Resultados de la búsqueda de "motorcycle electronics"

1. Small and light, no sense of wearing2. High-quality audio, stable transmission3. 8 hours of ultra-long battery life4. Direct connection to Osmo Audio products, original sound quality5. Active noise reduction, two adjustable levels6. Automatic limiter, anti-explosive soundTechnical parameters:--Mic Mini transmitter1. Dimensions: 26.55 mm long, 26.06 mm wide, 15.96 mm high2. Weight: about 10 grams (without magnetic sheet)3. Wireless mode: GFSK 2Mbps4. Equivalent isotropic radiated power (EIRP): less than 20 dBm5. Wireless mode operating frequency: 2.4000 GHz to 2.4835 GHz6. Bluetooth protocol: Bluetooth 5.37. Bluetooth operating frequency: 2.4000 GHz to 2.4835 GHz8. Bluetooth transmission power (EIRP): less than 20 dBm9. Battery type: Li-ion10. Battery capacity: 114 mAh11. Battery energy: 0.44 Wh12. Battery voltage: 3.87 V13. Charging specification: maximum 5 V14. Charging environment temperature: 5- 45 degrees Celsius15. Working environment temperature: -10- 45 degrees Celsius16. Charging time: about 90 minutes17. Working time: about 11.5 hours (using Mic Mini (one transmitter and one receiver), without noise reduction function, in a non-interference environment, close-range sound reception, transmitter and receiver connected, and receiver connected to the camera with a 3.5 mm cable.)Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 15cm * 10cm * 8cm / 5.91inch * 3.94inch * 3.15inch Qty per Carton 36 Carton Weight 6.50kgs / 14.33lb Carton Size 47cm * 34cm * 32cm / 18.5inch * 13.39inch * 12.6inch Loading Container 20GP: 521 cartons * 36 pcs = 18756 pcs40HQ: 1210 cartons * 36 pcs = 43560 pcs

Leer Más Menos

parameter:1. Rated voltage: 12/24V lead-acid battery voltage2. Maximum charge and discharge current: 60A3. Solar panel input voltage range: maximum 18V-750W/36V-1500W4. Load working time setting: 1-24 hours adjustable5. Charging mode: PWM6. Overvoltage protection: 17V/34V7. Fully disconnected: 13.8V/27.6V adjustable8. Undervoltage disconnection: 10.8V/21.6V adjustable9. Over-discharge recovery voltage: 12.2V adjustable10. Wiring specification: less than or equal to No. 3 AWG (22 square millimeters)11. Working environment temperature: -25-55 degrees CelsiusFeatures:1. This controller is used for solar off-grid systems or solar street lights, solar power generation systems, etc., to adjust charging and discharging. It can prevent the battery from over-discharging and causing damage.2. 12V/24V automatic identification of lead-acid battery voltage, maximum charge and discharge current 60A3. Vivid LCD graphic symbol LCD display, simple button mode.4. Intelligent micro-processing with automatic temperature compensation according to the pulse width PWM charging method.5. Adjustable charge and discharge control parameters, load working mode that can be set6. Various protection functions such as battery reverse discharge, undervoltage, and reverse connection protection7. Polarity reverse connection protection, overload protection, overcharge protection, short circuit protection.8. Has a wide range of applicability, automatic recognition of day/night9. The timing period of street lamps is adjustable from 1 to 24 hours, with dual period load discharge setting function10. Unique dual time control enhances the flexibility of the street light system11. Adopt temperature compensation, automatically adjust charging and discharging parameters, and improve battery lifeSpecification: Package Weight One Package Weight 0.76kgs / 1.68lb One Package Size 23cm * 16cm * 9cm / 9.06inch * 6.3inch * 3.54inch Qty per Carton 38 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 38 pcs = 6726 pcs40HQ: 412 cartons * 38 pcs = 15656 pcs

Leer Más Menos

1. Sliding blade design, compatible with various specifications of batteries2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. Intelligent compatibility, 4-slot independent control, no influence on each other5. Input: 220V6. Output: 1.2V 250mA7. Rechargeable battery: NI-MH/NI-CD AAA/AA8. Size: about 10.2 x 6.9 x 2.9cm9. Weight: about 120g10. Description: only the charger, excluding other items such as batteries in the pictureSpecification: Package Weight One Package Weight 0.13kgs / 0.28lb One Package Size 13cm * 8cm * 4cm / 5.12inch * 3.15inch * 1.57inch Qty per Carton 120 Carton Weight 13.50kgs / 29.76lb Carton Size 41cm * 28cm * 42cm / 16.14inch * 11.02inch * 16.54inch Loading Container 20GP: 553 cartons * 120 pcs = 66360 pcs40HQ: 1283 cartons * 120 pcs = 153960 pcs

Leer Más Menos

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto E40. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Specification: General Compatible with Motorola: Moto E40 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos

1. Deserializer: MAXIM (ADI) MAX9296A2. Supported hosts: Raspberry Pi 5, Jetson Orin NX/Nano development kits3. Supported serializer models: MAX9295, MAX96717, MAX96705, etc.4. GMSL input: 2 x GMSL2 (GMSL1 compatible) cameras5. Input interface: 2 x MATE_AX FAKRA Z connectors6. Output interface: 22-pin CSI interface7. Supported GMSL camera models: ISX031, etc.8. Power supply: 5V inputPackage contents:- MAX9296-GMSL-DESER-MODULE x 1- 22-pin FFC cable (about 100mm) x 2- PH2.0 3-pin connector cable x 1- Screw kit x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 14cm * 12cm * 4cm / 5.51inch * 4.72inch * 1.57inch Qty per Carton 72 Carton Weight 6.00kgs / 13.23lb Carton Size 50cm * 38cm * 30cm / 19.69inch * 14.96inch * 11.81inch Loading Container 20GP: 467 cartons * 72 pcs = 33624 pcs40HQ: 1086 cartons * 72 pcs = 78192 pcs

Leer Más Menos

Features1.Pixels: 5 megapixel2.Resolution: 2592x19443.Sensor: OV5640 3.1 1.4um x 1.4um pixel with OmniBSI technology, high sensitivity, low crosstalk, low noise 3.2 Automatic image control functions: AEC, AWB, ABF, ABLC, etc. 3.3 Image quality controls: color saturation, hue, gamma, sharpness, lens correction, etc. 3.4 Supports image scaling, panning, windowing, etc.4.Lens: 4.1 CCD size: 1/4inch 4.2 Aperture (F): 2.8 4.3 Focal Length: 2.8mm 4.4 Diagonal: 63 degree5.Output Formats: 5.1 YUV(422/420)/YCbCr422 5.2 RGB565/555/444 5.3 CCIR656 5.4 RAW RGB 5.5 Compressed Data6.Operating Voltage: 3.3V7.Control Interface: SCCB (I2C compatible)8.Data Interface: DVP 8-bit9.Dimension: 35.70mm × 23.90mmSpecification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 4cm * 1cm / 2.36inch * 1.57inch * 0.39inch Qty per Carton 4000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4000 pcs = 1108000 pcs40HQ: 644 cartons * 4000 pcs = 2576000 pcs

Leer Más Menos

1. CM4 socket: Suitable for all variants of Compute Module 4 2. Ethernet: Dual Gigabit Ethernet RJ45 3. USB: USB 3.2 Gen1 x 3 4. PIN header: 40PIN GPIO header x 1 5. HD media interface: HD-MI x 2, supports 4K 30fps output 6. DSI display: MIPI DSI display port x 1, 15pin 1.0mm FPC connector 7. CSI camera: MIPI CSI-2 camera port x 2, 15pin 1.0mm FPC connector 8. Power input: 7V-36V 9. FAN: 5V/12V, allows speed adjustment and measurement 10. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variantsSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.80kgs / 39.24lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs

Leer Más Menos

1. Espressif official ESP32-WROVER module 2. New ESP32 version: REV1 3. Wireless Internet 4. Bluetooth 5. 4MB flash memory 6. 8MB PSRAM 7. Lithium battery interface, 500mA maximum charging current 8. Support TF memory card 9. With 3D wiresSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 10cm * 6cm * 1cm / 3.94inch * 2.36inch * 0.39inch Qty per Carton 400 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 400 pcs = 375600 pcs40HQ: 2180 cartons * 400 pcs = 872000 pcs

Leer Más Menos

1. Operating voltage: 3.3V/5V2. Resolution: 360 x 360 pixels3. Brightness: 450 cd/square meters4. Contrast ratio: 1200:15. Display driver IC: ST779166. Touch controller IC: CST816S7. Display interface: QSPI8. Touch interface: I2C9. Display panel: IPS10. Touch type: Capacitive11. Display colors: 262K12. Display size: Approx. 45.68 x 45.68 mm13. Dimensions: Approx. 55 x 55 x 9.1 mmFeatures:1. 360 x 360 resolution, 262K colors; capable of clearly displaying color images.2. High-transmittance touchscreen with fast response and long service life.3. Built-in ST77916 display driver and CST816S capacitive touch controller; communicates via QSPI and I2C interfaces respectively, minimizing pin usage; compatible with main control boards such as ESP32-S3, Raspberry Pi Pico, and STM32.4. Includes example code and resources for ESP32, Pico, STM32, and more.5. Onboard level-shifting chip; compatible with 3.3V/5V power inputs.Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 100 Carton Weight 6.00kgs / 13.23lb Carton Size 40cm * 32cm * 30cm / 15.75inch * 12.6inch * 11.81inch Loading Container 20GP: 694 cartons * 100 pcs = 69400 pcs40HQ: 1612 cartons * 100 pcs = 161200 pcs

Leer Más Menos

1.5inch OLED display Module, 128x128 pixels, 16 gray scale, SPI/I2C interfaceOverviewThis is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.Features1. 128x128 high resolution2. 16 gray scale, better display effect3. Support SPI or I2C interface, configured via onboard resistor4. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Driver: SSD13272. Interface: SPI / I2C3. Display color: White4. Gray scale: 165. Resolution: 128x128 (most other competitive products are typically 128x64)6. Viewing angle: >160 degree7. Operating voltage: 3.3V / 5V8. Dimension: 44.5 x 37 (mm)Package Contents1. 1.5 inch OLED Module x12. PH2.0 7Pin x1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs

Leer Más Menos

color: Blue, material: Steel, size: 29.5cm * 25.25cm * 30.75cm1. Tire Changing Stand: This dirt bike tire changing stand is applicable for tire size 16-24 inch, which makes motorcycle wheel changes easier.2. Solid Construction: The motorcycle tire changing stand is made of high-grade steel frame with powder coating. This ensures that your stand is rust and corrosion resistant and aids in functional, stable platform for your wheel during tire bead removal and installation3. Adjustable Bead Popper: This motorcycle tire machine includes an adjustable bead popper with a long leverage handle to help with the removal and installation of your tire beads4. Stable Base & Easy Assemble: The triangular structure base of the tire changing station creates a solid, balanced foundation on which to set your tires, the motorcycle tire changer is compact and light weight for easy transportation and storage5. Tire Changing Stand Information: Overall Dimension: 29.5 inch L x 25.25 inch W x 30.75 inch HThis tire changing stand is specially designed by to give a quick, easy way to switch out tires in the shop or at the track. Constructed from high grade steel with powder coating, this motorcycle tire stand is built for strength and longevity. Included with the stand is a built in bead breaker that adjusts for different size tires (applicable for tire size 16-24 inch) to ensure good leverage in popping the bead. This is a must-have tool that makes a tough tire change easy.Specification: Package Weight One Package Size 29.5cm * 25.3cm * 30.8cm / 11.61inch * 9.96inch * 12.13inch Qty per Carton 1 Carton Weight 23.20kgs / 51.15lb Carton Size 20cm * 20cm * 8cm / 7.87inch * 7.87inch * 3.15inch Loading Container 20GP: 8333 cartons * 1 pcs = 8333 pcs40HQ: 19345 cartons * 1 pcs = 19345 pcs

Leer Más Menos

Color: Red, Material: Metal, Size: 60cm x 55cm x 43cm1. ADJUSTABLE: This motorcycle stand fits most standard motorcycle wheels, featuring 3 adjustment levels to accommodate diameters of 43 cm, 48 cm, and 51 cm.2. DURABLE STRUCTURE: The sturdy, powder-coated, rust-resistant metal frame withstands corrosion and supports up to 250 kg.Rubber caps prevent surface scratches.3. FREESTANDING: The stand can be mounted on a flat surface and holds the front wheel upright for maintenance.4. STABLE AND SECURE: Mounting holes allow the chock to be secured to trucks and trailers, keeping the motorcycle stable during transport.5. DIMENSIONS: Overall dimensions: 60L x 55W x 43H cm.Assembly required.Our motorcycle stand offers a sturdy, durable support system compatible with most standard motorcycle wheel sizes.Pre-drilled mounting holes allow the chock to be secured to a truck bed or trailer for stable transport.The structure is easy to assemble, durable, and robust, ensuring years of use.Specification: Package Weight One Package Size 60cm * 55cm * 43cm / 23.62inch * 21.65inch * 16.93inch Qty per Carton 1 Carton Weight 7.50kgs / 16.53lb Carton Size 63cm * 24cm * 17cm / 24.8inch * 9.45inch * 6.69inch Loading Container 20GP: 1037 cartons * 1 pcs = 1037 pcs40HQ: 2408 cartons * 1 pcs = 2408 pcs

Leer Más Menos