurchlässigkeit und geringer Lichtreflexion bietet Ihnen die Folie einen hochauflösenden Bildschirm wie gewohnt. 4. Funktional. Der Displayschutz passt gut zu Ihrer Uhr und schützt Ihre Uhr erheblich vor Kratzern, Fingerabdrücken, Wasser, Öl, Staub, Stößen, Rutschgefahr usw. Bei Flecken durch Wasser, Erde, Schlamm, Öl oder andere Verunreinigungen lässt er sich mühelos reinigen. 5. Sanfte Berührung. Der Film hat eine glatte Oberfläche. Sogar die Seiten des Bildschirmfilms fühlen sich dank des 2,15D-Bogenkantendesigns glatt an. 6. Bequem zu verwenden. Um die Folie anzubringen, müssen Sie lediglich den Bildschirm gründlich reinigen. 7. Langlebig. Dank guter Leistung und hoher Qualität kann es lange funktionieren. Installationsanleitung 1. Bitte reinigen Sie den LCD-Bildschirm vor der Installation mit dem Alkoholtupfer und dem Mikrofasertuch. 2. Schutzschicht von der Klebeseite abziehen. 3. Richten Sie das Glas sorgfältig auf dem Bildschirm aus. 4. Drücken Sie auf die Mitte des Glases, dann verteilt sich der Klebstoff gleichmäßig über alle Teile. Vorsichtsmaßnahmen 1. Da es sich um ein Glasprodukt handelt, beachten Sie bitte, dass die Kanten des Glases die empfindlichsten Bereiche sind. 2. Beim Entfernen zur Wiederverwendung können die Klebeeigenschaften so weit nachlassen, dass der Displayschutz nicht mehr am Gerät haftet. Es wird nicht empfohlen, den Glasschutz nach dem Anbringen wiederzuverwenden. 3. Durch übermäßige Kraftanwendung beim Anbringen oder Entfernen des Displayschutzes kann das Produkt beschädigt werden. Spezifikation: Allgemein Kompatibel mit Samsung: Getriebe S3 Artikelgröße 3,3 * 3,3 * 0,02 cm Artikelgewicht 2 g Wählen Form Runden Paketgewicht Gewicht eines Pakets 0,03 kg / 0,06 lb Einheitspackungsgröße 8,4 cm * 6,1 cm * 1,1 cm / 3,31 Zoll * 2,4 Zoll * 0,43 Zoll Menge pro Karton 400 Kartongewicht 2,40 kg / 5,29 lb Kartongröße 45 cm * 35 cm * 20 cm / 17,72 Zoll * 13,78 Zoll * 7,87 Zoll Container laden 20GP: 846 Kartons * 400 Stück = 338400 Stück 40HQ: 1965 Kartons * 400 Stück = 786000 Stück
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince Full Coverage 28 Degree Privacy Screen Protector Anti-spy Tempered Glass Film, For iPhone 12 / 12 Pro, For iPhone 12 mini, For iPhone 12 Pro Max, For iPhone 11 Pro / XS / X, For iPhone 11 / XR, For iPhone 11 Pro Max
1. Screen is only visible to persons directly in front of screen; Protects your personal privacy effectively2. 9H hardness, scratch resistant, and maintains the original touch experience3. 2.5D rounded edge glass for comfort on the fingers and hand4. Hydrophobic and oleo-phobic coating to reduce sweat and reduce fingerprints5. Please Note:Due to anti-spy function, it will be a little dark which will consume more power while you increase the lightness of the screenSpecification: General Compatible with Apple: iPhone 12, iPhone 12 Pro Package Weight One Package Weight 0.14kgs / 0.31lb One Package Size 20cm * 12cm * 3cm / 7.87inch * 4.72inch * 1.18inch Qty per Carton 80 Carton Weight 12.30kgs / 27.12lb Carton Size 40cm * 48cm * 30cm / 15.75inch * 18.9inch * 11.81inch Loading Container 20GP: 462 cartons * 80 pcs = 36960 pcs40HQ: 1074 cartons * 80 pcs = 85920 pcs
£3.99
-
ENKAY 2 PCS ENKAY Hat-Prince Full Glue 0.26mm 9H 2.5D Tempered Glass Full Coverage Film
Description1. Ultra-thin and flexibility. The screen is thick. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.5. Smooth surface. Even the sides of screen film feels smoothly.6. Convenient for use. It has excellent adhesion. To paste the film, you need to do is clean up the screen thoroughly.7. Durable. With good performance and high quality, it can work for a long time.Installation Instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.2. Peel the protective layer off the adhesive side.3. Carefully align the glass to the screen.4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas.2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied.3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Xiaomi: Redmi 9T Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 20cm * 11cm * 2cm / 7.87inch * 4.33inch * 0.79inch Qty per Carton 200 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 41cm * 41cm / 22.05inch * 16.14inch * 16.14inch Loading Container 20GP: 283 cartons * 200 pcs = 56600 pcs40HQ: 657 cartons * 200 pcs = 131400 pcs
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince Full Glue 0.26mm 9H 2.5D Tempered Glass Full Coverage Film
Description1. Ultra-thin and excellent flexibility. The screen is thick. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.5. Smooth surface. Even the sides of screen film feels smoothly.6. Convenient for use. It has excellent adhesion. To paste the film, you need to do is clean up the screen thoroughly.Installation Instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.2. Peel the protective layer off the adhesive side.3. Carefully align the glass to the screen.4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas.2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied.3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Xiaomi: Poco F3 Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 19.3cm * 10.4cm * 1.8cm / 7.6inch * 4.09inch * 0.71inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 76cm * 21cm / 35.43inch * 29.92inch * 8.27inch Loading Container 20GP: 185 cartons * 404 pcs = 74740 pcs40HQ: 430 cartons * 404 pcs = 173720 pcs
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince Full Glue 0.26mm 9H 2.5D Tempered Glass Full Coverage Film
Description1. Ultra-thin and good flexibility. The screen is thick. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.5. Smooth surface. Even the sides of screen film feels smoothly.6. Convenient for use. It has excellent adhesion. To paste the film, you only need to do is clean up the screen thoroughly.7. Durable. With good performance and high quality, it can work for a long time.Installation Instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.2. Peel the protective layer off the adhesive side.3. Carefully align the glass to the screen.4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas.2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied.3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Huawei: P40 Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 20cm * 16cm * 1cm / 7.87inch * 6.3inch * 0.39inch Qty per Carton 200 Carton Weight 15.50kgs / 34.17lb Carton Size 45cm * 32cm * 32cm / 17.72inch * 12.6inch * 12.6inch Loading Container 20GP: 578 cartons * 200 pcs = 115600 pcs40HQ: 1343 cartons * 200 pcs = 268600 pcs
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-prince Full Glue 0.26mm 9H 2.5D Tempered Glass Full Coverage Film for
Description1. Ultra-thin and excellent flexibility. The screen is thick. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.5. Smooth surface. Even the sides of screen film feels smoothly.6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly.7. Durable. With good performance and high quality, it can work for a long time.Installation Instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.2. Peel the protective layer off the adhesive side.3. Carefully align the glass to the screen.4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied.3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Realme: X Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 19cm * 10cm * 1cm / 7.48inch * 3.94inch * 0.39inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 70cm * 10cm / 35.43inch * 27.56inch * 3.94inch Loading Container 20GP: 423 cartons * 356 pcs = 150588 pcs40HQ: 982 cartons * 356 pcs = 349592 pcs
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince Full Glue 0.26mm 9H 2.5D Tempered Glass Full Coverage Film, For Galaxy A01 2 PCS, For Galaxy A11 / M11 2 PCS, For Galaxy A21s 2pcs, For Galaxy A31 2 PCS
Description1. Ultra-thin and good flexibility. The screen is thick. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.5. Smooth surface. Even the sides of screen film feels smoothly.6. Convenient for use. It has excellent adhesion. To paste the film, you only need to do is clean up the screen thoroughly.7. Durable. With good performance and high quality, it can work for a long time.Installation Instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.2. Peel the protective layer off the adhesive side.3. Carefully align the glass to the screen.4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas.2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied.3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Samsung: Galaxy A31 Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 20cm * 16cm * 1.5cm / 7.87inch * 6.3inch * 0.59inch Qty per Carton 200 Carton Weight 15.00kgs / 33.07lb Carton Size 52cm * 36cm * 37cm / 20.47inch * 14.17inch * 14.57inch Loading Container 20GP: 385 cartons * 200 pcs = 77000 pcs40HQ: 893 cartons * 200 pcs = 178600 pcs
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince Full Glue 0.26mm 9H 2.5D Tempered Glass Full Coverage Film, For Samsung Galaxy M31s, For OnePlus Nord
Description1. Ultra-thin and fine flexibility. The screen is thick. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.5. Smooth surface. Even the sides of screen film feels smoothly.6. Convenient for use. It has excellent adhesion. To paste the film, you only need to do is clean up the screen thoroughly.7. Durable. With good performance and high quality, it can work for a long time.Installation Instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.2. Peel the protective layer off the adhesive side.3. Carefully align the glass to the screen.4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas.2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied.3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Samsung: Galaxy M31s Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 20cm * 16cm * 1.5cm / 7.87inch * 6.3inch * 0.59inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 52cm * 36cm * 37cm / 20.47inch * 14.17inch * 14.57inch Loading Container 20GP: 385 cartons * 200 pcs = 77000 pcs40HQ: 893 cartons * 200 pcs = 178600 pcs
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince Full Glue 0.26mm 9H 2.5D Tempered Glass Full Coverage Film, For Sony Xperia 10 III (2 PCS), For Sony Xperia 1 III (2 PCS), For Motorola Moto G10 / G20 / G30(2 PCS), For Motorola Moto G100 / G 5G Plus(2 PCS)
Description1. Ultra-thin and excellent flexibility. The screen is thick. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.5. Smooth surface. Even the sides of screen film feels smoothly.6. Convenient for use. It has excellent adhesion. To paste the film, you need to do is clean up the screen thoroughly.7. Durable. With good performance and high quality, it can work for a long time.Installation Instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.2. Peel the protective layer off the adhesive side.3. Carefully align the glass to the screen.4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas.2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied.3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Sony: Xperia 1 III Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 20cm * 16cm * 2cm / 7.87inch * 6.3inch * 0.79inch Qty per Carton 200 Carton Weight 15.00kgs / 33.07lb Carton Size 52cm * 42cm * 42cm / 20.47inch * 16.54inch * 16.54inch Loading Container 20GP: 290 cartons * 200 pcs = 58000 pcs40HQ: 674 cartons * 200 pcs = 134800 pcs
£4.99 £1.99
-
ENKAY 2 PCS ENKAY Hat-Prince Full Glue 0.26mm 9H 2.5D Tempered Glass Screen Protector Full Coverage Film, For iPhone 13 mini 2pcs, For iPhone 13 / 13 Pro 2pcs, For iPhone 13 Pro Max 2pcs
1. Ultra-thin and excellent flexibility. The screen is thick. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all.2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.5. Smooth surface. Even the sides of screen film feels smoothly.6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly.7. Durable. With good performance and high quality, it can work for a long time.Installation instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.2. Peel the protective layer off the adhesive side.3. Carefully align the glass to the screen.4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are very vulnerable areas.2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once its been applied.3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Apple: iPhone 13 Pro Max Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 19cm * 10.4cm * 1.8cm / 7.48inch * 4.09inch * 0.71inch Qty per Carton 160 Carton Weight 12.70kgs / 28.00lb Carton Size 38cm * 42cm * 36cm / 14.96inch * 16.54inch * 14.17inch Loading Container 20GP: 464 cartons * 160 pcs = 74240 pcs40HQ: 1077 cartons * 160 pcs = 172320 pcs
£4.99 £1.99
-