Resultados de la búsqueda de "replacement electronics"

1. Replacement to replace car keys with worn out key shells to new key shells.2. For Chevrolet Opel Buick3. Only the key casing and key blade, no electronic interior.4. Weight: 50g.5. Size: 61x30x17mm.Notice:1. This is not a remote control, it is just a remote key shell replacement.2. There is no electronic unit inside.3. Before buying, please check if your key matches this product.Specification: General Compatible with Opel: Corsa, Signum, Vivaro, Combo, Movano, E9, Movano U9, Astra, Zafira, Insignia Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 7cm * 4cm * 2cm / 2.76inch * 1.57inch * 0.79inch Qty per Carton 400 Carton Weight 25.00kgs / 55.12lb Carton Size 37cm * 34cm * 22cm / 14.57inch * 13.39inch * 8.66inch Loading Container 20GP: 963 cartons * 400 pcs = 385200 pcs40HQ: 2236 cartons * 400 pcs = 894400 pcs

Leer Más Menos

1. Module parameters:- Power supply voltage: DC4.5-6V (micro USB interface)- Working current: no more than 70mA- Discharge voltage: 1.00V-15.00V Resolution 0.01V- End voltage range: 0.5-11.0V- Support through current: no more than 3.000A resolution 0.001A- Voltage measurement error: less than 1% + 0.02V- Current measurement error: less than 1.2% +-0.002A- Battery capacity range: 9999Ah (1Ah = 1000mAh) 2.2. When the value is large, it is switched by decimal point shift. When it is less than 10Ah, it will be displayed as X.XXX, when it reaches more than 10Ah, it will be displayed as XX.XX, and so on.3. Circuit board size: 50mmX37mm4. Finished product size: 50mmX37mmX17mm (Length X Width X Height, including copper foot height)5. Weight of board and accessories: single board 28g (including copper pillar), two 5W ceramic resistors 9g, 50W resistor about 27g (including wire)6. Note: In order to improve the voltage measurement accuracy, this circuit is specially designed with DC bias. When the terminal is connected nothing, a small voltage will be displayed, which does not affect the actual measurement. 0V) will display 0. If you want to understand the principle, you can check the superposition theorem in electrical engineering.7. How to use:- The battery under test should be fully charged first.- Connect the positive pole of the battery under test to the input positive pole, and the negative pole to the negative pole of the input. Connect the load to the output positive pole and the output negative pole, and connect the tester micro USB with working power (not available for desktop or notebook USB power supply). The battery voltage is displayed at this time.- To start the test directly, just press the “OK” button, the tester can automatically formulate a suitable termination voltage according to the full charge voltage of the battery, and will flash the display 3 times to start the test. Need to manually set the termination voltage, just press the "+" or "-" button to modify in the battery voltage display state, the termination voltage is displayed at the beginning of P, the back represents the voltage value, the resolution is 0.1V, after setting, press "OK" "start testing.- After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, the display data stays above the capacity (Ah) and flashes quickly with the corresponding indicator light, the displayed capacity is the actual discharge capacity of the battery, press it "OK" can stop the flashing and let the data display stably. Press the "OK" button again to restore to the state of just powering up and replace the battery to test the next section ...8. Error code and meaning:- Err1: The battery voltage is higher than 15V- Err2: The battery voltage is lower than the set termination voltage- Err3: The battery cannot bear the load discharge current or the line internal resistance is too large- Err4: Current is too large (current exceeds 3.1A)- Err5: Improper use or wiring error has caused the device to burn down and cannot be used (current sampling or control switch MOS burned)9. Note: If the battery is reversed, when the load is turned on and the load current is large (about> 0.8A), the circuit switch tube may be damaged!10. Secondary calibration operation: Press and hold three buttons to power on the tester at the same time, enter the calibration mode, first display the number of calibration records, then enter the formal calibration sampling program to display 0u0A, then short-circuit the input positive and negative poles and press "OK "Button to complete displaying J10u, apply a standard DC voltage of 10.00V between the input positive and negative electrodes, press the" OK "button, and then display J2.0A, apply to the output negative electrode (inflow direction) and input negative electrode (outflow direction) After a constant DC current of 2.0A, press the "OK" button once to complete the calibration. The tester will pre-check the calibration data. If the calibration data is reliable, it will display 4 calibration numbers in turn and then exit. If the pre-audit believes that the data is not reliable, discard the data and exit.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 23.00kgs / 50.71lb Carton Size 50cm * 50cm * 46cm / 19.69inch * 19.69inch * 18.11inch Loading Container 20GP: 231 cartons * 500 pcs = 115500 pcs40HQ: 538 cartons * 500 pcs = 269000 pcs

Leer Más Menos

1. The remote control has buttons, which is easy to use and can be easily controlled with one hand.2. Suitable for Daikin 433A1 air conditioner remote control3. No programming or setup required.4. Note: It is not original, it is a replacement! Most of the features are the same as the original remote, but may have some different buttons!5. Material: ABS plastic6. Power supply method: AAA battery (not included)7. Frequency: 433 MHzSpecification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 18cm * 8cm * 3cm / 7.09inch * 3.15inch * 1.18inch Qty per Carton 120 Carton Weight 11.90kgs / 26.23lb Carton Size 38cm * 34cm * 47cm / 14.96inch * 13.39inch * 18.5inch Loading Container 20GP: 439 cartons * 120 pcs = 52680 pcs40HQ: 1019 cartons * 120 pcs = 122280 pcs

Leer Más Menos

About the product1. Replacement LCD screen + touch screen digitizer assembly (TFT Material) for Xiaomi Black Shark 4S / Black Shark 4S Pro 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with Xiaomi: Black Shark 4s Pro, Black Shark 4s Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Xiaomi: Redmi Note 14 Pro 5G Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 8.60kgs / 18.96lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly with frame (TFT Material) for Samsung Galaxy A30s 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Samsung: Galaxy A30s Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos

1. Made of high-quality ABS, wear-resistant and durable, giving you a comfortable feel.2. Brand new replacement remote control, no need to set it up to use.3. Comfortable buttons, made of silicone material, sensitive operation, long-term use4. No programming is required, install the battery to work normally. (2 AA batteries not included)5. Size: 18.7 x 3.5 x 3cm6. Weight: 96g7. Note: This remote control does not have voice function and does not come with USBSpecification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 21cm * 6cm * 4cm / 8.27inch * 2.36inch * 1.57inch Qty per Carton 96 Carton Weight 11.80kgs / 26.01lb Carton Size 42cm * 38cm * 34cm / 16.54inch * 14.96inch * 13.39inch Loading Container 20GP: 491 cartons * 96 pcs = 47136 pcs40HQ: 1140 cartons * 96 pcs = 109440 pcs

Leer Más Menos

1. 4-inch/4.3-inch DSI touchscreen with 5-point capacitive touch control2. IPS display panel with a hardware resolution of 480×8003. Full lamination process for clearer image quality4. Toughened glass touch panel with 6H hardness5. DSI interface for LCD driving; refresh rate up to 60Hz6. Supports software-controlled backlight brightness7. Aluminum alloy back casing with a purely passive cooling design8. Default display orientation is portrait; landscape mode can be enabled via software settingsScreen Specifications:1. Resolution: 480 × 800 pixels (H × V)2. Contrast Ratio: 4-inch: 800:1; 4.3-inch: 1000:13. Display Driver IC: ST7701S4. Touch Controller IC: GT9115. Communication Interface: MIPI 2-lane6. Brightness: 4-inch: 350 cd/m2; 4.3-inch: 500 cd/m27. Outline Dimensions: 4-inch: 108.30 × 65.10 mm; 4.3-inch: 116.50 × 68.90 mm8. Display Area: 4-inch: 86.40 × 51.84 mm; 4.3-inch: 93.60 × 56.16 mmSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 10cm * 3cm / 4.72inch * 3.94inch * 1.18inch Qty per Carton 120 Carton Weight 15.50kgs / 34.17lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 120 pcs = 62400 pcs40HQ: 1209 cartons * 120 pcs = 145080 pcs

Leer Más Menos

LCD Screen Features1. Wide gamut(NTSC100%), high brightness(720nits), high saturation. 2. 56-channel TDDI touch panel, sensitive and accurate, easy to play all the big games. 3. Incell+COF mechanism, no grid lines, ultra-thin and narrow border, assemble perfect. 4. 170 degree super wide viewing angle, the black screen comparable to the original. 5. When you wear sunglasses and rotate 360 degrees, the display will not change color and darken. 6. The automatic production line makes product quality more stable and reliable.Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Certificate GPSR Compatible with Apple: iPhone 14 Plus Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos

1. Ground resistance measurement range: 0.01 ohm - 3000 ohm, accuracy ±1.5% rdg ±5dgt2. Ground resistance resolution: 0.01 ohm3. Ground voltage measurement range: 0.01 - 600V AC, accuracy ±1.5% rdg ±3dgt4. Ground voltage resolution: 0.01V5. Baseline conditions: 23℃ ± 5℃, below 75% rh; auxiliary ground resistance 100 ohm ±5%, ground voltage less than 10V6. Functions: ground resistance measurement, ground voltage measurement, low resistance measurement7. Power supply: DC 6V 1.5V LR14 battery (battery not included in shipment)8. Backlight: adjustable gray-white screen backlight, suitable for dim places9. Measurement method: precise three-wire measurement, simple two-wire measurement10. Measurement method: ground resistance: rated current change method, maximum measurement current 30mA, 128Hz; ground voltage: average rectification11. Resistance line check: avoid errors caused by incomplete insertion of test lines into the instrument interface or poor contact or user replacement of extended test lines, making ground resistance measurement more accurate12. Display mode: 4-digit large LCD display, gray-white screen backlight13. Measurement indication: LED flashes during measurement, LCD countdown display14. Measurement time: ground voltage: about 2 times/second; ground resistance: about 5 seconds/each measurement15. Measurement times: more than 5000 times16. Line voltage: measurement of ground voltage: AC 600V or below17. USB interface: has USB interface, software monitoring, data can be uploaded to the computer for storage and printing18. Communication line: USB communication line 1, 1.5m long19. Data storage: 500 groups, full symbol flashing indicates storage is full20. Data inquiry: data inquiry function: MR symbol displayed21. Overflow display: over-range overflow function: OL symbol displayed22. Alarm function: alarm prompt when measurement value exceeds alarm set value23. Battery voltage: real-time display of battery voltage, reminder to charge when battery voltage is low24. Power consumption - backlight: max 25mA25. Power consumption - standby: max 25mA (backlight off)26. Power consumption - measurement: max 70mA (backlight off)27. LCD size: about 10.8 x 6.5cm28. Instrument size: about 24 x 18.8 x 8.5cm29. Test Line length: 3 lines: red 15m, yellow 10m, green 5m each 1 line30. Simple test line: 2 lines: red 1.5m, green 1.5m each 1 line31. Auxiliary ground rods: 2 rodsSpecification: Package Weight One Package Weight 3.16kgs / 6.98lb One Package Size 32cm * 29cm * 27cm / 12.6inch * 11.42inch * 10.63inch Qty per Carton 1 Carton Weight 4.00kgs / 8.82lb Carton Size 32cm * 29cm * 27cm / 12.6inch * 11.42inch * 10.63inch Loading Container 20GP: 1064 cartons * 1 pcs = 1064 pcs40HQ: 2470 cartons * 1 pcs = 2470 pcs

Leer Más Menos

About the product 1. Replacement front screen outer glass lens with OCA optically clear adhesive for OPPO R15 Pro. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with OPPO: R15 Pro Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 3.56kgs / 7.86lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly (TFT Material) for Samsung Galaxy J5 (2015) J500F, J500FN, J500F/DS, J500G, J500M. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Specification: General Compatible with Samsung: Galaxy J5 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos