Resultados de la búsqueda de "In Car Accessories"

1. Material: controller (aluminum alloy shell, capacitor, circuit board, wiring harness), instrument (ABS shell, LCD screen, electronic chip)2. Small size, light weight, LCD brightness binning3. The monitor is made of high quality material, light weight, rainproof and durable.4. The LCD display can clearly display the status and data, the backlight allows you to see the screen clearly in the dim environment, the button operation is quick and easy to use5. The controller is brushless, works silently, and is sensitive to the state of the electric bicycle6. Easy to install and use, with bracket for LCD display, suitable for 22.5mm handlebar7. Suitable for electric bikes, cars, scooters8. Power: 250W / 350W9. Low voltage protection: 24V-36V=19V / 30V; 36V-48V=30V-41V10. Controller size: about 8.5 x 5.2 x 3 cm11. Display size: about 8 x 5 cm / 3.15 x 1.97 inchespacking list:LCD monitor x 1Controller x 1Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 22cm * 11cm * 6cm / 8.66inch * 4.33inch * 2.36inch Qty per Carton 82 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 82 pcs = 14514 pcs40HQ: 412 cartons * 82 pcs = 33784 pcs

Leer Más Menos

1. Exquisite small, do not take up space, used in the car, enjoy the fog of water vapor 2. Deep moisture, meticulous. Micro-molecules easily penetrate the skin surface, direct to base layer, keep the cells full of water. 3. Comes with colorful night light, quiet night, help you have a good sleep. 4. Transparent visual water tank, keep abreast of the remaining water, water in advance, moisturizing worry. 5. More details of the design: anti-skid at the bottom, USB universal interface; smooth switch control lights and so on.Specification: General Material ABS, PP, Silicone Capacity 180ml Mist Output 35ml/h Output Voltage DC 5V Output Current 400mA Size 10*15cm Weight 225g Package Include Package Contents 1 x User Manual 1 x Humidifier 1 x USB Cable Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 15.5cm * 13.3cm * 13.3cm / 6.1inch * 5.24inch * 5.24inch Qty per Carton 20 Carton Weight 7.20kgs / 15.87lb Carton Size 51cm * 36cm * 37cm / 20.08inch * 14.17inch * 14.57inch Loading Container 20GP: 392 cartons * 20 pcs = 7840 pcs40HQ: 911 cartons * 20 pcs = 18220 pcs

Leer Más Menos

1. Voltage: USB charging DC5V, you can use car charger, computer USB, power bank, etc.2. Charging time: about 2.5 hours3. Motor speed: about 10900RPM4. Battery type: Lithium battery 1200 mAh, lasting about 120 minutes, depending on personal usage habits and cleaning methodsThe main function:1. Remove dead skin, calluses and cuticles.2. Equipped with 3 types of grinding heads, coarse/fine/polishing.3. LED intelligent digital display to grasp real-time information4. 3-speed speed adjustment5. Overcharge and over-discharge protection system, heavy pressure induction protection6. Streamlined appearance design, anti-slip handle, ergonomic7. 1200 mAh large-capacity lithium battery, fast charging, long-lasting battery life, low noise8. This machine is waterproof. After microdermabrasion, the head can be rinsed separately, or the whole machine can be rinsed under the faucet (do not soak in water for a long time).?Specification: Package Weight One Package Weight 0.33kgs / 0.73lb One Package Size 20cm * 15cm * 6cm / 7.87inch * 5.91inch * 2.36inch Qty per Carton 48 Carton Weight 15.50kgs / 34.17lb Carton Size 47cm * 44cm * 41cm / 18.5inch * 17.32inch * 16.14inch Loading Container 20GP: 314 cartons * 48 pcs = 15072 pcs40HQ: 730 cartons * 48 pcs = 35040 pcs

Leer Más Menos

1. Waterproof and dustproof level: IP652. Charging interface: USB Type-C3. Battery capacity: 3.7V 700mAh4. Remote control distance: 30~70 meters5. Transmitting and receiving frequency: 433.92MHz6. Remote control battery:- WLO3C: 1 27A (12V) alkaline battery, daily use 1~2 years (remote control 5 times a day)- WLO9C: 1 CR2032 (3V) button battery, daily use 2~4 years (remote control 5 times a day)8. Daily use 1~3 months, continuous standby for about 6 months, constant light 16 hours, flashing 65 hours9. The host is fully charged in 2~3 hours, and the standby is about 4~8 months10. When the host power is less than 15, a low-power reminder sound will be played to remind you to charge in time11. Adapt to various harsh environments, waterproof and dustproof, sun-proof and drop-proof12. Anti-theft alarm, 110dB volume, three-dimensional sensor, 360-degree all-round sensing13. PCB high-gain antenna, long wireless remote control distance, remote control distance in open areas up to 30-70 meters, 3 kinds of electric bell tones, convenient for finding the car in the parking lot14. Tail light size: 75x57mm15. Remote control size: 03C 32x61mm, 09C 35x65mmSpecification: Package Weight One Package Weight 0.18kgs / 0.40lb One Package Size 14cm * 11cm * 6cm / 5.51inch * 4.33inch * 2.36inch Qty per Carton 80 Carton Weight 14.90kgs / 32.85lb Carton Size 46cm * 40cm * 30cm / 18.11inch * 15.75inch * 11.81inch Loading Container 20GP: 483 cartons * 80 pcs = 38640 pcs40HQ: 1121 cartons * 80 pcs = 89680 pcs

Leer Más Menos

1. Material: plastic + liquid crystal + metal2. The display uses high-quality materials, light weight, rainproof, strong and durable.3. The LCD display can clearly display the status and data, the backlight allows you to see the screen clearly in a dim environment, the buttons are quick and easy to use4. The controller is brushless, works silently, and is sensitive to the state of the electric bicycle5. Easy to install and use, with a bracket for LCD display, suitable for 22.5mm handlebars6. Suitable for electric bicycles, cars, scooters7. Power: 250W / 350W8. Low voltage protection: 24V-36V=19V / 30V; 36V-48V=30V-41V9. Waterproof: rainproof10. Controller size: about 8.8 x 5.2 x 3 cm / 3.46 x 2.04 x 1.18 inches11. Display size: about 8 x 5 cm/3.15 x 1.97 inches12. Weight: about 332 gramsNote: each cable is marked with a color for different purposes1. Red: positive power supply2. Black: negative pole of power supply3. Yellow: power output4. Brown: lamp positive5. White: lamp negative6. Blue: indicator light signal7. Green: Signal receivingPacking list:LCD monitor x 1Controller x 1Specification: Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 10cm * 7cm * 5cm / 3.94inch * 2.76inch * 1.97inch Qty per Carton 84 Carton Weight 30.00kgs / 66.14lb Carton Size 43cm * 30cm * 21cm / 16.93inch * 11.81inch * 8.27inch Loading Container 20GP: 984 cartons * 84 pcs = 82656 pcs40HQ: 2285 cartons * 84 pcs = 191940 pcs

Leer Más Menos

1) Original RII brand professional wireless mini remote, air mouse, and laser pointer combo. 2) 2.4GHz wireless connection, up to 10m operation distance (USB interface 2.4GHz receiver included) 3) Real Plug and Play 4) Mini air mouse comes with the left and right click keys, smooth in operation 5) Designed with a scroll wheel for page up & page down & ENTER function 6) Built-in laser pointer, suitable for multimedia teaching, meeting, lecture, training, and other activities 7) Ergonomic design for comfortable operation 8) Stylish appearance and mini portable size 9) The USB 2.4GHz receiver can be stored in the battery compartment, easy to carry 10) Apply to home theater, car computer entertainment, Tablet PC, Android TV Box, XBOX 360, HD player, etc Specifications: 1) Operation frequency: 2.4GHz RF 2) Operation distance: up to 10 meters 3) Operation voltage: 3.3V 4) Operation current: <300Ma 5) Sleep current: <1mA 6) 17 keys, air mouse, left and right click keys 7) System requirement: Windows 2000/XP/Vista/CE/7/8 & Linux (Debian-3.1 Redhat-9.0 Ubuntu-8.10 Fedora-7.0 tested) & Android OS Devices (with standard USB interface) 8) Battery type: 2 x AAA Battery (not included) Package Contents: 1) 1 x RII R900 Professional Air Mouse Laser Pointer Presenter Remote Control 2) 1 x USB 2.4GHz Receiver 3) 1 x User ManualSpecification: Package Weight One Package Weight 0.13kgs / 0.29lb One Package Size 18cm * 9cm * 3.5cm / 7.09inch * 3.54inch * 1.38inch Qty per Carton 48 Carton Weight 5.80kgs / 12.79lb Carton Size 40cm * 28cm * 28cm / 15.75inch * 11.02inch * 11.02inch Loading Container 20GP: 850 cartons * 48 pcs = 40800 pcs40HQ: 1974 cartons * 48 pcs = 94752 pcs

Leer Más Menos

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED 3G signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.65kgs / 3.64lb One Package Size 31cm * 23cm * 11cm / 12.2inch * 9.06inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 48cm * 33cm * 24cm / 18.9inch * 12.99inch * 9.45inch Loading Container 20GP: 701 cartons * 4 pcs = 2804 pcs40HQ: 1628 cartons * 4 pcs = 6512 pcs

Leer Más Menos

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 15-19dBm, Downlink 15-19dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 186 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.36kgs / 5.21lb One Package Size 52cm * 26cm * 15cm / 20.47inch * 10.24inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 54cm * 28cm * 32cm / 21.26inch * 11.02inch * 12.6inch Loading Container 20GP: 551 cartons * 2 pcs = 1102 pcs40HQ: 1279 cartons * 2 pcs = 2558 pcs

Leer Más Menos

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED 3G signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/ 60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.79kgs / 6.15lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Leer Más Menos

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz, GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain 65dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Automatic Gain Control >20dB Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <2 MTBF >50000h Power Supply AC:90~265V, 50/60Hz; DC:12V 2A Power Consumption <20W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 3.78kgs / 8.34lb One Package Size 39cm * 22cm * 20cm / 15.35inch * 8.66inch * 7.87inch Qty per Carton 4 Carton Weight 15.90kgs / 35.05lb Carton Size 51cm * 45cm * 45cm / 20.08inch * 17.72inch * 17.72inch Loading Container 20GP: 258 cartons * 4 pcs = 1032 pcs40HQ: 599 cartons * 4 pcs = 2396 pcs

Leer Más Menos

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.78kgs / 6.13lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Leer Más Menos