Resultados de la búsqueda de "control module"

1. Operating voltage: 220V-240VAC2. Power load: 1200W3. Power frequency: 50/60HZ4. Time delay: 10 seconds~30 minutes5. Frequency system: 5.8Hz+/-75MHz CW radar6. Transmission power: 0.2mW7. Detection angle: 360 degrees8 Installation method: indoor, ceiling mounting9. Light source control: 10-2000LUX10. Detection distance: 2-10m11. Size: 95x95x42mm12. Is a motion detector with adjustable sensitivity and light detection time setting13. Based on the Doppler principle and radar technology with antenna and high performance microchip14. Can penetrate objects, so concealed installation is an option15. Not affected by temperature, such as infrared induction will be at a temperature of about 37 degrees will be time-sensitive, such as summer, indoor, outdoor, or other operating environment may be higher than this temperature16. Infrared induction, need to pass through the lens, induction range angle is small, the blind area is large, radar induction almost no blind area17. Infrared induction will be affected by air dust, dust will affect the induction distance18. Load power: 600W (resistive load, incandescent lamps and other resistive appliances) / 300W 19. Interface: 3 pole pluggable port (N, L, L), 1.5mm2 cable20. Do not reverse the zero and fire wires, otherwise some equipment may not workSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 12cm * 12cm * 6cm / 4.72inch * 4.72inch * 2.36inch Qty per Carton 318 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 318 pcs = 56286 pcs40HQ: 412 cartons * 318 pcs = 131016 pcs

Leer Más Menos

Features: 1. The circular zoom head is designed to provide the smooth and pleasing light ever to the flash 2. A treasure trove of light modulators on the edge of the magnetic circular flash head 3. GN 92ft / 42m at ISO 100 (105mm) beautiful and powerful flash 4. Using advanced lithium-ion polymer battery, it can be recycled quickly and prolong the service life 5. Less than 1.5 seconds full power cycle time 6. About 480 full power flashes per charge 7. Built-in Godox X system remote TTL power control 8. Fully compatible with TTL system functions such as exposure compensation/EXIF mark/flash value lock and high-speed sync 9. TTL communication flashing master or slave 10. Control 4 different wireless groups 11. Backlit matrix LCD 12. Multifunction buttons with digital markings for faster navigation 13. Zoom head with automatic zoom or manual control 14. High-speed sync with shutter speed up to 1/8000 second 15. Front and rear curtain sync 16. Laser AF assist light for instant autofocus even in complete darkness on low-contrast surfaces 17. SMD LED modeling light, regular and smart light from mode 18. Color temperature: 5600+/-200K 19. Horizontal 0 to 270 degrees (180 degrees in any direction) and vertical -7 degrees to 120 degrees Packageg list: 1. Flash x 1 2. US standard charging adapter x 1 3. USB charging cable x 1 4. Battery charging base x 1 5. Mini Stand x 1 6. Manual x 1 7. Storage bag x 1Specification: General Compatible with FUJIFILM: X-T4, X-T200, X-A7, X-T30, X-H1, X-A20, X-A5, X-E3, X-T100, X-T20, X100F, GFX 50S, X-A10, X-T3, X-T2, X-A3, X-Pro 2, X70, X-E2S, X-T10, X-A2, X30, X-100T, X-T1, X-E2, X-A1, HS35EXR, X-E1, X-Pro 1, X100V, X-S1, XE4, X100, S100FS, ISPro, S5 Pro, X-M1, HS33EXR, X10, MX-1700 Package Weight One Package Weight 1.00kgs / 2.20lb One Package Size 24cm * 22cm * 10cm / 9.45inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 20.50kgs / 45.19lb Carton Size 52cm * 45cm * 50cm / 20.47inch * 17.72inch * 19.69inch Loading Container 20GP: 227 cartons * 20 pcs = 4540 pcs40HQ: 529 cartons * 20 pcs = 10580 pcs

Leer Más Menos

Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs

Leer Más Menos

1. Shooting angle: 170 degrees2. Data storage time: loop recording3. Data transmission interface: USB4. Installation location: front windshield5. Power supply: USB6. Rated current: 1A7. Functions: reversing image, loop recording, lane change assistance, front vehicle distance detection, track deviation warning, front vehicle collision warning, front and rear recording, short video sharing, etc.8. Image resolution: 1080P9. Main lens aperture: 1.810. Chip: Novatek 831511. Hidden installation, no line of sight12. Dedicated to Android navigation, only need to connect to USB interface, wireless complex wiring, support after-modified Android large-screen navigation, central control real-time HD display, does not support original car screen or DVD navigation13. After-installed Android navigation, directly connected to USB interface, no other wiring required, open the exclusive APP to display HD pictures in real time14. Electronic dog fixed speed measurement, obtain navigation GPS information, 300W accurate data in the background15. ADAS driving assistance, with advanced image recognition algorithm, provides intelligent lane deviation warning and front vehicle distance in real time, detects and effectively provides safety reminders and corrects driving behavior in time, allowing you to arrive at your destination safely16. Built-in WiFi sending module, mobile phone connected to the WiFi hotspot signal of the recorder, open the exclusive APP within the signal range to view the shooting screen and playback video with zero traffic, and can also download the video to the mobile phone and share it to social software (only WIFI version supports this function, optional)17. Loop recording, automatic deletion when the memory is full, video segment recording, no missing seconds, automatically overwrite the clip when the video is full, no need to worry about insufficient memory (must be equipped with C10 high-speed memory card, otherwise it will affect this function)18. Front and rear dual recording is more comprehensive, front and rear synchronous recording, video is saved independently, driving is more secure (optional dual-lens version)19. AHD streaming rear lens, rear recording AHD digital high-definition channel, support high-definition recording and AHD reversingSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 16cm * 12cm * 7cm / 6.3inch * 4.72inch * 2.76inch Qty per Carton 36 Carton Weight 8.30kgs / 18.30lb Carton Size 50cm * 38cm * 30cm / 19.69inch * 14.96inch * 11.81inch Loading Container 20GP: 467 cartons * 36 pcs = 16812 pcs40HQ: 1086 cartons * 36 pcs = 39096 pcs

Leer Más Menos

Utilice teléfonos inteligentes o comandos de voz para automatizar fácilmente los electrodomésticos en la aplicación eWeLink. Admite 3 modos de activación, a saber, modo de pulso (aplicable a interruptores de botón), modo de borde (aplicable a interruptores SPDT) y los siguientes modos (aplicable a interruptores marcados como "ON" y "OFF" y con sensor de salida de contacto seco). Admite un modo DIY (diseñado para desarrolladores), que permite a los usuarios integrar MINIR2 en un sistema de control de hogar inteligente de terceros, logrando así un control LAN sin servicios en la nube (como Home Assistant, openHAB). Características: 1. Utilice la aplicación para controlar el dispositivo. 2. El dispositivo solo puede encenderse y apagarse mediante comandos de voz. 3. Configure la hora en la que el dispositivo inicia o deja de funcionar automáticamente. 4. Permitir a los desarrolladores grabar firmware para acceder a más funciones que deseen. 5. Admite interruptor de luz basculante para controlar el dispositivo (no incluye interruptor de retorno automático). 6. Crea una escena inteligente, enciéndela o apágala tocando el teléfono 7. Incluso si no hay una conexión Wi-Fi normal, puedes ejecutar el dispositivo en tu teléfono. parámetro: 1. Material: PC V0 2. Wi-Fi: IEEE 802.11 b/g/n 2,4 GHz 3. Compatibilidad: Android, iOS 4. Entrada: CA 100-240 V, 50/60 Hz, 10 A máx. 5. Salida: CA 100-240 V, 50/60 Hz, 10 A máx. 6. Tamaño del producto: 4,26 x 4,26 x 2 cm Especificación: Peso del paquete Peso de un paquete 0,10 kg/0,23 lb Un tamaño de paquete 15 cm x 10 cm x 5 cm (5,91 pulgadas x 3,94 pulgadas x 1,97 pulgadas) Cantidad por caja 288 Peso de la caja 30,00 kg/66,14 lb Tamaño de la caja 50 cm * 50 cm * 60 cm / 19,69 pulgadas * 19,69 pulgadas * 23,62 pulgadas Contenedor de carga 20GP: 177 cajas * 288 uds. = 50976 uds. 40HQ: 412 cajas * 288 piezas = 118656 piezas

Leer Más Menos

1. The portable instrument is automatically powered off after conversion and greatly reduces current consumption during idle periods2. Features: easy to implement, high precision, low current consumption, multi-mode conversion3. Power supply voltage: 2-5.5v4. Working temperature: -40 to 125 degrees celsius5. Programmable data rate: Transmission via I2C compatible serial interface6. Single mode: Automatic shutdown with onboard reference and oscillator7. Size: about 16 x 28mm8. Weight: about 2.5gSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 500 Carton Weight 13.00kgs / 28.66lb Carton Size 47cm * 47cm * 15cm / 18.5inch * 18.5inch * 5.91inch Loading Container 20GP: 804 cartons * 500 pcs = 402000 pcs40HQ: 1868 cartons * 500 pcs = 934000 pcs

Leer Más Menos

1. Material: ABS+PC2. Power consumption: 1.5W3. Suitable for cell phone: for iPhone 6 and above, ios 10 and above, support Android 11.0 and above4. CPU: AM3352BZCZD80 5. WIFI: 802.11 a/b/g/n/ac, 2.4GHz+5.8GHz. 6. Adaptable car models: the original car comes with wired CarPlay or wired Android Auto7. Connection method: LED indicator, USB male port.8. Net weight: about 17g8. Size: X1 about 7 x 3 x 2.5cm, X2 about 7.7 x 3 x 1.3cmFeatures:1. Using automotive-grade chips to ensure the stability and smoothness of the operating environment, low-power module design, low power consumption at work, generating less heat, faster heat dissipation, which is conducive to durable and stable work, the use of the experience is greatly improved, the travel is more enjoyable2. Support wireless CarPlay/Android Auto function, realize sensorless connection between car and cell phone, and support car sharing and control cell phone map/music/telephone APP software3. Wireless WIFI frequency, stable transmission without disconnection4. Intelligent voice assistant, completely free your hands5. Synchronized cell phone music, non-destructive upgrading method, retaining the original sound quality, support a variety of APP music6. HD map, online navigation7. Synchronize with cell phone, support more APP downloads8. Retain the original car functions, no need to change driving habits, plug and play, efficient, real-time transmission, travel safer9. Online upgrade, simple operationSpecification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 15cm * 13cm * 4cm / 5.91inch * 5.12inch * 1.57inch Qty per Carton 50 Carton Weight 2.00kgs / 4.41lb Carton Size 27cm * 23cm * 16cm / 10.63inch * 9.06inch * 6.3inch Loading Container 20GP: 2683 cartons * 50 pcs = 134150 pcs40HQ: 6230 cartons * 50 pcs = 311500 pcs

Leer Más Menos

1. The ESP32-S3-RGB-Matrix is a high-performance, highly integrated LED matrix panel driver board. It is suitable for HUB75 interface RGB matrix panels and related embedded applications. Based on the ESP32-S3 microcontroller, it integrates large-capacity Flash storage, RTC chip, IMU, TF card slot, low-power audio codec chip, dual microphones, and so on. It also provides reserved interfaces such as USB, UART, I2C, and GPIO, offering strong scalability and enabling users to quickly develop and integrate it into practical applications.3. Supports 2.4 GHz Wi-Fi and Bluetooth 5 (BLE) dual-mode communication4. Includes 512KB SRAM and 384KB ROM; integrates 32MB Flash and 16MB PSRAM to meet storage requirements across various scenarios5. Compatible with the full range of Waveshare Matrix-RGB panel sizes; capable of smoothly running graphical interface programs like LVGL6. Onboard ES7210 echo cancellation chip for enhanced voice processing performance7. Onboard ES8311 low-power audio codec chip, supporting high-quality audio input and output8. Equipped with a dual-microphone array supporting noise reduction and echo cancellation algorithms; suitable for applications such as voice recognition and wake-up9. Onboard speaker interface for audio output; allows for direct connection to a speaker10. Integrates the QMI8658 6-axis IMU (3-axis accelerometer + 3-axis gyroscope) for attitude detection11. Integrates the SHTC3 temperature and humidity sensor for precise environmental monitoring12. Onboard Micro SD card slot for storing images, audio, and various data files, facilitating easy data read/write operations13. Onboard PCF85063 RTC chip and reserved SH1.0 battery interface; supports timekeeping during power outages14. Reserved GPIO expansion interface for peripheral expansion and custom functionality, catering to diverse development needs15. Dual power supply interface design; supports stable operation of up to six 64×64 Matrix-RGB panels and allows for cascading expansion to meet large-format display requirements16. Onboard USB Type-C interface for power supply, programming, and debugging17. Onboard RST and BOOT buttons; the BOOT button supports custom functions, enhancing development flexibilitySpecifications:1. Power supply voltage: 5V2. Maximum current capacity: 10A3. Supported resolutions: 64 × 64 | 64 × 32 | 80 × 40 | 96 × 484. Interface type: HUB755. Maximum resolution (cascaded): 6 × 64 × 646. Operating temperature range: -40 ~ +85 degrees Celsius7. Product dimensions: 50 × 42 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 13.10kgs / 28.88lb Carton Size 34cm * 42cm * 32cm / 13.39inch * 16.54inch * 12.6inch Loading Container 20GP: 583 cartons * 120 pcs = 69960 pcs40HQ: 1354 cartons * 120 pcs = 162480 pcs

Leer Más Menos

Raspberry Pi Expansion Board, DC Motor / Stepper Motor DriverFeatures1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. Freescale H-bridge driver MC33886, controls DC motors to turn in both directions3. Onboard 5V regulator, provides power to Raspberry Pi4. Onboard IR receiver, used for remote control robot5. Multi protection circuit, excellent stability- 2A self-recovery fuse, keep your Pi safe- Driver chip features Short-Circuit Shutdown for Large Output Current, Undervoltage Disable Function- Reversed polarity protection for motor output- Anti-reverse diode for power supply6. Power input range: 7V~40V7. Single motor output current: up to 5A8. Power supply current for Raspberry Pi: up to 2AWhats on Board1. Raspberry Pi Expansion Board on board resource2. Raspberry Pi GPIO interface: for connecting Raspberry Pi3. Motor screw terminal: for connecting motors4. External power input5. 74LVC4245AD: voltage level conversion chip, buffer device6. MC33886: motor driver chip7. LM2596-5.0: 5V regulator8. Power indicator9. Raspberry Pi power selection10. OFF: Raspberry Pi powers the Motor Driver Board11. ON: Motor Driver Board powers the Raspberry Pi12. 2A self-recovery fuse13. IR receiver14. Schottky diodes: protects the motor driver15. Power supply anti-reverse diodePackage Contents1. RPi Motor Driver Board x 12. RPi screws pack (2pcs) x 1Specification: Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 9cm * 8cm * 3cm / 3.54inch * 3.15inch * 1.18inch Qty per Carton 390 Carton Weight 21.84kgs / 48.15lb Carton Size 54cm * 40cm * 39cm / 21.26inch * 15.75inch * 15.35inch Loading Container 20GP: 316 cartons * 390 pcs = 123240 pcs40HQ: 734 cartons * 390 pcs = 286260 pcs

Leer Más Menos

Feature1. The tri-band router not only has a higher network speed, but more importantly, it makes the device connection more calm. You can allocate the use of each frequency band according to your habits, and the devices of different frequency bands are used in different categories without interfering with each other. 2. Built-in game accelerator, optimal global acceleration node, effectively reduces game delay and freeze, reduces packet loss, improves PC, console and other multi-platform game experience, and shortens the download time of large games. 3. Support targeted management of the familya mobile phones, tablets and other Internet devices, filter bad URLs and harmful information; also set the usage rights and duration of popular apps, prevent children from indulging in games, short videos, comics, and develop a healthy habit of surfing the Internet . 4. Adopt Qualcomm new generation A73 architecture, 4-core 2.2GHz. It releases a surging computing power of more than 40,000, which is twice the performance of the previous generation flagship processor IPQ8074A (A53 4-core 2.2GHz), and can easily handle dozens of G data transmission and multi-thread task processing. 5. 12 high-gain antennas are equipped with 12 high-power signal amplifiers to increase the signal transmission power and improve the receiving sensitivity at the same time. Super wall-penetrating effect, bringing a good signal to the whole house. 6. USB3.0 high-speed interface, external hard disk can meet the needs of light NAS. Thanks to the powerful processing performance, the transfer rate can reach up to 300MB/s. With 10G and 2.5G network ports, the transfer experience far exceeds that of ordinary Gigabit NAS. Support mobile phone remote download, Baidu network disk download, Samba LAN sharing, Time Machine backup and other functions. 7. Support fast network connection through NFC, no need to remember passwords, let alone enter passwords, and enjoy a fun and fast way to connect to the Internet with visitors and friends. 8. Equipped with dual 10G network ports, it supports free switching between WAN/LAN, and the SFP+ network port can support up to 10G optical/electrical module access, which is easy to implement Whole house 10G optical fiber/network cable networking. The 10G network port is used with 10G NAS to bring an ultra-high-speed 10G transmission experience. 9. Support stable access of 1000+ devices, new support for Docker, which greatly improves playability and scalability; large cache space provides more stable conditions for 10G data transmission and high-speed USB 3.0 transmission. 10. Four 2.5G network ports, support IPTV and game network port customization functions, can not only directly connect game consoles, TVs, computers, meet the high-quality audio and video needs of game players, but also support dual WAN/dual LAN up to 5Gbps aggregation , to fully release the performance of dual 2.5G NAS. 11. The air duct designed by professional thermal simulation, equipped with ultra-quiet fans, and self-developed intelligent temperature control algorithm can automatically adjust the speed according to the power consumption of the whole machine, escorting the flagship performance! Keep the network stable and not stuck.SpecificationsHardware Configuration: 1. Processor: Qualcomm Quad Core A73 2.2GHz 2. Memory: 2GB 3. 2.4G: Wi-Fi 4x4 (theoretical maximum rate can reach 1376.4Mbps) 4. 5.2G: Wi-Fi 4x4 (theoretical maximum rate can reach 5764.8Mbps) 4. 5.8G: Wi-Fi 4x4 (theoretical maximum rate can reach 2882.4Mbps) 5. Antenna: External high-gain antenna + NFC built-in antenna 6. Heat dissipation: active heat dissipation 7. Machine interface: - 4x10/100/1000/2500M adaptive WAN/LAN port - 1x10/100/1000/2500/5000/10000M adaptive WAN/LAN port - 1x1000M/2500M/10000M SFP+Ethernet port - 1xUSB 3.0 port 8. LED indicators: 9 (SYSTEM indicator x 1, INTERNET indicator x 1, network port lights x 6, atmosphere lights x 1) 9. System reset button: 1 10. Power input interface: 1 11. Mesh button: 1 Wireless Parameters: 1. Tri-band: 2.4GHz, 5.2GHz, 5.8GHz 2. Wireless channel: - 2.4GHz Channel: 1,2,3,4,5,6,7,8,9,10,11,12,13 - 5.2GHz Channel: 36,40,44,48,52,56,60,64 - 5.8GHz Channel: 149,153,157,161,165 Software Parameters: 1. Wireless security: WPA-PSK/WPA2-PSK/WPA3-SAE encryption, wireless access control (black and white list), SSID hiding, intelligent anti-fraud network 2. Management application: support Web, Android, IOS Working Environment: 1. Working environment temperature: 0-40 degrees Celsius 2. Working humidity: 10%-90%RH (non-condensing) 3. Storage temperature: -40-70 degrees Celsius 4. Storage humidity: 5%-90%RH (non-condensing)Specification: Package Weight One Package Weight 3.77kgs / 8.31lb One Package Size 36cm * 31cm * 22cm / 14.17inch * 12.2inch * 8.66inch Qty per Carton 1 Carton Weight 4.50kgs / 9.92lb Carton Size 38cm * 33cm * 24cm / 14.96inch * 12.99inch * 9.45inch Loading Container 20GP: 886 cartons * 1 pcs = 886 pcs40HQ: 2056 cartons * 1 pcs = 2056 pcs

Leer Más Menos

Features1. Raspberry Pi camera, supports all revisions of the Pi2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight3. Comes with infrared LED, supports night vision4. 5 megapixel OV5647 sensor5. Adjustable focus distance6. Camera specifications- CCD size: 1/4 inch- Aperture (F): 1.2- Focal Length: 8mm- Angle of View (diagonal): 40 degree- Sensor best resolution: 1080p7. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting infrared LED and/or fill flash LED8. Dimension: 31mm x32mmNote: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableNote: The actual image pixels is 5MP, which depends on the sensor, so it doesnt matter that there is a 3MP silk mark on the camera.Package Contents1. RPi IR-CUT Camera (B) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1Specification: Package Weight One Package Weight 0.07kgs / 0.14lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 36cm * 36cm * 40cm / 14.17inch * 14.17inch * 15.75inch Loading Container 20GP: 514 cartons * 720 pcs = 370080 pcs40HQ: 1194 cartons * 720 pcs = 859680 pcs

Leer Más Menos

1. Suitable for evaluating the Raspberry Pi CM4 Or being integrated into end products 2. Standard CM4 socket, 40PIN GPIO, gigabit ethernet, USB2.0, DSI, CSI, 3.5mm Audio Jack... 3. All in the compact body just as the size of CM4 Specifications: 1. CM4 socket: Suitable for all variants of Compute Module 4 2. Networking: Gigabit Ethernet RJ45 connector 3. Connector: Raspberry Pi 40PIN GPIO header x 1 4. USB: USB 2.0 Type A connector x 1 5. Display: MIPI DSI port x 1 (15pin 1.0mm FPC connector) 6. Camera: MIPI CSI-2 port x 1 (15pin 1.0mm FPC connector) 7. Video: Mini HDMI port x 1, supports 4K 30fps output 8. Audio: 3.5mm jack 9. Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants 10. Power input: 5V 11. Dimension: 56 x 41mm Package list: 1. CM4-NANO-B x 1 3. 2*20PIN color-coded straight pinheader x 1Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 300 pcs = 186000 pcs40HQ: 1439 cartons * 300 pcs = 431700 pcs

Leer Más Menos