Resultados de la búsqueda de "In Car Accessories"

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.78kgs / 6.13lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Leer Más Menos

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 15-19dBm, Downlink 15-19dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 186 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.39kgs / 3.07lb One Package Size 31cm * 20cm * 11cm / 12.2inch * 7.87inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 42cm * 33cm * 24cm / 16.54inch * 12.99inch * 9.45inch Loading Container 20GP: 801 cartons * 4 pcs = 3204 pcs40HQ: 1861 cartons * 4 pcs = 7444 pcs

Leer Más Menos

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.58kgs / 3.48lb One Package Size 31cm * 23cm * 11cm / 12.2inch * 9.06inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 48cm * 33cm * 24cm / 18.9inch * 12.99inch * 9.45inch Loading Container 20GP: 701 cartons * 4 pcs = 2804 pcs40HQ: 1628 cartons * 4 pcs = 6512 pcs

Leer Más Menos

Specifications1. CPU: MediaTek Dimensity 7400X, octa-core, 4nm, 4x Arm Cortex-A78 up to 2.6GHz + 4x Arm Cortex-A55 2. GPU: Arm Mali-G615 MC2, 1.0GHz 3. Memory: 16GB LPDDR5 RAM (+ 16GB Dynamic, The Dynamic RAM can be extended in Settings if needed. ) + 512GB UFS 3.1 ROM 4. Storage Extend: TF card up to 2TB (not included) 5. Operating system: Android 15 6. Sensor: Proximity Sensor, Gravity sensor, Light Sensor, Acceleration Sensor, Geomagnetic sensor, Gyro sensor, Coulomb counter, Pedometer, Air pressure sensor, Infrared sensor 7. Card Slots: 3, 1x Nano-SIM + 1x Nano-SIM + 1x microSD 8. Keys: Right: Power button (Fingerprint)+Volume button+Camera Key, Left: Custom Key 9. USB: Type-C, USB 2.0; Headphone Jack: 3.5mm 10. Battery: 25500mAh lithium-ion polymer battery; Charge: 66W, 11V 6A / 11V 3A 11. Unlock Options: Fingerprint Unlock, Face Unlock 12. Expansion Connector: uSmart Expansion Connector 2.0, suppors uSmart series accessories, allows simultaneous charging while the uSmart Connector is in use. 13. Language: Indonesian, Malay, Catalan, Czech, Danish, German, Estonian, English, Spanish, Filipino, French, Croatian, Italian, Latvian, Lithuanian, Hungarian, Dutch, Norwegian, Polish, Portuguese, Romanian, Slovak, Finnish, Swedish, Vietnamese, Greek, Turkish, Bulgarian, Russian, Serb, Ukrainian, Armenian, Hebrew, Urdu, Arabic, Persian, Hindi, Bengali, Thai, Kor., Burmese, Japanese, Simplified Chinese, Traditional Chinese 14. Dimensions: 183.1 x 86.6 x 32.7mm 15. Weight: 763g Screen: 1. Size: 6.95 inch, 120Hz, 20.5:9 2. Resolution: 1080 x 2460 FHD+, 387PPI 3. Screen-to-Body Ratio: 87% 4. Multi-touch: 10 Cameras: 1. Rear Camera: 50MP Main (OV50H, f1.95) + 64MP Night Vision (OV64B , f1.79) + 2MP Ultra Wide (JN1, f2.2) 2. Front camera: 32MP(GD2, f2.45)Network1. 5G NR Sub6: N1/2/3/5/7/8/20/25/28/38/40/41/66/71/77/78/79 2. 4G: FDD-LTE: B1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28A/28B/32/66/71; TDD-LTE: B34/38/39/40/41 3. 3G WCDMA: B1/2/4/5/6/8/19 4. 2G GSM: B2/3/5/8 5. Support 4G VoLTE, VoNR 6. Wi-Fi: WiFi 6E (2.4GHz/5GHz/6GHz), 802.11a/b/g/n/ac/ax 7. BT: V5.4 8. Navigation: GPS, GLONASS, Beidou, Galileo, QZSS, NavlC GPS 9. OTG: Support 10. NFC: SupportSpecial FeaturesVersatile LED Light 1. LED Beads: 585 Pieces 2. Brightness: Max 1100 lumens 3. Light Powe: Max 6.5W 4. Shortcut Key: Support, Custom Key 5. APP: Camping Light 6. Modes: Lighting, adjustable brightness settings; duration settings of 5-30mins. Sharp Light, duration settings of 5-30mins. SOS, AlwaysLighting 7. Safety Protection: Support Warning Light 1. APP: RedBluePoliceLight 2. LED Beads: 36 Pieces 3. Simulated Light Effect: Red Light, Blue Light, Red-Blue Light 4. Simulated Warning Sound: Fire, Ambulance, Police Car, and other first responding warning sound 5. Lighting Modes: 2, Constant or BlinkPackage List1. Phone x 1 2. AC Power Charger, 66W x 1 3. Type-C to Type-C Data Cable (100cm) x 1 4. Protective Film (Pre-installed) x 1 5. Tempered Glass Screen Protector x 1 6. SIM Needle x 1 7. Lanyard x 1 8. Multi-language User Manual x 1 9. Warranty Card x 1 10. Charging Instruction Card x 1 11. Safety Prompt Card x 1Specification: General Certificate MSDS, RCM Package Weight One Package Weight 1.22kgs / 2.69lb One Package Size 21cm * 14cm * 10cm / 8.27inch * 5.51inch * 3.94inch Qty per Carton 10 Carton Weight 12.50kgs / 27.56lb Carton Size 42cm * 24cm * 32cm / 16.54inch * 9.45inch * 12.6inch Loading Container 20GP: 826 cartons * 10 pcs = 8260 pcs40HQ: 1919 cartons * 10 pcs = 19190 pcs

Leer Más Menos

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz, GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain 65dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Automatic Gain Control >20dB Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <2 MTBF >50000h Power Supply AC:90~265V, 50/60Hz; DC:12V 2A Power Consumption <20W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 4.95kgs / 10.92lb One Package Size 43cm * 22cm * 24cm / 16.93inch * 8.66inch * 9.45inch Qty per Carton 4 Carton Weight 13.40kgs / 29.54lb Carton Size 46cm * 46cm * 50cm / 18.11inch * 18.11inch * 19.69inch Loading Container 20GP: 252 cartons * 4 pcs = 1008 pcs40HQ: 585 cartons * 4 pcs = 2340 pcs

Leer Más Menos

1. Adecuado para limpiar alrededor de artículos frágiles y algunos lugares inconvenientes como rejillas de ventilación, teclados, cajones, persianas, casas, automóviles, etc. 2. Material: ABS 3. Función: Limpieza 4. Entorno de uso: hogar 5. Flexible y duradero, no se daña fácilmente. Especificación: Peso del paquete Peso de un paquete 0,14 kg/0,30 lb Un tamaño de paquete 18 cm x 8 cm x 5 cm (7,09 pulgadas x 3,15 pulgadas x 1,97 pulgadas) Cantidad por caja 224 Peso de la caja 30,00 kg/66,14 lb Tamaño de la caja 50 cm * 50 cm * 60 cm / 19,69 pulgadas * 19,69 pulgadas * 23,62 pulgadas Contenedor de carga 20GP: 177 cajas * 224 piezas = 39648 piezas 40HQ: 412 cajas * 224 piezas = 92288 piezas

Leer Más Menos

Why to use1. Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save life of somebody. 2. Unfortunately, there are still some places where one can find themselves out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: 1) Parking lots, tunnels 2) Big stores, office buildings 3) Cars, boats etc. 4) House in remote areas etcFeatures1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode. 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableHow to work1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax). 2. After the signal is accepted by the phone amplifier, the device amplifies it. 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna. 4. And after that, the amplified signal transmits to the cell phoneHow to install1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar). 2. Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signalNotes1. Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least. 2. Indoor and outdoor antenna must be separated by wallTechnique supports1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 53-57dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 2A Power Consumption <5W RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 100mm x 45mm x 18mm Weight 350g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.00kgs / 2.20lb One Package Size 51cm * 18cm * 13cm / 20.08inch * 7.09inch * 5.12inch Qty per Carton 4 Carton Weight 5.20kgs / 11.46lb Carton Size 53cm * 38cm * 28cm / 20.87inch * 14.96inch * 11.02inch Loading Container 20GP: 472 cartons * 4 pcs = 1888 pcs40HQ: 1097 cartons * 4 pcs = 4388 pcs

Leer Más Menos

Why to use1. Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save life of somebody. 2. Unfortunately, there are still some places where one can find themselves out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: 1) Parking lots, tunnels 2) Big stores, office buildings 3) Cars, boats etc. 4) House in remote areas etcFeatures1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode. 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableHow to work1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax). 2. After the signal is accepted by the phone amplifier, the device amplifies it. 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna. 4. And after that, the amplified signal transmits to the cell phoneHow to install1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar). 2. Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signalNotes1. Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least. 2. Indoor and outdoor antenna must be separated by wallTechnique supports1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 53-57dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 2A Power Consumption <5W RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 100mm x 45mm x 18mm Weight 350g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.59kgs / 3.51lb One Package Size 51cm * 18cm * 13cm / 20.08inch * 7.09inch * 5.12inch Qty per Carton 4 Carton Weight 5.75kgs / 12.67lb Carton Size 53cm * 38cm * 28cm / 20.87inch * 14.96inch * 11.02inch Loading Container 20GP: 472 cartons * 4 pcs = 1888 pcs40HQ: 1097 cartons * 4 pcs = 4388 pcs

Leer Más Menos

1.Pantalla del panel: LCD de 3,5 pulgadas 2. Color de la pantalla: Pantalla a color 3.HDMI: salida HDMI (hasta 1080P) 4. Capacidades del sistema: Full HD DVB-S/S2 y H.265 compatible, totalmente compatible con DVB 5. Tamaño del producto: 95 x 155 x 45 mm 6. Número de canales: 6000 canales de TV y radio programables. 7. Favoritos: selección de 8 grupos de favoritos diferentes 8. Idioma OSD: inglés, alemán, francés, portugués, español, italiano, ruso, turco, polaco, árabe, farsi, español y alemán. 9. Color OSD: OSD de 16 bits con antiparpadeo 10. Búsqueda de canales: Búsqueda de canales en modo automático, manual y búsqueda de red. 11. Batería de Li-oN: Batería de 3000 mA 12. Fuente de alimentación: CC 12 V/1500 mA (entrada 100 V-240 V, 50/60 Hz) Accesorios Medidor de satélite digital x1 Manual de usuario x1 Cable AV x1 Cable cargador de coche x1 Adaptador x1 Correa de bolsa de transporte x1 Especificación: Peso del paquete Peso de un paquete 0,78 kg/1,73 lb Un tamaño de paquete 24 cm x 18 cm x 5,8 cm (9,45 pulgadas x 7,09 pulgadas x 2,28 pulgadas) Cantidad por caja 10 Peso de la caja 9,60 kg/21,16 lb Tamaño de la caja 37 cm x 31 cm x 26 cm (14,57 pulgadas x 12,2 pulgadas x 10,24 pulgadas) Contenedor de carga 20GP: 894 cartones * 10 uds. = 8940 uds. 40HQ: 2075 cajas * 10 piezas = 20750 piezas

Leer Más Menos

Specifications1. CPU: MediaTek Dimensity 7400X, octa-core, 4nm, 4x Arm Cortex-A78 up to 2.6GHz + 4x Arm Cortex-A55 2. GPU: Arm Mali-G615 MC2, 1.0GHz 3. Memory: 16GB LPDDR5 RAM (+ 16GB Dynamic, The Dynamic RAM can be extended in Settings if needed. ) + 512GB UFS 3.1 ROM 4. Storage Extend: TF card up to 2TB (not included) 5. Operating system: Android 15 6. Sensor: Proximity Sensor, Gravity sensor, Light Sensor, Acceleration Sensor, Geomagnetic sensor, Gyro sensor, Coulomb counter, Pedometer, Air pressure sensor, Infrared sensor 7. Card Slots: 3, 1x Nano-SIM + 1x Nano-SIM + 1x microSD 8. Keys: Right: Power button (Fingerprint)+Volume button+Camera Key, Left: Custom Key 9. USB: Type-C, USB 2.0; Headphone Jack: 3.5mm 10. Battery: 25500mAh lithium-ion polymer battery; Charge: 66W, 11V6A/11V3A 11. Unlock Options: Fingerprint Unlock, Face Unlock 12. Expansion Connector: uSmart Expansion Connector 2.0, suppors uSmart series accessories, allows simultaneous charging while the uSmart Connector is in use. 13. Language: Indonesian, Malay, Catalan, Czech, Danish, German, Estonian, English, Spanish, Filipino, French, Croatian, Italian, Latvian, Lithuanian, Hungarian, Dutch, Norwegian, Polish, Portuguese, Romanian, Slovak, Finnish, Swedish, Vietnamese, Greek, Turkish, Bulgarian, Russian, Serb, Ukrainian, Armenian, Hebrew, Urdu, Arabic, Persian, Hindi, Bengali, Thai, Kor., Burmese, Japanese, Simplified Chinese, Traditional Chinese 14. Features: Infinite Halo 2.0, Versatile LED Light, Warning Light, Projector 15. Dimensions: 183.1 x 86.6 x 32.7mm 16. Weight: 825g Screen: 1. Size: 6.95 inch, 120Hz, 20.5:9 2. Resolution: 1080 x 2460 FHD+, 387PPI 3. Screen-to-Body Ratio: 87% 4. Multi-touch: 10 Cameras: 1. Rear Camera: 50MP Main (OV50H, f1.95) + 64MP Night Vision (OV64B , f1.79) + 50MP Ultra Wide (JN1, f2.2) 2. Front camera: 32MP(GD2, f2.45)Network1. 5G NR Sub6: N1/2/3/5/7/8/20/25/28/38/40/41/66/71/77/78/79 2. 4G: FDD-LTE: B1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28A/28B/32/66/71; TDD-LTE: B34/38/39/40/41 3. 3G WCDMA: B1/2/4/5/6/8/19 4. 2G GSM: B2/3/5/8 5. Support 4G VoLTE, VoNR 6. Wi-Fi: WiFi 6E (2.4GHz/5GHz/6GHz), 802.11a/b/g/n/ac/ax 7. BT: V5.4 8. Navigation: GPS, GLONASS, Beidou, Galileo, QZSS, NavlC GPS 9. OTG: Support 10. NFC: SupportSpecial FeaturesVersatile LED Light 1. LED Beads: 585 Pieces 2. Brightness: Max 1100 lumens 3. Light Powe: Max 6.5W 4. Shortcut Key: Support, Custom Key 5. APP: Camping Light 6. Modes: Lighting, adjustable brightness settings; duration settings of 5-30mins. Sharp Light, duration settings of 5-30mins. SOS, AlwaysLighting 7. Safety Protection: Support Warning Light 1. APP: RedBluePoliceLight 2. LED Beads: 36 Pieces 3. Simulated Light Effect: Red Light, Blue Light, Red-Blue Light 4. Simulated Warning Sound: Fire, Ambulance, Police Car, and other first responding warning sound 6. Lighting Modes: 2, Constant or Blink Projector 1. APP: Projector 2. Brightness: 150 lumens max 3. Upward Throw Angle Design: Support 4. Keystone Correction: +/-40 degrees Manual Vertical Keystone Correction 5. Auto Focus: Support 6. Throw Ratio: 1.3:1 7. DMD: 0.2 inch 8. Resolution: 854 x 480 9. Offset: 100% 10. Image Size: 30 inch -100 inch 11. Throw Distance: 34.02 inch - 113.75 inch1. Phone x 1 2. AC Power Charger, 66W x 1 3. Type-C to Type-C Data Cable (100cm) x 1 4. Protective Film (Pre-installed) x 1 5. Tempered Glass Screen Protector x 1 6. SIM Needle x 1 7. Lanyard x 1 8. Multi-language User Manual x 1 9. Warranty Card x 1 10. Charging Instruction Card x 1 11. Safety Prompt Card x 1Specification: General Certificate MSDS, RCM Package Weight One Package Weight 1.35kgs / 2.98lb One Package Size 25cm * 15cm * 8cm / 9.84inch * 5.91inch * 3.15inch Qty per Carton 10 Carton Weight 14.30kgs / 31.53lb Carton Size 42cm * 25cm * 32cm / 16.54inch * 9.84inch * 12.6inch Loading Container 20GP: 793 cartons * 10 pcs = 7930 pcs40HQ: 1842 cartons * 10 pcs = 18420 pcs

Leer Más Menos

Parámetro 1. CPU: CPU ARM® Cortex™ A55 de cuatro núcleos y 64 bits Amlogic S905X3 2. GPU: Procesador GPU G31™ MP2 3. Wi-Fi: IEEE 802.11 a/b/g/n/ac; 2,4 G/5 G 4. Bluetooth: BT; compatible con control remoto por voz 5. Alimentación: CC 5 V/2 A 6. Sistema operativo: Android 9.0 7. Especificación: 2 GB + 16 GB E/S 1. 1xHDMI: HDMI 2.1, compatible con HDMI CEC, HDR dinámico y salida de resolución máxima de 8Kx4K a 24 2. 1xAV OUT: salida de definición estándar 480i/576i 3. 2 x USB: 1 x USB 3.0; 1 x USB 2.0 4. 1 receptor IR: Conexión del receptor remoto 5. 1xRJ45: Interfaz Ethernet; compatible con 10/100M/1000M 6. 1 TARJETA TF: compatible con 2 GB/16 GB Aplicaciones 1. En línea: navegue por todos los sitios web de videos, compatible con Netflix, Hulu, Flixster, Youtube, etc. 2. Aplicaciones: Las aplicaciones se descargan libremente desde Android Market, Amazon App Store, etc. 3. Medio: Reproducción de medios locales, compatible con HDD, disco U, tarjeta TF. 4. Hablar en línea: admite videollamadas de SKYPE, MSN, Facebook, Twitter, QQ, etc. 5. Otros: Soporte por correo electrónico, traje de oficina, etc. 6. Admite función DLNA 7. Admite mouse y teclado inalámbricos de 2,4 G 8. Imagen: HD JPEG〠BMP〠GIF〠PNG〠TIF 9. Idioma: Inglés Francés Alemán Español Italiano etc. idiomas multilaterales Accesorios 1. Cable HDMI x1 2. Control remoto por infrarrojos x1 3. Manual de usuario x1 4. Caja de embalaje x1 5. Adaptador de corriente x1 Especificación: Peso del paquete Peso de un paquete 0,45 kg/1,00 lb Un tamaño de paquete 21 cm x 15 cm x 5 cm (8,27 pulgadas x 5,91 pulgadas x 1,97 pulgadas) Cantidad por caja 20 Peso de la caja 10,50 kg/23,15 lb Tamaño de la caja 23 cm x 32 cm x 52 cm (9,06 pulgadas x 12,6 pulgadas x 20,47 pulgadas) Contenedor de carga 20GP: 696 cajas * 20 uds. = 13920 uds. 40HQ: 1617 cajas * 20 piezas = 32340 piezas

Leer Más Menos

1. Función de arranque suave 2. La eficiencia de conversión alcanza el 97 % 3. Frecuencia de conmutación de 220 Khz 4. Chip convertidor reductor con interruptor síncrono incorporado 5. Rango de voltaje de salida: 3 V a 12 V, ajustado automáticamente de acuerdo con el protocolo de carga rápida. 6. Se utiliza en cargadores de coche, adaptadores de carga rápida, regletas de enchufes inteligentes, cargadores solares, etc. 7. Este módulo es un módulo de carga rápida con caída de presión de 4 vías, utilice una fuente de alimentación de CC de 12 V-30 V y los polos positivo y negativo no se pueden invertir. 8. Rango de voltaje de entrada: 4,5 V a 32 V (el voltaje de entrada debe ser mayor que el voltaje de salida, porque es un módulo de caída de voltaje) 9. Múltiples protecciones, alta confiabilidad, sobrecorriente de salida, sobrevoltaje de entrada, subvoltaje de entrada, protección contra cortocircuito de salida, protección contra sobretemperatura de toda la máquina. 10. La salida tiene características CV/CC (la corriente de salida es menor que el valor establecido, modo CV de salida; la corriente de salida es mayor que el valor establecido, modo CC de salida) 11. La PCB adopta un diseño FR-4 de 1,6 mm de espesor, diseño y cableado optimizados, diseño ajustado, ventana abierta en la parte posterior para disipación de calor, baja temperatura de trabajo a plena carga, corriente de espera 0,013 A, el módulo tiene función de compensación de voltaje de salida 12. Cada uno de los cuatro canales admite el protocolo de carga rápida QC 3.0 y puede admitir una carga rápida al mismo tiempo, y puede generar un voltaje de 5 V/9 V/12 V (requiere compatibilidad con el protocolo de teléfono móvil), la corriente de salida es adaptativa, consumo de energía de un solo canal 24 W, consumo de energía del módulo de 4 canales 96 W Especificación: Peso del paquete Peso de un paquete 0,05 kg/0,11 lb Un tamaño de paquete 10 cm x 6 cm x 2 cm (3,94 pulgadas x 2,36 pulgadas x 0,79 pulgadas) Cantidad por caja 200 Peso de la caja 11,00 kg/24,25 lb Tamaño de la caja 52 cm x 32 cm x 42 cm (20,47 pulgadas x 12,6 pulgadas x 16,54 pulgadas) Contenedor de carga 20GP: 381 cajas * 200 piezas = 76200 piezas 40HQ: 885 cajas * 200 piezas = 177000 piezas

Leer Más Menos