Resultados de la búsqueda de "motorcycle electronics"

1. The frequency meter capable of measuring the parameters of the frequency of the continuous carrier signal walkie-talkies, with signal strength indicator. 2. This portable frequency counter is designed for counting continuous wave signal comes from two-way radio. 3. There are easy ranges for you to choose. The ranges cover most of the frequency of the two way radios you want to measure. 4. 4 buttons for all function control, its four-button control is easy to use and its small size allows you to carry it anywhere you like. 5. Work by TCXO (crystal) Osc.2~2.5ppm. 6. Use for VHF/UHF walkie-talkies. 7. Auto power off 1-9 minutes. 8. Frequency response time: 0.2-0.5s (CTCSS/CDCSS>0.5-1s). 9. 240*320 pixel color LCD. 10. Digital select digi0.000 or 0.0000. 11. Frequency range: 27MHz-3000MHz (Note: 27-100MHz, it can not be guaranteed and the corresponding normal emission appliance)Specification: General Model SF401 Plus Material PC ABS Voltage 3.7V Battery Types Lithium-ion Battery Size 10.3*7*2.8cm Weight 102g Package Include Package Contents 1 x Detachable Antenna 1 x User Manual 1 x USB Cable 1 x Frequency Counter 1 x Power Adapter Package Weight One Package Weight 0.27kgs / 0.59lb One Package Size 19cm * 13cm * 5cm / 7.48inch * 5.12inch * 1.97inch Qty per Carton 20 Carton Weight 5.80kgs / 12.79lb Carton Size 40cm * 28cm * 27cm / 15.75inch * 11.02inch * 10.63inch Loading Container 20GP: 881 cartons * 20 pcs = 17620 pcs40HQ: 2047 cartons * 20 pcs = 40940 pcs

Leer Más Menos

1. Size: 16.2*9.6*3.6cm 2. Weight: 200g 3. DC input voltage: 12V/2.0A 4. USB is only used as 5V mobile output, the output current is 1000mA, and the output of USB connected to power supply is invalid. 5. USB 5V output is only valid for 3.7V lithium battery, and Ni-MH boost is not valid. 6. Charging current of lithium battery: 4.2V 300mA/500mA/700mA/1000mA 7. Charging current of Ni-MH battery: 1.48V 300mA/500mA/700mA/1000mA 8. Charger has 6 keys, mode selection key (MODE), current selection key (CURREN), independent selection and view data key (1234), which is simple and convenient to use. 9. In any case, hold down the MODE key and hold for 3 seconds to change the CHARGE (charging) mode or FAST TEST, NOR TEST (capacity detection) mode, and then press the corresponding function button again in 8 seconds to change. It can enter the working state eight seconds after the current, independent, mixed charging, capacity detection and selected function. In the working state, it can press the (1234) key lightly to view the current (mA)./ Capacity (mAh) / Voltage (V) / Time (h) / Internal Resistance (mR) Data Reference Value. 10. Specifications of rechargeable batteries: 18650, 26650, 14500, AA, AAA, etc. Warning 1. The charger can only charge cylindrical lithium-ion batteries and nickel-hydrogen batteries, but not lithium iron phosphate batteries. 2. Before use, please refer to the instructions carefully and pay attention to the recommended charging current of the rechargeable battery. Do not charge more than the recommended current. 3. Do not use other power adapters. 4. Charger charging and discharging may be hot, pay attention not to scald; 5. When stopping using, please unplug the power supply and battery. 6. It can only be used indoors. 7. The test data of this product are for reference only. Refer to the professional instruments for the actual situation.Specification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 20cm * 15cm * 5cm / 7.87inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 10.90kgs / 24.03lb Carton Size 52cm * 37cm * 37cm / 20.47inch * 14.57inch * 14.57inch Loading Container 20GP: 374 cartons * 40 pcs = 14960 pcs40HQ: 869 cartons * 40 pcs = 34760 pcs

Leer Más Menos

1. Super strong buffer shock absorption cycling mobile phone holder, no shaking when riding, no fear of mountain off-road, easy to handle various road conditions2. Freely adjust the angle, and support multiple angles to install for a better riding experience3. Automatic alignment and locking when put down, one-click to remove the mobile phone, quick disassembly, and easy operation4. Support 14-45mm diameter handlebars, widely used in various models, such as bicycles, motorcycles, scooters, treadmills, baby carriages, etc.5. Material: PC, ABS, nylon fiber, silicone, aluminum alloy6. Suitable for 4.5-7 inch mobile phones, with a wide range of compatibilitySpecification: Package Weight One Package Weight 0.24kgs / 0.53lb One Package Size 14cm * 10cm * 12cm / 5.51inch * 3.94inch * 4.72inch Qty per Carton 50 Carton Weight 12.50kgs / 27.56lb Carton Size 51cm * 43cm * 27cm / 20.08inch * 16.93inch * 10.63inch Loading Container 20GP: 450 cartons * 50 pcs = 22500 pcs40HQ: 1045 cartons * 50 pcs = 52250 pcs

Leer Más Menos

color: Orange, material: Steel, Aluminium, size: 15cm * 11.5cm * 4cm1. Easy wheel maintenance: This motorcycle stand is designed for easy wheel cleaning and chain lubrication, accommodating tyre widths under 180 mm2. Stable and strong: Combines a steel frame with anti-skid pads and three aluminium rollers, supporting up to 220 kg, the motorbike stand is suitable for most motorbikes3. Practical design: Simply place the front or rear wheel on the motorcycle wheel roller and rotate to clean efficiently without additional lifting tools4. Ramp inclusion: Featuring rollers with a ramp design, our motorcycle wheel roller stand enables easy bike loading and wheel positioning for hassle-free use5. Compact and portable: A 15 x 11.5 x 4 cm small wheel cleaning stand is incredibly easy for storage and transport. Put it in your motorcycle boot for use any timeRev up your motorcycle wheel and chain maintenance with the motorcycle wheel roller stand! Tailored for tyres up to 180 mm, this nifty stand boasts a robust steel frame and aluminium rollers to handle up to 220 kg. Simply roll your motorbike onto the ramped rollers for easy wheel cleaning and chain lubrication. A compact size makes it a breeze to store and carry.Specification: Package Weight One Package Size 15cm * 11.5cm * 4cm / 5.91inch * 4.53inch * 1.57inch Qty per Carton 1 Carton Weight 1.00kgs / 2.20lb Carton Size 19cm * 15cm * 6cm / 7.48inch * 5.91inch * 2.36inch Loading Container 20GP: 15594 cartons * 1 pcs = 15594 pcs40HQ: 36201 cartons * 1 pcs = 36201 pcs

Leer Más Menos

Parámetros básicos: 1. Voltaje de funcionamiento: 12 V CC. 2. Frecuencia de trabajo: 315 MHZ/433 MHZ 3. Capacidad de contacto: menor o igual a 10 A/250 V CA, 10 A/30 V CC 4. Sensibilidad de recepción: mayor a -105dB 5. ¿Tiene carcasa?: Sí 6. Distancia del control remoto: 10-30 metros (sin interferencias en espacios abiertos), esta distancia es la distancia teórica sin interferencias en espacios abiertos. 7. En uso, se reducirá según las diferentes interferencias ambientales y las paredes divisorias. 8. Número de canales de control: 1 canal contacto normalmente abierto/normalmente cerrado Características: 1. Valor de conmutación del relé de salida: Puede controlar cargas con diferentes voltajes por debajo de 250 V y la fuente de alimentación debe ser de 12 V. 2. Tamaño pequeño: tamaño pequeño, peso ligero, el tamaño de la placa de circuito es de solo 35 x 32 x 19 mm. 3. El usuario puede ajustar el modo de trabajo a voluntad: los modos de trabajo de autobloqueo, enclavamiento y avance lento se pueden ajustar a través del cortocircuito del pin. 4. Aprendizaje de emparejamiento de código: puede aprender a emparejarse con el mismo control remoto de frecuencia a voluntad (no se preocupe si pierde el control remoto durante el uso, simplemente compre el control remoto y apréndalo, y no necesita reemplazar todo el conjunto, lo que ahorra en gran medida el costo del usuario). Especificación: Peso del paquete Peso de un paquete 0,06 kg/0,13 lb Un tamaño de paquete 8 cm x 6 cm x 3 cm (3,15 pulgadas x 2,36 pulgadas x 1,18 pulgadas) Cantidad por caja 200 Peso de la caja 10,00 kg/22,05 lb Tamaño de la caja 36 cm x 28 cm x 22 cm (14,17 pulgadas x 11,02 pulgadas x 8,66 pulgadas) Contenedor de carga 20GP: 1202 cajas * 200 piezas = 240400 piezas 40HQ: 2791 cajas * 200 piezas = 558200 piezas

Leer Más Menos

1. 1024x600 high resolution 2. Compatible with Raspberry Pi 2B/3B/Zero/Zero W 3. The TFT LCD is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz 4. Supports Raspbian, Ubuntu, OSMC, etc. 5. Backlight can be turned off to lower power consumption 6. Compact size, suit for various projects 7. Note: This item can be used for displaying ONLYSpecification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 20cm * 12cm * 10cm / 7.87inch * 4.72inch * 3.94inch Qty per Carton 12 Carton Weight 4.60kgs / 10.14lb Carton Size 36cm * 32cm * 32cm / 14.17inch * 12.6inch * 12.6inch Loading Container 20GP: 723 cartons * 12 pcs = 8676 pcs40HQ: 1679 cartons * 12 pcs = 20148 pcs

Leer Más Menos

Features:1. 2.0-inch smart screen, and added the test attributes of the smart multimeter. At the same time, it optimizes the use of functions and the testing experience. And added a "strong sensitivity detection mode" design.2. The clear EBTN display is clear and easy to read.3. Non-contact and pen-shaped design, easy to operate and carry.4. Dual mode operation (low sensitivity and high sensitivity)5. It has dangerous voltage induction alarm, DC/AC voltage, resistance, frequency, line/zero line difference, line breakpoint position, continuity check, flashlight characteristics, etc.6. It has 8 LED indicators in 3 colors (red/yellow): automatic identification of high/medium/low voltage.7. Alarm mode: sound, analog bar and indicator light (red/yellow).8. LED spotlight, low battery prompt, automatic shutdown function.Parameter:1. Voltage: 600V DC or 600V AC2. Frequency: 40 Hz-1000 Hz3. Impedance: 10Mohms4. AC voltage test: 12V-1000V5. Weight: 69 grams (without batteries)6. Dimensions: 160x28x32 mm7. Power supply: 2 AAA batteries (not included)Specification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 18cm * 9cm * 5cm / 7.09inch * 3.54inch * 1.97inch Qty per Carton 50 Carton Weight 12.00kgs / 26.46lb Carton Size 47cm * 36cm * 27cm / 18.5inch * 14.17inch * 10.63inch Loading Container 20GP: 583 cartons * 50 pcs = 29150 pcs40HQ: 1355 cartons * 50 pcs = 67750 pcs

Leer Más Menos

Overview1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1268 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12682. Frequency band: 410.125 ~ 493.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 110mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1268 433MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 433MHz antenna x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Leer Más Menos

1. Fully DVB-S/S2/S2X compliant, Live FTA digital picture and sound. 2. Support AHD CCTV Max 8MP 3. Support H.264/H.265(10 Bit) hardware decoding.4. Digital measuring device for signal strength and quality, supports presetting all satellite information.5. Support AV in and AV/HDMI out function.6. 4.3 inch LCD Colour Screen.7. 4000mAh Lithium-ion battery, normal work up to 4-6 hours. 8. Support 13V/18V/LOCK status panel LED display directly. 9. Support battery power display.10. Software upgradeable via USB and Wifi network (Wifi for MT7601 chip). 11. Supports scan of Auto, Blind, Manual or NIT, Sound for Locking Signal. 12. Supports DISEQC 1.0/1.1/1.2, unicable, 0/22kHz tone, auto calculate angle of AZ, EL.13. Support compass function, speaker integrated. 14. Support real-time power display, with low power reminder. 15. LNB short protect.Main Features:1. System capabilities: Full HD DVB-S/S2/S2X & H.265 Complian, Fully DVB compliant2. Video Decode: AC-3, MPEG-2 MPEG-4 MP HL, H.264 BP MP&HP L4.1, AVS profile L6.1/4.0/2.03. PAL/NTSC: Automatic PAL/NTSC conversion4. Channels Number: 6000 channels TV and Radio programmable5. Favorites: 8 different favorite groups selection6. OSD Language: English, German, French, Portuguese, Spanish, Italian, Russian, Turkish, Polish, Arabic, Farsi, Espanol, Deutsch7. OSD Color: 16-bit OSD with anti-flickering8. Channel Search: Channel search in automatic, manual and network search 9. Channel Edit: Various channel editing function(favorite, move, lock, skip, delete, rename, find, sort) 10. Easy Menu: Plug and Play installation, with an easy to use Menu System11. SoftUpgrade: Software upgrade through USB12. Save Channel: Automatic save for last channel13. Li-on Battery: 4000mAh14. Power Supply: DC12V/1500mA (Input 100V-240V, 50/60Hz)15. Panel display: 4.3 inch LCD Colour Screen16. Output Interface: HDMI(up to 1080P) output, LNB-IN x 2, DV-OUT, AV-OUT, AV-IN, USB, Power supplyElectric Performance1. System resource: Flash Memory: 64MB Serial FlashDDR3 Memory: 1GB DDR32. LNB/Tuner input:Connector: F-type maleFrequency range: 950MHz-2150MHzInput Impedance: 75ΩSignal lever: -65dBm to -25dBmActive Ant Power: 13/18V DC 400mA MAX, Overload ProtectionLNB switch control: 22KHzDiSEqC: Ver 1.0/1.1/1.23. Demodulator:Front end: QPSK(S), QPSK, 8PSK, 16APSK, 32APSK(S2)Modulation range: 2Mbps-45MbpsSCPC and MCPC Capable: YesSpectral inversion: Auto conversionPacking listDigital satellite meter x 1User manual x 1AV cable x 1Car charger cable x 1Adaptor x 1Specification: Package Weight One Package Weight 1.00kgs / 2.20lb One Package Size 23cm * 16cm * 6.5cm / 9.06inch * 6.3inch * 2.56inch Qty per Carton 20 Carton Weight 20.00kgs / 44.09lb Carton Size 48cm * 34cm * 35cm / 18.9inch * 13.39inch * 13.78inch Loading Container 20GP: 466 cartons * 20 pcs = 9320 pcs40HQ: 1083 cartons * 20 pcs = 21660 pcs

Leer Más Menos

1. Processor: LX7 dual-core processor 2. Network: 2.4GHz Wi-Fi3. Bluetooth: BLE 5 4. Screen size: 7 inches 5. Resolution: 800 x 480 6. Other Features: On-board antenna, 5-point touch, 65K colors, audio playback, audio capture, PCF85063 RTC clock, BQ27220 battery monitor7. Interfaces: Type-C, Micro SD card slot, 3.5mm8. Power Supply: Supports wide voltage range of DC 7–36V9. Dimensions: Approx. 19.5 x 11.3 x 2.3 cmFeatures:1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz 2. Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE, with an onboard antenna 3. Built-in 512 KB SRAM and 384 KB ROM, with 32 MB Flash and 16 MB PSRAM stacked on the same die 4. On-board 7-inch LCD capacitive touchscreen, 800 x 480 resolution, 65K colors5. Supports I2C interface for capacitive touch control, 5-point touch, and interrupt support 6. On-board ES8389 audio codec chip and ES7210 echo cancellation circuit 7. On-board voltage regulator chip, supporting a wide supply voltage range of 7–36 V 8. On-board RTC chip and battery holder; time is retained during power outages when a battery is installed9. On-board BQ27220 battery fuel gauge for real-time monitoring of battery capacity10. On-board I2C interface, Micro SD card slot, and PH2.0 battery connector11. External LED indicators for easy monitoring of power and battery charging status, including a custom STA status light 12. Supports flexible clock settings and precise control, such as separate module power supply configuration, to enable low-power modes for multiple scenariosSpecification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 23cm * 15cm * 6cm / 9.06inch * 5.91inch * 2.36inch Qty per Carton 20 Carton Weight 9.00kgs / 19.84lb Carton Size 48cm * 32cm * 30cm / 18.9inch * 12.6inch * 11.81inch Loading Container 20GP: 578 cartons * 20 pcs = 11560 pcs40HQ: 1343 cartons * 20 pcs = 26860 pcs

Leer Más Menos

Stay powerful, anywhere in the world. The Mophie Charge Stream Travel Kit is a complete wireless charging solution built for life on the move. Inside one neat travel pouch, you'll find Mophie's compact Charge Stream Pad Mini, a 2.4A wall adapter with interchangeable plugs for the UK, US, Europe, China and Australia, a 2.4A car charger, a 1.5m USB-A to Micro-USB cable, and a soft carrying pouch to keep it all organised. Wireless charging at home, in the car, in the hotel room, on every continent. At the heart of the kit is the Charge Stream Pad Mini — Mophie's smallest Qi-certified wireless charging pad. Just under 6cm square and barely 2cm thick, it weighs almost nothing and slips into any bag, pocket or hotel drawer. Drop your Qi-enabled phone onto the rubberised top and a steady, efficient 5W charge begins on contact. No cables to plug in. No fiddling with connectors. No different ports for different phones. Just place and charge. The clever interchangeable wall adapter is what makes this kit a proper travel essential. Snap on the UK plug for home, swap to the US or EU plug for your next trip, or use the car adapter for road journeys — all powered from the same single unit. The 2.4A output charges quickly, the included Micro-USB cable handles connection to the pad, and the soft pouch keeps the whole kit packed tidily for your next flight. Compatible with every Qi-enabled smartphone — iPhone, Samsung Galaxy, Google Pixel and beyond — and capable of charging through phone cases up to 3mm thick, this is wireless charging the way it should be: simple, portable, and ready for anywhere your travels take you. Built by Mophie, trusted by professionals. Key Highlights Complete wireless travel kit — pad, wall adapter, car charger, cable and pouch Universal Qi wireless charging — works with iPhone, Samsung, Google and any Qi-enabled phone 5W charging output — steady, reliable charge from the moment you place your phone Interchangeable international plug heads — UK, US, Europe, China and Australia included 2.4A USB wall adapter — fast, efficient power delivery 2.4A USB car charger — keep charging on every road trip 1.5m USB-A to Micro-USB cable included Charges through phone cases up to 3mm thick Rubberised non-slip top and bottom — phone stays put, pad stays put LED charging indicator — confirms power is flowing Compact Charge Stream Pad Mini — fits in any pocket, drawer or bag Soft carrying pouch keeps the whole kit organised for travel Trusted Mophie quality — premium build, properly engineered Why Travellers Love This Kit A genuine charging upgrade for anyone on the move: One kit covers every plug socket worldwide — no more last-minute adapter shopping Wireless charging means no fiddling with different cables for different phones Compact pad slips onto any hotel bedside table or office desk Car charger keeps you topped up between meetings or on long drives Soft pouch keeps everything tidy in your carry-on or laptop bag Works through your case — no need to remove your phone every time Perfect For A premium wireless travel essential for every kind of user: Business travellers and frequent flyers Holidaymakers visiting multiple countries Commuters charging on the go in car or office Hotel stays, Airbnbs and short-term rentals Digital nomads working from anywhere Couples or families sharing one kit on holiday Anyone with a Qi-enabled iPhone, Samsung or Android device Gifts for travellers, professionals or new phone owners Office desks, hot-desk setups and home workstations Product Specifications Detail Brand Mophie Product Charge Stream Universal Wireless Travel Kit Wireless Charging Qi-certified, up to 5W output Wall Adapter Output 2.4A USB Car Charger Output 2.4A USB Included Cable USB-A to Micro-USB, 1.5m length International Plugs UK, US, Europe, China, Australia Case Compatibility Charges through cases up to 3mm thick Compatibility All Qi-enabled smartphones (iPhone, Samsung, Google Pixel, more) Charging Indicator LED status light Packaging Soft travel pouch included Condition Brand new, in original packaging Easy to Use, Built for Travel Designed for stress-free everyday charging: Plug the wall or car adapter into your power source Snap on the plug head for your country Connect the Micro-USB cable to the Charge Stream Pad Mini Place your Qi-enabled phone on the pad — charging starts instantly LED light confirms the charge is active Pack everything back into the pouch when you're done What's in the Box 1 × Mophie Charge Stream Pad Mini (wireless charging pad) 1 × 2.4A USB wall adapter 4 × International plug heads (UK / US / Europe / China / Australia) 1 × 2.4A USB car charger 1 × USB-A to Micro-USB cable (1.5m) 1 × Soft travel pouch 1 × User manual Original Mophie retail packaging Phone not included. Stay powerful, anywhere. Add the Mophie Charge Stream Universal Wireless Travel Kit to your bag today — premium build, Qi wireless charging, and ready for every plug socket in the world.

Leer Más Menos

1. SOC (System on Chip): BCM2711B02. CPU: ARM Cortex-A72 Quad-core 1.5GHz3. GPU: Broadcom VideoCore IV @ 500MHz4. RAM: 3GB5. USB: 2 x USB 2.0 + 2 x USB 3.06. HDMI: Mini HDMI (supports 4Kp60)7. Bluetooth: Bluetooth 5.08. WiFi: 802.11ac 2.4GHz/5GHz dual-band wireless card9. Ethernet Port: 1000Mbps10. Ethernet PoE: Supported11. Power Supply Interface: USB Type-C (5V 3A)12. MicroSD Slot13. 3.5mm Audio Jack14. 40PIN GPIO Header15. CSI Camera Interface16. DSI Display InterfaceSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 12cm * 8cm * 4cm / 4.72inch * 3.15inch * 1.57inch Qty per Carton 200 Carton Weight 14.10kgs / 31.08lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs40HQ: 1439 cartons * 200 pcs = 287800 pcs

Leer Más Menos