Resultados de la búsqueda de "rechargeable work light"

Notes:1. There are MOS and other components on the board, which are easily damaged by soldering iron induction electricity or static electricity. Please make sure that the soldering iron used is grounded (and the ground wire of the power strip is connected). It is best to wear anti-static gloves when operating.2. Be careful not to install the battery upside down, otherwise the board may burn.3. Please choose a power supply with sufficient power. Only in this way can the board work properly.4. The board power supply should not be higher than 5V.5. Please do not modify the board without technical confirmation.6. It is normal for the module to heat up when working at high power, just pay attention to fanning.Product Introduction:1. This product is suitable for power-off equipment without power outages. When there is power, use external power supply, and automatically switch to battery power supply seamlessly when there is a power outage.2. If the USB interface is used for power supply, it is recommended to use the Type-c interface. Compared with the microUSB interface, the current that can pass is much larger, and the maximum current that can pass is 5A.3. Suitable for routers, cameras, development boards and other devices, seamlessly switch to battery power when power is off, and keep the network connected when power is off.4. Seamless switching between external power supply and battery dual power supply (no delay)5. Uninterrupted power supply, automatic start when power is off, automatic charging when incoming call.6. Output voltage 5V/9V/12V optional, other voltages can be customized.7. Four practical functions: lithium battery charging, lithium battery protection, boost output, and UPS switching.8. Two-color LED indicates charging status, the green light is always on when full, and charging stops automatically.9. Type-C interface, large current.10. Product size: 89 x 42mm11. Weight: about 37gFunction description:1. UPS function: When the power supply is powered, the power supply directly supplies power to the load through the boost circuit, and charges the lithium battery at the same time. Once the power supply is off, the battery path is automatically started to supply power to the load through the boost circuit.2. Boost circuit: peak power up to 20W, rated power up to 15W, BOST boost circuit, built-in 12A high current MOS, efficiency up to 96%, module static power consumption 25mA, optional 5V/9V/12V output.(Load normal recommendation <15W. Output 5V: current 3A, output 9V: current 1.6A, output 12V: current 1.2A)3. Lithium battery protection overcharge, over discharge, over temperature, over current protection (if short-circuited by mistake, it will enter the protection state and no output, and it will automatically activate and restore output when connected to 5V charging)Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 7cm * 4cm / 4.72inch * 2.76inch * 1.57inch Qty per Carton 144 Carton Weight 9.80kgs / 21.61lb Carton Size 38cm * 30cm * 50cm / 14.96inch * 11.81inch * 19.69inch Loading Container 20GP: 467 cartons * 144 pcs = 67248 pcs40HQ: 1086 cartons * 144 pcs = 156384 pcs

Leer Más Menos

Feature: 1. High brightness: The latest ZES chips with 6500K cold white LED chip; 200% brighter than the existing halogen headlights. Advanced technology ensures perfect beam patterns without any black spots or fog lights. 2. Strong heat dissipation: equipped with a highly silent cooling fan, the speed is up to 12000/min, and the heat dissipation efficiency is high, which can avoid the temperature accumulation on the lamp bead and prolong the service life of the lamp bead. 3. Simple Installation: Installation only takes 10 minutes. No relay. There is no capacitor. No additional wiring. Plug and play. 4. IP68 waterproof: using integrated radiator and aluminium body self-cooling, waterproof and heat-proof. Even in extreme cases, it can work normally. Automatic short circuit protection. 5. Ultra-thin lamp, the distance of lamp beads is only 0.7mm, the focus is stronger, the irradiation distance is farther, and it is more suitable for night or low visibility scenes. Specification: 1. Wattage: 17W 2. High luminous efficacy Flux: 2000LM 3. Waterproof: IP68. 4. Voltage: 9V to 32V. Wide-range voltage, constant urrent control, anti-interference circuit design. 5. Application: Upgrade for Car, Truck, SUV, RV HID Xenon Headlight. 6. Long range: 6500K color temperature and 200m light range.Specification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 14cm * 12cm * 6cm / 5.51inch * 4.72inch * 2.36inch Qty per Carton 50 Carton Weight 10.50kgs / 23.15lb Carton Size 48cm * 44cm * 42cm / 18.9inch * 17.32inch * 16.54inch Loading Container 20GP: 300 cartons * 50 pcs = 15000 pcs40HQ: 697 cartons * 50 pcs = 34850 pcs

Leer Más Menos

1. Lamp body installation: unscrew the bolts on the decorative strip of the lamp frame, remove the decorative strip of the lamp frame, and expose the bracket; unscrew the screws and springs on the bracket, and remove the original lamp and bracket together; remove the bracket and the original lamp Separate and replace the product; place the product and the bracket on the lamp frame, screw on the bracket screw, install the lamp frame decorative strip and lock it with the screw. 2. Wiring mode: The far and near beams are connected to the headlight connector of the original car (H4 connector) The turn signal is connected to the positive pole of the grid lamp (yellow wire) Daytime running light, background light connects to ACC (red line) 3. Use as a work light: the rear shell is equipped with a bracket, which is directly screwed to the location where it needs to be installed. 4. Size: 4x6 inches 5. Power: 20W 6. Waterproof rating: IP67 7. Color temperature: 6500K 8. Voltage: DC12VSpecification: Package Weight One Package Weight 1.39kgs / 3.06lb One Package Size 18cm * 17cm * 12cm / 7.09inch * 6.69inch * 4.72inch Qty per Carton 12 Carton Weight 16.20kgs / 35.71lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 12 pcs = 6264 pcs40HQ: 1212 cartons * 12 pcs = 14544 pcs

Leer Más Menos

1. Brand new and high quality 2. Low power consumption,save your power supply 3. High luminance 4. Easy to install, just plug & play 5. Energy conservation and environmental protection Specification: General Weight 14g Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 13cm * 9cm * 2.5cm / 5.12inch * 3.54inch * 0.98inch Qty per Carton 400 Carton Weight 11.44kgs / 25.22lb Carton Size 54cm * 47cm * 52cm / 21.26inch * 18.5inch * 20.47inch Loading Container 20GP: 202 cartons * 400 pcs = 80800 pcs40HQ: 469 cartons * 400 pcs = 187600 pcs

Leer Más Menos

1. Dual-axis motherboard clamps, new jaws / dual-board clamping / tightly and firmly / alloy base / high-temperature synthetic stone / anti-static corrosion resistance, more in line with the way maintenance personnel use, more suitable for cell phone motherboard chip clamping2. New jaw design, clamping firm, and tight, screw structure, accurate alignment does not come loose, the same direction of operation, the habit of uniformity3. Dual-plate clamping, dual-axis screw clamping, suitable for a variety of cell phone models4. High-temperature resistant synthetic stone panel, anti-static, anti-corrosion5. Alloy base, steady and solid, the fixture is stable and does not slide. In addition to fixing cell phone motherboards, it can also fix CPU, hard disk, and other precision ICs that need to be de-gluedSpecification: Package Weight One Package Weight 0.31kgs / 0.69lb One Package Size 21cm * 10cm * 3cm / 8.27inch * 3.94inch * 1.18inch Qty per Carton 60 Carton Weight 19.60kgs / 43.21lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 60 pcs = 35460 pcs40HQ: 1373 cartons * 60 pcs = 82380 pcs

Leer Más Menos

1. Measure current wind speed, temperature2. Measure wind speed / MAX wind flow/min wind flow3. 2 / 3 wind flow value / average value4. Wind speed/flow units and temperature units selection5. Real-time measurement when connecting USB with computer software6. Backlight and data holding( HOLD)7. Low battery indication8. Powered by rechargeable lithium-ion batteries9. Automatic shutdown setting8. 4 x AAA batteries (Not Included)Specification: Package Weight One Package Weight 1.25kgs / 2.76lb One Package Size 32cm * 25cm * 10cm / 12.6inch * 9.84inch * 3.94inch Qty per Carton 8 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 34cm / 20.47inch * 16.54inch * 13.39inch Loading Container 20GP: 359 cartons * 8 pcs = 2872 pcs40HQ: 833 cartons * 8 pcs = 6664 pcs

Leer Más Menos

1. Shell material: PC2. USB1: QC 3.0 18W fast charging port (compatible with 5V/2.4A)3. USB2: 5V/2.4A 12W charging port4. Dual USB ports, support all standard USB devices, such as smartphones, tablets, MP3 players, etc., support charging two devices at the same time5. Provide up to 100W of power6. The 12/24V power adapter is suitable for all standard cigarette lighter sockets in the car, such as GPS, handheld vacuum cleaners and electric air pumps, seat heaters, humidifiers, cooling boxes, DVD players, etc.7. This fast charging car charger will automatically stop working when the smart IC is in danger of overcharging/overheating/short circuit/overcurrent/overvoltage/output overvoltage/output overcurrent8. The car charger adapter automatically detects and displays the car battery voltage, and can display the charging current9. Monitor vehicle battery voltage when not charging any devices10. Display the charging current when charging, if the battery voltage is too high or too low, the LED display will flash to remind11. Bluetooth version to play music from Bluetooth enabled devices via FM signal; transfer music from USB flash drive12. Size: 59x96x32mm13. Weight: 58 gramsSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 12cm * 4cm * 8cm / 4.72inch * 1.57inch * 3.15inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs40HQ: 412 cartons * 356 pcs = 146672 pcs

Leer Más Menos

1. Just plug this solar charger into your vehicle's 12-volt lighter socket and position the panel to pick up the most daylight possible. 2. Or, if you prefer, use the included alligator clips to connect it directly to the battery. (you can mount this solar power panel on your windshield with the two suction cups or fix it on the sun visor with the back strips) 3. Solar panel: 18V 4.5W 4. Output voltage: 12V 5. Package Contents 1 x Cigarette Lighter Power Cable(3m) 1 x Charging Clip Cable(3m) 1 x User Manual 2 x Suction Cups(Diameter: 33mm )Specification: General Output Voltage 12V Output Current up to 250mA Size 320*120*5mm Weight 180g Package Weight One Package Weight 0.29kgs / 0.64lb One Package Size 34cm * 13cm * 3.8cm / 13.39inch * 5.12inch * 1.5inch Qty per Carton 40 Carton Weight 18.90kgs / 41.67lb Carton Size 51cm * 37cm * 36cm / 20.08inch * 14.57inch * 14.17inch Loading Container 20GP: 392 cartons * 40 pcs = 15680 pcs40HQ: 911 cartons * 40 pcs = 36440 pcs

Leer Más Menos

1. Based on the circular appearance, this product integrates the DRL daytime running light function in the middle, which makes the vehicle more beautiful and dynamic during driving, and at the same time adds a little safety.2. It is more safe and ornamental during driving. In addition to providing an attractive appearance, its rotating flashing effect attracts more attention when lit, thus improving the visibility.3. The simple and universal screw lock installation method can easily install the signal light on the vehicle.4. Parameters:- Material: 18 high-brightness SMD lamp beads (9 turning lights, 9 daytime running lights), high-strength ABS plastic shell.- Turn signal light color: amber yellow light- Luminous color of running light: optional blue light, red light, white light (other light colors can also be customized)- Lamp handle material: soft rubber- Working voltage: DC 12V- Power: 1.44W5. Wiring method:- Black wire harness to ground/negative (-)- Green wire harness to turn signal lamp positive (+)- The red wire harness is connected to the positive terminal of the steering and running lights (+)Specification: Package Weight One Package Weight 0.14kgs / 0.31lb One Package Size 21.5cm * 12cm * 5.5cm / 8.46inch * 4.72inch * 2.17inch Qty per Carton 100 Carton Weight 15.00kgs / 33.07lb Carton Size 58cm * 52cm * 29cm / 22.83inch * 20.47inch * 11.42inch Loading Container 20GP: 304 cartons * 100 pcs = 30400 pcs40HQ: 707 cartons * 100 pcs = 70700 pcs

Leer Más Menos

1. Supply voltage: 5V-24V2. Working temperature: -20-60 degrees Celsius3. Control mode: 10m4. Connection mode: common anode5. Interface type: DC head6. Control mode: infrared7. Protection level: IP258. Through this dimmer, the LED will be adjusted to the correct light intensity9. Mini LED dimming controller, suitable for single-color LED lamps such as 5050 2835 3528 3014 573010. Equipped with a 6-button remote control, the operation is very simple11. Mini size, easy to install in narrow ceilings12. Product size: 53x7x6mm13. Remote control size: 65x24x11mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 10cm * 5cm * 4cm / 3.94inch * 1.97inch * 1.57inch Qty per Carton 224 Carton Weight 23.50kgs / 51.81lb Carton Size 42cm * 37cm * 34cm / 16.54inch * 14.57inch * 13.39inch Loading Container 20GP: 504 cartons * 224 pcs = 112896 pcs40HQ: 1171 cartons * 224 pcs = 262304 pcs

Leer Más Menos

Características 1. Células solares de silicio monocristalino. Ofrecen una alta tasa de conversión fotoeléctrica. Protección del medio ambiente y energía inagotable. 2. El panel solar conectado con pinza de cocodrilo se puede utilizar para baterías de automóviles, motocicletas, tractores, barcos y más. 3. Adopte un panel solar Sunpower importado, transformación de energía solar de alta eficiencia, panel de voltaje estable, no necesita preocuparse por dañar su teléfono 4. Salida USB estándar apta para teléfonos móviles y otros dispositivos digitales portátiles. 5. Sin batería incorporada, sin problemas causados ​​por el calor o la luz solar intensa. 6. Salida CC: 18 V 20 W (máx.) 7. Salida USB: 5 V 2,5 A (máx.), compatible con protocolos de carga rápida DCP, QC 2.0, QC 3.0, MTK PE1.1/PE2.0, FCP, SCP, SFCP Presupuesto 1. Potencia máxima (vatios): 20 W 2. Material: PET + oblea de silicio 3. Marca del material: Sunpower 4. Tamaño de las celdas (ancho y alto): 125 mm x 125 mm, monocristalino 5. Número de celdas: 6 6. Peso por pieza: 589g 7. Tamaño del módulo (ancho y alto): 42 x 28,3 x 0,5 cm 8. Coeficiente de temperatura de Isc: +/-0,05 % grado C 9. Coeficiente de temperatura de Voc: -0,33 % grado C 10. Coeficiente de temperatura de potencia: -0,23 % grado C 11. NOCT (temperatura nominal de funcionamiento de la celda): 45 grados C (+/- grados C) 12. Tolerancia de producción: -5 13. Salida de potencia máxima USB: 5 V 3 A/9 V 2 A/12 V 1,5 A 14. Potencia máxima de salida CC: 19,8 V 1,02 A 15. Voltaje de circuito abierto: puerto USB 5 V, puerto CC 23,4 V 16. Función de protección: protección contra cortocircuitos, protección contra sobrecargas, protección contra sobrecalentamiento. Especificación: General Material Silicio monocristalino de grado A Panel solar 40,5 x 27 cm Tamaño 42*28,3*0,5 cm Peso 589 gramos Peso del paquete Peso de un paquete 1,00 kg/2,20 lb Un tamaño de paquete 45 cm x 30 cm x 4 cm (17,72 pulgadas x 11,81 pulgadas x 1,57 pulgadas) Cantidad por caja 20 Peso de la caja 16,80 kg/37,04 lb Tamaño de la caja 62 cm x 45 cm x 42 cm (24,41 pulgadas x 17,72 pulgadas x 16,54 pulgadas) Contenedor de carga 20GP: 227 cajas * 20 uds. = 4540 uds. 40HQ: 528 cajas * 20 piezas = 10560 piezas

Leer Más Menos

Features:1. It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc.2. It can also be used to detect infrared wave forms. 3. It also can detect zener diode and has the function of self-calibration.4. After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.5. One button operation, automatically detect and shutdown, and you can press the multi-functional button to close the detector too.6. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly.7. Not like the usual black and white display, this detector will show results in color. Specifications:1. Display: 3.5inch TFT Screen2. Diode range: < 4.5V3. Zener diode:Transistor Detect Area: 0.01-4.5V 4. Zener diode detect Area: 0.01-30V5. Triac range: IGT < 6mA6. Capacitance: 25pF-100mF7. Resistor: 0.01-50MΩ8. Inductance: 0.01mH-20H9. Battery: 0.1-4.5V10. Power mode: Rechargeable lithium battery ( include)11. Item size: 8.8 x 8 x 2.8cm / 3.47 x 3.15 x 1.10in 12. Item weight: 111.5g / 3.94ozSpecification: Package Weight One Package Weight 0.13kgs / 0.29lb One Package Size 14.5cm * 12cm * 2.7cm / 5.71inch * 4.72inch * 1.06inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs40HQ: 412 cartons * 242 pcs = 99704 pcs

Leer Más Menos