Resultados de la búsqueda de "coding toys"

1.Product Material: Synthetic Resin. 2.Product Size: 15*10*25cm. 3.Power Supply: 3x1.2V lithium batteries(included), USB charging. 4.Product Function: shining eyes, rolling money automatically, music broadcasting, revisability code, coin storage, sliding robot, desk lamp, mobilizable arm. 5.It is not only a piggy bank, but also a believable toy to benefit kids' mental abilities.Instructions1.Input the factory correct password "0000" , and the banknote door will be opened. But if you input the wrong password, the door will not alllow to be opened. 2.Money storage: put a banknote into the money gap, and the blue lighht flashes, at the same time robot will roll money into the box automatically, then plays the voice of saving money voice at the end. 3.At the state of opening door, it would alarm every 20s to remind you to close the door. 4.The usage of key "#" : -At the state of closing door, click "#" to transform into music mode, and click again transform into normal mode. -At the state of closing door, keep pressing the "#" to open or turn off the desk lamp. -At the state of opening door, click "#" to transform between Chinses language mode and English language mode. 5.The usage of key "*" : -At the state of opening door, keep pressing "*", and input four number password, then click "#", the factory password will be changed. 6.Lighht: -Robot's eyes would flash when rolling money, or at music mode. -Input correct password to withdraw money, it would broadcast voice when opening the door. 7.Ten songs can be chosen at music mode: -Body Song -My Bonnic -A Musician I Am -Baa Baa Black Sheep -Recoge Song, -I Went To School One Morning -Little Green Frong -Reach for the Sky -Row Row, Row Your Boat -The Itsy Bitsy SpiderSpecification: General Material Plastic Power Supply 3x1.2V lithhium batteries Charge Time 150min Product Size 15*10*25cm Package Weight One Package Weight 0.93kgs / 2.05lb One Package Size 21.5cm * 12cm * 29cm / 8.46inch * 4.72inch * 11.42inch Qty per Carton 24 Carton Weight 23.00kgs / 50.71lb Carton Size 78cm * 45cm * 64cm / 30.71inch * 17.72inch * 25.2inch Loading Container 20GP: 118 cartons * 24 pcs = 2832 pcs40HQ: 275 cartons * 24 pcs = 6600 pcs

Leer Más Menos

1. Supported movements: triangular gait, self-balancing2. Load capacity: 1kg3. Operating voltage: 12V4. No-load speed: 0.222sec / 60 degrees (45RPM)5. Stall torque: 30kg.cm6. Rated load: 10kg.cm7. Rated current: 900mA8. Control method: digital signal9. Control protocol type: half-duplex asynchronous serial communication10. Battery: 4000mAh (total capacity) 18650 lithium battery x 611. Charging method: DC 5.5x2.1 charging interface12. Battery life: 4.5h13. Charging time: 3h14. Onboard controller: ESP32-WROOM-3215. Onboard controller module features: Wi-Fi, BT, Dual Core, 240MHz16. Wireless control method: 2.4G Wi-Fi17. Wired control method: USB, UART18. Manual operation method: Web-based control interface19. Built-in high-precision 9-axis motion tracker ICM20948, capable of self-balancing20. No manual configuration of the compilation environment is required; a Wi-Fi hotspot is automatically established upon startup, allowing connection and login to the control page using a mobile phone or computer browser; no additional app download is required.21. Rich interfaces and peripherals: The device features a 0.91-inch OLED display, allowing for changes to the displayed content via a web application or host computer serial communication.22. Pre-drilled camera holes allow users to directly install cameras of the corresponding assembly size.23. Fully open source, supporting secondary development. HexArth series control code and communication interface documentation, based on our rich examples, allow for secondary development using various languages ??and devices.24. Can be installed as a Raspberry Pi 4B/Raspberry Pi 5 as a host computer for serial communication with the slave device; ESP32. As a lower-level machine, it can handle most of the computational power for inverse linkage solving and gait generation, leaving more resources for the Raspberry Pi to be used for high-level function development.25. Dimensions: 344.30 x 428.59 x 154.88 (mm)26. Weight: 2.1kg27. Servo dimensions: 45.20 x 24.70 x 37.30 (mm)28. Servo weight: 69gSpecification: Package Weight One Package Weight 2.20kgs / 4.86lb One Package Size 37cm * 45cm * 15cm / 14.57inch * 17.72inch * 5.91inch Qty per Carton 1 Carton Weight 3.30kgs / 7.28lb Carton Size 39cm * 47cm * 17cm / 15.35inch * 18.5inch * 6.69inch Loading Container 20GP: 855 cartons * 1 pcs = 855 pcs40HQ: 1986 cartons * 1 pcs = 1986 pcs

Leer Más Menos

Features1. Quality chassis with track: Adopting 37-520 full-metal DC geared motor, High torque, low noise 2. 180 degree wide angle rotation, flexible controlling robotic arm 3. Quality serial bus full-metal digital servo: High torque, high precision, preventing, it from being stuck and pamaged 4. Auto collision avoidance: Collecting data via camera by taking enough images of different conditions, using the data to train the neutral network, combined With AI algorithm, achieving auto collision avoidance on sorts of environments. 5. Motion detection: Capturing moving objects on the video by motion detection 6. Color recognition and tracking: Recognizing and locking specified color by camera, and then using pan & tilt to track the specified color automatically 7. 3D coordinate system controlled robotic arm, calculated via Inverse Kinematics algorithm: Input coordinate of the target, calculating the moving angles of the 4-DOF servos by inverse kinematics algorithm, and then controlling the servos via serial bus, moving the robotic arm to reach target position 8. JupyterLab programming: JupyterLab is a web-based interactive development environment, supports multi data formats including code, document, image/video, UI control interface, etc., provides rich visualized output, allows easily creating dashboard and UI, supports flexible configuration and arrangement for modular interface. 9. 8MP 160 degree FOV camera: IMX219 sensor, 3280 x2464 resolutionPackage List1. Aluminum alloy kit x1 2. JETANK expansion board x1 3. Wireless-AC8265 with antenna x1 4. IMX219-160 Camera x1 5. Acrylic camera spacer x1 6. Camera FFC x1 7. 0.91inch OLED x1 8. 12.6V 2A power supply + additional EU head x1 9. Robotic arm gripper x1 10. Thrust bearing x1 11. Flange bearing x2 12. Coupler x2 13. Gearmotor x2 14. 5264 servo wire x1 15. Track kit (including bolt, nut, and screwdriver) x2 16. 2 x 5 Pin wire x1 17. Spanner x1 18. L-form hex socket spanner 2PCS x1 19. SCS15-AP servo x4 20. Screwdriver 2PCS x1 21. SCS15-S servo x1 22. Card reader x1 23. Mini cross wrench sleeve x2 24. Cooling fan x1 25. PH2.0 4PIN dual connector cable x1 26. Screws pack x1Specification: Package Weight One Package Weight 2.00kgs / 4.42lb One Package Size 32cm * 22cm * 16cm / 12.6inch * 8.66inch * 6.3inch Qty per Carton 8 Carton Weight 17.00kgs / 37.48lb Carton Size 65cm * 45cm * 33cm / 25.59inch * 17.72inch * 12.99inch Loading Container 20GP: 276 cartons * 8 pcs = 2208 pcs40HQ: 641 cartons * 8 pcs = 5128 pcs

Leer Más Menos

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 4 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 4 pcs = 2088 pcs40HQ: 1213 cartons * 4 pcs = 4852 pcs

Leer Más Menos

1. It can slide forward/backward, walk forward/backward, turn left/right. 2. The robot can sing and dance to entertain you. 3. The robot can be programmed to carry out movements as you create. 4. Gesture control: using simple gestures, the robot can react to your gestures with basic movements, along with sound effects. 5. Patrol and obstacle avoidance: once detecting obstacle in the way, it will deliver message as reminders and then move backward and turn left or right on occasions to avoid obstacles. 6. The electronic toy has one key to perform automatically including walk, play music. 7. Best gift for your or friend''s kids. A good companion for them. 8. The R2 robot: Built-in 600mAh rechargeable battery. 9. Remote control power: 2 x AA batteries (not included).Specification: General Model R2 Battery Capacity 600mAh (Robot) Charging Time about 1 hour Play Time about 1.5 hours Size 16*8*26.5cm Weight 365g Package Include Package Contents 1 x Remote Control 1 x User Manual 1 x USB Charger Cable 1 x Robot Package Weight One Package Weight 0.76kgs / 1.68lb One Package Size 31cm * 18cm * 13cm / 12.2inch * 7.09inch * 5.12inch Qty per Carton 24 Carton Weight 19.00kgs / 41.89lb Carton Size 73cm * 40cm * 65cm / 28.74inch * 15.75inch * 25.59inch Loading Container 20GP: 140 cartons * 24 pcs = 3360 pcs40HQ: 326 cartons * 24 pcs = 7824 pcs

Leer Más Menos

OverviewThis AlphaBot2 robot kit is designed to use with an Arduino compatible controller (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, infrared remote control, Bluetooth communication, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, youre almost there, our open source demo codes is ready to help you get started fast.AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, its more efficient, more compact, and less heating4. N20 micro gear motor, with metal gears, low noise, high accuracy5. Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Ar, the upper adapter board for controller:1. Onboard Arduino interface, into which Arduino controller can be directly plugged2. 0.96inch 128x64 yellow/blue dual color OLED3. TLC1543 AD acquisition chip4. PC8574 I/O expander, avoid I/O shortage5. Xbee connector, for connecting dual-mode Bluetooth modulePackage Contents1. AlphaBot2-Ar (adapter board) x12. AlphaBot2-Base (base chassis) x13. Ultrasonic sensor x14. IR remote controller x15. FC-20P cable 8cm x16. USB type A plug to micro B plug cable x17. AlphaBot2-Ar screws x18. Screwdriver x1 (Extra Free)Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 15cm * 11cm * 9cm / 5.91inch * 4.33inch * 3.54inch Qty per Carton 48 Carton Weight 14.00kgs / 30.86lb Carton Size 60cm * 33cm * 36cm / 23.62inch * 12.99inch * 14.17inch Loading Container 20GP: 374 cartons * 48 pcs = 17952 pcs40HQ: 868 cartons * 48 pcs = 41664 pcs

Leer Más Menos

MIRA SALES · TOY KEYCHAIN Mini Palm Gaming Machine Keychain · Carrot Rabbit A compact cartoon-pattern palm gaming toy with electronic lights, multiple play levels and a portable keychain format. Product Preview · Auto Rotation 10 live images · changes every 2 seconds. 📦 Package 1 × mini palm gaming machine keychain Pattern: Carrot Rabbit Package weight: 0.04 kg Package size: 10 × 12 × 3 cm 🔑 Key Specifications Material: plastic Electronic lighting design Multiple play levels Approx. product weight: 29 g Button battery included Portable keychain/decorative pendant format Mira Sales TipA fun portable mini toy for on-the-go play. Use it as a compact handheld toy or hang it from a bag or keychain for easy carrying. ✅ Key Benefits ✔ Compact and lightweight ✔ Multiple play levels ✔ Electronic lighting ✔ Cute cartoon styling ✔ Portable keychain format 🖼️ More Product Photos Important Notes Button battery is included. Keep small toy components away from very young children.

Leer Más Menos

color: Multi-colour, material: MDF, size: 46cm * 46cm * 58.5cm1. Rocket space adventure: Blast off into imaginative play with this rocket-shaped activity cube! Little explorers can guide the rover along its built-in track, turn gears and discover colourful planets, astronauts and space-themed details, while encouraging early learning about space and planets2. 15 ways to explore: Flip, turn, match, stack and count with this wooden activity cube. Bead tracks, spinning gears, stacking blocks, a number dial, pattern matching and a clock give little hands different ways to play while practising fine motor control, hand-eye coordination and spatial thinking skills3. Made for little hands: Made from MDF, wood and beech accessories, this baby activity cube features smooth edges, rounded corners and a child-friendly painted surface for comfortable hands-on play. Its robust construction makes it easy for little hands to grasp, turn, move and explore each activity4. Montessori-inspired exploration: Following Montessori-inspired principles, this busy cube encourages children to learn through doing rather than simply watching. They can move the rover, turn gears, match patterns and explore numbers and time at their own pace, encouraging independent discovery and curiosity5. A gift for explorers: Looking for a gift that keeps little hands busy This toddler activity cube brings together a fun rocket shape and multiple hands-on activities for toddlers aged 24 months to 6 years. A playful choice for birthdays, Christmas, Childrens Day and other special momentsWhen screen-free play feels repetitive, explorers need more ways to stay curious. Reaching, turning and matching can feel frustrating when play offers too little variety. brings space-themed discovery into one Montessori Inspired cube, where a movable rover, gears, bead tracks and planets turn this activity cube into hands-on learning. Children can explore around the large activity cube at their own pace, practising coordination and spatial thinking while building curiosity about space.Specification: Package Weight One Package Size 46cm * 46cm * 58.5cm / 18.11inch * 18.11inch * 23.03inch Qty per Carton 1 Carton Weight 6.00kgs / 13.23lb Carton Size 54cm * 52cm * 18cm / 21.26inch * 20.47inch * 7.09inch Loading Container 20GP: 527 cartons * 1 pcs = 527 pcs40HQ: 1224 cartons * 1 pcs = 1224 pcs

Leer Más Menos

1. Metal structure, sturdy and durable, smooth parts do not hurt hands2. Can be used as home furnishings after assembly3. DIY assembly, stimulate logical thinking, improve children's hands and brain ability4. Parent-child interaction, exercise hands-on ability5. Made of environmentally friendly materials, safe, non-toxic and harmless6. Both sides of the door can be opened manually, the steering wheel rotation can control the front wheel left and right, so as to change the direction of the car head7. Material: metal, plastic8. Applicable age: 6 years old and above children9. Size: about 27.5 x 12 x 7.6cmSpecification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 36cm * 23cm * 4cm / 14.17inch * 9.06inch * 1.57inch Qty per Carton 24 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 24 pcs = 4248 pcs40HQ: 412 cartons * 24 pcs = 9888 pcs

Leer Más Menos

OverviewThis AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B (not included). It features rich common robot functions including line tracking, obstacle avoiding, Bluetooth/infrared/WiFi remote control, video monitoring, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, youre almost there, our open source demo codes is ready to help you get started fast.AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, its more efficient, more compact, and less heating4. 5Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Pi, the upper adapter board for controller:1. LM2596 voltage regulator, provides the Pi with stable 5V power2. TLC1543 AD acquisition chip, allows the Pi to use analog sensors3. PCA9685 servo controller, make it more smoothly to rotate the pan head4. CP2102 UART converter, easy for controlling the Pi via UARTSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 18cm * 6cm * 15cm / 7.09inch * 2.36inch * 5.91inch Qty per Carton 36 Carton Weight 1.80kgs / 3.97lb Carton Size 54cm * 36cm * 30cm / 21.26inch * 14.17inch * 11.81inch Loading Container 20GP: 457 cartons * 36 pcs = 16452 pcs40HQ: 1061 cartons * 36 pcs = 38196 pcs

Leer Más Menos