Resultados de la búsqueda de "audio interfaces"

Features1. Mixing console The analog mixing console is combined with a digital sound card, with 6 channels, personalized function settings, and convenient console design, giving you a different tuning experience. 2. Intelligent noise reduction, high-fidelity sound quality, clear and bright vocals. 3. Built-in high-speed ARM chip, with unique low-noise, voice-changing, pitch-changing, reverberation, delay, electronic sound effects and other processing technologies. 4. For wireless Bluetooth connection, switch to Bluetooth mode, turn on the electronic device with Bluetooth function, and search for the connection. 5. Support audio equipment with USB2.0 interface, lossless sound quality playback, all in NA4 analog digital mixer. 6. The flexible LOOPBACK function is perfect for recording and webcasting. The LXR combined microphone input interface is adopted, and the level of the recording state is visible, which is convenient for flexible adjustment at any time.Specification1. Frequency response: 0.05%dB/-2.0dB (20Hz to 20kHz), refer to the rated output level @1kHz, GAIN knob: medium 2. Total harmonic distortion (THD+N): 0.02%@+10dBu (20Hz to 20kHz), GAIN knob: Medium 3. Noise (20Hz to 20kHz): residual output noise, -85dBu (STEREO OUT, STEREO LEVE), GAIN knob: small 4. Crosstalk (1kHz)*2: -83dB 5. Input/output impedance: Microphone input: 3k Ohm, line input: 10k Ohm Output: 150 Ohm (balanced) 75 Ohm (unbalanced) 6. AES digital signal input and output: 110 Ohm 7. Input channels: MIC*4, 2REC, PC, 2LINE, USB, BT, 3.5MINI 8. Output channel: STEREO OUT: 2, PHONES:1, 3.5MINI MAIN PH OUT:1, 2.GROUP PH:1.3.5MINI LOOP BACK output: 2.REC 9. Bus: Stereo: 1, GROUP:1. 10. Input channel function: HPF(Mono)80Hz,12dB/octave (CH3,4) EQ HIGH Gain: +15dB/-15dB frequency: 10kHz ramp frequency: EQ LOW Gain: +15dB/-15dB Frequency: 100kHz Ramp frequency: PEAK LED When the signal after EQ reaches 11. 3dB below the distortion, the LED lights up LED indication: MAIN STEREO LEVEL knob, the green light is on when the MAIN LEVEL signal reaches -10dB, and the red light is on when the signal reaches 3dB below the distortion 12. Input and output level: MIC (-60dB) LINE OUTPUT (-40dB) MAX OUT (+12dB) 13. USB audio: 2IN/2OUT USB audio 2.0 compatible, decoding rate: 48.1kHz, Bit depth: 24-bit 14. Effect category: independent volume adjustment effect: true digital effect processing 15. Phantom power supply voltage: support large diaphragm condenser microphone 16. Voltage adapter: DC 5V/2.0A standard24 types of DSPReverberation: 1. Simulate reverberation in small spaces such as concert halls 2. Simulate the reverberation of the acoustic environment of a small space (auditorium) 3. Simulate the reverberation in large spaces such as theaters 4. Echo of the Valley Electronic synthesis sound effects: 5. Electronic Mix (A flat major) 6. Electronic Mix (A major) 7. Electronic Mix (B-flat major) 8. Electronic Mix (B major) 9. Electronic Mix (C major) 10. Electronic Mix (D-flat major) 11. Electronic Mix (D major) 12. Electronic Mix (E-flat major) 13. Electronic Mix (E major) 14. Electronic Mix (F major) 15. Electronic Mix (G flat major) 16. Electronic Mix (G major) 17. Electronic mixing (semitone scale) Synthetic sound effect with altered voice: 18. Female Voice 19. Uncle Tone Flanger 20. Children Voice 21. Childish Echo 22. Magic Sound (Male) 23. Magic Sound Echo (Male) 24. Original SoundSpecification: Package Weight One Package Weight 1.27kgs / 2.81lb One Package Size 28cm * 26cm * 9cm / 11.02inch * 10.24inch * 3.54inch Qty per Carton 10 Carton Weight 13.05kgs / 28.77lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 10 pcs = 3480 pcs40HQ: 808 cartons * 10 pcs = 8080 pcs

Leer Más Menos

Features1. Mixing console The analog mixing console is combined with a digital sound card, with 6 channels, personalized function settings, and convenient console design, giving you a different tuning experience. 2. Intelligent noise reduction, high-fidelity sound quality, clear and bright vocals. 3. Built-in high-speed ARM chip, with unique low-noise, voice-changing, pitch-changing, reverberation, delay, electronic sound effects and other processing technologies. 4. For wireless Bluetooth connection, switch to Bluetooth mode, turn on the electronic device with Bluetooth function, and search for the connection. 5. Support audio equipment with USB2.0 interface, lossless sound quality playback, all in NA4 analog digital mixer. 6. The flexible LOOPBACK function is perfect for recording and webcasting. The LXR combined microphone input interface is adopted, and the level of the recording state is visible, which is convenient for flexible adjustment at any time.24 types of DSPReverberation: 1. Simulate reverberation in small spaces such as concert halls 2. Simulate the reverberation of the acoustic environment of a small space (auditorium) 3. Simulate the reverberation in large spaces such as theaters 4. Echo of the Valley Electronic synthesis sound effects: 5. Electronic Mix (A flat major) 6. Electronic Mix (A major) 7. Electronic Mix (B-flat major) 8. Electronic Mix (B major) 9. Electronic Mix (C major) 10. Electronic Mix (D-flat major) 11. Electronic Mix (D major) 12. Electronic Mix (E-flat major) 13. Electronic Mix (E major) 14. Electronic Mix (F major) 15. Electronic Mix (G flat major) 16. Electronic Mix (G major) 17. Electronic mixing (semitone scale) Synthetic sound effect with altered voice: 18. Female Voice 19. Uncle Tone Flanger 20. Children Voice 21. Childish Echo 22. Magic Sound (Male) 23. Magic Sound Echo (Male) 24. Original SoundSpecification1. Frequency response: 0.05%dB/-2.0dB (20Hz to 20kHz), refer to the rated output level @1kHz, GAIN knob: medium 2. Total harmonic distortion (THD+N): 0.02%@+10dBu (20Hz to 20kHz), GAIN knob: Medium 3. Noise (20Hz to 20kHz): residual output noise, -85dBu (STEREO OUT, STEREO LEVE), GAIN knob: small 4. Crosstalk (1kHz)*2: -83dB 5. Input/output impedance: Microphone input: 3k Ohm, line input: 10k Ohm Output: 150 Ohm (balanced) 75 Ohm (unbalanced) 6. AES digital signal input and output: 110 Ohm 7. Input channels: MIC*4, 2REC, PC, 2LINE, USB, BT, 3.5MINI 8. Output channel: STEREO OUT: 2, PHONES:1, 3.5MINI MAIN PH OUT:1, 2.GROUP PH:1.3.5MINI LOOP BACK output: 2.REC 9. Bus: Stereo: 1, GROUP:1. 10. Input channel function: HPF(Mono)80Hz,12dB/octave (CH3,4) EQ HIGH Gain: +15dB/-15dB frequency: 10kHz ramp frequency: EQ LOW Gain: +15dB/-15dB Frequency: 100kHz Ramp frequency: PEAK LED When the signal after EQ reaches 11. 3dB below the distortion, the LED lights up LED indication: MAIN STEREO LEVEL knob, the green light is on when the MAIN LEVEL signal reaches -10dB, and the red light is on when the signal reaches 3dB below the distortion 12. Input and output level: MIC (-60dB) LINE OUTPUT (-40dB) MAX OUT (+12dB) 13. USB audio: 2IN/2OUT USB audio 2.0 compatible, decoding rate: 48.1kHz, Bit depth: 24-bit 14. Effect category: independent volume adjustment effect: true digital effect processing 15. Phantom power supply voltage: support large diaphragm condenser microphone 16. Voltage adapter: DC 5V/2.0A standardSpecification: Package Weight One Package Weight 1.17kgs / 2.57lb One Package Size 28cm * 26cm * 9cm / 11.02inch * 10.24inch * 3.54inch Qty per Carton 10 Carton Weight 13.05kgs / 28.77lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 10 pcs = 3480 pcs40HQ: 808 cartons * 10 pcs = 8080 pcs

Leer Más Menos

1. You have one stereophonic signal source (TV audio frequency, player, video game, mobile phone, PAD, computer, gramophone) want to output to other equipment at the same time (example the power amplifier, loudspeaker box or prepose amplifier)2. This type product able to solve that 1 set stereophonic input able to distribute output 4 sets stereophonic,3. Output has volume adjustment function, output without sound amplify function, the output keep the original tone quality and volume same with the input.4. Input and output adopt 3.5mm earphone interface5. Simple installation: input and output, able to be used once inserted, convenient to install, input and output signal no consumption, then can enjoy different hearing experienceProduct Parameter1. Material: metal2. Interface: 3.5mm interface3. Power supply: USB 5V supply power4. Input and output impedance: 10KΩ - 50KΩ5. Frequency responding: 20 - 20kHz.6. Distortion: Less than 0.002%7. Output consumption: Less than 0.01dB8. Signal gain: 0dB9. Signal-noise ratio S/N: Greater than 98dB10. Input and output interface: Standard 3.5mm interface11. Input passageway: 1 set stereophonic input12. Output passageway: 4 sets stereophonic output at the same time (4 sets output unified volume adjustment)13. Single product net weight: 0.15 kg14. Product size: 87mm x 52mm x 22mmKit list1. B064 1 in 4 out audio frequency signal distribute device 3.5mm interface x 12. USB power supply wire (wire length 100cm) x 13. 3.5 public to public wire (wire length 100cm) x 1Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 11cm * 9cm * 5cm / 4.33inch * 3.54inch * 1.97inch Qty per Carton 100 Carton Weight 23.00kgs / 50.71lb Carton Size 52cm * 37cm * 27cm / 20.47inch * 14.57inch * 10.63inch Loading Container 20GP: 513 cartons * 100 pcs = 51300 pcs40HQ: 1191 cartons * 100 pcs = 119100 pcs

Leer Más Menos

B017 – Conmutador de selección de señal de audio de 6 entradas y 1 salida Control de ajuste de volumen de salida Interfaz de 3,5 mm Descripción del Producto: Conmutador de selección de señal de audio estéreo de 6 canales con función de ajuste del volumen de salida, El producto adopta un diseño pasivo, inserción directa y tiene transmisión conmutada sin pérdidas de señales de entrada y salida. El producto se utiliza principalmente para seleccionar y cambiar entre una variedad de entradas y salidas de señales estéreo a través de un conjunto común de equipos, es decir, una variedad de fuentes de señales estéreo de dispositivos, como audio de TV, reproductor de MP3, reproductor de CD, videojuego, teléfono móvil, tableta, computadora, tocadiscos, que necesitan emitirse en el amplificador o en parlantes activos. El conmutador de selección de señal de audio de 6 canales resuelve la complicada conexión y salida de línea, conectando de manera uniforme las fuentes de señal de entrada del dispositivo al conmutador para una fácil selección. El producto utiliza un diseño de interfaz estándar de 3,5 mm para entrada y salida, y utiliza un diseño de interruptor manual preciso de 6 niveles para el conmutador, con control de ajuste de volumen estéreo independiente. Parámetros del producto: Fuente de alimentación: diseño pasivo, inserción directa Material: caja totalmente metálica Impedancia de entrada y salida: 10KΩ - 50KΩ Respuesta de frecuencia: 20 – 20 kHz Distorsión: <0,002% Pérdida de inserción: <0,01 dB Ganancia de señal: 0dB Relación señal/ruido S/N: >98dB Puerto de entrada: interfaz estándar de 3,5 mm Puerto de salida: interfaz estándar de 3,5 mm Número de canales de entrada: 6 fuentes de señal de entrada estéreo Número de canales de salida: 1 canal de salida estéreo Interruptor de control: interruptor de selección manual preciso de 6 niveles Canal de conmutación: 6 canales Peso neto: 0,26 kg Peso bruto con embalaje: 0,36 kg Tamaño del producto: largo 109 mm X ancho 54 mm X alto 40 mm Tamaño del embalaje: largo 185 mm X ancho 135 mm X alto 65 mm Lista de equipo: 1 conmutador de selección de señal de audio estéreo de 6 entradas y 1 salida, ajuste de volumen de salida, interfaz de 3,5 mm Especificación: Peso del paquete Peso de un paquete 0,36 kg/0,80 lb Un tamaño de paquete 18,5 cm x 13,5 cm x 6,5 cm (7,28 pulgadas x 5,31 pulgadas x 2,56 pulgadas) Cantidad por caja 82 Peso de la caja 30,00 kg/66,14 lb Tamaño de la caja 80 cm x 58 cm x 28 cm (31,5 pulgadas x 22,83 pulgadas x 11,02 pulgadas) Contenedor de carga 20GP: 205 cajas * 82 uds. = 16810 uds. 40HQ: 476 cajas * 82 piezas = 39032 piezas

Leer Más Menos

1. Support sound channel: 7.1 sound channel2. Chip: 7.1 virtual surround sound3. cable core: 26AWG tinned copper4. Sampling rate: 16bit/48KHz5. Material: ABS+PVC 6. Cable length: about 20cm 7. Size: about 7.8 x 3.8 x 1.8cm8. Weight: about 27gFeatures:1. Extended sound card interface, connect headphones/earphones/speakers and other devices, listening to songs/entertainment more enjoyable2. One key to improve the sound quality of the phone, can be used for cell phone live broadcasting, Karaoke, recording and other scenarios3. Using intelligent noise reduction chip, the sampling rate up to 16bit/48KHZ, play music like live4. Using splicing technology, a line of dual-use, USB + Type-C5. Suitable for game consoles external audio/headphones, increase the volume of playback6. Support dual-port (headset) headset + single-port (cell phone) headset use at the same time7. Microphone, headset volume button adjustment8. One-key mute/no microphone function is activated, the indicator light is on.9. Easy to adjust the reverb sound, through the knob to adjust the strength of the reverb10. Male to female/female to male/baby voice/wraith voice easy to switch, voice effect can be memorized, plug and playSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 12cm * 6cm * 4cm / 4.72inch * 2.36inch * 1.57inch Qty per Carton 190 Carton Weight 10.60kgs / 23.37lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 190 pcs = 78280 pcs40HQ: 958 cartons * 190 pcs = 182020 pcs

Leer Más Menos

Descripción general Este módulo de audio de bajo consumo se basa en WM8960, admite codificación/decodificación estéreo, admite grabación de sonido y, además, puede controlar directamente los altavoces para reproducir música. Características 1. Integra un micrófono de silicio MEMS de alta calidad, admite grabación de sonido. 2. Conector para auriculares de 4 segmentos de 3,5 mm estándar integrado, que permite la grabación de sonido a través de auriculares externos con micrófono. 3. Interfaz de altavoz de doble canal integrada, que controla directamente los altavoces. 4. Admite frecuencias de muestreo de audio comunes como 8/11.025/22.05/44.1/48 KHz, etc. 5. Admite efectos de sonido como estéreo, envolvente 3D, etc. 6. Viene con recursos de desarrollo y manual (ejemplos de STM32 para reproducir y grabar) Presupuesto 1. CÓDEC: WM8960 2. Voltaje de funcionamiento: 3,3 V 3. Interfaz de control: I2C 4. Interfaz de audio: I2S 5. Formato de audio: WAV 6. Relación señal-ruido del DAC: 98dB 7. Relación señal-ruido del ADC: 94dB 8. Controlador de auriculares: 40 mW (16 Ω a 3,3 V) 9. Controlador de altavoz: 1 W por canal (8 Ω BTL) Especificación: Peso del paquete Peso de un paquete 0,02 kg/0,04 lb Un tamaño de paquete 7 cm x 4 cm x 2 cm (2,76 pulgadas x 1,57 pulgadas x 0,79 pulgadas) Cantidad por caja 1600 Peso de la caja 15,00 kg/33,07 lb Tamaño de la caja 56 cm * 40 cm * 40 cm / 22,05 pulgadas * 15,75 pulgadas * 15,75 pulgadas Contenedor de carga 20GP: 297 cajas * 1600 piezas = 475200 piezas 40HQ: 690 cajas * 1600 piezas = 1104000 piezas

Leer Más Menos

1) Supports AES/EBU,IEC60958,S/PDIF consumer formats for stereo PCM audio 2) Fixed 48KHz sampling rate for 5.1 channel playback 3) Supports digital recording function with 32khz, 44khz and 48khz sampling rates 4) Supports analog recording function 5) Supports SCMS (Serial Copy Management System) copy protection 6) Compatible with Win98SE,ME,2000,XP,Mac OS 9.1 (Mac version has 2 channel playback only) 7) Fully duplex playback/recording audio stream without sound card in PC 8) Compliant with USB specification v1.1 9) Compliant with USB audio device class v1.0 10) Supports USB full speed 12Mbit serial data transmission 11) 3 input terminals 12) 3 output terminals 13) Alternate setting 0 is a zero bandwidth setting used to release the claimed bandwidth on the bus when this device is inactive 14) Isochronous transfer uses adaptive and asynchronous synchronization 15) Supports multi channels audio code interface for 5.1 channel playback 16) Supports conventional audio 2 channels source playback (only L, R, channel active) 17) Plug and Play under windows without external memorySpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 21cm * 15.5cm * 6.8cm / 8.27inch * 6.1inch * 2.68inch Qty per Carton 40 Carton Weight 6.76kgs / 14.90lb Carton Size 43cm * 33cm * 48cm / 16.93inch * 12.99inch * 18.9inch Loading Container 20GP: 391 cartons * 40 pcs = 15640 pcs40HQ: 908 cartons * 40 pcs = 36320 pcs

Leer Más Menos

1. Plug in your favorite guitar and turn your PC or Mac computer into a guitar amp and recording system without the need for any other hardware. 2. Work directly with your PC or Mac computer. 3. Stereo Headphone output lets you jam with your computer and can also be used for monitoring with active monitor speakers. 4. Variable-speed file playback function for MP3, WAV, AIFF audio files. Perfect for easy learning and practicing. 5. Powered via USB. No additional power supply required. 6. High-quality components and exceptionally rugged construction ensure long life 7. The ultimate guitar to USB interface to jam and record with killer modeling amps and effects.Specification: General Material ABS Size 9.5*5*2cm Weight 62g Package Include Package Contents 1 x CD Driver 1 x Manual Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 24cm * 15cm * 3cm / 9.45inch * 5.91inch * 1.18inch Qty per Carton 50 Carton Weight 8.50kgs / 18.74lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 50 pcs = 26000 pcs40HQ: 1209 cartons * 50 pcs = 60450 pcs

Leer Más Menos

The USB 2.1 Channel Sound Adapter is a highly flexible audio interface which can be used either with Desktop or Notebook systems. No drivers required, just plug and play for instant audio playback, also compatible with all major operation systems. 1) Complaint with USB 2.0 Full-Speed (12Mbps) Specification. 2) Compliant with USB Audio Device Class Specification 1.0 3) Compliant with USB HID Class Specification 1.1 4) USB BUS-Powered mode, no external power required 5) Connectors: USB Type-A, Stereo output jack, mono microphone input jack 6) Driverless-No driver required for windows 98 SE/ME/2000/XP/Server 2003/Vista, Linux, Mac OS.Specification: Package Weight One Package Weight 0.04kgs / 0.09lb Qty per Carton 40 Carton Weight 1.08kgs / 2.38lb Carton Size 32cm * 28cm * 31cm / 12.6inch * 11.02inch * 12.2inch Loading Container 20GP: 960 cartons * 40 pcs = 38400 pcs40HQ: 2228 cartons * 40 pcs = 89120 pcs

Leer Más Menos

About The Product1. LINEPAUDIO A967 Passive PreAmp Active Speak Volume Two-Channel Controller is small and compact, applicable to use with active speaker or PostAmp, supports full-balanced or single-ended signal I/O, equipped with a switch for easily switching I/O signal. 2. Infinitely picky about the sound quality, infinitely tolerant on music. Passive PreAmp Volume Controller makes the desktop simple. 3. Small size but great wisdom, LINEPAUDIO A967 is tiny but with a complete set of common interfaces, supports full-balanced audio signal regulation and single-ended audio signal regulation, and switches I/O signal. 4. Suitable for the decoder and speaker without volume regulation, with the balanced I/O, RCA I/O architecture and switch function enabled. Its PreAmp will not cause a loss of signal source. In general, the audio source signals out of the decoder reproduces the original signals. The large dynamic range will not cause a quality loss, but keep the original signal source intact. 5. The preferred choice of active speaker, more and more music fans are not satisfied with the sound quality performance of common multimedia speakers, but rather select professional active monitor speakers. But such speakers generally don't have a volume regulation knob, but have to use with PreAmp. Most active monitor headphones are used for the desktop near-field listening, but a common HiFi PreAmp is large and occupies a large area. Moreover, most are concerned about whether the timbre of PreAmp matches the speaker or not, whether the sound effect is ideal or not. 6. But from now on, LINEPAUDIO A967 Two-Channel Volume Controller perfectly addresses the above two concerns, LINEPAUDIO A967 is small and compact, the internal circuit architecture design will not cause a loss of sound quality, the internal power amplifier of active speaker is enough to drive the speaker, so that you can hear the most genuine timbre and quality of the speaker, free from the need of choosing a suitable PreAmp.Features1. Input/Output impedance: 10Kohms - 50Kohms. 2. Two-channel I/O switch, RCA and Balanced XRL I/O. 3. Input: RCA / Balanced XLR (switch). 4. Output: RCA / Balanced XLR (switch).Specification: General Model A967 Material Metal Size 145*65*43mm Weight 314g Package Weight One Package Weight 0.46kgs / 1.00lb One Package Size 20cm * 18cm * 5.5cm / 7.87inch * 7.09inch * 2.17inch Qty per Carton 20 Carton Weight 9.13kgs / 20.13lb Carton Size 42cm * 38cm * 30cm / 16.54inch * 14.96inch * 11.81inch Loading Container 20GP: 556 cartons * 20 pcs = 11120 pcs40HQ: 1292 cartons * 20 pcs = 25840 pcs

Leer Más Menos