Resultados de la búsqueda de "control module"
-
TTGO TTGO Meshtastic T-Beam V1.1 ESP32 923MHz OLED WiFi Bluetooth GPS NEO-6M SMA 18650 Battery Holder, 923MHZ OLED
Product demonstration (Note: OLED is not soldered to T-beam) Features: 1. ESP 32 version: Rev1 2. WiFi 3. Bluetooth 4. 4MB pSRAM 5. 4MB flash memory 6. Three-dimensional antenna product description: 1. Working voltage: 1.8~3.7V 2. Acceptable current: 10~14 mA 3. Transmitting current: 120 mA@+20 dBm 4. 90 mA@+17 dBm 5. 29 mA@+13 dBm 6. Working frequency: 433/470 MHz (433 HMz version) SX1278 /868m/915 m (868 MHz version) SX1276 7. Transmitting power: +20 dBm 8. Receiving sensitivity: -139 dBm@Lora&62.5Khz&SF=12&146 bps -136 dBm@Lora&125 Khz&SF=12&293 bps -118 dBm@Lora&125 Khz&SF=6&9380 bps -123 dBm@FSK&5 Khz&1.2Kbps 9. Frequency error: +/-15 kHz 10. FIFO space: 64 bytes 11. Data rate: 1.2k~300 Kbps@FSK 0.018K~37.5Kbps@Lora 12. Modulation method: FSK, GFSK, MSK, GMSK, Lora TM, OOK 13. Interface form: SPI 14. Sleep current: 0.2uA 15. 1.5uA@Idle 16. Working temperature: -40 degrees Celsius-+85 degrees Celsius 17. Digital RSSI function 18. Automatic frequency correction 19. Automatic gain control 20. Low pressure detection 21. Fast wake-up and frequency hopping 22. Highly configurable packet handler Global Positioning System: 1. GPS module neo-6m, 3V-5V power supply universal 2. The predetermined module with ceramic antenna, super signal 3. Save configuration parameter data EEPROM 4. With data backup battery 5. With LED signal indicator 6. The default baud rate: 9600 power: 1. TP 5400 2. 1A battery management 3. LED indicator: there are 4 LEDs to display the battery status in real time 4. USB 5. CP 2104-GMR 6. Pre-Flash firmware OLED description: 1. Size: 0.96 inches 2. High resolution: 128x64 3. Color: white 4. Viewing angle: >160 degrees 5.Driver IC: SSD 1306 6. Working temperature: -30~80 degrees Celsius 7. Module size (generous): 27.0mm x 27.0mm x 4.1mm 8. Support a variety of control chips: fully compatible with Arduino, 51 series, MSP 430 series, STM 32/2, CSR chips, etc. (a lot of examples are available for reference) 9. Wide voltage support: directly support 3.3V~5V DC power supply without any modification 10. Ultra-low power consumption: 0.04W in normal operation 11. IO port occupies the smallest display: IIC communication, as long as two IO ports Specification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch Qty per Carton 100 Carton Weight 7.50kgs / 16.53lb Carton Size 57cm * 32cm * 24cm / 22.44inch * 12.6inch * 9.45inch Loading Container 20GP: 609 cartons * 100 pcs = 60900 pcs40HQ: 1414 cartons * 100 pcs = 141400 pcs
£44.99
-
HW-318 12V To 5V Buck Module DC-DC 3A DC Power Module LED Battery Car Voltmeter
1. Two-wire car voltmeter + 5.0V USB charging combo2. High-performance, multi-purpose, intelligent and user-friendly design3. If you don’t need to enable the switch, just disconnect the pointed line4. Ultra-wide range of voltmeter: DC4. 5~40V5. The output current capacity of 5.0V, 2A is enough to meet various USB devices, and the voltage is very stable. This module is short-circuited by D+D- by default, which is compatible with most mobile phone charging, and reserves the installation position of various mobile phone identification resistors. , If you need to add identification resistance, please cut off the wire connecting D+ D-6. Purpose: Ultra-wide input voltage, can be used for cars, battery cars, motorcycles, used to monitor the battery voltage, timely grasp the battery status, can be used for various voltage measurement purposes7. Note: The power module will become hot during normal use. If you are mindful of this heat or are sensitive to heat, please take it carefully.8. Weight: 13g9. Size: 58x21x10mmModule performance and highlights:1. The output current capacity of 5V/2A (note: when the input voltage is 6.5~40V, the output voltage of 5.0V can be stabilized)2. With reverse connection protection, reverse connection will not burn3. With over-current and over-temperature protection4. With USB power indicator5. With wiring terminals, easy to access the line6. High efficiency, low rippleModule instructions:After the module is powered on, the voltage can be detected in real time. When you need to charge mobile phones, Ipads, MP3s and other digital products, just touch the "output enable" button. At this time, the USB power indicator lights up and the USB outputs 5.0V voltage; When you need to turn off the digital tube, touch the "low power consumption" button, and the module enters the ultra-low power standby mode, and the USB output is also turned off accordingly.Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 5cm * 3cm / 3.15inch * 1.97inch * 1.18inch Qty per Carton 300 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 300 pcs = 186000 pcs40HQ: 1439 cartons * 300 pcs = 431700 pcs
£4.99 £1.99
-
WAVESHARE Administrador de energía solar de Waveshare (C)
Precauciones de seguridad 1. Las baterías de iones de litio y de polímero de litio son bastante inestables. Pueden provocar incendios, lesiones personales o daños materiales si no se recargan o utilizan correctamente. 2. No invierta la polaridad al recargar o descargar la batería. No utilice un cargador o panel de carga de calidad inferior para recargar la batería. 3. No mezcle baterías viejas con nuevas, evite utilizar baterías de diferentes marcas. 4. Al comprar una batería de litio, asegúrese de que las especificaciones de la batería sean compatibles con la placa de expansión. Elija baterías de un fabricante oficial y asegúrese de que funcionen de manera estable y segura mediante una prueba de envejecimiento. 5. Las baterías de litio tienen una vida útil limitada y se deterioran con el paso del tiempo. Deben reemplazarse por otras nuevas cuando alcancen su vida útil máxima o cuando funcionen durante más de dos años, lo que ocurra primero. 6. Debe colocarse con cuidado y de forma adecuada, manteniéndolo alejado de artículos inflamables y explosivos, fuera del alcance de los niños, evitando cualquier accidente de seguridad causado por un almacenamiento descuidado. Características El Solar Power Manager (C) es compatible con paneles solares generales de 6 V ~ 24 V. Puede recargar baterías de iones de litio recargables 18650 a través de un panel solar o una conexión USB TIPO C, y proporciona una salida regulada de 5 V/3 A (compatible con múltiples protocolos, incluidos PD/QC/FCP/PE/SFCP). El módulo cuenta con función MPPT (seguimiento del punto de máxima potencia) y circuitos de protección múltiple, por lo que puede seguir funcionando con alta eficiencia, estabilidad y seguridad. Es adecuado para proyectos de protección ambiental, IoT de bajo consumo y energía solar. 1. Admite la función MPPT (seguimiento del punto de máxima potencia), maximiza la eficiencia del panel solar. 2. Recarga flexible de batería: desde panel solar o adaptador de corriente USB TIPO C 3. Compatible con paneles solares de 6 V ~ 24 V, entrada de conector DC-002 o entrada de terminal de tornillo 4. Interruptor MPPT SET integrado, selecciona el nivel cerrado al nivel de entrada para mejorar la eficiencia de recarga 5. Condensador electrolítico de aluminio integrado y condensador cerámico SMD, que reduce la ondulación y ofrece un rendimiento estable. 6. Soporte de batería integrado, compatible con 3 baterías recargables de iones de litio 18650 7. Varios indicadores LED, para monitorear el estado del panel solar y la batería. 8. Circuitos de protección múltiple: sobrecarga / sobredescarga / a prueba de reversa / sobrecalentamiento / sobrecorriente, estable y seguro de usar. Presupuesto 1. Entrada solar: 6 V ~ 24 V (18 V por defecto) 2. Recarga: Panel solar, adaptador de corriente, USB 3. Batería: 3 baterías de iones de litio 18650 (no incluidas) 4. Entrada USB: 5 V (tipo C, con soporte de carga rápida PD) 5. Salida de 5 V: 5 V/3 A (salida USB, tipo C) 6. Tensión de corte de recarga: 4,2 V +/- 1 % 7. Voltaje de protección contra sobredescarga: 3,0 V +/- 1 % 8. Eficiencia de recarga del panel solar: ~78% 9. Eficiencia de recarga USB: ~93% 10. Las baterías aumentan la eficiencia: ~92% 11. Caja: Caja de metal 12. Tamaño: 119,0 x 71,0 x 25,2 mm 13. Lista de paquetes: - Gestor de energía solar (C) x1 - Adaptador x1 Especificación: Peso del paquete Peso de un paquete 0,24 kg/0,54 lb Un tamaño de paquete 20 cm x 15 cm x 5 cm (7,87 pulgadas x 5,91 pulgadas x 1,97 pulgadas) Cantidad por caja 40 Peso de la caja 9,00 kg/19,84 lb Tamaño de la caja 42 cm x 32 cm x 27 cm (16,54 pulgadas x 12,6 pulgadas x 10,63 pulgadas) Contenedor de carga 20GP: 734 cajas * 40 uds. = 29360 uds. 40HQ: 1705 cajas * 40 piezas = 68200 piezas
£20.99
-
1000-2E Two-button Water Pump Motor Smart Socket Access Control Lamp Learning Wireless Remote Control, 315M 1527, 433M 1527, 315M 4.7, 433M 4.7
1. Using SAW devices to stabilize the frequency, 6.5G ultra-high frequency triode, to meet all aspects and levels of application2. Scope of application: car, motorcycle anti-theft device, family anti-theft alarm, various remote control, electric curtain, rolling door, parking lot barrier control, etc.3. Working voltage: 12V4. Working current: 10mA5. Transmission distance: 200 meters6. Modulation method: ASK7. Size: 92x41x12mm8. Battery specification: 23A 12V battery (not included)Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 11cm * 6cm * 3cm / 4.33inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 9.50kgs / 20.94lb Carton Size 44cm * 30cm * 30cm / 17.32inch * 11.81inch * 11.81inch Loading Container 20GP: 673 cartons * 200 pcs = 134600 pcs40HQ: 1563 cartons * 200 pcs = 312600 pcs
£4.99 £1.99
-
For BMW F52 125i 120i 118i 2015-2018 Car Left LED Turn Signal Light Ballast Control Module 63117466511, 63117466511
1. Easy to install, plug and play.2. Replaces original vehicle parts and does not require programming.3. Voltage: 12V4. OE: 631174665115. Suitable for BMW F52 125i 120i 118i 2015-2018Specification: General Compatible with BMW: 118i Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 12.5cm * 8cm * 7.5cm / 4.92inch * 3.15inch * 2.95inch Qty per Carton 50 Carton Weight 9.00kgs / 19.84lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 50 pcs = 25700 pcs40HQ: 1194 cartons * 50 pcs = 59700 pcs
£18.99
-
BETAFPV LiteRadio 4 Neo FPV Drone Controller with Bluetooth Flight Simulator Support, Left-hand Throttle Gray, Right-hand Throttle Gray, Left-hand Throttle White
[10-CHANNEL OUTPUT AND ADJUSTABLE ELRS 2.4G] Built-in ExpressLRS 2.4G RF module with 10-channel output supports 25mW, 50mW, and 100mW switchable transmission power, providing reliable long-range control for FPV racing drones, fixed-wing aircraft, soccer drones, and robotics. [MULTI-PLATFORM SIMULATOR SUPPORT] Features Joystick and Xbox connection modes via Type-C, seamlessly working with popular FPV simulators (Liftoff, DRL, for DJI Virtual Flight) across PC, tablets, and smartphones for convenient flight practice anywhere. [UPGRADED GIMBALS AND REAL-TIME TRIM] Equipped with coated gimbal sensors for higher precision and extended lifespan, plus dedicated physical trim buttons that let you fine-tune stick center offset dynamically mid-flight. [15W FAST CHARGING AND LONG BATTERY LIFE] Supports 5V/3A (15W) fast charging via Type-C to reach a full charge in about 30 minutes. The built-in 1S LiPo batterydelivers over 8 hours of flight time at 25mW and about 6 hours at 100mW. [ERGONOMIC LIGHTWEIGHT DESIGN] Weighing approximately 210g with a compact 172.5 x 118.5 x 72.5 mm gamepad-style grip, this controller offers fatigue-free handling and includes custom stick protectors for safe transport. Channels: 10 Channels RF System: ELRS 2.4G RF Output Power: 25mW / 50mW / 100mW Adjustable Simulator Modes: Joystick and for Xbox Modes (PC, for Mac, Tablet, Phone) Interface and Charging: USB Type-C (Data and 5V/3A 15W Fast Charging) Battery and Runtime: Built-in 1S 1000mAh LiPo (Neo) ; 8+ Hours at 25mW, Approx. 6 Hours at 100mW Dimensions and Weight: 172.5 x 118.5 x 72.5 mm, Approx. 210g Package Includes: 1 x Radio Transmitter, 1 x Stick Protector Set, 1 x Type-C Data Cable, 1 x User ManualSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 20cm * 15cm * 18cm / 7.87inch * 5.91inch * 7.09inch Qty per Carton 8 Carton Weight 5.10kgs / 11.24lb Carton Size 42cm * 32cm * 38cm / 16.54inch * 12.6inch * 14.96inch Loading Container 20GP: 522 cartons * 8 pcs = 4176 pcs40HQ: 1212 cartons * 8 pcs = 9696 pcs
£39.99
-
TTGO TTGO LORA32 V2.1 ESP32 0.96 inch OLED Bluetooth WiFi Wireless Module 915MHz SMA IP5306 Module with Antenna, 915MHz
1. Working voltage: 1.8~13.7V 2. Acceptable current: 10~114mA 3. Emission current: - 120mA at + 20dBm - 90 mA lies at +17dBm - 29mA at +13dBm 4. Working frequency: 915MHz 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm lies at LoRa & 62.5Khz & SF = 12 & 146bps - 136dBm lies at LoRa & 125Khz & SF = 12 & 293bps - 118dBm lies at LoRa & 125Khz & SF = 6 & 9380bps - 123dBm lies at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: -1.2K~1300Kbps at FSK -0.018K~37.5Kbps at LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA SLEEP - 1.5uA IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. RF wake-up function 18. Low voltage detection and temperature sensor 19. Fast wake-up and frequency hopping 20. Highly configurable packet handler 21. SMA antenna IP5306 This product is based on LoRa radio frequency, 868MHz (common in North America), 915MHz (common in Europe) and 433MHz (common in Asia Pacific)Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 7.00kgs / 15.43lb Carton Size 36cm * 26cm * 26cm / 14.17inch * 10.24inch * 10.24inch Loading Container 20GP: 1095 cartons * 100 pcs = 109500 pcs40HQ: 2543 cartons * 100 pcs = 254300 pcs
£21.99
-
WAVESHARE Waveshare Multi Band 2G GSM / GPRS LBS A7670E LTE Cat-1 HAT for Raspberry Pi, for Europe, Southeast Asia, West Asia, Africa, China, South Kor, A7670E LTE Cat-1 HAT
FeaturesThe A7670E Cat-1 HAT is an LTE Cat-1 module, which supports wireless communication modes including LTE-TDD, LTE-FDD, GSM, GPRS and EDGE, with up to 10Mbps downlink rate and 5Mbps uplink rate. It supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070 series, and the AT commands is mostly compatible with SIM7600 series. It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, and so on. 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards 2. Support protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL 3. Support dial-up, telephone call, SMS 4. Support LBS base station positioning, it is able to get the approximate position info via mobile network 5. TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words 6. Onboard USB interface, for testing AT Commands, network communication, and so on 7. Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc. 8. Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Arduino/STM32 9. SIM card slot, supports 1.8V/3V SIM card 10. 2x LED indicators, easy to monitor the operating status 11. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper 12. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)SpecificationFrequency band 1. LTE Cat-1: LTE-FDD: B1, B3, B5, B7, B8, B20 2. 2G: GSM/GPRS/EDGE: 900/1800 MHz SMS and audio 1. SMS: Supported types: MT, MO, CB, Text, PDU 2. Storage: USIM card (CB could not be stored on SIM card) 3. Audio feature: Standard 3.5mm audio jack for audio input/output Others 1. Power supply: 5V 2. Operating voltage:5V / 3.3V (configured via jumper) 3. Operating temperature: -30 degree C ~ 80degree C 4. Storage temperature: -45 degree C ~ 90 degree C 5. Dimensions: 65 x 30.5mmPackage List1. A7670E Cat-1 HAT x 1 2. LTE Antenna x 1 3. USB-A to USB-C cable x 1 4. RPi screws pack x 1Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£24.99
-
WAVESHARE WAVESHARE ESP32-P4-WIFI6 7-Inch Five-Point Touchscreen Development Board 1024x600 Resolution, Basic, Includes OV5647 Camera
Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 23.30kgs / 51.37lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs40HQ: 1197 cartons * 48 pcs = 57456 pcs
£50.99 - £59.99
-
Waveshare Waveshare Industrial 6-Ch Relay Module For Raspberry Pi Zero RS485/CAN, Isolated Protections, EU Plug, US Plug
1. Uses the SP3485 chip controlled via UART; supports automatic transmit/receive switching for RS485 half-duplex communication.2. Uses the MCP2515 + SN65HVD230 combination controlled via SPI; enables CAN half-duplex communication.3. Features onboard integrated power isolation, providing stable isolated voltage without the need for an external power supply on the isolated side.4. Includes onboard optocoupler isolation to prevent interference from external high-voltage relay circuits affecting the main control chip.5. Equipped with onboard TVS (Transient Voltage Suppressor) diodes to effectively suppress surge voltages and transient voltage spikes, offering lightning and ESD protection.6. Features onboard resettable fuses and protection diodes to ensure stable current and voltage output, protect against overcurrent and overvoltage, and enhance surge resistance.7. Uses high-quality relays; supports loads up to 10A 250V AC or 10A 30V DC.8. Housed in a DIN-rail mountable ABS protective case for convenient installation and safer operation.Specifications:1. Power supply voltage: 7V–36V2. Number of relay channels: 63. Communication protocols: RS485, CAN4. Contact type: One Normally Open (NO), One Normally Closed (NC)Specification: Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 17cm * 11cm * 5cm / 6.69inch * 4.33inch * 1.97inch Qty per Carton 9 Carton Weight 30.80kgs / 67.90lb Carton Size 32cm * 32cm * 47cm / 12.6inch * 12.6inch * 18.5inch Loading Container 20GP: 554 cartons * 9 pcs = 4986 pcs40HQ: 1286 cartons * 9 pcs = 11574 pcs
£37.99
-
Main Controller Board Module Part, For DJI Phantom 3 Standard, For DJI Phantom 3 Pro / Phantom 3 Advanced 2312, For DJI Phantom 3 Pro / Phantom 3 Advanced 2312A
1. Compatible models: for DJI Phantom 32. Replace damaged or unusable ones with new ones3. Easy-to-install replacement parts4. Every item has been inspected and in good condition before shipment.5. Repairing drones is complicated, please make sure you have professional repair skills, or go to a professional repair departmentSpecification: General Compatible with DJI: Phantom 3 Standard Package Weight One Package Weight 0.13kgs / 0.29lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 356 Carton Weight 44.86kgs / 98.89lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs40HQ: 412 cartons * 356 pcs = 146672 pcs
£57.99
-
Adjustable Constant Voltage Constant Current Liquid Crystal LCD Multi-Display, PCB
1. Input voltage: 6.5-36V (the input voltage is lower than 6.5V, the current accuracy is inaccurate, and the LCD display is abnormal if it is lower than 5.5V)2. Output voltage: 1.2-32V, the default output is 5V step-down type, the output voltage can only be lower than the input voltage, and the voltage difference is more than 2V3. Output current: It can work stably at 3.5A for a long time, and it can reach about 4.5A with fan enhanced heat dissipation (adjustable limit current can reach about 4.2-4.5A)4. Output power: natural heat dissipation 50W (within 3.5A), plus fan to enhance heat dissipation 75W5. Voltage display: resolution 0.05V, range 1.2-32V6. Current display: resolution 0.005A, range 0-4.5A7. Conversion efficiency: about 94%, depending on the voltage difference and current efficiency8. Working current: about 30mA9. Input reverse polarity protection: yes10. Anti-backflow at the output: no (if charging the battery, first power on the module and then connect the battery, and ensure that the battery voltage is lower than the output voltage; if possible, connect an anti-backflow diode in series with the output positive pole)11. Short circuit protection: yes12. Size: about 70.5x48.4x28mm13. Weight: about 65g Features:1. Crystal shell, beautiful design, good touch texture of buttons, and output voltage set by button2. The button can control the output to turn off and on, and can set the power-on default to ON or OFF3. LCD can display input and output voltage, output current and output power4. The input terminal is protected against reverse connection, and the reverse connection will not burn5. High efficiency, high current, low heat generation, constant current value can be adjusted around 0-4.5A, suitable for office power supply, high-power LED constant current drive, lithium battery charging, etc.Function Description:1. There are IN/OUT and ON/OFF buttons on the left side of the module: the IN/OUT button switches the display of input voltage and output voltage, long press to switch the display of output current and output power; the ON/OFF button controls the output ON or OFF, long press Press to set the default output state is ON or OFF at the next power-on2. There are +/- two buttons on the right side of the module: + button press the output voltage to increase 0.05V, long press to continuously increase, and then long press to continuously increase 0.1V, 1V in slow steps; - button press the output voltage Decrease 0.05V, long press to continuously decrease, and then long press to continuously decrease 0.1V, 1V in slow steps3. ADJ-I is the current setting potentiometer. Turn clockwise to increase the set current. When the load current reaches the set current, it enters the constant current state, and the CC constant current indicator (red) lights up. The OUT indicator is the output status indicator, it is on when there is voltage at the output terminal, otherwise it is off; the CHAR indicator is the charging indicator, which is on when charging, and the FULL indicator is the full indicator. If the set constant current value is 2A, charging When the current reaches below 0.2A, turn the light, the FULL indicator is on, and the CHAR indicator is offInstructions:1. Use as an ordinary step-down module with overcurrent protection capability- Press the button to set the output voltage to the desired voltage value- Rotate the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (connect the two test leads directly to the output terminal), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the overcurrent protection value you want to set. (For example, the current value displayed by the multimeter is 2A, then the current can only reach 2A when the module is used, and the red constant current indicator light is on when the current reaches 2A, otherwise the indicator light is off) 2. Use as a battery charger- The module without constant current function cannot be used to charge the battery. Because the voltage difference between the exhausted battery and the charger is very large, the charging current is too large and the battery is damaged, so the battery should be used at the beginning. Constant current charging, when the charging reaches a certain level, it will automatically switch back to constant voltage charging- Determine the float voltage and charging current of the battery to be recharged; (if the lithium battery parameter is 3.7V/2200mAh, then the float voltage is 4.2V, and the charging current can reach 1C, that is, 2200mA)- Under no-load conditions, the output voltage of the button reaches the floating charge voltage; (if charging a 3.7V lithium battery, adjust the output voltage to 4.2V)- First turn the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (just connect the two test leads to the output terminal directly), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the predetermined charging current value- Connect the battery and charge (when setting: no battery is connected to the output terminal)3. Used as a high-power LED constant current driver module- Determine the operating current and operating voltage needed to drive the LED- Under no-load conditions, press the button to set the output voltage to reach the LED working voltage- First turn the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (just connect the two test leads to the output terminal directly), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the predetermined LED operating current- Connect the LED, test the machine (when setting: output no-load, do not connect the LED light) Precautions: 1. It is forbidden to short-circuit the input IN- of the module with the output OUT-, otherwise the constant current function will fail 2. Make sure that the power of the power supply is always greater than the power required by the output load. When the module is seriously hot, please reduce the power usage.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 10cm * 3cm / 3.94inch * 3.94inch * 1.18inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs40HQ: 412 cartons * 404 pcs = 166448 pcs
£5.99