Resultados de la búsqueda de "environmental electronics"
-
Waveshare Waveshare ESP32-S3 1.85-Inch LCD Capacitive Touchscreen 360x360 Resolution, 34556
1. Display panel: LCD2. Display size: 1.85 inches3. Resolution: 360 x 3604. Display color: 262K colors5. Display interface: QSPI6. Display driver: ST779167. Touch chip: CST816S8. Touch interface: I2C9. Interface: USB Type-C10. Main control chip: ESP32-S3R811. SRAM / ROM: 512KB SRAM / 384KB ROM12. PSRAM / Flash: 8MB PSRAM / 16MB Flash13. Screen type: TFT LCD14. Screen control chip: Display: ST77916; Touch: CST816S15. On-board equipment:- QMI8658 six-axis sensor- ES8311 audio codec chip- ES7210 echo cancellation algorithm chip- BQ27220 battery detection chip- PCF85063 real-time clock- Dual microphone array- On-board speaker pad - Micro SD- Lithium battery charging and discharging interface16. Exposed interfaces: I2C, UART, USB pads17. Power supply interface: USB Type-C / 3.7V lithium battery interface18. Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240 MHz19. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with built-in antenna20. Built-in 512KB SRAM and 384KB ROM, sealed with 8MB PSRAM and externally connected 16MB Flash21. Adopting Type-C interface, enhancing user convenience and device compatibility22. Equipped with a 1.85-inch capacitive touch high-definition LCD screen, 360 × 360 resolution, 262K color23. Equipped with ST77916 driver chip and CST816S capacitive touch chip, communicating via QSPI and I2C interfaces respectively, occupying fewer interface pin resources24. Equipped with dual microphone arrays, capable of implementing noise reduction and echo cancellation audio algorithms, suitable for precise voice recognition and near-field/far-field voice wake-up applications25. Equipped with QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope)26. Equipped with PWR power switch-off button and BOOT user-defined button, facilitating function development27. Equipped with 3.7V MX1.25 lithium battery charging and discharging interface28. Exposed 1 GPIO, 1 UART and 1 USB interface, available for external devices and debugging use, flexible configuration of peripheral functionsSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 9cm * 9cm * 5cm / 3.54inch * 3.54inch * 1.97inch Qty per Carton 120 Carton Weight 9.50kgs / 20.94lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 120 pcs = 55920 pcs40HQ: 1083 cartons * 120 pcs = 129960 pcs
£36.99
-
BAOFENG Walkie-talkie portátil de banda única BaoFeng BF-9700 de 8 W con función de monitor, enchufe de la UE, BF-9700 Enchufe de la UE
1. Cuerpo mini, compacto y portátil para llevar en el bolsillo. 2. Pantalla de banda única. 3. Rango de frecuencia: 400-470 (MHz) 4. Número de canales: 16 5. Voltaje de funcionamiento: CC 3,7 V 6. Distancia teórica de comunicación: 5-10 km 7. Tipo de comunicación: No se puede insertar la tarjeta Especificación: Peso del paquete Peso de un paquete 0,23 kg/0,50 lb Un tamaño de paquete 18 cm x 6 cm x 5 cm (7,09 pulgadas x 2,36 pulgadas x 1,97 pulgadas) Cantidad por caja 60 Peso de la caja 13,80 kg/30,42 lb Tamaño de la caja 38 cm x 32 cm x 28 cm (14,96 pulgadas x 12,6 pulgadas x 11,02 pulgadas) Contenedor de carga 20GP: 783 cajas * 60 uds. = 46980 uds. 40HQ: 1818 cajas * 60 piezas = 109080 piezas
£19.99
-
LOT 35A 1000V Diode Bridge Rectifier KBPC3510
Dimensions:1 Type:Bridge Rectifier Model Number:KBPC5010 Peak Non-Repetitive Reverse Voltage:1 Application:Motorcycle Mean On-State Current:35A Peak Repetitive Reverse Voltage:1 Unit Type: piece Package Weight: 0.1kg (0.22lb.) Package Size: 8cm x 8cm x 3cm (3.15in x 3.15in x 1.18in)Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 144 Carton Weight 15.00kgs / 33.07lb Carton Size 41cm * 41cm * 15cm / 16.14inch * 16.14inch * 5.91inch Loading Container 20GP: 1057 cartons * 144 pcs = 152208 pcs40HQ: 2455 cartons * 144 pcs = 353520 pcs
£2.99 £0.99
-
Waveshare Waveshare General 1.5 inch 128x128 OLED Display Module, SPI/I2C interface, 13992
1.5inch OLED display Module, 128x128 pixels, 16 gray scale, SPI/I2C interfaceOverviewThis is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.Features1. 128x128 high resolution2. 16 gray scale, better display effect3. Support SPI or I2C interface, configured via onboard resistor4. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Driver: SSD13272. Interface: SPI / I2C3. Display color: White4. Gray scale: 165. Resolution: 128x128 (most other competitive products are typically 128x64)6. Viewing angle: >160 degree7. Operating voltage: 3.3V / 5V8. Dimension: 44.5 x 37 (mm)Package Contents1. 1.5 inch OLED Module x12. PH2.0 7Pin x1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs
£10.99
-
iBRAVEBOX V10 Finder Max+ 4.3 inch Display Digital Satellite Meter Signal Finder, Support DVB-S/S2/S2X AHD, EU Plug, US Plug, UK Plug, AU Plug
1. Fully DVB-S/S2/S2X compliant, Live FTA digital picture and sound. 2. Support AHD CCTV Max 8MP 3. Support H.264/H.265(10 Bit) hardware decoding.4. Digital measuring device for signal strength and quality, supports presetting all satellite information.5. Support AV in and AV/HDMI out function.6. 4.3 inch LCD Colour Screen.7. 4000mAh Lithium-ion battery, normal work up to 4-6 hours. 8. Support 13V/18V/LOCK status panel LED display directly. 9. Support battery power display.10. Software upgradeable via USB and Wifi network (Wifi for MT7601 chip). 11. Supports scan of Auto, Blind, Manual or NIT, Sound for Locking Signal. 12. Supports DISEQC 1.0/1.1/1.2, unicable, 0/22kHz tone, auto calculate angle of AZ, EL.13. Support compass function, speaker integrated. 14. Support real-time power display, with low power reminder. 15. LNB short protect.Main Features:1. System capabilities: Full HD DVB-S/S2/S2X & H.265 Complian, Fully DVB compliant2. Video Decode: AC-3, MPEG-2 MPEG-4 MP HL, H.264 BP MP&HP L4.1, AVS profile L6.1/4.0/2.03. PAL/NTSC: Automatic PAL/NTSC conversion4. Channels Number: 6000 channels TV and Radio programmable5. Favorites: 8 different favorite groups selection6. OSD Language: English, German, French, Portuguese, Spanish, Italian, Russian, Turkish, Polish, Arabic, Farsi, Espanol, Deutsch7. OSD Color: 16-bit OSD with anti-flickering8. Channel Search: Channel search in automatic, manual and network search 9. Channel Edit: Various channel editing function(favorite, move, lock, skip, delete, rename, find, sort) 10. Easy Menu: Plug and Play installation, with an easy to use Menu System11. SoftUpgrade: Software upgrade through USB12. Save Channel: Automatic save for last channel13. Li-on Battery: 4000mAh14. Power Supply: DC12V/1500mA (Input 100V-240V, 50/60Hz)15. Panel display: 4.3 inch LCD Colour Screen16. Output Interface: HDMI(up to 1080P) output, LNB-IN x 2, DV-OUT, AV-OUT, AV-IN, USB, Power supplyElectric Performance1. System resource: Flash Memory: 64MB Serial FlashDDR3 Memory: 1GB DDR32. LNB/Tuner input:Connector: F-type maleFrequency range: 950MHz-2150MHzInput Impedance: 75ΩSignal lever: -65dBm to -25dBmActive Ant Power: 13/18V DC 400mA MAX, Overload ProtectionLNB switch control: 22KHzDiSEqC: Ver 1.0/1.1/1.23. Demodulator:Front end: QPSK(S), QPSK, 8PSK, 16APSK, 32APSK(S2)Modulation range: 2Mbps-45MbpsSCPC and MCPC Capable: YesSpectral inversion: Auto conversionPacking listDigital satellite meter x 1User manual x 1AV cable x 1Car charger cable x 1Adaptor x 1Specification: Package Weight One Package Weight 1.00kgs / 2.20lb One Package Size 23cm * 16cm * 6.5cm / 9.06inch * 6.3inch * 2.56inch Qty per Carton 20 Carton Weight 20.00kgs / 44.09lb Carton Size 48cm * 34cm * 35cm / 18.9inch * 13.39inch * 13.78inch Loading Container 20GP: 466 cartons * 20 pcs = 9320 pcs40HQ: 1083 cartons * 20 pcs = 21660 pcs
£64.99
-
LINEPAUDIO B895 Five-channel Stereo Microphone Mixer with Earphone Monitoring
About The Product1. The B895 is a mini five-channel stereo mixer designed for audio and video applications with independent volume control and earphone/line output. The product has one XLR input, one 1/8 input and three groups stereo RCA inputs. It has enough gain and output level to connect to the power amplifier with RCA or 1 / 8 Jack. 12VDC adapter power supply. Channel 1 has a microphone XLR input with a switchable Phantom Power supply. Channel 2 has 1/8 and RCA input. Channel 3 and channel 4 have RCA jacks. The product can also output 1/8 headset output, can drive up to 600 ohms headphone, with a full frequency response. 2. DC PWR used to connect a DC12V power supply. 3. OUT: stereo RCA jack for connecting mixers or amplifiers. 4. CH 4 and CH 3 INPUT: stereo RCA jack for connecting signal sources such as CD player, tape deck, tuner, computer, mobile phone, tablet, etc. 5. CH 2 input: stereo RCA and a 1/8 jack (parallel) are used to connect signal sources, such as those mentioned in CH 3 and CH 4, or to wireless microphones or musical instruments. CH 1 INPUT: XLR Jack used to connect the microphone. A switchable jumper power source marked on the unit. Line/headphone output: 1/8 stereo jack for connecting sound console, amplifier, or stereo headset. CH 1-4 LEVEL: adjust the volume of each channel.Features1. For mixed microphone XLR input and up to three RCA input signals 2. Input impedance: 10K ohms per jack 3. CH1 gain: 32dB XLR jack (maximum gain) 4. Phantom power: for CH 1 microphone XLR 5. CH2 gain: 26dB 1 / 8 inch and RCA 6. CH 3 and CH 4 gain: each RCA--26dB 7. Output: 1/8 inch stereo and stereo RCA 8. Signal-noise ratio: > 90dB 9. THD: <0.008 10. IMD SMPTE: <0.008 11. Power supply: 12V DC adapterSpecification: General Model B895 Material Metal Product Size 120*70*38mm Weight 320g Package Weight One Package Weight 0.59kgs / 1.30lb One Package Size 22cm * 20cm * 6cm / 8.66inch * 7.87inch * 2.36inch Qty per Carton 20 Carton Weight 11.77kgs / 25.95lb Carton Size 42cm * 38cm * 30cm / 16.54inch * 14.96inch * 11.81inch Loading Container 20GP: 556 cartons * 20 pcs = 11120 pcs40HQ: 1292 cartons * 20 pcs = 25840 pcs
£48.99
-
DS3231 AT24C32 High Precision Clock Module IIC Module Memory Module
1. Size: 38mm (length) X22mm (width) X14mm (height)2. Weight: 8g3. Working voltage: 3.3--5.5V4. Clock chip: High-precision clock chip DS32315. Clock accuracy: Within 0-40 degree C, accuracy 2ppm, annual error about 1 minute6. With 2 calendar alarm clocks7. Programmable square wave output8. Real-time clock generates seconds, minutes, hours, week, date, month and year time, and provides leap year compensation valid to 2100 years9. The temperature sensor inside the chip has an accuracy of +/- 3 degree C10. Memory chip: AT24C32 (storage capacity 32K)11. IIC bus interface, high transmission speed 400KHz (when working voltage is 5V)12. Can cascade other IIC devices, 24C32 address can be modified by short circuit A0 / A1 / A2, the default address is 0x5713. With rechargeable battery LIR2032 to ensure that the clock still runs normally after the system is powered off14. Packing: Single anti-static packaging15. Wiring instructions (taking Arduino uno r3 as an example):SCL -- A5SDA -- A4VCC -- 5VGND -- GND16. DS3231 is a low-cost, high-precision I2C real-time clock (RTC) with integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device contains a battery input, which can maintain accurate timing when the main power is disconnected. The integrated crystal oscillator improves the long-term accuracy of the device and reduces the number of components in the production line. The DS3231 offers commercial and industrial temperature ranges and is available in a 16-pin 300mil SO package.17. RTC saves seconds, minutes, hours, day, date, month and year information. Months less than 31 days will automatically adjust the end of the month, including corrections for leap years. The working format of the clock can be 24 hours or a 12-hour format with / AM / PM indication. Provide two configurable calendar alarms and a configurable square wave output. The address and data are transferred serially via the I2C bidirectional bus.Sophisticated, temperature-compensated voltage reference and comparator circuits are used to monitor VCC status, detect power failures, provide reset outputs, and automatically switch to backup power when necessary. In addition, the / RST monitor pin can be used as a manual input to generate a μP reset.18. In addition to high timing accuracy, the DS3231 also has some other functions that expand the additional functions and selection range of the system host. The device integrates a very accurate digital temperature sensor, which can be accessed through the I2C * interface (just like time). The accuracy of this temperature sensor is +/- 3 degree C. The on-chip control circuit can realize automatic power supply detection and manage the power supply switching between the main power supply and the backup power supply (that is, the low-voltage battery). If the main power supply is powered down, the device can continue to provide accurate timing and temperature without affecting performance. When the main power supply is re-energized or the voltage value returns to the allowable range, the on-chip reset function can be used to restart the system microprocessor.Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 8cm * 5cm * 5cm / 3.15inch * 1.97inch * 1.97inch Qty per Carton 500 Carton Weight 7.00kgs / 15.43lb Carton Size 30cm * 30cm * 38.9cm / 11.81inch * 11.81inch * 15.31inch Loading Container 20GP: 761 cartons * 500 pcs = 380500 pcs40HQ: 1768 cartons * 500 pcs = 884000 pcs
£2.99 £1.99
-
Waveshare Waveshare ESP32-C5 3.5inch Rounded Corner LCD Development Board, IPS Panel, 320 × 480 Resolution, 262K Color, Without Camera, With Built-in Camera
1. ESP32-C5-Touch-LCD-3.5 is a microcontroller development board designed by Waveshare. Onboard 3.5-inch LCD screen, power management chip, 6-axis sensor, temperature and humidity sensor, Micro SD card slot, etc., providing hardware foundation for display, sensing, voice, and multimedia storage. Relying on these hardware, the product can connect to online AI LLM platforms to achieve intelligent voice interaction and visual interaction.2. Adopts ESP32-C5-WROOM-1U series module, equipped with a RISC-V 32-bit processor, main frequency up to 240 MHz.3. Integrated 384 KB SRAM, 320 KB ROM, 8 MB PSRAM, and 32 MB Flash, meeting the needs for program execution, graphical user interfaces, and data storage.4. Integrated 2.4 GHz and 5 GHz dual-band Wi-Fi, Bluetooth 5 (LE), and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, featuring excellent RF performance.5. Onboard camera interface, supporting BF3901 camera.6. Onboard battery charge management module, with a reserved 3.7V MX1.25 lithium battery interface for external battery power supply.7. Uses Type-C interface, improving user convenience and device compatibility.8. Onboard 3.5-inch capacitive touch HD IPS screen, 320 x 480 resolution, 262K colors, capable of displaying color images clearly.9. Built-in ST7796 driver chip and FT6336 capacitive touch chip, using SPI and I2C interfaces for communication respectively, saving interface pin resources.10. Leads out UART, I2C, and some IO interfaces, integrated full-speed USB serial port.11. Onboard QMI8658 6-axis sensor, RTC clock sensor, SHTC3 temperature and humidity sensor, and TF card slot, etc.12. Onboard PWR and BOOT customizable side buttons, convenient for custom feature development using buttons.13. Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker, easily playing with Xiaozhi AI.14. Supports ESP-IDF / Arduino development environments, rich resources, easy to get started.LCD Screen Specifications:1. Display panel: IPS2. Display size: 3.5 inch3. Display resolution: 320 x 480 pixels4. Display color: 262K5. Display brightness: 450 cd/m26. Contrast ratio: 1100:17. Communication interface: SPI8. Driver IC: ST77969. Touch type: Capacitive sensing10. Touch IC: FT6336Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 13cm * 10cm * 5cm / 5.12inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 14.00kgs / 30.86lb Carton Size 45cm * 26cm * 38cm / 17.72inch * 10.24inch * 14.96inch Loading Container 20GP: 599 cartons * 100 pcs = 59900 pcs40HQ: 1392 cartons * 100 pcs = 139200 pcs
£32.99 - £35.99
-
WAVESHARE Waveshare ZED-F9P GPS-RTK HAT Centimeter Level Accuracy Multi-Band RTK Differential GPS Module for Raspberry Pi, ZED-F9P
FeaturesThis is a precise centimeter level Raspberry Pi GNSS HAT based on ZED-F9P. It provides features like multi-band RTK with fast convergence times, high update rate, moving base RTK mode support, concurrent reception of 4 GNSS systems, augment positioning systems support, accurate & fast positioning with minor drifting, and outstanding ability for anti-spoofing & anti-jamming. By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi. 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. Multi-band RTK with fast convergence times, centimeter level accuracy, high update rate 3. Support Moving base RTK mode, enabling terminal precise navigation and centimeter level accuracy 4. Support concurrent receiving 4 GNSS constellations (GPS, BeiDou, Galileo and GLONASS), and still retains low power consumption 5. Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location 6. A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity 7. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing 8. Support U-Center, an easy way to config the module 9. Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts 10. 4x LEDs for indicating the module operating status 11. Come with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)Specification1. ZED-F9P: Concurrent receiving, GPS 2. Frequency band: U-blox F9 platform, GPS L1C/A L2C, SBAS, QZSS, GLONASS L1OF L2OF, BeiDou B1I B2I, Galileo E1B/C E5b 3. Navigation update rate: - PVT: 20Hz - RTK: 25Hz - RAW: 25Hz 4. RTK convergence time: Less than 30s 5. Time-To-First-Fix: - Cold starts: 29s - Hot starts: 2s - Aided starts: 2s 6. Positioning accuracy: - PVT: 1.5m CEP - RTK (horizontal and vertical): 0.01m+1ppm CEP 7. Sensitivity: - Tracking and navigatingV-167 dBm - Re-acquisitionV-160 dBm - Cold starts: -148 dBm - Hot starts: -157 dBm 8. Velocity accuracy: 0.05 m/s 9. Heading accuracy 0.3 degree 10. PPS accuracy: - RMS: 30ns - 99%: 60ns - Jamming: +/-11ns 11. PPS frequency: 0.25Hz ~ 10MHz (configurable) 12. Operational limits: Acceleration (MAX): 4g 13. Altitude (MAX): 50000m 14. Velocity (MAX): 500m/s 15. Communication interface: USB, UART (4800~921600bps, 9600bps by default), I2C (MAX 400KHz), SPI (5MHz) 16. Protocol: NMEA 0183 Version 4.10, UBX, RTCM 3.3 17. Power supply: 5V 18. Overall current: Less than 120mA at 5V (continue mode) 19. Module current: 130mA at 3V (tracking status) 20. Operating temperature: -40 degree C ~ 85 degree C 21. Dimensions: 65mm x 30.5mmPackage List1. ZED-F9P GPS-RTK HAT x 1 2. Multi-band antenna x 1 3. USB-A to Micro-B cable x 1 4. Screws pack x 1 5. 2x20PIN female header x 1Specification: Package Weight One Package Weight 0.36kgs / 0.78lb One Package Size 20cm * 16cm * 5cm / 7.87inch * 6.3inch * 1.97inch Qty per Carton 80 Carton Weight 25.00kgs / 55.12lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 80 pcs = 40000 pcs40HQ: 1162 cartons * 80 pcs = 92960 pcs
£305.99
-
2 In and 2 Out Switcher Volume Controller, RCA signal switches to XLR balanced signal and no need for power supply. It provides RCA and XLR interfaces, independent L/R channel volume adjustment, which is suitable for devices with volume adjustment need
Product function introductionA977 passive preamp active speaker volume dual-channel controller is small in size and suitable for active speakers or preamp/post-amp, it supports full-balance or input and output of single-ended signal. The product has functions of independent L/R channel volume adjustment, 2 signals input and 2 signals output. It provides balanced XLR and unbalanced RCA connectors which are automatically converted to each other, with a selector switch facilitates the signal switch of input/output.Small size, big intelligence. The product is of small size, but has well-function connecters. It is suitable for decoders and speakers without volume adjustment. the product has the design of balanced input/output and RCA input/output architecture, with switching function. The operation of the product will not cause loss of signal source. Generally, the audio signal released from the decoder is the original sound source signal. Great dynamics will not cause loss of sound quality, retaining the complete original signal source.Product parametersInput/output impedance: 10KΩ - 50KΩ2 in 2 out switchover, unbalanced RCA connector and balanced XRL connector for input/outputInput: unbalanced RCA connector / balanced XLR connector (convert selection)Output: unbalanced RCA connector / balanced XLR connector (convert selection)Product net weight: 0.32 kgProduct package weight: 0.42 kgProduct dimensions: length 145mm X width 65mm X height 43mmPackaging dimensions: length 200mm X width 180mm X height 55mmKit list1 X A977 2 In and 3 Out Switcher Full-balance Passive Preamp Active Speaker Double Sound Source Volume ControllerSpecification: Package Weight One Package Weight 0.48kgs / 1.06lb One Package Size 16cm * 16cm * 5.5cm / 6.3inch * 6.3inch * 2.17inch Qty per Carton 35 Carton Weight 15.00kgs / 33.07lb Carton Size 52cm * 52cm * 17cm / 20.47inch * 20.47inch * 6.69inch Loading Container 20GP: 580 cartons * 35 pcs = 20300 pcs40HQ: 1346 cartons * 35 pcs = 47110 pcs
£30.99
-
Calculadora de libros electrónicos con pantalla de 2,4 pulgadas antiespionaje, compatible con grabación de sonido, radio, reproducción de música y video, calculadora científica antiespionaje
1. Multifuncional, no solo tiene función de calculadora, sino que también tiene función de lector de libros electrónicos. 2. Cómoda lectura de libros electrónicos y documentos de texto. 3. Pantalla de privacidad, es difícil que otros lean su pantalla desde un costado. 4. Bloqueo de calculadora con un solo toque, accesos directos a las funciones de la calculadora. Accesos directos desde las funciones de la calculadora a las lecturas de impuestos. 5. Admite carga USB y transferencia de datos. 6. Transfiera fácilmente documentos de texto desde la computadora al dispositivo. 7. Capacidad de la batería: 900 mAh 8. Compatibilidad con reproducción de vídeo: AMV, AVI 9. Reproductor de música: compatible con WMA, WAV, MP3 y otros reproductores. 10. Navegador de imágenes: compatible con JPEG, BMP, GIF 11. Capacidad de almacenamiento: 4 GB + tarjeta de memoria 12. Idiomas admitidos: chino simplificado, chino tradicional, inglés, japonés, coreano, francés, alemán, italiano, holandés, portugués, español, sueco, checo, danés, polaco, ruso, turco, húngaro, rumano, árabe, hebreo, tailandés, indonesio, griego Especificación: General Certificado CE , Hoja de datos de seguridad del material Peso del paquete Peso de un paquete 0,29 kg/0,64 lb Un tamaño de paquete 18 cm x 11 cm x 3 cm (7,09 pulgadas x 4,33 pulgadas x 1,18 pulgadas) Cantidad por caja 50 Peso de la caja 18,50 kg/40,79 lb Tamaño de la caja 37 cm x 28 cm x 49 cm (14,57 pulgadas x 11,02 pulgadas x 19,29 pulgadas) Contenedor de carga 20GP: 525 cajas * 50 uds. = 26250 uds. 40HQ: 1219 cajas * 50 piezas = 60950 piezas
£66.99
-
Waveshare Waveshare 1.69inch ESP32-C5 Touch LCD Development Board, 240 × 280 Pixels, Supporting AI Voice Interaction, Without Lithium Batt
1. Equipped with a high-performance RISC-V 32-bit processor and a low-power RISC-V 32-bit processor; the high-performance processor clock reaches up to 240 MHz, while the low-power processor clock reaches up to 48 MHz.2. Integrates Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, delivering excellent RF performance.3. Package built-in 8MB PSRAM and external 16MB Flash memory.4. Uses a Type-C connector, eliminating worry about plug orientation.5. Onboard 1.69-inch capacitive touch LCD screen with 240 x 280 resolution and 262K colors for clear displaying of colorful images.6. Built-in ST7789V2 driver chip and CST816T capacitive touch chip, communicating via SPI and I2C interfaces respectively, without occupying excessive interface pin resources.7. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope).8. Onboard PCF85063 RTC chip for easy implementation of Real-Time Clock functions.9. Onboard RST, BOOT, and PWR power-on/off buttons.10. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.11. Onboard ES8311 audio codec chip, microphone, and speaker interface, easily enabling Xiaozhi AI voice features.12. Routes out GPIO, I2C, USB, and UART pads for external device connection and debugging, allowing flexible peripheral configuration.13. Supports precise control such as flexible clock settings and independent module power configuration to achieve low-power modes across multiple scenarios.14. Touchscreen features high light transmittance, fast response, and long lifespan.LCD Screen Parameters:1. Display Panel: IPS2. Display Size: 1.69 inches3. Display Resolution: 240 x 280 pixels4. Display Colors: 262K5. Display Brightness: 435 cd/m26. Contrast Ratio: 315:17. Communication Interface: SPI8. Driver IC: ST7789V29. Touch Type: Capacitive Sensing10. Touch IC: CST816TSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 300 Carton Weight 16.10kgs / 35.49lb Carton Size 32cm * 32cm * 50cm / 12.6inch * 12.6inch * 19.69inch Loading Container 20GP: 520 cartons * 300 pcs = 156000 pcs40HQ: 1209 cartons * 300 pcs = 362700 pcs
£24.99