Comprobador de calidad del aire y del agua
-
Mira Sales JD-3002 Carbon Dioxide Comprehensive Air Quality Temperature Humidity Detector
Instrument instructions:1. After the test, the power of the equipment must be turned off to avoid accidents2. Prevent the instrument from violent vibration3. After placing the instrument for a long time, the odor gas will accumulate in the instrument, which will seriously affect the test results, in this case, the instrument must be placed in a cool and ventilated place, and then used for more than 1 hour (no operation is required during the ventilation process instrument)4. The expired and defective products should be repaired in time.5. Avoid shocking the sensor with gas higher than the measurement range, otherwise it may damage the sensor, and man-made damage is not covered by the warrantyInstrument introduction:1. Digital temperature and humidity sensor2. LCD display3. Mute button: Turn on or off the alarm sound. In the silent mode, the " " symbol is not displayed and there is no alarm sound. The default is to turn on the sound4. "+" button: When setting the alarm value, increase the value.5. Power button: long press for 2 seconds to turn on or off the power, when power on, the number field counts down from 1206. Temperature unit selection button: Celsius and Fahrenheit conversion7. "-" button: When setting the alarm value, decrease the value8. Setting button: Short press this button to set the alarm value of "CO2→TVOC→HCHO" in sequence, the original factory setting value will be displayed and flashing, and the parameter will be adjusted by the "+" button and "-" button, and the value will be displayed after 10 seconds. automatic storage9. Power supply: DC5V built-in 1800mAh lithium battery10. Dimensions: 195x95x35mm11. Carton packaging weight: 270 gramsDisplay content introduction:1. Alarm sound: press the "mute button" to operate2. CO2 measurement range: 350ppm~2000ppm3. TVOC measuring range: 0.000 mg/m3~2.000 mg/m34. HCHO measuring range: 0.000 mg/m3~1.000 mg/m35. Temperature display: press the "temperature unit selection button" to operate6. Measuring range: 0-90.0 degrees Celsius, 32-194 degrees Fahrenheit7. Environmental quality reminder: excellent, the detection value is lower than the set value; good, the CO2 detection value is 50ppm higher than the set value8. The TVOC detection value is 0.01 mg/m3 higher than the set value9. The detected value of HCHO is 0.03 mg/m3 higher than the set value10. Pollution: Buzzer fast sound alarm11. The detected value of CO2 is 100ppm higher than the set value12. The TVOC detection value is 0.02 mg/m3 higher than the set value13. The detected value of HCHO is 0.06 mg/m3 higher than the set value14. When the battery power is too low, the battery box will flash to remind the user to charge15. When charging, the characters in the battery frame will flash in sequence until the battery symbol is fully displayed when the battery is fully charged16. Humidity measurement range: 0~99.0RHimportant hint:1. Before use, please read the following detailed introduction carefully, and use the instrument correctly according to the manual2. Do not disassemble the instrument or throw it into fire3. Avoid operating the instrument in a strong wind environment4. Avoid shock and drop5. If it is not used for a long time, the warm-up time for the power-on will be longer6. Note: Do not let liquid flow into the instrumentSpecification: Package Weight One Package Weight 0.48kgs / 1.07lb One Package Size 27cm * 7cm * 22cm / 10.63inch * 2.76inch * 8.66inch Qty per Carton 108 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 108 pcs = 19116 pcs40HQ: 412 cartons * 108 pcs = 44496 pcs
£28.99
-
BENETECH BENETECH GM8803 Home Indoor Air Quality Detector Haze Smog Tester PM2.5 PM10 Gas Analyzers
Features1. Real-time dynamic measurement of PM2.5/PM10 concentration in air. 2. Ambient temperature and humidity measurement/temperature unit conversion. 3. It has three different display mode switching. 4. Many function, MAX/MIN display, data saving function, sound and light alarm settings and LCD backlight display.Specification1. Gas Tested: Particulate Concentration of PM2.5/PM10 in the air 2. Temperature Range: (0-5000)ug/m3; Measuring Range: 1ug/m3; 3. Resolution: 1ug/m 4. Resolution particle size: Greater than or equal 0.3um 5. Response Time: Less than or equal 10S 6. Measuring Principe: Laser diffusion Principle 7. Sensor Type: Universal digital particle concentration sensor 8. Operating Environment: 0-50 degree C, 32-122 degree F; 10-90%RH 9. Power: 3 x 1.2V Ni-MH AAA batteries(Built-in) / 5V / 1A power adapterSpecification: Package Weight One Package Weight 0.41kgs / 0.89lb One Package Size 20cm * 13cm * 8cm / 7.87inch * 5.12inch * 3.15inch Qty per Carton 20 Carton Weight 8.50kgs / 18.74lb Carton Size 42cm * 27cm * 42cm / 16.54inch * 10.63inch * 16.54inch Loading Container 20GP: 559 cartons * 20 pcs = 11180 pcs40HQ: 1299 cartons * 20 pcs = 25980 pcs
£40.99
-
Mira Sales Indoor Haze Dust Formaldehyde Air Quality Detector
1. Material: ABS2. Display mode: 2.8-inch LCD screen display, 320 x 240 pixels3. Atmospheric pressure: 86Kpa - 106Kpa4. Detection method of PM: laser scattering5. Sampling time: 1.5 seconds6. Detection temperature: -10 degrees celsius to 50 degrees celsius7. PM (PM2.5/1.0/10) concentration unit: ug/cubic meter8. Concentration unit of HCHO and TVOC: mg/m39. Power supply: 2000mAh lithium battery; 5V DC power charging via USB port10. Can detect formaldehyde (HCHO), total volatile organic compounds (TVOC), particles less than 2.5 microns in size (PM2.5/1.0/10), temperature and humidity, with clock and recording functions11. Onboard fan draws ambient air for more accurate real-time results12. The formaldehyde alarm threshold is 0.1 mg/m3, if the HCHO level exceeds this alarm threshold, the device will sound a short beep alarm13. Product weight: 183 grams14. Product size: 164 x 69 x 44 mmPacking list:- Air quality monitor x 1- Micro USB charging cable x 1- Product manual x 1Specification: Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 19.5cm * 10.5cm * 5.5cm / 7.68inch * 4.13inch * 2.17inch Qty per Carton 84 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 84 pcs = 14868 pcs40HQ: 412 cartons * 84 pcs = 34608 pcs
£35.99
-
SMART SENSOR SmartSensor AR8406 Portable Dissolved Oxygen Analyzer Dissolved
1. Ergonomic design, one-hand comfortable grip & anti-slip & anti-fatigue.2. More accurate measurement & more sensitive response & more comprehensive functions.3. Intuitive LCD display with backlight, easy to read values of dissolved oxygen and temperature even in dark or strong light environment.4. Automatic temperature compensation (ATC), fast response and automatic calibration.5. It supports recording 99 groups of data manually, convenient to record / compare / view data with one key.6. Widely applicable to aquaculture, biological reaction, environmental detection, wastewater treatment, laboratory field, medical field, etc.7. Power supply: 4 x AAA battery (Not included)Specification: Package Weight One Package Weight 1.11kgs / 2.45lb One Package Size 32cm * 22cm * 9cm / 12.6inch * 8.66inch * 3.54inch Qty per Carton 10 Carton Weight 12.00kgs / 26.46lb Carton Size 46cm * 47cm * 34cm / 18.11inch * 18.5inch * 13.39inch Loading Container 20GP: 362 cartons * 10 pcs = 3620 pcs40HQ: 842 cartons * 10 pcs = 8420 pcs
£133.99
-
SMART SENSOR SmartSensor AR8500 Handheld Ammonia Gas NH3 Detector Meter
1. Fast response speed, high precision, of its stability, good repeatability.2. The apparatus is widely used in metallurgy, power plant, farms, mines, chemical, scientific research, medical, pharmaceutical, environmental protection, and other fields.3. With a large LCD screen displaying the measured results, you can get ammonia gas concentration at a glance.4. The ammonia gas monitor has an audio and visual alarm, you can set an audio alarm decibel that can give you an obvious prompt.5. Portable and handheld, easy to operate and carry.6. Power supply: 3.7V li-battery.Specification: Package Weight One Package Weight 0.72kgs / 1.59lb One Package Size 18cm * 10cm * 5cm / 7.09inch * 3.94inch * 1.97inch Qty per Carton 30 Carton Weight 23.50kgs / 51.81lb Carton Size 38cm * 32cm * 27cm / 14.96inch * 12.6inch * 10.63inch Loading Container 20GP: 812 cartons * 30 pcs = 24360 pcs40HQ: 1885 cartons * 30 pcs = 56550 pcs
£136.99
-
SMART SENSOR SmartSensor PH818 PH Water Quality Tester Pen
1. Test the pH level and temperature of solution/water with data hold function.2. Pocket size, lightweight and portable with switchable backlight & large LCD display for clear reading.3. Replaceable pH sensor probe - The electrode probe can be replaced with insert type design for convenient and fast replacement.4. ATC function (automatic temperature compensation), automatic calibration and IP65 fully waterproof design.5. Apply in water sources, soil-free growing, aquariums, hydroponics, laboratory, spas, swimming pools and other water systems.6. Power: 2 x AAABattery (Not Included)Specification: Package Weight One Package Weight 0.25kgs / 0.54lb One Package Size 20cm * 6cm * 6cm / 7.87inch * 2.36inch * 2.36inch Qty per Carton 50 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 50 pcs = 31000 pcs40HQ: 1439 cartons * 50 pcs = 71950 pcs
£16.99
-
Mira Sales JPB-70A Portable Dissolved Oxygen Analyzer Water Quality Aquaculture Dissolved Oxygen Meter Detector
Technical features:1. Dot matrix backlit LCD display2. Automatic temperature compensation, fast response time3. Portable and easy to carry4. Equipped with our own dissolved oxygen electrode (polarographic type coated type)Main Specifications:1. Measuring range: Dissolved oxygen: (0.0~20.0) mg/L, temperature: (0-40) degrees Celsius2. Basic error: Dissolved oxygen: ±0.01mg/L, temperature: ±1°C3. Residual current: not more than 0.15mg/L4. Response time: no more than 30s (90% response at 20 degrees Celsius)5. Range of automatic temperature compensation: (0-40) degrees Celsius6. Adopt 1.5V LR44 button battery x 4 (not included in delivery)7. Dimensions: 4×18.5 cm8. Weight: 88 gramsPacking list:1. Host x12. One meter wire dissolved oxygen electrode x13. Electrode membrane cover x34. A reagent x1 (set)5. Empty bottle spare x16. Certificate of conformity x17. Warranty card x18. Manual x1Specification: Package Weight One Package Weight 0.69kgs / 1.52lb One Package Size 33cm * 25cm * 7cm / 12.99inch * 9.84inch * 2.76inch Qty per Carton 10 Carton Weight 8.50kgs / 18.74lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 10 pcs = 4480 pcs40HQ: 1040 cartons * 10 pcs = 10400 pcs
£69.99
-
Mira Sales WP6932 Professional Home Formaldehyde Detector New House Measuring Formaldehyde Instrument MP2.5 Air Detector
1. Display form: LCD2. Formaldehyde detection range: 0-1.999 mg/m33. TVOC detection range: 0-9.999 mg/m34. TVOC effectors: Benzene, alkanes, alkenes, ketones, etc.5. Temperature detection range: 0-50 degrees Celsius6. Moderate detection range: 20-90%RH7. Built-in battery: 1200mAh lithium battery8. Charging time: About 4 hours9. Battery life: About 2 hours10. USB interface: Type-C interface11. Input: 5V/1A12. Specifications: English version13. Dimensions: 15.1x6.9x4.5 cmSpecification: Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 20cm * 12cm * 7cm / 7.87inch * 4.72inch * 2.76inch Qty per Carton 40 Carton Weight 14.20kgs / 31.31lb Carton Size 42cm * 50cm * 35cm / 16.54inch * 19.69inch * 13.78inch Loading Container 20GP: 362 cartons * 40 pcs = 14480 pcs40HQ: 842 cartons * 40 pcs = 33680 pcs
£31.99
-
Mira Sales AK3 Portable CO2 Air Quality Formaldehyde Carbon Dioxide Detector, AK3 Semiconductor 5 in 1
1. Display mode: smart color screen2. Working voltage: DC 5V3. Working temperature: 10-50 degrees Celsius4. Battery capacity: 1200mA5. Alarm method: color and sound dual reminder6. Standby time: 10 hours7. Security range:-CO2: 350-2000ppm-TVOC: 0.000-2.000 mg/m3-HCHO: 0.000-1.000 mm/m3-Temperature: 0-90 degrees Celsius-Humidity: 0-99%RHSpecification: Package Weight One Package Weight 0.19kgs / 0.43lb One Package Size 15cm * 12cm * 8cm / 5.91inch * 4.72inch * 3.15inch Qty per Carton 154 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 154 pcs = 27258 pcs40HQ: 412 cartons * 154 pcs = 63448 pcs
£26.99
-
Mira Sales US Electric Conductivity Meter / Water Quality Treatment Tester Pen
About the product1. EC conductivity meter for test the quality of water. 2. The measuring water probe of conductivity test pen is made of titanium alloy materials. 3. Appearance dexterous, beautiful, small size, measuring high precision. 4. Large-screen digital display. 5. Easy to clean, and easy to carry. 6. Quick measurement, 5-30 seconds can finish one measurement. 7. With Automatic Temperature Compensation 8. EC conductivity meter has a wide range of applications including aquarium, hydroponics, water systems, aquaculture, pools and spas, labs & scientific testing, boilers & cooling towers, home, office, physical & chemical teaching, cosmetics and so on.The Test Pen Using1. Remove the protective cover. 2. Press the ON / OFF switch, connect power supply. 3. Put the US conductivity insert test pen into the test liquid until the liquid immerses slightly below the position of the immersion line. 4. Gently shaking, eliminate the bubbles of electrode. 5. Read the data after the indication stable (about 10 seconds). Press the HOLD key, the number locked. You can take the US conductivity test pen out the surface of liquid to read. Press again the HOLD key, then it can be unlocked. 6. After using, turn off the power, clean the electrode with water, then put on protective sleeve.Specification: General Resolution 1 us/cm Auto shut-off 10 minutes Measure Range 0 ~ 1999 us/cm Operating Temperature 0 ~ 60 Degree Celsius Accuracy +/-2% F.S Power Supply 2 x AG13 button cell batteries Battery Life about 1000 hours Package Include Package Contents 1 x Electric Conductivity Meter Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 14.5cm * 3.5cm * 3.4cm / 5.71inch * 1.38inch * 1.34inch Qty per Carton 240 Carton Weight 14.40kgs / 31.75lb Carton Size 53cm * 31cm * 30cm / 20.87inch * 12.2inch * 11.81inch Loading Container 20GP: 541 cartons * 240 pcs = 129840 pcs40HQ: 1255 cartons * 240 pcs = 301200 pcs
£6.99
-
Mira Sales 5-in-1 Indoor Home Portable Air Monitor TVOC Formaldehyde Detector, 5-in-1(White), 5-in-1(Light Gray)
1. Measuring range: 400-50002. Measurement accuracy: 5PPM3. Measurement objects:W17 (carbon monoxide + carbon dioxide + formaldehyde + air quality + chemical pollutants)W17A (carbon monoxide + carbon dioxide + formaldehyde + temperature + humidity)4. Applicable scenes: indoors, in cars, public places, stations, gardens, schools5. Power: 5W6. Application technology: natural air flow detection technology7. Display mode: LED8. Error fluctuation: 0-30%9. Power on warm-up: 120 seconds10. Working voltage: 5V11. Battery capacity: 850mAh12. Charging time: about 3 hours13. Working time: about 180-240 minutes14. Product dimensions: 6.3 x 2.6 x 12 cm15. Product weight: about 235 gramsSpecification: Package Weight One Package Weight 0.23kgs / 0.50lb One Package Size 18cm * 9cm * 4cm / 7.09inch * 3.54inch * 1.57inch Qty per Carton 50 Carton Weight 12.30kgs / 27.12lb Carton Size 46cm * 38cm * 22cm / 18.11inch * 14.96inch * 8.66inch Loading Container 20GP: 693 cartons * 50 pcs = 34650 pcs40HQ: 1609 cartons * 50 pcs = 80450 pcs
£12.99
-
Mira Sales 50pcs PH075 6 In 1 Residual Chlorine PH Water Quality Detector PH Test Paper, Package Random Delivery
1. Scope:- Total chlorine: 0-10- Free chlorine, acid-base value (pH): 0-10- PH: 6.8-8.4- Total alkalinity: 0-240- Total hardness: 0-1000- Cyanuric acid, melamine: 0-2402. Fast detection, simple operation3. Easy to use, suitable for the detection of drinking water, swimming pool water quality4. Easy to understand the main six indicators of water quality5. Lightweight plastic bottle outer packaging, tinfoil inner bag, waterproof and moisture-proof, easy to store and carry, to ensure long-term use6. Quantity: 50pcs/bottle7. Size: about 9.6 x 3.6cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 6cm * 4cm / 5.91inch * 2.36inch * 1.57inch Qty per Carton 468 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 468 pcs = 82836 pcs40HQ: 412 cartons * 468 pcs = 192816 pcs
£2.99 £0.99
-
Mira Sales Digital Multi-function LCD Monitor TDS & EC Meter Water Measurement Test Tool, Digital
1.This is a digital TDS meter tester to test the filter water quality purity, to check the performance of your water filter, to check for hardness to make sure you always drink pure water.Saves measurements for convenient reading and recording New Arrival 2.Auto-off function: turns off meter after 5 minutes of non-use to conserve batteries 3.Automatic temperature compensation 4.Shift between TDS and conductivity 5.Can be used in : Water purifiers and filters, food(vegetable, fruit)& drink quality monitoring, pools and spas, aquarium, hydroponicsSpecification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 12cm * 6cm * 4cm / 4.72inch * 2.36inch * 1.57inch Qty per Carton 100 Carton Weight 11.60kgs / 25.57lb Carton Size 40cm * 30cm * 26cm / 15.75inch * 11.81inch * 10.24inch Loading Container 20GP: 854 cartons * 100 pcs = 85400 pcs40HQ: 1984 cartons * 100 pcs = 198400 pcs
£2.99
-
BENETECH BENETECH GM760 Digital PH Meter Tester
1. Measuring PH value of the solution2. Measuring the temperature of the solution3. LCD backlight hold4. Data hold 5. Temperature unit switch6. Power off memory 7. Solution temperature compensation8. Low battery indicationSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 20cm * 5cm * 5cm / 7.87inch * 1.97inch * 1.97inch Qty per Carton 120 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 120 pcs = 45720 pcs40HQ: 885 cartons * 120 pcs = 106200 pcs
£10.99
-
Mira Sales Formaldehyde TVOC Detector PM2.5 Dust Tester, DM502
1. Material: ABS2. Display mode: 2.8-inch LCD screen display, 320x240 pixels3. Atmospheric pressure: 86Kpa - 106Kpa4. Detection method of PM: laser scattering5. Sampling time: 1.5 seconds6. Detection temperature: -10 to 50 degrees celsius7. Relative humidity: 20 percent to 85 percent8. Storage temperature: -10 degrees celsius to 60 degrees celsius9. Concentration unit of HCHO and TVOC: mg/m310. Power supply: 1500mAh lithium battery11. Power supply: 5V DC power charging via USB port12. User adjustable formaldehyde (HCHO) alarm threshold to alert user to elevated13. Onboard fan draws ambient air for more accurate real-time results14. With low battery warning15. Combined with multiple air sensors and a built-in fan, it can monitor real-time detectable formaldehyde (HCHO), total volatile organic compounds (TVOC), particulate matter < 2.5 microns in size (PM2.5/1.0/10), temperature and humidity, with clock and recording function16. Dimensions: 155x87x35mm17. Weight: about 280 gramsPacking list:- Detector x 1- USB cable x 1- Manual x 1Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 19.5cm * 12.5cm * 4cm / 7.68inch * 4.92inch * 1.57inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs40HQ: 412 cartons * 98 pcs = 40376 pcs
£49.99
-
Mira Sales DM103B Temperature Humidity Dust PM2.5 Air Quality Detector
1. Material: ABS2. Display mode: digital tube display3. Atmospheric pressure: 86Kpa - 106Kpa4. Detection method of PM: laser scattering5. Sampling time: 1.5 seconds6. Detection of PM2.5: 0-999 ug/cubic meter7. Detection temperature: -10 to 50 degrees celsius8. Relative humidity: 20 percent to 85 percent9. Storage temperature: -10 degrees celsius to 60 degrees celsius10. Power supply: 1000mAh lithium battery11. Power supply: 5V DC power charging via USB port12. Combined with dust air sensor and built-in fan, it can monitor PM2.5, temperature and humidity in real time on digital LCD display13. Product weight: 168 grams14. Product size: 100x95x47mmSpecification: Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 11.7cm * 11.7cm * 7.8cm / 4.61inch * 4.61inch * 3.07inch Qty per Carton 84 Carton Weight 30.00kgs / 66.14lb Carton Size 51cm * 51cm * 34cm / 20.08inch * 20.08inch * 13.39inch Loading Container 20GP: 301 cartons * 84 pcs = 25284 pcs40HQ: 700 cartons * 84 pcs = 58800 pcs
£18.99
-
Mira Sales Indoor Temperature Humidity Air Quality Detector, 1308B
1. Material: ABS2. Accurate measurement3. Clear reading4. Applicable scene: Indoor5. Stable performance, strong anti-interference ability, low consumption6. Function: Measure CO2/HCHO/TVOC, temperature and humidity7. The ventilation holes accelerate the convection between the air and the machine, which enables effective detection, and also provides good heat dissipation8. Unit weight: 0.185kgSpecification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 80 Carton Weight 17.20kgs / 37.92lb Carton Size 52cm * 42cm * 30cm / 20.47inch * 16.54inch * 11.81inch Loading Container 20GP: 407 cartons * 80 pcs = 32560 pcs40HQ: 944 cartons * 80 pcs = 75520 pcs
£32.99
-
Mira Sales Detector de calidad del aire PM2.5/PM10, monitor de calidad del aire interior, detector de calidad del aire 6 en 1 blanco, detector de calidad del aire 6 en 1 negro
1. Material: ABS 2. Rango de detección de PM2.5: 0-999 ug/m3 3. Rango de detección de PM10: 0-999 ug/m3 4. Rango de detección de HCHO: 0-9,999 mg/m3 5. Rango de detección de TVOC: 0-9,999 mg/m3 6. Rango de detección de monóxido de carbono: 0-1000 ppm 7. Rango de detección de dióxido de carbono: 0-5000 ppm 8. Fuente de alimentación: 1 batería de litio de 1200 mAh (incluida) 9. Temperatura aplicable: -1 ~ +70 grados Celsius 10. Voltaje de funcionamiento: 5 V 11. Interfaz de carga: TIPO C 12. Con una pantalla grande, los datos de detección se pueden ver más claramente y los resultados se pueden obtener fácilmente. 13. El tamaño de la pantalla es pequeño, puedes usarla en el escritorio sin ocupar demasiado espacio, y también es portátil y se puede usar en la pared. 14. Adopte tecnología de detección infrarroja, tecnología de detección y tecnología de detección electroquímica para mostrar datos precisos. 15. Alarma de cuatro colores: verde significa buena calidad del aire, amarillo, naranja y rojo significa mala calidad del aire. 16. Pantalla LCD a todo color que muestra el valor de prueba en tiempo real, la carga de la batería y otros datos en una sola interfaz. 17. El sensor infrarrojo puede rastrear con precisión la calidad del aire, incluidos PM2.5, PM10, HCHO, TVOC, CO y CO2. 18. Adecuado para dormitorio, sala de estar, cocina, oficina, automóvil, escuela, hotel, campamento y otros entornos. 19. Detección integral de contaminantes y sustancias nocivas en el medio ambiente para proteger a su familia de daños. 20. Equipado con un sensor de temperatura y un sensor de humedad de alta calidad, la detección es rápida y precisa. 21. Fácil de operar, puede funcionar y detectar automáticamente sin calibración después de iniciarse. 22. Dimensiones: Aprox. 90x35x70mm 23. Peso neto: 140 gramos Especificación: Peso del paquete Peso de un paquete 0,20 kg/0,44 lb Un tamaño de paquete 12 cm x 12 cm x 5 cm (4,72 pulgadas x 4,72 pulgadas x 1,97 pulgadas) Cantidad por caja 146 Peso de la caja 30,00 kg/66,14 lb Tamaño de la caja 50 cm * 50 cm * 60 cm / 19,69 pulgadas * 19,69 pulgadas * 23,62 pulgadas Contenedor de carga 20GP: 177 cajas * 146 uds. = 25842 uds. 40HQ: 412 cajas * 146 piezas = 60152 piezas
£11.99
-
Mira Sales Medidor de calidad del agua con luz de fondo TDS y CE Medidor de conductividad, modelo con luz de fondo (blanco), modelo con luz de fondo (azul)
1. Pantalla LCD grande con luz de fondo, fácil de manejar en una variedad de entornos. 2. Cambio de unidades Celsius y Fahrenheit 3. Compensación automática de temperatura 4. Cambiar entre TDS y conductividad 5. Se puede utilizar: para la industria de tratamiento de agua, la industria del agua potable, la familia, viajes personales a domicilio, trabajo de campo, etc. como herramienta de inspección de la calidad del agua potable. Parámetros. 1. Rango de prueba de TDS: 0-9999 ppm 2. Rango de prueba de conductividad: 0-9990US/CM 3. Rango de temperatura: 0,1-80 grados Celsius 4. Precisión de la medición: +/-2% 5. Tipo de batería: pila de botón CR2032 6. Peso: 43 gramos 7. Tamaño: 153 x 30 x 14 mm Factores influyentes. -Temperatura del agua: el bolígrafo TDS no se puede utilizar para medir agua a alta temperatura (como agua hirviendo) - Caudal de agua: no se puede utilizar para medir el movimiento de una gran masa de agua. -Región: Cada región, ciudad debido a diferentes tuberías y fuentes de agua, el valor de TDS es diferente. Especificación: Peso del paquete Peso de un paquete 0,08 kg/0,19 lb Un tamaño de paquete 18 cm x 8 cm x 5 cm (7,09 pulgadas x 3,15 pulgadas x 1,97 pulgadas) Cantidad por caja 356 Peso de la caja 30,00 kg/66,14 lb Tamaño de la caja 50 cm * 50 cm * 60 cm / 19,69 pulgadas * 19,69 pulgadas * 23,62 pulgadas Contenedor de carga 20GP: 177 cajas * 356 piezas = 63012 piezas 40HQ: 412 cajas * 356 piezas = 146672 piezas
£2.99 £0.99
-
Mira Sales Detector portátil de dióxido de carbono y formaldehído para calidad del aire CO2, higrómetro de temperatura interior con pantalla digital LED, semiconductor 5 en 1
1. Rango de detección de CO2: 400-6000 ppm 2. Sensibilidad de detección de CO2: 1 ppm 3. Rango de detección: 0-2 ppm 4. Rango de medición de temperatura: 0 ~ 60 grados Celsius 5. Precisión de medición de temperatura: +/-1 grado Celsius 6. Rango de medición de humedad: 0 % ~ 99 % HR 7. Precisión de medición de humedad: +/-2 % HR 8. Método de carga: Interfaz micro USB DC5V 500mA 9. Batería: Batería de litio incorporada de 1200 mAh. 10. Tamaño: 9 x 7 x 4 cm/3,54 x 2,75 x 1,18 pulgadas 11. Pantalla: aproximadamente 2,75 pulgadas 12. Peso neto: aproximadamente 175 g. característica: 1. Cinco en uno: se puede utilizar como detección de concentración de dióxido de carbono, termómetro e higrómetro al mismo tiempo. 2. Batería de litio incorporada de 1200 mha, completamente cargada, puede funcionar en modo de espera durante aproximadamente 6 a 8 horas. 3. Pantalla a color: muestra los datos actuales de CO2, temperatura y humedad. El anillo de color cambia según el contenido de CO2. 4. Operación simple: mantenga presionado el botón "on-off" durante 3 segundos para encender y apagar. Detectará automáticamente el CO2. 5. Pequeño y portátil: se puede colocar en la cocina, la sala de estar, el dormitorio o sacarlo. El paquete incluye: 1 x medidor de dióxido de carbono 1 x cable de carga USB 1 manual de instrucciones Especificación: Peso del paquete Peso de un paquete 0,19 kg/0,43 lb Un tamaño de paquete 12 cm x 12 cm x 5 cm (4,72 pulgadas x 4,72 pulgadas x 1,97 pulgadas) Cantidad por caja 100 Peso de la caja 20,00 kg/44,09 lb Tamaño de la caja 50 cm x 50 cm x 40 cm (19,69 pulgadas x 19,69 pulgadas x 15,75 pulgadas) Contenedor de carga 20GP: 266 cajas * 100 piezas = 26600 piezas 40HQ: 619 cajas * 100 piezas = 61900 piezas
£19.99
-
Mira Sales Medidor digital de TDS, comprobador de filtro, comprobador de pureza y calidad del agua, herramienta de prueba de minerales para agua potable
Tipo de pantalla: digital Con luz de fondo o no: No Suministros de bricolaje: electricidad Descripción del Producto Un medidor de TDS (también conocido como bolígrafo de ppm, comprobador de nutrientes, varilla de TDS) es una herramienta digital económica y conveniente para verificar instantáneamente la calidad general del agua. TDS = sólidos disueltos totales, que es cualquier sal, metal o mineral presente en el agua. Con solo presionar un botón, el TDS puede indicarle el nivel general de pureza del agua, que se mostrará en la pantalla en ppm (partes por millón). Cuanto menor sea el nivel de TDS, más pura será el agua; 0 ppm es H2O puro. El TDS es ideal para verificar la calidad del agua del grifo o saber cuándo cambiar un filtro. (El medidor no realiza pruebas de contaminantes biológicos). El TDS es una gran herramienta para agua potable, filtración y purificación de agua, plata coloidal, hidroponía (para probar los nutrientes), acuarios, sistemas de ósmosis inversa/difusión, piscinas y spas, aplicaciones comerciales e industriales y más. El TDS es un modelo resistente que incluye un estuche protector de transporte. Este es el medidor de TDS portátil más popular del mundo para profesionales de la industria. ts Ideal para uso comercial Incluye un estuche de transporte con clip para cinturón Función de sujeción: guarda las mediciones para una lectura y registro convenientes Altamente eficiente y preciso debido a su tecnología avanzada de microprocesador Termómetro digital incorporado, Pantalla: Pantalla LCD grande y fácil de leer. El medidor de agua digital TDS AquaLutio es ideal para probar aplicaciones como hidroponía y jardinería, piscinas y spas, acuarios y tanques de arrecife, ionizadores de agua, filtro de agua. agua potable y más. El medidor de agua TDS es ideal para probar aplicaciones de agua potable ideal, filtro de agua, filtros de carbón, agua de manantial, agua dura, agua del grifo promedio, filtro de agua de refrigerador, filtro de agua, filtro brita, ósmosis inversa, filtro de ósmosis inversa. Características 1. El medidor de agua TDS digital AquaLutio es ideal para probar aplicaciones como hidroponía y jardinería, piscinas y spas, acuarios y tanques de arrecife, ionizadores de agua, filtros de agua, agua potable y más. 2. Rango de medición: 0-9990 ppm, resolución de 1 ppm, precisión de lectura de +/- 2%. 3. Botón de temperatura: prueba la temperatura del agua, 31 - 200 grados F, resolución de 1 grado F. Precisión de lectura de +/- 2%. 4. Función: Guarda las mediciones para una lectura y registro convenientes. 5. Función de apagado automático: apaga el medidor después de 10 minutos de inactividad para conservar las baterías. 6. El medidor de TDS más pequeño y liviano disponible en el mercado. Altamente eficiente y preciso gracias a su avanzada tecnología de microprocesador. 7. Fuente de alimentación: 2 pilas de botón de 1,5 V (LR44) Especificación: Peso del paquete Peso de un paquete 0,07 kg/0,15 lb Un tamaño de paquete 16 cm x 3,6 cm x 2,5 cm (6,3 pulgadas x 1,42 pulgadas x 0,98 pulgadas) Cantidad por caja 200 Peso de la caja 12,00 kg/26,46 lb Tamaño de la caja 38 cm * 33 cm * 27 cm/14,96 pulgadas * 12,99 pulgadas * 10,63 pulgadas Contenedor de carga 20GP: 787 cajas * 200 piezas = 157400 piezas 40HQ: 1828 cajas * 200 piezas = 365600 piezas
£2.99 £0.99